Accoat 1G | Accoat A/S | Accoat 1G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating proc...展开 Accoat 1G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 收起 | |
Accoat 2G | Accoat A/S | Accoat 2G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating proc...展开 Accoat 2G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 收起 | |
Accofal 1G54 | Accoat A/S | Accoat 1G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating pr...展开 Accoat 1G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 收起 | |
Accofal 2G54 | Accoat A/S | Accoat 2G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating pr...展开 Accoat 2G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 收起 | |
Accofal 3G | Accoat A/S | Accoat 3G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating pro...展开 Accoat 3G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 收起 | |
Accofal 3G54 | Accoat A/S | Accoat 3G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating p...展开 Accoat 3G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 收起 | |
Accoflon 1C | Accoat A/S | Accoflon 1C is a tough, dark grey, heat-resistant fluoroplastic coating with a semi-matte finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adh...展开 Accoflon 1C is a tough, dark grey, heat-resistant fluoroplastic coating with a semi-matte finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry, particularly in mixers, dough vats, on conveyer belts and freeze-drying trays. 收起 | |
Accoflon 2C | Accoat A/S | Accoflon 2C is a durable, dark grey fluorocarbon coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesi...展开 Accoflon 2C is a durable, dark grey fluorocarbon coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry, particularly in transport equipment, foodstuff production and fast food equipment. 收起 | |
Accoflon H | Accoat A/S | Accoflon H is a durable, black fluorocarbon coating with a smooth and semi-glossy finish. Its layer thickness can range from 35 to 60µm .The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the...展开 Accoflon H is a durable, black fluorocarbon coating with a smooth and semi-glossy finish. Its layer thickness can range from 35 to 60µm .The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and transport equipment and plastic moulding equipment due to its durability and non-stick properties. 收起 | |
Accoflon P348 | Accoat A/S | Accoflon P348 is a durable, black fluorocarbon coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion...展开 Accoflon P348 is a durable, black fluorocarbon coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry, particularly in transport equipment, foodstuff production and fast food equipment. 收起 | |
Accolan G | Accoat A/S | Accolan G is a tough, green, heat-resistant fluoroplastic coating with a semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion...展开 Accolan G is a tough, green, heat-resistant fluoroplastic coating with a semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is used in the glue, varnish and paint industries as a coating for a mixing vats, regular vats and other processing equipment. 收起 | |
Accolan LB | Accoat A/S | Accolan LB is a tough, grey/brown, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and...展开 Accolan LB is a tough, grey/brown, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and an optimal low friction to wear ratio. This product is used for many purposes such as on pumps, switchgears, bearings, guides for paper and film, sawblades and other garden tools. 收起 | |
Accolan S | Accoat A/S | Accolan S is a tough, green and black, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust...展开 Accolan S is a tough, green and black, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and an optimal low friction to wear ratio. This product is used for many purposes such as on pumps, switchgears, bearings, guides for paper and film, sawblades and other garden tools. 收起 | |
Accolan Silver | Accoat A/S | Accolan Silver is a durable, silver-metallic, heat-resistant fluoroplastic coating with a half-matte finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and ...展开 Accolan Silver is a durable, silver-metallic, heat-resistant fluoroplastic coating with a half-matte finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and an optimal low friction to wear ratio. This product is safe to use in the foodstuffs industry, particularly in mixers, on conveyer belts and in dough vats. It is also an excellent coating for cutting tools, knives and freeze-drying trays. 收起 | |
