UL Prospector

成功!

成功保存搜索结果
5075-BS-85 Water Reducible Saturated Polyester Resin Gabriel Performance Products 5075-BS-85 Water Reducible Saturated Polyester Resin is a fast curing water reducible polyester resin intended for industrial and OEM finishes.
AROPLAZ® 6126-Z-65 Polynt Composites AROPLAZ® 6126-Z-65 is a linear saturated polyester resin. This product offers flexibility with a minimal post-cure, good QUV gloss retention and Xenon weatherometer gloss retention, and it retains its color and gloss on high-temperature bakes. It can be u...展开 AROPLAZ® 6126-Z-65 is a linear saturated polyester resin. This product offers flexibility with a minimal post-cure, good QUV gloss retention and Xenon weatherometer gloss retention, and it retains its color and gloss on high-temperature bakes. It can be used in melamine-crosslinked baking enamels for coil coating applications that need high flexibility. 收起
AROPLAZ® 6749-XA6-90 Polynt Composites AROPLAZ® 6749-XA6-90 is a high-solids, saturated polyester resin. This product develops hard films with good flexibility when crosslinked with aminoplast resins. It can be used in coatings for small appliance enamels, and in metal coatings for furniture a...展开 AROPLAZ® 6749-XA6-90 is a high-solids, saturated polyester resin. This product develops hard films with good flexibility when crosslinked with aminoplast resins. It can be used in coatings for small appliance enamels, and in metal coatings for furniture and equipment. 收起
BEPD 70L Perstorp BEPD 70L has two primary hydroxyl groups and is a mixture of 70% BEPD, 25% NEO, and 5% water. It is a clear and colorless liquid at room temperature. BEPD 70L can be used in saturated polyesters for can and coil coatings, high-solid coatings, and powder c...展开 BEPD 70L has two primary hydroxyl groups and is a mixture of 70% BEPD, 25% NEO, and 5% water. It is a clear and colorless liquid at room temperature. BEPD 70L can be used in saturated polyesters for can and coil coatings, high-solid coatings, and powder coatings. 收起
Benester 2580 Benasedo Benester 2580 is used in high-yield coil-coating enamels with very good characteristics and adhesion on metals without primer. This product is a high aliphatic content with a blend of solvents. It contains 70% solids, a viscosity [G.H.] of Y-Z, an A.V. so...展开 Benester 2580 is used in high-yield coil-coating enamels with very good characteristics and adhesion on metals without primer. This product is a high aliphatic content with a blend of solvents. It contains 70% solids, a viscosity [G.H.] of Y-Z, an A.V. solids amount of 5-10, a colour [G.H.] maximum of 2, and an OH solids content of 0.9-1,1%. 收起
Benester 602 Benasedo Benester 602 is used in low-cost bake sealers and topcoats that are specially designed for coil-coatings with higher solid contents. It is linear, an H.B. Naphta/M.P.A. solvent, and has a 65% solids content. This product has a viscosity [G.H.] of U-V, an ...展开 Benester 602 is used in low-cost bake sealers and topcoats that are specially designed for coil-coatings with higher solid contents. It is linear, an H.B. Naphta/M.P.A. solvent, and has a 65% solids content. This product has a viscosity [G.H.] of U-V, an A.V. solids amount of 5-10, an OH solids amount of 1.3-1.5, and a color [G.H.] maximum of 3. 收起
Benester L 83 Benasedo Benester L 83 is used in coil-coating enamels for interior/exterior that are endowed with high flexibility, gloss, and colour retention. This product is slightly branched, an H.B. Naphta/ Butylglycol/ M.P.A., and a 60% solids content. It has a viscosity [...展开 Benester L 83 is used in coil-coating enamels for interior/exterior that are endowed with high flexibility, gloss, and colour retention. This product is slightly branched, an H.B. Naphta/ Butylglycol/ M.P.A., and a 60% solids content. It has a viscosity [G.H.] of Z-Z1, an A.V. solids amount of 2-6, and a color [G.H.] maximum of 3, and an OH solids amount of 1.0-1.2. 收起
Benester PZ 300 Benasedo Benester PZ 300 is an aliphatic linear, with 100% solids and 8-18 A.V. solids content. This product has a viscosity [G.H.] of V-X, a color [G.H.] maximum of 5, and an OH solids of 2.0-2.2%. Benester PZ 300 is used in plasticizer polymers for two-component...展开 Benester PZ 300 is an aliphatic linear, with 100% solids and 8-18 A.V. solids content. This product has a viscosity [G.H.] of V-X, a color [G.H.] maximum of 5, and an OH solids of 2.0-2.2%. Benester PZ 300 is used in plasticizer polymers for two-component polyurethane systems for metals, flexibilizing vehicles for can and coil-coating systems, and tinting pastes for plastics. 收起
Request Sample DYNAPOL® L 206 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 205 is a saturated, high molecular, linear co-polyester. It is recommended for use in can coatings for foil primers and printing inks, and may also be use in heat sealing lacquers. In coil coatings, this product may be suitable for appliance fi...展开 DYNAPOL® L 205 is a saturated, high molecular, linear co-polyester. It is recommended for use in can coatings for foil primers and printing inks, and may also be use in heat sealing lacquers. In coil coatings, this product may be suitable for appliance finishing. 收起
Request Sample DYNAPOL® L 210 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 210 is a saturated, high molecular, linear co-polyester. It is recommended for use in coil coatings for hot laminating adhesives. In can coatings, it is recommended for foil primers and printing inks, and may also be used for heat sealing lacqu...展开 DYNAPOL® L 210 is a saturated, high molecular, linear co-polyester. It is recommended for use in coil coatings for hot laminating adhesives. In can coatings, it is recommended for foil primers and printing inks, and may also be used for heat sealing lacquers. 收起
