| ADDITOL® BDK | Allnex | ADDITOL® BDK is a general-purpose radical photoinitiator that can be used alone or in combination with other photoinitiators. It is used in formulations containing unsaturated materials such as acrylates, methacrylates, vinyls and unsaturated polyesters. ...展开 ADDITOL® BDK is a general-purpose radical photoinitiator that can be used alone or in combination with other photoinitiators. It is used in formulations containing unsaturated materials such as acrylates, methacrylates, vinyls and unsaturated polyesters. With exposure to UV light, ADDITOL® BDK undergoes a photochemical reaction that generates radicals. 收起 | Request Sample |
| ADDITOL® CPK | Allnex | ADDITOL® CPK is a radical photoinitiator that can be used alone or in combination with other photoinitiators. It is used in formulations containing unsaturated materials such as acrylates, methacrylates, vinyls and unsaturated polyesters. With exposure to...展开 ADDITOL® CPK is a radical photoinitiator that can be used alone or in combination with other photoinitiators. It is used in formulations containing unsaturated materials such as acrylates, methacrylates, vinyls and unsaturated polyesters. With exposure to UV light, ADDITOL® CPK undergoes a photochemical reaction that generates radicals. These radicals will initiate polymerization through the unsaturated groups present in the system. Suggested applications for ADDITOL® CPK include: paper upgrading, wood top-coats, hard-coats for plastics, overprint varnishes, vinyl flooring, metal coatings, exterior applications, general coating applications where low yellowing is critical, and inks and pigmented coatings (in combination with other photoinitiators). 收起 | Request Sample |
| ADDITOL® TPO | Allnex | ADDITOL TPO是一种自由基光引发剂，可单独使用或结合其它光引发剂使用。它可用于引发含不饱和基团的材料，例如丙烯酸酯、甲基丙烯酸酯、乙烯基和不饱和聚酯。接触到紫外线，ADDITOL TPO会进行光化学反应产生自由基。这些自由基会引发体系中存在的不饱和基团进行聚合 | Request Sample |
| Benzophenone | Chongqing Changfeng Chemical Co., Ltd. | Benzophenone is a white to whitish crystal or flake with a light odor. It is a photo-initiator and can be used in UV-curing applications such as inks and clear coatings. | |
| CF19-2615 | NuSil Silicone Technology 1 | CF19-2615 is a two-part, silicone elastomer that is optically clear and solvent free. It cures at room temperature or rapidly with the addition of heat. This product can be use for photonics applications such as photo detectors, HBLEDs, lasers, flat panel...展开 CF19-2615 is a two-part, silicone elastomer that is optically clear and solvent free. It cures at room temperature or rapidly with the addition of heat. This product can be use for photonics applications such as photo detectors, HBLEDs, lasers, flat panel displays and discrete optics that require a 1.41 refractive index. It can also provide protection to electronic components and assemblies against vibration, shock, moisture, dust and other environmental hazards. 收起 | |
