| CEVA | Suny Chem | CEVA is soluble in toluene and xylene. It has elasticity like rubber, good solubility and fluidity at room temperature. In addition, it has good weather resistance, chemical resistance, oil resistance, ozone resistance and flame resistance property. | |
| Crestakyd® 44-5027 | Scott Bader | Crestakyd® 44-5027 is a rosin and phenolic modified alkyd with exceptional drying and excellent water, petrol and oil resistance. | |
| Tykote® 6152 | Mallard Creek Polymers, Inc. | Tykote® 6152 is a styrene-acrylic emulsion designed to give excellent oil and resistance while balancing water resistance and flexibility. It is a hard film forming styrene-acrylic emulsion designed for oil and grease resistant barrier coatings. | |
| Rovene® 4009 | Mallard Creek Polymers, Inc. | Rovene® 4009 is a carboxylated styrene-butadiene emulsion that exhibits an excellent balance of water resistance, grease and oil resistance, and low moisture vapor transmission. It can be compounded into highly water and grease resistant paper and board c...展开 Rovene® 4009 is a carboxylated styrene-butadiene emulsion that exhibits an excellent balance of water resistance, grease and oil resistance, and low moisture vapor transmission. It can be compounded into highly water and grease resistant paper and board coatings. 收起 | |
| Barrier-Seal R6728A | The International Group, Inc. (IGI Wax) | Barrier-Seal R6728A is a water-based coating designed for SBS cup stock and other paper based substrates. It can be used for any packaging application that requires excellent water resistance, oil resistance and heat seal. | |
| Disvipol-252 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-252 is a phenolic resin. This product has high purity, is oil-resistant, and is compatible with neoprene rubber solutions. It can be used in flexogravure inks, spirit varnishes, traffic paints, and adhesives. | |
| 2-Methoxyethyl Acrylate (MTA) | Kowa American Corporation | 2-Methoxyethyl Acrylate (MTA) is a specialty monomer for the synthesis of specific polymers in the coatings, paint, adhesive and plastic market segments. Polymers containing MTA have improved bendability, flexibility at lower temperatures, UV resistance, ...展开 2-Methoxyethyl Acrylate (MTA) is a specialty monomer for the synthesis of specific polymers in the coatings, paint, adhesive and plastic market segments. Polymers containing MTA have improved bendability, flexibility at lower temperatures, UV resistance, water resistance and adhesion. When used as an additive, it improves oil resistance dues to its polarity. 收起 | Request Sample |
| Paper and Paperboard Oil and Grease Resistant Barriers - Rod Applied Formula | Mallard Creek Polymers, Inc. | A functional or barrier coating may be applied to a paper or paperboard substrate to provide a barrier or other desired properties.These coatings can be used in both food and non-food paperboard packaging applications.The barrier coating blocks the passage of particular substances including: moisture vapor, water, oil...展开 A functional or barrier coating may be applied to a paper or paperboard substrate to provide a barrier or other desired properties.These coatings can be used in both food and non-food paperboard packaging applications.The barrier coating blocks the passage of particular substances including: moisture vapor, water, oils, and grease under a variety of conditions and temperatures. The purpose of a barrier coating is to provide protection, to ensure a longer shelf-life, and to better protect the product and package integrity. 收起 | |
| RHOPLEX™ WL-91 | Univar Solutions | RHOPLEX™ WL-91 is a thermoplastic acrylic emulsion polymer can be formulated into both concrete and tile sealers. Formulations are comparable in performance, yet lower in cost, than aqueous acrylicurethane systems found in the marketplace today by avoiding surface preparation and raw materials associated with many solvent-borne systems. Furthermore, it exhibits superiority in chemical resistance, oil resistance...展开 RHOPLEX™ WL-91 is a thermoplastic acrylic emulsion polymer can be formulated into both concrete and tile sealers. Formulations are comparable in performance, yet lower in cost, than aqueous acrylicurethane systems found in the marketplace today by avoiding surface preparation and raw materials associated with many solvent-borne systems. Furthermore, it exhibits superiority in chemical resistance, oil resistance, and film toughness. 收起 | Request Sample |
| Paper and Paperboard Oil and Grease Resistant Barriers - Flexo or Gravure Applied Formula | Mallard Creek Polymers, Inc. | A functional or barrier coating may be applied to a paper or paperboard substrate to provide a barrier or other desired properties.These coatings can be used in both food and non-food paperboard packaging applications.The barrier coating blocks the passage of particular substances including: moisture vapor, water, oil...展开 A functional or barrier coating may be applied to a paper or paperboard substrate to provide a barrier or other desired properties.These coatings can be used in both food and non-food paperboard packaging applications.The barrier coating blocks the passage of particular substances including: moisture vapor, water, oils, and grease under a variety of conditions and temperatures. The purpose of a barrier coating is to provide protection, to ensure a longer shelf-life, and to better protect the product and package integrity. 收起 | |
