UL Prospector

成功!

成功保存搜索結果
BYK-P 2710 Byk 毕克 BYK-P 2710 is a processing additive for solvent-free and solvent-borne epoxy resins for the adjustment of rheological properties of 2-K systems in combination with hydrophilic fumed silica (Thixbreaker).
BYK-P 2720 Byk 毕克 BYK-P 2720 is a rheology additive for solvent-free and solvent-borne amine hardeners to enhance the rheological properties of two-component systems in combination with hydrophilic fumed silica (Thixbooster).
BYKANOL-A Byk 毕克 BYKANOL-A is an anti-gelling additive for solvent-borne coatings to prevent increased viscosity in air-drying and baking coatings, gelling in long-term storage, and skin formation in oxidative-drying systems. Suitable for post addition.
BYKJET-9171 Byk 毕克 BYKJET-9171 is a solvent-free wetting and dispersing additive for aqueous inkjet inks.It is particularly suitable for stabilizing organic pigments and disperse dyes. It greatly reduces the viscosity of the mill base, which enables a higher pigment content...展開 BYKJET-9171 is a solvent-free wetting and dispersing additive for aqueous inkjet inks.It is particularly suitable for stabilizing organic pigments and disperse dyes. It greatly reduces the viscosity of the mill base, which enables a higher pigment content in pigment concentrates. It is particularly recommended for binder-free grinding. 收起
BYK®-012 Byk 毕克 BYK®-012是一種礦物油,不含硅的消泡劑,適用於水性無VOC膠粘劑和密封劑
BYK®-016 Byk 毕克 BYK®-016是一種礦物油,不含硅的消泡劑,適用於水性無VOC膠粘劑和密封劑
BYK®-022 Byk 毕克 含硅消泡劑,適用於水性膠粘劑和密封劑
BYK®-023 Byk 毕克 含硅消泡劑,適用於水性膠粘劑和密封劑
BYK®-024 Byk 毕克 含硅消泡劑,適用於基於水性乳膠的膠粘劑和密封劑
BYK®-025 Byk 毕克 含硅消泡劑,適用於基於水性乳膠的膠粘劑和密封劑
BYK®-028 Byk 毕克 含硅消泡劑,適用於基於水性乳膠的膠粘劑和密封劑
BYK®-035 Byk 毕克 用於有光澤和半光乳液漆以及乳液彈性體的礦物油消泡劑,消除生產和涂裝過程中的泡沫。特別適合聚氯乙烯含量為20-40%的乳液體系。高剪力不會對效力產生影響。
BYK®-037 Byk 毕克 礦物油消泡劑,適合乳膠漆、工業乳膠、乳液灰泥和乳液膠粘劑,用於消除生產和施工過程中產生的泡沫
BYK®-038 Byk 毕克 礦物油消泡劑,適用於乳膠漆、工業乳膠、乳液灰泥和乳膠膠粘劑,可消除其生產和施工過程中產生的泡沫
BYK®-065 Byk 毕克 含硅消泡劑,適用於溶劑型和無溶劑膠粘劑和密封劑。該助劑推薦用於PUR體系,也可用於環氧體系