| CN371 | Sartomer Americas | 双官能胺辅助引发剂，与苯甲酮等光敏剂联合使用，能够促进在UV光下的快速固化。同时还能够降低气味、减少表面析出。 | |
| CN373 | Sartomer Americas | 活性胺辅助引发剂，如果与苯甲酮或异丙基噻吨酮等夺氢型光引发剂联合，可以促进自由基聚合。加速表面固化速度；克服UV固化涂料中的氧气抑制作用。 | |
| Doublecure® 107 | Double Bond Chemical Ind., Co., Ltd. | 第一种NorrishΙ型光引发剂，特别开发用于有色UV固化体系。该产品一经投入市场就迅速在UV油墨和阻焊剂行业受到追捧。 | |
| Doublecure® 1130 | Double Bond Chemical Ind., Co., Ltd. | 基于碘鎓化合物的阳离子光引发剂，用于引发环氧化物和其他阳离子聚合材料在紫外光下的聚合。它与大多数阳离子紫外光体系相容，非常适合金属、塑料和纸张基材的薄涂和透明涂料 | |
| Doublecure® 115 | Double Bond Chemical Ind., Co., Ltd. | 反应性胺添加剂，通常用于代替短效胺增效剂，以增加紫外光固化涂料的固化速度 | |
| Doublecure® 1172 | Double Bond Chemical Ind., Co., Ltd. | 基于锍化学的新型阳离子光引发剂，当它用于引发环氧化合物和其它阳离子聚合材料在紫外光中的聚合时，检测不到苯产生。DOUBLECURE® 1172与大多数阳离子紫外光体系相容，是金属、塑料和纸张用薄涂透明涂料的理想选择 | |
| Doublecure® 1176 | Double Bond Chemical Ind., Co., Ltd. | 基于锍化合物的阳离子光引发剂，用于引发环氧化物和其他阳离子聚合材料在紫外光下的聚合。它与大多数阳离子紫外光体系相容，非常适合金属、塑料和纸张基材的薄涂和透明涂料 | |
| Doublecure® 1190 | Double Bond Chemical Ind., Co., Ltd. | 基于锍化合物的阳离子光引发剂，用于引发环氧化物和其他阳离子聚合材料在紫外光下的聚合。它与大多数阳离子紫外光体系相容，非常适合金属、塑料和纸张基材的薄涂和透明涂料 | |
| Doublecure® 1256 | Double Bond Chemical Ind., Co., Ltd. | 不黄变液体光引发剂，特别设计用于不饱和聚酯或厚膜丙烯酸紫外光固化涂料。它在位于374nm的最大波长处具有少量吸收，因此非常适合用于白色颜料体系 | |
| Doublecure® 173 | Double Bond Chemical Ind., Co., Ltd. | 液态不黄变的光引发剂，良好的溶解性使其可理想的用于制备光引发剂混合物。它是木器、金属、塑料用涂料以及紫外光固化胶粘剂的可选引发剂 | |
| Doublecure® 1819 | Double Bond Chemical Ind., Co., Ltd. | 光引发剂，用于不饱和树脂的紫外光固化聚合。它建议用于白色配方，光纤增强聚酯/苯乙烯体系的固化，可结合光稳定剂用于户外用清漆 | |
| Doublecure® 1819DW | Double Bond Chemical Ind., Co., Ltd. | 特别适合用于有色水性聚氨酯乳液固化，PU分散清漆的日光固化。 Doublecure® 1819DW是一种二酰基磷化氢氧化物在水里的分散体。 | |
| Doublecure® 184 | Double Bond Chemical Ind., Co., Ltd. | 低黄变UV辐射固化体系的最佳选择。它是一种α断裂型光引发剂，兼具高光固化速度和极好的保存期限。它的不黄变和低刺激性使它非常适合用于纸张、地坪、金属、塑胶和木器用透明涂料 | |
| Doublecure® 2-ITX | Double Bond Chemical Ind., Co., Ltd. | 一种理想的光敏剂，适用于有色UV涂料体系。它结合一种类似Doublecure® EPD的光催化剂，可在大多数UV场合获得满意的效果。 | |
| Doublecure® 200 | Double Bond Chemical Ind., Co., Ltd. | 液体不黄变的光敏剂，良好的溶解性使其可理想的用于制备光引发剂混合物。它是木器、金属、塑料用涂料以及不黄变性能至关重要的紫外光固化胶粘剂的可选引发剂 | |
| Doublecure® 225 | Double Bond Chemical Ind., Co., Ltd. | 反应性胺添加剂，通常用于代替短效胺增效剂，以增加紫外光固化涂料的固化速度。当DOUBLECURE® 225结合其它光引发剂，可增加固化速度，尤其是在表面，可明显观察到。其它的优点包括浅色、低粘度、改善的稳定性和低挥发性 | |
| Doublecure® 369 | Double Bond Chemical Ind., Co., Ltd. | 强效Norrish I型光引发剂，特别设计用于深色体系。由于其独特的聚合结构，DOUBLECURE® 3690能为配方师提供下列优点：高感光速度、低粘度液体、与颜料高相容性 | |
| Doublecure® 3959 | Double Bond Chemical Ind., Co., Ltd. | Doublecure® 3959是一种高效不黄变的自由基引发剂，适合UV固化体系，含不饱和单体和预聚物。活性羟基基团可与合适的功能性不饱和树脂反应。该白色粉末尤其适合需要低气味的应用，适用于基于丙烯酸酯或不饱和聚酯树脂的水性体系。它主要用于在木材、金属、塑胶和纸张上的可紫外固化配方 | |
| Doublecure® 550 | Double Bond Chemical Ind., Co., Ltd. | 两种光引发剂DOUBLECURE® 184和DOUBLECURE® BP的液体混合物。用于引发化学低聚物例如各种丙烯酸酯以及单或多官能团单体的光聚合反应。由于液态性质，使其成为纸张、地板、金属、塑料、木器透明涂料尤其是水性紫外光固化涂料体系的理想选择 | |
| Doublecure® 575 | Double Bond Chemical Ind., Co., Ltd. | Doublecure® 575是一种液态、低气味、低黄变的光引发剂，是金属、塑料、木器用 UV 涂料的理想选择。Doublecure 575 可以应用于印刷油墨（丝印、胶印）、木器漆、汽车原厂漆、修补漆、塑料底涂漆、UV 胶、条形码等各方面。 | |
| Doublecure® 645 | Double Bond Chemical Ind., Co., Ltd. | 一种特殊的叔胺丙烯酸酯单体，特别适合用于纸张和木板上的高光泽UV固化清漆。该产品结合苯甲酮后，可提供非常快的表面固化速度，克服缺氧问题 | |