| JONCRYL® 276 | BASF Dispersions & Resins | Joncryl® 276 is an acrylic release coating vehicle to enhance grease resistance. | |
| Rovene® 4019 | Mallard Creek Polymers, Inc. | Rovene® 4019 is a carboxylated styrene-butadiene emulsion that has a firm hand with excellent strength properties. It is recommended for use in paper and paperboard coatings where a high degree of grease, oil and water resistance is needed. | |
| Flex-Rez™ 3370CS A | Lawter | Flex-Rez™ 3370CS A is a polyamide resin that has 100% solids with good adhesion and displaying gel, water, lard, grease, oil and alkali resistance. It is considered suitable for use in flexo/gravure inks for plastics and foils as well as in overprint varn...展开 Flex-Rez™ 3370CS A is a polyamide resin that has 100% solids with good adhesion and displaying gel, water, lard, grease, oil and alkali resistance. It is considered suitable for use in flexo/gravure inks for plastics and foils as well as in overprint varnishes and coatings. 收起 | |
| Ultramoll® V HV | Rhein Chemie Rheinau GmbH | Ultramoll® V HV is an adipic acid polyester appearing as a clear viscous liquid. This polymeric plasticizer is commonly used in polymers to provide resistance to extraction by oil, aliphatic hydrocarbons, and water, migration-resistance when in contact wi...展开 Ultramoll® V HV is an adipic acid polyester appearing as a clear viscous liquid. This polymeric plasticizer is commonly used in polymers to provide resistance to extraction by oil, aliphatic hydrocarbons, and water, migration-resistance when in contact with other plastics and paints, lightfastness, and flexibility through prolonged exposure to elevated temperatures. Ultramoll® V HV finds application in adhesives, sealants, printing inks, calendered films, and cast films. 收起 | |
| ProFlex 8 | P.A.T. Products | ProFlex 8 is a mixture of ortho and para n-Ethyl Toluenesulfonamide. It is one of the most widely compatible plasticizers. In addition, the product promotes adhesion and has excellent thermal stability. ProFlex 8 is highly polar and readily plasticizes nylon, other polyamides, shellac, cellulose acetate, and protein materials. It is outstanding for making compounds resistant to oils, solvents, and greases. Because of its low solubility in petroleum hydrocarbons, ProFlex 8 may be used to produce grease and oil-resistant coatings and adhesives. Nitrocellulose lacquers resistant to grease and aliphatic hydrocarbons may be made by combining ProFlex 8 with ProFlex MH (a sulfonamide-formaldehyde resin). In nylon and other polyamides, ProFlex 8 aids processing by lowering the melting point and improving low temperature flexibility. Cellulose acetate plasticized with ProFlex 8 has a brilliance an polish not obtained with other plasticizers, and sheets and films obtain high tensile strength, elongation and flexibility. Polyvinyl acetate adhesives plasticized with ProFlex 8 show exceptional grease resistance...展开 ProFlex 8 is a mixture of ortho and para n-Ethyl Toluenesulfonamide. It is one of the most widely compatible plasticizers. In addition, the product promotes adhesion and has excellent thermal stability. ProFlex 8 is highly polar and readily plasticizes nylon, other polyamides, shellac, cellulose acetate, and protein materials. It is outstanding for making compounds resistant to oils, solvents, and greases. Because of its low solubility in petroleum hydrocarbons, ProFlex 8 may be used to produce grease and oil-resistant coatings and adhesives. Nitrocellulose lacquers resistant to grease and aliphatic hydrocarbons may be made by combining ProFlex 8 with ProFlex MH (a sulfonamide-formaldehyde resin). In nylon and other polyamides, ProFlex 8 aids processing by lowering the melting point and improving low temperature flexibility. Cellulose acetate plasticized with ProFlex 8 has a brilliance an polish not obtained with other plasticizers, and sheets and films obtain high tensile strength, elongation and flexibility. Polyvinyl acetate adhesives plasticized with ProFlex 8 show exceptional grease resistance and have a quick tack and adhesion for joining difficult surfaces such as rubber to metal. ProFlex 8 is an excellent dye solvent and pigment dispersant. 收起 | Request Sample |
| SETAQUA® B E 356 | Allnex | SETAQUA® B E 356 is a water-thinnable, oil-free, saturated polyester with good resistance to hydrolysis used as a binder in the formulation of stoving top coats and primers. | Request Sample |
| Medium Chrome Yellow E206 Pigment Yellow 34 | Hangzhou Epsilon Chemical Co., Ltd. | Medium Chrome Yellow E206 Pigment Yellow 34 is encapsulated medium chrome yellow with special treatments, it is high strength and opacity, very lower oil absorption, and much higher temperature resistance. | |
| Flex-Rez™ 1155AS A | Lawter | Flex-Rez™ 1155AS A is a polyamide resin with 100% solids and has good pigment wetting, gloss, adhesion and film-forming properties. It also shows good gel resistance as well as water, lard, oil, grease and alkali resistance features. Flex-Rez™ 1155AS A is...展开 Flex-Rez™ 1155AS A is a polyamide resin with 100% solids and has good pigment wetting, gloss, adhesion and film-forming properties. It also shows good gel resistance as well as water, lard, oil, grease and alkali resistance features. Flex-Rez™ 1155AS A is suitable for use in flexo/gravure inks for plastics and foils, in cold seal release lacquers and in coatings and overprint varnishes. 收起 | |
