| Acclaim® Polyol 4200 | Covestro | Acclaim® Polyol 4200 is a polyether polyol that is suitable for combination with Desmodur in the formulation of solvent-free or low-solvent polyurethanes. It is suitable for combination with many Desmodur® products in the formulation of solvent-free elast...展开 Acclaim® Polyol 4200 is a polyether polyol that is suitable for combination with Desmodur in the formulation of solvent-free or low-solvent polyurethanes. It is suitable for combination with many Desmodur® products in the formulation of solvent-free elastic coatings, adhesives and sealants. Acclaim® Polyol 4200 can be thinned with solvents such as esters, ketones and aromatics. Only PU grade solvents should be used (< 0.05% by wt. water). 收起 | |
| Baybond® PU 130 | Covestro | Baybond® PU 130 has anionic/non-ionic crosslinking polyether urethane polymer, used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing, and is useful for the sizing of glass fibers u...展开 Baybond® PU 130 has anionic/non-ionic crosslinking polyether urethane polymer, used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing, and is useful for the sizing of glass fibers used to reinforce thermoplastics, especially polyamide. Glass fiber sizes based on Baybond® PU 130 have excellent filmforming properties and adhesion. This product also exhibits very good colorfastness at high temperatures and is also highly resistant to hydrolysis. Full mechanical properties of Baybond® PU 130 are developed by post-crosslinking for 20 minutes @ 170C. As with any product, use of Baybond® PU 130 in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. 收起 | |
| Baymedix® AR602 | Covestro | Baymedix® AR602 is a polyether polyol based on a tetra-functional starter molecule. | |
| Borchi® Gol 3467 | Borchers, A Company of OMG | Borchi® Gol 3467是一种聚醚改性聚二甲基硅氧烷，100％活性成分，可促进疏水或污染表面、不易润湿的木材表面的润湿，可防止流动问题和缩孔的产生。 Borchi® Gol 3467可用于水性和溶剂型体系。 | |
| GENOMER* 3364 | Rahn USA Corp. | 改性聚醚多元醇丙烯酸酯。用于自由基固化油墨、涂料和粘胶的树脂。 | Request Sample |
| GENOMER* 3414 | Rahn USA Corp. | 改性聚醚丙烯酸酯。用于自由基固化油墨、涂料和粘胶。 | Request Sample |
| GENOMER* 3430 | Rahn USA Corp. | GENOMER* 3430 is an amine modified polyether acrylate. Formulations containing GENOMER* 3430 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 3430 in combination with Type II photoinitiators and cured w...展开 GENOMER* 3430 is an amine modified polyether acrylate. Formulations containing GENOMER* 3430 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 3430 in combination with Type II photoinitiators and cured with a standard UV lamp provides rapid cure speed and improved surface cure. 收起 | Request Sample |
| GENOMER* 3457 | Rahn USA Corp. | GENOMER* 3457是一种中等粘度的产品，有高反应性，良好的耐刮擦性和耐溶剂性，中等灵活性和在各种基材上出色的粘合度。它推荐用于木材、纸张、金属和塑料涂料，油墨和清漆，工业涂料和粘合剂以及生产应用添加剂中等。 | Request Sample |
| GENOMER* 3486 | Rahn USA Corp. | GENOMER* 3486 is a very low viscosity polyester acrylate resin for UV/EB free radical-curable coatings, inks, adhesives and 3D printing. GENOMER* 3486 is recommended for applications where low viscosity, good adhesion, wear resistance and...展开 GENOMER* 3486 is a very low viscosity polyester acrylate resin for UV/EB free radical-curable coatings, inks, adhesives and 3D printing. GENOMER* 3486 is recommended for applications where low viscosity, good adhesion, wear resistance and surface hardness are required. 收起 | Request Sample |
| GENOMER* 3497 | Rahn USA Corp. | 改性聚醚多元醇丙烯酸酯。用于自由基固化油墨、涂料和粘胶的树脂。 | Request Sample |
| GENOMER* 3498 | Rahn USA Corp. | GENOMER* 3498 is a modified polyetherpolyol acrylate. Resin for radically curable inks, coatings, and adhesives. | Request Sample |
| GENOMER* 7302 | Rahn USA Corp. | GENOMER* 7302是一种硫醇改性的聚醚丙烯酸酯。包含GENOMER* 7302的配方可以直接使用UV LED，UVA或低能量的紫外灯进行固化。这款产品降低了自由基固化过程中的氧气抑制，在不增加气味的前提下改善了表面固化效果。 | Request Sample |
| GENOMER* 7311 | Rahn USA Corp. | GENOMER * 7311 is completely water-soluble prior to cure. Recommended applications are additive manufacturing, coatings for wood, paper, metal and plastics, water-based inks and varnishes. | Request Sample |
| KANEKA MS POLYMER® | Kaneka North America LLC | KANEKA MS POLYMER® is an isocyanate-free, low-VOC Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. KANEKA MS POLYMER® has performed successfully in various industrial ap...展开 KANEKA MS POLYMER® is an isocyanate-free, low-VOC Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. KANEKA MS POLYMER® has performed successfully in various industrial applications and provides well-balanced properties such as durability, reactivity, and storage stability. This unique and highly valued balance of attributes is derived from the polyether polymer backbone coupled with the various Silane functional groups, which vary based on grade. With over 40 grades available, KANEKA MS POLYMER® is suitable for a variety of requirements. 收起 | Request Sample |
| KANEKA MS POLYMER® S203H | Kaneka North America LLC | KANEKA MS POLYMER® S203H is a Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. MS Polymer® S203H has performed successfully in various industrial applications and provid...展开 KANEKA MS POLYMER® S203H is a Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. MS Polymer® S203H has performed successfully in various industrial applications and provides well-balanced properties such as durability, reactivity, and storage stability. This unique and highly valued balance of attributes is derived from the polyether polymer backbone coupled with the methyldimethoxysilane functional groups. 收起 | Request Sample |
| KANEKA MS POLYMER® S227 | Kaneka North America LLC | KANEKA MS POLYMER® S227 is a Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. MS Polymer® S227 has performed successfully in various industrial applications and provides...展开 KANEKA MS POLYMER® S227 is a Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. MS Polymer® S227 has performed successfully in various industrial applications and provides well-balanced properties such as durability, reactivity, and storage stability. This unique and highly valued balance of attributes is derived from the polyether polymer backbone coupled with the methyldimethoxysilane functional groups. 收起 | Request Sample |
