| BYK®-016 | BYK 毕克 | BYK®-016是一種礦物油，不含硅的消泡劑，適用於水性無VOC膠粘劑和密封劑 | |
| BYK®-022 | BYK 毕克 | 含硅消泡劑，適用於水性膠粘劑和密封劑 | |
| BYK®-023 | BYK 毕克 | 含硅消泡劑，適用於水性膠粘劑和密封劑 | |
| BYK®-024 | BYK 毕克 | 含硅消泡劑，適用於基於水性乳膠的膠粘劑和密封劑 | |
| BYK®-025 | BYK 毕克 | 含硅消泡劑，適用於基於水性乳膠的膠粘劑和密封劑 | |
| BYK®-028 | BYK 毕克 | 含硅消泡劑，適用於基於水性乳膠的膠粘劑和密封劑 | |
| BYK®-035 | BYK 毕克 | 用於有光澤和半光乳液漆以及乳液彈性體的礦物油消泡劑，消除生產和涂裝過程中的泡沫。特別適合聚氯乙烯含量為20-40%的乳液體系。高剪力不會對效力產生影響。 | |
| BYK®-037 | BYK 毕克 | 礦物油消泡劑，適合乳膠漆、工業乳膠、乳液灰泥和乳液膠粘劑，用於消除生產和施工過程中產生的泡沫 | |
| BYK®-038 | BYK 毕克 | 礦物油消泡劑，適用於乳膠漆、工業乳膠、乳液灰泥和乳膠膠粘劑，可消除其生產和施工過程中產生的泡沫 | |
| BYK®-092 | BYK 毕克 | BYK®-092 is a VOC-free, silicone-containing defoamer for aqueous paint systems, printing inks and adhesives. Wide range of uses for conventional application methods | |
| BYK®-093 | BYK 毕克 | 高耐久性含硅消泡劑，適用於水性膠粘劑和密封劑。該消泡劑兼具高效性和廣泛的相容性 | |
| BYK®-1610 | BYK 毕克 | BYK®-1610是一種消泡劑，適用於基於乳膠的膠粘劑和密封劑 | |
| BYK®-1615 | BYK 毕克 | BYK®-1615是一種消泡劑，適用於基於水性乳膠的膠粘劑和密封劑 | |
| BYK®-1630 | BYK 毕克 | BYK®-1630 is a VOC and APEO-free mineral oil defoamer for aqueous architectural coatings, general industrial coatings, floor coatings and adhesives. | |
| BYK-1641 | BYK 毕克 | BYK-1641 is a VOC- and mineral oil-free defoamer for aqueous systems that is very easy to incorporate and has an excellent price-performance ratio. | |
| BYK-1642 | BYK 毕克 | BYK-1642 is a polymer-based, VOC- and silicone-free defoamer for aqueous coatings, printing inks, adhesives, paper coatings, and construction chemicals. Optimum performance at the lowest dosage. | |
| BYK-1745 | BYK 毕克 | BYK-1745 is a VOC- and silicone-free defoamer based on polymers and renewable as well as sustainable raw materials for aqueous adhesives and aqueous architectural coatings. | |
| BYK®-1760 | BYK 毕克 | BYK®-1760 is an emission-free silicone and polymer-containing defoamer and air release agent for solvent-borne and solvent-free coatings, adhesives, sealants and casting resins. Particularly recommended for epoxy resin systems. | |
| BYK®-1789 | BYK 毕克 | BYK®-1789 is a solvent-free, silicone-containing defoamer for aqueous, high build and fast-drying coating systems and adhesives. For improving air release and effectively preventing microfoam. | |
| DAPRO® AP 1622 | Elementis 海名斯特殊化学 | DAPRO® AP 1622 為溶劑系統使用的矽酮改質液態泡沫抑制劑。在不同系統中，具有顯著的消泡性能。具有易於添加在各式溶劑塗料油墨的方便使用特點。 | |
| DAPRO® AP 7015 | Elementis 海名斯特殊化学 | DAPRO® AP 7015 為一具有良好乳化性能的水性消泡劑，具有優異的消泡、抑泡效果。 | |
| DAPRO® AP 7072 | Elementis 海名斯特殊化学 | DAPRO® AP 7072 高效適合用於高品質橡膠應用，且提供極佳的泡沫抑制和消泡性能。DAPRO® AP 7072 在水中極易分散。適用於建築塗料、黏合劑、乳液製備和水墨等水性系統。 | |
| DAPRO® DF 1760 | Elementis 海名斯特殊化学 | DAPRO® DF 1760 是一高效能且不含有機矽長效型消泡劑。即使塗料長期存放後使用，仍可維持其有效的消泡性能。DAPRO® DF 1760 所含的所有非揮發性成分皆符合美國聯邦法規的藥物暨食品管理（FDA）CFR 21 175.105；175.300；176.170 與 176.180 條款的規定。 | |
| DAPRO® DF 21 | Elementis 海名斯特殊化学 | DAPRO® DF 21 is a VOC-free, water dispersible defoamer with excellent application properties. This let down defoamer is effective in high quality waterborne inks, adhesives and aqueous industrial coatings and is particularly useful for gloss paints and c...展開 DAPRO® DF 21 is a VOC-free, water dispersible defoamer with excellent application properties. This let down defoamer is effective in high quality waterborne inks, adhesives and aqueous industrial coatings and is particularly useful for gloss paints and clear acrylic coatings. 收起 | |
| DAPRO® DF 307 | Elementis 海名斯特殊化学 | DAPRO® DF 307 適用於水性油墨和裝飾塗料，對於高光澤和清澈的丙烯酸塗料特別有效。DAPRO® DF 307 提供極佳的儲存穩定性、泡沫抑制性和消泡性能。 | |
| DAPRO® DF 677 | Elementis 海名斯特殊化学 | DAPRO® DF 677 is a high performance defoamer. It is recommended for aqueous inks. | |
| DAPRO® DF 7079 | Elementis 海名斯特殊化学 | DAPRO® DF 7079 為一不含VOC的水性建築塗料用消泡劑。DAPRO® DF 7079 可作為在塗料及漆料中於研磨和調漆階段的消泡劑，能賦予極佳的泡沫控制。在低添加量下，對於半消光和高光澤塗料能提供特別有效地快速破泡的性能。 | |
| DEE FO® 1015 | Munzing Chemie | DEE FO® 1015 is a liquid opaque off-white defoamer that is used for aqueous systems. It provides effectiveness, persistence, stability and high efficiency. It is commonly used for architectural, industrial and wood coatings, as well as printing inks and a...展開 DEE FO® 1015 is a liquid opaque off-white defoamer that is used for aqueous systems. It provides effectiveness, persistence, stability and high efficiency. It is commonly used for architectural, industrial and wood coatings, as well as printing inks and adhesives. 收起 | |