Request Sample DYNAPOL® L 323 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 323 is a saturated, high molecular, linear co-polyester. It is recommended for use in can coating applications such as adhesion promoters. This product may also be suitable for metal decorating enamels, foil primers, printing inks, and heat sea...展开 DYNAPOL® L 323 is a saturated, high molecular, linear co-polyester. It is recommended for use in can coating applications such as adhesion promoters. This product may also be suitable for metal decorating enamels, foil primers, printing inks, and heat sealing lacquers. 收起
Request Sample DYNAPOL® L 651 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 651 is a saturated, high molecular, linear co-polyester. It is recommended for use in can coatings, especially for interior can coatings and adhesion promoters. It may also be used for metal decorating enamels and heat sealing lacquers.
Request Sample DYNAPOL® L 850 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 850 is a saturated, high molecular, linear co-polyester. It is recommended for use in coil coating applications such as elastification resins. This product is also recommended for tube-and aerosol can coatings, and may be suitable for metal dec...展开 DYNAPOL® L 850 is a saturated, high molecular, linear co-polyester. It is recommended for use in coil coating applications such as elastification resins. This product is also recommended for tube-and aerosol can coatings, and may be suitable for metal decorating enamels. 收起
Request Sample DYNAPOL® L 907 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 907 is a saturated, high molecular, linear co-polyester. It is recommended for use in interior can coating applications. This product may also be used for metal decorating enamels.
Request Sample DYNAPOL® L 912 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 912 is a saturated, high molecular, linear co-polyester. It is recommended for use in interior can coatings, and may also be used for metal decorating enamels.
Request Sample DYNAPOL® L 914 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 914 is a saturated, high molecular, linear co-polyester. It is recommended for use in interior can coating applications. This product may also be used for metal decorating enamels.
Request Sample DYNAPOL® L 952 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 952 is a saturated, high molecular, linear co-polyester. In coil coatings, it is recommended for appliance finishing applications, and may also be used for primers for hot dip galvanized steel. This product is also recommended for interior can ...展开 DYNAPOL® L 952 is a saturated, high molecular, linear co-polyester. In coil coatings, it is recommended for appliance finishing applications, and may also be used for primers for hot dip galvanized steel. This product is also recommended for interior can coatings and may be suitable for metal decorating enamels. 收起
Request Sample DYNAPOL® LH 318-02 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 318-02 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coatings such as interior can coatings. This product may also be suitable for primers for metal decorating enamels.
Request Sample DYNAPOL® LH 538-02 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 538-02 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially exterior architecture, appliance finishing, and traffic applications.
Request Sample DYNAPOL® LH 724-24 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 724-24 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially exterior and interior architecture. This product may also be suitable for appliance finishing and t...展开 DYNAPOL® LH 724-24 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially exterior and interior architecture. This product may also be suitable for appliance finishing and traffic uses. 收起
Request Sample DYNAPOL® LH 727-02 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 727-02 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially for back coatings.
Request Sample DYNAPOL® LH 744-23 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 744-23 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially for exterior architecture.
Request Sample DYNAPOL® LH 773-01 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 773-01 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for can coating applications, especially metal decorating enamels and tube- and aerosol can coatings.
Request Sample DYNAPOL® LH 775-52 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 775-52 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for can coating applications, especially metal decorating enamels. It may also be used for tube and aerosol can coatings.
Request Sample DYNAPOL® LH 815-05 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 815-05 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coatings such as metal decorating enamels, interior can coatings, and tube and aerosol can coatings. This product may also be suitable ...展开 DYNAPOL® LH 815-05 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coatings such as metal decorating enamels, interior can coatings, and tube and aerosol can coatings. This product may also be suitable for coil coating applications such as primers for hot dip galvanized steel and primers for aluminium. 收起
Request Sample DYNAPOL® LH 818-05 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 818-05 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coatings such as metal decorating enamels. This product is also recommended for many coil coating applications, including interior arch...展开 DYNAPOL® LH 818-05 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coatings such as metal decorating enamels. This product is also recommended for many coil coating applications, including interior architecture, appliance finishing, and aluminium primers. It may also be suitable for primers for hot dip galvanized steel. 收起
Request Sample DYNAPOL® LH 820-16 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 820-16 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as primers for hot dip galvanized steel. This product may also be suitable for appliance finishing applications.