| KANEKA MS POLYMER® S303H | Kaneka North America LLC | KANEKA MS POLYMER® S303H is a Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. MS Polymer® S303H has performed successfully in various industrial applications and provid...展开 KANEKA MS POLYMER® S303H is a Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. MS Polymer® S303H has performed successfully in various industrial applications and provides well-balanced properties such as durability, reactivity, and storage stability. This unique and highly valued balance of attributes is derived from the polyether polymer backbone coupled with the methyldimethoxysilane functional groups. 收起 | Request Sample |
| KANEKA MS POLYMER® S327 | Kaneka North America LLC | KANEKA MS POLYMER® S327 is a Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. MS Polymer® S327 has performed successfully in various industrial applications and provides...展开 KANEKA MS POLYMER® S327 is a Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. MS Polymer® S327 has performed successfully in various industrial applications and provides well-balanced properties such as durability, reactivity, and storage stability. This unique and highly valued balance of attributes is derived from the polyether polymer backbone coupled with the methyldimethoxysilane functional groups. 收起 | Request Sample |
| KANEKA SILYL® MA904 | Kaneka North America LLC | KANEKA SILYL® MA904 is an acrylic modified Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. SILYL MA904® has performed successfully in various industrial applications an...展开 KANEKA SILYL® MA904 is an acrylic modified Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. SILYL MA904® has performed successfully in various industrial applications and provides well-balanced properties such as durability, reactivity, and storage stability. This unique and highly valued balance of attributes is derived from the polyether polymer backbone coupled with the methyldimethoxysilane functional groups. 收起 | Request Sample |
| KANEKA SILYL® MAX951 | Kaneka North America LLC | KANEKA SILYL® MAX951 is an acrylic modified Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. SILYL MAX951® has performed successfully in various industrial applications ...展开 KANEKA SILYL® MAX951 is an acrylic modified Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. SILYL MAX951® has performed successfully in various industrial applications and provides well-balanced properties such as durability, reactivity, and storage stability. This unique and highly valued balance of attributes is derived from the polyether polymer backbone coupled with the methyldimethoxysilane functional groups. 收起 | Request Sample |
| KANEKA SILYL® SAT010 | Kaneka North America LLC | KANEKA SILYL® SAT010 is a Silyl-Terminated Polyether (STPE) used as a base resin or with other KANEKA MS Polymer® as a reactive diluent for producing high performance moisture cure sealants, adhesives, and coatings. SILYL SAT010® has performed successfull...展开 KANEKA SILYL® SAT010 is a Silyl-Terminated Polyether (STPE) used as a base resin or with other KANEKA MS Polymer® as a reactive diluent for producing high performance moisture cure sealants, adhesives, and coatings. SILYL SAT010® has performed successfully in various industrial applications and provides well-balanced properties such as durability, reactivity, and storage stability. This unique and highly valued balance of attributes is derived from the polyether polymer backbone coupled with the methyldimethoxysilane functional groups. 收起 | Request Sample |
| KANEKA SILYL® SAT115 | Kaneka North America LLC | KANEKA SILYL® SAT115 is a Silyl-Terminated Polyether (STPE) used as a base resin or with other KANEKA MS Polymer® as reactive diluent for producing high performance moisture cure sealants, adhesives, and coatings. SILYL SAT115® has performed successfully ...展开 KANEKA SILYL® SAT115 is a Silyl-Terminated Polyether (STPE) used as a base resin or with other KANEKA MS Polymer® as reactive diluent for producing high performance moisture cure sealants, adhesives, and coatings. SILYL SAT115® has performed successfully in various industrial applications and provides well-balanced properties such as durability, reactivity, and storage stability. This unique and highly valued balance of attributes is derived from the polyether polymer backbone coupled with the methyldimethoxysilane functional groups. 收起 | Request Sample |
| KANEKA SILYL® SAX220 | Kaneka North America LLC | KANEKA SILYL® SAX220 is a Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. SILYL SAX220® has performed successfully in various industrial and construction applications. ...展开 KANEKA SILYL® SAX220 is a Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. SILYL SAX220® has performed successfully in various industrial and construction applications. SILYL SAX220® provides well-balanced properties such as durability, reactivity, and storage stability. This unique and highly valued balance of attributes is derived from the polyether polymer backbone coupled with the methyldimethoxysilane functional groups. 收起 | Request Sample |
| KANEKA SILYL® SAX260 | Kaneka North America LLC | KANEKA SILYL® SAX260 is a Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. SILYL SAX260® has performed successfully in various industrial applications and provides well-...展开 KANEKA SILYL® SAX260 is a Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. SILYL SAX260® has performed successfully in various industrial applications and provides well-balanced properties such as durability, reactivity, and storage stability. This unique and highly valued balance of attributes is derived from the polyether polymer backbone coupled with the methyldimethoxysilane functional groups. 收起 | Request Sample |
