1488 VT/OIL Copolymer Resin | Gabriel Performance Products | 1488 VT/OIL COPOLYMER RESIN is a vinyl toluene/oil copolymer resin supplied at 60% non-volatile in VM&P Naphtha. This resin is used in the manufacture of fast air drying machinery enamels and primers. Products made with this resin dry primarily by evapora...展开 1488 VT/OIL COPOLYMER RESIN is a vinyl toluene/oil copolymer resin supplied at 60% non-volatile in VM&P Naphtha. This resin is used in the manufacture of fast air drying machinery enamels and primers. Products made with this resin dry primarily by evaporation or solvent from the applied coatings surface. To improve the mar resistance of the coating, approximately 10% melamine resin is added and cured for 20 minutes at 250°F (121°C). 收起 | |
ACRODUR® 950 L | BASF Dispersions & Resins | Acrodur® 950L is a solution polymer for thermoset nonwoven applications that provides excellent heat resistance and stiffness. It is recommended for use in insulation, abrasives, ceiling tiles, wall coverings, and specialty glass applications. This produc...展开 Acrodur® 950L is a solution polymer for thermoset nonwoven applications that provides excellent heat resistance and stiffness. It is recommended for use in insulation, abrasives, ceiling tiles, wall coverings, and specialty glass applications. This product can be used as a crosslinker. 收起 | |
ACRODUR® DS 3515 | BASF Dispersions & Resins | Acrodur® DS 3515 is a dispersion polymer for thermoset nonwoven applications that provides excellent thermal stability, flex modulus, and hydrophobicity. For use in coated abrasives and abrasive nonwovens, insulation, ceiling tiles, wall coverings, and sp...展开 Acrodur® DS 3515 is a dispersion polymer for thermoset nonwoven applications that provides excellent thermal stability, flex modulus, and hydrophobicity. For use in coated abrasives and abrasive nonwovens, insulation, ceiling tiles, wall coverings, and specialty glass applications. 收起 | |
ACRODUR® DS 3530 | BASF Dispersions & Resins | Acrodur® DS 3530 is a thermosetting solution polymer with low viscosity that provides excellent thermal stability and stiffness for nonwovens. For use in insulation, ceiling tiles, and specialty glass applications. | |
ACRODUR® DS 3558 | BASF Dispersions & Resins | Acrodur® DS 3558 is a styrene-acrylic dispersion polymer that provides a tough-elastic thermoset with good flexibility, excellent thermal resistance, and excellent hydrophobicity. For use in nonwoven filtration, abrasives, ceiling tiles, wall coverings, a...展开 Acrodur® DS 3558 is a styrene-acrylic dispersion polymer that provides a tough-elastic thermoset with good flexibility, excellent thermal resistance, and excellent hydrophobicity. For use in nonwoven filtration, abrasives, ceiling tiles, wall coverings, and specialty glass applications. 收起 | |
ACRONAL® 296 D NA | BASF Dispersions & Resins | Acronal® 296 D na is an aqueous butyl acrylate-styrene copolymer dispersion used to produce all types of adhesives, coatings, textured finishes, and surfacing compounds. It is used for producing high-gloss to flat coatings for application on plaster, maso...展开 Acronal® 296 D na is an aqueous butyl acrylate-styrene copolymer dispersion used to produce all types of adhesives, coatings, textured finishes, and surfacing compounds. It is used for producing high-gloss to flat coatings for application on plaster, masonry, fibrous cement, concrete, and other indoor and outdoor substrates. Moreover, its high pigment binding capacity makes Acronal® 296 D na an ideal candidate for textured coatings and masonry paints. The high pigment binding capacity allows Acronal® 296 D na to replace vinyl acrylics in many applications with improved performance at the same formulated cost. 收起 | |
ACRONAL® 4040 | BASF Dispersions & Resins | Acronal® 4040 is a styrene-acrylic copolymer designed for water-based concrete cure and seal coatings to deliver both benefits of a curing agent and sealer in a single coating application. Acronal® 4040 can be formulated into fast drying coatings which th...展开 Acronal® 4040 is a styrene-acrylic copolymer designed for water-based concrete cure and seal coatings to deliver both benefits of a curing agent and sealer in a single coating application. Acronal® 4040 can be formulated into fast drying coatings which then exhibit excellent water retention (according to ASTM C 1315), alkali and acid resistance, strong adhesion to concrete, and excellent final coating appearance. 收起 | |
ACRONAL® 4311 X | BASF Dispersions & Resins | Acronal® 4311 is an acrylic dispersion for translucent sealants meeting ASTM C 290 performance. It imparts superior water resistance. | |
ACRONAL® NS 567 | BASF Dispersions & Resins | Acronal® NS 567 is an acrylic dispersion for economical elastomeric white roof coatings. Provides high strength, elongation, and good dirt pick-up resistance. | |
ACRONAL® NX 4627 X | BASF Dispersions & Resins | Acronal® NX 4627 is a neutral styrene acrylic copolymer designed to be used in anionic or cationic asphalt emulsion applications such as fog seals or reduced tracking bond coats. It is APEO and ammonia free. | |
ACRONAL® NX 4787 | BASF Dispersions & Resins | Acronal® 4787 is an all purpose styrene acrylic used in adhesives, primers and coatings. It provides high strength, adhesion and water/alkali resistance. This product has low viscosity and is non-APEO. | |
ACRONAL® S 400 NA | BASF Dispersions & Resins | Acronal S 400 NA is an acrylic dispersion offering excellent crack bridging performance for flexible cementitious roof coatings. | |
