| 1,4-Butanediol (1,4-BDO) | DCC (Dairen Chemical Corp.) | 1,4-Butanediol (1,4-BDO) is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide and hydrogen. 1,4-Butanediol is a colorless, high-boiling liquid with a low order of toxicity. 1,4-Butanediol is used as a raw material for manuf...展開 1,4-Butanediol (1,4-BDO) is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide and hydrogen. 1,4-Butanediol is a colorless, high-boiling liquid with a low order of toxicity. 1,4-Butanediol is used as a raw material for manufacturing carrier solvent in printing ink, and is a key component of hot melt adhesive. 收起 | |
| 2-Methyl-1,3-Propanediol | DCC (Dairen Chemical Corp.) | 2-Methyl-1,3-Propanediol is a by-product, which is produced by hydro-formulation and hydro-generation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a colorless, low viscosity and toxic liquid with a unique molecular structure. 2-Methyl-1,3-Propan...展開 2-Methyl-1,3-Propanediol is a by-product, which is produced by hydro-formulation and hydro-generation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a colorless, low viscosity and toxic liquid with a unique molecular structure. 2-Methyl-1,3-Propanediol is used as a raw material in monomers for the preparation of coatings and binders. 收起 | |
| Alkoxylated 2-Methyl-1,3-Propanediol | DCC (Dairen Chemical Corp.) | Alkoxylated 2-Methyl-1,3-Propanediol is produced by Alkoxylation of 2-Methyl-1,3-Propanediol and Alkoxide. It is a colorless liquid with two primary hydroxyls. Alkoxylated 2-Methyl-1,3-Propanediol is used as a raw material in printing inks, adhesives, and...展開 Alkoxylated 2-Methyl-1,3-Propanediol is produced by Alkoxylation of 2-Methyl-1,3-Propanediol and Alkoxide. It is a colorless liquid with two primary hydroxyls. Alkoxylated 2-Methyl-1,3-Propanediol is used as a raw material in printing inks, adhesives, and paints. 收起 | |
| BYK®-012 | BYK 毕克 | BYK®-012是一種礦物油，不含硅的消泡劑，適用於水性無VOC膠粘劑和密封劑 | |
| BYK®-016 | BYK 毕克 | BYK®-016是一種礦物油，不含硅的消泡劑，適用於水性無VOC膠粘劑和密封劑 | |
| BYK®-022 | BYK 毕克 | 含硅消泡劑，適用於水性膠粘劑和密封劑 | |
| BYK®-023 | BYK 毕克 | 含硅消泡劑，適用於水性膠粘劑和密封劑 | |
| BYK®-024 | BYK 毕克 | 含硅消泡劑，適用於基於水性乳膠的膠粘劑和密封劑 | |
| BYK®-025 | BYK 毕克 | 含硅消泡劑，適用於基於水性乳膠的膠粘劑和密封劑 | |
| BYK®-028 | BYK 毕克 | 含硅消泡劑，適用於基於水性乳膠的膠粘劑和密封劑 | |
| BYK®-035 | BYK 毕克 | 用於有光澤和半光乳液漆以及乳液彈性體的礦物油消泡劑，消除生產和涂裝過程中的泡沫。特別適合聚氯乙烯含量為20-40%的乳液體系。高剪力不會對效力產生影響。 | |
| BYK®-037 | BYK 毕克 | 礦物油消泡劑，適合乳膠漆、工業乳膠、乳液灰泥和乳液膠粘劑，用於消除生產和施工過程中產生的泡沫 | |
| BYK®-038 | BYK 毕克 | 礦物油消泡劑，適用於乳膠漆、工業乳膠、乳液灰泥和乳膠膠粘劑，可消除其生產和施工過程中產生的泡沫 | |
| BYK®-077 | BYK 毕克 | 硅樹脂消泡劑，防止油漆在生產過程中和用於非極性到高極性溶劑行體系時產生泡沫和氣泡。提高表面性能，特別是流平性，提高表面滑爽度，改善抗刮擦和耐劃傷性。 | |
| BYK®-085 | BYK 毕克 | 含硅消泡劑和表面助劑，適用於溶劑型膠粘劑和密封劑。BYK®-085是BYK®-077的無溶劑版本，尤其適用於需要無溶劑助劑或需要特殊溶劑的體系 | |
| BYK®-088 | BYK 毕克 | 含硅脫氣劑，推薦用於PUR基膠粘劑。也適用於環氧體系 | |
| BYK®-092 | BYK 毕克 | BYK®-092 is a VOC-free, silicone-containing defoamer for aqueous paint systems, printing inks and adhesives. Wide range of uses for conventional application methods | |
| BYK®-093 | BYK 毕克 | 高耐久性含硅消泡劑，適用於水性膠粘劑和密封劑。該消泡劑兼具高效性和廣泛的相容性 | |
| BYK®-154 | BYK 毕克 | 基於水性乳膠的膠粘劑和密封劑用分散劑。北美市場不售賣BYK®-154，而是BYK®-156，它們的差別僅在於固含量 | |
| BYK®-1610 | BYK 毕克 | BYK®-1610是一種消泡劑，適用於基於乳膠的膠粘劑和密封劑 | |
| BYK®-1615 | BYK 毕克 | BYK®-1615是一種消泡劑，適用於基於水性乳膠的膠粘劑和密封劑 | |
| BYK®-1630 | BYK 毕克 | BYK®-1630 is a VOC and APEO-free mineral oil defoamer for aqueous architectural coatings, general industrial coatings, floor coatings and adhesives. | |
| BYK-1641 | BYK 毕克 | BYK-1641 is a VOC- and mineral oil-free defoamer for aqueous systems that is very easy to incorporate and has an excellent price-performance ratio. | |
| BYK-1642 | BYK 毕克 | BYK-1642 is a polymer-based, VOC- and silicone-free defoamer for aqueous coatings, printing inks, adhesives, paper coatings, and construction chemicals. Optimum performance at the lowest dosage. | |
| BYK-1745 | BYK 毕克 | BYK-1745 is a VOC- and silicone-free defoamer based on polymers and renewable as well as sustainable raw materials for aqueous adhesives and aqueous architectural coatings. | |
| BYK®-1760 | BYK 毕克 | BYK®-1760 is an emission-free silicone and polymer-containing defoamer and air release agent for solvent-borne and solvent-free coatings, adhesives, sealants and casting resins. Particularly recommended for epoxy resin systems. | |