| Pigment Yellow 83 | Hainan Zhongxin Chemical Co., Ltd. | Pigment Yellow 83 is a water soluble yellow powder with a molecular formula of C36H32Cl4N6O8. It can impart resistance to heat, light and weather as well as partial resistance to oil, acid, and alkali. It is primarily used for the creation of offset, solv...展开 Pigment Yellow 83 is a water soluble yellow powder with a molecular formula of C36H32Cl4N6O8. It can impart resistance to heat, light and weather as well as partial resistance to oil, acid, and alkali. It is primarily used for the creation of offset, solvent and water-based inks. Pigment Yellow 83 can also be use as a pigment in the production of plastics, masterbatches, rubber, textile printing, coatings and paints. 收起 | |
| SLIP-AYD® SL 78 | Elementis | SLIP-AYD® SL 78 is a solventborne dispersion of polyethylene wax in short-oil coconut alkyd resin/xylene solvent. It provides significant reduction of coefficient of friction and good resistance to marring, scuffing, abrasion and metal marking. | |
| Pigment Yellow 74 | Hainan Zhongxin Chemical Co., Ltd. | Pigment Yellow 74 ( Fast Yellow 74) is a water soluble yellow powder with a molecular formula of C18H18N4O6. It can impart resistance to heat, light and weather as well as partial resistance to oil, acid, and alkali. It is primarily used for the creation ...展开 Pigment Yellow 74 ( Fast Yellow 74) is a water soluble yellow powder with a molecular formula of C18H18N4O6. It can impart resistance to heat, light and weather as well as partial resistance to oil, acid, and alkali. It is primarily used for the creation of offset, solvent and water-based inks. Pigment Yellow 74 can also be use as a pigment in the production of plastics, masterbatches, rubber, textile printing, coatings and paints. 收起 | |
| Pigment Yellow 180 | Hainan Zhongxin Chemical Co., Ltd. | Pigment Yellow 180 (Fast Yellow 180) is a water soluble yellow powder with the molecular formula of C36H32N10O8. It can be used to provide resistance to heat, light and weather as well as some resistance to oil, acid and alkali. Pigment Yellow 180 is prim...展开 Pigment Yellow 180 (Fast Yellow 180) is a water soluble yellow powder with the molecular formula of C36H32N10O8. It can be used to provide resistance to heat, light and weather as well as some resistance to oil, acid and alkali. Pigment Yellow 180 is primarily used for the creation of offset, solvent and water-based inks. It can also be use as a pigment in the production of plastics, masterbatches, rubber, textile printing, coatings and paints. 收起 | |
| PHENODUR® PR 401/72B | Allnex | PHENODUR® PR 401 72% B is a curable unplasticized phenolic resin. It is recommended for coating the interior and exterior surfaces of packaging containers and cans; as high adhesion, chemically resistant protective coatings for apparatus, vessels, pipelines, etc.; for heatcuring phenolic/epoxide resin combinations; for heatcuring phenolic/polyvinylbutyral combinations and for physically drying paints with resistance to fuel and oil...展开 PHENODUR® PR 401 72% B is a curable unplasticized phenolic resin. It is recommended for coating the interior and exterior surfaces of packaging containers and cans; as high adhesion, chemically resistant protective coatings for apparatus, vessels, pipelines, etc.; for heatcuring phenolic/epoxide resin combinations; for heatcuring phenolic/polyvinylbutyral combinations and for physically drying paints with resistance to fuel and oil. 收起 | Request Sample |
| Toplin P Linseed Oil | ADM | Toplin P Linseed Oil, in the form of amber clear liquid, is a refined LSO, kettle, with pentaerythritol polymer and maleic anhydride. It is fast bodying, fast drying, and improves water resistance over straight oils. Toplin P Linseed Oil substitutes tung ...展开 Toplin P Linseed Oil, in the form of amber clear liquid, is a refined LSO, kettle, with pentaerythritol polymer and maleic anhydride. It is fast bodying, fast drying, and improves water resistance over straight oils. Toplin P Linseed Oil substitutes tung oil in varnishes, resins, hardboard, and printing inks. 收起 | |
| Toplin X-Z Linseed Oil | ADM | Toplin X-Z Linseed Oil, in the form of amber clear liquid, is a refined LSO, kettle, with pentaerythritol polymer and maleic anhydride. It is fast bodying, fast drying, and improves water resistance over straight oils. Toplin P with Driers Linseed Oil sub...展开 Toplin X-Z Linseed Oil, in the form of amber clear liquid, is a refined LSO, kettle, with pentaerythritol polymer and maleic anhydride. It is fast bodying, fast drying, and improves water resistance over straight oils. Toplin P with Driers Linseed Oil substitutes tung oil in varnishes, resins, hardboard, and printing inks. 收起 | |
| Toplin P With Driers Linseed Oil | ADM | Toplin P with Driers Linseed Oil, in the form of amber clear liquid, is a refined LSO, kettle, with pentaerythritol polymer and maleic anhydride. It is fast bodying, fast drying, and improves water resistance over straight oils. Toplin P with Driers Linse...展开 Toplin P with Driers Linseed Oil, in the form of amber clear liquid, is a refined LSO, kettle, with pentaerythritol polymer and maleic anhydride. It is fast bodying, fast drying, and improves water resistance over straight oils. Toplin P with Driers Linseed Oil substitutes tung oil in varnishes, resins, hardboard, and printing inks. 收起 | |
| SETAQUA® B E 270 | Allnex | SETAQUA® B E 270 is a water thinnable, oil-free, polyester resin. Good hardness, flexibility and adhesion. High stone chip resistance. | Request Sample |