BYK®-066 N Byk 毕克 含硅消泡劑,適用於溶劑型和無溶劑膠粘劑和密封劑。該助劑推薦用於PUR體系,也可用於環氧體系
BYK®-067 A Byk 毕克 含硅消泡劑,適用於溶劑型和無溶劑膠粘劑和密封劑。該助劑推薦用於PUR體系,也可用於環氧體系
BYK®-077 Byk 毕克 硅樹脂消泡劑,防止油漆在生產過程中和用於非極性到高極性溶劑行體系時產生泡沫和氣泡。提高表面性能,特別是流平性,提高表面滑爽度,改善抗刮擦和耐劃傷性。
BYK®-085 Byk 毕克 含硅消泡劑和表面助劑,適用於溶劑型膠粘劑和密封劑。BYK®-085是BYK®-077的無溶劑版本,尤其適用於需要無溶劑助劑或需要特殊溶劑的體系
BYK®-088 Byk 毕克 含硅脫氣劑,推薦用於PUR基膠粘劑。也適用於環氧體系
BYK®-093 Byk 毕克 高耐久性含硅消泡劑,適用於水性膠粘劑和密封劑。該消泡劑兼具高效性和廣泛的相容性
BYK®-154 Byk 毕克 基於水性乳膠的膠粘劑和密封劑用分散劑。北美市場不售賣BYK®-154,而是BYK®-156,它們的差別僅在於固含量
BYK®-1610 Byk 毕克 BYK®-1610是一種消泡劑,適用於基於乳膠的膠粘劑和密封劑
BYK®-1615 Byk 毕克 BYK®-1615是一種消泡劑,適用於基於水性乳膠的膠粘劑和密封劑
BYK®-3400 Byk 毕克 BYK®-3400是一種含硅表面助劑,適用於水性膠粘劑和密封劑。它可以降低表面張力,從而改善基材潤濕性
BYK®-3410 Byk 毕克 BYK®-3410是一種無硅表面助劑,適用於水性膠粘劑和密封劑。它可以降低表面張力,從而改善基材潤濕性
BYK®-345 Byk 毕克 用於水性體系的硅樹脂表面活性劑。顯著降低表面張力,因而具有出色的基材滑爽性和流平性。是無溶劑型的BYK® 346。無泡沫穩定性,不會提高表面滑爽性或削弱再涂性。
BYK®-346 Byk 毕克 用於水性體系的硅樹脂表面活性劑。是提高水性體系的基材潤濕性的標准添加劑。用於含3-7%共溶劑的體系中時具有最適宜的效率。顯著降低表面張力。
BYK®-347 Byk 毕克 用於水性體系的硅樹脂表面活性劑。顯著降低表面張力,因而具有出色的基材滑爽性和流平性。不會提高表面滑爽性或削弱再涂性。
BYK®-348 Byk 毕克 用於水性體系的硅樹脂表面活性劑。顯著降低表面張力,因而具有良好的基材滑爽性和流平性。無泡沫穩定性,不會提高表面滑爽性或削弱再涂性。適合用於無溶劑型水性配方。
BYK®-349 Byk 毕克 BYK®-349是一種用於水性體系的硅樹脂表面活性劑。BYK®-349特別適合基於丙烯酸、苯丙、丙烯酸 PU組合、可交聯聚氨酯和烘干體系的各種水性配方。
BYK®-410 Byk 毕克 液體流變助劑,適用於溶劑型和無溶劑涂料。添加后,它可增加體系的假塑性。其觸變性流動行為阻止了沉降和流挂。由於它是液態,易操作,甚至可以后添加。該助劑添加時無需特殊溫度控制
BYK®-411 Byk 毕克 用於溶劑型和無溶劑型涂料的液態流變添加劑。使用后可在體系內形成一種假塑性,其觸變型流動特性可以防止沉澱和流挂。由於產品呈液態,因而使用簡便。
BYK®-420 Byk 毕克 用於水性涂料和顏料濃縮漿的液體流變助劑,加入后能形成三維網絡,這樣形成的觸變流動性防止沉降和改善流挂性,應加入到研磨基料中。
BYK®-425 Byk 毕克 用於水性涂料和濃縮顏料的液態流變添加劑。適用於水性和水稀釋性體系。該添加劑可產生一種假塑性的流動特性,可以提高抗流挂性和抗沉澱性。不含VOC及APEO。與多種水性樹脂體系有廣泛的相容性。
BYK®-430 Byk 毕克 用於溶劑型體系(重型、防護型、抗腐蝕和一般工業涂料)的液態觸變控制添加劑。
BYK®-431 Byk 毕克 用於溶劑型體系的液態觸變控制添加劑。
BYK®-4509 Byk 毕克 BYK-4509 is an adhesion promoter for solvent-borne and aqueous systems applied to metallic substrates. It is compatible with most binders and is therefore ideal for universal use. This product is a salt of a polymer with acidic groups.