| Doublecure® 73W | Double Bond Chemical Ind., Co., Ltd. | 水溶性不黄变光引发剂。它的良好的溶解力和水溶性，使其非常适合用于制备光引发剂混合物或水性紫外光固化体系。它是木器、金属和塑料用涂料以及紫外光固化胶粘剂的可选引发剂 | |
| Doublecure® 784 | Double Bond Chemical Ind., Co., Ltd. | Doublecure® 369 is a highly efficient Free Radical Type I solid photoinitiator for UV-polymerization of chemically prepolymers in combination with mono-or multifunctional monomers. This pale yellow powder may be used after adequate testing alone or in com...展开 Doublecure® 369 is a highly efficient Free Radical Type I solid photoinitiator for UV-polymerization of chemically prepolymers in combination with mono-or multifunctional monomers. This pale yellow powder may be used after adequate testing alone or in combination with suitable coinitiators, e.g., Doublecure® 184, for UV curable inks and varnishes for applications on paper, metal and plastic materials. Its high absorptivity makes it especially suitable for pigmented UV-curable systems, photo resists and printing plates. 收起 | |
| Doublecure® BDK | Double Bond Chemical Ind., Co., Ltd. | 高性能光引发剂，适合固有黄变不重要的应用场合。高感光速度结合改善的保存期限使其成为许多应用，包括木器、金属、塑料和光刻胶干膜用涂料，的可选引发剂 | |
| Doublecure® BMS | Double Bond Chemical Ind., Co., Ltd. | 高性能光引发剂，可结合DOUBLECURE® EPD光催化剂，用于紫外光固化的涂料配方。它的白色外观和在UVB区的强吸收使它适用于白色或有色紫外光涂料。相比其它具有相同吸收区域的光敏剂，低气味和良好的单体溶解性是它的两大优势 | |
| Doublecure® BP | Double Bond Chemical Ind., Co., Ltd. | 一种高效的光引发剂，经UV照射，可与胺增效剂如Doublecure ® 115反应产生自由基，该自由基可引发UV辐射固化体系发生聚合。 | |
| Doublecure® CA | Double Bond Chemical Ind., Co., Ltd. | 固体不黄变光引发剂增效剂。它可提供快速表面固化性能，杰出的表面硬度和无气味特征 | |
| Doublecure® CQ | Double Bond Chemical Ind., Co., Ltd. | 固体不黄变光引发剂。它可提供快速固化性能 | |
| Doublecure® EMK | Double Bond Chemical Ind., Co., Ltd. | 该产品既是一种芳族酮，又是一种叔胺。既能用作光敏剂，又能用作胺增效剂，可作为独立完成的引发体系。Doublecure® ® EMK能强力吸收处于350-400nm区域的紫外线，很适合用于有色和黑色UV涂料。 | |
| Doublecure® EPD | Double Bond Chemical Ind., Co., Ltd. | 一种高效胺增效剂，常用作紫外线照射固化涂料的光敏剂。该光敏剂常结合其它产品使用，包括Doublecure ® ITX和MP-L。 | |
| Doublecure® IPK | Double Bond Chemical Ind., Co., Ltd. | 一种高效的光敏剂，常用作紫外线照射固化涂料的光引发剂。该光引发剂常用于结合其它产品使用，如DOUBLECURE® 107, OMB and MP-L. | |
| Doublecure® LBP | Double Bond Chemical Ind., Co., Ltd. | 一种高效的液态光引发剂，经UV照射后与胺增效剂如DOUBLECURE® 115, 225反应产生自由基，该自由基可引发UV辐射固化体系发生聚合。 | |
| Doublecure® LED385 | Double Bond Chemical Ind., Co., Ltd. | Doublecure® LED385 is a photoinitiator specially designed for LED ink application at 385nm wavelength. Compared to TPO or 819, a lower dosage of Doublecure® LED385 can achieve better surface cure and solvent resistance. | |
| Doublecure® OMB | Double Bond Chemical Ind., Co., Ltd. | 一种高效的光引发剂，特别开发用于要求无气味和不黄变的应用场合，如食品包装涂料。该产品与如Doublecure ® 115这种光催化剂结合效果可比拟其它的苯甲酮类引发剂。 | |
| Doublecure® OPD | Double Bond Chemical Ind., Co., Ltd. | 一种高效胺增效剂，常用作紫外线照射固化涂料的光敏剂。该光敏剂常结合其它产品使用，包括Doublecure ® ITX和EMK。 | |
| Doublecure® PI-172 | Double Bond Chemical Ind., Co., Ltd. | 高性能光引发剂，可用于丙烯酸酯单体、甲基丙烯酸酯单体、丙烯酸、丙烯腈、苯乙烯单体和丁二烯 | |
