| 30% Mixed Tocopherol Powder | Xi'an Healthful Biotechnology Co. Ltd. | 30% Mixed Tocopherol Powder is a water-dispersible fine powder with a light tan color. This product provides a bland odor and taste. It is used as an antioxidant in nutritional supplements, and it differs from other tocopherol powders by having a soy bean...展開 30% Mixed Tocopherol Powder is a water-dispersible fine powder with a light tan color. This product provides a bland odor and taste. It is used as an antioxidant in nutritional supplements, and it differs from other tocopherol powders by having a soy bean oil content ranging from 5 - 10%, a maltodextrin content ranging from 50-60%, and a minimum nature mixed tocopherols content of 30%. 收起 | |
| Alipure® | AlzChem Shanghai Co. Ltd. | Alipure® is a highly pure solvent-free form of alpha lipoic acid that appears as a yellowish crystalline powder. It can be used as a food supplement and antioxidant. This product is unique in that it is universally soluble, having both water- and fat-solu...展開 Alipure® is a highly pure solvent-free form of alpha lipoic acid that appears as a yellowish crystalline powder. It can be used as a food supplement and antioxidant. This product is unique in that it is universally soluble, having both water- and fat-soluble properties, offering antioxidant protection against free radicals inside and outside the body’s cells. Alpha lipoic acid is readily absorbed when taken orally. This product can be used in functional food applications. 收起 | |
| Alipure® PG | AlzChem Shanghai Co. Ltd. | Alipure® PG is a highly pure solvent-free form of alpha lipoic acid that appears as a yellowish crystalline powder. It can be used as a food supplement and antioxidant. This product is unique in that it is universally soluble, having both water- and fat-s...展開 Alipure® PG is a highly pure solvent-free form of alpha lipoic acid that appears as a yellowish crystalline powder. It can be used as a food supplement and antioxidant. This product is unique in that it is universally soluble, having both water- and fat-soluble properties, offering antioxidant protection against free radicals inside and outside the body’s cells. Alpha lipoic acid is readily absorbed when taken orally. This product can be used in pharmaceutical and functional food applications. 收起 | |
| Alipure® WS | AlzChem Shanghai Co. Ltd. | Alipure® WS is a highly pure solvent-free form of alpha lipoic acid that appears as a yellowish crystalline powder. It can be used as a food supplement and antioxidant. This product is unique in that it is universally soluble, having both water- and fat-s...展開 Alipure® WS is a highly pure solvent-free form of alpha lipoic acid that appears as a yellowish crystalline powder. It can be used as a food supplement and antioxidant. This product is unique in that it is universally soluble, having both water- and fat-soluble properties, offering antioxidant protection against free radicals inside and outside the body’s cells. Alpha lipoic acid is readily absorbed when taken orally. This product can be used in functional food applications. 收起 | |
| Aloe Vera Gel Freeze Dried Powder | Xi'an Healthful Biotechnology Co. Ltd. | Aloe Vera Gel Freeze Dried Powder is an extract of fresh aloe vera leaves. This product has an off-white powder appearance and is used in food applications such as juice, yogurt and jellies. Aloe Vera Gel Freeze Dried Powder differs from spray dried powde...展開 Aloe Vera Gel Freeze Dried Powder is an extract of fresh aloe vera leaves. This product has an off-white powder appearance and is used in food applications such as juice, yogurt and jellies. Aloe Vera Gel Freeze Dried Powder differs from spray dried powder by having a maximum water content of 5%. 收起 | |
| Aloe Vera Gel Spray Dried Powder | Xi'an Healthful Biotechnology Co. Ltd. | Aloe Vera Gel Spray Dried Powder is an extract of fresh aloe vera leaves. This product has an off-white powder appearance and is used in food applications such as juice, yogurt and jellies. Aloe Vera Gel Spray Dried Powder differs from freeze dried powder...展開 Aloe Vera Gel Spray Dried Powder is an extract of fresh aloe vera leaves. This product has an off-white powder appearance and is used in food applications such as juice, yogurt and jellies. Aloe Vera Gel Spray Dried Powder differs from freeze dried powder by having a maximum water content of 8%. 收起 | |
| Beta-Carotene Oil Suspension | Xi'an Healthful Biotechnology Co. Ltd. | Beta-Carotene Oil Suspension is a colorant and nutritional precursor of Vitamin E. This product provides antioxidants that quench free radicals and hazardous molecules that can damage cells. It is used for fortification and coloration of oil-based foods. | |
| Beta-Carotene Powder | Xi'an Healthful Biotechnology Co. Ltd. | Beta-Carotene Powder is a colorant and nutritional precursor of Vitamin E. This product provides antioxidants that quench free radicals and hazardous molecules that can damage cells. It is used for fortification and coloration of foods and drinks such as ...展開 Beta-Carotene Powder is a colorant and nutritional precursor of Vitamin E. This product provides antioxidants that quench free radicals and hazardous molecules that can damage cells. It is used for fortification and coloration of foods and drinks such as juices and cakes. It can also be used as a nutrient material in dietary supplements. 收起 | |
