UL Prospector

成功!

成功保存搜索結果
BYK-P 2710 Byk 毕克 BYK-P 2710 is a processing additive for solvent-free and solvent-borne epoxy resins for the adjustment of rheological properties of 2-K systems in combination with hydrophilic fumed silica (Thixbreaker).
BYK-P 2720 Byk 毕克 BYK-P 2720 is a rheology additive for solvent-free and solvent-borne amine hardeners to enhance the rheological properties of two-component systems in combination with hydrophilic fumed silica (Thixbooster).
BYKANOL-A Byk 毕克 BYKANOL-A is an anti-gelling additive for solvent-borne coatings to prevent increased viscosity in air-drying and baking coatings, gelling in long-term storage, and skin formation in oxidative-drying systems. Suitable for post addition.
BYKJET-9171 Byk 毕克 BYKJET-9171 is a solvent-free wetting and dispersing additive for aqueous inkjet inks.It is particularly suitable for stabilizing organic pigments and disperse dyes. It greatly reduces the viscosity of the mill base, which enables a higher pigment content...展開 BYKJET-9171 is a solvent-free wetting and dispersing additive for aqueous inkjet inks.It is particularly suitable for stabilizing organic pigments and disperse dyes. It greatly reduces the viscosity of the mill base, which enables a higher pigment content in pigment concentrates. It is particularly recommended for binder-free grinding. 收起
BYK®-012 Byk 毕克 BYK®-012是一種礦物油,不含硅的消泡劑,適用於水性無VOC膠粘劑和密封劑
BYK®-016 Byk 毕克 BYK®-016是一種礦物油,不含硅的消泡劑,適用於水性無VOC膠粘劑和密封劑
BYK®-022 Byk 毕克 含硅消泡劑,適用於水性膠粘劑和密封劑
BYK®-023 Byk 毕克 含硅消泡劑,適用於水性膠粘劑和密封劑
BYK®-024 Byk 毕克 含硅消泡劑,適用於基於水性乳膠的膠粘劑和密封劑
BYK®-025 Byk 毕克 含硅消泡劑,適用於基於水性乳膠的膠粘劑和密封劑
BYK®-028 Byk 毕克 含硅消泡劑,適用於基於水性乳膠的膠粘劑和密封劑
BYK®-035 Byk 毕克 用於有光澤和半光乳液漆以及乳液彈性體的礦物油消泡劑,消除生產和涂裝過程中的泡沫。特別適合聚氯乙烯含量為20-40%的乳液體系。高剪力不會對效力產生影響。
BYK®-037 Byk 毕克 礦物油消泡劑,適合乳膠漆、工業乳膠、乳液灰泥和乳液膠粘劑,用於消除生產和施工過程中產生的泡沫
BYK®-038 Byk 毕克 礦物油消泡劑,適用於乳膠漆、工業乳膠、乳液灰泥和乳膠膠粘劑,可消除其生產和施工過程中產生的泡沫
BYK®-065 Byk 毕克 含硅消泡劑,適用於溶劑型和無溶劑膠粘劑和密封劑。該助劑推薦用於PUR體系,也可用於環氧體系
BYK®-066 N Byk 毕克 含硅消泡劑,適用於溶劑型和無溶劑膠粘劑和密封劑。該助劑推薦用於PUR體系,也可用於環氧體系
