UL Prospector

成功!

成功保存搜索結果
Request Sample Baybond® PU 330 Covestro (formerly Bayer MaterialScience) 科思创 陰離子,非離子聚酯型聚氨酯聚合物,在玻璃纖維浸潤劑中用作成膜組份
Request Sample Baybond® PU 403 Covestro (formerly Bayer MaterialScience) 科思创 陰離子,非離子聚酯型聚氨酯聚合物,在玻璃纖維浸潤劑中用作成膜組份
Request Sample Baybond® PU 405 Covestro (formerly Bayer MaterialScience) 科思创 Baybond® PU 405 is an anionic/non-ionic crosslinking polyether urethane polymer used as the film-forming component in glass fibre sizes. This product becomes milky white when dispersed in water. This product has a non-volatile content (0.9-1.1g / 1h / 125...展開 Baybond® PU 405 is an anionic/non-ionic crosslinking polyether urethane polymer used as the film-forming component in glass fibre sizes. This product becomes milky white when dispersed in water. This product has a non-volatile content (0.9-1.1g / 1h / 125°C, convection oven) of 32-35, a flow time at 23°C, (4mmcup) of 11-18, and a pH value 20°C (supply form) of 6.0-8.0. Baybond® PU 405 was developed for the sizing of glass fibres used to reinforce thermoplastics, particularly polyamide. Glass fibre sizes based on Baybond® PU 405 are characterised by their outstanding film-forming properties and very good adhesion. They have very good colourfastness, even at high temperatures. The mechanical film properties of the product are developed fully by post-crosslinking at temperatures from 170°C for a duration of 20 minutes. Baybond® PU 405 is also highly resistant to shear forces and hydrolysis. 收起
Request Sample Baybond® PU 406 Covestro (formerly Bayer MaterialScience) 科思创 Baybond® PU 406 is a non-ionic polyurethane polymer used as the film-forming component in glass fiber sizes. This product displays a milky white dispersion in water. It has a non-volatile content (0.9-1.1g / 1h / 125°C, convection oven) of 34.5 ± 1.5, a f...展開 Baybond® PU 406 is a non-ionic polyurethane polymer used as the film-forming component in glass fiber sizes. This product displays a milky white dispersion in water. It has a non-volatile content (0.9-1.1g / 1h / 125°C, convection oven) of 34.5 ± 1.5, a flow time at 23°C, (4mmcup) of 10-22, and a pH value at 20°C, (supply form) of 5.5-7.5. 收起
Request Sample Baybond® PU 407 Covestro (formerly Bayer MaterialScience) 科思创 Baybond® PU 407 is an anionic/non-ionic polyester urethane polymer, that can be used as the film-forming component in glass fiber sizes. This product is has milky white dispersion in water. This product has a non-volatile content (0.9-1.1g / 1h / 125°C, c...展開 Baybond® PU 407 is an anionic/non-ionic polyester urethane polymer, that can be used as the film-forming component in glass fiber sizes. This product is has milky white dispersion in water. This product has a non-volatile content (0.9-1.1g / 1h / 125°C, convection oven) of 40 ± 1, a flow time at 23°C, (4mmcup) of 11 - 18, and has a pH value 20°C (supply form) of 6.3 - 7.7. Baybond® PU 407 is particularly well suited for the sizing of glass fibers used to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® PU 407 are characterized by their outstanding film-forming properties and very good adhesion. They have high colorfastness, even at elevated temperatures. It is also stable against shear forces. 收起
Request Sample Bayhydrol® U 241 Covestro (formerly Bayer MaterialScience) 科思创 Bayhydrol® U 241 is a polyester polyurethane dispersion used in the formulation of stoving industrial coatings, stoving automotive primer surfaces and two-pack polyurethane primers and top coats for plastics. This product has an OH content, solvent-free o...展開 Bayhydrol® U 241 is a polyester polyurethane dispersion used in the formulation of stoving industrial coatings, stoving automotive primer surfaces and two-pack polyurethane primers and top coats for plastics. This product has an OH content, solvent-free of approx. 2.5, a minimum film-forming temperature MFT of approx. 0, and a mean particle size of approx. 50. Bayhydrol® U 241 is a polyester-polyurethane dispersion neutralized with dimethyl ethanol amine which is resistant to hydrolysis. The product can be diluted with water for application and shows no dilution anomalies. Bayhydrol® U 241 can be combined with partially methylated melamine resins to formulate water-dilutable stoving coatings and primers which cure at approx. 120°C. 收起
Request Sample Bayhydrol® U 355 Covestro (formerly Bayer MaterialScience) 科思创 Bayhydrol® U 355 is an aliphatic, hydroxyfunctional polyester polyurethane dispersion that is used as binders for the formulation of water-thinnable soft-feel coatings. This product has a viscosity at 23°C, (D = approx. 240 s-1) of 250-650, a non-volatile...展開 Bayhydrol® U 355 is an aliphatic, hydroxyfunctional polyester polyurethane dispersion that is used as binders for the formulation of water-thinnable soft-feel coatings. This product has a viscosity at 23°C, (D = approx. 240 s-1) of 250-650, a non-volatile content (1g / 1h / 125°C) of 53-57, and a pH (10% in water) value of 7.0-7.5. Bayhydrol® U 355 can be combined with flexible polyurethane dispersions, e.g. Bayhydrol® UH 240 and UH 340/1, to formulate soft-feel and suede-effect coatings. This product's suitable polyisocyanate components are Bayhydur® 3100, Bayhydur® VP LS 2306 and Bayhydur® VP LS 2319. 收起