| BLUESIL RTV 1556 A | Elkem Silicones | BLUESIL RTV 1556 is a two component, high strength, addition cure, room temperature or heat vulcanized silicone rubber compound. Designed specifically for moldmaking and resin infusion vacuum bag applications, it offers low viscosity, high tear cut resist...展開 BLUESIL RTV 1556 is a two component, high strength, addition cure, room temperature or heat vulcanized silicone rubber compound. Designed specifically for moldmaking and resin infusion vacuum bag applications, it offers low viscosity, high tear cut resistance, and easy release for long lasting molds. BLUESIL RTV 1556 has high temperature and chemical resistance with excellent flexibility, low shrinkage, and excellent detail reproduction which makes it well suited for production and prototyping use with all types of casting resins. 收起 | |
| BLUESIL RTV 1556 FC B | Elkem Silicones | BLUESIL RTV 1556 is a two component, high strength, addition cure, room temperature or heat vulcanized silicone rubber compound. Designed specifically for moldmaking and resin infusion vacuum bag applications, it offers low viscosity, high tear cut resist...展開 BLUESIL RTV 1556 is a two component, high strength, addition cure, room temperature or heat vulcanized silicone rubber compound. Designed specifically for moldmaking and resin infusion vacuum bag applications, it offers low viscosity, high tear cut resistance, and easy release for long lasting molds. BLUESIL RTV 1556 has high temperature and chemical resistance with excellent flexibility, low shrinkage, and excellent detail reproduction which makes it well suited for production and prototyping use with all types of casting resins. 收起 | |
| BLUESIL RTV 3428 A | Elkem Silicones | BLUESIL RTV 3428 A is a two component silicone elastomer which cures at room temperature by a polyaddition reaction. This reaction can be accelerated by heat. | |
| BLUESIL RTV 3536 P A | Elkem Silicones | BLUESIL RTV 3536 P A&B is a two-component silicone elastomer which cures at room temperature by a polyaddition reaction and leads to a flexible and elastic material. | |
| Corn Flour | Rohan International | Corn Flour is obtained from naturally cultivated raw maize, grown using natural manure. It is a yellowish cream color, with excellent taste, and high nutritional value. Corn Flour is used in biscuits, pasta, papad, cookies, and pastries. | |
| Cranberry Extract | Xi'an Healthful Biotechnology Co. Ltd. | Cranberry Extract appears as a deep violet fine powder. This product provides nutrients that protect eyes from eyestrain or fatigue, and it can activate blood circulation around the eyes. Cranberry Extract is used for its antioxidants in tea and drinks. | |
| Creapure® | AlzChem Shanghai Co. Ltd. | Creapure® is a fine, colorless-to-slightly-yellow, odorless powder derived from chemical synthesis. It is an ultra pure creatine monohydrate that is used to improve muscle performance. This product is used as a food additive and dietary supplement for the...展開 Creapure® is a fine, colorless-to-slightly-yellow, odorless powder derived from chemical synthesis. It is an ultra pure creatine monohydrate that is used to improve muscle performance. This product is used as a food additive and dietary supplement for the sports nutrition industry. It is used in functional food and nutritional supplement applications. 收起 | |
| Creapure® AH | AlzChem Shanghai Co. Ltd. | Creapure® AH is a fine white powder derived from chemical synthesis. It is an ultra pure creatine anhydrous that is used to improve muscle performance. This product is used as a food additive and dietary supplement for the sports nutrition industry. It is...展開 Creapure® AH is a fine white powder derived from chemical synthesis. It is an ultra pure creatine anhydrous that is used to improve muscle performance. This product is used as a food additive and dietary supplement for the sports nutrition industry. It is used in functional food and nutritional supplement applications. 收起 | |
| Creapure® Citrate | AlzChem Shanghai Co. Ltd. | Creapure® Citrate is a fine, colorless-to-slightly-yellow powder, with a faint odor, derived from chemical synthesis. It is an ultra pure creatine citrate that is used to improve muscle performance. This product is used as a food additive and dietary supp...展開 Creapure® Citrate is a fine, colorless-to-slightly-yellow powder, with a faint odor, derived from chemical synthesis. It is an ultra pure creatine citrate that is used to improve muscle performance. This product is used as a food additive and dietary supplement for the sports nutrition industry. It is used in functional food and nutritional supplement applications. 收起 | |
| Creapure® PG | AlzChem Shanghai Co. Ltd. | Creapure® PG is a fine, colorless-to-slightly-yellow, odorless powder derived from chemical synthesis. It is an ultra pure creatine monohydrate that is used to improve muscle performance. This product is used as a food additive and dietary supplement for ...展開 Creapure® PG is a fine, colorless-to-slightly-yellow, odorless powder derived from chemical synthesis. It is an ultra pure creatine monohydrate that is used to improve muscle performance. This product is used as a food additive and dietary supplement for the sports nutrition industry. It is used in pharmaceutical, nutritional supplement, and functional food applications. 收起 | |