BYK®-067 A Byk 毕克 含硅消泡劑,適用於溶劑型和無溶劑膠粘劑和密封劑。該助劑推薦用於PUR體系,也可用於環氧體系
BYK®-077 Byk 毕克 硅樹脂消泡劑,防止油漆在生產過程中和用於非極性到高極性溶劑行體系時產生泡沫和氣泡。提高表面性能,特別是流平性,提高表面滑爽度,改善抗刮擦和耐劃傷性。
BYK®-085 Byk 毕克 含硅消泡劑和表面助劑,適用於溶劑型膠粘劑和密封劑。BYK®-085是BYK®-077的無溶劑版本,尤其適用於需要無溶劑助劑或需要特殊溶劑的體系
BYK®-088 Byk 毕克 含硅脫氣劑,推薦用於PUR基膠粘劑。也適用於環氧體系
BYK®-093 Byk 毕克 高耐久性含硅消泡劑,適用於水性膠粘劑和密封劑。該消泡劑兼具高效性和廣泛的相容性
BYK®-154 Byk 毕克 基於水性乳膠的膠粘劑和密封劑用分散劑。北美市場不售賣BYK®-154,而是BYK®-156,它們的差別僅在於固含量
BYK®-1610 Byk 毕克 BYK®-1610是一種消泡劑,適用於基於乳膠的膠粘劑和密封劑
BYK®-1615 Byk 毕克 BYK®-1615是一種消泡劑,適用於基於水性乳膠的膠粘劑和密封劑
BYK®-3400 Byk 毕克 BYK®-3400是一種含硅表面助劑,適用於水性膠粘劑和密封劑。它可以降低表面張力,從而改善基材潤濕性
BYK®-3410 Byk 毕克 BYK®-3410是一種無硅表面助劑,適用於水性膠粘劑和密封劑。它可以降低表面張力,從而改善基材潤濕性
BYK®-345 Byk 毕克 用於水性體系的硅樹脂表面活性劑。顯著降低表面張力,因而具有出色的基材滑爽性和流平性。是無溶劑型的BYK® 346。無泡沫穩定性,不會提高表面滑爽性或削弱再涂性。
BYK®-346 Byk 毕克 用於水性體系的硅樹脂表面活性劑。是提高水性體系的基材潤濕性的標准添加劑。用於含3-7%共溶劑的體系中時具有最適宜的效率。顯著降低表面張力。
BYK®-347 Byk 毕克 用於水性體系的硅樹脂表面活性劑。顯著降低表面張力,因而具有出色的基材滑爽性和流平性。不會提高表面滑爽性或削弱再涂性。
BYK®-348 Byk 毕克 用於水性體系的硅樹脂表面活性劑。顯著降低表面張力,因而具有良好的基材滑爽性和流平性。無泡沫穩定性,不會提高表面滑爽性或削弱再涂性。適合用於無溶劑型水性配方。
BYK®-349 Byk 毕克 BYK®-349是一種用於水性體系的硅樹脂表面活性劑。BYK®-349特別適合基於丙烯酸、苯丙、丙烯酸 PU組合、可交聯聚氨酯和烘干體系的各種水性配方。
BYK®-410 Byk 毕克 液體流變助劑,適用於溶劑型和無溶劑涂料。添加后,它可增加體系的假塑性。其觸變性流動行為阻止了沉降和流挂。由於它是液態,易操作,甚至可以后添加。該助劑添加時無需特殊溫度控制
BYK®-411 Byk 毕克 用於溶劑型和無溶劑型涂料的液態流變添加劑。使用后可在體系內形成一種假塑性,其觸變型流動特性可以防止沉澱和流挂。由於產品呈液態,因而使用簡便。
BYK®-420 Byk 毕克 用於水性涂料和顏料濃縮漿的液體流變助劑,加入后能形成三維網絡,這樣形成的觸變流動性防止沉降和改善流挂性,應加入到研磨基料中。
BYK®-425 Byk 毕克 用於水性涂料和濃縮顏料的液態流變添加劑。適用於水性和水稀釋性體系。該添加劑可產生一種假塑性的流動特性,可以提高抗流挂性和抗沉澱性。不含VOC及APEO。與多種水性樹脂體系有廣泛的相容性。
BYK®-430 Byk 毕克 用於溶劑型體系(重型、防護型、抗腐蝕和一般工業涂料)的液態觸變控制添加劑。
BYK®-431 Byk 毕克 用於溶劑型體系的液態觸變控制添加劑。
BYK®-4509 Byk 毕克 BYK-4509 is an adhesion promoter for solvent-borne and aqueous systems applied to metallic substrates. It is compatible with most binders and is therefore ideal for universal use. This product is a salt of a polymer with acidic groups.
BYK®-4512 Byk 毕克 BYK®-4512 is an adhesion promoter for solvent-borne systems applied to metal substrates. It is particularly well-suited for use in chromate-free primers and on metal substrates that are pre-treated in a chromate-free manner.