ACRONAL® S 760 NA | BASF Dispersions & Resins | Acronal® S 760 na is an acrylic dispersion for use in corrosion resistant primers and coatings. Provides excellent water and alkali resistance. | |
Akuabrid CRA 1610 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid CRA 1610 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and ...展开 Akuabrid CRA 1610 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and wood coatings and adhesives. 收起 | |
Akuabrid HM 1153 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid HM 1153 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good hydrolysis resistance and mechanical properties and is ideal for use in plastic, metal, and wood coating applications. | |
Akuabrid HM 2124 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid HM 2124 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good hydrolysis resistance and mechanical properties and is ideal for use in plastic, metal, and wood coating applications. | |
Akuabrid HM 4001 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid HM 4001 is a high modulus, solvent-free, liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good water resistance and is ideal for use in plastic, metal, and wood coating applications. | |
Akuabrid HM 6552A | T&L Co., Ltd. Polymer Technology Centre | Akuabrid HM 6552A is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. It displays excellent hydrolysis and rub resistances, good solvent resistance and mechanical properties, and high surface hardness. This product is ide...展开 Akuabrid HM 6552A is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. It displays excellent hydrolysis and rub resistances, good solvent resistance and mechanical properties, and high surface hardness. This product is ideal for use in plastic, metal, and wood coating applications. 收起 | |
Akuabrid HM 6560 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid HM 6560 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. It displays excellent hydrolysis and rub resistances, good solvent resistance and mechanical properties, and high surface hardness. This product is idea...展开 Akuabrid HM 6560 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. It displays excellent hydrolysis and rub resistances, good solvent resistance and mechanical properties, and high surface hardness. This product is ideal for use in plastic, metal, and wood coating applications. 收起 | |
Akuabrid HM 6574 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid HM 6574 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. It displays excellent hydrolysis and rub resistances, good solvent resistance and mechanical properties, and high surface hardness. This product is idea...展开 Akuabrid HM 6574 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. It displays excellent hydrolysis and rub resistances, good solvent resistance and mechanical properties, and high surface hardness. This product is ideal for use in plastic, metal, and wood coating applications. 收起 | |
Akuabrid HS 019 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid HS 019 is a milky, semi-clear, liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product is ideal for use in non-toxic coatings for toys, household supplies, textiles, and plastics. | |
Akuabrid HS 070 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid HS 070 is a milky, semi-clear, liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product is ideal for use in non-toxic coatings for toys, household supplies, textiles, and plastics. | |
Akuabrid PH 1200 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid PH 1200 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and w...展开 Akuabrid PH 1200 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and wood coatings and adhesives. 收起 | |
AR-511 | Chan Sieh Enterprises Co, Ltd. | AR-511 is a styrene copolymer acrylic resin. This product has good hardness, is clear and flexible, and provides outdoor durability. It can be used in road paints, marine paints, exterior coatings, and metal paints. AR-511 is soluble in ketones, aromat...展开 AR-511 is a styrene copolymer acrylic resin. This product has good hardness, is clear and flexible, and provides outdoor durability. It can be used in road paints, marine paints, exterior coatings, and metal paints. AR-511 is soluble in ketones, aromatics, and esters. 收起 | |
AR-514 | Chan Sieh Enterprises Co, Ltd. | AR-514 is a styrene copolymer acrylic resin. This product provides chemical resistance, and has good properties on asphalt and concrete. It can be used in concrete paints, road paints, and plastic coatings. AR-514 is solvent in alcohols, ketones, aroma...展开 AR-514 is a styrene copolymer acrylic resin. This product provides chemical resistance, and has good properties on asphalt and concrete. It can be used in concrete paints, road paints, and plastic coatings. AR-514 is solvent in alcohols, ketones, aromatics, and esters. 收起 | |
AR-517 | Chan Sieh Enterprises Co, Ltd. | AR-517 is a styrene-acrylic copolymer resin that displays good hardness, high gloss, and good chemical resistance. This product can be used in paints and coatings for road marking, marine, concrete, and interior and exterior wall applications. | |
AR-518 | Chan Sieh Enterprises Co, Ltd. | AR-518 is a styrene copolymer acrylic resin. This product has high gloss, and provides both heat- and chemical-resistance. It can be used in topcoats and primers for aluminum, and in inks. AR-518 is solvent in ketones, aromatics, and esters. | |
