Desmodur® BL 1100/1 | Covestro | Desmodur® BL 1100/1 is a blocked aromatic polyisocyanate based on TDI, supplied as solvent-free. It is combined with cycloaliphatic diamines to formulate highly flexible, one-component stoving coatings, including those for application by dipping and curta...展开 Desmodur® BL 1100/1 is a blocked aromatic polyisocyanate based on TDI, supplied as solvent-free. It is combined with cycloaliphatic diamines to formulate highly flexible, one-component stoving coatings, including those for application by dipping and curtain coating and adhesive cements. 收起 | |
Desmodur® E 14 | Covestro | Desmodur® E 14 is a solvent-free, linear aromatic prepolymer based on toluene diisocyanate (TDI). It is recommended for the formulation of both coatings and sealants. Combinations with Desmodur E 22 polyisocyanate yield highly flexible water-resistant fin...展开 Desmodur® E 14 is a solvent-free, linear aromatic prepolymer based on toluene diisocyanate (TDI). It is recommended for the formulation of both coatings and sealants. Combinations with Desmodur E 22 polyisocyanate yield highly flexible water-resistant finishes and sprayable coatings. Desmodur E 14 can be used with amine crosslinkers to provide tough flexible films. 收起 | |
Desmodur® E 21 | Covestro | Desmodur® E 21 is an aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate (MDI). It is a solvent-free liquid of medium viscosity. It is suitable for use in the formulation of moisture-curing, one-component systems which, when thinned w...展开 Desmodur® E 21 is an aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate (MDI). It is a solvent-free liquid of medium viscosity. It is suitable for use in the formulation of moisture-curing, one-component systems which, when thinned with a suitable solvent, can be used as primers and sealers for porous substrates to provide protection against moisture, oil, fuel and other chemicals. It can also be used as a binder in the formulation of synthetic resin mortars. 收起 | |
Desmodur® IL 1451 | Covestro | Desmodur® IL 1451 is an aromatic polyisocyanate based on toluene diisocyanate (TDI) and dissolved in n-butyl acetate. Two-pack polyurethane coatings based on Desmodur® IL 1451 are characterized by their rapid initial drying and early sandability. This is ...展开 Desmodur® IL 1451 is an aromatic polyisocyanate based on toluene diisocyanate (TDI) and dissolved in n-butyl acetate. Two-pack polyurethane coatings based on Desmodur® IL 1451 are characterized by their rapid initial drying and early sandability. This is most important in industrial wood and furniture finishing. 收起 | |
Desmodur® IL BA | Covestro | Desmodur® IL BA is an aromatic polyisocyanate based on toluene diisocyanate (TDI) and dissolved in n-butyl acetate. Used in the formulation of fast drying two-component clear and pigmented polyurethane coatings for wood, metal, and paper substrates. Coati...展开 Desmodur® IL BA is an aromatic polyisocyanate based on toluene diisocyanate (TDI) and dissolved in n-butyl acetate. Used in the formulation of fast drying two-component clear and pigmented polyurethane coatings for wood, metal, and paper substrates. Coatings based on Desmodur® IL BA lend themselves to applications requiring high production rates and fast dry-to-handle times. Wood coatings formulated with Desmodur® IL BA show quick sanding properties. The applied finishes show little tendency to run from sharp edges. 收起 | |
Desmodur® IL EA | Covestro | Desmodur® IL EA is an aromatic polyisocyanate resin based on toluene diisocyanate (TDI). Form supplied is approximately 51 % in ethyl acetate. Can be used as a hardener component for fast-drying, two-component polyurethane coatings. It can also be used i...展开 Desmodur® IL EA is an aromatic polyisocyanate resin based on toluene diisocyanate (TDI). Form supplied is approximately 51 % in ethyl acetate. Can be used as a hardener component for fast-drying, two-component polyurethane coatings. It can also be used in combination with various Baycoll® products or other hydroxyl-bearing substances to formulate adhesives. Because of its fast drying, Desmodur IL EA is mainly used in coatings for on-line applications, like the packaging industry or in industrial furniture finishing. 收起 | |