Request Sample Bayhydrol® U XP 2755 Covestro (formerly Bayer MaterialScience) 科思创 Bayhydrol® U XP 2755 is an solvent-free, aqueous hydroxyfunctional polyester-polyurethane dispersion. When combined with aliphatic polyisocyanates, it is well suited for the formulation of glossy and matte clear 2K polyurethane coatings, as well as pigmen...展開 Bayhydrol® U XP 2755 is an solvent-free, aqueous hydroxyfunctional polyester-polyurethane dispersion. When combined with aliphatic polyisocyanates, it is well suited for the formulation of glossy and matte clear 2K polyurethane coatings, as well as pigmented coatings. This product provides coatings with very good film transparency, high wood warmth, fast drying, high hardness, and long pot life. 收起
Request Sample Bayhydrol® U XP 2766 Covestro (formerly Bayer MaterialScience) 科思创 Bayhydrol® U XP 2766 is a hydroxyfunctional polyester-polyurethane dispersion which can be thinned with water to application viscosity. It is a binder for the formulation of water-reducible 2K-PUR coatings, and is an anionic, hydroxyfunctional polyester-p...展開 Bayhydrol® U XP 2766 is a hydroxyfunctional polyester-polyurethane dispersion which can be thinned with water to application viscosity. It is a binder for the formulation of water-reducible 2K-PUR coatings, and is an anionic, hydroxyfunctional polyester-polyurethan dispersion, that is solvent-free. This product has an acid number of approx. 11, a density at 20°C of approx. 1.06, and an OH content (solid resin) of approx. 4.0. Bayhydrol® U XP 2766 is a hydroxyfunctional polyester-polyurethan dispersion which can be thinned with water to application viscosity. In combination with hydrophobic polyisocyanates (e.g. Desmodur® N 3600, N 3900 , XP 2730) and/or with hydrophilic polyisocyanates (e.g. Bayhydur 3100, 304, 305, XP 2487/1, XP 2655) high performance, hard-elastic two-component polurethane-hydrocoatings can be formulated. 收起
Request Sample CO-RESIN 02-819/M22 Rahn AG GENOMER 1122中的惰性樹脂。用於自由基固化油墨、涂料和粘膠。
DMPA® Polyol HA-0135 GEO Specialty Chemicals, Inc. TRIMET Products Group 是一種DMPA CHDA BDO己二酸聚酯樹脂,98%不揮發組分。它可作為水性體系的酸官能團來源和作為共樹脂改進顏料的潤濕、分散和穩定。
Request Sample DYNAPOL® L 205 Evonik Resource Efficiency GmbH – Coating & Adhesive Resins DYNAPOL® L 205 is a saturated, high molecular, linear co-polyester. It is recommended for use in coil coatings as a primer for hot dip galvanized steel, and may also be used for aluminium primers and appliance finishing. In can coatings, it may be used fo...展開 DYNAPOL® L 205 is a saturated, high molecular, linear co-polyester. It is recommended for use in coil coatings as a primer for hot dip galvanized steel, and may also be used for aluminium primers and appliance finishing. In can coatings, it may be used for metal decorating enamels and interior can coatings. 收起
Request Sample DYNAPOL® L 208 Evonik Resource Efficiency GmbH – Coating & Adhesive Resins DYNAPOL® L 208 is a saturated, high molecular, branched co-polyester. It is recommended for use in coil coating applications such as primers for hot dip galvanized steel and hot laminating adhesives. This product may also be suitable for can coating appli...展開 DYNAPOL® L 208 is a saturated, high molecular, branched co-polyester. It is recommended for use in coil coating applications such as primers for hot dip galvanized steel and hot laminating adhesives. This product may also be suitable for can coating applications like foil primers and printing inks. 收起
Request Sample DYNAPOL® L 210 Evonik Resource Efficiency GmbH – Coating & Adhesive Resins DYNAPOL® L 210 is a saturated, high molecular, linear co-polyester. It is recommended for use in coil coatings for hot laminating adhesives. In can coatings, it is recommended for foil primers and printing inks, and may also be used for heat sealing lacqu...展開 DYNAPOL® L 210 is a saturated, high molecular, linear co-polyester. It is recommended for use in coil coatings for hot laminating adhesives. In can coatings, it is recommended for foil primers and printing inks, and may also be used for heat sealing lacquers. 收起
Request Sample DYNAPOL® L 323 Evonik Resource Efficiency GmbH – Coating & Adhesive Resins DYNAPOL® L 323 is a saturated, high molecular, linear co-polyester. It is recommended for use in can coating applications such as adhesion promoters. This product may also be suitable for metal decorating enamels, foil primers, printing inks, and heat sea...展開 DYNAPOL® L 323 is a saturated, high molecular, linear co-polyester. It is recommended for use in can coating applications such as adhesion promoters. This product may also be suitable for metal decorating enamels, foil primers, printing inks, and heat sealing lacquers. 收起
Request Sample DYNAPOL® L 651 Evonik Resource Efficiency GmbH – Coating & Adhesive Resins DYNAPOL® L 651 is a saturated, high molecular, linear co-polyester. It is recommended for use in can coatings, especially for interior can coatings and adhesion promoters. It may also be used for metal decorating enamels and heat sealing lacquers.