Aromatic Urethane Hexaacrylate SM6329 | Jiangsu Sanmu Group Corporation | SM6329是一种芳香族聚氨酯六丙烯酸酯。它提供了很高的反应性和硬度,并提供了耐磨性和耐化学性。SM6329广泛用于UV固化涂料、粘合剂和油墨。 | |
BarrierPro® 4545 | Mallard Creek Polymers, Inc. | BarrierPro® 4545 is a general purpose latex binder of medium to high stiffness. It dries to form a flexible, tough film of high water resistance. BarrierPro® 4545 can be compounded with fillers and other additives to form coatings for a variety of applica...展开 BarrierPro® 4545 is a general purpose latex binder of medium to high stiffness. It dries to form a flexible, tough film of high water resistance. BarrierPro® 4545 can be compounded with fillers and other additives to form coatings for a variety of applications. Because of its high strength film, it makes an excellent product for blending with other BarrierPro® products to strengthen waterproof membranes, specialty paints, and sealants. 收起 | |
BarrierPro® 4550 | Mallard Creek Polymers, Inc. | BarrierPro® 4550 is a general purpose latex binder of medium stiffness. It dries to form a flexible, tough film of high water resistance. BarrierPro® 4550 can be compounded with fillers and other additives to form coatings for a variety of applications su...展开 BarrierPro® 4550 is a general purpose latex binder of medium stiffness. It dries to form a flexible, tough film of high water resistance. BarrierPro® 4550 can be compounded with fillers and other additives to form coatings for a variety of applications such as damp proof membranes, specialty paints and sealants. 收起 | |
BarrierPro® 4551 | Mallard Creek Polymers, Inc. | BarrierPro® 4551 is a carboxylated styrenebutadiene emulsion with excellent strength properties, high resistance to liquid water and water vapor, high blush resistance and excellent adhesion to multiple construction substrates. BarrierPro® 4551 has excell...展开 BarrierPro® 4551 is a carboxylated styrenebutadiene emulsion with excellent strength properties, high resistance to liquid water and water vapor, high blush resistance and excellent adhesion to multiple construction substrates. BarrierPro® 4551 has excellent stability with dry-add inorganic fillers and sets quickly into a low tack, high strength, water resistant film. BarrierPro® 4551 is also a good base polymer for blending with other BarrierPro® products to allow a membrane to be custom tailored to a specific strength and/or flexibility need. 收起 | |
BarrierPro® 4555 | Mallard Creek Polymers, Inc. | BarrierPro® 4555 is a general purpose latex binder of low stiffness. It dries to form a soft but tough film. Its softness makes it excellent for damp proofing where films must remain flexible at below freezing temperatures. | |
Baybond® 140 AQ | Covestro | Baybond® 140 AQ has anionic dispersion of an aliphatic polyester urethane resin used as a film-building component in glass fiber sizings. Its polyurethane dispersion is suitable for use as a film-building component in glass fiber sizings. As with any prod...展开 Baybond® 140 AQ has anionic dispersion of an aliphatic polyester urethane resin used as a film-building component in glass fiber sizings. Its polyurethane dispersion is suitable for use as a film-building component in glass fiber sizings. As with any product, use of Baybond® 140 AQ in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. 收起 | |
Baybond® PU 130 | Covestro | Baybond® PU 130 has anionic/non-ionic crosslinking polyether urethane polymer, used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing, and is useful for the sizing of glass fibers u...展开 Baybond® PU 130 has anionic/non-ionic crosslinking polyether urethane polymer, used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing, and is useful for the sizing of glass fibers used to reinforce thermoplastics, especially polyamide. Glass fiber sizes based on Baybond® PU 130 have excellent filmforming properties and adhesion. This product also exhibits very good colorfastness at high temperatures and is also highly resistant to hydrolysis. Full mechanical properties of Baybond® PU 130 are developed by post-crosslinking for 20 minutes @ 170C. As with any product, use of Baybond® PU 130 in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. 收起 | |
Baybond® PU 330 | Covestro | Baybond® PU 330 has anionic, non-ionic polyester urethane polymer, used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing, especially for glass fibers used to reinforce thermosets. G...展开 Baybond® PU 330 has anionic, non-ionic polyester urethane polymer, used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing, especially for glass fibers used to reinforce thermosets. Glass fiber sizes based on Baybond® PU 330 have excellent filmforming properties and adhesion. This product also remains stable when exposed to shear forces. As with any product, use of Baybond® PU 330 in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. 收起 | |
Baybond® PU 401 A | Covestro | Baybond® PU 401 A has anionic, non-ionic polyester urethane polymer, used as the film-forming component in glass fiber sizes. Commonly used as the film-forming component in glass fiber sizing. Glass fiber sizes based on its polyurethane dispersion have ex...展开 Baybond® PU 401 A has anionic, non-ionic polyester urethane polymer, used as the film-forming component in glass fiber sizes. Commonly used as the film-forming component in glass fiber sizing. Glass fiber sizes based on its polyurethane dispersion have excellent film-forming properties and very good adhesion. As with any product, use of Baybond® PU 401 A polyurethane dispersion in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. 收起 | |