| BYK®-1789 | BYK 毕克 | BYK®-1789 is a solvent-free, silicone-containing defoamer for aqueous, high build and fast-drying coating systems and adhesives. For improving air release and effectively preventing microfoam. | |
| BYK®-3400 | BYK 毕克 | BYK®-3400是一種含硅表面助劑，適用於水性膠粘劑和密封劑。它可以降低表面張力，從而改善基材潤濕性 | |
| BYK®-3410 | BYK 毕克 | BYK®-3410是一種無硅表面助劑，適用於水性膠粘劑和密封劑。它可以降低表面張力，從而改善基材潤濕性 | |
| BYK®-345 | BYK 毕克 | 用於水性體系的硅樹脂表面活性劑。顯著降低表面張力，因而具有出色的基材滑爽性和流平性。是無溶劑型的BYK® 346。無泡沫穩定性，不會提高表面滑爽性或削弱再涂性。 | |
| BYK®-346 | BYK 毕克 | 用於水性體系的硅樹脂表面活性劑。是提高水性體系的基材潤濕性的標准添加劑。用於含3-7%共溶劑的體系中時具有最適宜的效率。顯著降低表面張力。 | |
| BYK®-347 | BYK 毕克 | 用於水性體系的硅樹脂表面活性劑。顯著降低表面張力，因而具有出色的基材滑爽性和流平性。不會提高表面滑爽性或削弱再涂性。 | |
| BYK®-348 | BYK 毕克 | 用於水性體系的硅樹脂表面活性劑。顯著降低表面張力，因而具有良好的基材滑爽性和流平性。無泡沫穩定性，不會提高表面滑爽性或削弱再涂性。適合用於無溶劑型水性配方。 | |
| BYK®-349 | BYK 毕克 | BYK®-349是一種用於水性體系的硅樹脂表面活性劑。BYK®-349特別適合基於丙烯酸、苯丙、丙烯酸 PU組合、可交聯聚氨酯和烘干體系的各種水性配方。 | |
| BYK®-3764 | BYK 毕克 | BYK®-3764 is a solvent-free silicone surface additive for aqueous, solvent-borne and solvent-free coatings and adhesives to increase surface slip and to greatly reduce surface tension. Minor foam stabilization and low dosage. | |
| BYK®-3771 | BYK 毕克 | BYK®-3771 is a silicone surface additive for solvent-free, radiation-curable, and solvent-borne coatings, adhesives, and printing inks with a strong reduction in the surface tension. OH-functional and solvent-free. | |
| BYK®-4509 | BYK 毕克 | BYK-4509 is an adhesion promoter for solvent-borne and aqueous systems applied to metallic substrates. It is compatible with most binders and is therefore ideal for universal use. This product is a salt of a polymer with acidic groups. | |
| BYK®-4512 | BYK 毕克 | BYK®-4512 is an adhesion promoter for solvent-borne systems applied to metal substrates. It is particularly well-suited for use in chromate-free primers and on metal substrates that are pre-treated in a chromate-free manner. | |
| BYK®-9076 | BYK 毕克 | BYK®-9076是一種高分子量助劑，適用於無溶劑膠粘劑和密封劑，BYK®-9076尤其適用於酸性和中性炭黑的穩定 | |
| BYK®-9077 | BYK 毕克 | 用於無溶劑型濃縮顏料的新型高分子添加劑，用來穩定基本型碳黑。低黏度、高顏料承載量﹔在羥基官能聚醚/增塑劑等無溶劑型載體中穩定。 | |
| BYK®-A 530 | BYK 毕克 | 脫氣劑和消泡劑，適合溶劑型和無溶劑環氧體系 | |
| BYK®-A 535 | BYK 毕克 | 無硅消泡劑/脫氣劑，適用於無溶劑和溶劑型環氧和PUR基膠粘劑和密封劑 | |
| BYK®-A 550 | BYK 毕克 | BYK®-A 550具有強脫氣效果，卻不會導致強霧影效果 | |
| BYK®-A 555 | BYK 毕克 | BYK®-A 555應用於各種膠粘劑具有最高效率 | |
| BYK®-DYNWET 800 | BYK 毕克 | BYK®-DYNWET 800是一種無硅表面助劑，適用於水性膠粘劑和密封劑。它可降低快速施工過程中的動態表面張力，從而改善基材潤濕性 | |
| BYK-P 2710 | BYK 毕克 | BYK-P 2710 is a processing additive for solvent-free and solvent-borne epoxy resins for the adjustment of rheological properties of 2-K systems in combination with hydrophilic fumed silica (Thixbreaker). | |
| BYK-P 2720 | BYK 毕克 | BYK-P 2720 is a rheology additive for solvent-free and solvent-borne amine hardeners to enhance the rheological properties of two-component systems in combination with hydrophilic fumed silica (Thixbooster). | |
| BYK®-W 940 | BYK 毕克 | BYK®-W 940可阻止礦物填料例如碳酸鈣和三氫氧化鋁的沉降，並減少無機和有機顏料的浮色和發花 | |
| BYK®-W 961 | BYK 毕克 | BYK®-W 961可作為潤濕和分散劑，阻止礦物填料沉降 | |
| BYK®-W 966 | BYK 毕克 | BYK®-W 966可增加聚酯樹脂體系中各種最常用填料例如碳酸鈣和三氫氧化鋁的分散。它可降低粘度，從而使更高顏填料負載量成為可能，它還可防止沉降 | |
| BYK®-W 969 | BYK 毕克 | BYK®-W 969可作為膠粘劑和密封劑的潤濕和分散劑，並降低其粘度 | |
| BYK®-W 980 | BYK 毕克 | BYK®-W 980可增加各種最常用填料例如碳酸鈣和三氫氧化鋁的分散。它可降低粘度，從而使更高顏填料負載量成為可能，它還可防止沉降 | |
| BYK®-W 985 | BYK 毕克 | BYK®-W 985可增加最常用填料例如碳酸鈣和三氫氧化鋁的潤濕和分散速度。它可極大地降低粘度，從而使更高顏填料負載量成為可能。BYK®-W 985通常不起防沉降作用 | |
| BYKANOL-A | BYK 毕克 | BYKANOL-A is an anti-gelling additive for solvent-borne coatings to prevent increased viscosity in air-drying and baking coatings, gelling in long-term storage, and skin formation in oxidative-drying systems. Suitable for post addition. | |
| BYKJET-9171 | BYK 毕克 | BYKJET-9171 is a solvent-free wetting and dispersing additive for aqueous inkjet inks.It is particularly suitable for stabilizing organic pigments and disperse dyes. It greatly reduces the viscosity of the mill base, which enables a higher pigment content...展開 BYKJET-9171 is a solvent-free wetting and dispersing additive for aqueous inkjet inks.It is particularly suitable for stabilizing organic pigments and disperse dyes. It greatly reduces the viscosity of the mill base, which enables a higher pigment content in pigment concentrates. It is particularly recommended for binder-free grinding. 收起 | |