| DEE FO® 2020E/50 | Munzing Chemie | DEE FO® 2020E/50 is a liquid opaque off-white defoamer that is a blend of special wax and mineral oil. It has high persistence and is specifically designed for use in most emulsion systems, including EVA, VA, and acrylic formulations. It is commonly used ...展開 DEE FO® 2020E/50 is a liquid opaque off-white defoamer that is a blend of special wax and mineral oil. It has high persistence and is specifically designed for use in most emulsion systems, including EVA, VA, and acrylic formulations. It is commonly used PSA, laminating, packaging, envelope and construction adhesives. 收起 | |
| DEE FO® 215 | Munzing Chemie | DEE FO® 215 is a liquid opaque off-white defoamer that is a blend of special wax and mineral oil. It is a universal defoamer that is used in a variety of adhesive applications, including PSA, laminating, packaging, envelope, wood glue, construction, and n...展開 DEE FO® 215 is a liquid opaque off-white defoamer that is a blend of special wax and mineral oil. It is a universal defoamer that is used in a variety of adhesive applications, including PSA, laminating, packaging, envelope, wood glue, construction, and natural/neoprene formulations. It is also commonly used in clear, industrial water-based, and high gloss coatings, as well as traffic paints. 收起 | |
| DEE FO® 806-102 | Munzing Chemie | DEE FO® 806-102 is a liquid opaque off-white defoamer that is a blend of hydrophobic silica and mineral oil. It is a defoamer that provides initial and long-term persistence in both the letdown and grind phases. It is commonly used in acrylic, EVA, VA, an...展開 DEE FO® 806-102 is a liquid opaque off-white defoamer that is a blend of hydrophobic silica and mineral oil. It is a defoamer that provides initial and long-term persistence in both the letdown and grind phases. It is commonly used in acrylic, EVA, VA, and latex-based adhesives, as well as in industrial water-based, and wood based coatings, and in traffic paints. 收起 | |
| DEE FO® 97-3 | Munzing Chemie | DEE FO® 97-3 is a liquid opaque off-white defoamer that is a blend of metallic stearate and mineral oil. It is a defoamer that is efficient in pigment dispersing and defoaming metallic inks. It is used in clear and wood coatings, traffic paint, and natura...展開 DEE FO® 97-3 is a liquid opaque off-white defoamer that is a blend of metallic stearate and mineral oil. It is a defoamer that is efficient in pigment dispersing and defoaming metallic inks. It is used in clear and wood coatings, traffic paint, and natural, neoprene, wood glue, construction, envelope, and label adhesives. 收起 | |
| DEE FO® PI-16P | Munzing Chemie | DEE FO® PI-16P is a liquid opaque straw color defoamer that is a blend of special hydrophobic silica and polyoxyalkylene technology. It is an anti-foaming agent, which provides excellent stability and persistence in a wide variety of aqueous formulations....展開 DEE FO® PI-16P is a liquid opaque straw color defoamer that is a blend of special hydrophobic silica and polyoxyalkylene technology. It is an anti-foaming agent, which provides excellent stability and persistence in a wide variety of aqueous formulations. It is commonly used in corrugated, envelope, film and foil, and metallic printing inks, and can be used in PVOH adhesives. 收起 | |
| DEE FO® PI-547 | Munzing Chemie | DEE FO® PI-547 is a liquid translucent straw-colored defoamer that is a blend of hydrophobic silica and polyoxyalkylene technology. It is a defoamer for aqueous systems that is a universal oil free product designed for use in PVOH adhesives, high solids c...展開 DEE FO® PI-547 is a liquid translucent straw-colored defoamer that is a blend of hydrophobic silica and polyoxyalkylene technology. It is a defoamer for aqueous systems that is a universal oil free product designed for use in PVOH adhesives, high solids content coatings and printing ink. It is also used for aqueous ink systems include flexible film, OPV and metallic. 收起 | |