Baybond® PU 402 A | Covestro | Baybond® PU 402 A has anionic/non-ionic polyester urethane polymer used as the film-forming component in glass fiber sizes. It was developed for the sizing of glass fibers used to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based o...展开 Baybond® PU 402 A has anionic/non-ionic polyester urethane polymer used as the film-forming component in glass fiber sizes. It was developed for the sizing of glass fibers used to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® PU 402 A are characterized by their outstanding film-forming properties and very good adhesion. They have high colorfastness, even at elevated temperatures. Baybond® PU 402 A is also very stable against shear forces. As with any product, use of Baybond® PU 402 A in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability 收起 | |
Baybond® PU 403 | Covestro | Baybond® PU 403 has anionic, non-ionic polyester urethane polymer, used as the film forming component in glass fiber sizes. Its polyurethane disperson is commonly used as the film-forming component in glass fiber sizing. Glass fiber sizes based on Baybond...展开 Baybond® PU 403 has anionic, non-ionic polyester urethane polymer, used as the film forming component in glass fiber sizes. Its polyurethane disperson is commonly used as the film-forming component in glass fiber sizing. Glass fiber sizes based on Baybond PU® 403 have excellent film-forming properties, and very good adhesion. The mechanical properties of Baybond® PU 403 are improved by post-curing at 150ºC or above for 30 minutes. As with any product, Baybond® PU 403 polyurethane dispersion in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. 收起 | |
Bayhydrol® U 355 | Covestro | Bayhydrol® U 355 is an aliphatic, hydroxyfunctional polyester polyurethane dispersion used as a binder for the formulation of water-thinnable soft-feel coatings. | |
Bayhydrol® U 475 | Covestro | Bayhydrol® U 475 is an aliphatic, hydroxyfunctional polyester polyurethane resin used as a binder for the formulation of water-thinnable soft-touch coatings. | |
BECKOSOL AQ® 510 | Polynt Composites | BECKOSOL AQ® 510, in the form of a milky white liquid, is an oil-based alkyd/acrylic copolymer hybrid that can be used in architectural primers and a range of architectural enamels from satin to semi-gloss styles. This product has good enamel hold out, is...展开 BECKOSOL AQ® 510, in the form of a milky white liquid, is an oil-based alkyd/acrylic copolymer hybrid that can be used in architectural primers and a range of architectural enamels from satin to semi-gloss styles. This product has good enamel hold out, is solvent free, and will formulate like a latex resin with soap and water cleanup. 收起 | |
Betapag | Grupo Petroquimico Beta SA de CV | Betapag is a commercial brand of polyalkyleneglycols (PAG) from Group Petrochemical Beta. The polyalkyleneglycols are copolymers from EO and PO that are used in the industry for synthetic lubricants that offer high quality lubrication, high viscosity con...展开 Betapag is a commercial brand of polyalkyleneglycols (PAG) from Group Petrochemical Beta. The polyalkyleneglycols are copolymers from EO and PO that are used in the industry for synthetic lubricants that offer high quality lubrication, high viscosity contents and good stability to temperature. 收起 | |
Betapag D | Grupo Petroquimico Beta SA de CV | Betapag D is a commercial brand of polyalkyleneglycols (PAG) from Group Petrochemical Beta. The polyalkyleneglycols are copolymers from EO and PO that are used in the industry for synthetic lubricants that offer high quality lubrication, high viscosity co...展开 Betapag D is a commercial brand of polyalkyleneglycols (PAG) from Group Petrochemical Beta. The polyalkyleneglycols are copolymers from EO and PO that are used in the industry for synthetic lubricants that offer high quality lubrication, high viscosity contents and good stability to temperature. 收起 | |
Bitoner® Resin TR-100 | Qingdao Bater Chemical Co., Ltd. | Bitoner® Resin TR-100, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, C9 and C5 co-polymerized resin. It has low odor, low volatility, good heat stability, good compatibility, water resistance, and has recommended appli...展开 Bitoner® Resin TR-100, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, C9 and C5 co-polymerized resin. It has low odor, low volatility, good heat stability, good compatibility, water resistance, and has recommended applications in sealants, coatings, hot melt adhesives, PSA, and rubber compounds. 收起 | |
Bitoner® Resin TR-2080 | Qingdao Bater Chemical Co., Ltd. | Bitoner® Resin TR-2080, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, C9 and C5 co-polymerized resin. It has low odor, low volatility, good heat resistance, good compatibility, water resistance, and has recommended app...展开 Bitoner® Resin TR-2080, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, C9 and C5 co-polymerized resin. It has low odor, low volatility, good heat resistance, good compatibility, water resistance, and has recommended applications in sealants, coatings, hot melt adhesives, PSA, and rubber compounds. 收起 | |
Borchi® Gen 1252 | Borchers, A Company of OMG | Borchi® Gen 1252是一种100%丙烯酸酯共聚物,具有出色的润湿性和抗絮凝性能。它特别推荐用于高品质木材、装饰漆和工业漆。它与树脂广泛兼容,很适合用于制备含和不含研磨树脂的水性和溶剂型颜料浓缩浆 | |