| Doublecure® TPO | Double Bond Chemical Ind., Co., Ltd. | 可用于有色体系，不牺牲反应活性。因其空前的速度和不黄变性能，该产品是厚膜和白色涂料的最佳推荐。 | |
| Doublecure® TPO-L | Double Bond Chemical Ind., Co., Ltd. | 位于379nm最大波长处有少量吸收，可用于有色体系，且不会影响反应活性。同时，因其杰出的反应速度和不黄变性能，该产品推荐用于厚膜和白色涂料。 | |
| EBECRYL® P115 | Allnex | EBECRYL® P115 is a copolymerizable amine used as a hydrogen donor, or photoactivator, in ultraviolet light (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. ADDITOL® BP), EBECRYL® P115 provides rapid UV ...展开 EBECRYL® P115 is a copolymerizable amine used as a hydrogen donor, or photoactivator, in ultraviolet light (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. ADDITOL® BP), EBECRYL® P115 provides rapid UV cure response in air by mitigating the effects of oxygen inhibition at the coating or ink surface. It has recommended levels are from 5 to 15% based on the total formulation, usually combined with 3-5% photosensitizer. EBECRYL® P115 is recommended as a reactive co-initiator in the following applications: overprint varnishes, screen and flexo inks, wood topcoats, clear coatings on paper and plastics, and pigmented coatings. 收起 | Request Sample |
| EBECRYL® P39 | Allnex | EBECRYL® P39 is a polymeric benzophenone derivative diluted with 25% of EBECRYL® LEO 10501 that functions as the photosensitizer in hydrogen abstraction type radical photoinitiator systems. EBECRYL® P39 has been designed for use in the formulation of UV c...展开 EBECRYL® P39 is a polymeric benzophenone derivative diluted with 25% of EBECRYL® LEO 10501 that functions as the photosensitizer in hydrogen abstraction type radical photoinitiator systems. EBECRYL® P39 has been designed for use in the formulation of UV coatings that exhibit little or no odor after curing. It has recommended levels are from 8 to 10% based on total formulation. It should be used in combination with amine co-initiators such as EBECRYL® P115 or EBECRYL® 7100. EBECRYL® P39 is recommended for use in over print varnishes where low residual odor is required. 收起 | Request Sample |
| GENOCURE* BAPO | Rahn USA Corp. | 量为GENOCURE BAPO在色浆中通常使用0.1 to 1.5%。在白色油墨和涂料中，常结合GENOCURE CPK一起使用 | Request Sample |
| GENOCURE* BDK | Rahn USA Corp. | 安息香双甲醚，用于UV固化油墨、涂料和粘胶的光引发剂。 | Request Sample |
| GENOCURE* BDMM | Rahn USA Corp. | 芳香族酮。Norrish I类光引发剂，适用于UV固化油墨、涂料和胶粘剂。它特别适合有色UV油墨应用 | Request Sample |
| GENOCURE* BMS | Rahn USA Corp. | GENOCURE* BMS is 4-Tolylthiobenzophenone. Norrish Type II Photoinitiator for UV-curable inks, coatings and adhesives. It has high reactivity, low odor, and is insoluble in water. Recommended for use with GENOCURE* ITX and e.g. GENOCURE* ABD for pigmented ...展开 GENOCURE* BMS is 4-Tolylthiobenzophenone. Norrish Type II Photoinitiator for UV-curable inks, coatings and adhesives. It has high reactivity, low odor, and is insoluble in water. Recommended for use with GENOCURE* ITX and e.g. GENOCURE* ABD for pigmented systems. 收起 | Request Sample |
| GENOCURE* BP | Rahn USA Corp. | 芳族酮。用于UV固化油墨、涂料和粘胶的光引发剂。 | Request Sample |