BYK®-4512 Byk 毕克 BYK®-4512 is an adhesion promoter for solvent-borne systems applied to metal substrates. It is particularly well-suited for use in chromate-free primers and on metal substrates that are pre-treated in a chromate-free manner.
BYK®-9076 Byk 毕克 BYK®-9076是一種高分子量助劑,適用於無溶劑膠粘劑和密封劑,BYK®-9076尤其適用於酸性和中性炭黑的穩定
BYK®-9077 Byk 毕克 用於無溶劑型濃縮顏料的新型高分子添加劑,用來穩定基本型碳黑。低黏度、高顏料承載量﹔在羥基官能聚醚/增塑劑等無溶劑型載體中穩定。
BYK®-A 515 Byk 毕克 BYK®-A 515是一種高表面活性脫氣劑,通常應用於丙烯酸體系阻止氣泡產生
BYK®-A 530 Byk 毕克 脫氣劑和消泡劑,適合溶劑型和無溶劑環氧體系
BYK®-A 535 Byk 毕克 無硅消泡劑/脫氣劑,適用於無溶劑和溶劑型環氧和PUR基膠粘劑和密封劑
BYK®-A 550 Byk 毕克 BYK®-A 550具有強脫氣效果,卻不會導致強霧影效果
BYK®-A 555 Byk 毕克 BYK®-A 555應用於各種膠粘劑具有最高效率
BYK®-DYNWET 800 Byk 毕克 BYK®-DYNWET 800是一種無硅表面助劑,適用於水性膠粘劑和密封劑。它可降低快速施工過程中的動態表面張力,從而改善基材潤濕性
BYK®-W 940 Byk 毕克 BYK®-W 940可阻止礦物填料例如碳酸鈣和三氫氧化鋁的沉降,並減少無機和有機顏料的浮色和發花
BYK®-W 961 Byk 毕克 BYK®-W 961可作為潤濕和分散劑,阻止礦物填料沉降
BYK®-W 966 Byk 毕克 BYK®-W 966可增加聚酯樹脂體系中各種最常用填料例如碳酸鈣和三氫氧化鋁的分散。它可降低粘度,從而使更高顏填料負載量成為可能,它還可防止沉降
BYK®-W 969 Byk 毕克 BYK®-W 969可作為膠粘劑和密封劑的潤濕和分散劑,並降低其粘度
BYK®-W 980 Byk 毕克 BYK®-W 980可增加各種最常用填料例如碳酸鈣和三氫氧化鋁的分散。它可降低粘度,從而使更高顏填料負載量成為可能,它還可防止沉降
BYK®-W 985 Byk 毕克 BYK®-W 985可增加最常用填料例如碳酸鈣和三氫氧化鋁的潤濕和分散速度。它可極大地降低粘度,從而使更高顏填料負載量成為可能。BYK®-W 985通常不起防沉降作用
CARBOBYK®-9810 Byk 毕克 CARBOBYK-9810 is a highly filled, water-borne carbon nanotube dispersion for enhancing mechanical properties, electrical conductivity, and antistatic behaviour. It is a dispersion of multi-walled carbon nanotubes in water. Incorporating carbon nanotubes i...展開 CARBOBYK-9810 is a highly filled, water-borne carbon nanotube dispersion for enhancing mechanical properties, electrical conductivity, and antistatic behaviour. It is a dispersion of multi-walled carbon nanotubes in water. Incorporating carbon nanotubes into coatings, printing inks, plastics, or adhesives enhances electrical and thermal conductivity, antistatic behaviour, mechanical properties, and shielding from electromagnetic waves. The additive is only recommended for water-borne systems. 收起
Ceraflour® 925 Byk 毕克 Ceraflour® 925 is a finely micronized wax additive for aqueous and solvent-borne systems for increasing slip with simultaneous improvement of scratch resistance. In can coatings and coil coatings, Ceraflour® 925 offers a good balance of scratch resistance...