E. GLYCOL ETHER DE | Brenntag North America | E. GLYCOL ETHER DE (Di ethylene glycol mono ethyl ether) is a colourless liquid with a pleasant mild odour. It is miscible in water and most of the organic solvents. It is ideal for use as a solvent for latex paints and wood stains, industrial cleaners. I...展开 E. GLYCOL ETHER DE (Di ethylene glycol mono ethyl ether) is a colourless liquid with a pleasant mild odour. It is miscible in water and most of the organic solvents. It is ideal for use as a solvent for latex paints and wood stains, industrial cleaners. It is also used in the textile industry as dye and ink carrier. 收起 | Request Sample |
E. GLYCOL ETHER DM | Brenntag North America | E. GLYCOL ETHER DM (E. glycol ether DM) is a very hydrophilic, slow-evaporating glycol ether. It is a colorless liquid with a mild, pleasant odor. It is miscible with water and most organic solvents. | Request Sample |
E. GLYCOL ETHER EB | Brenntag North America | E. GLYCOL ETHER EB (Ethylene glycol butyl ether) is a colourless liquid with a mild odour. It has a high dilution ratio with petroleum hydrocarbons. It is soluble in alcohol and water. It is ideal for use in a variety of solvents, varnishes and coatings. | Request Sample |
EPI-REZ™ Resin 7521-WH-57 | Brenntag North America | EPI-REZ™ Resin 7521-WH-57 is a 57% weight solids, non-ionic aqueous dispersion of a modified EPON™ Resin 1001 solid epoxy resin. This low VOC and HAPs-Free1 waterborne epoxy dispersion can be formulated into high-performance coatings for metal and concret...展开 EPI-REZ™ Resin 7521-WH-57 is a 57% weight solids, non-ionic aqueous dispersion of a modified EPON™ Resin 1001 solid epoxy resin. This low VOC and HAPs-Free1 waterborne epoxy dispersion can be formulated into high-performance coatings for metal and concrete substrates. EPIREZ™ Resin 7521-WH-57 exhibits good compatibility with many water-reducible amine curing agents and is designed for use with either EPIKURE™ Curing Agent 8530-W-75 or EPIKURE™ Curing Agent 6870-W-53. EPI-REZ Resin 7521-WH-57, when combined with EPIKURE™ 8530-W-75, provides a cost-effective, high-performance alternative to traditional waterborne epoxy coatings systems. This new system is called the NextGen Epoxy™ Waterborne System. 1 Hazardous air pollutants as defined by the US Environmental Protection Agency. 收起 | Request Sample |
EPI-REZ™ Resin 7720-W-50 | Brenntag North America | EPI-REZ Resin 7720-W-50 is a nonionic, waterborne epoxy dispersion based on a modified EPON™ Resin 1001-type solid epoxy resin. It is supplied in water at 50% solids by weight. This dispersion can be formulated to provide the performance of traditional so...展开 EPI-REZ Resin 7720-W-50 is a nonionic, waterborne epoxy dispersion based on a modified EPON™ Resin 1001-type solid epoxy resin. It is supplied in water at 50% solids by weight. This dispersion can be formulated to provide the performance of traditional solvent-based epoxy coatings at an ultra-low VOC (<50 g/L). EPI-REZ Resin 7720-W-50 may be used in non-HAP waterborne formulations for metal and concrete substrates. EPI-REZ Resin 7720-W-50 exhibits good compatibility with a water-reducible amine curing agents. A variety of EPIKURE™ curing agents may be used with EPI-REZ Resin 7720-W-50 (e.g., EPIKURE Curing Agent 6870-W-53 and EPIKURE Curing Agent 8530-W75). 收起 | Request Sample |
EPIKOTE™ Resin 235 | Brenntag North America | EPIKOTE™ Resin 235 is a low to medium viscosity epoxy resin consisting of a blend of Bisphenol A resin (produced from Bisphenol A and epichlorohydrin) and Bisphenol F resin (produced from Bisphenol F and epichlorohydrin). EPIKOTE Resin 235 contains no dil...展开 EPIKOTE™ Resin 235 is a low to medium viscosity epoxy resin consisting of a blend of Bisphenol A resin (produced from Bisphenol A and epichlorohydrin) and Bisphenol F resin (produced from Bisphenol F and epichlorohydrin). EPIKOTE Resin 235 contains no diluent. Its principal feature, as determined in laboratory tests is that it has excellent crystallization resistance during storage. Furthermore, the addition of reactive diluents, e.g., in the production of formulated compositions, has little to no adverse effect on crystallization resistance. EPIKOTE Resin 235 also provides good pigment-wetting and good resistance to filler settling. (Note: EPIKOTE Resin 235 is one product out of a series. There are other resin blends of similar type that offer the formulator a choice of starting viscosity). 收起 | Request Sample |