| Creapure® pH 10 | AlzChem Shanghai Co. Ltd. | Creapure® pH 10 is a colorless, odorless solid derived from chemical synthesis. It is a buffered creatine monohydrate that is used to improve muscle performance. This product is used as a food additive and dietary supplement for the sports nutrition indus...展開 Creapure® pH 10 is a colorless, odorless solid derived from chemical synthesis. It is a buffered creatine monohydrate that is used to improve muscle performance. This product is used as a food additive and dietary supplement for the sports nutrition industry. It is used in functional food and nutritional supplement applications. 收起 | |
| D-α-tocopherol Acid Polyethylene Glycol 1000 Succinate (TPGS) | Xi'an Healthful Biotechnology Co. Ltd. | D-α-tocopherol Acid Polyethylene Glycol 1000 Succinate (TPGS) is a light yellow to yellow waxy solid derived from natural sources such as edible vegetable oils. The product is a water-soluble form of Vitamin E intended for use in dietary supplements. | |
| D-Alpha Tocopherol Oil | Xi'an Healthful Biotechnology Co. Ltd. | D-Alpha Tocopherol Oil is a clear, dark amber viscous oil with a mild taste and odor. This product is derived from edible vegetable oils, and is used for its high content of Vitamin E in dietary supplements. It has a maximum soy bean oil content of 32.9% ...展開 D-Alpha Tocopherol Oil is a clear, dark amber viscous oil with a mild taste and odor. This product is derived from edible vegetable oils, and is used for its high content of Vitamin E in dietary supplements. It has a maximum soy bean oil content of 32.9% and a minimum d-alpha tocopherol content of 67.1%. 收起 | |
| D-Alpha Tocopheryl Acetate | Xi'an Healthful Biotechnology Co. Ltd. | D-Alpha Tocopheryl Acetate is a clear, dark amber viscous oil with a mild taste and odor. This product is derived from edible vegetable oils, and it provides a high source of Vitamin E. It is intended for use in dietary supplements. It has a maximum soy b...展開 D-Alpha Tocopheryl Acetate is a clear, dark amber viscous oil with a mild taste and odor. This product is derived from edible vegetable oils, and it provides a high source of Vitamin E. It is intended for use in dietary supplements. It has a maximum soy bean oil content of 26.47% and a minimum d-alpha tocopheryl acetate content of 73.53%. 收起 | |
| D-Alpha Tocopheryl Acid Succinate | Xi'an Healthful Biotechnology Co. Ltd. | D-Alpha Tocopheryl Acid Succinate is a white to off white crystalline powder with little or no odor. This product provides a high source of Vitamin E and is used in dietary supplements. | |
| Ferulic Acid | Xi'an Healthful Biotechnology Co. Ltd. | Ferulic Acid is an off-white to light yellow crystalline powder extracted from rice bran oil. This product provides antioxidants and is used in applications such as candy, cookies, jelly and beverages. | |
| GalactoFructose Solactis® | Solvay Solactis | GalactoFructose Solactis® is a white to cream powder that is a sweet tasting, functional ingredient naturally originating from milk. This product is used in food products such as dairy, cereal and baby foods, and as a dietary supplement. GalactoFructose S...展開 GalactoFructose Solactis® is a white to cream powder that is a sweet tasting, functional ingredient naturally originating from milk. This product is used in food products such as dairy, cereal and baby foods, and as a dietary supplement. GalactoFructose Solactis® is beneficial to gut health, mineral balance and weight management. It offers an excellent resistance to heat treatment and acidity. 收起 | |
| Gamma-Oryzanol | Xi'an Healthful Biotechnology Co. Ltd. | Gamma-Oryzanol is a white to off-white crystalline powder. This product is extracted and refined from rice bran oil, and it is used as an antioxidant in nutritional foods. | |
| Lutein Oil Suspension | Xi'an Healthful Biotechnology Co. Ltd. | Lutein Oil Suspension is a natural carotenoid. It is used for oil-based foods. | |
| Lutein Powder | Xi'an Healthful Biotechnology Co. Ltd. | Lutein Powder is a natural carotenoid. It is used as a nutrient material in dietary supplements. | |
| Lutein-CWD | Xi'an Healthful Biotechnology Co. Ltd. | Lutein-CWD is a natural carotenoid that is cold water dispersible. It is used for water-based foods like beverages and instant foods. | |
| Lycopene 5%-90% | Xi'an Healthful Biotechnology Co. Ltd. | Lycopene 5%-90% is a carotenoid. This product can provide a red coloration for foods. It is used as a nutrient material in the dietary supplements. | |
| Lycopene Oil Suspension | Xi'an Healthful Biotechnology Co. Ltd. | Lycopene Oil Suspension is a carotenoid. This product can provide a red coloration for foods. It is used for oil-based foods. | |
| Lycopene-CWD | Xi'an Healthful Biotechnology Co. Ltd. | Lycopene-CWD is a carotenoid that is cold water dispersible. This product can provide a red coloration for foods. It is used for water-based foods like beverages and instant food. | |
| Micro-Capsule Phytosterol Ester | Xi'an Healthful Biotechnology Co. Ltd. | Micro-Capsule Phytosterol Ester is a fine powdered blend. This product is intended for use in beverages and other aqueous-based food system and used in dry mixes or instant product formulas. | |