| DEE FO® SC-180 | Munzing Chemie | DEE FO® SC-180 is a liquid translucent off-white defoamer that is a blend of 3-Dimensional siloxane and water. It is a defoamer for aqueous systems that is specially designed for coating applications. It is also commonly used in wood and seed coatings and...展開 DEE FO® SC-180 is a liquid translucent off-white defoamer that is a blend of 3-Dimensional siloxane and water. It is a defoamer for aqueous systems that is specially designed for coating applications. It is also commonly used in wood and seed coatings and adhesives. 收起 | |
| DEE FO® XRM-1547A | Munzing Chemie | DEE FO® XRM-1547A is a liquid translucent straw-colored defoamer that is a blend of hydrophobic silica and polyoxyalkylene technology. It is a defoamer for aqueous systems that is a universal oil-free product designed for use in PVOH adhesives and OPV sys...展開 DEE FO® XRM-1547A is a liquid translucent straw-colored defoamer that is a blend of hydrophobic silica and polyoxyalkylene technology. It is a defoamer for aqueous systems that is a universal oil-free product designed for use in PVOH adhesives and OPV systems. It is also commonly used in printing ink formulations, such as film/foil, envelope and metallic. 收起 | |
| Defoamer EDW | HS CHEM CO.,LTD | Defoamer EDW is a silicone free defoamer designed to prevent and eliminate foaming during and after the manufacturing process for aqueous systems. This product is a yellowish white liquid and is soluble in water. It is often used in emulsion paint, latex ...展開 Defoamer EDW is a silicone free defoamer designed to prevent and eliminate foaming during and after the manufacturing process for aqueous systems. This product is a yellowish white liquid and is soluble in water. It is often used in emulsion paint, latex paint systems, and aqueous latex adhesives. 收起 | |
| Defoamer EDW-707 | HS CHEM CO.,LTD | Defoamer EDW-707 is a silicone free defoamer designed to prevent and eliminate foaming during and after the manufacturing process for aqueous systems. This product is a white liquid and is insoluble in water. It is often used in emulsion paint, latex pain...展開 Defoamer EDW-707 is a silicone free defoamer designed to prevent and eliminate foaming during and after the manufacturing process for aqueous systems. This product is a white liquid and is insoluble in water. It is often used in emulsion paint, latex paint systems, architectural paints, and adhesives. 收起 | |
| Defoamer EDW-709 | HS CHEM CO.,LTD | Defoamer EDW-709 is a silicone free defoamer designed to prevent and eliminate foaming during and after the manufacturing process for aqueous systems. This product is a white liquid and is insoluble in water. It is often used in emulsion paint, latex pain...展開 Defoamer EDW-709 is a silicone free defoamer designed to prevent and eliminate foaming during and after the manufacturing process for aqueous systems. This product is a white liquid and is insoluble in water. It is often used in emulsion paint, latex paint systems, architectural paints, and adhesives. 收起 | |
| Defoamer EDW-S | HS CHEM CO.,LTD | Defoamer EDW-S is a silicone free defoamer designed to prevent and eliminate foaming during and after the manufacturing process for aqueous systems. This product is a yellowish white liquid and is soluble in water. It is often used in emulsion paint, late...展開 Defoamer EDW-S is a silicone free defoamer designed to prevent and eliminate foaming during and after the manufacturing process for aqueous systems. This product is a yellowish white liquid and is soluble in water. It is often used in emulsion paint, latex paint systems, and aqueous latex adhesives. 收起 | |
| Defom 2700 | Elementis 海名斯特殊化学 | Defom 2700 為不含矽酮高分子型消泡、脫泡劑，適用於溶劑型或無溶劑系統。尤其適用於環氧系統、不飽和聚酯及 UV 硬化塗料系統。 | |
| Defom 3100 | Elementis 海名斯特殊化学 | Defom 3100 is a solvent-free silicone defoamer. It is recommended for solvent-based or solvent-free systems. | |
| Defom 3200 | Elementis 海名斯特殊化学 | Defom 3200 为不含硅酮高分子型消泡、脱泡剂，适用于溶剂型或无溶剂型体系。 | |