Desmodur® L 67 BA | Covestro | Desmodur® L 67 BA is an aromtic polyisocyanate based on toluene diisocyanate. Form supplied is approximately 67% in butyl acetate. Can be used in combination with various Desmophen® grades or other hydroxyl-bearing substances to formulate air-drying two-c...展开 Desmodur® L 67 BA is an aromtic polyisocyanate based on toluene diisocyanate. Form supplied is approximately 67% in butyl acetate. Can be used in combination with various Desmophen® grades or other hydroxyl-bearing substances to formulate air-drying two-component polyurethane coatings. Systems crosslinked with Desmodur® L 67 BA can be used as coatings for furniture, parquet flooring, metal, paper, plastics and mineral substrates. 收起 | |
Desmodur® L 67 MPA/X | Covestro | Desmodur® L 67 MPA/X is an aromtic polyisocyanate based on toluene diisocyanate. Form supplied is approximately 67% in 1-methoxypropylacetate-2/xylene (1:1). Can be used in combination with various Desmophen® grades or other hydroxylbearing substances to ...展开 Desmodur® L 67 MPA/X is an aromtic polyisocyanate based on toluene diisocyanate. Form supplied is approximately 67% in 1-methoxypropylacetate-2/xylene (1:1). Can be used in combination with various Desmophen® grades or other hydroxylbearing substances to formulate air-drying twocomponent polyurethane coatings. Systems crosslinked with Desmodur® L 67 MPA/X can be used as coatings for furniture, parquet flooring, metal, paper, plastics and mineral substrates. 收起 | |
Desmodur® L 75 | Covestro | Desmodur® L 75 is an aromatic polyisocyanate based on toluene diisocyanate. Form supplied is approximately 75% in ethyl acetate. Can be used in combination with various Desmophen®, Baycoll®, Desmocoll® grades or other hydroxyl-bearing substances to formul...展开 Desmodur® L 75 is an aromatic polyisocyanate based on toluene diisocyanate. Form supplied is approximately 75% in ethyl acetate. Can be used in combination with various Desmophen®, Baycoll®, Desmocoll® grades or other hydroxyl-bearing substances to formulate air-drying two-component polyurethane coatings and adhesives. Systems crosslinked with Desmodur L 75 can be used as coatings for furniture, parquet flooring, metal, paper, plastics and mineral substrates. It is also suitable for room-temperature crosslinking of adhesives based on Desmocoll® or Baycoll®. These can be used to bond many materials,e.g. wood, metal and plastic. 收起 | |
Desmodur® N 3390A BA/SN | Covestro | Desmodur® N 3390A BA/SN is an aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in n-butyl acetate and aromatic 100 (1:1). It should be use to formulate both clear and pigmented two-component polyurethane coatings where exc...展开 Desmodur® N 3390A BA/SN is an aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in n-butyl acetate and aromatic 100 (1:1). It should be use to formulate both clear and pigmented two-component polyurethane coatings where excellent weather resistance, gloss and color retention are required. 收起 | |
Hartben AM 29 | Benasedo | Hartben AM 29 is an Aliphatic-aromatic polyisocyanurate, with a butyl acetate solvent, and 60% solids. It has a free monomer of < 0.5%, an NCO of 10.4-10.8%, a colour [G.H.] maximum of 3, and a viscosity [G.H.] of O-R. Hartben AM 29 is used in polyurethan...展开 Hartben AM 29 is an Aliphatic-aromatic polyisocyanurate, with a butyl acetate solvent, and 60% solids. It has a free monomer of < 0.5%, an NCO of 10.4-10.8%, a colour [G.H.] maximum of 3, and a viscosity [G.H.] of O-R. Hartben AM 29 is used in polyurethane coatings with good colour retention, gloss, toughness and hardness. It is recommended for metals and wood. 收起 | |
