| Automatic Film Applicator | TQC | The TQC Automatic film applicator provides a reliable basis to apply coating films to test charts, panels or foils in a uniform and reproducible way in order to eliminate variations caused by human factors. Variations in speed, pressure and direction of d...展开 The TQC Automatic film applicator provides a reliable basis to apply coating films to test charts, panels or foils in a uniform and reproducible way in order to eliminate variations caused by human factors. Variations in speed, pressure and direction of draw down cause irregularities. Other factors that may influence the result are the shear rate and the weight of the applicator. With the TQC Automatic film applicator these variable factors are being stabilised. 收起 |  |
| Bend Test Conical Mandrel | TQC | The TQC Bend Test Conical Mandrel is a laboratory apparatus to bend coated test panels over a conical shaped mandrel in order to assess the elasticity or resistance of a coating-, paint or varnish to cracking, elongation and/or detachment from a metal tes...展开 The TQC Bend Test Conical Mandrel is a laboratory apparatus to bend coated test panels over a conical shaped mandrel in order to assess the elasticity or resistance of a coating-, paint or varnish to cracking, elongation and/or detachment from a metal test panel in accordance with ISO 6860 and ASTM D522. The conical shape of the bending area allows the deformation of the test panel and examination of the elasticity range of a coating over any diameter between 3.1 and 38 mm in one single test. 收起 |  |
| Cross Cut Adhesion Test Kit | TQC | The TQC Cross Cut Adhesion Test KIT’s CC1000/CC2000/CC3000 are used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern ...展开 The TQC Cross Cut Adhesion Test KIT’s CC1000/CC2000/CC3000 are used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard substrates. 收起 |  |
| CurveX-2 USB Oven Logger Standard Kit | TQC | Profiling an industrial powder coating oven starts right here with the CurveX-2 Oven Logger standard KIT. The heart of the KIT is the CurveX-2 USB Oven Logger that offers easy-to-use, high quality temperature logging for industrial paint and powdercoat c...展开 Profiling an industrial powder coating oven starts right here with the CurveX-2 Oven Logger standard KIT. The heart of the KIT is the CurveX-2 USB Oven Logger that offers easy-to-use, high quality temperature logging for industrial paint and powdercoat cure ovens. The temperature logger is fitted with a large display for easy menu-driven operation and quick display of measurement results. 收起 |  |
| Film Applicators | TQC | TQC offers a broad range of film applicators: Bird, Baker, Wire Bar, Micrometer Casting Knife, Sag and Leveling, Gap, Quadruplex, Octoplex, etc.. The choice depends on specification or what one is accustomed to. Applicators vary in width, single or multip...展开 TQC offers a broad range of film applicators: Bird, Baker, Wire Bar, Micrometer Casting Knife, Sag and Leveling, Gap, Quadruplex, Octoplex, etc.. The choice depends on specification or what one is accustomed to. Applicators vary in width, single or multiple gap, clearance in either microns or mils, height adjustable or not, or wired in different sizes. 收起 |  |
| GL0010 | TQC | The TQC Gloss meter allows the user to measure fast and simple accurate gloss levels on any flat surface. Whether it be paper, paint, plastic, wood or any other material. No special training or skills are required. Just place the gauge, press the scan but...展开 The TQC Gloss meter allows the user to measure fast and simple accurate gloss levels on any flat surface. Whether it be paper, paint, plastic, wood or any other material. No special training or skills are required. Just place the gauge, press the scan button and read the values. Template options can also provide non-flat surfaces and small test areas. GL0010 is under the model name TQC SoloGloss with a 60 degree measuring angle. 收起 |  |
| GL0020 | TQC | The TQC Gloss meter allows the user to measure fast and simple accurate gloss levels on any flat surface. Whether it be paper, paint, plastic, wood or any other material. No special training or skills are required. Just place the gauge, press the scan but...展开 The TQC Gloss meter allows the user to measure fast and simple accurate gloss levels on any flat surface. Whether it be paper, paint, plastic, wood or any other material. No special training or skills are required. Just place the gauge, press the scan button and read the values. Template options can also provide non-flat surfaces and small test areas. GL0020 is under the model name TQC DuoGloss with 60/20 degree measuring angles. 收起 |  |
