| Bayhydrol® PR 435 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® PR 435 is an aqueous aliphatic polyurethane dispersion that contains only 5% by weight of organic cosolvent. | |
| Bayhydrol® U 241 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® U 241 is a polyester polyurethane dispersion used in the formulation of stoving industrial coatings, stoving automotive primer surfaces and two-pack polyurethane primers and top coats for plastics. This product has an OH content, solvent-free o...展開 Bayhydrol® U 241 is a polyester polyurethane dispersion used in the formulation of stoving industrial coatings, stoving automotive primer surfaces and two-pack polyurethane primers and top coats for plastics. This product has an OH content, solvent-free of approx. 2.5, a minimum film-forming temperature MFT of approx. 0, and a mean particle size of approx. 50. Bayhydrol® U 241 is a polyester-polyurethane dispersion neutralized with dimethyl ethanol amine which is resistant to hydrolysis. The product can be diluted with water for application and shows no dilution anomalies. Bayhydrol® U 241 can be combined with partially methylated melamine resins to formulate water-dilutable stoving coatings and primers which cure at approx. 120°C. 收起 | |
| Bayhydrol® U 355 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® U 355 is an aliphatic, hydroxyfunctional polyester polyurethane dispersion that is used as binders for the formulation of water-thinnable soft-feel coatings. This product has a viscosity at 23°C, (D = approx. 240 s-1) of 250-650, a non-volatile...展開 Bayhydrol® U 355 is an aliphatic, hydroxyfunctional polyester polyurethane dispersion that is used as binders for the formulation of water-thinnable soft-feel coatings. This product has a viscosity at 23°C, (D = approx. 240 s-1) of 250-650, a non-volatile content (1g / 1h / 125°C) of 53-57, and a pH (10% in water) value of 7.0-7.5. Bayhydrol® U 355 can be combined with flexible polyurethane dispersions, e.g. Bayhydrol® UH 240 and UH 340/1, to formulate soft-feel and suede-effect coatings. This product's suitable polyisocyanate components are Bayhydur® 3100, Bayhydur® VP LS 2306 and Bayhydur® VP LS 2319. 收起 | |
| Bayhydrol® U XP 2698 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® U XP 2698 liphatic, hydroxyfunctional polyester-polyurethane dispersion used as a binder for the formulation of water-reducible soft-touch coatings. This product has an acid number of approx. 8.5, a density at 20°C of approx. 1.07, and an OH co...展開 Bayhydrol® U XP 2698 liphatic, hydroxyfunctional polyester-polyurethane dispersion used as a binder for the formulation of water-reducible soft-touch coatings. This product has an acid number of approx. 8.5, a density at 20°C of approx. 1.07, and an OH content of approx. 0.8. Bayhydrol® U XP 2698 can be used in combination with flexible polyurethane dispersions, e.g. Bayhydrol® UH 340/1, UH 650, UH 2305, UH XP 2658 and UH XP 2660 to formulate soft-touch and suede-effect coatings. The suitable polyisocyanate components are Bayhydur® 304, 3100, XP 2655 and also Desmodur® N 3600 and N 3900. 收起 | |
| Bayhydrol® U XP 2750 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® U XP 2750 is a binder for the formulation of water-reducible 2K-PUR coatings. This product is an aliphatic, hydroxyfunctional polycarbonate ester-polyurethane dispersion, that is cosolvent-free. This product has an acid number of approx. 9.0, a...展開 Bayhydrol® U XP 2750 is a binder for the formulation of water-reducible 2K-PUR coatings. This product is an aliphatic, hydroxyfunctional polycarbonate ester-polyurethane dispersion, that is cosolvent-free. This product has an acid number of approx. 9.0, a density at 20°C of approx. 1.06, and an OH content (solid resin) of approx. 3.6. Bayhydrol® U XP 2750 is a hydroxyfunctional polycarbonate ester-polyurethane dispersion which can be thinned with water to application viscosity. It is a two-component polyurethane hydrocoatings based on Bayhydrol® U XP 2750 are characterized by high weathering resistance (gloss-retention, resistance to cracking), good appearance (high gloss, low haze value) and very high reflow-behavior after dry-or weet-scratching. 收起 | |
| Bayhydrol® U XP 2755 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® U XP 2755 is an solvent-free, aqueous hydroxyfunctional polyester-polyurethane dispersion. When combined with aliphatic polyisocyanates, it is well suited for the formulation of glossy and matte clear 2K polyurethane coatings, as well as pigmen...展開 Bayhydrol® U XP 2755 is an solvent-free, aqueous hydroxyfunctional polyester-polyurethane dispersion. When combined with aliphatic polyisocyanates, it is well suited for the formulation of glossy and matte clear 2K polyurethane coatings, as well as pigmented coatings. This product provides coatings with very good film transparency, high wood warmth, fast drying, high hardness, and long pot life. 收起 | |
| Bayhydrol® U XP 2766 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® U XP 2766 is a hydroxyfunctional polyester-polyurethane dispersion which can be thinned with water to application viscosity. It is a binder for the formulation of water-reducible 2K-PUR coatings, and is an anionic, hydroxyfunctional polyester-p...展開 Bayhydrol® U XP 2766 is a hydroxyfunctional polyester-polyurethane dispersion which can be thinned with water to application viscosity. It is a binder for the formulation of water-reducible 2K-PUR coatings, and is an anionic, hydroxyfunctional polyester-polyurethan dispersion, that is solvent-free. This product has an acid number of approx. 11, a density at 20°C of approx. 1.06, and an OH content (solid resin) of approx. 4.0. Bayhydrol® U XP 2766 is a hydroxyfunctional polyester-polyurethan dispersion which can be thinned with water to application viscosity. In combination with hydrophobic polyisocyanates (e.g. Desmodur® N 3600, N 3900 , XP 2730) and/or with hydrophilic polyisocyanates (e.g. Bayhydur 3100, 304, 305, XP 2487/1, XP 2655) high performance, hard-elastic two-component polurethane-hydrocoatings can be formulated. 收起 | |
| Bayhydrol® UH 2305 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH 2305 is an aliphatic, anionic/non-ionic polyester-polyurethane dispersion that is a shear-stable combination binder used in the formulation of flexible two-component polyurethane top coats with pleasant handle, e.g. soft-feel systems. This p...展開 Bayhydrol® UH 2305 is an aliphatic, anionic/non-ionic polyester-polyurethane dispersion that is a shear-stable combination binder used in the formulation of flexible two-component polyurethane top coats with pleasant handle, e.g. soft-feel systems. This product has an efflux time at 23°C, (4mmcup) of 11-18, a non-volatile content (1g / 1h / 125°C) of 39-41, and a pH value of 6.5-8.5. Bayhydrol® UH 2305 can be used as a combination binder with hydroxy-functional resins, primarily Bayhydrol® U XP 2428, in the formulation of highly flexible two-component polyurethane top coats, e.g. soft-feel systems. After crosslinking with, for example, Bayhydur® 3100, force-drying (e.g. 30 - 45 min at 80 °C) yields films with a pleasant handle and good resistance to abrasion and water. 收起 | |