BYK®-9076 Byk 毕克 BYK®-9076是一種高分子量助劑,適用於無溶劑膠粘劑和密封劑,BYK®-9076尤其適用於酸性和中性炭黑的穩定
BYK®-9077 Byk 毕克 用於無溶劑型濃縮顏料的新型高分子添加劑,用來穩定基本型碳黑。低黏度、高顏料承載量﹔在羥基官能聚醚/增塑劑等無溶劑型載體中穩定。
BYK®-A 515 Byk 毕克 BYK®-A 515是一種高表面活性脫氣劑,通常應用於丙烯酸體系阻止氣泡產生
BYK®-A 530 Byk 毕克 脫氣劑和消泡劑,適合溶劑型和無溶劑環氧體系
BYK®-A 535 Byk 毕克 無硅消泡劑/脫氣劑,適用於無溶劑和溶劑型環氧和PUR基膠粘劑和密封劑
BYK®-A 550 Byk 毕克 BYK®-A 550具有強脫氣效果,卻不會導致強霧影效果
BYK®-A 555 Byk 毕克 BYK®-A 555應用於各種膠粘劑具有最高效率
BYK®-DYNWET 800 Byk 毕克 BYK®-DYNWET 800是一種無硅表面助劑,適用於水性膠粘劑和密封劑。它可降低快速施工過程中的動態表面張力,從而改善基材潤濕性
BYK®-W 940 Byk 毕克 BYK®-W 940可阻止礦物填料例如碳酸鈣和三氫氧化鋁的沉降,並減少無機和有機顏料的浮色和發花
BYK®-W 961 Byk 毕克 BYK®-W 961可作為潤濕和分散劑,阻止礦物填料沉降
BYK®-W 966 Byk 毕克 BYK®-W 966可增加聚酯樹脂體系中各種最常用填料例如碳酸鈣和三氫氧化鋁的分散。它可降低粘度,從而使更高顏填料負載量成為可能,它還可防止沉降
BYK®-W 969 Byk 毕克 BYK®-W 969可作為膠粘劑和密封劑的潤濕和分散劑,並降低其粘度
BYK®-W 980 Byk 毕克 BYK®-W 980可增加各種最常用填料例如碳酸鈣和三氫氧化鋁的分散。它可降低粘度,從而使更高顏填料負載量成為可能,它還可防止沉降
BYK®-W 985 Byk 毕克 BYK®-W 985可增加最常用填料例如碳酸鈣和三氫氧化鋁的潤濕和分散速度。它可極大地降低粘度,從而使更高顏填料負載量成為可能。BYK®-W 985通常不起防沉降作用
CARBOBYK®-9810 Byk 毕克 CARBOBYK-9810 is a highly filled, water-borne carbon nanotube dispersion for enhancing mechanical properties, electrical conductivity, and antistatic behaviour. It is a dispersion of multi-walled carbon nanotubes in water. Incorporating carbon nanotubes i...展開 CARBOBYK-9810 is a highly filled, water-borne carbon nanotube dispersion for enhancing mechanical properties, electrical conductivity, and antistatic behaviour. It is a dispersion of multi-walled carbon nanotubes in water. Incorporating carbon nanotubes into coatings, printing inks, plastics, or adhesives enhances electrical and thermal conductivity, antistatic behaviour, mechanical properties, and shielding from electromagnetic waves. The additive is only recommended for water-borne systems. 收起
Ceraflour® 925 Byk 毕克 Ceraflour® 925 is a finely micronized wax additive for aqueous and solvent-borne systems for increasing slip with simultaneous improvement of scratch resistance. In can coatings and coil coatings, Ceraflour® 925 offers a good balance of scratch resistance...展開 Ceraflour® 925 is a finely micronized wax additive for aqueous and solvent-borne systems for increasing slip with simultaneous improvement of scratch resistance. In can coatings and coil coatings, Ceraflour® 925 offers a good balance of scratch resistance and surface slip. Within this, the additive has no negative influences on other coating properties such as substrate wetting, intercoat adhesion or compound adhesion. 收起
Claytone® 40 Byk 毕克 Claytone® 40是一種親有機膨潤土衍生物,用作觸變增稠劑和抗沉降劑,用於低到中等極性溶劑型塗料。這是一個傳統的有機粘土,需要添加活化劑以獲取充分的效能。作為親有機的蒙脫石產品,它可以在有機介質中溶脹,並建立一種凝膠結構(紙房狀構造)。單蒙脫石片層之間的弱氫鍵是此觸變凝膠結構的原因。為了獲取最佳效率,片層的完全分離是必要的(附聚物解聚成初級粒子完全分散)。
Claytone® AF Byk 毕克 Claytone® AF是一種改性蒙脫石,用於含低到中等極性的脂肪族溶劑和脂肪族 - 芳香族溶劑混合物的體系。Claytone®產生可重複的黏度和觸變控制,高程度流掛控制,並防止顏料沉降。Claytone® AF是自分散的,不需要極性活化劑。Claytone® AF無需高剪切力或預凝膠。
Claytone® APA Byk 毕克 Claytone® APA是一種改性蒙脫石,用於含中等到高極性的芳香族溶劑或芳香族氧化物溶劑混合物的體系。Claytone® APA具有高凝膠效率、可重複的黏度和觸變控制,高程度流掛控制,並防止顏料和填料沉降。
Claytone® HT Byk 毕克 Claytone® HT是一種改性蒙脫石,用於含低到中等極性的芳香族溶劑和脂肪族溶劑的體系。Claytone® HT具有高凝膠效率、可重複的黏度和觸變控制,高程度流掛控制,並防止顏料和填料沉降。本產品是一種高性能的流變助劑,用於在高性能的油性塗料,特別適合於工業、船舶和防護塗料。
Claytone® HY Byk 毕克 Claytone® HY是一種改性蒙脫石,用於低到中等極性的印刷油墨。Claytone® HY具有高凝膠效率、可增加黏度和屈服值,防止顏料聚集、沉降,減少起霧,並使油墨生產商可控制粘性粘度。