| KANEKA SILYL® SAX350 | Kaneka North America LLC | KANEKA SILYL® SAX350 is a Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. SILYL SAX350® has performed successfully in various industrial applications and provides well-...展开 KANEKA SILYL® SAX350 is a Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. SILYL SAX350® has performed successfully in various industrial applications and provides well-balanced properties such as durability, reactivity, and storage stability. This unique and highly valued balance of attributes is derived from the polyether polymer backbone coupled with the methyldimethoxysilane functional groups. 收起 | Request Sample |
| KANEKA SILYL® SAX400 | Kaneka North America LLC | KANEKA SILYL® SAX400 is a Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. SILYL SAX400® has performed successfully in various industrial applications and provides well-...展开 KANEKA SILYL® SAX400 is a Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. SILYL SAX400® has performed successfully in various industrial applications and provides well-balanced properties such as durability, reactivity, and storage stability. This unique and highly valued balance of attributes is derived from the polyether polymer backbone coupled with the methyldimethoxysilane functional groups. 收起 | Request Sample |
| KANEKA SILYL® SAX510 | Kaneka North America LLC | KANEKA SILYL® SAX510 is a Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. SILYL SAX510® has performed successfully in various industrial applications. SILYL SAX510® pro...展开 KANEKA SILYL® SAX510 is a Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. SILYL SAX510® has performed successfully in various industrial applications. SILYL SAX510® provides well-balanced properties such as durability, reactivity, and storage stability. This unique and highly valued balance of attributes is derived from the polyether polymer backbone coupled with the trimethoxysilane functional groups. 收起 | Request Sample |
| KANEKA SILYL® SAX720A | Kaneka North America LLC | KANEKA SILYL® SAX720A is a Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. SILYL SAX720A® has performed successfully in various industrial applications. SILYL SAX720A® ...展开 KANEKA SILYL® SAX720A is a Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. SILYL SAX720A® has performed successfully in various industrial applications. SILYL SAX720A® provides well-balanced properties such as durability, reactivity, and storage stability. This unique and highly valued balance of attributes is derived from the polyether polymer backbone coupled with the methyldimethoxysilane functional groups. 收起 | Request Sample |
| L-2811 | Chan Sieh Enterprises Co, Ltd. | L-2811 is an aliphatic polyether polyol. This product is soft and flexible, provides water resistance, and does not yellow. It can be used to coat flexible substrates, paper, plastic, PVC, and leather. | |
| L-2812 | Chan Sieh Enterprises Co, Ltd. | L-2812 is an aliphatic polyether polyol with a solid content ratio of 30%. This product is soft and flexible, provides water resistance, and does not yellow. It can be used to coat flexible substrates, and to coat leather. | |
| L-2812M | Chan Sieh Enterprises Co, Ltd. | L-2812M is an aliphatic polyether polyol with a solid content ratio of 35%. This product is soft and flexible, provides water-resistance, and does not yellow. It can be used to coat flexible substrates, and to coat leather. | |
| L-2813 | Chan Sieh Enterprises Co, Ltd. | L-2813 is an aliphatic polyether polyol with a solid content ratio of 39%. This product is tough, solvent free, and compatible with acrylic emulsions. It can be used in peelable metal coatings, printing inks, fiberglass, floor coatings, and paper and te...展开 L-2813 is an aliphatic polyether polyol with a solid content ratio of 39%. This product is tough, solvent free, and compatible with acrylic emulsions. It can be used in peelable metal coatings, printing inks, fiberglass, floor coatings, and paper and textile coatings. 收起 | |
| L-2815 | Chan Sieh Enterprises Co, Ltd. | L-2815 is an aliphatic polyether polyol with a solid content ratio of 39%. This product is tough, is solvent free, and is compatible with acrylic emulsions. It can be used in peelable metal coatings, glass fiber sizing, leather coating, and paper and te...展开 L-2815 is an aliphatic polyether polyol with a solid content ratio of 39%. This product is tough, is solvent free, and is compatible with acrylic emulsions. It can be used in peelable metal coatings, glass fiber sizing, leather coating, and paper and textile coatings. 收起 | |
| L-2842 | Chan Sieh Enterprises Co, Ltd. | L-2842 is an aliphatic polyether polyol with a solid content ratio of 34%. This product provides good adhesion on flexible substrates and good solvent resistance. It can be used in printing inks, paper and textile coatings, and floor coatings. | |
| L-2851 | Chan Sieh Enterprises Co, Ltd. | L-2851 is an aliphatic polyether polyol with a solid content ratio of 34%. This product is tough and flexible, provides chemical and abrasion resistance, and good adhesion to substrates. It can be used in concrete coatings, wall paints, and plastic and ...展开 L-2851 is an aliphatic polyether polyol with a solid content ratio of 34%. This product is tough and flexible, provides chemical and abrasion resistance, and good adhesion to substrates. It can be used in concrete coatings, wall paints, and plastic and metal coatings. 收起 | |
| L-2855 | Chan Sieh Enterprises Co, Ltd. | L-2855 is an aliphatic polyether polyol with a solid content ratio of 28%. This product has high transparency and flexibility, good adhesion to many plastics, and cross-links well. It can be used in primers. | |
| L-2857 | Chan Sieh Enterprises Co, Ltd. | L-2857 is an aliphatic polyether polyol with a solid content ratio of 34%. This product is tough and flexible, provides good chemical and abrasion resistance, and adheres well. It can be used to coat parquet and cork floors, concrete, wall paint, metal ...展开 L-2857 is an aliphatic polyether polyol with a solid content ratio of 34%. This product is tough and flexible, provides good chemical and abrasion resistance, and adheres well. It can be used to coat parquet and cork floors, concrete, wall paint, metal and plastic. It can also be used as an anti-gravity coating. 收起 | |