| Alkipol 434-50 A | Polidur San Luis | Alkipol 434-50 A is a medium oil alkyd resin based on soya-bean oil at 50% in white spirit. This product has good yelowing resistance properties, good air dry and final film hardness and good gloss and elasticity. Alkipol 434-50 A is for use in low cost d...展开 Alkipol 434-50 A is a medium oil alkyd resin based on soya-bean oil at 50% in white spirit. This product has good yelowing resistance properties, good air dry and final film hardness and good gloss and elasticity. Alkipol 434-50 A is for use in low cost decorative enamels and undercoats, corrosion resistant primers, air drying and stoving primers and topcoats for industrial applications. 收起 | |
| ALQUIMEX S-50GN | Polimeros Sinteticos, S.A de C.V | Medium oil length Alkyd resin of soybean, diluted in naphtha. For domestic enamel formulation of drying of 4 hours max., provides excellent appearance and outer resistance wing. | |
| Alkipol 380-50 T | Polidur San Luis | Alkipol 380-50 T is a medium oil alkyd resin modified with TDI at 50% in xilol-naphta. This product has excellent air drying properties, excellent final film hardness, good water and salt fog resistance and excellent dielectric properties. Alkipol 380-50 ...展开 Alkipol 380-50 T is a medium oil alkyd resin modified with TDI at 50% in xilol-naphta. This product has excellent air drying properties, excellent final film hardness, good water and salt fog resistance and excellent dielectric properties. Alkipol 380-50 T has applications in fast air drying enamels, varnishes for electrical uses, fast air dry corrosion resistant primers and is an air dry modifier for medium oil alkyd resins. 收起 | |
| Miraglaze™ 7017 A | Lawter | Miraglaze™ 7017 A is a high gloss, heatset overprint varnish made to be resistant to yellowing upon aging and oxidation. The oil, solvents and balanced resin that make up the varnish, allow for fast print runs at lower oven temperatures. The product has a...展开 Miraglaze™ 7017 A is a high gloss, heatset overprint varnish made to be resistant to yellowing upon aging and oxidation. The oil, solvents and balanced resin that make up the varnish, allow for fast print runs at lower oven temperatures. The product has a wax combination that produces prints with optimum slip and rub resistance, making it suitable for use in overprints, particularly heatset applications. 收起 | |
| ALQUIMEX S-50T | Polimeros Sinteticos, S.A de C.V | Medium oil Alkyd of soybean, diluted in toluene. Of fast drying and excellent compatibility with chlorinated rubber. For traffic painting formulation, to modify with chlorinated rubber, providing products of excellent quality, covering perfectly the requi...展开 Medium oil Alkyd of soybean, diluted in toluene. Of fast drying and excellent compatibility with chlorinated rubber. For traffic painting formulation, to modify with chlorinated rubber, providing products of excellent quality, covering perfectly the requirements with drying, adhesion, flexibility, abrasion, exudation and resistance to the gasoline, as well as the resistance outdoors. 收起 | |
| VISIOMER® MEEU 25 M | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® MEEU 25 M is an ureido methacrylate 25% in MMA. Used to impart wet adhesion and wet scrub resistance to solvent based polymers. | |
| H0301 | Long Kou Windstar Chemical Co., Ltd. | H0301 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0601 | Long Kou Windstar Chemical Co., Ltd. | H0601 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0806 | Long Kou Windstar Chemical Co., Ltd. | H0806 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0801 | Long Kou Windstar Chemical Co., Ltd. | H0801 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0901 | Long Kou Windstar Chemical Co., Ltd. | H0901 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0903 | Long Kou Windstar Chemical Co., Ltd. | H0903 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0902 | Long Kou Windstar Chemical Co., Ltd. | H0902 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0904 | Long Kou Windstar Chemical Co., Ltd. | H0904 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0905 | Long Kou Windstar Chemical Co., Ltd. | H0905 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0906 | Long Kou Windstar Chemical Co., Ltd. | H0906 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| VISIOMER® MEEU 50 W | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® MEEU 50 W is an ureido methacrylate 50% in water. It is designed to improve wet adhesion properties of emulsion polymers and wet scrub resistance of the final products. | |
| VIALKYD® AV 608/60WS | Allnex | Vialkyd® AV 608/60WS is an air-drying styrene modified oil that is easy to use, has excellent weather resistance, good water and corrosion resistance, and high gloss. It's used as a sole binder for aluminium paints with brilliant effect and good gloss ret...展开 Vialkyd® AV 608/60WS is an air-drying styrene modified oil that is easy to use, has excellent weather resistance, good water and corrosion resistance, and high gloss. It's used as a sole binder for aluminium paints with brilliant effect and good gloss retention. It's also used for zinc dust paints, mica iron paints, and anticorrosive paints. 收起 | Request Sample |