EPIKOTE™ Resin 240 | Brenntag North America | EPIKOTE™ Resin 240 is a lower viscosity epoxy resin based on a blend of a Bisphenol A resin (produced from Bisphenol A and epichlorohydrin) and a Bisphenol F resin (produced from Bisphenol F and epichlorohydrin), and containing an added proportion of mono...展开 EPIKOTE™ Resin 240 is a lower viscosity epoxy resin based on a blend of a Bisphenol A resin (produced from Bisphenol A and epichlorohydrin) and a Bisphenol F resin (produced from Bisphenol F and epichlorohydrin), and containing an added proportion of mono-epoxidized alcohol as a reactive diluent. The resin has lower volatility and lower odor factors which are responsible for its agreeable handling characteristics. EPIKOTE 240 has superior crystallization resistance during storage. 收起 | Request Sample |
EPIKURE™ Curing Agent 3115-U-80 | Brenntag North America | EPIKURE™ Curing Agent 3115-U-80 is a high molecular weight, reactive polyamide, high viscosity epoxy curing agent based on dimerized fatty acid and polyamines. For ease in formulating and handling, EPIKURE Curing Agent 3115 is also available in solutions ...展开 EPIKURE™ Curing Agent 3115-U-80 is a high molecular weight, reactive polyamide, high viscosity epoxy curing agent based on dimerized fatty acid and polyamines. For ease in formulating and handling, EPIKURE Curing Agent 3115 is also available in solutions of isopropyl alcohol at 73% solids, xylene at 70 solids, and Aromatic 100 at 80% solids. Other solutions may be made available upon request. 收起 | Request Sample |
EPIKURE™ Curing Agent 3125 | Brenntag North America | EPIKURE™ Curing Agent 3125 is a medium viscosity reactive polyamide curing agent, based ondimerized fatty acid and poly-amines. This is a general-purpose curing agent for epoxy resins that is suitable for many uses including solvent-borne coatings, pottin...展开 EPIKURE™ Curing Agent 3125 is a medium viscosity reactive polyamide curing agent, based ondimerized fatty acid and poly-amines. This is a general-purpose curing agent for epoxy resins that is suitable for many uses including solvent-borne coatings, potting, adhesives, caulks and 收起 | Request Sample |
EPIKURE™ Curing Agent 3393 | Brenntag North America | EPIKURE™ Curing Agent 3393 is a light color, low viscosity, modified cycloaliphatic amine curing agent. It has been specifically designed for use with EPON™ Resin 233 and can be used with standard liquid epoxy resins such as EPON Resin 828 or modified liq...展开 EPIKURE™ Curing Agent 3393 is a light color, low viscosity, modified cycloaliphatic amine curing agent. It has been specifically designed for use with EPON™ Resin 233 and can be used with standard liquid epoxy resins such as EPON Resin 828 or modified liquid epoxy resins such as EPON Resin 8132. 收起 | Request Sample |
EPIKURE™ Curing Agent 580 | Brenntag North America | EPIKURE™ Curing Agent 580 is a light color, lower viscosity, modified cycloaliphatic amine curing agent that does not contain intentionally-added benzyl alcohol or nonylphenol. Any potential free BPA content is less than 10 ppm. It can be used to develop ...展开 EPIKURE™ Curing Agent 580 is a light color, lower viscosity, modified cycloaliphatic amine curing agent that does not contain intentionally-added benzyl alcohol or nonylphenol. Any potential free BPA content is less than 10 ppm. It can be used to develop flooring formulations with lower indoor air emissions. 收起 | Request Sample |