Request Sample DYNAPOL® L 658 Evonik Resource Efficiency GmbH – Coating & Adhesive Resins DYNAPOL® L 658 is a saturated, high molecular, branched co-polyester. It is recommended for use in can coating applications such as interior can coatings. This product may also be suitable for metal decorating enamels.
Request Sample DYNAPOL® L 850 Evonik Resource Efficiency GmbH – Coating & Adhesive Resins DYNAPOL® L 850 is a saturated, high molecular, linear co-polyester. It is recommended for use in coil coating applications such as elastification resins. This product is also recommended for tube-and aerosol can coatings, and may be suitable for metal dec...展開 DYNAPOL® L 850 is a saturated, high molecular, linear co-polyester. It is recommended for use in coil coating applications such as elastification resins. This product is also recommended for tube-and aerosol can coatings, and may be suitable for metal decorating enamels. 收起
Request Sample DYNAPOL® L 907 Evonik Resource Efficiency GmbH – Coating & Adhesive Resins DYNAPOL® L 907 is a saturated, high molecular, linear co-polyester. It is recommended for use in interior can coating applications. This product may also be used for metal decorating enamels.
Request Sample DYNAPOL® L 914 Evonik Resource Efficiency GmbH – Coating & Adhesive Resins DYNAPOL® L 914 is a saturated, high molecular, linear co-polyester. It is recommended for use in interior can coating applications. This product may also be used for metal decorating enamels.
Request Sample DYNAPOL® LH 318-02 Evonik Resource Efficiency GmbH – Coating & Adhesive Resins DYNAPOL® LH 318-02 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coatings such as interior can coatings. This product may also be suitable for primers for metal decorating enamels.
Request Sample DYNAPOL® LH 538-02 Evonik Resource Efficiency GmbH – Coating & Adhesive Resins DYNAPOL® LH 538-02 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially exterior architecture, appliance finishing, and traffic applications.
Request Sample DYNAPOL® LH 724-24 Evonik Resource Efficiency GmbH – Coating & Adhesive Resins DYNAPOL® LH 724-24 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially exterior and interior architecture. This product may also be suitable for appliance finishing and t...展開 DYNAPOL® LH 724-24 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially exterior and interior architecture. This product may also be suitable for appliance finishing and traffic uses. 收起
Request Sample DYNAPOL® LH 727-02 Evonik Resource Efficiency GmbH – Coating & Adhesive Resins DYNAPOL® LH 727-02 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially for back coatings.
Request Sample DYNAPOL® LH 744-23 Evonik Resource Efficiency GmbH – Coating & Adhesive Resins DYNAPOL® LH 744-23 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially for exterior architecture.
Request Sample DYNAPOL® LH 773-01 Evonik Resource Efficiency GmbH – Coating & Adhesive Resins DYNAPOL® LH 773-01 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for can coating applications, especially metal decorating enamels and tube- and aerosol can coatings.
Request Sample DYNAPOL® LH 775-52 Evonik Resource Efficiency GmbH – Coating & Adhesive Resins DYNAPOL® LH 775-52 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for can coating applications, especially metal decorating enamels. It may also be used for tube and aerosol can coatings.