DISPERBYK®-118 Byk 毕克 DISPERBYK®-118 is a wetting and dispersing additive for solvent-borne systems to stabilize acidic, neutral and basic titanium dioxides, colored inorganic pigments, transparent iron oxides, fillers, and effect pigments. The additive improves the wetting an...展開 DISPERBYK®-118 is a wetting and dispersing additive for solvent-borne systems to stabilize acidic, neutral and basic titanium dioxides, colored inorganic pigments, transparent iron oxides, fillers, and effect pigments. The additive improves the wetting and dispersing of all inorganic fillers such as calcium carbonate and aluminum hydroxide (ATH). DISPERBYK®-118 is all-purpose for titanium dioxides. The additive causes lower viscosity and enables higher filler loading. 收起
DISPERBYK®-180 Byk 毕克 水性、溶劑型和無溶劑膠粘劑和密封劑用潤濕和分散劑
DISPERBYK®-190 Byk 毕克 水性膠粘劑和密封劑用潤濕和分散劑
DISPERBYK®-191 Byk 毕克 水性膠粘劑和密封劑用潤濕和分散劑
DISPERBYK®-192 Byk 毕克 水性膠粘劑和密封劑用潤濕和分散劑
DISPERBYK®-2152 Byk 毕克 DISPERBYK®-2152 is an emission-free, hyperbranched wetting and dispersing additive for solvent-free epoxy systems and other reactive systems. Achieving excellent deflocculation and stabilization requires an additive with highly efficient pigment-affinic g...展開 DISPERBYK®-2152 is an emission-free, hyperbranched wetting and dispersing additive for solvent-free epoxy systems and other reactive systems. Achieving excellent deflocculation and stabilization requires an additive with highly efficient pigment-affinic groups. In general, those pigment-affinic groups are aminic in nature and can react with the epoxy resins. Due to the special hyperbranched structure of DISPERBYK®-2152 the aminic pigment-affinic groups are encapsulated by polyester side chains; this prevents reaction with the epoxy resin, and, as a result, long-term storage stability is achieved. The additive contains no solvents or volatile components and fulfills the strict requirements of the German AgBB as well as French VOC standards 收起
ERISYS™ GE-10 Emerald Performance Materials ERISYS™ GE-10 is an epoxidized ortho cresol, low viscosity, aromatic, mono-epoxide. It is intended for use as a reactive diluent for high viscosity epoxy resins in adhesives. It is compatible at all concentrations with those resins and resin/diluent blend...展開 ERISYS™ GE-10 is an epoxidized ortho cresol, low viscosity, aromatic, mono-epoxide. It is intended for use as a reactive diluent for high viscosity epoxy resins in adhesives. It is compatible at all concentrations with those resins and resin/diluent blends can be cured using any epoxy resins curing agents. It can be used in concrete, masonry and industrial coatings applications where chemical resistance is desired. 收起
GARAMITE® 1210 Byk 毕克 GARAMITE® 1210是一種獨特的流變助劑,開發用於乙烯基酯和不飽和聚酯體系。它推薦用於不飽和聚酯樹脂中,例如鄰苯二甲酸、間苯二甲酸、DCPD和PET樹脂。相比氣相矽土,該產品可提供改善的防流掛性能、流變控制和穩定性,更有效、生產中易操作(灰塵少、高體積密度,對剪切不敏感)
GARAMITE® 7303 Byk 毕克 GARAMITE®7303i采用了專利的混合礦物觸變膠(MMT)的技術開發。MMT技術提供的性能優勢是傳統的有機粘土添加劑不可能提供的。傳統的有機粘土是非常難以分散,通常要求非常高的剪切混合,以及一個極性活化劑以幫助剝離粘土片層的聚集。由於本產品的多粒子形貌,粉末很容易分散到油或溶劑中,只需中等剪切力。 相比於其他的增稠添加劑GARAMITE®7303i表現出非常獨特的流變曲線。可以通過將本品放入配方中獲得非常高的低剪切粘度,從而導致傑出的防沉降和抗脫水收縮性。然而,當施加剪切力時,粘度迅速降低,...展開 GARAMITE®7303i采用了專利的混合礦物觸變膠(MMT)的技術開發。MMT技術提供的性能優勢是傳統的有機粘土添加劑不可能提供的。傳統的有機粘土是非常難以分散,通常要求非常高的剪切混合,以及一個極性活化劑以幫助剝離粘土片層的聚集。由於本產品的多粒子形貌,粉末很容易分散到油或溶劑中,只需中等剪切力。 相比於其他的增稠添加劑GARAMITE®7303i表現出非常獨特的流變曲線。可以通過將本品放入配方中獲得非常高的低剪切粘度,從而導致傑出的防沉降和抗脫水收縮性。然而,當施加剪切力時,粘度迅速降低,該特性使其具有良好的施工性能。 收起
GARAMITE® 7305 Byk 毕克 GARAMITE® 7305采用了專利的混合礦物觸變膠(MMT)的技術開發。MMT技術提供的性能優勢是傳統的有機粘土添加劑不可能提供的。傳統的有機粘土是非常難以分散,通常要求非常高的剪切混合,以及一個極性活化劑以幫助剝離粘土片層的聚集。由於本產品的多粒子形貌,粉末很容易分散到油或溶劑中,只需中等剪切力。 相比於其他的增稠添加劑GARAMITE®7305表現出非常獨特的流變曲線。可以通過將本品放入配方中獲得非常高的低剪切粘度,從而導致傑出的防沉降和抗脫水收縮性。然而,當施加剪切力時,粘度迅速降低,該...展開 GARAMITE® 7305采用了專利的混合礦物觸變膠(MMT)的技術開發。MMT技術提供的性能優勢是傳統的有機粘土添加劑不可能提供的。傳統的有機粘土是非常難以分散,通常要求非常高的剪切混合,以及一個極性活化劑以幫助剝離粘土片層的聚集。由於本產品的多粒子形貌,粉末很容易分散到油或溶劑中,只需中等剪切力。 相比於其他的增稠添加劑GARAMITE®7305表現出非常獨特的流變曲線。可以通過將本品放入配方中獲得非常高的低剪切粘度,從而導致傑出的防沉降和抗脫水收縮性。然而,當施加剪切力時,粘度迅速降低,該特性使其具有良好的施工性能。它最適合用於中等到高極性體系。 收起