Borchi® Gen 1253 | Borchers, A Company of OMG | Borchi® Gen 1253是一种丙烯酸酯共聚物的水溶液,具有出色的湿润性和抗絮凝性能。这是一个高效添加剂,可润湿、分散和稳定高档水性应用中的颜料。由于解絮凝后颜料的粒径小,可获得出色的展色力和高光泽度。油漆和颜料色浆即使经过长时间的存放,Borchi® Gen 1253也可防止其沉降和重新絮凝。此外,这款产品不含有机溶剂,完全不含VOC。 | |
Borchi® Gen 1350 | Borchers, A Company of OMG | Borchi® Gen 1350是一种酸聚氨酯共聚物的水溶液,具有出色的湿润性和抗絮凝性能。它特别推荐用于高品质木材、装饰漆和工业漆。它与树脂广泛兼容,很适合用于制备水性颜料浓缩浆。Borchi® Gen 1350可为透明氧化铁颜料以及有机颜料和无机颜料提供高分散和稳定能力。 | |
BUTANOL® NS 104 | BASF Dispersions & Resins | Butanol® NS 104 is an extensible, high molecular weight, resin-oil compatible styrene butadiene dispersion suitable for flooring adhesives and asphaltic emulsion waterproofing. It promotes webbing/legging. This product also improves elasticity and flexibi...展开 Butanol® NS 104 is an extensible, high molecular weight, resin-oil compatible styrene butadiene dispersion suitable for flooring adhesives and asphaltic emulsion waterproofing. It promotes webbing/legging. This product also improves elasticity and flexibility at low temperatures. It is non-APEO and non-ammonia. 收起 | |
BUTANOL® NS 198 | BASF Dispersions & Resins | Butanol® NS 198 is a cationic, high molecular weight styrene butadiene dispersion designed for use in asphalt modification and waterproofing. It improves strength, ductility and flexibility. This product is non-APEO and non-ammonia. | |
BUTOFAN® NS 209 | BASF Dispersions & Resins | Butofan® NS 209 is a carboxylated styrene-butadiene binder with a good balance of tensile strength and elongation and excellent barrier properties. It is suitable for use with cellulosic materials, cellulosic filters, gaskets and felts, flooring adhesives...展开 Butofan® NS 209 is a carboxylated styrene-butadiene binder with a good balance of tensile strength and elongation and excellent barrier properties. It is suitable for use with cellulosic materials, cellulosic filters, gaskets and felts, flooring adhesives and as saturant for masking tapes. 收起 | |
BUTOFAN® NS 299 | BASF Dispersions & Resins | Butofan® NS 299 is an aqueous aqueous non-carboxylated butadiene-styrene copolymer dispersion for use in flooring adhesives and asphalt modification. | |
BUTONAL® 2230 | BASF Dispersions & Resins | Butonal® 2230 is a cold polymerized, non-carboxylated fatty acid stabilized styrene-butadiene copolymer used in the manufacture of can sealing compounds. | |
BUTONAL® 4125 X | BASF Dispersions & Resins | Butonal® 4125 X is a cold polymerized, non-carboxylated, fatty acid stabilized styrene-butadiene copolymer for use in the manufacture of flooring adhesives and latex foam. | |
BUTONAL® 4131 X | BASF Dispersions & Resins | Butonal® 4131 X is a cold polymerized, non-carboxylated, fatty acid stabilized styrene-butadiene copolymer for use in the manufacture of flooring adhesives and latex foam. | |
BUTONAL® NX 1129 | BASF Dispersions & Resins | Butonal® NX 1129 is an anionic, crosslinking styrene butadiene dispersion which improves hot asphalt and asphalt emulsion binders to meet SHRP + specifications. APEO- and ammonia-free. | |
BUTONAL® NX 4190 | BASF Dispersions & Resins | Butonal® NX 4190 is a cationic, crosslinking styrene butadiene dispersion used in premium chip seals and micro-surfacing asphalt emulsions. It is APEO and ammonia free. | |
BYD2301 | Tianyi Chemical Engineering Material Co., Ltd. | BYD2301, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in electrostatic flocking of textiles. This product is resistant to yellowing, alkaline substrates, and water. Its pH value is 8.0 +/- 1.0. | |
BYD2302 | Tianyi Chemical Engineering Material Co., Ltd. | BYD2302, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in the production of soft polyester wadding. This product is resistant to yellowing, alkaline substrates, and water. Its pH value is 6.0 +/- 1.0. | |
BYD2303 | Tianyi Chemical Engineering Material Co., Ltd. | BYD2303, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in gold prints for textiles. This product is resistant to yellowing, alkaline substrates, and water. Its pH value is 8.0 +/- 1.0. | |
BYD2600 | Tianyi Chemical Engineering Material Co., Ltd. | BYD2600, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in pressure-sensitive adhesive tape applications, particularly for polypropylene films. This product is resistant to yellowing, alkaline substrates, an...展开 BYD2600, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in pressure-sensitive adhesive tape applications, particularly for polypropylene films. This product is resistant to yellowing, alkaline substrates, and water. Its pH value is 8.0 +/- 1.0. 收起 | |
BYD2610 | Tianyi Chemical Engineering Material Co., Ltd. | BYD2610, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in weatherproof exterior wall coatings and high-quality interior wall coatings. This product is resistant to yellowing, alkaline substrates, and water....展开 BYD2610, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in weatherproof exterior wall coatings and high-quality interior wall coatings. This product is resistant to yellowing, alkaline substrates, and water. Its pH value is 8.0 +/- 1.0. 收起 | |
BYD2620 | Tianyi Chemical Engineering Material Co., Ltd. | BYD2620, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in high quality exterior wall coatings and stain-resistant interior wall coatings. This product is resistant to yellowing, alkaline substrates, and wat...展开 BYD2620, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in high quality exterior wall coatings and stain-resistant interior wall coatings. This product is resistant to yellowing, alkaline substrates, and water. Its pH value is 8.0 +/- 1.0. 收起 | |