Request Sample DYNAPOL® LH 815-05 Evonik Resource Efficiency GmbH – Coating & Adhesive Resins DYNAPOL® LH 815-05 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coatings such as metal decorating enamels, interior can coatings, and tube and aerosol can coatings. This product may also be suitable ...展開 DYNAPOL® LH 815-05 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coatings such as metal decorating enamels, interior can coatings, and tube and aerosol can coatings. This product may also be suitable for coil coating applications such as primers for hot dip galvanized steel and primers for aluminium. 收起
Request Sample DYNAPOL® LH 820-16 Evonik Resource Efficiency GmbH – Coating & Adhesive Resins DYNAPOL® LH 820-16 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as primers for hot dip galvanized steel. This product may also be suitable for appliance finishing applications.
Request Sample DYNAPOL® LH 822-01 Evonik Resource Efficiency GmbH – Coating & Adhesive Resins DYNAPOL® LH 822-01 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coating applications such as interior architecture and for traffic uses. This product may also be suitable for appliance finishing app...展開 DYNAPOL® LH 822-01 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coating applications such as interior architecture and for traffic uses. This product may also be suitable for appliance finishing applications. 收起
Request Sample DYNAPOL® LH 823-01 Evonik Resource Efficiency GmbH – Coating & Adhesive Resins DYNAPOL® LH 823-01 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for can coating applications, especially for tube and aerosol can coatings. This product may also be suitable for metal decorating enamels.
Request Sample DYNAPOL® LH 824-16 Evonik Resource Efficiency GmbH – Coating & Adhesive Resins DYNAPOL® LH 824-16 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as primers for hot dip galvanized steel. This product may also be suitable for appliance finishing applications.
Request Sample DYNAPOL® LH 826-05/A Evonik Resource Efficiency GmbH – Coating & Adhesive Resins DYNAPOL® LH 826-05/A is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coatings such as metal decorating enamels, and coil coatings such as interior architecture. This product may be suitable for other co...展開 DYNAPOL® LH 826-05/A is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coatings such as metal decorating enamels, and coil coatings such as interior architecture. This product may be suitable for other coil coating applications, such as appliance finishing, primers for hot dip galvanized steel, and primers for aluminium. 收起
Request Sample DYNAPOL® LH 828-24 Evonik Resource Efficiency GmbH – Coating & Adhesive Resins DYNAPOL® LH 828-24 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as interior architecture and back coatings. This product may also be suitable for exterior architecture and traffic uses...展開 DYNAPOL® LH 828-24 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as interior architecture and back coatings. This product may also be suitable for exterior architecture and traffic uses. 收起
Request Sample DYNAPOL® LH 830-02 Evonik Resource Efficiency GmbH – Coating & Adhesive Resins DYNAPOL® LH 830-02 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for can coating applications, especially metal decorating enamels and tube- and aerosol can coatings. This product is also recommended for co...展開 DYNAPOL® LH 830-02 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for can coating applications, especially metal decorating enamels and tube- and aerosol can coatings. This product is also recommended for coil coating applications such as exterior and interior architecture, appliance finishing, and traffic uses. 收起
Request Sample DYNAPOL® LH 832-02 Evonik Resource Efficiency GmbH – Coating & Adhesive Resins DYNAPOL® LH 832-02 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially exterior and interior architecture, appliance finishing, and traffic uses.
Request Sample DYNAPOL® LH 833-03 Evonik Resource Efficiency GmbH – Coating & Adhesive Resins DYNAPOL® LH 833-03 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially primers for hot dip galvanized steel and primers for aluminium. It may also be suitable for applian...展開 DYNAPOL® LH 833-03 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially primers for hot dip galvanized steel and primers for aluminium. It may also be suitable for appliance finishing and for metal decorating enamels. 收起
Request Sample DYNAPOL® LH 834-02 Evonik Resource Efficiency GmbH – Coating & Adhesive Resins DYNAPOL® LH 834-02 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as interior and exterior architecture. This product may also be suitable for appliance finishing applications.
Request Sample DYNAPOL® LH 838-02 Evonik Resource Efficiency GmbH – Coating & Adhesive Resins DYNAPOL® LH 838-02 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as interior and exterior architecture. This product may also be suitable for traffic uses and for can coating applicatio...展開 DYNAPOL® LH 838-02 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as interior and exterior architecture. This product may also be suitable for traffic uses and for can coating applications like metal decorating enamels. 收起
Request Sample DYNAPOL® LH 874-26 Evonik Resource Efficiency GmbH – Coating & Adhesive Resins DYNAPOL® LH 874-26 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as interior architecture. This product may also be suitable for appliance finishing and for back coatings.
Request Sample DYNAPOL® LH 898-14 Evonik Resource Efficiency GmbH – Coating & Adhesive Resins DYNAPOL® LH 898-14 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as interior and exterior architecture. This product may also be suitable for traffic uses.
