| Surfadol® 331 Pigment Dispersing Agent | ACME | Surfadol 331用于水性系统。可降低动态表面张力，并可提高多种颜料和底材的湿润度。 | |
| Surfadol® 333 Pigment Dispersing Agent | ACME | Surfadol 333用于水性系统。可降低动态表面张力，并可提高多种颜料和底材的湿润度。 | |
| Surfadol® 333W Pigment Dispersing Agent | ACME | Surfadol® 333W is a 100% active nonionic wetting and dispersing agent for water based pigments. It can improves wetting, dispersing performance and stability for a variety of pigments. HLB value is 11-20. Silicone free, APEO free, solvent-free. | |
| Surfadol® 336 | ACME | Surfadol 336用于水性系统。可降低动态表面张力，并可提高多种颜料和底材的湿润度。 | |
| Surfadol® 338 | ACME | Surfadol 338用于水性系统。可降低动态表面张力，并可提高多种颜料和底材的湿润度。 | |
| Surfadol® 420 (2,4,7,9-Tetramethyl-5-decyne-4,7-diol ethoxylate) | ACME | 一种乙氧化润湿剂和分子消泡剂（100%活性液体；HLB：4）。性能类似于Surfadol 541，在水性涂料、油墨和胶粘剂体系中具有改善的操作性 | |
| Surfadol® 440 Surfactant | ACME | 一种乙氧化低起泡润湿剂（100%活性液体；HLB：8）。Surfadol 440表面活性剂可提供低泡沫动态和静态表面张力下降，具有改善的分散性，易添加用于水性涂料、油墨和胶粘剂体系 | |
| Surfadol® 465 Surfactant | ACME | 一种乙氧化低起泡润湿剂（100%活性液体；HLB：13）。Surfadol 465是一种乙氧化炔属二醇，可提供低起泡性，降低表面张力并提高在水性涂料、油墨和胶粘剂体系中的溶解性和相容性 | |
| Surfadol® 485 Surfactant | ACME | Surfadol 485是一种非离子型炔二醇改性表面活性剂。它专门设计用于水基系统，并能够有效降低表面张力。这款产品可以提高各种基材和颜料的润湿性，且非常适合研磨阶段使用。Surfadol 485不含硅，无溶剂，推荐用于打印油墨，柔版和凹版油墨，润版液，压敏粘合剂等。 | |
| Surfadol 485W Surfactant | ACME | Surfadol 485W Surfactant is a nonionic low-foam dynamic wetting agent. It is specifically for water-based systems and improves wetting of various substrates and pigments. | |
| Surfadol® 518 | ACME | Surfadol 518具有出色的控制泡沫性能。不会产生不相容问题。对所应用的产品性能无不良影响。 | |
| Surfadol® 520 | ACME | Surfadol 520是一种澄清黄色特体，用于涂料，粘合剂，乳胶浸渍，染料及颜料合成以及清洁产品 | |
| Surfadol® 532 | ACME | Surfadol 532是一种澄清黄色特体，用于涂料，粘合剂，乳胶浸渍，染料及颜料合成以及清洁产品 | |
| Surfadol® 532B | ACME | Surfadol 532B是一种非离子消泡剂（32%活性成分）。它可以有效的在水基油漆和涂料中打破气泡和微气泡。这款产品不含有机硅和APEO。 | |
| Surfadol® 541 (2,4,7,9-Tetramethyl-5-decyne-4,7-diol, TMDD) | ACME | 炔属二醇表面活性剂，具有多种优点，包括润湿和泡沫控制，适用于水性体系。100%活性固体 | |
| Surfadol® 541A Surfactant | ACME | 炔属二醇表面活性剂，具有多种优点，包括润湿和泡沫控制，适用于水性体系。50%活性液体，2-乙基己醇稀释 | |
| Surfadol® 541BC Surfactant | ACME | 炔属二醇表面活性剂，具有多种优点，包括润湿和泡沫控制，适用于水性体系。50%活性液体，2-丁氧基乙醇稀释 | |
| Surfadol® 541DPM Surfactant | ACME | 炔属二醇表面活性剂，具有多种优点，包括润湿和泡沫控制，适用于水性体系。50%活性液体，二丙二醇单甲醚稀释 | |
| Surfadol® 541E Surfactant | ACME | 炔属二醇表面活性剂，具有多种优点，包括润湿和泡沫控制，适用于水性体系。50%活性液体，乙二醇稀释 | |
| Surfadol® 541H Surfactant | ACME | 炔属二醇表面活性剂，具有多种优点，包括润湿和泡沫控制，适用于水性体系。75%活性液体，乙二醇稀释 | |
| Surfadol® 541PA Surfactant | ACME | 炔属二醇表面活性剂，具有多种优点，包括润湿和泡沫控制，适用于水性体系。50%活性液体，异丙醇稀释 | |
| Surfadol® 541PG Surfactant | ACME | 炔属二醇表面活性剂，具有多种优点，包括润湿和泡沫控制，适用于水性体系。50%活性液体，丙二醇稀释 | |
| Surfadol® 541S Surfactant | ACME | Surfadol® 541S is a free-flowing white powder amorphous silica with a menthol odor. It effectively reduces the surface tension, foam control, and promotes leveling to maintain stable viscosity. It is for non-water, non-solvent based coatings and other sys...展开 Surfadol® 541S is a free-flowing white powder amorphous silica with a menthol odor. It effectively reduces the surface tension, foam control, and promotes leveling to maintain stable viscosity. It is for non-water, non-solvent based coatings and other systems. Surfadol® 541S is without APEO and non-toxic. 收起 | |
| Surfadol® 550 | ACME | Surfadol 550是一种炔二醇表面活性剂。它可以有效地打破气泡和微泡，并提供卓越持久的泡沫控制，且对应用程序的性能无不良影响。它可以在水/乙醇系统以及以溶剂为基础的系统中使用。这款产品推荐用于涂料，粘合剂，乳胶浸渍，染料和合成颜料，以及清洁产品中。Surfadol 550的密度为0.925-0.935g/cm^3。 | |