| L-2869 | Chan Sieh Enterprises Co, Ltd. | L-2869 is an aliphatic polyether polyol with a solid content ratio of 39%. This product is tough, free of solvents, and is compatible with acrylic emulsions. It can be used in peelable metal coatings, printing ink and glass fiber, and floor, paper and t...展开 L-2869 is an aliphatic polyether polyol with a solid content ratio of 39%. This product is tough, free of solvents, and is compatible with acrylic emulsions. It can be used in peelable metal coatings, printing ink and glass fiber, and floor, paper and textile coatings. 收起 | |
| L-2872 | Chan Sieh Enterprises Co, Ltd. | L-2872 is an aliphatic polyether polyol with a solid content ratio of 33%. This product is highly transparent and flexible, and provides good adhesion on many plastics with good solvent resistance. It can be used in primer paints. | |
| L-2881 | Chan Sieh Enterprises Co, Ltd. | L-2881 is an aliphatic polyether polyol with a solid content ratio of 35%. This product is clear and stable, and provides heat resistance and good adhesion. It can be used in adhesive applications. | |
| L-2883 | Chan Sieh Enterprises Co, Ltd. | L-2883 is an aliphatic polyether polyol with a solid content ratio of 30%. This product is hard and flexible, provides good abrasion and chemical resistance, with good adhesion. It can be used to coat paper, plastic, concrete, metal, wood, parquet and l...展开 L-2883 is an aliphatic polyether polyol with a solid content ratio of 30%. This product is hard and flexible, provides good abrasion and chemical resistance, with good adhesion. It can be used to coat paper, plastic, concrete, metal, wood, parquet and lacquer. 收起 | |
| L-2887 | Chan Sieh Enterprises Co, Ltd. | L-2887 is an aliphatic polyether polyol with a solid content ratio of 40%. This product is soft and flexible, and provides UV and abrasion resistance. It can be used as a lacquer for cork floors, and for wood and parquet. | |
| L-2891 | Chan Sieh Enterprises Co, Ltd. | L-2891 is an aliphatic polyether polyol with a solid content ratio of 35%. This product is tough and flexible with good adhesion. It can be used in adhesives and as a coating for leather. | |
| LAROMER® PO 94 F | BASF Dispersions & Resins | Laromer® PO 94 F is an amine-modified polyether acrylate containing amino groups. Owing to its high reactivity, it is frequently combined with other energy curable resins to increase the reactivity of the formulation. Laromer® PO 94 F offers low vis...展开 Laromer® PO 94 F is an amine-modified polyether acrylate containing amino groups. Owing to its high reactivity, it is frequently combined with other energy curable resins to increase the reactivity of the formulation. Laromer® PO 94 F offers low viscosity and the highest reactivity, making it useful in a variety of applications. In addition, it can be used as a sole binder in low viscosity, highly reactive inks or coatings. 收起 | |
| LumiSet™ LSR-141 | Bomar, formerly Dymax Oligomers & Coatings | LumiSet™ LSR-141 is a urethane methacrylate polymeric resin designed for use in base and color coat applications for hybrid and long-wear nail lacquers. Synthesized using building blocks from nail gel chemistries, LSR-141 is a solvent-borne film-forming r...展开 LumiSet™ LSR-141 is a urethane methacrylate polymeric resin designed for use in base and color coat applications for hybrid and long-wear nail lacquers. Synthesized using building blocks from nail gel chemistries, LSR-141 is a solvent-borne film-forming resin that can offer nail lacquer formulators the benefits of adhesion and durability from nail gels while also achieving a tack-free finish, without the need for UV or LED lamps. The combination of excellent adhesion, flexibility, and toughness offers formulators an alternative to other leachable plasticizers or potentially toxic adhesion promoters. The excellent adhesion of LSR-141 allows for the combination of color and base coats into one step. Base and color coats formulated with LSR-141 should also be paired with a hydrophobic top coat due to the hydrophilic nature of LSR-141. LSR-141 is INCI registered, and can be formulated to cure with sunlight exposure using appropriate INCI-registered photoinitiators. 收起 | |
| LumiSet™ LSR-241 | Bomar, formerly Dymax Oligomers & Coatings | LumiSet™ LSR-241 is a hydrophobic urethane methacrylate resin designed for use in top coat applications for hybrid and long-wear nail lacquers. Synthesized using building blocks from nail gel chemistries, LSR-241 is a solvent-borne film-forming resin that...展开 LumiSet™ LSR-241 is a hydrophobic urethane methacrylate resin designed for use in top coat applications for hybrid and long-wear nail lacquers. Synthesized using building blocks from nail gel chemistries, LSR-241 is a solvent-borne film-forming resin that can offer nail lacquer formulators the benefits of impact resistance, gloss, and durability from nail gels while also achieving a tack-free finish without the need for UV or LED lamps. The combination of toughness, gloss, and hydrophobicity offers formulators an alternative to leachable plasticizers or potentially toxic gloss enhancers. Top coats formulated with LSR-241 should be paired with an adhesion-promoting base coat or base/color coat combo to ensure proper adhesion to the nail bed. LSR-241 is INCI registered and can be formulated to cure with sunlight exposure using appropriate INCI-registered photoinitiator. 收起 | |
| LumiSet™ LSR-241P | Bomar, formerly Dymax Oligomers & Coatings | LumiSet™ LSR-241P is a hydrophobic urethane methacrylate resin designed for use in top coat applications for hybrid and long-wear nail lacquers. Synthesized using building blocks from nail gel chemistries, LSR-241P is a solvent-borne film-forming resin th...展开 LumiSet™ LSR-241P is a hydrophobic urethane methacrylate resin designed for use in top coat applications for hybrid and long-wear nail lacquers. Synthesized using building blocks from nail gel chemistries, LSR-241P is a solvent-borne film-forming resin that can offer nail lacquer formulators the benefits of impact resistance and durability from nail gels while also achieving a tack-free finish without the need for UV or LED lamps. The combination of toughness, and hydrophobicity offers formulators an alternative to leachable plasticizers or potentially toxic gloss enhancers. Top coats formulated with LSR-241P should be paired with an adhesion-promoting base coat or base/color coat combo to ensure proper adhesion to the nail bed. LSR-241P is INCI registered and can be formulated to cure with sunlight exposure using appropriate INCI-registered photoinitiators. Adding cellulosic film formers to this neat polyurethane resin increases the tack free dry time to acceptable nail lacquer dry times of two minutes or less. 收起 | |