Request Sample DYNAPOL® LS 4131-10 Evonik Resource Efficiency GmbH – Coating & Adhesive Resins DYNAPOL® LS 4131-10 is a saturated, medium molecular, linear, highly elastified, hydroxylated co-polyester resin. It is recommended for coil coatings for traffic uses and for can coatings such as foil primers and printing inks. Other can coating applicati...展開 DYNAPOL® LS 4131-10 is a saturated, medium molecular, linear, highly elastified, hydroxylated co-polyester resin. It is recommended for coil coatings for traffic uses and for can coatings such as foil primers and printing inks. Other can coating applications for this product may include adhesion promoters and heat sealing lacquers. 收起
Request Sample DYNAPOL® LS 436-12 Evonik Resource Efficiency GmbH – Coating & Adhesive Resins DYNAPOL® LS 436-12 is a saturated, medium molecular, linear, highly elastified, hydroxylated co-polyester resin. It is recommended for coil coating applications such as interior and exterior architecture. This product may also be suitable for can coatings...展開 DYNAPOL® LS 436-12 is a saturated, medium molecular, linear, highly elastified, hydroxylated co-polyester resin. It is recommended for coil coating applications such as interior and exterior architecture. This product may also be suitable for can coatings, including heat sealing lacquers. 收起
Request Sample DYNAPOL® P 1500 Evonik Resource Efficiency GmbH – Coating & Adhesive Resins DYNAPOL® P 1500 is a saturated, high molecular, semi-crystallin, linear co-polyester resin. It is recommended for thermoplastic applications.
Request Sample DYNAPOL® Terra 125 Evonik Resource Efficiency GmbH – Coating & Adhesive Resins DYNAPOL® Terra 125 is a saturated, medium molecular, linear, highly elastified, hydroxylated co-polyester resin. It is recommended for can coating applications such as lacquers for aluminium foils and interior can coatings. It is also recommended for coil...展開 DYNAPOL® Terra 125 is a saturated, medium molecular, linear, highly elastified, hydroxylated co-polyester resin. It is recommended for can coating applications such as lacquers for aluminium foils and interior can coatings. It is also recommended for coil coatings such as exterior and interior architecture, and may also be suitable for appliance finishing applications. 收起
Request Sample DYNAPOL® Terra 127-03 Evonik Resource Efficiency GmbH – Coating & Adhesive Resins DYNAPOL® Terra 125 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coating applications such as lacquers for aluminium foils and interior can coatings. It is also recommended for coil coatings such as e...展開 DYNAPOL® Terra 125 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coating applications such as lacquers for aluminium foils and interior can coatings. It is also recommended for coil coatings such as exterior and interior architecture, and may also be suitable for primers for hot dip galvanized steel and primers for aluminium. 收起
Request Sample Desmodur® 44 M Flakes Covestro (formerly Bayer MaterialScience) 科思创 單體二苯甲烷-4,4'-二異氰酸酯,適用於膠粘劑和聚氨酯涂料樹脂配方
Request Sample Desmophen® 1100 Covestro (formerly Bayer MaterialScience) 科思创 一種無溶劑型飽和聚酯樹脂,用於透明和著色雙組分聚氨酯涂料。
Request Sample Desmophen® 1200 BA Covestro (formerly Bayer MaterialScience) 科思创 Desmophen® 1200 BA和更高枝化Desmophen®牌號的透明有色的混合物,可與 Desmodur® L, HL和IL反應配制金屬、木器和各種塑料用塗料
Request Sample Desmophen® 1300 BA Covestro (formerly Bayer MaterialScience) 科思创 聚酯多元醇,用作聚氨酯的共反應物,用於自干型雙組分涂料配方。
Request Sample Desmophen® 1300 EA Covestro (formerly Bayer MaterialScience) 科思创 一種聚酯多元醇,用作與聚異氰酸酯的共反應物,用於自干型雙組分涂料的配方。
Request Sample Desmophen® 1300 PR 75 X Covestro (formerly Bayer MaterialScience) 科思创 聚酯多元醇,用作聚氨酯的共反應物,用於自干型雙組分涂料配方。
Request Sample Desmophen® 1300 X Covestro (formerly Bayer MaterialScience) 科思创 聚酯多元醇,用作聚氨酯的共反應物,用於自干型雙組分涂料配方。
Request Sample Desmophen® 1388 EA Covestro (formerly Bayer MaterialScience) 科思创 脂肪酸改性飽和聚酯樹脂,作為與Desmodur® L 75、IL、HL和N 75的共反應物,用於雙組分聚氨酯涂料的配方。
Request Sample Desmophen® 1400 PR 75% MIBK Covestro (formerly Bayer MaterialScience) 科思创 非幹性脂肪酸改性聚酯,適合作為多異氰酸酯的共反應劑用於配制自幹雙組份聚氨酯塗料
Request Sample Desmophen® 1652 Covestro (formerly Bayer MaterialScience) 科思创 線性羥基聚酯,用於配置柔韌性PU涂料。
Request Sample Desmophen® 1700 Covestro (formerly Bayer MaterialScience) 科思创 一種不含溶劑的支鏈飽和聚酯樹脂,通常僅作為一種可塑性樹脂與其它聚酯配合使用。可溶於芳烴,但不溶於脂肪烴。
Request Sample Desmophen® 1800 Covestro (formerly Bayer MaterialScience) 科思创 無溶劑型飽和聚酯樹脂,用於柔韌性聚氨酯涂料配方、粘膠和泡沫塑料。
Request Sample Desmophen® 631 MPA Covestro (formerly Bayer MaterialScience) 科思创 Desmophen® 631 MPA is a saturated polyester resin.