| CLAYTONE 34 | BYK 毕克 | CLAYTONE 34 is a modified montmorillonite designed for use in aliphatic systems containing aromatic solvent or aromatic-aliphatic solvent blends which display moderate polarity. It demonstrates high gelling efficiency, reproducible viscosity and thixotrop...展開 CLAYTONE 34 is a modified montmorillonite designed for use in aliphatic systems containing aromatic solvent or aromatic-aliphatic solvent blends which display moderate polarity. It demonstrates high gelling efficiency, reproducible viscosity and thixotropic development, a high degree of sag control and prevents hard settling of pigments and fillers. CLAYTONE 34 has proven to be a reliable and reproducible rheological additive for use in oil based paints, stains, alkyd enamels and primers, and epoxy systems. 收起 | |
| CLAYTONE® 40 | BYK 毕克 | Claytone® 40是一種親有機膨潤土衍生物，用作觸變增稠劑和抗沉降劑，用於低到中等極性溶劑型塗料。這是一個傳統的有機粘土，需要添加活化劑以獲取充分的效能。作為親有機的蒙脫石產品，它可以在有機介質中溶脹，並建立一種凝膠結構（紙房狀構造）。單蒙脫石片層之間的弱氫鍵是此觸變凝膠結構的原因。為了獲取最佳效率，片層的完全分離是必要的（附聚物解聚成初級粒子完全分散）。 | |
| CLAYTONE® AF | BYK 毕克 | Claytone® AF是一種改性蒙脫石，用於含低到中等極性的脂肪族溶劑和脂肪族 - 芳香族溶劑混合物的體系。Claytone®產生可重複的黏度和觸變控制，高程度流掛控制，並防止顏料沉降。Claytone® AF是自分散的，不需要極性活化劑。Claytone® AF無需高剪切力或預凝膠。 | |
| CLAYTONE® APA | BYK 毕克 | Claytone® APA是一種改性蒙脫石，用於含中等到高極性的芳香族溶劑或芳香族氧化物溶劑混合物的體系。Claytone® APA具有高凝膠效率、可重複的黏度和觸變控制，高程度流掛控制，並防止顏料和填料沉降。 | |
| CLAYTONE® HT | BYK 毕克 | Claytone® HT是一種改性蒙脫石，用於含低到中等極性的芳香族溶劑和脂肪族溶劑的體系。Claytone® HT具有高凝膠效率、可重複的黏度和觸變控制，高程度流掛控制，並防止顏料和填料沉降。本產品是一種高性能的流變助劑，用於在高性能的油性塗料，特別適合於工業、船舶和防護塗料。 | |
| CLAYTONE® HY | BYK 毕克 | Claytone® HY是一種改性蒙脫石，用於低到中等極性的印刷油墨。Claytone® HY具有高凝膠效率、可增加黏度和屈服值，防止顏料聚集、沉降，減少起霧，並使油墨生產商可控制粘性粘度。 | |
| CLAYTONE-40 | BYK 毕克 | TIXOGEL® VP是一個觸變、防沉降劑，可用於低到中等極性體系。為了達到最佳的效率，TIXOGEL® VP應使用高剪切力分散。 | |
| CLAYTONE-EM | BYK 毕克 | CLAYTONE-EM is a high efficiency rheological additive suitable for use in synthetic base fluids and all-oil systems to increase the carrying capacity and hole cleaning capabilities. The product is also an effective suspension agent for polymer slurries. | |
| CLAYTONE-ER | BYK 毕克 | CLAYTONE-ER is a high efficiency rheological additive suitable for use in mineral oil and synthetic base fluids to increase the carrying capacity and hole cleaning capabilities. The product is also an effective suspension agent for polymer slurries. | |
| CLAYTONE-IMG 400 | BYK 毕克 | CLAYTONE-IMG 400 is a general purpose rheological additive for diesel and mineral oil based drilling fluids to increase the carrying capacity and hole cleaning capabilities. | |
| CLAYTONE-MPZ | BYK 毕克 | TIXOGEL® MPZ是最高性能有機粘土系列產品。它是一種高效觸變增稠劑、抗沉降劑，用於中等到高極性的的系統。高極性體系中沒必要添加活化劑是一種規則，但對於中等極性體系有益。 | |
| CLAYTONE-SF | BYK 毕克 | CLAYTONE-SF is an ultra high efficiency rheological suitable for use in mineral oil and synthetic base fluids to increase the carrying capacity and hole cleaning capabilities. The product is also an effective suspension agent for polymer slurries. | |
| DA-100 | DCC (Dairen Chemical Corp.) | DA-100 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100 forms a flexible film with adhesive properties for broad applications. DA-100 is used as a base emu...展開 DA-100 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100 forms a flexible film with adhesive properties for broad applications. DA-100 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-100 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-100L | DCC (Dairen Chemical Corp.) | DA-100L is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100L forms a flexible film with adhesive properties for broad applications. DA-100L is used as a base e...展開 DA-100L is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100L forms a flexible film with adhesive properties for broad applications. DA-100L is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-100L is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-101 | DCC (Dairen Chemical Corp.) | DA-101 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-101 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展開 DA-101 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-101 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-101 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-101 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-102 | DCC (Dairen Chemical Corp.) | DA-102 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展開 DA-102 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 2500-3700 mPa.s. DA-102 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-102 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-102H | DCC (Dairen Chemical Corp.) | DA-102H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C...