Hartben E 23 | Benasedo | Hartben E 23 is an Aromatic polyisocyanurate, with a butyl aacetate solvent, and a 50% solids content. This product has an NCO of 7.8-8.2%, a viscosity [G.H.] of H-J, a colour [G.H.] maximum of 2, and a free monomer of < 0.5%. Hartben E 23 is used in fast...展开 Hartben E 23 is an Aromatic polyisocyanurate, with a butyl aacetate solvent, and a 50% solids content. This product has an NCO of 7.8-8.2%, a viscosity [G.H.] of H-J, a colour [G.H.] maximum of 2, and a free monomer of < 0.5%. Hartben E 23 is used in fast-curing two-component sealers and finishes, by spray or curtain coating machine application, with good "pot-life" and lifting resistance. It has a wide compatibility with nitrocellulose. 收起 | |
Hartben SV 100 | Benasedo | Hartben SV 100 is used in very fast-curing sealers with easy hand or mechanical sandability or plasticizing by adding Hartben 75 P/ST. This product is an Aliphatic polyisocyanurate, and contains 100% solids. It has an NCO of 21.5-22.0%, a free monomer of ...展开 Hartben SV 100 is used in very fast-curing sealers with easy hand or mechanical sandability or plasticizing by adding Hartben 75 P/ST. This product is an Aliphatic polyisocyanurate, and contains 100% solids. It has an NCO of 21.5-22.0%, a free monomer of < 0.3%, a color [G.H.] maximum of 1, and a viscosity [G.H.] of Z-Z3. 收起 | |
ISONATE 125M | Univar Solutions | ISONATE 125M is a crystalline, pure MDI mixture composed of approximately 98% 4,4’-diphenylmethane diisocyanate and 2 percent 2,4’-diphenylmethane diisocyanate. Characterized by high purity, low acidity and reproducible reactivity, this difunctional produ...展开 ISONATE 125M is a crystalline, pure MDI mixture composed of approximately 98% 4,4’-diphenylmethane diisocyanate and 2 percent 2,4’-diphenylmethane diisocyanate. Characterized by high purity, low acidity and reproducible reactivity, this difunctional product is a key ingredient in preparing prepolymers for polyurethane processing. Judicious use of polyols, extenders and additives permits the manufacture of thermoplastic polymers suitable for extrusion, injection molding or solution applications. 收起 | Request Sample |
ISONATE 125MDR | Univar Solutions | ISONATE 125MDR is a crystalline, pure MDI mixture of approximately 98% 4,4`-diphenylmethane diisocyanate and 2% 2,4`-diphenylmethane diisocyanateis characterized by high purity, low acidity and reproducible reactivity. This difunctional product is a key i...展开 ISONATE 125MDR is a crystalline, pure MDI mixture of approximately 98% 4,4`-diphenylmethane diisocyanate and 2% 2,4`-diphenylmethane diisocyanateis characterized by high purity, low acidity and reproducible reactivity. This difunctional product is a key ingredient in preparing prepolymers for polyurethane processing. Judicious use of polyols, extenders and additives permits the manufacture of thermoplastic polymers suitable for extrusion, injection molding or solution applications. 收起 | Request Sample |
ISONATE 128 | Univar Solutions | ISONATE 128 is a stable, liquid two-functional isocyanate that offers energy and cost savings, as well as easier handling for the elastomer and industrial polyurethane markets. This product offers superior handling, and with optimal storage conditions bet...展开 ISONATE 128 is a stable, liquid two-functional isocyanate that offers energy and cost savings, as well as easier handling for the elastomer and industrial polyurethane markets. This product offers superior handling, and with optimal storage conditions between 80-95 °F (27-35 °C), it also provides stability in storage. . 收起 | Request Sample |
ISONATE 143-L | Univar Solutions | ISONATE 143-L is a polycarbodiimide-modified diphenylmethane diisocyanate. Liquid at room temperature, this product has a low viscosity and good storage stability down to 75°F. The polycarbodiimide adduct offers extra flexibility because adduct formation ...展开 ISONATE 143-L is a polycarbodiimide-modified diphenylmethane diisocyanate. Liquid at room temperature, this product has a low viscosity and good storage stability down to 75°F. The polycarbodiimide adduct offers extra flexibility because adduct formation is reversible (dissociation generates an additional isocyanate function). The carbodiimide linkage aids the stabilization of the polymer against hydrolytic degradation. 收起 | Request Sample |