EPIKURE™ Curing Agent 6870-W-53 | Brenntag North America | EPIKURE™ Curing Agent 6870-W-53 is a 53% solids, non-ionic aqueous dispersion of a modified polyamine adduct curing agent. This high molecular weight curing agent contains no solvents and is designed to provide the high performance of traditional epoxy co...展开 EPIKURE™ Curing Agent 6870-W-53 is a 53% solids, non-ionic aqueous dispersion of a modified polyamine adduct curing agent. This high molecular weight curing agent contains no solvents and is designed to provide the high performance of traditional epoxy coatings in low VOC1, non-HAPS2 waterborne epoxy coatings. Although EPIKURE Curing Agent 6870-W-53 exhibits good compatibility with other epoxy resin dispersions, it is designed for use with EPI-REZ™ Resin 6520-WH-53. 1 VOC is the acronym for volatile organic compound, as defined by the U.S. 40CFR51.100 (s). 2 HAP is the acronym for a hazardous air pollutant, as defined by the U.S. Clean Air Act Amendments of 1990. 收起 | Request Sample |
EPIKURE™ Curing Agent 8530-W-75 | Brenntag North America | EPIKURE™ Curing Agent 8530-W-75 is a water-reducible polyamine adduct supplied at 75% weight solids in water. It does not contain any organic solvents or acids. This versatile waterborne curing agent can be combined with a solid epoxy resin dispersion to ...展开 EPIKURE™ Curing Agent 8530-W-75 is a water-reducible polyamine adduct supplied at 75% weight solids in water. It does not contain any organic solvents or acids. This versatile waterborne curing agent can be combined with a solid epoxy resin dispersion to produce ambient-cure metal and concrete coatings. EPIKURE 8530-W-75, when combined with the solid epoxy resin dispersion EPI-REZ™ Resin 7520-WD-52, provides a cost-effective, high-performance alternative to traditional solvent-borne coatings systems. This new system is called the NextGen Epoxy™ Waterborne System. 收起 | Request Sample |
EPIKURE LY™ Curing Agent 3801 | Brenntag North America | EPIKURE LY™ Curing Agent 3801 is a solvent-free, modified cycloaliphatic amine curing agent designed for lower yellowing, and faster cure coatings for concrete protection. It is recommended to be used with EPON LY™ Resin 1810. This combination of epoxy re...展开 EPIKURE LY™ Curing Agent 3801 is a solvent-free, modified cycloaliphatic amine curing agent designed for lower yellowing, and faster cure coatings for concrete protection. It is recommended to be used with EPON LY™ Resin 1810. This combination of epoxy resin and curing agent is designated as the INFINIUM™ Lower Yellowing Epoxy System. 收起 | Request Sample |
EPON LY™ Resin 1810 | Brenntag North America | EPON LY™ Resin 1810 is a solvent-free, modified aliphatic epoxy resin designed for lower yellowing, and faster cure coatings for concrete protection. It is recommended to be used with EPIKURE LY™ Curing Agent 3801. This combination of epoxy resin and curi...展开 EPON LY™ Resin 1810 is a solvent-free, modified aliphatic epoxy resin designed for lower yellowing, and faster cure coatings for concrete protection. It is recommended to be used with EPIKURE LY™ Curing Agent 3801. This combination of epoxy resin and curing agent is designated as the INFINIUM™ Lower Yellowing Epoxy System. 收起 | Request Sample |
EPON™ Resin 1001-CX-75 | Brenntag North America | EPON™ Resin 1001-CX-75 is a 75 percent solids solution of an EPON Resin 1001F type epoxy resin in a blend of 65 percent methyl isobutyl ketone, and 35 percent xylene. Systems using EPON Resin 1001-CX-75 can be formulated to have excellent chemical resista...展开 EPON™ Resin 1001-CX-75 is a 75 percent solids solution of an EPON Resin 1001F type epoxy resin in a blend of 65 percent methyl isobutyl ketone, and 35 percent xylene. Systems using EPON Resin 1001-CX-75 can be formulated to have excellent chemical resistance, corrosion resistance, and low color. This resin is used in formulating various room temperature curing industrial maintenance coatings including clears, primers, masonry surfaces, and gloss and semigloss enamels. The base resin is also available in other solvent lineups. 收起 | Request Sample |