| GENOCURE* CPK | Rahn USA Corp. | 芳族酮。用于UV固化油墨、涂料和粘胶的光引发剂。 | Request Sample |
| GENOCURE* CQ | Rahn USA Corp. | 高纯度樟脑醌，对470nm左右光谱波段吸收最大。用作UV固化油墨、涂料和粘胶的光引发剂。 | Request Sample |
| GENOCURE* DEAP | Rahn USA Corp. | GENOCURE* DEAP is an aromatic ketone used as a photoinitiator for UV-curable inks, coatings, and adhesives. It is non-yellowing, has good stability, and through cure. This product is recommended for a variety of applications, including water dilutable coa...展开 GENOCURE* DEAP is an aromatic ketone used as a photoinitiator for UV-curable inks, coatings, and adhesives. It is non-yellowing, has good stability, and through cure. This product is recommended for a variety of applications, including water dilutable coatings, laminating adhesives, printing inks and varnishes for plastic foils, and wood, plastic, and paper coatings. 收起 | Request Sample |
| GENOCURE* DETX | Rahn USA Corp. | 噻吨酮。用于UV固化油墨、涂料和粘胶的光引发剂。 | Request Sample |
| GENOCURE* DMHA | Rahn USA Corp. | 芳族酮。用于UV固化油墨、涂料和粘胶的光引发剂。 | Request Sample |
| GENOCURE* EHA | Rahn USA Corp. | 氨基苯。用于UV固化油墨、涂料和粘胶的增效剂。 | Request Sample |
| GENOCURE* EPD | Rahn USA Corp. | 氨基苯。用于UV固化油墨、涂料和粘胶的增效剂。 | Request Sample |
| GENOCURE* ITX | Rahn USA Corp. | 噻吨酮。用于UV固化油墨、涂料和粘胶的光引发剂。 | Request Sample |
| GENOCURE* LBC | Rahn USA Corp. | 液态混合光引发剂。用作UV固化油墨、涂料和粘胶的光引发剂。 | Request Sample |
| GENOCURE* LBP | Rahn USA Corp. | 芳族酮。用于UV固化油墨、涂料和粘胶的光引发剂。 | Request Sample |
| GENOCURE* LTD | Rahn USA Corp. | GENOCURE* LTD是一种TPO/DMHA 1：1混合的有液体性质的混合物。它有优良的反应性，溶解性，和良好的表面/固化特点。 该产品用于抑黄清漆涂层，白色颜料和胶粘剂应用。 | Request Sample |
| GENOCURE* LTM | Rahn USA Corp. | 液态混合光引发剂。用作UV固化油墨、涂料和粘胶的光引发剂。 | Request Sample |
| GENOCURE* MBB | Rahn USA Corp. | 芳族酮。用于UV固化油墨、涂料和粘胶的光引发剂。 | Request Sample |
| GENOCURE* MBF | Rahn USA Corp. | 芳族酮。用于UV固化油墨、涂料和粘胶的光引发剂。 | Request Sample |
| GENOCURE* MDEA | Rahn USA Corp. | 脂肪族胺。用于UV固化油墨、涂料和粘胶的增效剂。 | Request Sample |
| GENOCURE* PBZ | Rahn USA Corp. | 4-苯基二苯甲酮。用于UV固化油墨、涂料和粘胶的光引发剂。 | Request Sample |
| GENOCURE* PMP | Rahn USA Corp. | 芳族酮。用于UV固化油墨、涂料和粘胶的光引发剂。 | Request Sample |
| GENOCURE* TPO | Rahn USA Corp. | 二苯基氧化磷，UV固化油墨、涂料和粘胶的光引发剂。 | Request Sample |
| GENOCURE* TPO-L | Rahn USA Corp. | 磷化氢氧化物，液体光引发剂，适合UV固化油墨、涂料和胶粘剂 | Request Sample |
| GENOPOL* AB-2 | Rahn USA Corp. | GENOPOL AP-2是一种多官能团氨基安息香酸盐衍生物，设计用于UV固化油墨、涂料和粘结剂，具有低迁移性和低气味。GENOPOL AP-2能用作标准氨基安息香酸盐的替代物 | Request Sample |
| GENOPOL* BP-2 | Rahn USA Corp. | GENOPOL BP-2是一种多官能团苯甲酮衍生物，设计用于UV固化油墨、涂料和粘结剂，具有低迁移性和低气味。GENOPOL BP-2能用作苯甲酮及其衍生物的替代物 | Request Sample |
| GENOPOL* TX-2 | Rahn USA Corp. | 多官能噻吨酮衍生物，用于UV固化油墨、涂料和粘胶，满足低迁移和低气味的要求。 | Request Sample |
| GR-1173 | Hubei Gurun Technology Co., Ltd. | GR-1173 is a yellowish liquid photoinitiator with high-efficiency and anti-yellowing. This product is commonly applied to overprint varnish and coatings for wood, plastics and metal. | |
| GR-184 | Hubei Gurun Technology Co., Ltd. | GR-184 is a white powder with strong thermal stability and anti-yellowing photoinitiator. This product is commonly used in overprint varnish and coatings for wood, plastics and metal. | |