Accoshield | Accoat A/S | Accoshield is a black, thermoplastic fluoropolymer coating with a smooth and half-matte finish. It is mainly used for its anti-corrosive and non-stick properties. The product to be coated should be rinsed and sand-blasted to ensure all impurities have bee...展开 Accoshield is a black, thermoplastic fluoropolymer coating with a smooth and half-matte finish. It is mainly used for its anti-corrosive and non-stick properties. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is used in industries where corrosion protection at high temperatures are required. 收起 | |
Accotron | Accoat A/S | Accotron is a dark grey or green colored fluoropolymer coating. It is applied to products mainly to improve anti-corrosive attributes. This product is used in the paints and coatings industry. | |
Accowear | Accoat A/S | Accowear is a reinforcement that is composed of a wear-resistant layer of stainless steel that is porous. It is used in conjunction with a fluoroplastic topcoat. The topcoat provides the non-stick properties while Accowear provides the wear-resistant prop...展开 Accowear is a reinforcement that is composed of a wear-resistant layer of stainless steel that is porous. It is used in conjunction with a fluoroplastic topcoat. The topcoat provides the non-stick properties while Accowear provides the wear-resistant properties. 收起 | |
ATEX Filling Machine | Würschum GmbH | ATEX Filling Machine is for filling inflammable liquids and foaming products. Consists of several pistons with drip-preventer and conveyor, optionally with fully automatic capping machine. | |
ATEX Twin Piston Filling Machine PS-1000-2-NV-AT | Würschum GmbH | ATEX Twin Piston Filling Machine PS-1000-2-NV-AT is for filling flammable liquid and viscous products. Consisting of 2 pistons with drip-preventer. Adjustable working platform. Easy to clean. Pneumatic drive. | |
ATEX Twin Piston Filling Machine PS-1000-2-UA-NV-AT | Würschum GmbH | ATEX Twin Piston Filling Machine PS-1000-2-UA-NV-AT is for filling flammable liquid and viscous products. Consisting of 2 pistons with diving nozzles for foaming products, drip-preventer, adjustable working platform. Easy to clean. Pneumatic drive. | |
Automatic Capper AV-200 | Würschum GmbH | Automatic Capper AV-200 is a auto-capper with feeding system for screw caps and press caps. Caps are placed on the bottle by a feeding system and each bottle is fed to the capper. | |
Electrical Filling Machine Touch Fill 1000 | Würschum GmbH | Electrical Filling Machine Touch Fill 1000 is a semi automatic electrical filling machine for liquid products, Stainless steel design with Touch screen and recipe manager. Products include cleaning detergent, thinner, polish, rust-proofing, ink, paint, va...展开 Electrical Filling Machine Touch Fill 1000 is a semi automatic electrical filling machine for liquid products, Stainless steel design with Touch screen and recipe manager. Products include cleaning detergent, thinner, polish, rust-proofing, ink, paint, varnish, shampoo, hair tonic, body lotion, oil, juice, soup, ketchup, jam, medicine etc. 收起 | |
Filling Line AFS 1000-4 | Würschum GmbH | Filling Line AFS 1000-4 is for filling of liquid and viscous products, e.g. car polish. Comprising of four-piston filler with rotary slide valve, drip prevention, fully automatic capping machine and conveyor. Servo-motor drive and electropneumatic control...展开 Filling Line AFS 1000-4 is for filling of liquid and viscous products, e.g. car polish. Comprising of four-piston filler with rotary slide valve, drip prevention, fully automatic capping machine and conveyor. Servo-motor drive and electropneumatic control with microprocessor. 收起 | |
Filling Line PA-10 000-UA-NV | Würschum GmbH | Filling Line PA-10 000-UA-NV is for filling liquid and viscous products, with drip preventer and diving nozzle for foaming products, roller conveyor and screwer. Pneumatically operated. | |
Filling Line- and Capping Machine AFS-1000-4 / AV-200 | Würschum GmbH | Filling Line- and Capping Machine AFS-1000-4 / AV-200 is a 4-fold fully automatic filling and capping line for liquids and pastes. ZIP-cleaning connections, piston rinsing, aseptic pistons, Mono-block built. Perfect for mayonnaise, ketchup, salad dressing...展开 Filling Line- and Capping Machine AFS-1000-4 / AV-200 is a 4-fold fully automatic filling and capping line for liquids and pastes. ZIP-cleaning connections, piston rinsing, aseptic pistons, Mono-block built. Perfect for mayonnaise, ketchup, salad dressings, marinades etc. 收起 | |