展開 Ceraflour® 925 is a finely micronized wax additive for aqueous and solvent-borne systems for increasing slip with simultaneous improvement of scratch resistance. In can coatings and coil coatings, Ceraflour® 925 offers a good balance of scratch resistance and surface slip. Within this, the additive has no negative influences on other coating properties such as substrate wetting, intercoat adhesion or compound adhesion. 收起
Claytone® 40 Byk 毕克 Claytone® 40是一種親有機膨潤土衍生物,用作觸變增稠劑和抗沉降劑,用於低到中等極性溶劑型塗料。這是一個傳統的有機粘土,需要添加活化劑以獲取充分的效能。作為親有機的蒙脫石產品,它可以在有機介質中溶脹,並建立一種凝膠結構(紙房狀構造)。單蒙脫石片層之間的弱氫鍵是此觸變凝膠結構的原因。為了獲取最佳效率,片層的完全分離是必要的(附聚物解聚成初級粒子完全分散)。
Claytone® AF Byk 毕克 Claytone® AF是一種改性蒙脫石,用於含低到中等極性的脂肪族溶劑和脂肪族 - 芳香族溶劑混合物的體系。Claytone®產生可重複的黏度和觸變控制,高程度流掛控制,並防止顏料沉降。Claytone® AF是自分散的,不需要極性活化劑。Claytone® AF無需高剪切力或預凝膠。
Claytone® APA Byk 毕克 Claytone® APA是一種改性蒙脫石,用於含中等到高極性的芳香族溶劑或芳香族氧化物溶劑混合物的體系。Claytone® APA具有高凝膠效率、可重複的黏度和觸變控制,高程度流掛控制,並防止顏料和填料沉降。
Claytone® HT Byk 毕克 Claytone® HT是一種改性蒙脫石,用於含低到中等極性的芳香族溶劑和脂肪族溶劑的體系。Claytone® HT具有高凝膠效率、可重複的黏度和觸變控制,高程度流掛控制,並防止顏料和填料沉降。本產品是一種高性能的流變助劑,用於在高性能的油性塗料,特別適合於工業、船舶和防護塗料。
Claytone® HY Byk 毕克 Claytone® HY是一種改性蒙脫石,用於低到中等極性的印刷油墨。Claytone® HY具有高凝膠效率、可增加黏度和屈服值,防止顏料聚集、沉降,減少起霧,並使油墨生產商可控制粘性粘度。
DISPERBYK®-118 Byk 毕克 DISPERBYK®-118 is a wetting and dispersing additive for solvent-borne systems to stabilize acidic, neutral and basic titanium dioxides, colored inorganic pigments, transparent iron oxides, fillers, and effect pigments. The additive improves the wetting an...展開 DISPERBYK®-118 is a wetting and dispersing additive for solvent-borne systems to stabilize acidic, neutral and basic titanium dioxides, colored inorganic pigments, transparent iron oxides, fillers, and effect pigments. The additive improves the wetting and dispersing of all inorganic fillers such as calcium carbonate and aluminum hydroxide (ATH). DISPERBYK®-118 is all-purpose for titanium dioxides. The additive causes lower viscosity and enables higher filler loading. 收起
DISPERBYK®-180 Byk 毕克 水性、溶劑型和無溶劑膠粘劑和密封劑用潤濕和分散劑
DISPERBYK®-190 Byk 毕克 水性膠粘劑和密封劑用潤濕和分散劑
DISPERBYK®-191 Byk 毕克 水性膠粘劑和密封劑用潤濕和分散劑
DISPERBYK®-192 Byk 毕克 水性膠粘劑和密封劑用潤濕和分散劑