Good-Rite® 3112 Emerald Performance Materials Good-Rite® 3112 is a clear to pale straw colored liquid partially hindered primary phenolic antioxidant. It provides long-term thermal stability and color preservation in white, mineral-filled adhesive formulations, sealants and caulks.
Hydrorene AW 1 S.A.P.I.C.I. SpA Hydrorene AW 1 is a water-dispersible isocyanate. This product can be used in 2k waterborne varnishes with good chemical or abrasion resistance. It can also be used in adhesives.
K-FLEX® 500 Emerald Performance Materials K-FLEX® 500 is a blend of dipropylene glycol dibenzoate and diethylene glycol dibenzoate, used as a plasticizer and coalescent agent. It has applications in hot-melt adhesives, water-based latex adhesives, interior and exterior latex paint, coatings and l...展開 K-FLEX® 500 is a blend of dipropylene glycol dibenzoate and diethylene glycol dibenzoate, used as a plasticizer and coalescent agent. It has applications in hot-melt adhesives, water-based latex adhesives, interior and exterior latex paint, coatings and lacquers. 收起
K-FLEX® 500P Emerald Performance Materials K-FLEX® 500P is a blend of diethylene glycol dibenzoate and dipropylene glycol dibenzoate that is slightly rich in the diethylene glycol dibenzoate component. It was specifically designed for the coatings industry where very low VOC content is required or...展開 K-FLEX® 500P is a blend of diethylene glycol dibenzoate and dipropylene glycol dibenzoate that is slightly rich in the diethylene glycol dibenzoate component. It was specifically designed for the coatings industry where very low VOC content is required or other application areas where low VOC content is critical. It can also be used in adhesives, plastisols and other applications requiring a polar plasticizer with a lower VOC content. 收起
K-FLEX® 850P Emerald Performance Materials K-FLEX® 850P is a blend of dipropylene glycol dibenzoate and diethylene glycol dibenzoate specifically designed as a coalescent for dispersions and a high solvating plasticizer for plastisol/vinyl sealants, polysulphide sealants and silane modified polyme...展開 K-FLEX® 850P is a blend of dipropylene glycol dibenzoate and diethylene glycol dibenzoate specifically designed as a coalescent for dispersions and a high solvating plasticizer for plastisol/vinyl sealants, polysulphide sealants and silane modified polymer sealants. It is also suitable for use in latex adhesives, latex caulks and sealants and architectural and graphic arts coatings. 收起
K-FLEX® 850S Emerald Performance Materials K-FLEX® 850S is a blend of diethylene glycol dibenzoate and dipropylene glycol dibenzoate, optimized for use as a plasticizer in waterborne latex applications such as hot-melt adhesives, latex adhesives, interior and exterior latex paint, caulks and seala...展開 K-FLEX® 850S is a blend of diethylene glycol dibenzoate and dipropylene glycol dibenzoate, optimized for use as a plasticizer in waterborne latex applications such as hot-melt adhesives, latex adhesives, interior and exterior latex paint, caulks and sealants and overprint varnishes. It has full FDA approvals for adhesives and was designed to assist the formulator on issues of VOC reduction. 收起