| Bayhydrol® UH 2342 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH 2342 is a water-dispersible, anionic, fatty acid modified polyurethane dispersion that is useful as a binder in the formulation of water-reducible coatings and sealers for wood and wood materials. This product has a non-volatile content (1g ...展開 Bayhydrol® UH 2342 is a water-dispersible, anionic, fatty acid modified polyurethane dispersion that is useful as a binder in the formulation of water-reducible coatings and sealers for wood and wood materials. This product has a non-volatile content (1g / 1h / 125°C) of 34-36, a viscosity at 23°C, (D = approx. 100/s) of max. 100, and a pH (1:2.5 in demineralised water) level of 6.7-8.2. Due to the product's mechanical and chemical resistance properties, especially its black heel mark resistance, it is ideally suited for the formulation of parquet sealers. A combination with other water-reducible binders is possible because of the many potential combination products. 收起 | |
| Bayhydrol® UH 240 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH 240 is an anionic polyester polyurethane dispersion used as combination binder in highly flexible, water-thinnable, air- and force-drying primers and one-coat finishes for plastics. It gives good surface handle and good resistance to abrasio...展開 Bayhydrol® UH 240 is an anionic polyester polyurethane dispersion used as combination binder in highly flexible, water-thinnable, air- and force-drying primers and one-coat finishes for plastics. It gives good surface handle and good resistance to abrasion/water. This product has an Efflux time at 23°C, (4mmcup) of max. 70, a non-volatile content (1g / 1h / 125°C) of 39-41, and a pH value of 6-8, and a mean particle size of max. 210. Bayhydrol® UH 240 can be used in combination with hydrofunctional resins, preferably Bayhydrol® U XP 2428, and U 355 either U 475, in the formulation of highly flexible two-component polyurethane top coats (e.g. in soft-feel coating systems). After cross-linking, Bayhydur® 3100 force-drying (e.g. 30 - 45 min at 80°C) yields films with good surface handle and good resistance to abrasion and water. 收起 | |
| Bayhydrol® UH 2557 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH 2557 is a cosolvent free aliphatic, anionic, fatty acid-modified polyurethane dispersion used as a binder in the formulation of water-reducible coatings and sealers for wood and wood materials. This product has a non-volatile content (1g / 1...展開 Bayhydrol® UH 2557 is a cosolvent free aliphatic, anionic, fatty acid-modified polyurethane dispersion used as a binder in the formulation of water-reducible coatings and sealers for wood and wood materials. This product has a non-volatile content (1g / 1h / 125°C) of 34-36, a viscosity at 23°C, (D = approx. 100/s) of max. 100, and a pH (1:2.5 in demineralised water) of 7-9. Due to its mechanical and chemical resistances, in particular black heel mark resistance, the product is particularly well suited for the formulation of parquet sealers. Post-curing of such coatings with Bayhydur®, for example, brings additional advantages and results in waterborne two-component coatings with even higher mechanical and chemical resistance. The mixing ratio of mill base to hardener is generally 10:1. The product can also be combined with other water-reducible binders. On account of the many potential co-reactants, compatibility testing should always be carried out. 收起 | |
| Bayhydrol® UH 2558 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH 2558 is a cosolvent-free aliphatic, anionic polyurethane dispersion used as a binder in the formulation of water-reducible coatings and sealers. This product has a non-volatile content (1g / 1h / 125°C) of 35-39, an Efflux time at 23°C, (4mm...展開 Bayhydrol® UH 2558 is a cosolvent-free aliphatic, anionic polyurethane dispersion used as a binder in the formulation of water-reducible coatings and sealers. This product has a non-volatile content (1g / 1h / 125°C) of 35-39, an Efflux time at 23°C, (4mmcup) of max. 40, and a pH (1:3 in demineralised water) value of 7-9. The product is characterized by high resistance to yellowing, very good wet film transparency and very good abrasion resistance (taber), where the films are hard but flexible. Post-curing of such coatings with Bayhydur®, for example, brings additional significant advantages and results in waterborne two-component coatings with significantly higher mechanical and chemical resistance. The mixing ratio of mill base to hardener is generally 10:1. Compatibility with affordable PAC dispersions is good but must be tested on a case-by-case basis. 收起 | |
| Bayhydrol® UH 2593/1 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH 2593/1 is an aliphatic, fatty acid-modified, anionic polyurethane dispersion that is a binder for the formulation of water-reducible coatings and sealers for wood and wood materials. This product has a non-volatile content (1g / 1h / 125°C) ...展開 Bayhydrol® UH 2593/1 is an aliphatic, fatty acid-modified, anionic polyurethane dispersion that is a binder for the formulation of water-reducible coatings and sealers for wood and wood materials. This product has a non-volatile content (1g / 1h / 125°C) of 34-36, a viscosity at 23°C, (D=ca.100) of ≤ 250, and a pH (1:2.5in demineralised water) of 7-9. The product was developed specifically for the formulation of one- and two-component wood coating systems. It is characterized by very good wet film transparency, high hardness and good black heel mark resistance. Post-curing of such coatings with Bayhydur® 305 or Bayhydur® 3100, for example, brings additional significant advantages and results in waterborne two-component coatings with even higher mechanical and chemical resistance. The mixing ratio of mill base to hardener solution is generally 10:1. The product is also suitable for use in a wide range of applications thanks to the combination of good application properties and good compatibility with cost-effective PAC dispersions. 收起 | |
| Bayhydrol® UH 2606 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH 2606 is a solvent-free anionic polyurethane dispersion containing polycarbonate that is used as a binder for the formulation of water-reducible coatings for plastic substrates and wood materials. This product has an Efflux time at 23°C (4mmc...展開 Bayhydrol® UH 2606 is a solvent-free anionic polyurethane dispersion containing polycarbonate that is used as a binder for the formulation of water-reducible coatings for plastic substrates and wood materials. This product has an Efflux time at 23°C (4mmcup) of 12-60, a non-volatile content (1g / 1h / 125°C) of 34-36, and a pH value of 7-9. The product was designed specifically for the coating of plastic substrates. In addition the use in the formulation of PVC floor coatings, the binder exhibits a high grade property profile on a variety of substrates. Filler and topcoat applications (one and two-component) are also plausible. Other possibilities are wood and furniture applications. Bayhydrol UH 2606 yields coatings with good leveling, chemical and weather stabilities. They are also characterized by a tough but flexible property profile. Very good combinations are possible with polyester, polyurethane and acrylic dispersions, and combinations with waterborne UV systems are possible. Resistances can also be improved by post-curing with e.g. Bayhydur®. The mixing ratio of mill base to hardener is generally 10:1. 收起 | |