展開 DA-102H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 3500-4500 mPa.s. DA-102H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-102H is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-103 | DCC (Dairen Chemical Corp.) | DA-103 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展開 DA-103 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-103 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-103 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-103H | DCC (Dairen Chemical Corp.) | DA-103H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C...展開 DA-103H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 3200-4200 mPa.s. DA-103H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-103H is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-104 | DCC (Dairen Chemical Corp.) | DA-104 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-104 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展開 DA-104 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-104 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 2000-3000 mPa.s. DA-104 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-104 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-107 | DCC (Dairen Chemical Corp.) | DA-107 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-107 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展開 DA-107 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-107 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1000-2500 mPa.s. DA-107 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-107 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-1100 | DCC (Dairen Chemical Corp.) | DA-1100 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1100 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1100 ca...展開 DA-1100 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1100 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1100 can be used in tile adhesives. 收起 | |
| DA-111 | DCC (Dairen Chemical Corp.) | DA-111 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-111 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展開 DA-111 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-111 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. It is designed as a medium Tg product at around approximately 14 °C. DA-111 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-111 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-1120 | DCC (Dairen Chemical Corp.) | DA-1120 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1120 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1120 ca...展開 DA-1120 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1120 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1120 can be used in tile adhesives. 收起 | |
| DA-1122 | DCC (Dairen Chemical Corp.) | DA-1122 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1122 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1122 ca...展開 DA-1122 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1122 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1122 can be used in tile adhesives. 收起 | |
| DA-1126 | DCC (Dairen Chemical Corp.) | DA-1126 is a water re-dispersible powder based on a vinyl acetate/ethylene copolymer based containing polyvinyl alcohol as a protective colloid. DA-1126 improves adhesion, flexibility, plasticity, abrasion resistance and workability of modified compounds....展開 DA-1126 is a water re-dispersible powder based on a vinyl acetate/ethylene copolymer based containing polyvinyl alcohol as a protective colloid. DA-1126 improves adhesion, flexibility, plasticity, abrasion resistance and workability of modified compounds. It is used in ceramic tile adhesives, and EIFS. 收起 | |