| MIRAMER M140 | Rahn USA Corp. | 聚醚丙烯酸基，光固化油墨、涂料和粘胶的活性稀释剂。 | Request Sample |
| Multranol® 9181 | Covestro | Multranol® 9181 is a 290-molecular-weight tetrafunctional amine-based polyether polyol designed for use in the production of rigid foams, adhesives, caulking, and sealants. As with any product, use of Multranol® 9181 polyol in a given application must be ...展开 Multranol® 9181 is a 290-molecular-weight tetrafunctional amine-based polyether polyol designed for use in the production of rigid foams, adhesives, caulking, and sealants. As with any product, use of Multranol® 9181 polyol in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability. 收起 | |
| Multranol® 9198 | Covestro | Multranol® 9198 is a polypropylene oxide-based diol. This polyol is typically used in the production of specialty elastomers, foams, and adhesives. As with any product, use of Multranol® 9198 polyol in a given application must be tested (including field t...展开 Multranol® 9198 is a polypropylene oxide-based diol. This polyol is typically used in the production of specialty elastomers, foams, and adhesives. As with any product, use of Multranol® 9198 polyol in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability. 收起 | |
| PEL-SIL™ CX740 | Ele Corporation | PEL-SIL™ CX740 is an epoxy functionalized siloxane polyether. With its silicone and organic combination and dual reactive hydroxy and epoxy functionality, PEL-SIL™ CX740 offers unique capability to modify epoxy and polyurethane systems. It can impart surf...展开 PEL-SIL™ CX740 is an epoxy functionalized siloxane polyether. With its silicone and organic combination and dual reactive hydroxy and epoxy functionality, PEL-SIL™ CX740 offers unique capability to modify epoxy and polyurethane systems. It can impart surface and bulk properties, such as gloss, slip, hydrophobicity, and mechanical. Due to its low viscosity, PEL-SIL™ CX740 enhances the process for better mixing and flow for compounds and composites. 收起 | |
| PEO-1 | Sumitomo Seika America, Inc. | PEO-1 is a nonionic water-soluble thermoplastic polymer. PEO-1 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PEO-15 | Sumitomo Seika America, Inc. | PEO-15 is a nonionic water-soluble thermoplastic polymer. PEO-15 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PEO-18 | Sumitomo Seika America, Inc. | PEO-18 is a nonionic water-soluble thermoplastic polymer. PEO-18 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PEO-2 | Sumitomo Seika America, Inc. | PEO-2 is a nonionic water-soluble thermoplastic polymer. PEO-2 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PEO-27 | Sumitomo Seika America, Inc. | PEO-27 is a nonionic water-soluble thermoplastic polymer. PEO-27 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PEO-29 | Sumitomo Seika America, Inc. | PEO-29 is a nonionic water-soluble thermoplastic polymer. PEO-29 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PEO-3 | Sumitomo Seika America, Inc. | PEO-3 is a nonionic water-soluble thermoplastic polymer. PEO-3 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PEO-4 | Sumitomo Seika America, Inc. | PEO-4 is a nonionic water-soluble thermoplastic polymer. PEO-4 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PEO-8 | Sumitomo Seika America, Inc. | PEO-8 is a nonionic water-soluble thermoplastic polymer. PEO-8 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| Polurene LPI 433 | S.A.P.I.C.I. SpA | Polurene LPI 433 is a MDI polyether, 2K 100% solid content adhesive. This product has strong initial bond. It can be used in PVC, expanded polyurethane, and natural or synthetic fabrics. | |
| Poly-Solv® TPM | Monument Chemical | Poly-Solv® TPM, also known as Poly-Solv® Tripropylene Glycol Monomethyl Ether, is a colorless, clear liquid. It has a specific gravity of 0.969, and a molecular weight of 206.3. This product is used in varnishes, paints, hydraulic fluids, and cutting oils...展开 Poly-Solv® TPM, also known as Poly-Solv® Tripropylene Glycol Monomethyl Ether, is a colorless, clear liquid. It has a specific gravity of 0.969, and a molecular weight of 206.3. This product is used in varnishes, paints, hydraulic fluids, and cutting oils. 收起 | |
| PTG 2900SN | Univar Solutions | PTG 2900SN is a liquid to waxy, white solid diol that melts to a clear, colorless, viscous liquid, when reacted to isocyanates provides cold temperature flex and improved chemical and corrosion resistance. | Request Sample |
| PTMG | Kowa American Corporation | PTMG (Poly(tetramethylene ether)glycol / PTMG) is a linear polyether glycol with hydroxyl groups on both ends. As a polyol, it reacts readily with isocyanates (i.e., MDI, TDI, etc.) to produce resins with excellent properties such as impact resistance, hy...展开 PTMG (Poly(tetramethylene ether)glycol / PTMG) is a linear polyether glycol with hydroxyl groups on both ends. As a polyol, it reacts readily with isocyanates (i.e., MDI, TDI, etc.) to produce resins with excellent properties such as impact resistance, hydrolysis resistance, wear resistance, tear resistance, fungus resistance and low temperature flexibility. The Polyurethane applications are Polyurethane Elastomers, Thermoset Elastomers (TSU), Thermoplastic Elastomers (TPU), Paints and Coatings, Adhesives and Sealants, and Artificial Suede and Synthetic Leather. The Polyester Applications are Polyester Elastomers (TPEE), Polyamide Applications and Polyether Amide Elastomers. 收起 | Request Sample |