| Cinergi™ 1407 A | Lawter | Cinergi™ 1407 A is a water-resistant gloss offset varnish that combines linseed, tung oil and phenolic varnish into a product that provides high gloss and water resistance. A good holdout and high viscosity ensure that inks with the product can be reduced...展开 Cinergi™ 1407 A is a water-resistant gloss offset varnish that combines linseed, tung oil and phenolic varnish into a product that provides high gloss and water resistance. A good holdout and high viscosity ensure that inks with the product can be reduced with aliphatic solvents or low viscosity drying oils to boost setting speed without losing gloss. It also has the benefit of good soap and alkali resistance making it ideal for use in a variety of applications. Cinergi™ 1407 A is considered ideal for use in the highest quality offset and letterpress inks, while the product's water resistant feature means it can improve the working properties of lithographic inks. 收起 | |
| SETYRENE™ 13-3504 | Allnex | SETYRENE® 13-3504 resin solution is an oxidizing oil modified alkyd copolymerized with an acrylic monomer to produce a vehicle for fast air dry or bake finishes having good durability and resistance properties. | Request Sample |
| Alkipol 307-50 T | Polidur San Luis | Alkipol 307-50 T is a short oil alkyd resin based on linseed oil. This product has good air drying properties, excellent hardness and good gloss and elasticity. Alkipol 307-50 T has applications in stoving enamels, fast drying enamels, varnishes for elect...展开 Alkipol 307-50 T is a short oil alkyd resin based on linseed oil. This product has good air drying properties, excellent hardness and good gloss and elasticity. Alkipol 307-50 T has applications in stoving enamels, fast drying enamels, varnishes for electrical uses, corrosion resistant primers and cellulose nitrate lacquers. 收起 | |
| Disvipol-271 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-271 is a phenolic resin. This product has high purity and is very chemical- and weather-resistant. It can be used in spar varnishes, marine enamels, Tung oil-adducts for offset printing, and wire enamels. | |
| Crestakyd® 30-5049 | Scott Bader | Crestakyd® 30-5049 is a short oil alkyd with excellent cold check properties, good wet heat resistance, good stackability and excellent all round properties. It has been designed for use in acid curing finishes for wood. | |
| SETAL® 28-4001 | Allnex | SETAL® 28-4001 is an economical high solids oil modified epoxy ester intended for air dry or baking applications. SETAL® 28-4001 is especially suited for uses requiring a hard and flexible finish with excellent adhesion and good alkali and abrasion resist...展开 SETAL® 28-4001 is an economical high solids oil modified epoxy ester intended for air dry or baking applications. SETAL® 28-4001 is especially suited for uses requiring a hard and flexible finish with excellent adhesion and good alkali and abrasion resistance. 收起 | Request Sample |
| POLYTONE P 140 | Polyols & Polymers | A modified phenolic resin for use with drying oil, such as linseed & tung oil. The most outstanding property of this resin is its solubility in white spirit so that cold cut varnishes could be made with this resin. Varnishes made from this resin will have...展开 A modified phenolic resin for use with drying oil, such as linseed & tung oil. The most outstanding property of this resin is its solubility in white spirit so that cold cut varnishes could be made with this resin. Varnishes made from this resin will have excellent water resistance & colour retention properties. Finds its use in anticorrosive paints, marine finishes , sealants & primers printing inks, insulating varnishes, oil varnishes, etc. 收起 | |
| Fast Violet GS2301 | Hangzhou Geecolor Chemical Co., Ltd | Fast Violet GS2301 is a violet bluish pigment that is designed to be used in solvent-based inks. This product has high color strength and provides outstanding fastness properties with resistance to bleeding, migration, alcohol, benzene, ketone and heat re...展开 Fast Violet GS2301 is a violet bluish pigment that is designed to be used in solvent-based inks. This product has high color strength and provides outstanding fastness properties with resistance to bleeding, migration, alcohol, benzene, ketone and heat resistance against temperatures up to 250°C. It also has strong physical properties with a density of 1.5 g/cm3 and an oil absorption rate of 40-50 ml/100g. 收起 | |
| CYCAT® 6051 | Allnex | CYCAT® 6051 is an extremely hydrophobic acid catalyst based on dinonylnaphthalene sulfonic acid supplied at 50% active in n-butanol. It is an oil soluble sulfonic acid that gives excellent humidity resistance in high bake amino and phenolic systems. | Request Sample |
| SARBIO® 7106 Resin | Sartomer Americas | SARBIO® 7106 Resin is an acrylated vegetable oil oligomer developed for energy-curable ink and pigmented coating systems. It imparts hydrophobicity, good flow, and pigment dispersability to litho or offset inks. It exhibits good impact strength and water ...展开 SARBIO® 7106 Resin is an acrylated vegetable oil oligomer developed for energy-curable ink and pigmented coating systems. It imparts hydrophobicity, good flow, and pigment dispersability to litho or offset inks. It exhibits good impact strength and water resistance. 收起 | |
| 1131 Pigment Yellow G | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 1131 Pigment Yellow G has a pH value of 6.5, oil absorption of equal to or less than 55, and a heat resistance of 300. It has recommended applications in PS, AS, ABS, PMMA, and possible applications in water-based inks. | |