ISONATE 181 | Univar Solutions | ISONATE 181 is a modified MDI compound produced by reacting high-purity diphenylmethane diisocyanate with sufficient glycol to allow easy handling down to 80°F (27°C). This medium-viscosity, supercooled liquid provides more rapid compatibility between iso...展开 ISONATE 181 is a modified MDI compound produced by reacting high-purity diphenylmethane diisocyanate with sufficient glycol to allow easy handling down to 80°F (27°C). This medium-viscosity, supercooled liquid provides more rapid compatibility between isocyanates and polyols, which increases the effectiveness of catalysts present and usually results in a more easily controlled polymer reaction. 收起 | Request Sample |
ISONATE 240 | Univar Solutions | ISONATE 240 is a modified MDI compound produced by reacting high-purity diphenylmethane diisocyanate with a high molecular weight polyester polyol, resulting in a material with good storage stability down to 72°F. This medium-viscosity product may be form...展开 ISONATE 240 is a modified MDI compound produced by reacting high-purity diphenylmethane diisocyanate with a high molecular weight polyester polyol, resulting in a material with good storage stability down to 72°F. This medium-viscosity product may be formulated with conventional polyether or polyester polyols and short chain diols or triols to yield high physical property elastomers or microcellular foams via the cast, low pressure or RIM-dispensing processes. 收起 | Request Sample |
KAPU IL-50 | Keeneyes International Co., Ltd. | KAPU IL-50is an aromatic polyisocyanate based on toluene diisocyanate and dissolved in butyl acetate. It is used in the formulation of fast drying two-component clear and pigmented polyurethane coatings for wood, metal, and paper substrates. | |
KAPU L-75 | Keeneyes International Co., Ltd. | KAPU L-75is an aromatic polyisocyanate based on toluene diisocyanate. Form supplied is approximately 75% in ethyl acetate. Systems crosslingked with KAPU L-75 can be used as coatings for furniture, parquet flooring, metal, paper, plastics and mineral subs...展开 KAPU L-75is an aromatic polyisocyanate based on toluene diisocyanate. Form supplied is approximately 75% in ethyl acetate. Systems crosslingked with KAPU L-75 can be used as coatings for furniture, parquet flooring, metal, paper, plastics and mineral substrates. These can be used to bond many materials, such as wood, metal and plastic. 收起 | |
Millionate® MT | Tosoh Corporation | Millionate® MT, in the form of a white or yellowish white solid, is an aromatic diisocyanate that is appropriate for the preparation of liner polymers by reaction with diamines and diols. It is also used for the production of elastomers, synthetic and art...展开 Millionate® MT, in the form of a white or yellowish white solid, is an aromatic diisocyanate that is appropriate for the preparation of liner polymers by reaction with diamines and diols. It is also used for the production of elastomers, synthetic and artificial leather, adhesives, and coatings. 收起 | |
Millionate® MT-F | Tosoh Corporation | Millionate® MT-F, in the form of a white or yellowish white flake, is an aromatic diisocyanate that is appropriate for the preparation of liner polymers by reaction with diamines and diols. It is also used for the production of elastomers, synthetic and a...展开 Millionate® MT-F, in the form of a white or yellowish white flake, is an aromatic diisocyanate that is appropriate for the preparation of liner polymers by reaction with diamines and diols. It is also used for the production of elastomers, synthetic and artificial leather, adhesives, and coatings. 收起 | |
PAPI 20 | Univar Solutions | PAPI 20 is a polymethylene polyphenylisocyanate that contains MDI. This product`s functionality value of 3.2 and high viscosity result in highly rigid foams. This product is designed for uses where high viscosity is required for processing polyisocyanurat...展开 PAPI 20 is a polymethylene polyphenylisocyanate that contains MDI. This product`s functionality value of 3.2 and high viscosity result in highly rigid foams. This product is designed for uses where high viscosity is required for processing polyisocyanurate foams. 收起 | Request Sample |