DISPERBYK®-2152 Byk 毕克 DISPERBYK®-2152 is an emission-free, hyperbranched wetting and dispersing additive for solvent-free epoxy systems and other reactive systems. Achieving excellent deflocculation and stabilization requires an additive with highly efficient pigment-affinic g...展開 DISPERBYK®-2152 is an emission-free, hyperbranched wetting and dispersing additive for solvent-free epoxy systems and other reactive systems. Achieving excellent deflocculation and stabilization requires an additive with highly efficient pigment-affinic groups. In general, those pigment-affinic groups are aminic in nature and can react with the epoxy resins. Due to the special hyperbranched structure of DISPERBYK®-2152 the aminic pigment-affinic groups are encapsulated by polyester side chains; this prevents reaction with the epoxy resin, and, as a result, long-term storage stability is achieved. The additive contains no solvents or volatile components and fulfills the strict requirements of the German AgBB as well as French VOC standards 收起
GARAMITE® 1210 Byk 毕克 GARAMITE® 1210是一種獨特的流變助劑,開發用於乙烯基酯和不飽和聚酯體系。它推薦用於不飽和聚酯樹脂中,例如鄰苯二甲酸、間苯二甲酸、DCPD和PET樹脂。相比氣相矽土,該產品可提供改善的防流掛性能、流變控制和穩定性,更有效、生產中易操作(灰塵少、高體積密度,對剪切不敏感)
GARAMITE® 7303 Byk 毕克 GARAMITE®7303i采用了專利的混合礦物觸變膠(MMT)的技術開發。MMT技術提供的性能優勢是傳統的有機粘土添加劑不可能提供的。傳統的有機粘土是非常難以分散,通常要求非常高的剪切混合,以及一個極性活化劑以幫助剝離粘土片層的聚集。由於本產品的多粒子形貌,粉末很容易分散到油或溶劑中,只需中等剪切力。 相比於其他的增稠添加劑GARAMITE®7303i表現出非常獨特的流變曲線。可以通過將本品放入配方中獲得非常高的低剪切粘度,從而導致傑出的防沉降和抗脫水收縮性。然而,當施加剪切力時,粘度迅速降低,...展開 GARAMITE®7303i采用了專利的混合礦物觸變膠(MMT)的技術開發。MMT技術提供的性能優勢是傳統的有機粘土添加劑不可能提供的。傳統的有機粘土是非常難以分散,通常要求非常高的剪切混合,以及一個極性活化劑以幫助剝離粘土片層的聚集。由於本產品的多粒子形貌,粉末很容易分散到油或溶劑中,只需中等剪切力。 相比於其他的增稠添加劑GARAMITE®7303i表現出非常獨特的流變曲線。可以通過將本品放入配方中獲得非常高的低剪切粘度,從而導致傑出的防沉降和抗脫水收縮性。然而,當施加剪切力時,粘度迅速降低,該特性使其具有良好的施工性能。 收起
GARAMITE® 7305 Byk 毕克 GARAMITE® 7305采用了專利的混合礦物觸變膠(MMT)的技術開發。MMT技術提供的性能優勢是傳統的有機粘土添加劑不可能提供的。傳統的有機粘土是非常難以分散,通常要求非常高的剪切混合,以及一個極性活化劑以幫助剝離粘土片層的聚集。由於本產品的多粒子形貌,粉末很容易分散到油或溶劑中,只需中等剪切力。 相比於其他的增稠添加劑GARAMITE®7305表現出非常獨特的流變曲線。可以通過將本品放入配方中獲得非常高的低剪切粘度,從而導致傑出的防沉降和抗脫水收縮性。然而,當施加剪切力時,粘度迅速降低,該...展開 GARAMITE® 7305采用了專利的混合礦物觸變膠(MMT)的技術開發。MMT技術提供的性能優勢是傳統的有機粘土添加劑不可能提供的。傳統的有機粘土是非常難以分散,通常要求非常高的剪切混合,以及一個極性活化劑以幫助剝離粘土片層的聚集。由於本產品的多粒子形貌,粉末很容易分散到油或溶劑中,只需中等剪切力。 相比於其他的增稠添加劑GARAMITE®7305表現出非常獨特的流變曲線。可以通過將本品放入配方中獲得非常高的低剪切粘度,從而導致傑出的防沉降和抗脫水收縮性。然而,當施加剪切力時,粘度迅速降低,該特性使其具有良好的施工性能。它最適合用於中等到高極性體系。 收起
HIKOREZ A-1100 Kolon HIKOREZ A-1100 is a pale yellow thermoplastic resin. This product can be used as tackifier for pressure sensitive adhesives. HIKOREZ A-1100 can be used as the binder for hot melt road marking as well as a binder for hot melt road marking.