K-FLEX® 975P Emerald Performance Materials K-FLEX® 975P is a patent-pending blend of diethylene glycol dibenzoate, dipropylene glycol dibenzoate and propylene glycol dibenzoate. It is used as a low VOC plasticizer for water-based latex adhesives , caulks and sealants, putties, screen-printing plas...展開 K-FLEX® 975P is a patent-pending blend of diethylene glycol dibenzoate, dipropylene glycol dibenzoate and propylene glycol dibenzoate. It is used as a low VOC plasticizer for water-based latex adhesives , caulks and sealants, putties, screen-printing plastisol inks, architectural latex coatings as a low VOC coalescent/plasticizer, other coatings including graphic arts applications such as waterborne overprint varnish and waterborne flexographic ink. It can also be used as a low VOC coalescent for paint and coating dispersions. 收起
K-FLEX® DP Emerald Performance Materials K-FLEX® DP is a high solvating plasticizer, comprised of dipropylene glycol dibenzoate. It is compatible with a wide range of polar polymers and can be used in applications such as a low VOC plasticizer in putties, latex adhesives, latex caulks and sealan...展開 K-FLEX® DP is a high solvating plasticizer, comprised of dipropylene glycol dibenzoate. It is compatible with a wide range of polar polymers and can be used in applications such as a low VOC plasticizer in putties, latex adhesives, latex caulks and sealants, coatings and screen-printing plastisol inks. 收起
K-FLEX® PG Emerald Performance Materials K-FLEX® PG is a grade of propylene glycol dibenzoate designed primarily for used as a low VOC plasticizer for silane modified polymer sealants and plastisol printing inks. It is also suitable for use in latex adhesives, latex caulks and sealants and latex...展開 K-FLEX® PG is a grade of propylene glycol dibenzoate designed primarily for used as a low VOC plasticizer for silane modified polymer sealants and plastisol printing inks. It is also suitable for use in latex adhesives, latex caulks and sealants and latex coatings. 收起
Kalama® Benzyl Alcohol NF/FCC Emerald Performance Materials Kalama® Benzyl Alcohol NF/FCC is a low volatility and low toxicity general purpose solvent which functions as a coalescent, solvent and co-solvent for cellulose acetate and nitrocellulose. It can be used in a wide range of curing agent formulations for ep...展開 Kalama® Benzyl Alcohol NF/FCC is a low volatility and low toxicity general purpose solvent which functions as a coalescent, solvent and co-solvent for cellulose acetate and nitrocellulose. It can be used in a wide range of curing agent formulations for epoxy resins, as a co-catalyst and plasticizer and to keep the temperature low during the curing process. It is also used as a solvent or co-solvent in coatings, inks, adhesives, lacquers and photo developer systems. 收起
Kalama® Benzyl Alcohol Technical Grade Emerald Performance Materials Kalama® Benzyl Alcohol Technical Grade is used as a general solvent in the formulation of inks and lacquers where low volatility and low toxicity are desired. It functions as a coalescent, solvent and co-solvent for cellulose acetate and nitrocellulose. I...展開 Kalama® Benzyl Alcohol Technical Grade is used as a general solvent in the formulation of inks and lacquers where low volatility and low toxicity are desired. It functions as a coalescent, solvent and co-solvent for cellulose acetate and nitrocellulose. It can be used in a wide range of curing agent formulations for epoxy resins, as a co-catalyst and plasticizer and to keep the temperature low during the curing process. It is also used as a solvent or co-solvent in coatings, inks, adhesives, lacquers and photo developer systems. 收起
Laponite® RD Byk 毕克 Laponite® RD是一種人工合成的層狀矽酸鹽。它不溶於水,但水合物和膨脹後成為清澈無色的膠體分散體。在水中2%或更高濃度時,會產生高觸變性凝膠。本產品用於各種水性配方,為其賦予剪切敏感特性。這些包括家用和工業表面塗料,清潔劑,陶瓷釉料,農用化學品,油田和園藝產品。
Laponite® RDS Byk 毕克 Laponite® RDS是一種人工合成的層狀矽酸鹽,含無機聚磷酸鹽膠溶劑。它在水裏水合和膨脹後成為清澈無色的膠體分散體,具有低粘度,稱為溶膠。在水中10%濃度時,將保持自由流動24小時。添加少量電解質後,會快速形成高觸變性凝膠。本產品用於各種水性配方,為其賦予剪切敏感特性,包括家用和工業表面塗料,清潔劑,農藥和園藝產品。