Request Sample Desmophen® 650 MPA Covestro (formerly Bayer MaterialScience) 科思创 枝化羥基聚酯,通常用作Desmodur N 75的共反應物,制備耐褪色和耐候的雙組份聚氨酯涂料
Request Sample Desmophen® 650A 65 PMA Covestro (formerly Bayer MaterialScience) 科思创 Desmophen® 650A 65 PMA is a saturated polyester resin that is used as a coreactant for Desmodur N polyisocyanates two-component polyurethane coatings.
Request Sample Desmophen® 651 MPA Covestro (formerly Bayer MaterialScience) 科思创 枝化羥基聚酯,通常用作Desmodur N 75的共反應物,制備耐褪色和耐候的雙組份涂料
Request Sample Desmophen® 651 MPA/X Covestro (formerly Bayer MaterialScience) 科思创 枝化羥基聚酯,通常用作Desmodur N 75的共反應物,制備耐褪色和耐候的雙組份涂料
Request Sample Desmophen® 670 Covestro (formerly Bayer MaterialScience) 科思创 輕度支鏈化的羥基聚酯,通常用作Desmodur N 75和N 3390的共反應劑,用來配置柔韌的耐侯性能穩定的涂料。
Request Sample Desmophen® 670 BA Covestro (formerly Bayer MaterialScience) 科思创 輕度支鏈化的羥基聚酯,主要用作Desmodur N 75和N 3390的共反應劑,用來配置耐侯性能穩定的柔韌性涂料。
Request Sample Desmophen® 680 BA Covestro (formerly Bayer MaterialScience) 科思创 羥基聚酯,主要用作Desmodur N的共反應物,用來配置雙組分聚氨酯涂料,具有出色的光澤保持性、耐光照和抗粉化特性。也可與Desmodur L和HL聯合用於配置快干型雙組分涂料。
Request Sample Desmophen® 680 X Covestro (formerly Bayer MaterialScience) 科思创 羥基聚酯,主要用作Desmodur N的共反應物,用來配置雙組分聚氨酯涂料,具有出色的光澤保持性、耐光照和抗粉化特性。也可與Desmodur L和HL聯合用於配置快干型雙組分涂料。
Request Sample Desmophen® 690 MPA Covestro (formerly Bayer MaterialScience) 科思创 枝化羥基聚酯,通常作為不褪色和耐候的雙組份聚氨酯涂料體系中的多醇組份
Request Sample Desmophen® 800 Covestro (formerly Bayer MaterialScience) 科思创 無溶劑型飽和聚酯樹脂,與Desmodur CB芳香族聚氨酯聯合用於配置雙組分聚氨酯涂料。
Request Sample Desmophen® 800 80% BA Covestro (formerly Bayer MaterialScience) 科思创 高枝化聚酯,含羥基基團,可用於配制雙組份聚氨酯塗料
Request Sample Desmophen® 800 EA Covestro (formerly Bayer MaterialScience) 科思创 高枝化聚酯,含羥基基團,可用於配制快幹雙組份聚氨酯塗料
Request Sample Desmophen® 800 MPA Covestro (formerly Bayer MaterialScience) 科思创 高度支鏈化的羥基聚酯,用來配置雙組分聚氨酯涂料。
Request Sample Desmophen® 850 Covestro (formerly Bayer MaterialScience) 科思创 線性羥基聚酯,與其它等級的Desmophen聯合用於配置雙組分PU涂料。
Request Sample Desmophen® C 1100 Covestro (formerly Bayer MaterialScience) 科思创 線性脂肪族聚碳酸酯聚酯,可用作各種聚氨酯體系的優質基礎組份
Request Sample Desmophen® C 1200 Covestro (formerly Bayer MaterialScience) 科思创 線性脂肪族聚碳酸酯聚酯。用作高級柔韌性涂料和封閉劑的主體樹脂。
Request Sample Desmophen® C 2100 Covestro (formerly Bayer MaterialScience) 科思创 線性羥基封端的脂肪族聚碳酸酯二醇,分子量約為1,000 g/mol
Request Sample Desmophen® C XP 2716 Covestro (formerly Bayer MaterialScience) 科思创 線性羥基封端的脂肪族聚碳酸酯二醇,分子量約為650 g/mol
Request Sample Desmophen® PL 300 X Covestro (formerly Bayer MaterialScience) 科思创 脂肪酸改性的聚酯樹脂,用作多異氰酸酯的共反應劑配制工業木器塗料的自幹雙組份塗料
Request Sample Desmophen® PL 800 Covestro (formerly Bayer MaterialScience) 科思创 脂肪酸改性聚酯樹脂,具有低分子量,可作為共反應劑與多異氰酸酯(Desmodur® HL, IL, L或N)配制自幹雙組份塗料,用於工業木器漆
Request Sample Desmophen® PL 817 Covestro (formerly Bayer MaterialScience) 科思创 非幹性脂肪酸改性聚酯,可作為多異氰酸酯的共反應劑用於配制自幹雙組份工業木器塗料
Request Sample Desmophen® T 1665 SN/IB Covestro (formerly Bayer MaterialScience) 科思创 無油羥基飽和聚酯,與氨基或交聯烘干聚氨酯樹脂聯合用於配置烘干涂料,例如底漆、汽車表面打底材料、卷材涂料和一般工業涂料,具有良好的耐侯穩定性。
Request Sample Desmophen® T 1775 SN Covestro (formerly Bayer MaterialScience) 科思创 無油,含羥基聚酯,用於制備耐褪色的單組分聚氨酯烤漆
Request Sample Desmophen® VP LS 2249/1 Covestro (formerly Bayer MaterialScience) 科思创 枝化短鏈聚酯多醇,可作為基料用於高品質堅硬且耐候的塗料和裝飾礫石
Request Sample Desmophen® VP LS 2328 Covestro (formerly Bayer MaterialScience) 科思创 線性短鏈聚酯多醇,可作為基料用於高品質高固體份或不含溶劑的柔韌的雙組份塗料