| Defom 3500 | Elementis 海名斯特殊化学 | Defom 3500 為不含矽酮高分子型消泡、脫泡劑，適用於溶劑型或無溶劑塗料系統。主要為抑制或消除木器底漆因製造過程或內含填充料所導致的氣泡。 | |
| Defom 5300 | Elementis 海名斯特殊化学 | Defom 5300 為改質聚矽氧烷消泡劑。特別對聚胺酯塗料厚膜的氣泡消除效果顯著。 | |
| Defom 5300F | Elementis 海名斯特殊化学 | Defom 5300F is a modified polysiloxane defoamer. It offers remarkable bubble elimination, especially for polyurethane coatings and thick films. | |
| Defom 5400 | Elementis 海名斯特殊化学 | Defom 5400 為改質矽酮脫泡、消泡劑，在聚胺酯塗料厚膜的氣泡消除效果顯著，同時對於淋幕塗裝、滾筒塗裝等塗料的氣泡抑制與消除效果最佳。 | |
| Defom 5500 | Elementis 海名斯特殊化学 | Defom 5500 为适用于溶剂型、无溶剂型反应性固化涂料体系，厚膜涂装的气泡脱除剂。对聚氨酯厚膜的气泡消除效果最优异。 | |
| Defom 5800F | Elementis 海名斯特殊化学 | Defom 5800F 為不含芳香族的溶劑型消泡劑，符合環保規定，廣泛用於溶劑型塗料系統。 | |
| Defom 6500 | Elementis 海名斯特殊化学 | Defom 6500 為改質聚矽氧烷消泡劑，主要作用為脫泡與消泡。 | |
| Defom 6800 | Elementis 海名斯特殊化学 | Defom 6800 為適用於高固成份、高膜厚環氧地板塗料及絲網油墨抑泡、消泡劑。 | |
| Defom W-0506 | Elementis 海名斯特殊化学 | Defom W-0506 为一以乳化聚硅氧烷为主要成份的消泡剂产品。广泛用于水性体系的抑泡、消泡。 | |
| Defom W-074 | Elementis 海名斯特殊化学 | Defom W-074 为有机酯的矿物油系消泡剂﹐可提供优异的抑泡、消泡效果。 | |
| Defom W-086 | Elementis 海名斯特殊化学 | Defom W-086 is a mineral oil-based defoamer which contains hydrophobic particles. It provides excellent foam suppression and anti-foaming effect. | |
| Depol NW-111W | Naewoi Korea Resins | Depol NW-111W is a mineral type defoamer for water based systems. This product is a defoaming additive that prevents bubble and foam during the manufacturing of coatings. Depol NW-111W is used in water based acrylic emulsion systems, water soluble adhesiv...展開 Depol NW-111W is a mineral type defoamer for water based systems. This product is a defoaming additive that prevents bubble and foam during the manufacturing of coatings. Depol NW-111W is used in water based acrylic emulsion systems, water soluble adhesives, and water soluble coatings. 收起 | |
| Depol NW-133 | Naewoi Korea Resins | Depol NW-133 is a polymer type defoamer for solvent based systems. Its main component is a polyvinyl ether with a modified acrylic copolymer. This product helps deaerate during high temperature baking and has no influence on inter-adhesive properties as a...展開 Depol NW-133 is a polymer type defoamer for solvent based systems. Its main component is a polyvinyl ether with a modified acrylic copolymer. This product helps deaerate during high temperature baking and has no influence on inter-adhesive properties as a polymer type. Depol NW-133 is used in alkyd, acrylic and polyester melamine high temperature baking systems, acrylic urethane coatings, solvent and solvent free based epoxy coatings, and acid catalyst and coil coating systems. 收起 | |
| Depol NW-137 | Naewoi Korea Resins | Depol NW-137 is a polymer type defoamer for solvent based systems. Its main component is a vinyl ether with a modified acrylic copolymer. This product improves levelling and anti-flooding and also has no influence on inter-adhesive properties in polymers....展開 Depol NW-137 is a polymer type defoamer for solvent based systems. Its main component is a vinyl ether with a modified acrylic copolymer. This product improves levelling and anti-flooding and also has no influence on inter-adhesive properties in polymers. Depol NW-137 is used in alkyd, acrylic and polyester high temperature baking systems, acrylic lacquer and acrylic urethane coatings, chlorinated rubber and epoxy coatings, and acid catalyst and coil coating systems. 收起 | |
| Depol NW-1640 | Naewoi Korea Resins | Depol NW-1640 is a polymer type defoamer for solvent based systems. Its main component is a polyvinyl ester copolymer. This product has no influence on inter-adhesiveness in polymers and defoams well under low temperatures. Depol NW-1640 is used in solven...展開 Depol NW-1640 is a polymer type defoamer for solvent based systems. Its main component is a polyvinyl ester copolymer. This product has no influence on inter-adhesiveness in polymers and defoams well under low temperatures. Depol NW-1640 is used in solvent and solvent-free epoxy coating systems, solvent and solvent-free urethane coating systems, and industrial baking systems. 收起 | |