| Microencapsulated Astaxanthin Powder | Xi'an Healthful Biotechnology Co. Ltd. | Microencapsulated Astaxanthin Powder is a natural carotenoid that is cold water dispersible. This product provides a high source of antioxidants and Vitamin E, and it is often used in functional foods. | |
| Mixed Tocopherol Oil 50% | Xi'an Healthful Biotechnology Co. Ltd. | Mixed Tocopherol Oil 50% is a clear brownish-red viscous oil with a mild taste and odor. This product is used as an antioxidant in nutritional supplements. It differs from other tocopherol oils by having a maximum soy bean oil content of 50% and a minimum...展開 Mixed Tocopherol Oil 50% is a clear brownish-red viscous oil with a mild taste and odor. This product is used as an antioxidant in nutritional supplements. It differs from other tocopherol oils by having a maximum soy bean oil content of 50% and a minimum nature mixed tocopherols content of 50%. 收起 | |
| Mixed Tocopherol Oil 70% | Xi'an Healthful Biotechnology Co. Ltd. | Mixed Tocopherol Oil 70% is a clear brownish-red viscous oil with a mild taste and odor. This product is used as an antioxidant in nutritional supplements. It differs from other tocopherol oils by having a maximum soy bean oil content of 30% and a minimum...展開 Mixed Tocopherol Oil 70% is a clear brownish-red viscous oil with a mild taste and odor. This product is used as an antioxidant in nutritional supplements. It differs from other tocopherol oils by having a maximum soy bean oil content of 30% and a minimum nature mixed tocopherols content of 70%. 收起 | |
| Mixed Tocopherol Oil 90% | Xi'an Healthful Biotechnology Co. Ltd. | Mixed Tocopherol Oil 90% is a clear brownish-red viscous oil with a mild taste and odor. This product is used as an antioxidant in nutritional supplements. It differs from other tocopherol oils by having a maximum soy bean oil content of 10% and a minimum...展開 Mixed Tocopherol Oil 90% is a clear brownish-red viscous oil with a mild taste and odor. This product is used as an antioxidant in nutritional supplements. It differs from other tocopherol oils by having a maximum soy bean oil content of 10% and a minimum nature mixed tocopherols content of 90%. 收起 | |
| Natural Astaxanthin Oleoresin | Xi'an Healthful Biotechnology Co. Ltd. | Natural Astaxanthin Oleoresin is a natural carotenoid. This product provides a high source of antioxidants and Vitamin E, and it is often used in functional foods. | |
| Natural Astaxanthin Powder | Xi'an Healthful Biotechnology Co. Ltd. | Natural Astaxanthin Powder is a natural carotenoid. This product is used in functional foods, and it provides a high amount of antioxidants and vitamin E. | |
| Phytosteorl WD | Xi'an Healthful Biotechnology Co. Ltd. | Phytosteorl WD is a powdered blend that has been spray dried into a water dispersible formulation. This product is intended for use in beverages, other aqueous-based food systems and instant product formulas. | |
| Phytosterol Ester | Xi'an Healthful Biotechnology Co. Ltd. | Phytosterol Ester is a yellow viscous oily paste. This product has a fatty odor and taste, and it is obtained by esterification of soybean phytosterols with fatty acids obtained from vegetable oil. It is used in dietary supplements. | |
| Phytosterol Powder | Xi'an Healthful Biotechnology Co. Ltd. | Phytosterol Powder is a finely ground powder derived from soybean oil distillates. This product is intended for use as an antioxidant in dietary supplements. | |
| Rice Flour | Rohan International | Rice Flour is produced from polished raw rice and is gluten free. It is in the form of finely ground powder, has no odor, and is a natural white color. Rice Flour is used cereals, crackers, chips, snacks, baking mixes, sweets, dough, and pasta. | |
| SILBIONE CAF 72576 RED | Elkem Silicones | SILBIONE CAF 72576 RED is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 a...展開 SILBIONE CAF 72576 RED is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILBIONE CAF 72589 | Elkem Silicones | SILBIONE CAF 72589 is a one component silicone elastomer, curing at room temperature on contact with atmospheric humidity, used to treat natural or agglomerated bottle corks. SILBIONE CAF 72589 is a solventless product based on reactive polymethyl siloxan...展開 SILBIONE CAF 72589 is a one component silicone elastomer, curing at room temperature on contact with atmospheric humidity, used to treat natural or agglomerated bottle corks. SILBIONE CAF 72589 is a solventless product based on reactive polymethyl siloxane oils and inert fillers. It can be used as a release coating for materials intended for food contact. 收起 | |
| SILBIONE DISPERSION CAF 70004 | Elkem Silicones | SILBIONE DISPERSION CAF 70004 is a one component silicone elastomer, curing at room temperature on contact with atmospheric humidity, used to treat agglomerated bottle corks and especially champagne corks. SILBIONE DISPERSION CAF 70004 is a product based ...展開 SILBIONE DISPERSION CAF 70004 is a one component silicone elastomer, curing at room temperature on contact with atmospheric humidity, used to treat agglomerated bottle corks and especially champagne corks. SILBIONE DISPERSION CAF 70004 is a product based on reactive polymethyl siloxane oils and inert fillers. It can be used as a release coating for materials intended for food contact. 收起 | |