Filling Machine ESP 1000-UA-TR | Würschum GmbH | Filling Machine ESP 1000-UA-TR is the same construction and capacities as PS- Series. Completely designed in stainless steel for explosion proof areas. Perfect in filling liquids, foamy, viscous, and explosion endangered products. | |
Filling Machine H 200-TR | Würschum GmbH | Filling Machine H 200-TR is a manual volumetric piston dosing machine. Ready to use, easy handling, and easy to clean. | |
Filling Machine H 500-P | Würschum GmbH | Filling Machine H 500-P is a pneumatic volumetric piston dosing machine. It is ready to use, easy handling, and easy to clean. | |
Filling Machine PS 1000-DS-TR | Würschum GmbH | Filling Machine PS 1000-DS-TR is a filling machine for products with pieces with rotary slide and hopper for pasty products and for products with pieces. Ready to use, easy handling, and easy to clean. | |
Filling- and Capping Machine AFP-100-2 / AV-200 | Würschum GmbH | Filling- and Capping Machine AFP-100-2 / AV is a fully automatic Filling- and Capping machine for liquid products. Filling range can be increased with exchange sets up to 1050 ml. The settings for the filling range are done manually. The pistons are power...展开 Filling- and Capping Machine AFP-100-2 / AV is a fully automatic Filling- and Capping machine for liquid products. Filling range can be increased with exchange sets up to 1050 ml. The settings for the filling range are done manually. The pistons are powered by a pneumatic drive. The capper is programmable and powered by a servo drive. Optionally bottle feeder can be added. Cap handling with vibration system. 收起 | |
Filling- and Capping Machine AFS-1000-4 / AV-200 | Würschum GmbH | Filling- and Capping Machine AFS-1000-4 / AV-200 is a 4-fold fully automatic filling and capping line for liquid and foaming products. Up to 5000 ml with stroke preselector. Including bottle feeder and turn table and fume extraction. Optional with labelin...展开 Filling- and Capping Machine AFS-1000-4 / AV-200 is a 4-fold fully automatic filling and capping line for liquid and foaming products. Up to 5000 ml with stroke preselector. Including bottle feeder and turn table and fume extraction. Optional with labeling machine. 收起 | |
Manual Filling Machine for Pastes, Creames Type VH 150 | Würschum GmbH | Manual Filling Machine for Pastes, Creames Type VH 150 is a filling range from 10 – 150 ml, exchange set for small filling volumes from 3-15 ml available. Tube filling nozzles, agitator and heatable hopper optional. | |
Manual Screwers SPH2-DE/SEH2-DE | Würschum GmbH | Manual Screwers SPH2-DE/SEH2-DE is SPH-2-DE (pneumatically) and SEH-2-DE (electrically). Suitable for screw caps and press caps for safe and exact torque capping jars, bottles, containers, cans etc. | |
Manual Srewer SPH2/SEH2 | Würschum GmbH | Manual Srewer SPH2/SEH2 is SPH-2 (pneumatically) and SEH-2 (electrically). Suitable for smaller bottles with screw caps, for safe and exact torque capping, for jars, bottles, containers, cans etc. | |
Pneumatic Press Capper DE-1 | Würschum GmbH | Pneumatic press capper with a two-hand security control. Place the press cap manually on the bottle. Move the bottle towards the capping position until it touches the stop. Press both start bottons at the same time. The punch goes down and presses the cap...展开 Pneumatic press capper with a two-hand security control. Place the press cap manually on the bottle. Move the bottle towards the capping position until it touches the stop. Press both start bottons at the same time. The punch goes down and presses the cap on. Thereafter, the punch returns to its original position and the bottle can be removed. 收起 | |
Semi-Automatic Capper SPA-20 | Würschum GmbH | Semi-Automatic Capper SPA-20 is for screw caps and press caps. Place the cap manually on the bottle. The bottle is fed by the conveyor to the capper. The bottle will be positioned and when necessary gently pressed between the jaws. | |
Twin-Piston Filling Machine PS 1000-2-UA | Würschum GmbH | Twin-Piston Filling Machine PS 1000-2-UA is a pneumatic volumetric piston dosing machines with diving nozzles and drip prevention for foaming products. Ready to use, easy handling, and easy to clean. | |
Twin-Piston Filling Machine PSV-1000-2-UA-NV | Würschum GmbH | Twin-Piston Filling Machine PSV-1000-2-UA-NV is for filling liquid and viscous products. Twin piston filling machine with drip preventer and diving nozzle for foaming products, working level control. Easy to clean. Pneumatically operated. |