EPON™ Resin 1007F | Brenntag North America | EPON™ Resin 1007F is a moderately high molecular weight solid epoxy resin derived from a liquid epoxy resin and bisphenol-A. This resin is used extensively as a vehicle in high-performance industrial baking finishes. In these coatings, the EPON Resin 1007...展开 EPON™ Resin 1007F is a moderately high molecular weight solid epoxy resin derived from a liquid epoxy resin and bisphenol-A. This resin is used extensively as a vehicle in high-performance industrial baking finishes. In these coatings, the EPON Resin 1007F is usually reacted with urea formaldehyde or phenol-formaldehyde resins to develop the desired film properties. Coatings of this type exhibit outstanding flexibility and adhesion as well as exceptional resistance to chemicals and solvents. Some of the more important applications for EPON Resin 1007F/ureaformaldehyde or phenol formaldehyde coatings are linings for metal containers, appliance primers, metal furniture finishes, and clear coatings for brass hardware and cosmetic cases. EPON Resin 1007F also finds application in powder coatings and may be used as a partial replacement for other EPON Resins in amine or polyamide cured two package coatings. In addition, this product can be reacted with vegetable oil acids and isocyanate curing agents to produce epoxy resin esters and urethane coatings, respectively. 收起 | Request Sample |
EPON™ Resin 160 | Brenntag North America | EPON™ Resin 160 is a multifunctional novolac resin. It combines low viscosity and ease of processing with good thermal stability and chemical resistance for use in a number of applications. | Request Sample |
EPON™ Resin 233 | Brenntag North America | EPON™ Resin 233 is a low viscosity resin based on a mixture of Bisphenol-F epoxy resin and a Bisphenol-A epoxy resin that has been modified to provide easy handling, and superior compatibility (no induction) and excellent concrete adhesion when used with ...展开 EPON™ Resin 233 is a low viscosity resin based on a mixture of Bisphenol-F epoxy resin and a Bisphenol-A epoxy resin that has been modified to provide easy handling, and superior compatibility (no induction) and excellent concrete adhesion when used with cycloaliphatic amine curing agents. 收起 | Request Sample |
EPON™ Resin 828 | Brenntag North America | EPON™ Resin 828 is an undiluted clear dysfunctional bisphenol A/epichlorohydrin derived liquid epoxy resin. When cross-linked or hardened with appropriate curing agents, very good mechanical, adhesive, dielectric and chemical resistance properties are obt...展开 EPON™ Resin 828 is an undiluted clear dysfunctional bisphenol A/epichlorohydrin derived liquid epoxy resin. When cross-linked or hardened with appropriate curing agents, very good mechanical, adhesive, dielectric and chemical resistance properties are obtained. Because of this versatility, EPON Resin 828 has become a standard epoxy resin used in formulation, fabrication, and fusion technology. 收起 | Request Sample |
EPON™ Resin 874-G-90 | Brenntag North America | EPON™ Resin 874-G-90 is a Bisphenol-A-based epoxy resin that has been modified to improve flexibility and reduce solution viscosity. EPON Resin 874-G-90 is supplied at 90% weight solids in normal-butyl acetate solvent (non-HAPS). In coatings applications,...展开 EPON™ Resin 874-G-90 is a Bisphenol-A-based epoxy resin that has been modified to improve flexibility and reduce solution viscosity. EPON Resin 874-G-90 is supplied at 90% weight solids in normal-butyl acetate solvent (non-HAPS). In coatings applications, EPON Resin 874-G-90 outperforms standard liquid epoxy resin grades (e.g., EPON Resin 828) offering better flexibility and faster dry times while providing comparable performance to solid epoxy resin grades like EPON Resin 1001F. EPON Resin 874-G-90 can be formulated into non-HAPs coatings (<250 g/l VOC) that offer performance equivalent to standard epoxy-polyamide systems. A wide variety of curing agents can be used with EPON 874-G-90 including low viscosity polyamidoamines (e.g. EPIKURE™ Curing Agent 3175), cycloaliphatic amines, and amine adducts. 收起 | Request Sample |