| SILBIONE DISPERSION CAF 71500 GRY | Elkem Silicones | SILBIONE DISPERSION CAF 71500 GRY is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS ...展開 SILBIONE DISPERSION CAF 71500 GRY is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILBIONE DISPERSION CAF 71528 | Elkem Silicones | SILBIONE DISPERSION CAF 71528 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF ...展開 SILBIONE DISPERSION CAF 71528 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILBIONE DISPERSION CAF 71550 | Elkem Silicones | SILBIONE DISPERSION CAF 71550 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF ...展開 SILBIONE DISPERSION CAF 71550 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILBIONE FLD 70047V100 | Elkem Silicones | SILBIONE FLD 70047 V 100, V 200 and V 350 are linear POLYDIMETHYLSILOXANES. | |
| SILBIONE FLD 70047V12 500 | Elkem Silicones | SILBIONE FLD 70047 V 12 500 to V 300 000 are linear POLYDIMETHYLSILOXANES. Refer to the regulatory attestation for the conformance to any regulated applications. | |
| SILBIONE FLD 70047V30 000 | Elkem Silicones | SILBIONE FLD 70047V30 000 is a linear POLYDIMETHYLSILOXANES. Refer to the regulatory attestation for the conformance to any regulated applications. | |
| SILBIONE FLD 70047V300 000 | Elkem Silicones | SILBIONE FLD 70047V300 000 is a linear POLYDIMETHYLSILOXANES. Refer to the regulatory attestation for the conformance to any regulated applications. | |
| SILBIONE PASTE 70428 | Elkem Silicones | SILBIONE PASTE 70428 is a mixture of polydimethylsiloxane oil and inert filler. This paste is recommended for lubricating installations and equipment to process or package foodstuffs. It can therefore, occasionally, be in contact with foodstuffs. The comp...展開 SILBIONE PASTE 70428 is a mixture of polydimethylsiloxane oil and inert filler. This paste is recommended for lubricating installations and equipment to process or package foodstuffs. It can therefore, occasionally, be in contact with foodstuffs. The composition of SILBIONE Paste 70428 meets the regulations in force in the following countries: FRANCE : Brochure n° 1 227 of the Journal Officiel de la République Française. For aqueous contact only. Tolerated provided the user checks that the paste does not penetrate into the foodstuffs and that if the machinery overheats it does not release any substances which might affect the foodstuff. NB: BLUESTAR SILICONES has checked, by heating SILBIONE Paste 70428 at 150°C for 24 hours, that the product does not release any toxic substances. Circular of 26 Mai 1971 on materials in contact with foodstuffs. GERMANY: Bundesgesundheitsamt Recommendations BGA chapter XV A on « Silicones ». Tolerated provided the user checks that the product does not affect either the odour or the taste of foodstuffs with which it might be in contact. USA: FDA Regulations under paragraph 178 3570 of the Code of Federal Regulations, part 21, on « Lubricants with incidental food contact ». For other countries, please consult us. 收起 | |
| SILBIONE PRIM 70073 | Elkem Silicones | SILBIONE PRIMER 70073 is an adhesion promoter for SILBIONE CAF and SILBIONE CAF DISPERSIONS (one component room temperature curing silicone elastomers). | |
| SILBIONE RES 76405 | Elkem Silicones | SILBIONE RESINE 76405 is a polymethylphenyl-siloxane resin supplied as 50% solution in toluene. SILBIONE RESINE 76405 is used as release coating for materials that will be in contact with foodstuff. This resin can also be used as a binder in paints develo...展開 SILBIONE RESINE 76405 is a polymethylphenyl-siloxane resin supplied as 50% solution in toluene. SILBIONE RESINE 76405 is used as release coating for materials that will be in contact with foodstuff. This resin can also be used as a binder in paints developed to protect and decorate these materials. The products obtained after crosslinking of SILBIONE RESINE 76405 contain only substances permitted by the Food Contact regulations currently in force. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coatings obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILCOLAPSE 7140 | Elkem Silicones | SILCOLAPSE 7140 is a non-ionic aqueous emulsion containing dimethylpoly- siloxane, and is highly effective for prevention, control and elimination of foam in aqueous media. SILCOLAPSE 7140 has many applications in food industry. It can also be used in ind...展開 SILCOLAPSE 7140 is a non-ionic aqueous emulsion containing dimethylpoly- siloxane, and is highly effective for prevention, control and elimination of foam in aqueous media. SILCOLAPSE 7140 has many applications in food industry. It can also be used in industrial applications requiring a high level of purity. 收起 | |
| SILCOLEASE ADD 702 | Elkem Silicones | SILCOLEASE ADD 702 is a white, granular powder, freely soluble in water and possessing a slight odour of ammonia. It is used with emulsion SILCOLEASE polyaddition or polycondensation release systems to improve hold-out of the silicone. | |