| Depol NW-289W | Naewoi Korea Resins | Depol NW-289W is a silicone type defoamer for water based systems. Its main component is a special polymer with a modified polysiloxane. It prevents foam during the manufacturing of coatings and has no influence on gloss or long-time color stability. Depo...展開 Depol NW-289W is a silicone type defoamer for water based systems. Its main component is a special polymer with a modified polysiloxane. It prevents foam during the manufacturing of coatings and has no influence on gloss or long-time color stability. Depol NW-289W is used in acrylic emulsions, water dispersing polyurethane systems, styrene modified acrylic emulsion systems, and water soluble adhesives. 收起 | |
| FOAM BAN® SB-81 | Munzing Chemie | FOAM BAN® SB-81 is a liquid yellow-brown, turbid defoamer that is a blend of hydrophobic silica and mineral oil. It is a defoamer that is used for industrial fluids that is commonly used in industrial, architectural and wood coatings, as well as printing ...展開 FOAM BAN® SB-81 is a liquid yellow-brown, turbid defoamer that is a blend of hydrophobic silica and mineral oil. It is a defoamer that is used for industrial fluids that is commonly used in industrial, architectural and wood coatings, as well as printing inks and adhesives. 收起 | |
| FOAM BAN® SB-88 | Munzing Chemie | FOAM BAN® SB-88 is a liquid yellow-brown, turbid defoamer that is a blend of hydrophobic silica and mineral oil. It is a defoamer for aqueous systems that is commonluy used in industrial, architectural and wood coatings, as well as printing inks and adhes...展開 FOAM BAN® SB-88 is a liquid yellow-brown, turbid defoamer that is a blend of hydrophobic silica and mineral oil. It is a defoamer for aqueous systems that is commonluy used in industrial, architectural and wood coatings, as well as printing inks and adhesives. 收起 | |
| FOAMTROL 105 | Munzing Chemie | FOAMTROL 105 is a translucent grey defoamer for aqueous systems. It is a low viscosity silicone compound that is used in non-aqueous and aqueous products and systems. It is used to prepare silicone-based foam and is also commonly used in adhesives and pri...展開 FOAMTROL 105 is a translucent grey defoamer for aqueous systems. It is a low viscosity silicone compound that is used in non-aqueous and aqueous products and systems. It is used to prepare silicone-based foam and is also commonly used in adhesives and printing inks. 收起 | |
| FOAMTROL 410 | Munzing Chemie | FOAMTROL 410 is a liquid off-white opaque defoamer for aqueous systems that silicone emulsion in water. It is primarily an active, food-grade, silicone emulsion that is used for food-contact approved products and is also used as a defoamer in coatings and...展開 FOAMTROL 410 is a liquid off-white opaque defoamer for aqueous systems that silicone emulsion in water. It is primarily an active, food-grade, silicone emulsion that is used for food-contact approved products and is also used as a defoamer in coatings and adhesives. 收起 | |
| Greesol™ DF11 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ DF11 is a non-silicone, mineral oil-free defoamer. It is characterized as possessing persistent foam suppression. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo inks...展開 Greesol™ DF11 is a non-silicone, mineral oil-free defoamer. It is characterized as possessing persistent foam suppression. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo inks, intaglio inks, OPV, and laminating adhesives. 收起 | |
| Greesol™ DF42 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ DF42 is a silica-based defoamer. This miscible product is well suited for use in paints, inks, emulsion polymerization processes, and adhesive foam control. | |
| Greesol™ DF901 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ DF901 is a miscible polyether modified silicone water-based defoamer. Its content of non-volatile substances is 85%. This product is well suited for the production of fountain solutions, metal cleaners, inkjet inks, adhesives, water-based inks, a...展開 Greesol™ DF901 is a miscible polyether modified silicone water-based defoamer. Its content of non-volatile substances is 85%. This product is well suited for the production of fountain solutions, metal cleaners, inkjet inks, adhesives, water-based inks, and OPV. 收起 | |