| GL0030 | TQC | The TQC Gloss meter allows the user to measure fast and simple accurate gloss levels on any flat surface. Whether it be paper, paint, plastic, wood or any other material. No special training or skills are required. Just place the gauge, press the scan but...展开 The TQC Gloss meter allows the user to measure fast and simple accurate gloss levels on any flat surface. Whether it be paper, paint, plastic, wood or any other material. No special training or skills are required. Just place the gauge, press the scan button and read the values. Template options can also provide non-flat surfaces and small test areas. GL0010 is under the model name TQC PolyGloss with a 85/60/20 degree measuring angle. 收起 |  |
| Grindometers | TQC | The TQC Grindometers or Fineness of Grind Gauges are precision instruments to determine particle size and fineness of many materials like paints, lacquers, pigments, filler, chocolate etc.. Most TQC Grindometers have double grooves with graded slopes grad...展开 The TQC Grindometers or Fineness of Grind Gauges are precision instruments to determine particle size and fineness of many materials like paints, lacquers, pigments, filler, chocolate etc.. Most TQC Grindometers have double grooves with graded slopes graduated in three different parameters: µm (microns), NS (Hegman) and PCU (North). Gauge and beveled scraper are made of hardened stainless steel and have an accuracy of 2 µm. 收起 |  |
| Ideal Finish Analysis | TQC | The TQC Ideal Finish Analysis Software is the most advanced coating climate, coating cure and coating thickness monitoring software package available today. With two user levels Ideal Finish Analysis offers user friendly reporting functions for standard p...展开 The TQC Ideal Finish Analysis Software is the most advanced coating climate, coating cure and coating thickness monitoring software package available today. With two user levels Ideal Finish Analysis offers user friendly reporting functions for standard production work as well as ad-vanced calculations for in-depth analysis of the climate parameters prior to coating, the curing process and oven performance during coating and the thickness after coating. 收起 |  |
| Impact Test | TQC | The TQC Impact Test is used to determine the impact resistivity and flexibility of coatings. The dual scale instrument is equipped with a special guidance which assures that the distance between each impact is always according to the standard. For correct...展开 The TQC Impact Test is used to determine the impact resistivity and flexibility of coatings. The dual scale instrument is equipped with a special guidance which assures that the distance between each impact is always according to the standard. For correct positioning a spirit-level is built-in. Each Impact test comes as a complete set (instrument and accessoires) to perform a test according DIN/ISO 6272, ASTM D2794 and ASTM G14 收起 |  |
| Pendulum Hardness Tester | TQC | The TQC Pendulum Hardness Tester has a lot of unique features that ease defining hardness by the König and/or Persoz method as described in ISO 1522. Both methods work on the principle that the damping time of a pendulum oscillating on a sample indicates ...展开 The TQC Pendulum Hardness Tester has a lot of unique features that ease defining hardness by the König and/or Persoz method as described in ISO 1522. Both methods work on the principle that the damping time of a pendulum oscillating on a sample indicates the hardness. TQC’s Pendulum Hardness Tester is a modular system. The instrument itself can be used for both the König and- Persoz method. 收起 |  |
| TQC Automatic Cupping Tester SP4305 | TQC | TQC Automatic Cupping Tester to perform a cupping (Erichsen/Dent) test on coated steel panels to define the resistance of paint, varnish or related products to cracking and/or detachment from a metal substrate when subjected to gradual deformation by inde...展开 TQC Automatic Cupping Tester to perform a cupping (Erichsen/Dent) test on coated steel panels to define the resistance of paint, varnish or related products to cracking and/or detachment from a metal substrate when subjected to gradual deformation by indentation under standard conditions. 收起 |  |
| TQC Automatic Washability Test | TQC | It performs an abrasion and washability test on coated panels to define the resistance of paint, varnish or related products to scratching, wearing and colour loss due to wet or dry abrasion. |  |
| Viscosity Cups And Accessories | TQC | TQC Viscosity Flow Cups measure the consistency of paints, varnishes and other similar products. Each TQC viscosity cup is made under continuing quality control procedures and provided with an engraved unique serial number. The design of the cup and orif...展开 TQC Viscosity Flow Cups measure the consistency of paints, varnishes and other similar products. Each TQC viscosity cup is made under continuing quality control procedures and provided with an engraved unique serial number. The design of the cup and orifice eliminate hard to clean recesses. The inner dimensions are according specified standards. Since not all orifices are specified in the standards, additional orifices have been designed to comfort unspecified applications. 收起 |  |