| 6250 Fast Violet Toner R | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 6250 Fast Violet Toner R has a pH value of 6.5, oil absorption of equal to or less than 55, and a heat resistance of 120. It has recommended applications in offset inks, water-based inks, PS, AS, ABS, and PMMA. | |
| Fast Violet GS2302 | Hangzhou Geecolor Chemical Co., Ltd | Fast Violet GS2302 is a high performance yellowish violet pigment that is designed to be used in solvent-based inks. It has high color strength and provides outstanding fastness properties with a resistance to bleeding, migration, alcohol, benzene, ketone...展开 Fast Violet GS2302 is a high performance yellowish violet pigment that is designed to be used in solvent-based inks. It has high color strength and provides outstanding fastness properties with a resistance to bleeding, migration, alcohol, benzene, ketone and a heat resistance against temperatures up to 250°C. It also has strong physical properties with a density of 1.5 g/cm3 and an oil absorption rate of 40-50 ml/100g. 收起 | |
| 3118 Fast Scarlet BBN | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 3118 Fast Scarlet BBN has a pH value of 7.0, oil absorption of equal to or less than 45, and a heat resistance of 180. It has recommended applications in PS, solvent-based paints, offset inks, and possible applications in AS and PMMA. | |
| B507 | Tianyi Chemical Engineering Material Co., Ltd. | B507, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 ...展开 B507, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 and 7.0. 收起 | |
| B307 | Tianyi Chemical Engineering Material Co., Ltd. | B307, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 ...展开 B307, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 and 7.0. 收起 | |
| B607 | Tianyi Chemical Engineering Material Co., Ltd. | B607, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 ...展开 B607, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 and 7.0. 收起 | |
| B207 | Tianyi Chemical Engineering Material Co., Ltd. | B207, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 ...展开 B207, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 and 7.0. 收起 | |
| B205 | Tianyi Chemical Engineering Material Co., Ltd. | B205, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 ...展开 B205, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 and 7.0. 收起 | |
| A163 | Tianyi Chemical Engineering Material Co., Ltd. | A163, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 ...展开 A163, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 and 7.0. 收起 | |
| B596 | Tianyi Chemical Engineering Material Co., Ltd. | B596, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 ...展开 B596, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 and 7.0. 收起 | |
| 3122 Quindo Red W | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 3122 Quindo Red W has a pH value of 7.0, oil absorption of equal to or less than 50, and a heat resistance of 300. It has recommended applications in solvent and water based inks, and possible applications in PS, AS, ABS, and PMMA. | |
| Toda Color Y-50 | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color Y-50, in the form of a yellow powder, is an iron oxide pigment. This product has a pH value of 5-7 and an oil absorption of 30-40 ml/100g, and it can be used in heat-resistant coatings and inks. | |
| Toda Color CHS-120 | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color CHS-120, in the form of a red powder, is an iron oxide pigment. This product has a pH value of 3-5 and an oil absorption of 20-30 ml/100g, and it can be used in heat-resistant coatings and inks. | |
| Toda Color CHS-125 | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color CHS-125, in the form of a red powder, is an iron oxide pigment. This product has a pH value of 3-5 and an oil absorption of 20-30 ml/100g, and it can be used in heat-resistant coatings and inks. | |
| Toda Color CHS-180 | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color CHS-180, in the form of a red powder, is an iron oxide pigment. This product has a pH value of 3-5 and an oil absorption of 20-30 ml/100g, and it can be used in heat-resistant coatings and inks. | |
| 3126 Fast Red BBM | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 3126 Fast Red BBM has a pH value of 7.0, oil absorption of equal to or less than 555, and a heat resistance of 200. It has recommended applications in PS, aqueous paints, water-based inks, and possible applications in PMMA and solvent-based paints. | |
| Toda Color TSY-2 | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color TSY-2, in the form of a micronized powder, is a yellow iron oxide pigment. This product has a pH value of 5-7 and an oil absorption of 25-35 ml/100g, and it can be used in heat-resistant coatings and inks. | |
| Toda Color TSY-1 | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color TSY-1, in the form of a micronized powder, is a yellow iron oxide pigment. This product has a pH value of 5-7 and an oil absorption of 25-35 ml/100g, and it can be used in heat-resistant coatings and inks. | |
| TEGO® VariPlus AP | Evonik Operations GmbH, BL Coating Additives | 酮醛缩聚树脂，改善硬度、光泽并缩短干燥时间。 | Request Sample |
| Toda Color TSY-2H | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color TSY-2H, in the form of a micronized powder, is a yellow iron oxide pigment. This product has a pH value of 5-7 and an oil absorption of 25-35 ml/100g, and it can be used in heat-resistant coatings and inks. | |