| Bayhydrol® UH 2952/1 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH 2952/1 is an aliphatic polyurethane resin dispersion used as a binder for waterborne, air- and oven-drying basecoats in two-layer systems for automotive coatings, coatings for plastics, automotive refinishing coatings and industrial coatings...展開 Bayhydrol® UH 2952/1 is an aliphatic polyurethane resin dispersion used as a binder for waterborne, air- and oven-drying basecoats in two-layer systems for automotive coatings, coatings for plastics, automotive refinishing coatings and industrial coatings. This product has an Efflux time at 23°C, (4mmcup) of 10-30, a non-volatile content (1g / 1h / 125°C) of 39-41, and a pH value of 6.5-7.5. When used in two-layer systems with TSA and two-component polyurethane clearcoats, metallic basecoats formulated with Bayhydrol® UH 2952/1 are characterized by even, cloud-free films with a very good metallic effect, excellent gloss and good water resistance. Since it adheres to OEM finishes without prior sanding, the metallic basecoat can also be used for online retouching (45 min at 80°C). The metallic basecoat can be oversprayed with TSA or two-component polyurethane clearcoats after pre-drying e.g. for 5 minutes at an oven temperature of 80°C or for 15 minutes at room temperature. 收起 | |
| Bayhydrol® UH 340/1 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH 340/1 is an aliphatic anionic polyurethane dispersion used as binder in formulation of highly flexible water-thinnable coatings for wood, metal, plastics and mineral substrates. This product is a combination binder to improve elasticity/flex...展開 Bayhydrol® UH 340/1 is an aliphatic anionic polyurethane dispersion used as binder in formulation of highly flexible water-thinnable coatings for wood, metal, plastics and mineral substrates. This product is a combination binder to improve elasticity/flexibility of water-thinnable coatings. This product has an Efflux time at 23°C, (4mmcup) of max. 70, a non-volatile content (1g / 1h / 125°C) of 39-41, a pH value of 6-7, and a mean particle size of 120-220. Bayhydrol® UH 340/1 can be used as the sole binder in the formulation of flexible lightfast coatings. The product is also suitable for combination with other water-thinnable binders. The pH of ready-to-use coatings should be between 7 and 8. Substances such as ammonia can be used to adjust the pH. Yellowing has sometimes been observed on maple. 收起 | |
| Bayhydrol® UH 650 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH 650 is a solvent-free, aliphatic polyurethane resin dispersion in water that can be used as a binder for waterborne, air- and oven-drying base coats in two-coat systems for the coating of plastics, and as a combination binder for soft-touch ...展開 Bayhydrol® UH 650 is a solvent-free, aliphatic polyurethane resin dispersion in water that can be used as a binder for waterborne, air- and oven-drying base coats in two-coat systems for the coating of plastics, and as a combination binder for soft-touch coatings. This product has an Efflux time at 23°C, (4mmcup) of 12-30, a non-volatile content (1g / 1h / 125°C) of 48-52, and a pH value of 6-8. When used in two-layer systems with two-component polyurethane clearcoats, metallic basecoats formulated with Bayhydrol® UH 650 are characterized by good adhesion to many types of plastics, good overcoatability and good water resistance. The metallic basecoat can be oversprayed with a two-component polyurethane clearcoat after predrying e.g. for 5 min at an ambient temperature of 80°C or for 15 min at room temperature. 收起 | |
| Bayhydrol® UH XP 2592 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH XP 2592 is a Polyester-Polyurethane dispersion which dries by oxidation. It can be used as a binder in the formulation of aqueous air- and forced-drying, high-gloss coatings and primers with very good anti-corrosion properties. Mainly used f...展開 Bayhydrol® UH XP 2592 is a Polyester-Polyurethane dispersion which dries by oxidation. It can be used as a binder in the formulation of aqueous air- and forced-drying, high-gloss coatings and primers with very good anti-corrosion properties. Mainly used for general industrial finishes. This product has an acid value of approx. 12, a viscosity at 23°C, (D=approx.40s-1) of approx. 300, a non-volatile content (1g / 1h / 125°C) of approx. 45, and a pH (1:4 in demineralised water) of approx. 7.2. Bayhydrol® UH XP 2592 does not contain any cosolvents, no anti skinning agents and no driers and is therefore label-free. Coatings based on this resin show a quick drying and after drying a quite high hardness. After curing over night a very good water-resistance is achievable. High-gloss coatings, however, need a certain amount of suitable co-solvents and additional amine in the formulation. Bayhydrol® UH XP 2592 can be used as universal resin for high-gloss top coats, effect coats and - due to its excellent anti-corrosion properties – as raw material for primers and single coats. 收起 | |
| Bayhydrol® UH XP 2660 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH XP 2660 is an aliphatic polyester-polyurethane dispersion that is cosolvent-free. It is a combination binder for the formulation of water-reducible soft-feel coatings. This product has an Efflux time at 23°C, (4mmcup) of 10-30, a non-volati...展開 Bayhydrol® UH XP 2660 is an aliphatic polyester-polyurethane dispersion that is cosolvent-free. It is a combination binder for the formulation of water-reducible soft-feel coatings. This product has an Efflux time at 23°C, (4mmcup) of 10-30, a non-volatile content (1g / 1h / 125°C) of 39-41, and a pH (10% in water) of 6-8. Bayhydrol® UH XP 2660 can be used as a binder in combination with hydrofunctional resins, preferably Bayhydrol® U 355 or U 475, in the formulation of highly flexible two-component polyurethane topcoats (e.g. in soft-touch coating systems). When crosslinking with e.g. Bayhydur® 3100, force drying (e.g. 30-45 min at 80°C) yields films with good surface handle, very good resistance to solvents and very good hydrolytic stability. 收起 | |
| Bayhydrol® UH XP 2719 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH XP 2719 is a solvent-free aliphatic, polyester-based, anionic polyurethane dispersion that is used as a binder for the formulation of water-reducible one and two-component coatings and sealers. This product has an average particle size of ap...展開 Bayhydrol® UH XP 2719 is a solvent-free aliphatic, polyester-based, anionic polyurethane dispersion that is used as a binder for the formulation of water-reducible one and two-component coatings and sealers. This product has an average particle size of approx. 100, a minimum film-forming temperature of 21, and a density of 1,06. The product is characterized by fast drying and good blocking resistance. It can be used in both one-component and two-component formulations, and can also be combined with other anionic, hydrophilized dispersions, such as polyacrylate and polyurethane dispersions. 收起 | |
| Bayhydrol® UV 2282 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UV 2282 is a waterborne, UV-curing polyurethane dispersion that can be used in the formulation of physically drying, waterborne UV-curing wood and plastic coatings. This product has a flow time at 23°C, (4mmcup) of ≤ 50, a non-volatile content ...展開 Bayhydrol® UV 2282 is a waterborne, UV-curing polyurethane dispersion that can be used in the formulation of physically drying, waterborne UV-curing wood and plastic coatings. This product has a flow time at 23°C, (4mmcup) of ≤ 50, a non-volatile content (1g / 1h / 125°C) of 39 ± 1, and a pH level of 7.75 ± 0.75. Bayhydrol® UV 2282 is used in the formulation of High Quality Waterborne UV-curing Wood coatings, that will normally pass the DIN 68 861-1B norm. After the water has evaporated, the coating is physically dry and handable. UV-Curing (10 m/min per 80 W/cm lamp) will result in a very high final quality. The photo initiator demand is low, 1-2% will be enough (by wt., calculated on solid binder). Coatings based on Bayhydrol® UV 2282 will show good adherence to many substrates, including plastics. 收起 | |