| DA-1130 | DCC (Dairen Chemical Corp.) | DA-1130 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1130 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展開 DA-1130 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1130 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. It can be used in tile adhesives. 收起 | |
| DA-1133 | DCC (Dairen Chemical Corp.) | DA-1133 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1133 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展開 DA-1133 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1133 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1133 is used in construction adhesives. 收起 | |
| DA-117 | DCC (Dairen Chemical Corp.) | DA-117 is a non-plasticized, aqueous, milky, white dispersion of a vinyl acetate-ethylene copolymer with high solid contents developed to provide a versatile base for construction applications. After evaporation of its water content, DA-117 forms a flexib...展開 DA-117 is a non-plasticized, aqueous, milky, white dispersion of a vinyl acetate-ethylene copolymer with high solid contents developed to provide a versatile base for construction applications. After evaporation of its water content, DA-117 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 500-1500 mPa.s. DA-117 is used in joint compounds and decorative coatings, and carpet back coatings. 收起 | |
| DA-1200 | DCC (Dairen Chemical Corp.) | DA-1200 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1200 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展開 DA-1200 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1200 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1200 is used in tile adhesives. 收起 | |
| DA-1210 | DCC (Dairen Chemical Corp.) | DA-1210 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1210 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展開 DA-1210 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1210 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1210 is used in construction adhesives, sealing slurries, and repair mortars. 收起 | |
| DA-125 | DCC (Dairen Chemical Corp.) | DA-125 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -8 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-125 is used as general adhesive f...展開 DA-125 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -8 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-125 is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-125 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-125 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-128 | DCC (Dairen Chemical Corp.) | DA-128 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13°C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128 is used as general adhesive f...展開 DA-128 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13°C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128 is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-128 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-128 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-128H | DCC (Dairen Chemical Corp.) | DA-128H is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128H is used as general adhesiv...展開 DA-128H is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128H is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-128H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-128H is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-1400 | DCC (Dairen Chemical Corp.) | DA-1400 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1400 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展開 DA-1400 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1400 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1400 is used in tile adhesives, and sealing slurries. 收起 | |
| DA-1410 | DCC (Dairen Chemical Corp.) | DA-1410 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1410 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展開 DA-1410 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1410 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1410 is used in construction adhesives. 收起 | |
| DA-1420 | DCC (Dairen Chemical Corp.) | DA-1420 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1420 improves adhesion, flexural strength, plasticity, abrasion resistance, and workability of modified compound...展開 DA-1420 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1420 improves adhesion, flexural strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1420 is used in tile adhesives. 收起 | |