EPOSIL™ Resin 5550 | Brenntag North America | EPOSIL™ Resin 5550 is a siloxane-modified hybrid epoxy resin designed to be formulated into protective topcoats. This resin can be cross-linked by amine or amino-silane curing agents. EPOSIL™ Resin 5550 can be used to develop isocyanate-free, high-perform...展开 EPOSIL™ Resin 5550 is a siloxane-modified hybrid epoxy resin designed to be formulated into protective topcoats. This resin can be cross-linked by amine or amino-silane curing agents. EPOSIL™ Resin 5550 can be used to develop isocyanate-free, high-performance topcoats with the potential to reduce the overall cost of ownership through improved durability and fewer coating layers. 收起 | Request Sample |
HELOXY™ Modifier 8 | Brenntag North America | HELOXY™ Modifier 8 is an aliphatic monoglycidyl ether containing alkyl chains that are predominately C12 and C14 in length. Its primary use is the viscosity reducing modification of epoxy resin formulations. | Request Sample |
P. GLYCOL ETHER DPNB | Brenntag North America | P. GLYCOL ETHER DPNB (Dipropylene glycol n-butyl ether) is a colourless liquid with a mild odour and low volatility. It has low water solubility, good coupling and demonstrates good solvency for coating resins. It is ideal for use in coatings, inks, texti...展开 P. GLYCOL ETHER DPNB (Dipropylene glycol n-butyl ether) is a colourless liquid with a mild odour and low volatility. It has low water solubility, good coupling and demonstrates good solvency for coating resins. It is ideal for use in coatings, inks, textiles, cleaners, agricultural products, and adhesives. 收起 | Request Sample |
P. GLYCOL ETHER PM ACETATE | Brenntag North America | P. GLYCOL ETHER PM ACETATE (Propylene glycol methyl ether acetate) is a colourless, combustible liquid with a low order of toxicity and a mild ester-like odour. It has excellent solvency for a variety of substances including acrylic, nitrocellulose and ur...展开 P. GLYCOL ETHER PM ACETATE (Propylene glycol methyl ether acetate) is a colourless, combustible liquid with a low order of toxicity and a mild ester-like odour. It has excellent solvency for a variety of substances including acrylic, nitrocellulose and urethane coating resins. 收起 | Request Sample |
P. GLYCOL ETHER PNB | Brenntag North America | P. GLYCOL ETHER PNB (Propylene glycol n-butyl ether) is a colourless liquid with a characteristic odour. It has low water solubility, good coupling and demonstrates good solvency for coating resins. It is ideal for use in coatings, inks, textiles, cleaner...展开 P. GLYCOL ETHER PNB (Propylene glycol n-butyl ether) is a colourless liquid with a characteristic odour. It has low water solubility, good coupling and demonstrates good solvency for coating resins. It is ideal for use in coatings, inks, textiles, cleaners, and adhesives. 收起 | Request Sample |
P. GLYCOL ETHER PPH | Brenntag North America | P. GLYCOL ETHER PPH (P. Glycol ether PPH) is a slow-evaporating, very hydrophobic glycol ether ideal in coalescing and carrier solvent applications. It has a low odor. Ideal for use in latex coalescent in water-based architectural and industrial coatings,...展开 P. GLYCOL ETHER PPH (P. Glycol ether PPH) is a slow-evaporating, very hydrophobic glycol ether ideal in coalescing and carrier solvent applications. It has a low odor. Ideal for use in latex coalescent in water-based architectural and industrial coatings, carrier solvent for textile dyes, solvent for inks in ball point and felt tip pens, stamp pads, and textile printing pastes, paint removers, coalescent for latex adhesives, and is useful in the formulation of homogeneous, stable metalworking fluids. 收起 | Request Sample |