| Bayhydrol® UV 2317 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UV 2317 is a urethane acrylate dispersion that can be used in the formulation of physically drying aqueous UV-curing coatings. This is a clear lacquer that is characterized by its good reemulsification properties and high wet film transparency....展開 Bayhydrol® UV 2317 is a urethane acrylate dispersion that can be used in the formulation of physically drying aqueous UV-curing coatings. This is a clear lacquer that is characterized by its good reemulsification properties and high wet film transparency. This product has a non-volatile content (1g / 1h / 125°C, convection oven) of 35.5-37.5, a flow time at 23°C, (4 mm cup) of 15-80, and a pH-value of 6.8-8.5. Bayhydrol® UV 2317 is used in the formulation of aqueous UV-curing coatings, especially for application on wood/wood materials. Generally speaking, the coated surfaces can be sanded before UV curing. Additions of 1-2.5% by wt. photoinitiator, calculated on the solid binder, have proved suitable for initiating the curing reaction. The viscosity is adjusted by the addition of polyurethane thickeners. If antifoams are used, they should be thinned in solvents, especially if application is by curtain coating. 收起 | |
| Bayhydrol® UV 2689/1 XP | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UV 2689/1 XP is a UV-curable aliphatic polyurethane dispersion, which can be used in the formulation of industrial waterborne UV clear and pigmented coatings. Main applications of this product are plastic coatings (e.g mobile phones) and wood c...展開 Bayhydrol® UV 2689/1 XP is a UV-curable aliphatic polyurethane dispersion, which can be used in the formulation of industrial waterborne UV clear and pigmented coatings. Main applications of this product are plastic coatings (e.g mobile phones) and wood coatings. Before UV curing, the surface of dried films is soft and slightly tacky, whereas after UV-curing, the coatings are hard with high chemical and mechanical resistance. The product is suitable to achieve high gloss coatings. This product has a non-volatile content (1g / 1h / 125°C, convection oven) of 40.0-44.0, a flow time at 23°C, (4 mm cup) of 15.0-50.0, and a pH level of 7.0-8.5. This product is especially suitable for 3C plastic applications e.g. mobile phones and laptops where high performance coatings are required. It is possible to formulate hard high gloss or deep matt clear coats as well as single layer metallic coatings. The resulting coating provides excellent performance meeting the strict requirements of 3C applications. 收起 | |
| Bayhydrol® UV 2720/1 XP | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UV 2720/1 XP is used for the formulation of waterborne UV coatings for industrial coating of plastics and wood and other substrates, and is particularly suitable for pigmented systems. As a thermoformable product, it is an ideal solution for po...展開 Bayhydrol® UV 2720/1 XP is used for the formulation of waterborne UV coatings for industrial coating of plastics and wood and other substrates, and is particularly suitable for pigmented systems. As a thermoformable product, it is an ideal solution for postformable coatings. This product has a non-volatile content (1g / 1h / 125°C, convection oven) of 39-41, a flow time at 23°C, (4 mm cup) of 15-50, and a pH level of 7.0-9.0. Bayhydrol® UV 2720/1 XP is used for the formulation of waterborne UV coatings, in particular for applications that require good blocking resistance after water evaporation and before UV cure (wood, plastic, pigmented systems). The addition of 1.0 to 2.5 wt. photoinitiator relative to binder has proven effective for initiation. Viscosity is adjusted by the addition of polyurethane thickeners. As the dispersion has a relatively high surface tension, the formulation should always contain a wetting agent, such as BYK® 348 (BYK). Matting agents and additives can be dispersed directly into the formulation using a dissolver. 收起 | |
| Bayhydrol® UV XP 2687 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UV XP 2687 is an urethane Acrylate Emulsion that is used in the formulation of waterborne UV curable coatings for wood. It is an emulsion type with high gloss and strong body. This product has a non-volatile content (1g / 1h / 125°C, convection...展開 Bayhydrol® UV XP 2687 is an urethane Acrylate Emulsion that is used in the formulation of waterborne UV curable coatings for wood. It is an emulsion type with high gloss and strong body. This product has a non-volatile content (1g / 1h / 125°C, convection oven) of 46.0-51.0, a viscosity at 23°C of 50-500, and a ph-value of 6.8-8.5. Bayhydrol® UV XP 2687 is used for the formulation of waterborne UV coatings, especially for application on wood/wood materials. As the dispersion has a relatively high surface tension, the formulation should always contain a wetting agent, such as BYK® 348 (BYK), Surfinol MD 20 (Airproducts) or EFKA 3024 (BASF).Viscosity is set by the addition of polyurethane thickeners. Matting agents should be added in the form of pastes. 收起 | |
| Bayhydrol® UV XP 2690 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UV XP 2690 is a UV-curing PU-dispersion that is used for the formulation of waterborne UV coatings for wood and plastic coatings. This product has a non-volatile content (1g / 1h / 125°C, convection oven) of 38-40, a viscosity at 23°C of < 80, ...展開 Bayhydrol® UV XP 2690 is a UV-curing PU-dispersion that is used for the formulation of waterborne UV coatings for wood and plastic coatings. This product has a non-volatile content (1g / 1h / 125°C, convection oven) of 38-40, a viscosity at 23°C of < 80, and a pH level of approx. 7.5-9. For the formulation of weather resistant coatings, the use of light protecting agents (preferably a combination of UV absorbers and hindered amine light stabilizers) is recommended. A modification of the photoinitiator component towards longer absorbing types (MAPO, BAPO) might be necessary. The resulting formulation should always be tested in weathering experiments with regard to the specific substrate, application and curing conditions. 收起 | |
| Bayhydrol® UV XP 2775 | Covestro (formerly Bayer MaterialScience) 科思创 | 聚氨酯丙烯酸酯分散體，無溶劑，用於制備水性紫外光固化的木器和塑料用清漆或色漆,尤其是顏料含量很高的木器漆。 | |
| Bayhydur® 304 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydur® 304 is hydrophilically modified, aliphatic polyisocyanate based on hexamethylate diisocyanate (HDI). It is as the hardener/binder component for high-quality waterborne polymer dispersions and as an additive to improve the property level of water...展開 Bayhydur® 304 is hydrophilically modified, aliphatic polyisocyanate based on hexamethylate diisocyanate (HDI). It is as the hardener/binder component for high-quality waterborne polymer dispersions and as an additive to improve the property level of waterborne coating and adhesive systems. This product has a NCO content of 18.2 ± 0.5, a viscosity at 23°C of 4,000 ± 1,500, a hazen color value of ≤ 60, and a monomeric HDI content of < 0.15. This product is used mainly as the crosslinking partner for waterborne polyol binders (Bayhydrol®) and as a crosslinker for largely pH-neutral waterborne polymer dispersions, including polyurethane (Dispercoll® U), polyvinyl acetate, polyacrylate and synthetic rubber dispersions. 收起 | |