| Surfadol® 550P | ACME | Surfadol 550P是一款50%活性物的非离子消泡剂。它在水基油漆和涂料中提供有效和持久的泡沫控制。这款产品不含有机硅和APEO。 | |
| Tytan AP20 (Titanate Adhesion Promoter) | Borica Co., Ltd. | Tytan AP20 is primarily designed to strongly increase adhesion of solvent based inks/coatings to a variety of plastics used for food packaging or other purposes. It also improves pigment distribution and heat sealing resistance, allowing perfect hiding po...展开 Tytan AP20 is primarily designed to strongly increase adhesion of solvent based inks/coatings to a variety of plastics used for food packaging or other purposes. It also improves pigment distribution and heat sealing resistance, allowing perfect hiding power and appearance of printing on otherwise problematic substrates. 收起 | |
| Tytan AQ33 (Water-borne Titanate Adhesion Promoter) | Borica Co., Ltd. | Tytan AQ33 can be used as an adhesion promoter or cross linking agent. It is recommended for water-borne coatings in base environments on various surfaces. | |
| Tytan AQ5000 (Water-borne Titanate Adhesion Promoter) | Borica Co., Ltd. | Tytan AQ5000 is used as an advanced polyesterification and transesterification catalyst based on the latest titanate technology. This product is recommended for the manufacture of unsaturated polyester, polyester, PET, PTT, and PBT without sacrificing the...展开 Tytan AQ5000 is used as an advanced polyesterification and transesterification catalyst based on the latest titanate technology. This product is recommended for the manufacture of unsaturated polyester, polyester, PET, PTT, and PBT without sacrificing the performance when the water content is increased in the system. Tytan AQ5000 can be used as an adhesion promoter or cross linking agent for water-borne coatings in acid environments on various surfaces. 收起 | |
| Tytan AQZ30 (Zirconate Crosslinker) | Borica Co., Ltd. | Tytan AQZ30 has the ability to work as adhesion promoter and crosslinking agent. This product is recommended for water-borne and solvent-borne inks. | |
| Tytan BIP15 (Titanate Mixture) | Borica Co., Ltd. | Tytan BIP15 is a mixture of tetra isopropyl titanate and tetra n-butyl titanate at 85-15 ratio. It works as adhesion promoter, crosslinking agent for hydroxylic compounds and as a component of heat and corrosion resistant paints. | |
| Tytan CP-219 (Titanate Coupling Agent) | Borica Co., Ltd. | Tytan CP-219 can enhance the dispersion of inorganic fillers/pigment such as calcium carbonate, titanium dioxide, carbon black in organic system. It can increase filler/pigment loading to reduce overall cost while maintaining the property. | |
| Tytan CP-317 (Titanate Coupling Agent) | Borica Co., Ltd. | Tytan CP-317 can enhance the dispersion of inorganic fillers/pigment such as calcium carbonate, titanium dioxide, and carbon black in an organic system. It can increase filler/pigment loading to reduce overall cost while maintaining the mechanical propert...展开 Tytan CP-317 can enhance the dispersion of inorganic fillers/pigment such as calcium carbonate, titanium dioxide, and carbon black in an organic system. It can increase filler/pigment loading to reduce overall cost while maintaining the mechanical property. 收起 | |