Research Curing Agent RSC-4628 | Brenntag North America | Research Curing Agent RSC-4628 is a light color, very low viscosity, amino silane curing agent that is used with EPOSIL™ Resin 5550 for the development of lower yellowing protective topcoats. | Request Sample |
ATEX Filling Machine | Würschum GmbH | ATEX Filling Machine is for filling inflammable liquids and foaming products. Consists of several pistons with drip-preventer and conveyor, optionally with fully automatic capping machine. | |
ATEX Twin Piston Filling Machine PS-1000-2-NV-AT | Würschum GmbH | ATEX Twin Piston Filling Machine PS-1000-2-NV-AT is for filling flammable liquid and viscous products. Consisting of 2 pistons with drip-preventer. Adjustable working platform. Easy to clean. Pneumatic drive. | |
ATEX Twin Piston Filling Machine PS-1000-2-UA-NV-AT | Würschum GmbH | ATEX Twin Piston Filling Machine PS-1000-2-UA-NV-AT is for filling flammable liquid and viscous products. Consisting of 2 pistons with diving nozzles for foaming products, drip-preventer, adjustable working platform. Easy to clean. Pneumatic drive. | |
Automatic Capper AV-200 | Würschum GmbH | Automatic Capper AV-200 is a auto-capper with feeding system for screw caps and press caps. Caps are placed on the bottle by a feeding system and each bottle is fed to the capper. | |
Electrical Filling Machine Touch Fill 1000 | Würschum GmbH | Electrical Filling Machine Touch Fill 1000 is a semi automatic electrical filling machine for liquid products, Stainless steel design with Touch screen and recipe manager. Products include cleaning detergent, thinner, polish, rust-proofing, ink, paint, va...展开 Electrical Filling Machine Touch Fill 1000 is a semi automatic electrical filling machine for liquid products, Stainless steel design with Touch screen and recipe manager. Products include cleaning detergent, thinner, polish, rust-proofing, ink, paint, varnish, shampoo, hair tonic, body lotion, oil, juice, soup, ketchup, jam, medicine etc. 收起 | |
Filling Line AFS 1000-4 | Würschum GmbH | Filling Line AFS 1000-4 is for filling of liquid and viscous products, e.g. car polish. Comprising of four-piston filler with rotary slide valve, drip prevention, fully automatic capping machine and conveyor. Servo-motor drive and electropneumatic control...展开 Filling Line AFS 1000-4 is for filling of liquid and viscous products, e.g. car polish. Comprising of four-piston filler with rotary slide valve, drip prevention, fully automatic capping machine and conveyor. Servo-motor drive and electropneumatic control with microprocessor. 收起 | |
Filling Line PA-10 000-UA-NV | Würschum GmbH | Filling Line PA-10 000-UA-NV is for filling liquid and viscous products, with drip preventer and diving nozzle for foaming products, roller conveyor and screwer. Pneumatically operated. | |
Filling Line- and Capping Machine AFS-1000-4 / AV-200 | Würschum GmbH | Filling Line- and Capping Machine AFS-1000-4 / AV-200 is a 4-fold fully automatic filling and capping line for liquids and pastes. ZIP-cleaning connections, piston rinsing, aseptic pistons, Mono-block built. Perfect for mayonnaise, ketchup, salad dressing...展开 Filling Line- and Capping Machine AFS-1000-4 / AV-200 is a 4-fold fully automatic filling and capping line for liquids and pastes. ZIP-cleaning connections, piston rinsing, aseptic pistons, Mono-block built. Perfect for mayonnaise, ketchup, salad dressings, marinades etc. 收起 | |
Filling Machine ESP 1000-UA-TR | Würschum GmbH | Filling Machine ESP 1000-UA-TR is the same construction and capacities as PS- Series. Completely designed in stainless steel for explosion proof areas. Perfect in filling liquids, foamy, viscous, and explosion endangered products. | |
Filling Machine H 200-TR | Würschum GmbH | Filling Machine H 200-TR is a manual volumetric piston dosing machine. Ready to use, easy handling, and easy to clean. | |
Filling Machine H 500-P | Würschum GmbH | Filling Machine H 500-P is a pneumatic volumetric piston dosing machine. It is ready to use, easy handling, and easy to clean. | |