| Sancure™ 20025F | Lubrizol Advanced Materials, Inc. | Sancure™ 20025F is a soft elastic aliphatic polyester urethane polymer dispersion. It has very low VOC content and contains no alkylphenol ethoxylates (APEO). It is designed to be used in textile and nonwoven coating formulations for polyester and nylon f...展开 Sancure™ 20025F is a soft elastic aliphatic polyester urethane polymer dispersion. It has very low VOC content and contains no alkylphenol ethoxylates (APEO). It is designed to be used in textile and nonwoven coating formulations for polyester and nylon fabrics. It can be used as a component in tie coats and laminating adhesives. Sancure 20025F can be crosslinked using melamine formaldehyde resins, isocyanate crosslinkers, polyfunctional aziridines, or carbodiimides. 收起 | |
| Siltech® C-442 | Siltech Corp. | Siltech® C-442 is a 100% active polyether siloxane copolymer that is primarily used to eliminate cratering and to improve slip. It is used in solvent-based, water-based and energy curing coatings and inks formulations to eliminate cratering, improve slip,...展开 Siltech® C-442 is a 100% active polyether siloxane copolymer that is primarily used to eliminate cratering and to improve slip. It is used in solvent-based, water-based and energy curing coatings and inks formulations to eliminate cratering, improve slip, anti-blocking and flow. Siltech®C-442 prevents pigment flotation and provides mar resistance. 收起 | |
| Siltech®C-176 | Siltech Corp. | Siltech®C-176 is a solution of a polyether modified polydimethyl siloxane that is primarily used to provide wetting on critical substrates and improve slip and gloss. This product is used primarily solvent-based coatings, but it is also suitable for solve...展开 Siltech®C-176 is a solution of a polyether modified polydimethyl siloxane that is primarily used to provide wetting on critical substrates and improve slip and gloss. This product is used primarily solvent-based coatings, but it is also suitable for solvent free and water-based systems. 收起 | |
| SPECFLEX 334-028 | Univar Solutions | SPECFLEX 334-028 is a reactive styrene acrylonitrile (SAN) based copolymer polyether polyol with 22% solid content especially developed for the production of high resilience (HR) and combustion modified high resilience (CMHR) flexible slabstock foams. | Request Sample |
| SPECFLEX NC 630 | Univar Solutions | SPECFLEX NC 630 is a high functionality, EO capped, polyether product. Its high molecular weight, functionality and high primary hydroxyl content make it well suited for high resilience, flexible molded foams. | Request Sample |
| SPECFLEX NC 701 | Univar Solutions | SPECFLEX NC 701 is a unique grafted polyether polyol containing copolymerized styrene and acrylonitrile. It is designed for use in the manufacture of high resiliency (HR) flexible molded foam, high comfort flexible foam and semi-flexible foam. It can also...展开 SPECFLEX NC 701 is a unique grafted polyether polyol containing copolymerized styrene and acrylonitrile. It is designed for use in the manufacture of high resiliency (HR) flexible molded foam, high comfort flexible foam and semi-flexible foam. It can also be used to produce high-loadbearing foams over a wide density range. 收起 | Request Sample |
| VORALUX HL 431 | Univar Solutions | VORALUX HL 431 is a unique grafted polyether polyol containing copolymerized styrene and acrylonitrile and filtered to 100 microns. It is used in the manufacture of flexible slabstock polyurethane foams and is manufactured without BHT and processes well o...展开 VORALUX HL 431 is a unique grafted polyether polyol containing copolymerized styrene and acrylonitrile and filtered to 100 microns. It is used in the manufacture of flexible slabstock polyurethane foams and is manufactured without BHT and processes well on most types of foam machinery. 收起 | Request Sample |
| VORANOL 2000LM | Univar Solutions | VORANOL 2000LM is a low-monol polyol that has a true diol functionality. Offers superior dynamic as well as mechanical properties to applications. VORANOL™ 2000LM is used in the manufacture of pre-polymers for adhesives and sealants. | Request Sample |
| VORANOL 220-028 | Univar Solutions | VORANOL 220-028 is a non-neutralized 4000 molecular weight polyether diol with a hydroxyl number of 28 used across a wide range of applications including adhesives, sealants, coatings, castings, foams and binders. | Request Sample |
| VORANOL 220-056 | Univar Solutions | VORANOL 220-056 is a non-neutralized 2000 molecular weight polyether diol with a hydroxyl number of 56 used across a wide range of applications including adhesives, sealants, coatings, castings, foams and binders. | Request Sample |
| VORANOL 220-056N | Univar Solutions | VORANOL 220-056N is a neutralized 2000 molecular weight polyether diol with a hydroxyl number of 56 used across a wide range of applications including adhesives, sealants, coatings, castings, foams and binders. | Request Sample |
| VORANOL 220-110 | Univar Solutions | VORANOL 220-110 is a non-neutralized 1000 molecular weight polyether diol with a hydroxyl number of 110 used across a wide range of applications including adhesives, sealants, coatings, castings, foams and binders. | Request Sample |
| VORANOL 220-110N | Univar Solutions | VORANOL 220-110N is a neutralized 1000 molecular weight polyether diol with a hydroxyl number of 110 used across a wide range of applications including adhesives, sealants, coatings, castings, foams and binders. | Request Sample |
| VORANOL 220-260 | Univar Solutions | VORANOL 220-260 is a non-neutralized 425 molecular weight polyether diol with a hydroxyl number of 260 used across a wide range of applications including adhesives, sealants, coatings, castings, foams and binders. | Request Sample |
| VORANOL 220-530 | Univar Solutions | VORANOL 220-530 is an amine initiated 212 molecular weight polyether diol with a hydroxyl number of 530, with compaitbility with polybutadiene-based polyols, used across a wide range of applications including electrical potting & encapsulation, adhesives,...展开 VORANOL 220-530 is an amine initiated 212 molecular weight polyether diol with a hydroxyl number of 530, with compaitbility with polybutadiene-based polyols, used across a wide range of applications including electrical potting & encapsulation, adhesives, sealants, coatings, castings, foams and binders. 收起 | Request Sample |