| Bayhydur® 305 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydur® 305 is a hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) that is used as a hardener for aqueous two-component polyurethane systems. This product has a NCO content of 16.2 ± 0,4, a viscosity at 23°C of 6,500 ± 1,500...展開 Bayhydur® 305 is a hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) that is used as a hardener for aqueous two-component polyurethane systems. This product has a NCO content of 16.2 ± 0,4, a viscosity at 23°C of 6,500 ± 1,500, a hazen color value of ≤ 150, and a monomeric HDI content of < 0.15. Bayhydur® 305 is a crosslinker for aqueous coatings. It was developed specially for trade applications where the ease of mixing the hardener by shaking or manual stirring is a key requirement. Despite pre-thinning, the coating yields transparent glossy films. The mixing ratio of mill base to hardener is usually 10:1. 收起 | |
| Bayhydur® 3100 | Covestro (formerly Bayer MaterialScience) 科思创 | 親水脂肪族異氰酸脂，基於六亞甲基二異氰酸酯。用作高質量水性雙組分聚氨酯的硬化劑，以及提升水性涂料性能的添加劑。 | |
| Bayhydur® 401-70 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydur® 401-70 is a hydrophilically modified aliphatic polyisocyanate based on isophorone diisocyanate (IPDI), which is used as the co-reactant for aqueous resins and as the hardener for chemically resistant and weather-stable coating systems. This prod...展開 Bayhydur® 401-70 is a hydrophilically modified aliphatic polyisocyanate based on isophorone diisocyanate (IPDI), which is used as the co-reactant for aqueous resins and as the hardener for chemically resistant and weather-stable coating systems. This product has a NCO content of 9.4 ± 0.5, a non-volatile content (0.2g / 60min / 120°C) of 70 ± 2, and a viscosity at 23°C,(D=81,8s-1) of 600 ± 200. Bayhydur® 401-70 is mainly used as the co-reactant for aqueous polyol binders from the Bayhydrol® range. Due to its hydrophilic character, Bayhydur® 401-70 can be easily emulsified in the aqueous phase. The properties (e.g. resistance to chemicals and solvents) of aqueous two-component polyurethane coatings can be improved by the addition of Bayhydur® 401-70. 收起 | |
| Bayhydur® BL 5335 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydur® BL 5335 is a hydrophilized, blocked aliphatic polyisocyanate based on Desmodur® W, in combination with Bayhydrol® grade OH-functional polymers for the formulation of lightfast, single-component polyurethane baking coatings. This product has a no...展開 Bayhydur® BL 5335 is a hydrophilized, blocked aliphatic polyisocyanate based on Desmodur® W, in combination with Bayhydrol® grade OH-functional polymers for the formulation of lightfast, single-component polyurethane baking coatings. This product has a non-volatile content (1g / 1h / 105°C) of 34-36, a flow time at 23°C, (4mmcup) of 10-30, a pH at 20°C of 4.4-6.0. Bayhydur® BL 5335 is a blocked polyisocyanate and was developed for industrial use. It is used as a hardener for the formulation of lightfast one-component polyurethane baking coatings suitable for spray, dip or roller application. The product is preferably used in glass coating applications. It can be used in combination with Bayhydrol® U XP 2239 for the formulation of hydrolytically stable coatings with good glass adhesion and outstanding resistance to solvents and chemicals, in particular sodium hydroxide. Baking parameters are 30 minutes at 170°C. 收起 | |
| Bayhydur® BL XP 2706 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydur® BL XP 2706 is a reactive, blocked aliphatic polyisocyanate used in combination with Bayhydrol® polyols for the formulation of water-reducible, lightfast one-component polyurethane baking coatings and as an additive in waterborne baking systems t...展開 Bayhydur® BL XP 2706 is a reactive, blocked aliphatic polyisocyanate used in combination with Bayhydrol® polyols for the formulation of water-reducible, lightfast one-component polyurethane baking coatings and as an additive in waterborne baking systems to improve hardness, impact strength, chemical resistance and adhesion. 收起 | |
| Bayhydur® XP 2451 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydur® XP 2451 is an hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). It can be used as the hardener component in the formulation of water-reducible two-component coatings and sealers for mineral substrates and reactive r...展開 Bayhydur® XP 2451 is an hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). It can be used as the hardener component in the formulation of water-reducible two-component coatings and sealers for mineral substrates and reactive resins (EP, PU); also as an additive to enhance the property profile of waterborne coating systems. Due to its hydrophilic character, Bayhydur® XP 2451 can be easily emulsified in the aqueous phase. It is used mainly as the crosslinking agent for aqueous polyol binders (Bayhydrol®). Bayhydur® XP 2451 can also be added to conventional OH-free dispersions to improve their property profiles. 收起 | |
| Bayhydur® XP 2487/1 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydur® XP 2487/1 is an hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI), that can be used as a hardener for water borne two-component polyurethane systems. Bayhydur® XP 2487/1 is a crosslinking agent for waterborne systems...展開 Bayhydur® XP 2487/1 is an hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI), that can be used as a hardener for water borne two-component polyurethane systems. Bayhydur® XP 2487/1 is a crosslinking agent for waterborne systems from which reliable incorporation and high chemical resistance are required. The dispersibility of the product in water is influenced by organic cosolvents. 收起 | |
| Bayhydur® XP 2547 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydur® XP 2547 is a solvent-free, water-dispersible polyisocyanate based on hexamethylene diisocyanate used as a crosslinking agent for two-component waterborne polyurethane coatings. Due to its hydrophilic character, Bayhydur® XP 2547 can be easily di...展開 Bayhydur® XP 2547 is a solvent-free, water-dispersible polyisocyanate based on hexamethylene diisocyanate used as a crosslinking agent for two-component waterborne polyurethane coatings. Due to its hydrophilic character, Bayhydur® XP 2547 can be easily dispersed in the aqueous phase. It is used primarily as the crosslinking agent for waterborne polyol binders (Bayhydrol®). The dispersibility of the product in water is influenced by organic cosolvents. 收起 | |
| Bayhydur® XP 2655 | Covestro (formerly Bayer MaterialScience) 科思创 | 基於六亞甲基二異氰酯(HDI)的親水性脂肪族聚異氰酸酯, 作為水性雙組分聚氨酯涂料體系的固化劑組分。 | |
| Bayhydur® XP 2700 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydur® XP 2700 is an hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI), and acts as a hardener for aqueous two-component polyurethane systems. Bayhydur® XP 2700 is a crosslinker for aqueous coatings. It was developed specia...展開 Bayhydur® XP 2700 is an hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI), and acts as a hardener for aqueous two-component polyurethane systems. Bayhydur® XP 2700 is a crosslinker for aqueous coatings. It was developed specially for trade applications where the ease of mixing the hardener by manual stirring is a key requirement. 收起 | |