| Tytan CP-318 (Titanate Coupling Agent) | Borica Co., Ltd. | Tytan CP-318 is a solid material and can enhance the dispersion of inorganic fillers/pigment such as calcium carbonate, titanium dioxide, and carbon black in organic system. It can increase filler/pigment loading to reduce overall cost while maintaining t...展开 Tytan CP-318 is a solid material and can enhance the dispersion of inorganic fillers/pigment such as calcium carbonate, titanium dioxide, and carbon black in organic system. It can increase filler/pigment loading to reduce overall cost while maintaining the property. 收起 | |
| Tytan CP-326 (Titanate Coupling Agent) | Borica Co., Ltd. | Tytan CP-326 can enhance the dispersion of inorganic fillers/pigment such as calcium carbonate, titanium dioxide, carbon black in organic system. It can increase filler/pigment loading to reduce overall cost while maintaining the property. | |
| Tytan CX100 (Titanate Rheology Modifier) | Borica Co., Ltd. | Tytan CX100 is developed as a rheology modifier for emulsion paints. It reacts with colloid stabilized binders to impart a thixotropic structure to the paint through shear sensitive hydrogen bonding. | |
| Tytan CX200 (Titanate Rheology Modifier) | Borica Co., Ltd. | Tytan CX200 is developed as a rheology modifier for emulsion paints. It reacts with colloid stabilized binders to impart a thixotropic structure to the paint through shear sensitive hydrogen bonding. | |
| Tytan CX400 (Titanate Rheology Modifier) | Borica Co., Ltd. | Tytan CX400 is developed as a rheology modifier for emulsion paints. It reacts with colloid stabilized binders to impart a thixotropic structure to the paint through shear sensitive hydrogen bonding. | |
| Tytan EHT (Tetra 2-Ethylhexyl Titanate) | Borica Co., Ltd. | Tytan EHT is used in a variety of industrial applications as an adhesion promoter and as a crosslinking agent. It is commonly used for hydroxylic compounds and as a component of heat and corrosion resistant paints. | |
| Tytan ET (Tetra Ethyl Titanate) | Borica Co., Ltd. | Tytan ET is used in a variety of industrial applications as an adhesion promoter, as a crosslinking agent. It is commonly used for hydroxylic compounds and as a component of heat and corrosion resistant paints. | |
| Tytan PBT (Titanate Crosslinker) | Borica Co., Ltd. | Tytan PBT is largely used in formulating heat and corrosion resistant paints. It can be used with zinc or alumina pigments to formulate paints suitable for application by brush or spray. It can also be used to formulate air-drying paint with silicone resi...展开 Tytan PBT is largely used in formulating heat and corrosion resistant paints. It can be used with zinc or alumina pigments to formulate paints suitable for application by brush or spray. It can also be used to formulate air-drying paint with silicone resins. Paint containing Tytan PBT is moisture sensitive during manufacture and storage. The film dries through hydrolysis of PBT to a thin layer of Ti-O-Si and then bond to the substrate. Once the film dries, it can stand up to 600 oC. 收起 | |
| Tytan S2 (Titanate Silicone Crosslinking Agent) | Borica Co., Ltd. | Tytan S2 is used commonly as important additives in moisture curing room temperature vulcanizable (RTV) silicone sealant, catalyst for silane and silicone cross linking as well as moisture scavenger for sealant. It can also increase the curing rate of sil...展开 Tytan S2 is used commonly as important additives in moisture curing room temperature vulcanizable (RTV) silicone sealant, catalyst for silane and silicone cross linking as well as moisture scavenger for sealant. It can also increase the curing rate of silicone base ink. 收起 | |