PAPI 23 | Univar Solutions | PAPI 23 is a light brown, low viscosity polymeric Methylene Diphenyl Diisocyanate (MDI) containing high quantities of Monomeric Methylene Diphenyl Diisocyanate (MMDI) isomers with an average functionality of 2.2-2.3. It may be used to produce viscoelastic...展开 PAPI 23 is a light brown, low viscosity polymeric Methylene Diphenyl Diisocyanate (MDI) containing high quantities of Monomeric Methylene Diphenyl Diisocyanate (MMDI) isomers with an average functionality of 2.2-2.3. It may be used to produce viscoelastic (VE) and high resiliency (HR) foams. 收起 | Request Sample |
PAPI 27 | Univar Solutions | PAPI 27 is a polymethylene polyphenylisocyanate that contains MDI. This product has a narrow molecular weight distribution and a high reactivity. Applicable to many foam processes, this product is compatible with rigid polyether and polyester polyols, mak...展开 PAPI 27 is a polymethylene polyphenylisocyanate that contains MDI. This product has a narrow molecular weight distribution and a high reactivity. Applicable to many foam processes, this product is compatible with rigid polyether and polyester polyols, making it suitable for a full range of low- to high-density semi-rigid foams, rigid foams and structural RIM processing. 收起 | Request Sample |
PAPI 580N | Univar Solutions | PAPI 580N is a polymethylene polyphenylisocyanate that contains MDI. This product has a high functionality and a relatively high viscosity. Recommended for use in polyisocyanurate rigid foams, this product imparts good resistance to heat distortion, excel...展开 PAPI 580N is a polymethylene polyphenylisocyanate that contains MDI. This product has a high functionality and a relatively high viscosity. Recommended for use in polyisocyanurate rigid foams, this product imparts good resistance to heat distortion, excellent strength properties at low densities and improved humid age stability. 收起 | Request Sample |
PAPI 94 | Univar Solutions | PAPI 94 is A polymethylene polyphenylisocyanate that contains MDI. This product’s low viscosity, low functionality, increased diphenylmethane diisocyanate content and increased percentage of orthopara isomers make PAPI 94 polymeric MDI highly versatile. ...展开 PAPI 94 is A polymethylene polyphenylisocyanate that contains MDI. This product’s low viscosity, low functionality, increased diphenylmethane diisocyanate content and increased percentage of orthopara isomers make PAPI 94 polymeric MDI highly versatile. This product also offers delayed gel times, which results in better flow into molds for semiflexible and integral skin foams. 收起 | Request Sample |
PAPI 95 | Univar Solutions | PAPI 95 is a polymethylene polyphenylisocyanate that contains MDI. This product’s viscosity and functionality have been optimized by maintaining a high diphenylmethane diisocyanate content and a high percentage of ortho-para isomers to provide excellent f...展开 PAPI 95 is a polymethylene polyphenylisocyanate that contains MDI. This product’s viscosity and functionality have been optimized by maintaining a high diphenylmethane diisocyanate content and a high percentage of ortho-para isomers to provide excellent flowability and fast curing in a variety of polyurethane applications. This unique combination makes this product suitable for a full range of low and high density semi-flexible and semi-rigid foam applications that demand fast demold times for intricate parts. 收起 | Request Sample |
Polurene OK K | S.A.P.I.C.I. SpA | Polurene OK K is an aliphatic-aromatic isocyanurate. This product dries quickly. If used in combination with saturated polyesters, it can be used in the formulation of overprinting coatings and for inks with good non-yellowing properties. | |
Polurene OK-HP | S.A.P.I.C.I. SpA | Polurene OK-HP is an aliphatic-aromatic isocyanurate. This product is compatible with aromatic solvents, nitrocellulose, CAB, and hydroxide acrylic resins. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with...展开 Polurene OK-HP is an aliphatic-aromatic isocyanurate. This product is compatible with aromatic solvents, nitrocellulose, CAB, and hydroxide acrylic resins. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics, and other substrates. This product contains less than .5% TDI or HDI isocyanates. 收起 | |