| Toda Color TSY-1H | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color TSY-1H, in the form of a micronized powder, is a yellow iron oxide pigment. This product has a pH value of 5-7 and an oil absorption of 25-35 ml/100g, and it can be used in heat-resistant coatings and inks. | |
| Toda Color CHS-120M | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color CHS-120M, in the form of a micronized red powder, is an iron oxide pigment. This product has a pH value of 3-5 and an oil absorption of 20-30 ml/100g, and it can be used in heat-resistant coatings and inks. | |
| Toda Color CHS-125M | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color CHS-125M, in the form of a micronized red powder, is an iron oxide pigment. This product has a pH value of 3-5 and an oil absorption of 20-30 ml/100g, and it can be used in heat-resistant coatings and inks. | |
| Toda Color CHS-180M | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color CHS-180M, in the form of a micronized red powder, is an iron oxide pigment. This product has a pH value of 3-5 and an oil absorption of 20-30 ml/100g, and it can be used in heat-resistant coatings and inks. | |
| Toda Color CHS-120MP | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color CHS-120MP, in the form of a micronized red powder, is an iron oxide pigment. This product has a pH value of 5-7 and an oil absorption of 20-30 ml/100g, and it can be used in heat-resistant coatings and inks. | |
| Toda Color CHS-125MP | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color CHS-125MP, in the form of a micronized red powder, is an iron oxide pigment. This product has a pH value of 5-7 and an oil absorption of 20-30 ml/100g, and it can be used in heat-resistant coatings and inks. | |
| Toda Color CHS-180MP | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color CHS-180MP, in the form of a micronized red powder, is an iron oxide pigment. This product has a pH value of 5-7 and an oil absorption of 20-30 ml/100g, and it can be used in heat-resistant coatings and inks. | |
| Toda Color TAN TOP-100 | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color TAN TOP-100, in the form of a yellow powder, is an iron oxide pigment. This product has a pH value of 5-7.5 and an oil absorption of 40-50 ml/100g, and it can be used in heat-resistant coatings and inks. | |
| 3120 Brilliant Red BBC -B | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 3120 Brilliant Red BBC –B has a pH value of 7.0, oil absorption of equal to or less than 60, and a heat resistance of 180. It has recommended applications in PS and offset inks, and possible applications in AS, water-based inks, and aqueous paints. | |
| 3124 Fast Red BBS | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 3124 Fast Red BBS has a pH value of 7.0, oil absorption of equal to or less than 65, and a heat resistance of 200. It has recommended applications in PMMA and solvent-based inks, and possible applications in water-based inks and solvent-based paints. | |
| 3122 Quindo Red | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 3122 Quindo Red has a pH value of 7.0, oil absorption of equal to or less than 50, and a heat resistance of 280. It has recommended applications in PS, AS, ABS, PMMA, offset inks, water-based inks, and a possible application in solvent-based paints. | |
| Alkipol 469-100 | Polidur San Luis | Alkipol 469-100 is a long oil alkyd resin at 100% of solids. This product provides good pigment wetting, good air dry and final film hardness and very good abrasion resistance. Alkipol 469-100 is a vehicle for milling and a plasticizer for road marking pa...展开 Alkipol 469-100 is a long oil alkyd resin at 100% of solids. This product provides good pigment wetting, good air dry and final film hardness and very good abrasion resistance. Alkipol 469-100 is a vehicle for milling and a plasticizer for road marking paints. 收起 | |
| Dorkafill® Pro_Void | BassTech International | Dorkafill® Pro_Void is a functional filler in paint, coatings, and inks. This product provides matting properties and scrub resistance which result in lower oil absorption (and thus a reduction in resin, advantages in dispersion, viscosity and more flexib...展开 Dorkafill® Pro_Void is a functional filler in paint, coatings, and inks. This product provides matting properties and scrub resistance which result in lower oil absorption (and thus a reduction in resin, advantages in dispersion, viscosity and more flexibility in fine tuning of the paint e.g. open time). 收起 | |
| 6260 Permanent Violet RL | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 6260 Permanent Violet RL has a pH value of 7.0, oil absorption of equal to or less than 5, and a heat resistance of 280. It has recommended applications in offset inks, solvent and water based inks, solvent and aqueous based paints, PS, AS, ABS, and PMMA. | |
| 710R Permanent Violet RL | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 710R Permanent Violet RL has a pH value of 7.0, oil absorption of equal to or less than 45, and a heat resistance of 300. It has recommended applications in offset inks, solvent and water based inks, solvent and aqueous based paints, PS, AS, ABS, and PMMA...展开 710R Permanent Violet RL has a pH value of 7.0, oil absorption of equal to or less than 45, and a heat resistance of 300. It has recommended applications in offset inks, solvent and water based inks, solvent and aqueous based paints, PS, AS, ABS, and PMMA. 收起 | |