HIKOREZ A-1100S Kolon HIKOREZ A-1100S is a pale yellow thermoplastic resin which is primarily used as tackifier for pressure sensitive adhesives.
HIKOREZ A-1115 Kolon HIKOREZ A-1115 is a pale yellow thermoplastic resin which is used as tackifier for solvent based pressure sensitive adhesives, hot melt based pressure sensitive adhesives and hot melt adhesives.
HIKOREZ A-2115 Kolon HIKOREZ A-2115 is a pale yellow thermoplastic resin which is used as tackifier for solvent based pressure sensitive adhesives, hot melt based pressure sensitive adhesives and hot melt adhesives.
HIKOREZ C-1100 Kolon HIKOREZ C-1100 is a pale yellow thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins and diolefins derived from the process of thermal cracking of naphtha. The primary uses of this product are tackifier for pressure sensitive adhes...展開 HIKOREZ C-1100 is a pale yellow thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins and diolefins derived from the process of thermal cracking of naphtha. The primary uses of this product are tackifier for pressure sensitive adhesive, binder for hot melt road marking and rubber compounding agent for tires, tubes, rubber coated clothes and etc. 收起
HIKOREZ H-2100 Kolon HIKOREZ H-2100 is a light color thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins/diolefins derived from the process of thermal cracking of naphtha. The primary applications are hot melt based pressure sensitive adhesive, hot me...展開 HIKOREZ H-2100 is a light color thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins/diolefins derived from the process of thermal cracking of naphtha. The primary applications are hot melt based pressure sensitive adhesive, hot melt adhesive, because of its good compatibility with base polymer such as Styrene Isoprene Styrene and Ethylene Vinyl Acetate. 收起
HIKOREZ H-2130 Kolon HIKOREZ H-2130 is a light color thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins/diolefins derived from the process of thermal cracking of naphtha. The primary applications are hot melt based pressure sensitive adhesive, hot me...展開 HIKOREZ H-2130 is a light color thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins/diolefins derived from the process of thermal cracking of naphtha. The primary applications are hot melt based pressure sensitive adhesive, hot melt adhesive, because it is compatible with base polymer such as Styrene Isoprene Styrene and Ethylene Vinyl Acetate. 收起
HIKOREZ H-2200 Kolon HIKOREZ H-2200 is a light color thermoplastic resin which is primarily used as hot melt based pressure sensitive adhesive. HIKOREZ H-2200 also can be used as tackifier for hot melt adhesives, because of its good compatibility with base polymer such as Sty...展開 HIKOREZ H-2200 is a light color thermoplastic resin which is primarily used as hot melt based pressure sensitive adhesive. HIKOREZ H-2200 also can be used as tackifier for hot melt adhesives, because of its good compatibility with base polymer such as Styrene Butadiene Styrene and Styrene Isoprene Styrene. 收起
HIKOREZ H-2300 Kolon HIKOREZ H-2300 is a light color thermoplastic resin which is primarily applied to hot melt based pressure sensitive adhesives. HIKOREZ H-2300 also can be used as tackifier for hot melt adhesives because of its compatibility with base polymer such as Ethyl...展開 HIKOREZ H-2300 is a light color thermoplastic resin which is primarily applied to hot melt based pressure sensitive adhesives. HIKOREZ H-2300 also can be used as tackifier for hot melt adhesives because of its compatibility with base polymer such as Ethylene Vinyl Acetate and Styrene Isoprene Styrene. 收起
HIKOREZ R-1095 Kolon HIKOREZ R-1095 is a pale yellow thermoplastic resinwhich is primarily used as a binder for hot melt road marking.