| Greesol™ DF975 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ DF975 is a polyether modified silicone water-based defoamer. Its content of non-volatile substances is 100%. This product is well suited for the production of fountain solutions, metal cleaners, inkjet inks, adhesives, water-based inks, and OPV. | |
| Greesol™ DFM | Chem Additive (YueYang) Co.,Ltd. | Greesol™ DFM is a polyether modified silicone water-based defoamer. Its content of non-volatile substances is 60%. This product is well suited for use in the production of fountain solutions, metal cleaners, inkjet inks, adhesives, water-based inks, OPV. | |
| KEPERSURF®-1200 | Kito Chem | KEPERSURF®-1200 is a wetting and defoaming agent made of an alkynedio surfactant. It is a white waxy and sticky substance with a non-ionic structure. It dose not affect water resistance, gloss, transparency, or recoating of the film. This product is well ...展開 KEPERSURF®-1200 is a wetting and defoaming agent made of an alkynedio surfactant. It is a white waxy and sticky substance with a non-ionic structure. It dose not affect water resistance, gloss, transparency, or recoating of the film. This product is well suited for use in the production of water-based and oil-based paints, adhesives and printing inks where good foam inhibition is required. 收起 | |
| KEPERSURF®-1204 | Kito Chem | KEPERSURF®-1204 is a wetting and defoaming agent made of an alkynedio / ethylene oxide copolymer. It is a yellowish liquid that has a non-ionic structure with good compatibility in most systems. And dose not affect water resistance, gloss, transparency or...展開 KEPERSURF®-1204 is a wetting and defoaming agent made of an alkynedio / ethylene oxide copolymer. It is a yellowish liquid that has a non-ionic structure with good compatibility in most systems. And dose not affect water resistance, gloss, transparency or recoating of the film. This product is well suited for use in the production of water-based paints, inks and adhesives with an alcohol solvent. 收起 | |
| Precipitated Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixi...展開 Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixing solutions of sodium silicate with sulfuric acid in water. A chemical reaction occurs, and pellets of pure silica form. 收起 | |
| SILICONE FLUID ATPN-1000 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICO...展開 SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-1000 is ideal for use in a wide range of applications. 收起 | |
| Surfadol® 518 | ACME 艾克米 | Surfadol® 518 is an 18% active liquid nonionic molecular defoamer (ethylene glycol and dipropylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting f...展開 Surfadol® 518 is an 18% active liquid nonionic molecular defoamer (ethylene glycol and dipropylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, and good dynamic wetting. This product is APE-free. 收起 | |
| Surfadol® 520 | ACME 艾克米 | Surfadol® 520 is a 20% active liquid nonionic molecular defoamer (Polyethylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-...展開 Surfadol® 520 is a 20% active liquid nonionic molecular defoamer (Polyethylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, and good dynamic wetting. This product is APE-free. 收起 | |
| Surfadol® 532 | ACME 艾克米 | Surfadol® 532 is a 32% active liquid nonionic molecular defoamer (Dipropylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-f...展開 Surfadol® 532 is a 32% active liquid nonionic molecular defoamer (Dipropylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, and good dynamic wetting. This product is APE-free. 收起 | |
| Surfadol® 532B | ACME 艾克米 | Surfadol® 532B is a 32% active liquid nonionic molecular defoamer (Butyl cellosolve solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-fr...展開 Surfadol® 532B is a 32% active liquid nonionic molecular defoamer (Butyl cellosolve solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, and good dynamic wetting. This product is APE-free. 收起 | |