| 704B Permanent Violet RL | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 704B Permanent Violet RL has a pH value of 7.0, oil absorption of equal to or less than 45, and a heat resistance of 300. It has recommended applications in offset inks, solvent and water based inks, solvent and aqueous based paints, PS, AS, ABS, and PMMA...展开 704B Permanent Violet RL has a pH value of 7.0, oil absorption of equal to or less than 45, and a heat resistance of 300. It has recommended applications in offset inks, solvent and water based inks, solvent and aqueous based paints, PS, AS, ABS, and PMMA. 收起 | |
| 603RW Permanent Violet RL | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 603RW Permanent Violet RL has a pH value of 7.0, oil absorption of equal to or less than 45, and a heat resistance of 300. It has recommended applications in offset inks, solvent and water based inks, solvent and aqueous based paints, PS, AS, ABS, and PMM...展开 603RW Permanent Violet RL has a pH value of 7.0, oil absorption of equal to or less than 45, and a heat resistance of 300. It has recommended applications in offset inks, solvent and water based inks, solvent and aqueous based paints, PS, AS, ABS, and PMMA. 收起 | |
| 106BS Permanent Violet RL | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 106BS Permanent Violet RL has a pH value of 7.0, oil absorption of equal to or less than 45, and a heat resistance of 300. It has recommended applications in offset inks, solvent and water based inks, solvent and aqueous based paints, PS, AS, ABS, and PMM...展开 106BS Permanent Violet RL has a pH value of 7.0, oil absorption of equal to or less than 45, and a heat resistance of 300. It has recommended applications in offset inks, solvent and water based inks, solvent and aqueous based paints, PS, AS, ABS, and PMMA. 收起 | |
| 149RP Permanent Violet RL | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 149RP Permanent Violet RL has a pH value of 7.0, oil absorption of equal to or less than 45, and a heat resistance of 300. It has recommended applications in offset inks, solvent and water based inks, solvent and aqueous based paints, PS, AS, ABS, and PMM...展开 149RP Permanent Violet RL has a pH value of 7.0, oil absorption of equal to or less than 45, and a heat resistance of 300. It has recommended applications in offset inks, solvent and water based inks, solvent and aqueous based paints, PS, AS, ABS, and PMMA. 收起 | |
| 208BP Permanent Violet RL | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 208BP Permanent Violet RL has a pH value of 7.0, oil absorption of equal to or less than 45, and a heat resistance of 300. It has recommended applications in offset inks, solvent and water based inks, solvent and aqueous based paints, PS, AS, ABS, and PMM...展开 208BP Permanent Violet RL has a pH value of 7.0, oil absorption of equal to or less than 45, and a heat resistance of 300. It has recommended applications in offset inks, solvent and water based inks, solvent and aqueous based paints, PS, AS, ABS, and PMMA. 收起 | |
| 100N Permanent Violet RL | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 100N Permanent Violet RL has a pH value of 7.0, oil absorption of equal to or less than 45, and a heat resistance of 300. It has recommended applications in offset inks, solvent and water based inks, solvent and aqueous based paints, PS, AS, ABS, and PMMA...展开 100N Permanent Violet RL has a pH value of 7.0, oil absorption of equal to or less than 45, and a heat resistance of 300. It has recommended applications in offset inks, solvent and water based inks, solvent and aqueous based paints, PS, AS, ABS, and PMMA. 收起 | |
| 103X Permanent Violet RL | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 103X Permanent Violet RL has a pH value of 7.0, oil absorption of equal to or less than 45, and a heat resistance of 300. It has recommended applications in offset inks, solvent and water based inks, solvent and aqueous based paints, PS, AS, ABS, and PMMA...展开 103X Permanent Violet RL has a pH value of 7.0, oil absorption of equal to or less than 45, and a heat resistance of 300. It has recommended applications in offset inks, solvent and water based inks, solvent and aqueous based paints, PS, AS, ABS, and PMMA. 收起 | |
| ALQUIMEX 109 | Polimeros Sinteticos, S.A de C.V | The chain-stopped alkyd of Soybean oil, diluted in Xylene, possess excellent characteristics which include, fast drying, high brightness, durability to weathering, flexibility, hardness and adhesion to steel. For the formulations of fast drying enamels, e...展开 The chain-stopped alkyd of Soybean oil, diluted in Xylene, possess excellent characteristics which include, fast drying, high brightness, durability to weathering, flexibility, hardness and adhesion to steel. For the formulations of fast drying enamels, enamels for repainting automobiles of high brightness, resistance to yellowing, and enamels for industrial finishes. 收起 | |
| CHS-Alkyd AL 7310 | Spolchemie | CHS-Alkyd AL 7310 is a long oiled alkyd resin binder for printing inks. This product is made from soybean oil and it has high viscosity and is fully liquid. The oil length for this product is estimated to be around 75%. This product is primarily used for ...展开 CHS-Alkyd AL 7310 is a long oiled alkyd resin binder for printing inks. This product is made from soybean oil and it has high viscosity and is fully liquid. The oil length for this product is estimated to be around 75%. This product is primarily used for printing inks as a binder for offset, heatset and metal decorating inks. CHS-Alkyd AL 7150 has good color retention, water resistance and pigment wetting. 收起 |