| Bayhydur® XP 2759 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydur® XP 2759 is an hydrophillic aliphatic polyisocyanate based on isophorone diisocyanate (IPDI), that can be used as a hardener for waterborne two-component polyurethane systems. Bayhydur® XP 2759 is mainly used as co-reactant for aqueous binders. B...展開 Bayhydur® XP 2759 is an hydrophillic aliphatic polyisocyanate based on isophorone diisocyanate (IPDI), that can be used as a hardener for waterborne two-component polyurethane systems. Bayhydur® XP 2759 is mainly used as co-reactant for aqueous binders. Because of its hydrophilic character, it can be easily emulsified in the aqueous phase. Bayhydur® XP 2759 yields coatings with high chemical and weather resistance. Bayhydur® XP 2759 can be combined with aliphatic HDI based Desmodur® or Bayhydur® grades in order to reduce drying times and increase hardness, weather resistance and open time as well as blister free film thickness. 收起 | |
| Bayhytherm® 3146 | Covestro (formerly Bayer MaterialScience) 科思创 | 水可稀釋的脂肪族自交聯烘干聚氨酯樹脂，用於水性單組分烘干聚氨酯體系。 | |
| Baymedix® AP501 | Covestro (formerly Bayer MaterialScience) 科思创 | Baymedix® AP501 is an aliphatic NCO-terminated prepolymer based on hexamethylene diisocyanate. | |
| Baymedix® AR602 | Covestro (formerly Bayer MaterialScience) 科思创 | Baymedix® AR602 is a polyether polyol based on a tetra-functional starter molecule. | |
| Baymedix® CD102 | Covestro (formerly Bayer MaterialScience) 科思创 | Baymedix® CD102 is an aqueous polyurethane dispersion. | |
| Baymedix® CD104 | Covestro (formerly Bayer MaterialScience) 科思创 | Baymedix® CD104 is an aqueous polyurethane dispersion. | |
| Baymedix® FD103 | Covestro (formerly Bayer MaterialScience) 科思创 | Baymedix® FD103 is an aqueous polyurethane dispersion. | |
| Baymedix® FP503 | Covestro (formerly Bayer MaterialScience) 科思创 | Baymedix® FP503 is an aliphatic, hydrophilic NCO prepolymer blend based on hexamethylene diisocyanate (HDI). | |
| BDT-1006 | Bomar, formerly Dymax Oligomers & Coatings | BDT-1006 is a dendritic acrylate with an average functionality of 6. The hyper-branched structure of BDT-1006 imparts the unique combination of low diluted viscosity with unmatched chemical and thermal resistance, which is ideal in applications where with...展開 BDT-1006 is a dendritic acrylate with an average functionality of 6. The hyper-branched structure of BDT-1006 imparts the unique combination of low diluted viscosity with unmatched chemical and thermal resistance, which is ideal in applications where withstanding exposure to the harshest conditions is paramount. Great for high-temperature applications because thermogravimetric analysis indicates the oligomer doesn’t decompose until 377°C. 收起 | |
| BDT-1015 | Bomar, formerly Dymax Oligomers & Coatings | BDT-1015 is a dendritic acrylate with an average functionality of 15. The hyper-branched structure of BDT-1015 imparts a unique combination of low diluted viscosity with unmatched chemical and thermal resistance. This is ideal in applications where withst...展開 BDT-1015 is a dendritic acrylate with an average functionality of 15. The hyper-branched structure of BDT-1015 imparts a unique combination of low diluted viscosity with unmatched chemical and thermal resistance. This is ideal in applications where withstanding exposure to the hardest of conditions is paramount. BDT-1015 is also great for high-temperature applications because thermogravimetric analysis indicates the oligomer doesn’t decompose until 372°C 收起 | |
| BDT-4330 | Bomar, formerly Dymax Oligomers & Coatings | BDT-4330 is a dendritic acrylate with an average functionality of 30. The hyper-branched structure of BDT-4330 imparts the unique combination of low diluted viscosity with unmatched chemical and thermal resistance, which is ideal in applications where wit...展開 BDT-4330 is a dendritic acrylate with an average functionality of 30. The hyper-branched structure of BDT-4330 imparts the unique combination of low diluted viscosity with unmatched chemical and thermal resistance, which is ideal in applications where withstanding exposure to the harshest conditions is paramount. Great for high-temperature applications because thermogravimetric analysis indicates the oligomer doesn’t decompose until 397° 收起 | |
| Bemliese™ (Basic type: High-performance cellulose nonwoven fabric sheet) | Asahi Kasei Corp. Bemberg Div. | Bemliese™ (Basic type: High-performance cellulose nonwoven fabric sheet) is a nonwoven that is unique in that it is composed of cellulose continuous-filament. Most nonwovens are composed of either natural short fibers or synthetic fibers. Compared with th...展開 Bemliese™ (Basic type: High-performance cellulose nonwoven fabric sheet) is a nonwoven that is unique in that it is composed of cellulose continuous-filament. Most nonwovens are composed of either natural short fibers or synthetic fibers. Compared with these conventional materials, due to composition, Bemliese™ has excellent features such as low particle and lint, high purity and biodegradability, good liquid absorbency, high heat resistance, etc. It's made from cotton linter, which is a by-product of cotton yield. It is suitable for use in filters, hygienic products, medical and agricultural materials, wipes for high-precision machinery and laboratories, etc. It holds international certification in BIODEGRADABLE, VEGAN, and OEKO-TEX. The Basic type: Fiber diameter is about 12~13μm. These values are just for reference and tested by methods of Asahi Kasei. 收起 | |
| BENAQUA® 4000 | Elementis 海名斯特殊化学 | BENAQUA® 4000 為一易於分散的流變助劑粉末，專為低光澤、平光乳膠漆、浮雕及厚塗型塗料與水性黏合劑等應用系統所設計。BENAQUA® 4000 在低與中度剪切速率範圍內提供高黏度特性，且與傳統增稠劑相比在低的產品包裝黏度上具有極佳的抗垂流性質，同時亦可改善剪切稀化的變現象。浮雕等造型效果的增加會使塗料具更豐富的外觀表現。 | |
| BENATHIX® | Elementis 海名斯特殊化学 | BENATHIX® rheological additive is an extremely efficient, modified bentonite clay for solventborne unsaturated polyester paint and coating systems. This organoclay is developed to impart thixotropy and drainage control and does not require high-shear mix...展開 BENATHIX® rheological additive is an extremely efficient, modified bentonite clay for solventborne unsaturated polyester paint and coating systems. This organoclay is developed to impart thixotropy and drainage control and does not require high-shear mixing equipment unlike conventional organoclays. 收起 | |
| BENGEL® 434 | Elementis 海名斯特殊化学 | BENGEL® 434 流變助劑是一種通用型有機膨潤土，專門用於低至中極性脂肪烴及芳香烴塗料系統中。 | |
| BENGEL® 818 | Elementis 海名斯特殊化学 | 與傳統的有機黏土相比，BENGEL® 818 具有極佳的分散性、良好的搖變性、抗流掛性及防沉降性。它屬於超分散型，在生產過程中具有很大的靈活性。推薦用於氣幹型長油度醇酸瓷漆、聚氨酯打磨型封閉底漆、普通的工業維護系統和脂肪族系統中。 | |
| BENGEL® 828 | Elementis 海名斯特殊化学 | BENGEL® 828 流變助劑的超分散性可大大簡化油漆系統的配製及製造。適用於有中至高極性塗料系統，如酮類、酯類、醇酯類、醚酯類、醇類。使用BENGEL® 828給油漆生產商提供了提高生產效率的機會。 | |
| BENGEL® 908 | Elementis 海名斯特殊化学 | BENGEL® 908流变助剂为标準型有机膨润土，适用于中低极性即脂肪烃和芳香烃涂料体系。也可使用于其他较高极性体系。用于中低极性体系具有较高的性价比。 | |
| BENGEL® 958 | Elementis 海名斯特殊化学 | BENGEL® 958流变助剂是一种易分散型有机膨润土，适用于低到中极性有机溶剂体系。提供良好的抗流挂性和防沉性能。容易分散，在生产过程中可灵活操作。推荐使用在气乾型长油醇酸瓷漆、聚氨酯体系、打印油墨、密封胶和脂肪族体系中。 | |