| Surfadol® 550 | ACME 艾克米 | Surfadol® 550 is a 50% active liquid nonionic molecular defoamer (Butyl cellosolve solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-fre...展開 Surfadol® 550 is a 50% active liquid nonionic molecular defoamer (Butyl cellosolve solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, and good dynamic wetting. This product is APE-free. 收起 | |
| Surfadol® 550P | ACME 艾克米 | Surfadol® 550P is a 50% active liquid nonionic molecular defoamer (Propylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-fr...展開 Surfadol® 550P is a 50% active liquid nonionic molecular defoamer (Propylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, and good dynamic wetting. This product is APE-free. 收起 | |
| Surfadol® DF-59 | ACME 艾克米 | Surfadol® DF-59 is a 100% active liquid nonionic molecular defoamer. It is a mixture of ethoxylated acetylenic diols that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, ...展開 Surfadol® DF-59 is a 100% active liquid nonionic molecular defoamer. It is a mixture of ethoxylated acetylenic diols that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, and good dynamic wetting. This product is solvent and APE-free. 收起 | |
| Surfynol® 107 L | Evonik Operations GmbH, BL Interface & Performance | Surfynol® 107 L is a low-viscosity surfactant that provides substratre wetting and defoaming properties. It also acts as coalescing aid. | |
| Surfynol® DF-110 D | Evonik Operations GmbH, BL Interface & Performance | Surfynol DF-110C, Surfynol DF-110D, 和Surfynol DF-110L分子消泡劑，是高度有效、非離子有機產品。不含硅、硅土或氟產品。這三種消泡/脫氣劑適合各種需要防止起泡或需要消泡而不引起表面缺陷的應用 | |
| Surfynol® DF-110BC Defoamer | Evonik Operations GmbH, BL Interface & Performance | Surfynol® DF-110BC defoamer is a highly effective, nonionic, molecular defoamer and deaerator. This defoaming/deairentraining agent can be used for a wide variety of applications where foam prevention or foam elimination is necessary without causing surfa...展開 Surfynol® DF-110BC defoamer is a highly effective, nonionic, molecular defoamer and deaerator. This defoaming/deairentraining agent can be used for a wide variety of applications where foam prevention or foam elimination is necessary without causing surface defects. 收起 | |
| SURFYNOL® DF-110L | Evonik Operations GmbH, BL Interface & Performance | Surfynol DF-110C, Surfynol DF-110D, 和Surfynol DF-110L分子消泡劑，是高度有效、非離子有機產品。不含硅、硅土或氟產品。這三種消泡/脫氣劑適合各種需要防止起泡或需要消泡而不引起表面缺陷的應用 | |
| Surfynol® DF-178 Defoamer | Evonik Operations GmbH, BL Interface & Performance | Surfynol® DF-178 Defoamer is a formulated defoamer and de-aerator that provides strong defoaming and microfoam control and is particularly effective in spray applications. It is a liquid, 100% active, silicone-based product developed specifically for appl...展開 Surfynol® DF-178 Defoamer is a formulated defoamer and de-aerator that provides strong defoaming and microfoam control and is particularly effective in spray applications. It is a liquid, 100% active, silicone-based product developed specifically for applications in water-borne coatings and graphic arts that demand both powerful defoaming and defect-free surfaces. 收起 | |
| Surfynol® DF-220 Defoamer | Evonik Operations GmbH, BL Interface & Performance | Surfynol® DF-220 Defoamer is a 100% active, silicone-free, silica-free, and alkylphenol ethoxylate (APE)-free organic defoamer that can provide not only high initial efficacy, but also long term sustained defoaming. It is a clear, low viscosity liquid tha...展開 Surfynol® DF-220 Defoamer is a 100% active, silicone-free, silica-free, and alkylphenol ethoxylate (APE)-free organic defoamer that can provide not only high initial efficacy, but also long term sustained defoaming. It is a clear, low viscosity liquid that has been specifically designed to be used in a variety of water-based formulations, including printing inks, coatings and adhesives. 收起 | |
| SURFYNOL® DF-37 | Evonik Operations GmbH, BL Interface & Performance | A nonionic, acetylenic-based defoamer which promotes foam control as well as surface wetting. 100% active liquid. | |