BYD2630 | Tianyi Chemical Engineering Material Co., Ltd. | BYD2630, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in elastic interior or exterior wall coatings, and in gigging coatings. This product is resistant to yellowing, alkaline substrates, and water. Its pH...展开 BYD2630, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in elastic interior or exterior wall coatings, and in gigging coatings. This product is resistant to yellowing, alkaline substrates, and water. Its pH value is 8.0 +/- 1.0. 收起 | |
BYD2640 | Tianyi Chemical Engineering Material Co., Ltd. | BYD2640, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in waterborne anti-corrosive primers for metal substrates. This product is resistant to yellowing, alkaline substrates, and water. Its pH value is 8.0...展开 BYD2640, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in waterborne anti-corrosive primers for metal substrates. This product is resistant to yellowing, alkaline substrates, and water. Its pH value is 8.0 +/- 1.0. 收起 | |
BYD3053 | Tianyi Chemical Engineering Material Co., Ltd. | BYD3053, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in alkaline-resistant exterior wall coatings and sealer primers for construction applications. This product is waterproof and alkali-resistant....展开 BYD3053, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in alkaline-resistant exterior wall coatings and sealer primers for construction applications. This product is waterproof and alkali-resistant. It is compatible with color pastes and cements. 收起 | |
BYD3064 | Tianyi Chemical Engineering Material Co., Ltd. | BYD3064, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in sealer primers for construction applications. This product is waterproof and alkali-resistant. It is compatible with color pastes and cemen...展开 BYD3064, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in sealer primers for construction applications. This product is waterproof and alkali-resistant. It is compatible with color pastes and cements. 收起 | |
BYD3101 | Tianyi Chemical Engineering Material Co., Ltd. | BYD3101, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in solidified printing pastes for textile applications. This product is waterproof and alkali-resistant. It is compatible with color pastes and...展开 BYD3101, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in solidified printing pastes for textile applications. This product is waterproof and alkali-resistant. It is compatible with color pastes and cements. 收起 | |
BYD3102 | Tianyi Chemical Engineering Material Co., Ltd. | BYD3102, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in non-woven fabric adhesives. This product is waterproof and alkali-resistant. It is compatible with color pastes and cements. | |
BYD3510 | Tianyi Chemical Engineering Material Co., Ltd. | BYD3510, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in elastic interior or exterior wall coatings, gigging coatings, and one-component waterproof coatings. This product is waterproof and alkali-r...展开 BYD3510, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in elastic interior or exterior wall coatings, gigging coatings, and one-component waterproof coatings. This product is waterproof and alkali-resistant. It is compatible with color pastes and cements. 收起 | |
BYD3520 | Tianyi Chemical Engineering Material Co., Ltd. | BYD3520, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in two-component waterproof coatings. This product is waterproof and alkali-resistant. It is compatible with color pastes and cements. | |
BYD3910 | Tianyi Chemical Engineering Material Co., Ltd. | BYD3910, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in exterior wall coatings, stone coatings, and textured coatings. This product is waterproof and alkali-resistant. It is compatible with color...展开 BYD3910, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in exterior wall coatings, stone coatings, and textured coatings. This product is waterproof and alkali-resistant. It is compatible with color pastes and cements. 收起 | |
BYD3928 | Tianyi Chemical Engineering Material Co., Ltd. | BYD3928, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in stone coatings, relief coatings and both exterior and interior wall coatings. This product is waterproof and alkali-resistant. It is compat...展开 BYD3928, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in stone coatings, relief coatings and both exterior and interior wall coatings. This product is waterproof and alkali-resistant. It is compatible with color pastes and cements. 收起 | |
BYD3998 | Tianyi Chemical Engineering Material Co., Ltd. | BYD3998, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolmer that can be used in exterior and interior wall coatings. This product is waterproof and alkali-resistant. It is compatible with color pastes and cements. | |
BYD5105 | Tianyi Chemical Engineering Material Co., Ltd. | BYD5105, in the form of a white, waterborne anionic emulsion, is a vinyl acrylic copolymer that can be used in textiles to make them stiffer and smoother. This product offers excellent yellowing resistance and is APEO free. Its pH value is 4.0 +/- 1.0. | |