| SILCOLEASE EMUL RCA 954 | Elkem Silicones | SILCOLEASE EMULSION RCA 954 is a non ionic aqueous emulsion. It is used as a tight release additive in emulsion paper coating applications and serves to increase the peeling force required to separate the pressure sensitive adhesive from the siliconised r...展開 SILCOLEASE EMULSION RCA 954 is a non ionic aqueous emulsion. It is used as a tight release additive in emulsion paper coating applications and serves to increase the peeling force required to separate the pressure sensitive adhesive from the siliconised release liner. This RCA emulsion is used as a RCA in polyaddition type emulsions in the SILCOLEASE range. 收起 | |
| SILCOLEASE EMULSION 902 | Elkem Silicones | SILCOLEASE EMULSION 902 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates. SILCOLEASE EMULSION 902 cures by a polyaddition reaction in the presence of an organometallic compound forming an ELASTOMERIC COATING. ...展開 SILCOLEASE EMULSION 902 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates. SILCOLEASE EMULSION 902 cures by a polyaddition reaction in the presence of an organometallic compound forming an ELASTOMERIC COATING. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION 907 | Elkem Silicones | SILCOLEASE EMULSION 907 is a SILICONE EMULSION and is used as the base polymer in a three part formulation intended for the RELEASE COATING OF PAPERS, and various other substrates. SILCOLEASE EMULSION 907 cures by a polyaddition reaction in the presence o...展開 SILCOLEASE EMULSION 907 is a SILICONE EMULSION and is used as the base polymer in a three part formulation intended for the RELEASE COATING OF PAPERS, and various other substrates. SILCOLEASE EMULSION 907 cures by a polyaddition reaction in the presence of suitable emulsions of crosslinker and an organometallic catalyst, for example (e.g. SILCOLEASE EMULSION XL 969 and SILCOLEASE EMULSION CATA 903) to give an ELASTOMERIC type coating. It may be used to coat substrates that meet “food contact application” requirements. 收起 | |
| SILCOLEASE EMULSION 908 | Elkem Silicones | SILCOLEASE EMULSION 908 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates. SILCOLEASE EMULSION 908 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION...展開 SILCOLEASE EMULSION 908 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates. SILCOLEASE EMULSION 908 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION CATALYST 903, producing an ELASTOMERIC COATING. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION 912 | Elkem Silicones | SILCOLEASE EMULSION 912 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMULSION 912 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION...展開 SILCOLEASE EMULSION 912 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMULSION 912 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION CATALYST 913 producing an elastomeric coating. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION 915 | Elkem Silicones | SILCOLEASE EMULSION 915 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMULSION 915 cures by a polyaddition reaction in the presence of an organometallic compound forming an elastomeric coating. ...展開 SILCOLEASE EMULSION 915 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMULSION 915 cures by a polyaddition reaction in the presence of an organometallic compound forming an elastomeric coating. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION 925 | Elkem Silicones | SILCOLEASE EMUL 925 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMUL 925 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION CATALYS...展開 SILCOLEASE EMUL 925 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMUL 925 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION CATALYST 903, producing an elastomeric coating. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION CATA 903 | Elkem Silicones | SILCOLEASE EMULSION CATALYST 903 is an emulsion of reactive silicone polymers combined with an organometallic catalyst. It is an EMULSION CATALYST to be used in conjunction with a silicone emulsion intended for RELEASE COATING OF PAPERS and various substr...展開 SILCOLEASE EMULSION CATALYST 903 is an emulsion of reactive silicone polymers combined with an organometallic catalyst. It is an EMULSION CATALYST to be used in conjunction with a silicone emulsion intended for RELEASE COATING OF PAPERS and various substrates, for example SILCOLEASE EMULSION 908. It is recommended uniquely for the catalysis of polyaddition type reactions. 收起 | |
| SILCOLEASE EMULSION CATA 909 | Elkem Silicones | SILCOLEASE EMULSION CATA 909 a non-ionic aqueous emulsion of polymethylsiloxane grafted with reactive chemicals with the addition of a Platinum salt. It is used as an emulsion catalyst for the range of SILCOLEASE EMULSIONS to obtain a non-migratory releas...展開 SILCOLEASE EMULSION CATA 909 a non-ionic aqueous emulsion of polymethylsiloxane grafted with reactive chemicals with the addition of a Platinum salt. It is used as an emulsion catalyst for the range of SILCOLEASE EMULSIONS to obtain a non-migratory release coating for flexible substrates such as papers and films. 收起 | |
| SILCOLEASE EMULSION CATA 911 | Elkem Silicones | SILCOLEASE EMULSION CATA 911 is an emulsion of reactive silicone polymers combined with an organometallic catalyst. It is an emulsion catalyst to be used in conjunction with a silicone emulsion intended for release coating of papers and various substrates...展開 SILCOLEASE EMULSION CATA 911 is an emulsion of reactive silicone polymers combined with an organometallic catalyst. It is an emulsion catalyst to be used in conjunction with a silicone emulsion intended for release coating of papers and various substrates, for example SILCOLEASE EMULSION 915. It only catalyses polyaddition type reactions. 收起 | |