Laponite® S482 Byk 毕克 Laponite® S482是專利分散劑改性的合成層狀矽酸鹽。它在水裏水合和膨脹後成為半透明無色的膠體分散體,稱為溶膠。在水中25%的固體濃度時,將保持自由流動長達1年。添加少量的電解液後,或在配方中加入,例如樹脂,表面活性劑或顏料,會迅速形成高觸變性凝膠。它用於各種水性配方,為其賦予剪切敏感特性,包括DIY和工業表面塗料,家用清潔劑,陶瓷和農業化學產品。
Laponite® SL25 Byk 毕克 Laponite® SL25是專利分散劑改性的合成層狀矽酸鹽可現用的液體乳液。供應形式為水中25%固體含量,Laponite® SL25是一種半透明的無色低粘度的液體分散體。在配方中加入,例如樹脂,表面活性劑或顏料,會迅速形成高觸變性凝膠。它用於各種水性配方,為其賦予剪切敏感特性,包括DIY和工業表面塗料,家用清潔劑,陶瓷和農業化學產品。
NANOBYK®-3620 Byk 毕克 NANOBYK®-3620 is a VOC-free, aqueous dispersion made up of nanohybrid particles to protect glossy, aqueous, pigmented and unpigmented top-coats against scratching and abrasion. This protective property comes into effect quickly after only a brief drying p...展開 NANOBYK®-3620 is a VOC-free, aqueous dispersion made up of nanohybrid particles to protect glossy, aqueous, pigmented and unpigmented top-coats against scratching and abrasion. This protective property comes into effect quickly after only a brief drying period. NANOBYK® 3620 has no negative influences on the gloss and transparency, and is therefore particularly suitable for clear coats. 收起
Nychem™1562 Emerald Performance Materials Nychem™1562 is a noncarboxylated butadiene acrylonitrile copolymer latex with a medium nitrile content featuring a combination oil, grease and hydrocarbon resistance, toughness/resilience, and tear and abrasion resistance. This product is primarily used ...展開 Nychem™1562 is a noncarboxylated butadiene acrylonitrile copolymer latex with a medium nitrile content featuring a combination oil, grease and hydrocarbon resistance, toughness/resilience, and tear and abrasion resistance. This product is primarily used as a nitrile emulsion for paper saturation and textile coatings. Nychem™1562 may also be used as a wet laminating resin or heat seal adhesive for rubber and textiles. 收起
Nychem™1562X103 Emerald Performance Materials Nychem™1562X103 is a butadiene acrylonitrile copolymer latex with a medium nitrile content which features a combination of oil, grease and hydrocarbon resistance, toughness/resilience, and tear and abrasion resistance. This product's primary application...展開 Nychem™1562X103 is a butadiene acrylonitrile copolymer latex with a medium nitrile content which features a combination of oil, grease and hydrocarbon resistance, toughness/resilience, and tear and abrasion resistance. This product's primary applications are in adhesives, RFL dips, and metal coatings. Nychem™1562X103 can also be applied as a wet laminating resin or heat seal adhesive to rubber and textiles. 收起
Nychem™1570X79 Emerald Performance Materials Nychem™1570x79 is a carboxylated butadiene acrylonitrile copolymer that is used as a medium nitrile synthetic anionic emulsifier. This product can be applied as a wet laminating resin/hot seal adhesive or can be used to increase abrasion, oil and water r...展開 Nychem™1570x79 is a carboxylated butadiene acrylonitrile copolymer that is used as a medium nitrile synthetic anionic emulsifier. This product can be applied as a wet laminating resin/hot seal adhesive or can be used to increase abrasion, oil and water resistance, and/or wear resistance and flexibility in textile coatings. Nychem™1570x79 can also be used in textile coatings to improve tear strength and puncture resistance and is commonly deployed as a nonwoven binder. 收起