| VORANOL 222-028LM | Univar Solutions | VORANOL 222-028LM is a fast reactivity polyol with nearly true diol functionality and high primary hydroxyl content. Low-monol polyols are characterized by excellent consistency in reactivity due to precise control of functionality, OH content, water cont...展开 VORANOL 222-028LM is a fast reactivity polyol with nearly true diol functionality and high primary hydroxyl content. Low-monol polyols are characterized by excellent consistency in reactivity due to precise control of functionality, OH content, water content, and basicity. 收起 | Request Sample |
| VORANOL 222-029 | Univar Solutions | VORANOL 222-029 is a fast reacting 4000 molecular weight polyether diol with high primay hydroxyl content with a OH number of 29 used across a wide range of applications including prepolymer manufacturing, adhesives, sealants, coatings, castings, foams an...展开 VORANOL 222-029 is a fast reacting 4000 molecular weight polyether diol with high primay hydroxyl content with a OH number of 29 used across a wide range of applications including prepolymer manufacturing, adhesives, sealants, coatings, castings, foams and binders. 收起 | Request Sample |
| VORANOL 222-056 | Univar Solutions | VORANOL 222-056 is a fast reacting 2000 molecular weight high primary hydroxyl polyether diol with a hydroxyl number of 56 used across a wide range of applications including pre-polymer & PUD manufacturing, adhesives, sealants, coatings, castings, foams a...展开 VORANOL 222-056 is a fast reacting 2000 molecular weight high primary hydroxyl polyether diol with a hydroxyl number of 56 used across a wide range of applications including pre-polymer & PUD manufacturing, adhesives, sealants, coatings, castings, foams and binders. 收起 | Request Sample |
| VORANOL 223-060LM | Univar Solutions | VORANOL 223-060LM is a polyether polyol that offers enhanced mechanical performance, abrasion and long-term durability compared to conventional propylene glycol (PPG) systems (PPG+). It enables optimized microphase separation from conventional urethane ha...展开 VORANOL 223-060LM is a polyether polyol that offers enhanced mechanical performance, abrasion and long-term durability compared to conventional propylene glycol (PPG) systems (PPG+). It enables optimized microphase separation from conventional urethane hard segment chemistries to permit formulation of high-performance polyurethane systems. This innovative upgrade continues to offer the excellent processing performance of standard polyether materials. 收起 | Request Sample |
| VORANOL 230-056 | Univar Solutions | VORANOL 230-056 is a non-neutralized 3000 molecular weight polyether triol with a hydroxyl number of 56 used across a wide range of applications including storage stable prepolymers, adhesives, sealants, coatings, castings, foams and binders. | Request Sample |
| VORANOL 230-112 | Univar Solutions | VORANOL 230-112 is a non-neutralized 1500 molecular weight polyether triol with a hydroxyl number of 112 used across a wide range of applications including prepolymers, adhesives, sealants, coatings, castings, foams and binders. | Request Sample |
| VORANOL 230-238 | Univar Solutions | VORANOL 230-238 is a non-neutralized 700 molecular weight polyether triol with a hydroxyl number of 238 used across a wide range of applications including prepolymers, adhesives, sealants, coatings, castings, foams and binders. | Request Sample |
| VORANOL 230-660 | Univar Solutions | VORANOL 230-660 is a non-neutralized 600 molecular weight polyether triol with a hydroxyl number of 660 used across a wide range of applications including prepolymers, adhesives, sealants, coatings, castings, foams and binders. | Request Sample |
| VORANOL 232-028 | Univar Solutions | VORANOL 232-028 is a fast reacting non-neutralized 5900 molecular weight polyether triol with a high primary hydroxyl content with an OH number of 28 used across a wide range of applications including prepolymers, adhesives, sealants, coatings, castings, ...展开 VORANOL 232-028 is a fast reacting non-neutralized 5900 molecular weight polyether triol with a high primary hydroxyl content with an OH number of 28 used across a wide range of applications including prepolymers, adhesives, sealants, coatings, castings, foams and binders. 收起 | Request Sample |
| VORANOL 232-034 | Univar Solutions | VORANOL 232-034 is a fast reacting non-neutralized 4800 molecular weight polyether triol with a high primary hydroxyl content with an OH number of 34 used across a wide range of applications including prepolymers, adhesives, sealants, coatings, castings, ...展开 VORANOL 232-034 is a fast reacting non-neutralized 4800 molecular weight polyether triol with a high primary hydroxyl content with an OH number of 34 used across a wide range of applications including prepolymers, adhesives, sealants, coatings, castings, foams and binders. 收起 | Request Sample |
| VORANOL 232-035 | Univar Solutions | VORANOL 232-035 is a fast reacting non-neutralized 4800 molecular weight polyether triol with a high primary hydroxyl content with an OH number of 35 used across a wide range of applications including prepolymers, adhesives, sealants, coatings, castings, ...展开 VORANOL 232-035 is a fast reacting non-neutralized 4800 molecular weight polyether triol with a high primary hydroxyl content with an OH number of 35 used across a wide range of applications including prepolymers, adhesives, sealants, coatings, castings, foams and binders. 收起 | Request Sample |
| VORANOL 280 | Univar Solutions | VORANOL 280 is a sucrose/glycerine initiated polyol with low viscosity finding benefit in all-water-blown, pour-in-place applications. This polyol is typically blended with lower functionality polyols. Typical applications include insulated garage and ent...展开 VORANOL 280 is a sucrose/glycerine initiated polyol with low viscosity finding benefit in all-water-blown, pour-in-place applications. This polyol is typically blended with lower functionality polyols. Typical applications include insulated garage and entry doors, portable coolers, flotation products, and roofing and sheathing laminated products. 收起 | Request Sample |