BYD5110 | Tianyi Chemical Engineering Material Co., Ltd. | BYD5110, in the form of a white, waterborne anionic emulsion, is a vinyl acrylic copolymer that can be used in Mercerized interior wall coatings and PVC interior coatings. This product carries pigment well and is compatible with color pastes. Its pH val...展开 BYD5110, in the form of a white, waterborne anionic emulsion, is a vinyl acrylic copolymer that can be used in Mercerized interior wall coatings and PVC interior coatings. This product carries pigment well and is compatible with color pastes. Its pH value is 4.0 +/- 1.0. 收起 | |
BYD8001 | Tianyi Chemical Engineering Material Co., Ltd. | BYD8001, in the form of a waterborne, white anionic emulsion, is a silicone acrylic copolymer that can be used in exterior wall coatings, natural stone coatings, and top coats. This product has yellowing and water resistance, color retention, and stain r...展开 BYD8001, in the form of a waterborne, white anionic emulsion, is a silicone acrylic copolymer that can be used in exterior wall coatings, natural stone coatings, and top coats. This product has yellowing and water resistance, color retention, and stain resistance. Its pH value is 9.0 +/- 1.0. 收起 | |
BYD8600 | Tianyi Chemical Engineering Material Co., Ltd. | BYD8600, in the form of a waterborne, white anionic emulsion, is a silicone acrylic copolymer that can be used as a surface coating for textile applications. This product is hydrophobic and retains its gloss well. Its pH value is 7.0 +/- 1.0. | |
Carboset® AMO 400 | Lubrizol Advanced Materials, Inc. | Carboset® AMO 400 is a non-oxidative, self-crosslinking acrylic modified oil copolymer dispersion with 50% renewable content. Carboset® AMO 400 is APEO free, solvent free and can be formulated to ultra low VOC for wood coatings applications. Carboset® AMO...展开 Carboset® AMO 400 is a non-oxidative, self-crosslinking acrylic modified oil copolymer dispersion with 50% renewable content. Carboset® AMO 400 is APEO free, solvent free and can be formulated to ultra low VOC for wood coatings applications. Carboset® AMO 400’s patented oil modification brings unique properties to finishes. Its longer open times are combined with fast drying to produce superior wiping stains. Carboset® AMO 400 also produces excellent sanding sealers with non-gumming sandability even with high intensity machines along with block and print resistance. 收起 | |
Carboset® CA1009 | Lubrizol Advanced Materials, Inc. | Carboset® CA1009 is an APEO, NMP, NEP and formaldehyde-free acrylic polyurethane hybrid emulsion developed specifically for roof and building facade coatings. | |
Carboset® SA 850 | Lubrizol Advanced Materials, Inc. | Carboset® SA 850 is an acrylic copolymer emulsion specifically developed for elastomeric masonry coatings. High performance coatings can be formulated using Carboset SA-850 for a variety of construction materials including concrete, concrete block, brick,...展开 Carboset® SA 850 is an acrylic copolymer emulsion specifically developed for elastomeric masonry coatings. High performance coatings can be formulated using Carboset SA-850 for a variety of construction materials including concrete, concrete block, brick, stucco, EIFS and fiber-cement surfaces. 收起 | |
CEVA | Yantai Suny Chem International Co., Ltd. | CEVA is soluble in toluene and xylene. It has elasticity like rubber, good solubility and fluidity at room temperature. In addition, it has good weather resistance, chemical resistance, oil resistance, ozone resistance and flame resistance property. | |
CN104A75 | Sartomer Americas | 双酚A型环氧丙烯酸酯,很好的平衡了水溶性和高反应活性 | |
CN120Z | Sartomer Americas | CN120Z is a difunctional bisphenol A based epoxy acrylate. It provides a good balance of water properties and high reactivity. CN120Z offers the lowest viscosity of Sartomers bisphenol A based epoxy acrylates. Suggested applications include adhesives, ana...展开 CN120Z is a difunctional bisphenol A based epoxy acrylate. It provides a good balance of water properties and high reactivity. CN120Z offers the lowest viscosity of Sartomers bisphenol A based epoxy acrylates. Suggested applications include adhesives, anaerobic, binder, pressure sensitive and structural adhesives. It is also recommended for floor, metal, paper and plastic coatings, electronics, inks, flexo, gravure and offset inks. 收起 | |
CN293 | Sartomer Americas | 六官能度丙烯酸脂聚酯低聚物,具有良好的颜料润湿性和快速固化性。用于平板印刷和柔印油墨配方,以及抗磨损涂料。 | |
CN307 | Sartomer Americas | 聚丁二烯二丙烯酸低聚物,具有出色的柔韧性、耐水性和耐化学性。用于UV/EB固化涂料、粘胶、电子电气和光敏聚合物。 | |
CN9302 | Sartomer Americas | CN9302 is a urethane acrylate oligomer bearing both acrylate and isocyanate (NCO) functionality. It can be used in UV/EB curable, two-part urethane and dual cure formulations. In UV/EB formulations the reactive isocyanate allows for secondary moisture c...展开 CN9302 is a urethane acrylate oligomer bearing both acrylate and isocyanate (NCO) functionality. It can be used in UV/EB curable, two-part urethane and dual cure formulations. In UV/EB formulations the reactive isocyanate allows for secondary moisture cure of shadowed areas for enhanced coating performance. 收起 | |
CRAYVALLAC® EF 30P | Arkema Rheology & Specialty Additives | CRAYVALLAC® EF 30P is a low molecular weight styrene-maleic anhydride copolymer with an approximate 3:1 mole ratio. It is used as a matting agent in epoxy or epoxy/polyester powder coating formulations. Excellent results are obtained by combining CRAYVALL...展开 CRAYVALLAC® EF 30P is a low molecular weight styrene-maleic anhydride copolymer with an approximate 3:1 mole ratio. It is used as a matting agent in epoxy or epoxy/polyester powder coating formulations. Excellent results are obtained by combining CRAYVALLAC® EF 30P with REAFREE 6489-TS, Carboxylated Polyester resin. The very good colour stability of formulations containing CRAYVALLAC® EF 30P as matting additive, enables the production of low gloss white and pale colour paints. CRAYVALLAC® EF 30P has been developed specifically to provide matting effect in powder coatings. 收起 | Request Sample |