| Tytan S22 (Titanate Silicone Crosslinking Agent) | Borica Co., Ltd. | Tytan S22 is commonly used as an important additive in moisture curing room temperature vulcanizable (RTV) silicone sealant, as a catalyst for silane and silicone cross linking, and as a moisture scavenger for sealants. It can also increase the curing rat...展开 Tytan S22 is commonly used as an important additive in moisture curing room temperature vulcanizable (RTV) silicone sealant, as a catalyst for silane and silicone cross linking, and as a moisture scavenger for sealants. It can also increase the curing rate of silicone base ink. 收起 | |
| Tytan S6 (Titanate Silicone Crosslinking Agent) | Borica Co., Ltd. | Tytan S6 is used commonly as an important additive in moisture curing room temperature vulcanizable (RTV) silicone sealant. It is also used as a catalyst for silane and silicone crosslinking, as well as moisture scavenging for sealants. It can also increa...展开 Tytan S6 is used commonly as an important additive in moisture curing room temperature vulcanizable (RTV) silicone sealant. It is also used as a catalyst for silane and silicone crosslinking, as well as moisture scavenging for sealants. It can also increase the curing rate of silicone base ink. 收起 | |
| Tytan TAA (Titanate Adhesion Promoter) | Borica Co., Ltd. | Tytan TAA is a titanium chelate of which the alkoxy groups can react with resins to promote adhesion and/or cross-linking while the chelating agents stabilize the molecule. Tytan TAA has an excellent balance between reactivity and cross-linking/adhesion-i...展开 Tytan TAA is a titanium chelate of which the alkoxy groups can react with resins to promote adhesion and/or cross-linking while the chelating agents stabilize the molecule. Tytan TAA has an excellent balance between reactivity and cross-linking/adhesion-improvement properties which makes it very suitable to strongly improve performance properties of industrial coatings on difficult modern polymeric substrates, glass and some metals. 收起 | |
| Tytan TET (Titanate Adhesion Promoter) | Borica Co., Ltd. | Tytan TET is a water soluble titanate which can be used in a variety of applications. For example, it can be used as a cross-linking agent in aqueous and non-aqueous paint and wire enamel; it can also function as an adhesion promoter in polyurethane syste...展开 Tytan TET is a water soluble titanate which can be used in a variety of applications. For example, it can be used as a cross-linking agent in aqueous and non-aqueous paint and wire enamel; it can also function as an adhesion promoter in polyurethane systems. 收起 | |
| Tytan TIPT (Tetra Isopropyl Titanate) | Borica Co., Ltd. | Tytan TIPT can be used as an adhesion promoting and cross-linking agent for hydroxylic compounds or heat and corrosion resistant coatings. It is most suitable for use in the glass and glass fiber manufacturing. | |
| Tytan TNBT (Tetra N-Butyl Titanate) | Borica Co., Ltd. | Tytan TNBT can be used as an adhesion promoting and cross-linking agent. It is recommended for hydroxylic compounds or heat and corrosion resistant coatings. | |