Request Sample DYNAPOL® LH 822-01 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 822-01 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coating applications such as interior architecture and for traffic uses. This product may also be suitable for appliance finishing app...展开 DYNAPOL® LH 822-01 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coating applications such as interior architecture and for traffic uses. This product may also be suitable for appliance finishing applications. 收起
Request Sample DYNAPOL® LH 823-01 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 823-01 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for can coating applications, especially for tube and aerosol can coatings. This product may also be suitable for metal decorating enamels.
Request Sample DYNAPOL® LH 824-16 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 824-16 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as primers for hot dip galvanized steel. This product may also be suitable for appliance finishing applications.
Request Sample DYNAPOL® LH 826-05/A Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 826-05/A is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coatings such as metal decorating enamels, and coil coatings such as interior architecture. This product may be suitable for other co...展开 DYNAPOL® LH 826-05/A is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coatings such as metal decorating enamels, and coil coatings such as interior architecture. This product may be suitable for other coil coating applications, such as appliance finishing, primers for hot dip galvanized steel, and primers for aluminium. 收起
Request Sample DYNAPOL® LH 828-24 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 828-24 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as interior architecture and back coatings. This product may also be suitable for exterior architecture and traffic uses...展开 DYNAPOL® LH 828-24 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as interior architecture and back coatings. This product may also be suitable for exterior architecture and traffic uses. 收起
Request Sample DYNAPOL® LH 830-02 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 830-02 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for can coating applications, especially metal decorating enamels and tube- and aerosol can coatings. This product is also recommended for co...展开 DYNAPOL® LH 830-02 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for can coating applications, especially metal decorating enamels and tube- and aerosol can coatings. This product is also recommended for coil coating applications such as exterior and interior architecture, appliance finishing, and traffic uses. 收起
Request Sample DYNAPOL® LH 831-24 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 831-24 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coating applications such as interior and exterior architecture, and also for traffic uses and primers for aluminium. This product may...展开 DYNAPOL® LH 831-24 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coating applications such as interior and exterior architecture, and also for traffic uses and primers for aluminium. This product may also be suitable for can coating applications such as metal decorating enamels. 收起
Request Sample DYNAPOL® LH 832-02 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 832-02 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially exterior and interior architecture, appliance finishing, and traffic uses.
Request Sample DYNAPOL® LH 833-03 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 833-03 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially primers for hot dip galvanized steel and primers for aluminium. It may also be suitable for applian...展开 DYNAPOL® LH 833-03 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially primers for hot dip galvanized steel and primers for aluminium. It may also be suitable for appliance finishing and for metal decorating enamels. 收起
Request Sample DYNAPOL® LH 834-02 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 834-02 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as interior and exterior architecture. This product may also be suitable for appliance finishing applications.
Request Sample DYNAPOL® LH 838-02 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 838-02 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as interior and exterior architecture. This product may also be suitable for traffic uses and for can coating applicatio...展开 DYNAPOL® LH 838-02 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as interior and exterior architecture. This product may also be suitable for traffic uses and for can coating applications like metal decorating enamels. 收起
Request Sample DYNAPOL® LH 874-26 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 874-26 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as interior architecture. This product may also be suitable for appliance finishing and for back coatings.
Request Sample DYNAPOL® LH 898-14 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 898-14 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as interior and exterior architecture. This product may also be suitable for traffic uses.
Request Sample DYNAPOL® LS 4131-10 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LS 4131-10 is a saturated, medium molecular, linear, highly elastified, hydroxylated co-polyester resin. It is recommended for coil coatings for traffic uses and for can coatings such as foil primers and printing inks. Other can coating applicati...展开 DYNAPOL® LS 4131-10 is a saturated, medium molecular, linear, highly elastified, hydroxylated co-polyester resin. It is recommended for coil coatings for traffic uses and for can coatings such as foil primers and printing inks. Other can coating applications for this product may include adhesion promoters and heat sealing lacquers. 收起
Request Sample DYNAPOL® LS 415-10 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LS 415-10 is a saturated, medium molecular, linear, highly elastified, co-polyester resin. It is recommended for can coating applications such as interior can coatings, foil primers, and printing inks. This product may also be suitable for coil c...展开 DYNAPOL® LS 415-10 is a saturated, medium molecular, linear, highly elastified, co-polyester resin. It is recommended for can coating applications such as interior can coatings, foil primers, and printing inks. This product may also be suitable for coil coating applications like interior architecture and appliance finishing. 收起
Request Sample DYNAPOL® LS 436-12 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LS 436-12 is a saturated, medium molecular, linear, highly elastified, hydroxylated co-polyester resin. It is recommended for coil coating applications such as interior and exterior architecture. This product may also be suitable for can coatings...展开 DYNAPOL® LS 436-12 is a saturated, medium molecular, linear, highly elastified, hydroxylated co-polyester resin. It is recommended for coil coating applications such as interior and exterior architecture. This product may also be suitable for can coatings, including heat sealing lacquers. 收起
Request Sample DYNAPOL® LS 615 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LS 615 is a saturated, medium molecular, linear, highly elastified, hydroxylated co-polyester resin. It is recommended for can coating applications, especially for foil primers, printing inks, and heat sealing lacquers.