| Benox® B50-106 | UNITED INITIATORS GMBH & CO KG | Benox® B50-106 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy white paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polyme...展開 Benox® B50-106 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy white paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-106 can also be used in two-part adhesive systems based on methacylate or polyester resins. 收起 | |
| Benox® B50-210 | UNITED INITIATORS GMBH & CO KG | Benox® B50-210 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy blue pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent a...展開 Benox® B50-210 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy blue pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-210 can also be used in two-part adhesive systems based on methacylate or polyester resins. 收起 | |
| Benox® B50-230 | UNITED INITIATORS GMBH & CO KG | Benox® B50-230 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy lighter blue pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing...展開 Benox® B50-230 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy lighter blue pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-230 can also be used in two-part adhesive systems based on methacylate or polyester resins. 收起 | |
| Benox® B50-513 | UNITED INITIATORS GMBH & CO KG | Benox® B50-513 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy red pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used as a curing agent and polymerization initiato...展開 Benox® B50-513 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy red pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-513 can also be used in two-part adhesive systems based on methacylate or polyester resins. 收起 | |
| Benox® B50-713 | UNITED INITIATORS GMBH & CO KG | Benox® B50-713 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy onyx pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent a...展開 Benox® B50-713 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy onyx pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-713 can also be used in two-part adhesive systems based on methacylate or polyester resins. 收起 | |
| Benox® B55 | UNITED INITIATORS GMBH & CO KG | Benox® B55 is a fine dispersion of dibenzoyl peroxide in a smooth, non-separating fire resistant creamy paste form with a white or red thixotropic cream appearance. It can freely be dissolved in monomers and resins and is primarily used as a curing agent ...展開 Benox® B55 is a fine dispersion of dibenzoyl peroxide in a smooth, non-separating fire resistant creamy paste form with a white or red thixotropic cream appearance. It can freely be dissolved in monomers and resins and is primarily used as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B55 can also be used in two-part adhesive systems based on methacylate or polyester resins. 收起 | |
| Benox® B55-107 | UNITED INITIATORS GMBH & CO KG | Benox® B55-107 is a fine dispersion of 55% dibenzoyl peroxide in a smooth, non-separating fire resistant white paste form. It is formulated primarily for use in industries which require a product to be further diluted prior to use and in the mine bolt ind...展開 Benox® B55-107 is a fine dispersion of 55% dibenzoyl peroxide in a smooth, non-separating fire resistant white paste form. It is formulated primarily for use in industries which require a product to be further diluted prior to use and in the mine bolt industry. Benox® B55-107 can also be used in two-part adhesive systems based on methacylate or polyester resins. 收起 | |
| Benox® B55-108 | UNITED INITIATORS GMBH & CO KG | Benox® B55-108 is a fine dispersion of 55% dibenzoyl peroxide in a smooth, non-separating fire resistant white paste form. It is formulated primarily for use in elevated and ambient temperature curing of unsaturated polyester resins and is characterized b...展開 Benox® B55-108 is a fine dispersion of 55% dibenzoyl peroxide in a smooth, non-separating fire resistant white paste form. It is formulated primarily for use in elevated and ambient temperature curing of unsaturated polyester resins and is characterized by its lower water content, compared to Benox® B55-107. Benox® B55-108 can also be used in two-part adhesive systems based on methacylate or polyester resins. 收起 | |
| BENTONE® 27 | Elementis 海名斯特殊化学 | BENTONE® 27 為一適用於中至高極性有機溶劑塗料系統與合成黏結劑系統的有機膨潤土添加劑。 | |
| BENTONE® 34 | Elementis 海名斯特殊化学 | BENTONE® 34 為一適用於低至中極性有機溶劑塗料系統的有機膨潤土添加劑。 | |
| BENTONE® 38 | Elementis 海名斯特殊化学 | BENTONE® 38 為一適用於低至中極性有機溶劑塗料系統的有機膨潤土添加劑。 | |
| BENTONE® CT | Elementis 海名斯特殊化学 | BENTONE® CT rheological additive is a natural untreated, hectorite clay of a defined particle size, suitable for thickening and flow control of waterborne paint and aqueous coating systems. This clay based thickener is cost effective rheology modifier tha...展開 BENTONE® CT rheological additive is a natural untreated, hectorite clay of a defined particle size, suitable for thickening and flow control of waterborne paint and aqueous coating systems. This clay based thickener is cost effective rheology modifier that prevents hard settling and builds thixotropy. 收起 | |
| BENTONE® DE | Elementis 海名斯特殊化学 | BENTONE® DE 為一經過精製處理的易分散型鋰蒙脫石黏土類流變助劑。 | |
| BENTONE® DY CE | Elementis 海名斯特殊化学 | BENTONE® DY CE 是專為水性系統設計的有機改質黏土粉末產品，主要使用於內牆乳膠漆。 | |
| BENTONE® EW | Elementis 海名斯特殊化学 | BENTONE® EW为一经过精製处理的粉末状蒙脱石粘土类流变助剂。 | |
| BENTONE® EW NA | Elementis 海名斯特殊化学 | BENTONE® EW NA 為一經高精製處理且易分散的鬆軟粉態蒙脫石黏土類流變助劑。 | |
| BENTONE® GS | Elementis 海名斯特殊化学 | BENTONE® GS rheological additive is a beneficiated, powdered hectorite clay specifically developed for waterborne construction applications such as aqueous (Lime) cement plasters, gypsum plasters, repair mortars, self-leveling floors, cement mortars, and ...展開 BENTONE® GS rheological additive is a beneficiated, powdered hectorite clay specifically developed for waterborne construction applications such as aqueous (Lime) cement plasters, gypsum plasters, repair mortars, self-leveling floors, cement mortars, and concrete. 收起 | |
| BENTONE® LT | Elementis 海名斯特殊化学 | BENTONE® LT 為一經過有機改質的蒙脫石黏土類流變助劑。專為水性系統包括乳膠漆系統所設計。 | |
| BENTONE® OC | Elementis 海名斯特殊化学 | BENTONE® OC 為一特定大小顆粒的天然鋰蒙脫石黏土的流變助劑。適用於礦物基礎建築系統中的增稠及控制流動與操作性的調整。 | |
| BENTONE SD® -1 | Elementis 海名斯特殊化学 | BENTONE SD® -1 為一適用於脂肪族及非極性到中極性有機溶劑塗料系統的有機膨潤土添加劑。 | |
| BENTONE SD® -2 | Elementis 海名斯特殊化学 | BENTONE SD® -2 為一適用於中至高極性有機溶劑塗料系統的有機膨潤土添加劑。 | |
| Benzimidazole Ketone Orange HL | Liaoyang Dongwang Chemical Co., Ltd. | Benzimidazole Ketone Orange HL is an organic pigment, based on Pigment Orange 36. It is suitable for use in printing inks designed to be used on PA and PP plastics, nitrocellulose inks, offset water-based inks and oil/solvent-based or water-based paints a...展開 Benzimidazole Ketone Orange HL is an organic pigment, based on Pigment Orange 36. It is suitable for use in printing inks designed to be used on PA and PP plastics, nitrocellulose inks, offset water-based inks and oil/solvent-based or water-based paints and coatings and plastic cement adhesive. 收起 | |
| Benzimidazolone Yellow H3R | Liaoyang Dongwang Chemical Co., Ltd. | Benzimidazolone Yellow H3R is an organic pigment, based on Pigment Yellow 181. It is suitable for use in oil/solvent-based or water-based paints and coatings and plastic cement adhesive. | |
| Benzotriazole | Chemceed | Benzotriazole is a corrosion inhibitor for copper and copper alloys, and is commonly used in water cooling systems. Additional benzotriazole applications include use as a silver polishing agent in dishwasher detergent, automotive antifreeze, antirust for ...展開 Benzotriazole is a corrosion inhibitor for copper and copper alloys, and is commonly used in water cooling systems. Additional benzotriazole applications include use as a silver polishing agent in dishwasher detergent, automotive antifreeze, antirust for photography, and use as a lubricant additive. 收起 | |