Request Sample Desmophen® VP LS 2388 Covestro (formerly Bayer MaterialScience) 科思创 柔性含羥基聚酯,可作為共反應劑,與Desmodur® N反應配制雙組份聚氨酯塑膠塗料,特性是良好的耐加速試驗和戶外耐候性、高塗膜彈性和良好的耐刮擦性,也可用於例如工業應用堅硬塗料的柔韌化
Request Sample GENOMER* 3611 Rahn AG 脂肪酸改性的聚酯丙烯酸酯。作為可自由基固化的油墨,涂料和膠粘劑用樹脂。推薦用於需要高反應活性和良好顏料潤濕性的應用中。具有非常好的顏料潤濕性,高反應活性,良好的耐刮擦性能和耐溶劑性能,高耐磨性和非常好的平版印刷效果。
Request Sample GENOMER* 4312TF Rahn AG GENOMER* 4312TF is an aliphatic polyester urethane acrylate. It offers excellent reactivity, especially in pigmented systems. It also imparts good abrasion and solvent resistance, low odor, and good flexibility. This product is recommended for printing in...展開 GENOMER* 4312TF is an aliphatic polyester urethane acrylate. It offers excellent reactivity, especially in pigmented systems. It also imparts good abrasion and solvent resistance, low odor, and good flexibility. This product is recommended for printing inks and varnishes, varnishes for paper, board, and plastics, for wood and industrial coatings, and for adhesives. 收起
Request Sample GENOMER* 6043/M22 Rahn AG 改性飽和聚酯樹脂。用於自由基固化油墨、涂料和粘膠的樹脂。
Request Sample GENOMER* 6050/GP Rahn AG GENOMER 1343 (GPTA)中的改性聚酯樹脂。用於自由基固化油墨、涂料和粘膠。
Request Sample GENOMER* 6050/TM Rahn AG 以TMPTA為溶劑的改性聚酯樹脂。用於自由基固化油墨、涂料和粘膠。
Request Sample Impranil® DL 1380 Covestro (formerly Bayer MaterialScience) 科思创 陰離子脂肪族聚酯-聚氨酯乳液。適合用於配制織物塗料用於各種應用。特殊性能包括高柔韌性、良好的耐光性、高固體份、柔軟觸感,並適用於機械發泡
Request Sample Impranil® DL 1537 Covestro (formerly Bayer MaterialScience) 科思创 陰離子脂肪族聚酯-聚氨酯乳液。適合用於配制織物塗料用於各種應用。特殊性能包括非常好的耐水解性、良好的附著力、高固體份、良好的攪拌穩定性、柔軟觸感,並適用於機械發泡
Request Sample Impranil® DLN-SD Covestro (formerly Bayer MaterialScience) 科思创 陰離子脂肪族聚酯-聚氨酯乳液,適合用於配制織物塗料用於各種應用。特殊的性能包括高柔韌性、良好的耐光性,並適合用於機械發泡
KEPERADH®-969 Kito Chem KEPERADH®-969 is an adhesive, made of a hydroxyl-containing polyester. It is a colorless to yellowish transparent liquid that can be used to improve the adhesion of metallic baking paints. Also it can be used to improve the flexibility and impact resistan...展開 KEPERADH®-969 is an adhesive, made of a hydroxyl-containing polyester. It is a colorless to yellowish transparent liquid that can be used to improve the adhesion of metallic baking paints. Also it can be used to improve the flexibility and impact resistance, as well as the fullness and high-temperature resistance of most films. Improving the over all water and salt resistance of paints applied to non-ferrous substrates. 收起
KEPERADH®-980 Kito Chem KEPERADH®-980 is a water-based adhesion agent made of an emulsion of modified chlorinated PP. It is a light brown liquid with low chlorine content and excellent adhesion to PP and EPDM substrates. This additive is well suited for use in the production of ...展開 KEPERADH®-980 is a water-based adhesion agent made of an emulsion of modified chlorinated PP. It is a light brown liquid with low chlorine content and excellent adhesion to PP and EPDM substrates. This additive is well suited for use in the production of water-based PP substrates and water-based coatings. 收起