Request Sample DYNAPOL® P 1500 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® P 1500 is a saturated, high molecular, semi-crystallin, linear co-polyester resin. It is recommended for thermoplastic applications.
Request Sample DYNAPOL® S 1510 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® S 1510 is a saturated, high molecular, semi-crystallin, linear co-polyester resin. It is recommended for thermoplastic applications.
Request Sample DYNAPOL® Terra 125 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® Terra 125 is a saturated, medium molecular, linear, highly elastified, hydroxylated co-polyester resin. It is recommended for can coating applications such as lacquers for aluminium foils and interior can coatings. It is also recommended for coil...展开 DYNAPOL® Terra 125 is a saturated, medium molecular, linear, highly elastified, hydroxylated co-polyester resin. It is recommended for can coating applications such as lacquers for aluminium foils and interior can coatings. It is also recommended for coil coatings such as exterior and interior architecture, and may also be suitable for appliance finishing applications. 收起
Request Sample DYNAPOL® Terra 127-03 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® Terra 125 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coating applications such as lacquers for aluminium foils and interior can coatings. It is also recommended for coil coatings such as e...展开 DYNAPOL® Terra 125 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coating applications such as lacquers for aluminium foils and interior can coatings. It is also recommended for coil coatings such as exterior and interior architecture, and may also be suitable for primers for hot dip galvanized steel and primers for aluminium. 收起
Desmophen® 631 MPA Covestro Desmophen® 631 MPA is a saturated polyester resin.
Desmophen® 650A 65 PMA Covestro Desmophen® 650A 65 PMA is a saturated polyester resin that is used as a coreactant for Desmodur N polyisocyanates two-component polyurethane coatings.
Droplas™ 4010 D.R. Coats Ink & Resins Pvt. Ltd. Droplas™ 4010 is a Oil free saturated polyester resins 65% in solvent C-nine/butyl glycol (70 SNABG).
Ftalon 27/70 ABT Galstaff Multiresine S.p.A. Ftalon 27/70 ABT is a saturated polyester that acquires the following properties if combined with proper isocyanates: fast dust-free, excellent solvent flash-off, fast drying-time, yellowing resistance, excellent mechanical resistance and surface film har...展开 Ftalon 27/70 ABT is a saturated polyester that acquires the following properties if combined with proper isocyanates: fast dust-free, excellent solvent flash-off, fast drying-time, yellowing resistance, excellent mechanical resistance and surface film hardness (panels can be stacked after 24hrs). 收起
Ftalon 34/60X Galstaff Multiresine S.p.A. Ftalon 34/60X provides good film curing, even with reduced quantity of isocyanates. The cured film is hard, but should be plasitized with Ftalon 42 or 43. Ftalon 34/60X is suitable for nitro varnishes for wood.
Ftalon 45/75 AET 2K-PU saturated polyester Galstaff Multiresine S.p.A. Ftalon 45/75 AET 2K-PU is a saturated polyester with fast solvent release for 2K-PU coatings. Ftalon 45's low viscosity allows to formulate high solid coatings with good hardening.