| VORANOL 360 | Univar Solutions | VORANOL 360 is a low viscosity sucrose/glycerine initiated polyether polyol with a OH number of 4.5 designed for the production of both high and low density rigid polyurethane foams. It can be used alone, or in combination with other polyols or fire retar...展开 VORANOL 360 is a low viscosity sucrose/glycerine initiated polyether polyol with a OH number of 4.5 designed for the production of both high and low density rigid polyurethane foams. It can be used alone, or in combination with other polyols or fire retardant agents, to achieve desired properties. 收起 | Request Sample |
| VORANOL 370 | Univar Solutions | VORANOL 370 is a sucrose/glycerine initiated polyether polyol is a 7.0 functional, designed for the production of rigid polyurethane foam. It is suitable for production of both high and low density foams. It can be used alone, or in combination with other...展开 VORANOL 370 is a sucrose/glycerine initiated polyether polyol is a 7.0 functional, designed for the production of rigid polyurethane foam. It is suitable for production of both high and low density foams. It can be used alone, or in combination with other polyols or fire retardant agents, to achieve various degrees of crosslinking. It is especially suitable for foam applications that require a high strength-to-density ratio. The high degree of crosslinking afforded by VORANOL 370 polyol provides excellent dimensional stability under both humid aging and dry heat aging conditions. . 收起 | Request Sample |
| VORANOL 4000LM | Univar Solutions | VORANOL 4000LM is a homopolymer diol with an molecular weight of 4000 mainly used for the manufacture of prepolymers for coatings, adhesives and sealants. The product enables the creation of cast elastomers, adhesives and sealants with excellent mechanica...展开 VORANOL 4000LM is a homopolymer diol with an molecular weight of 4000 mainly used for the manufacture of prepolymers for coatings, adhesives and sealants. The product enables the creation of cast elastomers, adhesives and sealants with excellent mechanical properties. Due to its true functionality and low viscosity, it has the potential to reduce the use of more expensive polyols in the overall polyurethane formulation. 收起 | Request Sample |
| VORANOL 4053 | Univar Solutions | VORANOL 4053 is a high functionality EO rich polyether polyol finding benefit in high resiliency (HR), molded, semi-rigid and flexible foams. It also offers excellent cell opening when used in flexible foam formulations. It may be used at low levels (0.5 ...展开 VORANOL 4053 is a high functionality EO rich polyether polyol finding benefit in high resiliency (HR), molded, semi-rigid and flexible foams. It also offers excellent cell opening when used in flexible foam formulations. It may be used at low levels (0.5 – 5.0 php) without significant loss of foam hardness. 收起 | Request Sample |
| VORANOL 4240 | Univar Solutions | VORANOL 4240 is a 4000 molecular weight diol based on propylene oxide with ethylene oxide capping. Its high molecular weight and enhanced reactivity make it well suited to use in the production of high performance polyurethane elastomers, prepolymers, coa...展开 VORANOL 4240 is a 4000 molecular weight diol based on propylene oxide with ethylene oxide capping. Its high molecular weight and enhanced reactivity make it well suited to use in the production of high performance polyurethane elastomers, prepolymers, coatings and adhesives. 收起 | Request Sample |
| VORANOL 490 | Univar Solutions | VORANOL 490 is a sucrose/glycerine initiated 4.3 functional, polyether polyol designed for the production of low & high density rigid polyurethane foam. VORANOL 490 polyol can be used alone, or in combination with other polyols or fire retardant agents, t...展开 VORANOL 490 is a sucrose/glycerine initiated 4.3 functional, polyether polyol designed for the production of low & high density rigid polyurethane foam. VORANOL 490 polyol can be used alone, or in combination with other polyols or fire retardant agents, to achieve various degrees of crosslinking. 收起 | Request Sample |
| VORANOL 800 | Univar Solutions | VORANOL 800 is an aliphatic-amine initiated polyol designed for blending with other polyols. It offers lower viscosity than VORANOL 770 polyol and exhibits excellent HCFC-134a compatibility. VORANOL 800 polyol provides autocatalytic activity, reducing cat...展开 VORANOL 800 is an aliphatic-amine initiated polyol designed for blending with other polyols. It offers lower viscosity than VORANOL 770 polyol and exhibits excellent HCFC-134a compatibility. VORANOL 800 polyol provides autocatalytic activity, reducing catalyst requirements and improving flow, compressive strength, and Kfactor when blended with other rigid polyols. Typical applications include foam core laminate, pour-in-place insulation, spray insulation, packaging, polyol blends. 收起 | Request Sample |
| VORANOL 8000LM | Univar Solutions | VORANOL 8000LM is a homopolymer diol with a molecular weight of 8000 Da, and with a real functionality close to 2. It is used to make high performance PU adhesives, sealants, and elastomers. | Request Sample |
| VORANOL CP-6001 | Univar Solutions | VORANOL CP-6001 is a triol polyether polyol, capped, 6000 MW, specially developed for the production of flexible HR moulded polyurethane foam with TDI, TDI/ PMDI or MDI. It can be used in the production of semi-rigid integral skin foams as well as in the ...展开 VORANOL CP-6001 is a triol polyether polyol, capped, 6000 MW, specially developed for the production of flexible HR moulded polyurethane foam with TDI, TDI/ PMDI or MDI. It can be used in the production of semi-rigid integral skin foams as well as in the production of cold cure moulded foams and high resilience moulded. 收起 | Request Sample |