| GR-369 | Hubei Gurun Technology Co., Ltd. | GR-369 is a yellowish powder and photoinitiator that contains quick photocuring and high sensitivity. This product has applications offset inks, screen inks, flexo inks and inkjet inks. | |
| GR-907 | Hubei Gurun Technology Co., Ltd. | GR-907 is a white powder and a photoinitiator with quick photocuring speed, high sensitivity and low odor. This product can be applied to offset inks, screen inks, flexo inks and inkjet inks. | |
| GR-FMT | Hubei Gurun Technology Co., Ltd. | GR-FMT is an orange powder and a photoinitiator with high sensitivity used for curing of thick layers, including layers thicker than 70 µm, and dark photocuring coatings. This product's absorption wavelength can reach 560 nm and can also be used for UV c...展开 GR-FMT is an orange powder and a photoinitiator with high sensitivity used for curing of thick layers, including layers thicker than 70 µm, and dark photocuring coatings. This product's absorption wavelength can reach 560 nm and can also be used for UV coating, printing ink and adhesive. 收起 | |
| GR-ITX | Hubei Gurun Technology Co., Ltd. | GR-ITX is a yellowish powder and photoinitiator that contains quick photocuring and photoinitiating. This product is for use in clear and colorful UV coating or ink, offset inks, screen inks, flexo inks and inkjet inks. | |
| GR-PAG-2 | Hubei Gurun Technology Co., Ltd. | GR-PAG-2 is a yellow brown powder and a cationic type photoinitiator with strong thermal stability, high solubility and light controllability. This product is used in cationic photocuring and chemical acid agile amplification imagery systems. | |
| GR-PS-1 | Hubei Gurun Technology Co., Ltd. | GR-PS-1 is a yellow crystal powder and a photosensitizer with strong thermal stability, photoinitiating and sensitivity promotion. This product is used to promote UV coating and applied to high sensitive printing plate photosensitive coating, negative pho...展开 GR-PS-1 is a yellow crystal powder and a photosensitizer with strong thermal stability, photoinitiating and sensitivity promotion. This product is used to promote UV coating and applied to high sensitive printing plate photosensitive coating, negative photoresist and other sensitive material. 收起 | |
| GR-TPO | Hubei Gurun Technology Co., Ltd. | GR-TPO is a yellowish powder used as a photoinitiator. This product has quick photocuring speed, can be applied to thick layers of photocuring coatings, contain low-volatility, low odor and anti-yellowing. | |