Ftalon TAC Galstaff Multiresine S.p.A. Ftalon TAC is a high quality polyester that combines the main charcteristics of hydroxylated acrylic resins and hydroxilated polyester resins, for the preparation of 2K-PU coatings. Ftalon TAC is suitable for car refinishing, industry and wood. This prod...展开 Ftalon TAC is a high quality polyester that combines the main charcteristics of hydroxylated acrylic resins and hydroxilated polyester resins, for the preparation of 2K-PU coatings. Ftalon TAC is suitable for car refinishing, industry and wood. This product has good resistance to yellowing and the outdoors, gloss retention and extremely low color. 收起
Ftalon TN/100 Galstaff Multiresine S.p.A. Ftalon TN/100 is a polyol with good flexibility and it's OH groups react at room temperature and at 45°-50°C. This resin offers high cross-linking speed with isocyanates, but it is particularly suitable for cross-linking with aliphatic isocyanates. Do to ...展开 Ftalon TN/100 is a polyol with good flexibility and it's OH groups react at room temperature and at 45°-50°C. This resin offers high cross-linking speed with isocyanates, but it is particularly suitable for cross-linking with aliphatic isocyanates. Do to it's excellent resistance, Ftalon TN/100 is suitable for marine applications. 收起
Request Sample GENOMER* 6050/GP Rahn USA Corp. GENOMER 1343 (GPTA)中的改性聚酯树脂。用于自由基固化油墨、涂料和粘胶。
Italester 218 SND Galstaff Multiresine S.p.A. Italester 218 SND is a saturated polyester suitable for sealers or OPV for can coatings in combination with benzoguanamine or melamine resins (Itamin M and BG). It is also suitable for coatings for coils (appliances, metallic structures or primer for alum...展开 Italester 218 SND is a saturated polyester suitable for sealers or OPV for can coatings in combination with benzoguanamine or melamine resins (Itamin M and BG). It is also suitable for coatings for coils (appliances, metallic structures or primer for aluminum). Italester 218 SND provides excellent chemical resistance and flexibility in combination with HMMM resins (Itamin HM). 收起
Italester MX 353 Galstaff Multiresine S.p.A. Italester MX 353 is a saturated polyester for "soft touch" 2K-PU coatings for plastics (ABS, PVC, PS, PMMA, PET, etc.), metal and wood with primer. The main characteristics of Italester MX 353 include high thickness film, high flexibility and good chemica...展开 Italester MX 353 is a saturated polyester for "soft touch" 2K-PU coatings for plastics (ABS, PVC, PS, PMMA, PET, etc.), metal and wood with primer. The main characteristics of Italester MX 353 include high thickness film, high flexibility and good chemical resistances. 收起
Request Sample LA-9158 US Polymers - Accurez LLC LA-9158 is a saturated polyester for higher solids coatings at 75% in PM Acetate. These coatings possess gloss retention, light stability and good chemical and abrasion resistance. Finished coatings based on LA-9158 also possess outstanding hardness devel...展开 LA-9158 is a saturated polyester for higher solids coatings at 75% in PM Acetate. These coatings possess gloss retention, light stability and good chemical and abrasion resistance. Finished coatings based on LA-9158 also possess outstanding hardness development. 收起
Request Sample LA-9282 US Polymers - Accurez LLC LA-9282 is a saturated hydroxy functional polyester prepared at high solids for more flexibility. This resin is designed to crosslink at room temperature with polyisocyanates to produce high performance coatings. When combined with aliphatic isocyanates t...展开 LA-9282 is a saturated hydroxy functional polyester prepared at high solids for more flexibility. This resin is designed to crosslink at room temperature with polyisocyanates to produce high performance coatings. When combined with aliphatic isocyanates the resulting resin displays high gloss, improved weathering and color retention, outstanding durability/flexibility as well as increased chemical resistance. Next generation HPP-6007 to improve UV resistance. 收起
Request Sample LA-9295 US Polymers - Accurez LLC LA-9295 is a saturated polyester polyol for two component polyurethane coatings in Methyl Acetate. These coatings possess gloss retention, light stability and good chemical and abrasion resistance. Finished coatings based on LA-9295 also possess outstandi...展开 LA-9295 is a saturated polyester polyol for two component polyurethane coatings in Methyl Acetate. These coatings possess gloss retention, light stability and good chemical and abrasion resistance. Finished coatings based on LA-9295 also possess outstanding hardness development. 收起
Request Sample LA-9373 US Polymers - Accurez LLC LA-9373 is a saturated polyester polyol for two component polyurethane coatings supplied in a combination of PCBTF and Methyl Acetate. These coatings possess gloss retention, light stability and good chemical and abrasion resistance. Finished coatings bas...展开 LA-9373 is a saturated polyester polyol for two component polyurethane coatings supplied in a combination of PCBTF and Methyl Acetate. These coatings possess gloss retention, light stability and good chemical and abrasion resistance. Finished coatings based on LA-9373 also possess outstanding hardness development. 收起
Nichigo-Polyester HR-0038 Nippon Gohsei Nichigo-Polyester HR-0038 is a high molecular weight saturated polyester resin that features a high refractive index and good heat and humidity resistance. This product is well suited for use in a wide variety of applications, including coatings and prime...展开 Nichigo-Polyester HR-0038 is a high molecular weight saturated polyester resin that features a high refractive index and good heat and humidity resistance. This product is well suited for use in a wide variety of applications, including coatings and primers, film and label adhesives, and printing paper applications. 收起
Nichigo-Polyester LP011 Nippon Gohsei Nichigo-Polyester LP011 is a high molecular weight saturated polyester resin that features good solution stability. This product is well suited for use in a wide variety of applications, including laminates and adhesives, inks, can and coil coatings, and ...展开 Nichigo-Polyester LP011 is a high molecular weight saturated polyester resin that features good solution stability. This product is well suited for use in a wide variety of applications, including laminates and adhesives, inks, can and coil coatings, and magnetic paints. 收起
Nichigo-Polyester LP033 Nippon Gohsei Nichigo-Polyester LP033 is a high molecular weight saturated polyester resin featuring good metal adhesion. This product is well suited for use in coatings, primers, laminates, and polyester adhesives.