HIKOREZ R-1100S Kolon HIKOREZ R-1100S is a pale yellow thermoplastic which is used primarily as a binder for hot melt road marking.
HIKOREZ T-1080 Kolon HIKOREZ T-1080 is a pale yellow thermoplastic resin which is primarily used as tackifier for solvent based pressure sensitive adhesives, hot melt based pressure sensitive adhesives and hot melt adhesives.
HIKOREZ T-1095 Kolon HIKOREZ T-1095 is a pale yellow thermoplastic resin which is primarily used as hot melt based pressure sensitive adhesives, especially Stryene-Isoprene-Styrene based PSA. HIKOREZ T-1095 also can be used as tackifier for hot melt adhesives.
HIKOREZ T-1100 Kolon HIKOREZ T-1100 is a pale yellow thermoplastic resin which is primarily used as tackifier for solvent based pressure sensitive adhesives, hot melt based pressure sensitive adhesives and hot melt adhesives.
HIKOREZ T-2093 Kolon HIKOREZ T-2093 is a pale yellow thermoplastic resin which is primarily used as in hot melt based pressure sensitive adhesives, especially Stryene-Isoprene-Styrene based PSA. HIKOREZ T-2093 also can be used as tackifier for hot melt adhesives because of i...展開 HIKOREZ T-2093 is a pale yellow thermoplastic resin which is primarily used as in hot melt based pressure sensitive adhesives, especially Stryene-Isoprene-Styrene based PSA. HIKOREZ T-2093 also can be used as tackifier for hot melt adhesives because of its compatibility with base polymer such as EVA. 收起
HIKOREZ T-3100 Kolon HIKOREZ T-3100 is a modified aliphatic hydrocarbon resin. HIKOREZ T-3100 was developed for solvent based pressure sensitive adhesive tapes, hot melt pressure adhesives and hot melt adhesives.
HIKOTACK DP-100 Kolon HIKOTACK DP-100 is pale yellow thermoplastic resin. HIKOTACK DP-100 can be used as a vehicle for paint products as well as a tackifier for EVA based hot melt adhesives.
HIKOTACK P-110S Kolon HIKOTACK P-110S is a pale yellow thermoplastic resin which is primarily used as a vehicle in the coating industry and as a tackifier for Ethylene Vinyl Acetate based hot melt adhesives. HIKOTACK P-110S can be also used as water repellent agent, concrete c...展開 HIKOTACK P-110S is a pale yellow thermoplastic resin which is primarily used as a vehicle in the coating industry and as a tackifier for Ethylene Vinyl Acetate based hot melt adhesives. HIKOTACK P-110S can be also used as water repellent agent, concrete curing agent and binder for asphalt. 收起
HIKOTACK P-120H Kolon HIKOTACK P-120H is pale yellow thermoplastic resin which is primarily used as a modifying resin for paint & ink products and hot melt adhesives.
HIKOTACK P-120HS Kolon HIKOTACK P-120HS is pale yellow thermoplastic resin. HIKOTACK P-120HS has a relatively higher softening point than HIKOTACK P-120, and is mainly used as a vehicle for paint and ink products, water repellent agents, concrete curing agent and binder for asp...展開 HIKOTACK P-120HS is pale yellow thermoplastic resin. HIKOTACK P-120HS has a relatively higher softening point than HIKOTACK P-120, and is mainly used as a vehicle for paint and ink products, water repellent agents, concrete curing agent and binder for asphalt. 收起
HIKOTACK P-120P Kolon HIKOTACK P-120P is pale yellow thermoplastic resin which is primarily used as a vehicle for other chemicals in the coating industry and tackifier for Ethylene Vinyl Acetate based hot melt adhesives.