Filling Machine PS 1000-DS-TR | Würschum GmbH | Filling Machine PS 1000-DS-TR is a filling machine for products with pieces with rotary slide and hopper for pasty products and for products with pieces. Ready to use, easy handling, and easy to clean. | |
Filling- and Capping Machine AFP-100-2 / AV-200 | Würschum GmbH | Filling- and Capping Machine AFP-100-2 / AV is a fully automatic Filling- and Capping machine for liquid products. Filling range can be increased with exchange sets up to 1050 ml. The settings for the filling range are done manually. The pistons are power...展开 Filling- and Capping Machine AFP-100-2 / AV is a fully automatic Filling- and Capping machine for liquid products. Filling range can be increased with exchange sets up to 1050 ml. The settings for the filling range are done manually. The pistons are powered by a pneumatic drive. The capper is programmable and powered by a servo drive. Optionally bottle feeder can be added. Cap handling with vibration system. 收起 | |
Filling- and Capping Machine AFS-1000-4 / AV-200 | Würschum GmbH | Filling- and Capping Machine AFS-1000-4 / AV-200 is a 4-fold fully automatic filling and capping line for liquid and foaming products. Up to 5000 ml with stroke preselector. Including bottle feeder and turn table and fume extraction. Optional with labelin...展开 Filling- and Capping Machine AFS-1000-4 / AV-200 is a 4-fold fully automatic filling and capping line for liquid and foaming products. Up to 5000 ml with stroke preselector. Including bottle feeder and turn table and fume extraction. Optional with labeling machine. 收起 | |
Manual Filling Machine for Pastes, Creames Type VH 150 | Würschum GmbH | Manual Filling Machine for Pastes, Creames Type VH 150 is a filling range from 10 – 150 ml, exchange set for small filling volumes from 3-15 ml available. Tube filling nozzles, agitator and heatable hopper optional. | |
Manual Screwers SPH2-DE/SEH2-DE | Würschum GmbH | Manual Screwers SPH2-DE/SEH2-DE is SPH-2-DE (pneumatically) and SEH-2-DE (electrically). Suitable for screw caps and press caps for safe and exact torque capping jars, bottles, containers, cans etc. | |
Manual Srewer SPH2/SEH2 | Würschum GmbH | Manual Srewer SPH2/SEH2 is SPH-2 (pneumatically) and SEH-2 (electrically). Suitable for smaller bottles with screw caps, for safe and exact torque capping, for jars, bottles, containers, cans etc. | |
Pneumatic Press Capper DE-1 | Würschum GmbH | Pneumatic press capper with a two-hand security control. Place the press cap manually on the bottle. Move the bottle towards the capping position until it touches the stop. Press both start bottons at the same time. The punch goes down and presses the cap...展开 Pneumatic press capper with a two-hand security control. Place the press cap manually on the bottle. Move the bottle towards the capping position until it touches the stop. Press both start bottons at the same time. The punch goes down and presses the cap on. Thereafter, the punch returns to its original position and the bottle can be removed. 收起 | |
Semi-Automatic Capper SPA-20 | Würschum GmbH | Semi-Automatic Capper SPA-20 is for screw caps and press caps. Place the cap manually on the bottle. The bottle is fed by the conveyor to the capper. The bottle will be positioned and when necessary gently pressed between the jaws. | |
Twin-Piston Filling Machine PS 1000-2-UA | Würschum GmbH | Twin-Piston Filling Machine PS 1000-2-UA is a pneumatic volumetric piston dosing machines with diving nozzles and drip prevention for foaming products. Ready to use, easy handling, and easy to clean. | |
Twin-Piston Filling Machine PSV-1000-2-UA-NV | Würschum GmbH | Twin-Piston Filling Machine PSV-1000-2-UA-NV is for filling liquid and viscous products. Twin piston filling machine with drip preventer and diving nozzle for foaming products, working level control. Easy to clean. Pneumatically operated. |