Nichigo-Polyester LP035 Nippon Gohsei Nichigo-Polyester LP035 is a high molecular weight saturated polyester resin featuring good weather and chemical resistance. This product is well suited for use in electronic and plastic coatings, laminates, polyester adhesives, and PVC backing applicatio...展开 Nichigo-Polyester LP035 is a high molecular weight saturated polyester resin featuring good weather and chemical resistance. This product is well suited for use in electronic and plastic coatings, laminates, polyester adhesives, and PVC backing applications. 收起
Nichigo-Polyester TP217 Nippon Gohsei Nichigo-Polyester TP217 is a high molecular weight saturated polyester resin featuring good workability. This product is well suited for use in general and electronic coating applications.
Nichigo-Polyester TP219 Nippon Gohsei Nichigo-Polyester TP219 is a low molecular weight saturated polyester resin that is well suited for use in optical adhesives and general and electronic coating applications.
Nichigo-Polyester TP220 Nippon Gohsei Nichigo-Polyester TP220 is a high molecular weight saturated polyester resin with a high glass transition temperature (Tg). This product is well suited for use in general and electronic coatings, adhesive films and labels, primers, optical and polyester a...展开 Nichigo-Polyester TP220 is a high molecular weight saturated polyester resin with a high glass transition temperature (Tg). This product is well suited for use in general and electronic coatings, adhesive films and labels, primers, optical and polyester adhesives, and PVC backing materials. 收起
Nichigo-Polyester TP235 Nippon Gohsei Nichigo-Polyester TP235 is a high molecular weight saturated polyester resin. It is formulated to have good adhesion with ultraviolet (UV) inks. This product is well suited for use in coatings and primers for plastics and electronics, film and label adhes...展开 Nichigo-Polyester TP235 is a high molecular weight saturated polyester resin. It is formulated to have good adhesion with ultraviolet (UV) inks. This product is well suited for use in coatings and primers for plastics and electronics, film and label adhesives, polyester adhesives, and PVC backing materials. 收起
Nichigo-Polyester TP236 Nippon Gohsei Nichigo-Polyester TP236 is a high molecular weight saturated polyester resin featuring good pigment dispersion. This product is well suited for use in plastic and electronic coatings and primers, adhesive films and labels, polyester adhesives, and PVC bac...展开 Nichigo-Polyester TP236 is a high molecular weight saturated polyester resin featuring good pigment dispersion. This product is well suited for use in plastic and electronic coatings and primers, adhesive films and labels, polyester adhesives, and PVC backing materials. 收起
Nichigo-Polyester TP249 Nippon Gohsei Nichigo-Polyester TP249 is a high molecular weight saturated polyester resin featuring good dispersibility of magnetic elements. This product is well suited for use in plastic and electronic coatings and optical adhesives.
Nichigo-Polyester TP290 Nippon Gohsei Nichigo-Polyester TP290 is a high molecular weight saturated polyester resin featuring good staining properties. This product is well suited for use in general and electronic coating applications.