| Tytan TNBZ (Tetra N-Butyl Zirconate) | Borica Co., Ltd. | Tytan TNBZ is a very reactive primary zirconate that will hydrolyse immediately in contact with moisture. It is very suitable as an adhesion promoting and cross-linking agent for hydroxylic compounds or heat and corrosion resistant coatings. | |
| Tytan TNPT (Tetra N-Propyl Titanate) | Borica Co., Ltd. | Tytan TNPT can be used as an adhesion promoting and cross-linking agent. It is recommended for hydroxylic compounds or heat and corrosion resistant coatings. | |
| Tytan TNPZ (Tetra N-Propyl Zirconate) | Borica Co., Ltd. | Tytan TNPZ is a very reactive primary zirconate that will hydrolyse immediately in contact with moisture. It is very suitable as an adhesion promoting and cross-linking agent for hydroxylic compounds or heat and corrosion resistant coatings. | |
| Tytan X85 (Titanate Crosslinker) | Borica Co., Ltd. | Tytan X85 is used as a cross linking agent for hydroxylic compounds. It is also used as a component of heat and corrosion resistant paints. | |
| Automated Discharge Systems | Charles Ross & Son Company | 该Ross排水系统能消除浪费在刮檫来源于混合的重垢或粘性的物质的时间。加装了简捷按钮后，该设施可以在几分钟内将1000加仑每批次的废水装进散装箱内，灌装箱内或者包装设备内，一个挤压机或者两到三个辊压机。 |  |
| Double Planetary Mixer | Charles Ross & Son Company | Ross 60多年以前就已倡导并设计了双重行星式混合器。通过不断的升级改造，这种混合器能够用于粘度高达7,000,000厘泊的产品。并可以根据要求，设计更高速度的混合器。 |  |
| High Shear Mixer | Charles Ross & Son Company | 所有的转子/定子都是由一个固定在定子上的高速转子组成的。在一个单元中，转子包括单独的四片叶子。当旋转叶片通过每一个开着的定子的时候，他们机械的剪切微粒或液滴，在高速下将物质驱开到周围的混合器中，带来极大的压力。 |  |
| High Speed Disperser | Charles Ross & Son Company | ROSS 高速分散机以其耐用、分散速度快和维护成本低的特点成为行业标杆。标准配置包括：防爆装置，变频重型电动机，重型三角皮带传动器和轴承，安全开关，一个带手/足控制的气/油液压升降机，以及不锈钢接液部件和轴承防护罩。设备大小从1/2HP到200HP不等，处理能力分别达到1-200加仑。并可根据客户需求定制。 |  |
| Multi-Shaft Mixer | Charles Ross & Son Company | 我们提供双轴和三轴搅拌机以满足您的特定工艺需求。其中经济型的双轴搅拌机包括一个常规高速分散头和一个双翼锚式搅拌桨。这样的构造适用于简单的分散和搅拌。 |  |
| Planetary Dispersers | Charles Ross & Son Company | 一款结合了行星式叶片和高速分散叶片的专利行星式分散器。行星式和高速分散叶片既绕轴旋转，也绕容器不断旋转。 行星式叶片可将物料直接送入高速轨道分散器的高剪切区。 这种独特的搅拌组合，可以淘汰对于多重搅拌器的需要，即一台机器，两种技术。 |  |
| Powder Induction | Charles Ross & Son Company | 所有的转子/定子都是由一个固定在定子上的高速转子组成的。在一个单元中，转子包括单独的四片叶子。当旋转叶片通过每一个开着的定子的时候，他们机械的剪切微粒或液滴，在高速下将物质驱开到周围的混合器中，带来极大的压力。 |  |
| PreMax | Charles Ross & Son Company | 这种单极转子/定子发电机是在间隙式搅拌设备中产生高剪切和蓬勃流的理想之选。Ross PreMax 采用这种Delta转子/定子，能够制造一种机械，液压与气穴剪切的强力结合，从而 产生强劲的松团作用，特别适合颜料的分散。 |  |
| Ribbon Blender | Charles Ross & Son Company | Ribbon 混合器非常适用于粉类产品的混合。双向的ribbon搅拌器可在很短的时间内带来极致的混合。Ross可提供1-100立方英尺的工作量的Ribbon搅拌器。 |  |
| Sanitary Mixers | Charles Ross & Son Company | Ross公司几乎服务于全球每一工业化国家的食品，化妆品和药物领域。我们有着其它特种混合设备制造商难以企及的丰富经验和产能。 |  |
| Static/Motionless Mixers | Charles Ross & Son Company | RossLPD/LLPD(低压降）和ISG（界面表面发生器）静态混合器由于在湍流和层流混合应用领域的广泛使用而闻名。 |  |
| Systems And Controls | Charles Ross & Son Company | Ross 系统和控制（SynCon）是全球领先的控制系统供应商。我们供应从简单的开/关切换，到精细的基于菜单系统的PLC程序包。无论是标准或自定义，每一系统，都是专为满足客户具体需求而设。 |  |
| Three Roll Mill | Charles Ross & Son Company | 80多年前，ROSS创造出第一台三辊研磨机，带来革命性的颜料分散技术，使得分散料体的一致性和精细度达到前所未有的程度。如今，这种三辊研磨机依然是同类产品中的行业标杆，在诸如磁性涂料，化妆品，油漆，油墨和高品质陶瓷行业中有着广泛应用。 |  |
| Tumble Blenders | Charles Ross & Son Company | Ross 滚筒混合器具有大量的标准功能特点，包括：316-不锈钢双锥形设计，手动蝶阀设计达到放电 - 24”放电间隙，铰链式不锈钢加料口，内部表面进行了镜面抛光，外表面150磨砂处理，而对于非不锈钢组件，使用持久的双组分油漆涂装。 |  |
| Vertical Blender | Charles Ross & Son Company | 当你的产品对剪切敏感，或者工艺参数要求比较苛刻时，Ross 立式混合器是一款设计优越的替换方案。是那些要求最小混合影响产品的最佳选择。在同样的工作容积中，慢速旋转混合的动作要远比螺条混合器中的搅拌温和。 |  |