Polurene OK.D | S.A.P.I.C.I. SpA | Polurene OK.D is an aliphatic-aromatic isocyanurate. This product is compatible with nitrocellulose. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics, and other s...展开 Polurene OK.D is an aliphatic-aromatic isocyanurate. This product is compatible with nitrocellulose. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics, and other substrates. This product contains less than .5% TDI or HDI isocyanates. 收起 | |
Polurene OK.D AE | S.A.P.I.C.I. SpA | Polurene OK.D AE is an aliphatic-aromatic isocyanurate. This product is compatible with nitrocellulose. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics and other...展开 Polurene OK.D AE is an aliphatic-aromatic isocyanurate. This product is compatible with nitrocellulose. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics and other substrates. Finally, it can be used in polyurethane adhesives and inks. This product contains less than .5% TDI or HDI isocyanates. 收起 | |
Polurene OK.D.S | S.A.P.I.C.I. SpA | Polurene OK.D.S is an aliphatic-aromatic isocyanurate. This product is compatible with nitrocellulose and hydroxide acrylic resins. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention f...展开 Polurene OK.D.S is an aliphatic-aromatic isocyanurate. This product is compatible with nitrocellulose and hydroxide acrylic resins. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics, and other substrates. This product contains less than .5% TDI or HDI isocyanates. 收起 | |
Polurgreen ES.P | S.A.P.I.C.I. SpA | Polurgreen ES.P is a mixed isocyanurate. This product has good yellowing resistance and good hardness. It can be used in clear or pigmented polyurethane high gloss topcoats with high solids content. Its high nitrocellulose facilitates good cross-linkin...展开 Polurgreen ES.P is a mixed isocyanurate. This product has good yellowing resistance and good hardness. It can be used in clear or pigmented polyurethane high gloss topcoats with high solids content. Its high nitrocellulose facilitates good cross-linking with higher hydroxide-content resins. This product contains less than .5% TDI isocyanates and less than .1% HDI isocyanates. 收起 | |
Polyisocyanate Sunicure 75 | Yantai Suny Chem International Co., Ltd. | Polyisocyanate Sunicure 75是以甲苯二异氰酸酯为基础的芳香聚异氰酸酯。以75%的乙酸乙酯形式供应。Sunicure 75可以增加粘合剂对热度,油,增塑剂和很多其它溶剂的耐性。它同时对很多材料,特别是塑料材料有良好的粘性。这款产品应用在用于家具、镶木地板、金属、纸张、塑料和矿物基材的涂料中。它还可以用于粘合很多其它材料,如木材,金属和塑料。Sunicure 75固有的灰白色使其可以应用在用于包装的透明塑料薄膜中。 | |
Uronal B 55/50 ABT | Galstaff Multiresine S.p.A. | Uronal B 55/50 ABT is a low viscosity aromatic isocyanurate suitable for PU wood coatings with long pot-life, flexibility, reactivity and hardness. It can be used alone or with Ftalon resins or mixed with other Uronal products. Uronal B 55/50 ABT is also ...展开 Uronal B 55/50 ABT is a low viscosity aromatic isocyanurate suitable for PU wood coatings with long pot-life, flexibility, reactivity and hardness. It can be used alone or with Ftalon resins or mixed with other Uronal products. Uronal B 55/50 ABT is also suitable for matt finishes with excellent flowing and good matting agents compatibility. 收起 | |
Uronal RA 55/50 ABT | Galstaff Multiresine S.p.A. | Uronal RA 55/50 ABT is an aromatic isocianurate for PU coatings with high reactivity and more flexible than Uronal RA 50/50 ABT. It is suitable for fast drying PU coatings for wood in combination with the polyols (Ftalon). | |
VORANATE T-80 TYPE I | Univar Solutions | VORANATE T-80 TYPE I is Pure Toluene diisocyanate with 80% 2,4-TDI with 20% 2,6-TDI with low acidity. Used in elastomers, flexible foams and carpet underlayment. | Request Sample |
VORANATE T-80 TYPE II | Univar Solutions | VORANATE T-80 TYPE II is Pure Toluene diisocyanate with 80% 2,4-TDI with 20% 2,6-TDI with high acidity. Used in elastomers, flexible foams and carpet underlayment. | Request Sample |