| SILCOLEASE EMULSION XL 966 | Elkem Silicones | SILCOLEASE EMULSION CROSSLINKER 966 is a silicone emulsion that can be used as a CROSSLINKER for polyaddition and polycondensation emulsions in the SILCOLEASE range. | |
| SILCOLEASE EMULSION XL 968 | Elkem Silicones | SILCOLEASE EMULSION XL 968 is a silicone emulsion that can be used as a CROSSLINKER for polyaddition and polycondensation emulsions in the SILCOLEASE range. | |
| SILCOLEASE EMULSION XL 969 | Elkem Silicones | SILCOLEASE EMULSION XL 969 is a silicone emulsion that can be used as a CROSSLINKER for polyaddition and polycondensation emulsions in the SILCOLEASE range. | |
| SILCOLEASE HA 1 | Elkem Silicones | SILCOLEASE HA-1 is a water-based additive. It is used with emulsion. SILCOLEASE polyaddition or polycondensation release systems to improve hold-out of the silicone. | |
| SILCOLEASE PC-105NXL | Elkem Silicones | SILCOLEASE PC-105NXL is a thermally curable silicone emulsion which provides an easy release surface for adhesives and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. SILCOLEASE PC-105NXL is an e...展開 SILCOLEASE PC-105NXL is a thermally curable silicone emulsion which provides an easy release surface for adhesives and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. SILCOLEASE PC-105NXL is an emulsion of a low vinyl content silicone fluid but without the methyl hydrogen siloxane crosslinker pre-added. As such, SILCOLEASE PC-105NXL offers the flexibility to the formulator of being able to modify the type or the amount of crosslinker to achieve special performance characteristics. A platinum catalyst emulsion is also required. Release modifier emulsions are available which, when blended with SILCOLEASE PC-105NXL in incrementally higher levels, will give correspondingly tighter release force performance. A platinum catalyst emulsion is also required. 收起 | |
| SILCOLEASE PC-107 | Elkem Silicones | SILCOLEASE PC-107 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are a...展開 SILCOLEASE PC-107 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are available which, when blended with SILCOLEASEPC-107 in incrementally higher levels, will give correspondingly tighter release force performance. SILCOLEASE PC-107 NXL is identical in composition to SILCOLEASEPC-107 but without methyl hydrogen crosslinker. As such, SILCOLEASEPC-107 NXL offers the flexibility to the formulator to modify the type and / or the amount of crosslinker to achieve specific performance characteristics. A platinum catalyst emulsion is required for each. 收起 | |
| SILCOLEASE PC-107 NXL | Elkem Silicones | SILCOLEASE PC-107 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are a...展開 SILCOLEASE PC-107 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are available which, when blended with SILCOLEASEPC-107 in incrementally higher levels, will give correspondingly tighter release force performance. SILCOLEASE PC-107 NXL is identical in composition to SILCOLEASEPC-107 but without methyl hydrogen crosslinker. As such, SILCOLEASEPC-107 NXL offers the flexibility to the formulator to modify the type and / or the amount of crosslinker to achieve specific performance characteristics. A platinum catalyst emulsion is required for each. 收起 | |
| SILCOLEASE PC-188 | Elkem Silicones | SILCOLEASE PC-188 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are a...展開 SILCOLEASE PC-188 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are available which, when blended with Silcolease ® PC-188 in incrementally higher levels, will give correspondingly tighter release force performance. Silcolease ® PC-188NXL is identical in composition to Silcolease ® PC-188 but without methyl hydrogen crosslinker. As such, Silcolease ® PC-188NXL offers the flexibility to the formulator to modify the type and / or the amount of crosslinker to achieve specific performance characteristics. A platinum catalyst emulsion is required for each. 收起 | |
| SILCOLEASE PC-188NXL | Elkem Silicones | SILCOLEASE PC-188 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are a...展開 SILCOLEASE PC-188 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are available which, when blended with Silcolease ®PC-188 in incrementally higher levels, will give correspondingly tighter release force performance. Silcolease ® PC-188NXL is identical in composition to Silcolease ®PC-188 but without methyl hydrogen crosslinker. As such, Silcolease ®PC-188NXL offers the flexibility to the formulator to modify the type and / or the amount of crosslinker to achieve specific performance characteristics. A platinum catalyst emulsion is required for each. 收起 | |
| SILCOLEASE PC-191 | Elkem Silicones | SILCOLEASE PC-191 is a release modifier designed to give incrementally higher levels of release when added to the easy release formulations. SILCOLEASE PC- 191 may be used at 0% through 100% of the polymer component with release values increasing proporti...展開 SILCOLEASE PC-191 is a release modifier designed to give incrementally higher levels of release when added to the easy release formulations. SILCOLEASE PC- 191 may be used at 0% through 100% of the polymer component with release values increasing proportionally as the level of SILCOLEASE PC-191 is increased in the formulation. Unlike traditional tight release additives which are based on vinyl functional siloxane resins, SILCOLEASE PC-191 is based on hydride functionality. As a result, SILCOLEASE PC-191 may offer greater efficiency in affecting release response than the vinyl functional counterparts. 收起 | |