| Benzyl Alcohol USP | Chemceed | Benzyl Alcohol is used as a solvent for paints, inks, coatings. In personal care products, Benzyl Alcohol serves as a precursor in the production of esters used for soaps, perfurme, and flavor. For medical use, Benzyl Alcohol is used as a preservative due...展開 Benzyl Alcohol is used as a solvent for paints, inks, coatings. In personal care products, Benzyl Alcohol serves as a precursor in the production of esters used for soaps, perfurme, and flavor. For medical use, Benzyl Alcohol is used as a preservative due to its bacteriostatic and antipruritic properties. 收起 | |
| Benzyl Benzoate, USP | Chemceed | Benzyl Benzoate is a high solvating benzoate ester plasticizer that can be used in applications such as adhesives, caulks, and sealants. In inks and coatings, Benzyl Benzoate can soften binders to improve flexibility. | |
| Benzylamine | BASF SE, Intermediates Division 巴斯夫中间体 | 結晶脲的基礎原料。基於苄胺的結晶脲作為流挂控制劑應用於烤漆中 | |
| BEPD | Perstorp | BEPD is a polyalcohol in the form of a white crystalline solid. It is a diol containing primary hydroxyl groups and has a BEPD content of at least 99 percent. BEPD can be used in saturated polyesters for can and coil coatings and polyurethanes for coating...展開 BEPD is a polyalcohol in the form of a white crystalline solid. It is a diol containing primary hydroxyl groups and has a BEPD content of at least 99 percent. BEPD can be used in saturated polyesters for can and coil coatings and polyurethanes for coatings. 收起 | |
| Biocel SP/SG 85 | Gohil Dyechem Corporation | Biocel SP/SG 85 is a light brown, granular powder used in the preservation of wood. It is used as an industrial fungicide in paints and adhesives. | |
| Bis-[3-(Triethoxysilyl)Propyl]Amine | Dalian Onichem Co., Ltd. 大连奥利凯化工有限公司 | Bis-[3-(Triethoxysilyl)Propyl]Amine is an efficient crosslinking agent used for polyurethane prepolymer endcapping with good adhesion to difficult substrates. | Request Sample |
| Bis-[3-(Trimethoxysilyl)Propyl]Amine | Dalian Onichem Co., Ltd. 大连奥利凯化工有限公司 | Bis-[3-(Trimethoxysilyl)Propyl]Amine is an efficient crosslinking agent used for polyurethane prepolymer endcapping with good adhesion to difficult substrates. | Request Sample |
| Bis[3-(Triethoxysilyl)Propyl]Disulfide | Dalian Onichem Co., Ltd. 大连奥利凯化工有限公司 | Bis[3-(Triethoxysilyl)Propyl]Disulfide is a coupling agent for rubber belts, hoses, shoe soles and silica filled tires. | Request Sample |
| Bis[3-(Triethoxysilyl)Propyl]Tetrasulfide | Dalian Onichem Co., Ltd. 大连奥利凯化工有限公司 | Bis[3-(Triethoxysilyl)Propyl]Tetrasulfide is a bifunctional polysulfide silane with four sulfur atoms in the center of structure that finds use as adhesion promoter for precious metals, and coupling agent & vulcanizing agent for rubbers. It is ayellowish ...展開 Bis[3-(Triethoxysilyl)Propyl]Tetrasulfide is a bifunctional polysulfide silane with four sulfur atoms in the center of structure that finds use as adhesion promoter for precious metals, and coupling agent & vulcanizing agent for rubbers. It is ayellowish and transparent liquid used to improve the physical properties of sulfur cured compounds and to establish the chemical link between rubber and silica or other active white fillers. 收起 | Request Sample |
| Bisomer® Amine D700 | GEO Specialty Chemicals, Inc. TRIMET Products Group | 多功能氨基醇助劑 | |
| Bisomer® BDDMA | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer BDDMA是一種低粘度低氣味二甲基丙烯酸酯單體 | |
| Bisomer® BZMA | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer® BZMA (Benzyl Methacrylate) is low viscosity mono-functional monomer suitable for a wide range of applications. It is low viscosity and hydrophobic, and is particularly suitable as a reactive diluent in adhesives, sealants, inks and coatings. This...展開 Bisomer® BZMA (Benzyl Methacrylate) is low viscosity mono-functional monomer suitable for a wide range of applications. It is low viscosity and hydrophobic, and is particularly suitable as a reactive diluent in adhesives, sealants, inks and coatings. This product has a methoxyhydroquinone content of 50 ± 5ppm, an acid number of < 0.02mg KOH/g, and a refractive index @ 20°C of 1.51. It can be used as a co-monomer in PMMA based acrylic formulations to increase the impact resistance, hydrophobicity and structural integrity of resins, composites and coatings. It is also particularly useful as a replacement for styrene in unsaturated polyester and vinyl ester resins used in a wide range of applications including chemical fixings and composites. Due to its high refractive index, Bisomer® BZMA is also suitable for cast lenses, optical fibres, transparent laminates and other applications where clarity is a key requirement. 收起 | |
| Bisomer® C13MA | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer C13MA是一種憎水性單官能團甲基丙烯酸酯單體，具有低玻璃化轉變溫度（Tg），是一種出色的柔韌和增塑單體 | |
| Bisomer® CHMA | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer® CHMA is a hydrophobic methacrylate monomer. It is a mono-functional methacrylate, making it ideal for acrylic polymer synthesis. Bisomer® CHMA can be used to improve the hydrophobicity, weathering, physical and chemical resistance of acrylic resi...展開 Bisomer® CHMA is a hydrophobic methacrylate monomer. It is a mono-functional methacrylate, making it ideal for acrylic polymer synthesis. Bisomer® CHMA can be used to improve the hydrophobicity, weathering, physical and chemical resistance of acrylic resins. This product is also a useful reactive diluent in 2K adhesives and coatings. 收起 | |
| Bisomer® CL HEMA | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer® CL HEMA (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogel...展開 Bisomer® CL HEMA (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogels. 收起 | |
| Bisomer® DALP | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bismoer® DALP is a stable ester of high purity, capable of undergoing polymerisation at moderate temperatures to yield thermosetting or thermoplastic resins. It possesses valuable properties for adhesives, coatings, casting and potting compounds. This pro...展開 Bismoer® DALP is a stable ester of high purity, capable of undergoing polymerisation at moderate temperatures to yield thermosetting or thermoplastic resins. It possesses valuable properties for adhesives, coatings, casting and potting compounds. This product has an ester of 99% min., an iodine number of 196gl^2/100g min., and a density @ 20°C of 1.115 to 1.121kg/l. It may also be copolymerised with a variety of common monomers, or used as a “reactive diluent”. When used as a partial replacement for styrene in cross-linking polyesters, Bisomer® DALP produces materials showing up to 25% less shrinkage on cure. Bisomer® DALP may also be employed in self-priming PVC organosols for steel coating or incorporated into EPDM rubber to improve the adhesive strength. 收起 | |
| Bisomer® DEGDMA HI | GEO Specialty Chemicals, Inc. TRIMET Products Group | 它是一種低粘度脂肪族二甲基丙烯酸酯齊聚物，可理想地作為共聚單體用於提高各種塑膠、膠粘劑、密封劑和不飽和聚酯和丙烯酸聚合物，例如丙烯酸切片和丙烯酸地坪的硬度和機械性能 | |
| Bisomer® EP 100 DMA | GEO Specialty Chemicals, Inc. TRIMET Products Group | 特殊設計的嵌段聚烷撐乙二醇的二甲基丙烯酸酯 | |
| Bisomer® EP 150 DMA | GEO Specialty Chemicals, Inc. TRIMET Products Group | 特殊設計的嵌段聚烷撐乙二醇的二甲基丙烯酸酯，可更改配方體系的憎水/親水平衡 |