| GR-XBPO | Hubei Gurun Technology Co., Ltd. | GR-XBPO is a yellowish powder and a photoinitiator good for thick layers of photocuring coatings with anti-yellowing, low-volatility, low odor and good solubility. This product's absorption wavelength can reach 450 nm and can also be used for resistant UV...展开 GR-XBPO is a yellowish powder and a photoinitiator good for thick layers of photocuring coatings with anti-yellowing, low-volatility, low odor and good solubility. This product's absorption wavelength can reach 450 nm and can also be used for resistant UV varnish, many coatings, adhesive, offset printing ink, screen printing ink and flexo ink. 收起 | |
| Hycure 1173 | ChemFine International Co., Ltd. | Hycure 1173, also known as 2-Hydroxy-2-Methyl-1-Phenylpropan, is a photoinitiator for ultraviolet solidify systems that can extend the storeable time and keep it from turning yellow for a long time. | |
| Hycure 184 | ChemFine International Co., Ltd. | Hycure 184, also known as 1-Hydroxycyclohexyl Phenyl Ketone, is a photoinitiator used for ultraviolet solidify systems that can extend its store-able time and keep it from turning yellow for a long time. | |
| Hycure 907 | ChemFine International Co., Ltd. | Hycure 907, also known as 2-Methy-1-[4-(methylthio)-Phenyl]-2-Morpholinopropan-1-One, is a high performance photoinitiator and is used for ultraviolet solidify systems, extending its store-able time and keeping it from turning yellow for a long time. | |
| Hycure BDK | ChemFine International Co., Ltd. | Hycure BDK, also known as 2,2-Dimethoxy- 2-Phenylacetophenone, is a photoinitiator that is mainly used as the light curing agent for ultraviolet curing systems, metal paints, paper paints, and is applied to printing ink. | |
| Hycure Benzil | ChemFine International Co., Ltd. | Hycure Benzil, also known as Bibenzoyl, is a photoinitiator used as the raw material for certain medicines, an intermediary for organic synthesis, is an ultraviolet hardening agent and a pesticide. | |
| Hycure Benzoin | ChemFine International Co., Ltd. | Hycure Benzoin, also known as 2-diphenyl ethanone, is used as a photoinitiator in regards to photo-curable coatings also as an antiseptic in the pharmaceutical industry. | |
| Hycure ITX | ChemFine International Co., Ltd. | Hycure ITX, also known as Isopropyl thioxanthone, has applications in color or transparent UV-photocurable ink, binder, and paint. | |
| PolyQ® 102 | Double Bond Chemical Ind., Co., Ltd. | PolyQ® 102是一种高效反应性光引发剂，适合需要无色和不迁移性能的应用，例如食品包装涂料。它可结合其它光激活剂，例如Doublecure® 115，可提供与其它苯甲酮类引发剂一样的性能。该产品是一种苯甲酮衍生物齐聚物。它在室温下是一种结晶性半固体 | |
| SBPF-022 | DKSH | SBPF-022 is a low volatile, low irritation and fast curing monomer for use in free radical polymerization. | Request Sample |
| SEA-187 | DKSH | SEA-187 is the diacrylate ester of bisphenol A epoxy resin, which provides fast cure response when exposed to ultraviolet light (UV). SEA-187 finds broad use in UV/EB applications, such as inks, coatings and overprint varnishes. | Request Sample |
| SEA-4125 | DKSH | SEA-4125 is a modified epoxy acrylate is good flexibility acrylate oligomer which provides fast cure response when exposed to ultraviolet light (UV). Its chemical composition is di-functional epoxy acrylate. | Request Sample |