| SILCOLEASE PC-195NXL | Elkem Silicones | SILCOLEASE PC-195NXL is a polyaddition release modifier designed to give incrementally higher levels of release when added to easy release formulations. SILCOLEASE PC-195NXL may be used at 0% through 100% of the emulsion component with release values incr...展開 SILCOLEASE PC-195NXL is a polyaddition release modifier designed to give incrementally higher levels of release when added to easy release formulations. SILCOLEASE PC-195NXL may be used at 0% through 100% of the emulsion component with release values increasing proportionally as the level of SILCOLEASE PC-195NXL is increased. Additionally, when SILCOLEASE PC-195NXL is used at or near 100% of the polymer blend, very high release levels are achievable with both rubber based and acrylic adhesives. 收起 | |
| SILCOLEASE PC-197 | Elkem Silicones | SILCOLEASE PC-197 is a release modifier designed to provide incrementally higher levels of release when added to easy release emulsion formulations. SILCOLEASEPC-197 may be used at 0% through 100% of the polymer component with release values increasing ...展開 SILCOLEASE PC-197 is a release modifier designed to provide incrementally higher levels of release when added to easy release emulsion formulations. SILCOLEASEPC-197 may be used at 0% through 100% of the polymer component with release values increasing proportionally as the amount of SILCOLEASEPC-197 is increased in the formulation. SILCOLEASE PC-197 is based on a vinyl functional siloxane resin. 收起 | |
| SILCOLEASE PC-31 | Elkem Silicones | SILCOLEASE PC-31 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copolym...展開 SILCOLEASE PC-31 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copolymer, while SILCOLEASE PC-868 is based on a methyl hydrogen polysiloxane homopolymer. SILCOLEASE PC-50 is a proprietary blend of two methyl hydrogen crosslinkers and is especially suited to work with troublesome substrates to provide superb anchorage of the cured silicone coating. The homopolymer and copolymer crosslinkers provide the flexibility of creating a range of crosslink matrices from a dense, tightly knit matrix to one that is comparatively open. With troublesome adhesives or substrates, release and anchorage improvements may be realized by an interchange of crosslinkers. 收起 | |
| SILCOLEASE PC-868 | Elkem Silicones | SILCOLEASE PC-868 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copoly...展開 SILCOLEASE PC-868 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copolymer, while SILCOLEASE PC-868 is based on a methyl hydrogen polysiloxane homopolymer. SILCOLEASE PC-50 is a proprietary blend of two methyl hydrogen crosslinkers and is especially suited to work with troublesome substrates to provide superb anchorage of the cured silicone coating. The homopolymer and copolymer crosslinkers provide the flexibility of creating a range of crosslink matrices from a dense, tightly knit matrix to one that is comparatively open. With troublesome adhesives or substrates, release and anchorage improvements may be realized by an interchange of crosslinkers. 收起 | |
| SILCOLEASE PC-95 | Elkem Silicones | SILCOLEASE PC-95 is an emulsion of a proprietary platinum complex with low volatile components and specially formulated to reduce “dust” formation in curing ovens. SILCOLEASE PC-95 is the catalyst component of emulsion silicone release coatings and promot...展開 SILCOLEASE PC-95 is an emulsion of a proprietary platinum complex with low volatile components and specially formulated to reduce “dust” formation in curing ovens. SILCOLEASE PC-95 is the catalyst component of emulsion silicone release coatings and promotes polymerization through a polyaddition reaction. When properly formulated with a release polymer emulsion, SILCOLEASE PC-95 provides a thermally curable release coating for paper substrates. 收起 | |
| SILCOLEASE XL PC-50 | Elkem Silicones | SILCOLEASE PC-50 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copolym...展開 SILCOLEASE PC-50 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copolymer, while SILCOLEASE PC-868 is based on a methyl hydrogen polysiloxane homopolymer. SILCOLEASE PC-50 is a proprietary blend of two methyl hydrogen crosslinkers and is especially suited to work with troublesome substrates to provide superb anchorage of the cured silicone coating. The homopolymer and copolymer crosslinkers provide the flexibility of creating a range of crosslink matrices from a dense, tightly knit matrix to one that is comparatively open. With troublesome adhesives or substrates, release and anchorage improvements may be realized by an interchange of crosslinkers. 收起 | |
| Stigmasterol | Xi'an Healthful Biotechnology Co. Ltd. | Stigmasterol is a finely ground powder derived from soybean oil distillates. This product is intended for use as an antioxidant in dietary supplements. |