DAOTAN® TW 6474/37WA | Allnex | Daotan® TW 6474/37WA is an aqueous dispersion of an aliphatic polyurethane-acrylic hybrid. It is a hard grade polyurethane dispersion, particularly suitable as a combination partner for alkyd and acrylic emulsions, significantly improving the drying time ...展开 Daotan® TW 6474/37WA is an aqueous dispersion of an aliphatic polyurethane-acrylic hybrid. It is a hard grade polyurethane dispersion, particularly suitable as a combination partner for alkyd and acrylic emulsions, significantly improving the drying time and early hardness development. It can also be used for improving the flexibility of acrylic dispersion coatings. 收起 | Request Sample |
DEGACRYL® HS 4150 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4150 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyeth...展开 DEGACRYL® HS 4150 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4150 E will give good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. 收起 | Request Sample |
DEGACRYL® HS 4220 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4220 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyet...展开 DEGACRYL® HS 4220 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4220 E will achieve good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. 收起 | Request Sample |
DEGACRYL® HS 4221 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4221 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyre...展开 DEGACRYL® HS 4221 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. 收起 | Request Sample |
DEGACRYL® HS 4250 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4250 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyeth...展开 DEGACRYL® HS 4250 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4250 E will achieve good adhesion to aluminium in formulation with PVC-copolymer. Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® VP 4250 E has a higher solid content compared to the equivalent grade DEGACRYL® 4150 E. 收起 | Request Sample |
DEGACRYL® HS 4251 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4251 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. DEGACRYL® HS 4251 E is applied as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), poly...展开 DEGACRYL® HS 4251 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. DEGACRYL® HS 4251 E is applied as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® HS 4251 E has a higher solid content compared to the equivalent grade DEGACRYL® HS 4151 E. 收起 | Request Sample |
DEGACRYL® HS 4294 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4294 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. It is suitable as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polysty...展开 DEGACRYL® HS 4294 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. It is suitable as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET), polylactic acid (PLA) or vinyl (PVC). Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® HS 4294 E has a high solid content of 52%. 收起 | Request Sample |
DEGACRYL® HS 4322 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4322 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4322 E achieves direct adhesion on aluminium and PET. Due to its low haze properties when dry coated, it is ideally suited for tra...展开 DEGACRYL® HS 4322 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4322 E achieves direct adhesion on aluminium and PET. Due to its low haze properties when dry coated, it is ideally suited for transparent applications. General usage is as a binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polystyrene (PS), polyethylene terephthalate (PET), poly lactic acid (PLA) and polyvinyl chloride (PVC). 收起 | Request Sample |
DEGACRYL® HS 555 | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 555 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethyle...展开 DEGACRYL® HS 555 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 555 will give good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. 收起 | Request Sample |
DEGACRYL® HS 666 | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 666 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene ...展开 DEGACRYL® HS 666 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primered with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. 收起 | Request Sample |
Desmodur® HL BA | Covestro | Desmodur® HL BA is an aliphatic/aromatic polyisocyanate copolymer based on toluene diisocyanate (TDI) and and hexamethylene diisocyanate (HDI) and dissolved in n-butyl acetate. Used in the formulation of fast-drying two-component coatings. Drying times of...展开 Desmodur® HL BA is an aliphatic/aromatic polyisocyanate copolymer based on toluene diisocyanate (TDI) and and hexamethylene diisocyanate (HDI) and dissolved in n-butyl acetate. Used in the formulation of fast-drying two-component coatings. Drying times of coatings using Desmodur® HL BA are considerably shorter than those of coatings based on Desmodur® CB polyisocyanates and somewhat longer than those based on Desmodur® IL polyisocyanate. 收起 | |
Dispurez 101A | Incorez Ltd. | Dispurez 101A是一种硬质聚氨酯丙烯酸分散剂,专为需要出色的色彩相容性的应用设计。它非常适合用于具有良好耐用性的涂料。从Incorez Dispurez 101A衍生出来的膜具有出色的耐水和耐化学性。 这款产品可以迅速变硬,因此十分适合用于各种表面涂料行业的终端应用,特别是工业木器漆,卫生涂料和塑料涂料。 |