| SEA-450M40 | DKSH | SEA-450M40 is a difunctional BPA type epoxy acrylate. This product is characterized by its excellent mechanical strength, adhesive strength and chemical resistance. SEA-450M40 provides fast cure response when exposed to ultraviolet light (UV). | Request Sample |
| SEA-650 | DKSH | SEA-650 , BPS epoxy acrylate , is high refractive index acrylate oligomer which provides fast cure response when exposed to ultraviolet light(UV). Its chemical composition is 2 functional BPS epoxy acrylate. | Request Sample |
| SEA-700BA20 | DKSH | SEA-700BA20 is a fluorene epoxy acrylate, is high refractive index acrylate oligomer which provides fast cure response when exposed to ultraviolet light (UV). Its chemical composition sis fluorene epoxy acrylate / benzyl acrylate. | Request Sample |
| SEA-820 | DKSH | SEA-820 biphenyl novolac epoxy acrylate, is high refractive index acrylate oligomer which provides fast cure response when exposed to ultraviolet light (UV). Biphenyl novolac epoxy acrylate / acrylate monomer OPP(EO) A 20%. | Request Sample |
| SEA-A130H | DKSH | SEA-A130H is bisphenol A based epoxy acrylate oligomer for uv dual curable hybrid curable systems such as thermal (with epoxy hardeners) as well as energy curing process based on individual curing process with thermal cure and energy cure, it leads to hig...展开 SEA-A130H is bisphenol A based epoxy acrylate oligomer for uv dual curable hybrid curable systems such as thermal (with epoxy hardeners) as well as energy curing process based on individual curing process with thermal cure and energy cure, it leads to higher adhesion strength and mechanical strength to various substrates. 收起 | Request Sample |
| SEA-A150H | DKSH | SEA-A150H is bisphenol A based epoxy acrylate oligomer for uv dual curable hybrid curable systems such as thermal (with epoxy hardeners) as well as energy curing process based on individual curing process with thermal cure and energy cure, it leads to hig...展开 SEA-A150H is bisphenol A based epoxy acrylate oligomer for uv dual curable hybrid curable systems such as thermal (with epoxy hardeners) as well as energy curing process based on individual curing process with thermal cure and energy cure, it leads to higher adhesion strength and mechanical strength to various substrates. 收起 | Request Sample |
| SEA-A170H | DKSH | SEA-A170H is bisphenol A based epoxy acrylate oligomer for uv dual curable hybrid curable systems such as thermal (with epoxy hardeners) as well as energy curing process based on individual curing process with thermal cure and energy cure, it leads to hig...展开 SEA-A170H is bisphenol A based epoxy acrylate oligomer for uv dual curable hybrid curable systems such as thermal (with epoxy hardeners) as well as energy curing process based on individual curing process with thermal cure and energy cure, it leads to higher adhesion strength and mechanical strength to various substrates. 收起 | Request Sample |