Nichigo-Polyester W-0030 Nippon Gohsei Nichigo-Polyester W-0030 is a high molecular weight saturated polyester resin featuring a high acid value, good adhesion, and good heat and humidity resistance. This product is well suited for use in adhesive films and labels, plastic and electronic coati...展开 Nichigo-Polyester W-0030 is a high molecular weight saturated polyester resin featuring a high acid value, good adhesion, and good heat and humidity resistance. This product is well suited for use in adhesive films and labels, plastic and electronic coatings and primers, and optical adhesives. 收起
Nichigo-Polyester WR-901 Nippon Gohsei Nichigo-Polyester WR-901 is a high molecular weight saturated polyester resin featuring good heat and humidity resistance, as well as good ultraviolet (UV) ink printability. This product is well suited for use in optical adhesives, plastic and electronic ...展开 Nichigo-Polyester WR-901 is a high molecular weight saturated polyester resin featuring good heat and humidity resistance, as well as good ultraviolet (UV) ink printability. This product is well suited for use in optical adhesives, plastic and electronic coatings and primers, and adhesive films and labels. 收起
Nichigo-Polyester WR-905 Nippon Gohsei Nichigo-Polyester WR-905 is a high molecular weight saturated polyester resin featuring good solution stability and ultraviolet (UV) ink printability. This product is well suited for use in optical adhesives, plastic and electronic coatings and primers, a...展开 Nichigo-Polyester WR-905 is a high molecular weight saturated polyester resin featuring good solution stability and ultraviolet (UV) ink printability. This product is well suited for use in optical adhesives, plastic and electronic coatings and primers, and adhesive films and labels. 收起
Nichigo-Polyester WR-961 Nippon Gohsei Nichigo-Polyester WR-961 is a high molecular weight saturated polyester resin featuring good adhesion and humidity resistance. This product is well suited for use in optical adhesives, plastic and electronic coatings and primers, and adhesive films and la...展开 Nichigo-Polyester WR-961 is a high molecular weight saturated polyester resin featuring good adhesion and humidity resistance. This product is well suited for use in optical adhesives, plastic and electronic coatings and primers, and adhesive films and labels. 收起
Polisat 620-80 X Polidur San Luis Polisat 620-80 X is a saturated polyester resin at 80 % solids in xylene. This product has excellent solubility in a wide range of solventes and excellent compatibility with most solvent based resins. It is for use as a binder for solvent based pigment pa...展开 Polisat 620-80 X is a saturated polyester resin at 80 % solids in xylene. This product has excellent solubility in a wide range of solventes and excellent compatibility with most solvent based resins. It is for use as a binder for solvent based pigment pastes. 收起
Polisat 714-70 HF Polidur San Luis Polisat 714-70 HF is a saturated poliester resin at 70% in high flash. This product offers excellent weather and yellowing resistance and very good reactivity in short bake cycles. Polisat 714-70 HF is for use in coil and can coating enamels and high sol...展开 Polisat 714-70 HF is a saturated poliester resin at 70% in high flash. This product offers excellent weather and yellowing resistance and very good reactivity in short bake cycles. Polisat 714-70 HF is for use in coil and can coating enamels and high solids stoving enamels. 收起
Polisat 738-65 X Polidur San Luis Polisat 738-65 X is a modified saturated polyester resin at 65 % in xilol. This product offers low crosslinking relation with polyurethan resins, fast dry as primers for metal and it is easy to matt. It has applications in two component polyurethane prime...展开 Polisat 738-65 X is a modified saturated polyester resin at 65 % in xilol. This product offers low crosslinking relation with polyurethan resins, fast dry as primers for metal and it is easy to matt. It has applications in two component polyurethane primers and lacquers for wood and metal of low crosslinking, two component polyurethane matt and low gloss lacquers and cellulose nitrate plasticizer. 收起
Polisat 768-80 AB Polidur San Luis Polisat 768-80 AB is a saturated polyester resin at 80 % solids in butyl acetate. This product provide excellent elasticity and yellow resistance even at elevated temperatures and it has high compatibility with hydroxylated acrylic resins. It is for use i...展开 Polisat 768-80 AB is a saturated polyester resin at 80 % solids in butyl acetate. This product provide excellent elasticity and yellow resistance even at elevated temperatures and it has high compatibility with hydroxylated acrylic resins. It is for use in 2 K PU laquers, lacquers for plastics and leather, overprinting varnishes and is an elasticity modifier of acrylic resins. 收起
Rexin DP 127 S.A.P.I.C.I. SpA Rexin DP 127 is a saturated polyester resin. This product has good abrasion and yellowing resistance. It can be used in high-gloss and fast-drying clear or pigmented 2K polyurethane coatings. It is particularly recommended for pigmented paste formulati...展开 Rexin DP 127 is a saturated polyester resin. This product has good abrasion and yellowing resistance. It can be used in high-gloss and fast-drying clear or pigmented 2K polyurethane coatings. It is particularly recommended for pigmented paste formulations. 收起
Rexin DP 202 S.A.P.I.C.I. SpA Rexin DP 202 is a silicon-free saturated polyester resin. This product can be used as a weather-resistant coating. It can also be used as an additive (around 2-3%) in baking and primer systems in order to significantly improve adhesion to an underlying ...展开 Rexin DP 202 is a silicon-free saturated polyester resin. This product can be used as a weather-resistant coating. It can also be used as an additive (around 2-3%) in baking and primer systems in order to significantly improve adhesion to an underlying substrate. 收起
Rexin DP 328 S.A.P.I.C.I. SpA Rexin DP 328 is a saturated polyester resin. This product has good abrasion resistance with good filling and solvent release. It can be used in clear or pigmented 2K polyurethane coatings. This product is compatible with nitrocellulose and can be used ...展开 Rexin DP 328 is a saturated polyester resin. This product has good abrasion resistance with good filling and solvent release. It can be used in clear or pigmented 2K polyurethane coatings. This product is compatible with nitrocellulose and can be used in combination with urea or melamine resins. 收起
Rexin DP 343 S.A.P.I.C.I. SpA Rexin DP 343 is a saturated polyester resin. This product dries quickly with good solvent release, flexibility, and high wetting properties. It can be used in pigmented sealers and topcoats. It can also be used in nitrocellulose or acid-curing coatings...展开 Rexin DP 343 is a saturated polyester resin. This product dries quickly with good solvent release, flexibility, and high wetting properties. It can be used in pigmented sealers and topcoats. It can also be used in nitrocellulose or acid-curing coatings. 收起
Rexin DP 390 S.A.P.I.C.I. SpA Rexin DP 390 is a saturated polyester resin. This product dries quickly with good flexibility, hardness, and a long pot life. It can be used in clear or pigmented matte and high gloss 2K polyurethane sealers and top coats.