| SURFYNOL® DF-37 DEFOAMER | Evonik Operations GmbH, BL Interface & Performance | 非離子型炔基消泡劑，可增加泡沫控制以及表面潤濕。是一種獨特的助劑，設計用於減少乳膠手套和水性涂料浸涂工藝過程中的結網 | |
| SURFYNOL® DF-58 | Evonik Operations GmbH, BL Interface & Performance | A silicone-based foam control agent useful in aqueous systems. The product has strong foam control and deairation performance. 100% active liquid. | |
| SURFYNOL® DF-58 DEFOAMER | Evonik Operations GmbH, BL Interface & Performance | 含硅泡沫控制劑，適合水性體系。它具有強泡沫控制和除氣作用。開發用於需要強而快消泡的水性涂料和油墨配方。含100%活性物的液體 | |
| SURFYNOL® DF-62 | Evonik Operations GmbH, BL Interface & Performance | An ether-modified polysiloxane-based defoamer designed to provide excellent knockdown defoaming and sustained antifoaming over time. 100% active liquid. | |
| SURFYNOL® DF-62 DEFOAMER | Evonik Operations GmbH, BL Interface & Performance | 醚改性硅消泡劑，可為各種水性配方提供出色的破泡消泡和長時間持續防起泡作用。當需要消泡劑起長期消泡作用時非常有用。含100%活性物的液體 | |
| SURFYNOL® DF-66 DEFOAMER | Evonik Operations GmbH, BL Interface & Performance | 液體、炔改性聚硅氧烷基乳液消泡劑，它可提供出色的初始破泡和持續消泡作用，無副作用。設計用於水性油墨和涂料體系。含46%活性物的液體 | |
| SURFYNOL® DF-695 | Evonik Operations GmbH, BL Interface & Performance | A silicone emulsion defoamer, which provides initial and sustained defoaming performance in water-based formulations. 100% active liquid. | |
| SURFYNOL® DF-695 DEFOAMER | Evonik Operations GmbH, BL Interface & Performance | 含硅乳液消泡劑，適合水性油墨體系。推薦用於碾磨和分散以及稀釋應用。含100%活性物的液體 | |
| SURFYNOL® MD-600S | Evonik Operations GmbH, BL Interface & Performance | 高效粉末產品，設計用於消除建筑工業水泥質產品中的滯留空氣。它也可在分子水平快速起消泡作用並長期脫泡。它也可確保當水加入和混合時滯留空氣的快速脫出 | |
| Surfynol® MD20 | Evonik Operations GmbH, BL Interface & Performance | 100%活性物,不含硅,液態產品，基於雙子表面活性劑技術.該多功能消泡劑對於消除微泡和其它泡沫引起的缺陷尤為有效 | |
| TOYNOL® DF-110B | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-110B, in the form of a clear, pale yellow liquid, is a macromolecular acetylenic diol. This product is a defoamer that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other us...展開 TOYNOL® DF-110B, in the form of a clear, pale yellow liquid, is a macromolecular acetylenic diol. This product is a defoamer that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other uses. It contains 50% active content and its flash point starts above 80℃. 收起 | |
| TOYNOL® DF-220 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-220, in the form of an emulsion liquid, is a polyether defoamer. This product can be used in water-based adhesives, water-based printing inks, water-based automotive coatings, and paper coatings. It contains 100% active content and is dispers...展開 TOYNOL® DF-220, in the form of an emulsion liquid, is a polyether defoamer. This product can be used in water-based adhesives, water-based printing inks, water-based automotive coatings, and paper coatings. It contains 100% active content and is dispersed in water. 收起 | |
| TOYNOL® DF-220M | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-220M, in the form of an emulsion liquid, is a polyether defoamer. This product can be used in water-based adhesives, water-based printing inks, water-based automotive coatings, and paper coatings. It contains 50% active content and is dispers...展開 TOYNOL® DF-220M, in the form of an emulsion liquid, is a polyether defoamer. This product can be used in water-based adhesives, water-based printing inks, water-based automotive coatings, and paper coatings. It contains 50% active content and is dispersed in water. 收起 | |
| TOYNOL® DF-220S | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-220S, in the form of an emulsion liquid, is a polyether defoamer. This product can be used in water-based adhesives, water-based printing inks, water-based automotive coatings, and paper coatings. It contains 20% active content and is dispers...展開 TOYNOL® DF-220S, in the form of an emulsion liquid, is a polyether defoamer. This product can be used in water-based adhesives, water-based printing inks, water-based automotive coatings, and paper coatings. It contains 20% active content and is dispersed in water. 收起 |