| DA-1430 | DCC (Dairen Chemical Corp.) | DA-1430 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1430 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. D...展開 DA-1430 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1430 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1430 is used in tile adhesives, and trowelling compounds. 收起 | |
| DA-1450 | DCC (Dairen Chemical Corp.) | DA-1450 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1450 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. D...展開 DA-1450 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1450 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1450 is used in tile adhesives, and construction adhesives. 收起 | |
| DA-179 | DCC (Dairen Chemical Corp.) | DA-179 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. The soft, flexible polymer makes use of a surfactant protection system to provide excellent water resistance and soft, flexible films. DA-179 is u...展開 DA-179 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. The soft, flexible polymer makes use of a surfactant protection system to provide excellent water resistance and soft, flexible films. DA-179 is used in high performance waterproof coatings. 收起 | |
| DA-180L | DCC (Dairen Chemical Corp.) | DA-180L is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. After the evaporation of its water content, DA-180L dries to a clear, soft and flexible film to provide a better waterproofing property. DA-180L ...展開 DA-180L is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. After the evaporation of its water content, DA-180L dries to a clear, soft and flexible film to provide a better waterproofing property. DA-180L is used in general adhesives. 收起 | |
| DA-183 | DCC (Dairen Chemical Corp.) | DA-183 is a vinyl acetate-ethylene copolymer emulsion for cement or plaster based mortars. The addition causes of DA-183 increases the adhesion of mortars to other mineral surfaces. These modified coatings show much better elasticity. DA-183 is used in mo...展開 DA-183 is a vinyl acetate-ethylene copolymer emulsion for cement or plaster based mortars. The addition causes of DA-183 increases the adhesion of mortars to other mineral surfaces. These modified coatings show much better elasticity. DA-183 is used in mortars or grouts. 收起 | |
| DA-265 | DCC (Dairen Chemical Corp.) | DA-265 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. After drying, a water-resistant, clear and flexible film is formed, exhibiting stability against degradation, discoloration...展開 DA-265 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. After drying, a water-resistant, clear and flexible film is formed, exhibiting stability against degradation, discoloration by UV-light, oxygen and the ozone. DA-265 is used in mineral coatings, and floor, wall, or ceiling adhesives. . 收起 | |
| DA-265H | DCC (Dairen Chemical Corp.) | DA-265H is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. A water-resistant, clear and flexible film is formed after drying. This film exhibits stability against degradation, disco...展開 DA-265H is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. A water-resistant, clear and flexible film is formed after drying. This film exhibits stability against degradation, discoloration, oxygen, and the ozone. Because of DA-265H's adjusted ethylene content, this film is extremely tacky and uses no plasticizers to get softness or flexibility. DA-265H is used in mineral coatings, and floor, wall, or ceiling adhesives. 收起 | |
| DA-310 | DCC (Dairen Chemical Corp.) | DA-310 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene copolymer emulsion containing incorporated carboxylic groups. It exhibits VAE emulsion properties together with increased adhesion to metals, like aluminum. DA-310 is used for seali...展開 DA-310 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene copolymer emulsion containing incorporated carboxylic groups. It exhibits VAE emulsion properties together with increased adhesion to metals, like aluminum. DA-310 is used for sealing plastics or metals to other substrates, and as a raw material for adhesives. 收起 |