Rexin DP 408/80 AB S.A.P.I.C.I. SpA Rexin DP 408/80 AB is a saturated polyester resin. This product has high chemical resistance, with good hardness and abrasion resistance. IT can be used in 2K polyurethane parquet coatings and enamels for metal applications.
Rexin DP 411 S.A.P.I.C.I. SpA Rexin DP 411 is a slightly branched solventless saturated polyester resin. This product has good chemical resistance, hardness, and flexibility. It can be used in 2K polyurethane parquet coatings.
Rexin DP 412 S.A.P.I.C.I. SpA Rexin DP 412 is a slightly branched solventless saturated polyester resin. This product has high chemical resistance and good elasticity. It can be used in coatings and enamels for metal, plastic, wood and rubber.
Rexin DP 417 S.A.P.I.C.I. SpA Rexin DP 417 is a solventless saturated polyester resin. This product has good elasticity. It can be used in enamels and coatings for paper, leather, plastic and rubber. It is particularly used for the formation of soft-touch effect coatings.
Rexin DP 430 S.A.P.I.C.I. SpA Rexin DP 430 is a solventless saturated polyester resin. This product has good elasticity. It can be used in coatings and enamels for leather, plastic, rubber and paper coatings. It is used to formulate soft-touch effect coatings.
Rexin HSP 05100 S.A.P.I.C.I. SpA Rexin HSP 05100 is a saturated polyester resin. This product has good abrasion and chemical resistance and good hardness and levelling. It can be used in high-gloss clear or pigmented 2K polyurethane coatings, especially those formulations with high sol...展开 Rexin HSP 05100 is a saturated polyester resin. This product has good abrasion and chemical resistance and good hardness and levelling. It can be used in high-gloss clear or pigmented 2K polyurethane coatings, especially those formulations with high solids content. 收起
Rexin K 1939 S.A.P.I.C.I. SpA Rexin K 1939 is a solvent-based hydroxy-terminated saturated polyester resin. When used in the formulation of inks, this product's end result is light, clear, not sticky and highly resistant to aging, chemical agents, and heat. It can be used in the for...展开 Rexin K 1939 is a solvent-based hydroxy-terminated saturated polyester resin. When used in the formulation of inks, this product's end result is light, clear, not sticky and highly resistant to aging, chemical agents, and heat. It can be used in the formulation of 2K polyurethane overprinting lacquers and inks. 收起
Rexin K 411 S.A.P.I.C.I. SpA Rexin K 411 is a branched saturated polyester. This product has high chemical resistance, abrasion resistance, and surface hardness. It is compatible with nitrocellulose, urea, and melamine resins. This product can be used in high-performance inks for ...展开 Rexin K 411 is a branched saturated polyester. This product has high chemical resistance, abrasion resistance, and surface hardness. It is compatible with nitrocellulose, urea, and melamine resins. This product can be used in high-performance inks for prolonged and continuous use. 收起
Rexin K 6258 S.A.P.I.C.I. SpA Rexin K 6258 is a branched saturated polyester resin that is soluble in ethyl acetate. This product is compatible with nitrocellulose, urea and melamine resins. It can be used in the formulation of inks and overprint varnishes.
Request Sample SETAL® 16-1084 Allnex SETAL® 16-1084 is a saturated coil-coat polyester resin for use in thermoset coatings with a high order of post-cure and cold crush flexibility.
Request Sample SETAL® 173 VS-60 Allnex SETAL® 173 VS-60 is a saturated polyester resin.
Request Sample SETAL® 20-1020 Allnex SETAL® 20-1020 is a high quality, high solids saturated polyester resin for use in thermoset coatings with a high order of durability, color, gloss retention, cured hardness and resistance properties.
Request Sample SETAL® 26-1056 Allnex SETAL® 26-1056 is a saturated polyester resin intended for use in general industrial metal finishing. This resin is capable of producing very low VOC thermoset coatings. SETAL® 26-1056 offers excellent cure qualities of hardness, toughness, gloss, flow an...展开 SETAL® 26-1056 is a saturated polyester resin intended for use in general industrial metal finishing. This resin is capable of producing very low VOC thermoset coatings. SETAL® 26-1056 offers excellent cure qualities of hardness, toughness, gloss, flow and durability. 收起