HIKOTACK P-120S Kolon HIKOTACK P-120S is pale yellow thermoplastic resin which is primarily used as tackifier for Ethylene Vinyl Acetate based hot melt adhesives. HIKOTACK P-120S can be also used as water repellent agent, concrete curing agent, and binder for asphalt.
HIKOTACK P-140 Kolon HIKOTACK P-140 is pale yellow thermoplastic resin which is primarily used as a vehicle for printing ink. HIKOTACK P-140 is compatible with rosin modified phenolic resin, so it can be used with phenolic resin in off-set ink to decrease the set time and inc...展開 HIKOTACK P-140 is pale yellow thermoplastic resin which is primarily used as a vehicle for printing ink. HIKOTACK P-140 is compatible with rosin modified phenolic resin, so it can be used with phenolic resin in off-set ink to decrease the set time and increase the gloss. HIKOTACK P-140 can also be used as binder for color asphalt and tackifier for EVA based hot melt adhesives. 收起
HIKOTACK P-150 Kolon HIKOTACK P-150 is pale yellow thermoplastic resin which is primarily used as a vehicle for ink. HIKOTACK P-150 is compatible with rosin modified phenolic resin, which means it can be used with phenolic resin in off-set ink to decrease the set time and inc...展開 HIKOTACK P-150 is pale yellow thermoplastic resin which is primarily used as a vehicle for ink. HIKOTACK P-150 is compatible with rosin modified phenolic resin, which means it can be used with phenolic resin in off-set ink to decrease the set time and increase the gloss. 收起
HIKOTACK P-90 Kolon HIKOTACK P-90 is pale yellow thermoplastic resin that can be used as tackifier for Ethylene Vinyl Acetate based hot melt adhesives, water repellent agent, concrete curing agent and binder for asphalt.
HIKOTACK P-90HS Kolon HIKOTACK P-90HS is pale yellow thermoplastic resin which is used as tackifier for Ethylene Vinyl Acetate based hot melt adhesives, water repellent agent, concrete curing agent and binder for asphalt.
HIKOTACK P-90I Kolon HIKOTACK P-90I is pale yellow thermoplastic resin which is primarily used tackifier for Ethylene Vinyl Acetate copolymer based hot melt adhesives. HIKOTACK P-90I is compatible with numerous polymers as well as EVA, and provides good solubility with vario...展開 HIKOTACK P-90I is pale yellow thermoplastic resin which is primarily used tackifier for Ethylene Vinyl Acetate copolymer based hot melt adhesives. HIKOTACK P-90I is compatible with numerous polymers as well as EVA, and provides good solubility with various solvents. 收起
HIKOTACK P-90S Kolon HIKOTACK P-90S is pale yellow thermoplastic resin n be used as tackifier for Ethylene Vinyl Acetate based hot melt adhesives, water repellent agent, concrete curing agent and binder for asphalt.
HIKOTACK(CIR) C-120 Kolon HIKOTACK(CIR) C-120 is a kind of thermoplastic aromatic resin which is used as vehicle for paint varnish and various types of ink.
HIKOTACK(CIR) C-90 Kolon HIKOTACK(CIR) C-90 is a kind of thermoplastic aromatic resin, which is produced through the polymerization of ingredients such as Styrene, Coumarone and Indenet. HIKOTACK(CIR) C-90 is mainly used in the rubber industry.
Laponite® RD Byk 毕克 Laponite® RD是一種人工合成的層狀矽酸鹽。它不溶於水,但水合物和膨脹後成為清澈無色的膠體分散體。在水中2%或更高濃度時,會產生高觸變性凝膠。本產品用於各種水性配方,為其賦予剪切敏感特性。這些包括家用和工業表面塗料,清潔劑,陶瓷釉料,農用化學品,油田和園藝產品。