Nychem™1572 Emerald Performance Materials Nychem™1572 is a carboxylated butadiene acrylonitrile copolymer that is used as a nitrile synthetic anionic emulsifier. As an adhesive, this product can be used as a wet laminating resin/heat seal adhesive. Nychem™1572 can be used to improved tear resis...展開 Nychem™1572 is a carboxylated butadiene acrylonitrile copolymer that is used as a nitrile synthetic anionic emulsifier. As an adhesive, this product can be used as a wet laminating resin/heat seal adhesive. Nychem™1572 can be used to improved tear resistance and toughness in paper coatings and can be used in textile coatings to increase abrasion, improve tear resistance, flexibility, and puncture resistance. 收起
Nychem™1577 Emerald Performance Materials Nychem™1577 is a non-carboxylated ABS latex that offers a balance of resistance to both polar and nonpolar solvents. Since this product is non-carboxylated, it has a strong resistance to caustic entities. This product is primarily used in RFL dip adhe...展開 Nychem™1577 is a non-carboxylated ABS latex that offers a balance of resistance to both polar and nonpolar solvents. Since this product is non-carboxylated, it has a strong resistance to caustic entities. This product is primarily used in RFL dip adhesive applications because of its durability and resistance to water and alkili. 收起
Nychem™1578X1 Emerald Performance Materials Nychem™1578X1 is a carboxylated acrylonitrile butadiene styrene latex that can be used as a wet laminating resin or heat seal adhesive on rubber, metal and textiles. This product is a also used to enhance textile coating properties for water resistance, ...展開 Nychem™1578X1 is a carboxylated acrylonitrile butadiene styrene latex that can be used as a wet laminating resin or heat seal adhesive on rubber, metal and textiles. This product is a also used to enhance textile coating properties for water resistance, oil or solvent resistance, abrasion and wear resistance and flexibility. It is often used in conjunction with other compatible water-based polymers. 收起
Nychem™1581 Emerald Performance Materials Nychem™1581 is carboxylated butadiene acrylonitrile polymer latex with a high nitrile content featuring a combination oil, grease and hydrocarbon resistance. This product is used as a wet laminating resin or heat seal adhesive as well as an enhancer for...展開 Nychem™1581 is carboxylated butadiene acrylonitrile polymer latex with a high nitrile content featuring a combination oil, grease and hydrocarbon resistance. This product is used as a wet laminating resin or heat seal adhesive as well as an enhancer for textile coating properties which provides water, oil, solvent, abrasion, and wear resistance. Nychem™1581 is compatible with phenolic resins and resistant to caustic entities. 收起
OPTIBENT® 1056 Byk 毕克 OPTIBENT®1056是一種高品質,精心選擇和激活的層狀矽酸鹽產品,並已開發了水泥基瓷磚粘合劑和中塗層(底塗)。由於其優異的觸變性,配方的抗流掛性和可加工性特性可以得到改善。本產品可用於幹混砂漿和膠粘劑
OPTIBENT® 602 Byk 毕克 OPTIBENT® 602是一種高品質,已激活的層狀矽酸鹽產品。由於其額外的有機改性,用於礦物粘合牆體抹灰和液體硬化瓷磚膠粘劑具有特殊的性能。
OPTIBENT® 6027 Byk 毕克 OPTIBENT® 6027是自然未處理的層狀矽酸鹽,適合用於調節幹混砂漿,尤其是水泥基瓷磚膠粘劑,以及滿足C1標准和其它經濟性的幹混砂漿應用的流變性能
OPTIBENT® 6042 Byk 毕克 OPTIBENT® 6042是一款天然層狀矽酸鹽流變改性劑,基於多層矽酸鹽,具有更軟的一致性,可改善流掛和開罐可使用時間,不影響固化時間。OPTIBENT 6042可有效用於礦物基膠黏劑,特別是在水泥中,可快速固化和中等固化膠黏劑。OPTIBENT® 6042適用於水泥建築應用,可平衡其它有機增稠劑例如水助留劑。
OPTIBENT® 987 Byk 毕克 OPTIBENT® 987是經仔細篩選活化的層狀矽酸鹽產品,已被開發用於幹燥預混合砂漿和乳液基體系。它具有出色的觸變效應,並使體系產生了屈服值。
OPTIFLO® H6500 VF Byk 毕克 OPTIFLO® H6500 VF是疏水改性的非離子型聚合物水溶液,通常被稱為締合增稠劑。它不含VOC和不含APEO。使用本產品會增加低剪切流變,如Stormer粘度,並改善流掛控制和一些高剪切或ICI粘度。
OPTIFLO® H7500 VF Byk 毕克 OPTIFLO® H7500 VF 是一種HEUR基非離子型締合增稠劑,其目的是用作水性油漆和塗料的增稠劑。它主要是用來產生KU或中等剪切粘度和流掛控制,用於難增稠體系如VAE、VaVEOVA和乙烯基丙烯酸膠乳體系。它相比傳統HEUR基聚合物可采用較低使用量,由於它可與這些低VOC基料如VAE體系形成強相互作用。該產品比常規系統高效達25%。常見的應用包括水性油漆和塗料、工業塗料、水性膠黏劑、乳液基膠黏劑、屋頂塗料、封泥和密封化合物。