KEPERADH®-982 Kito Chem KEPERADH®-982 is a water-based adhesion agent made of an emulsion of modified chlorinated PP. It is a light brown liquid with low chlorine content and excellent adhesion to PP and EPDM substrates. This additive is well suited for use in the production of ...展開 KEPERADH®-982 is a water-based adhesion agent made of an emulsion of modified chlorinated PP. It is a light brown liquid with low chlorine content and excellent adhesion to PP and EPDM substrates. This additive is well suited for use in the production of water-based PP substrates and water-based coatings. 收起
KEPERADH®-992 Kito Chem KEPERADH®-992 is an adhesive made of an epoxy group with a saline coupling agent. It is a colorless to yellowish transparent liquid that is highly hydrolysis with a strong adhesive force and fast bond. This additive is well suited for use in the productio...展開 KEPERADH®-992 is an adhesive made of an epoxy group with a saline coupling agent. It is a colorless to yellowish transparent liquid that is highly hydrolysis with a strong adhesive force and fast bond. This additive is well suited for use in the production of water-based coatings and water-based inks. It can be used in the substrate of most inorganic materials such as glass, ceramics, polymeric materials, paper, etc. 收起
KEPERADH®-993 Kito Chem KEPERADH®-993 is an adhesive made of an epoxy group with a saline coupling agent. It is a colorless to yellowish transparent liquid that is highly hydrolysis with a strong adhesive force and fast bond. This additive is well suited for use in the productio...展開 KEPERADH®-993 is an adhesive made of an epoxy group with a saline coupling agent. It is a colorless to yellowish transparent liquid that is highly hydrolysis with a strong adhesive force and fast bond. This additive is well suited for use in the production of water-based coatings and water-based inks. It can be used in the substrate of most inorganic materials such as glass, ceramics, polymeric materials, paper, etc.. 收起
KEPERADH®-994 Kito Chem KEPERADH®-994 is a high strength adhesive made of a 3-glycidyl allyltrimethylsilane solution. It is a colorless transparent liquid that is highly hydrolysis with a strong adhesive force and fast bond. This additive is well suited for use in the production...展開 KEPERADH®-994 is a high strength adhesive made of a 3-glycidyl allyltrimethylsilane solution. It is a colorless transparent liquid that is highly hydrolysis with a strong adhesive force and fast bond. This additive is well suited for use in the production of water-based print, printing ink of the ceramic and glass, ceramic and glass surface and hydrolyzed primers. It can be used in the substrate of the inorganic materials such as glass, ceramics, polymeric materials, paper, etc. 收起
KEPERADH®-997 Kito Chem KEPERADH®-997 is a high strength adhesive made of a multi-amine group with a saline coupling agent. It is a colorless to yellowish transparent liquid that is highly hydrolysis with a strong adhesive force and fast bond. This additive is well suited for us...展開 KEPERADH®-997 is a high strength adhesive made of a multi-amine group with a saline coupling agent. It is a colorless to yellowish transparent liquid that is highly hydrolysis with a strong adhesive force and fast bond. This additive is well suited for use in the production of epoxy's, PU and thermoplastic acrylics. It can be used in the substrate of the steel, aluminum alloy, glass, ceramics, polymeric materials, paper, etc. 收起