| ACCULIN® 1000 (2071A) | The International Group, Inc. (IGI Wax) | ACCULIN® 1000 is a hard, high melting point polyethylene. | |
| ACCULIN® 1500 (2057A) | The International Group, Inc. (IGI Wax) | ACCULIN® 1500 is an extremely pure, inert, narrow melt point product that exhibits very specific expansion behavior. | |
| ACCULIN® 1500 (2073A) | The International Group, Inc. (IGI Wax) | ACCULIN® 1500 is a hard, low melting point polyethylene. | |
| ACCULIN® 2000 (2074A) | The International Group, Inc. (IGI Wax) | ACCULIN® 2000 is a hard, high melting point polyethylene. | |
| ACCULIN® 500 (2056A) | The International Group, Inc. (IGI Wax) | ACCULIN® 500 is a hard, low melting point polyethylene. | |
| ACCULIN® 600 (2059A) | The International Group, Inc. (IGI Wax) | ACCULIN® 600 is a hard, low melting point polyethylene. | |
| ACCULIN® 655 (2061A) | The International Group, Inc. (IGI Wax) | ACCULIN® 655 is a hard, low melting point polyethylene. | |
| ACCULIN® 725 (2063A) | The International Group, Inc. (IGI Wax) | ACCULIN® 725 is a hard, low melting point polyethylene. | |
| EBECRYL® 11 | Allnex | EBECRYL® 11 is a polyethylene glycol diacrylate derivative. Ebecryl®11, being 100% water soluble, is designed for use in applications needing this type of solubility. | Request Sample |
| FIPOLDER™ FHP05040 | Polygroup Inc. | FIPOLDER™ FHP05040 is a high density polyethylene (HDPE) polymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. FIPOLDER™ materials are pure polyethylene with broad regulatory compliance and con...展開 FIPOLDER™ FHP05040 is a high density polyethylene (HDPE) polymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. FIPOLDER™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. 收起 | |
| FIPOLDER™ FHP05080 | Polygroup Inc. | FIPOLDER™ FHP05080 is a high density polyethylene (HDPE) polymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. FIPOLDER™ materials are pure polyethylene with broad regulatory compliance and con...展開 FIPOLDER™ FHP05080 is a high density polyethylene (HDPE) polymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. FIPOLDER™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. 收起 | |
| FIPOLDER™ HM300 | Polygroup Inc. | FIPOLDER™ HM300 is a high density polyethylene (HDPE) Polymer in a medium-fine particle powder form. Its minerals are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some applicatio...展開 FIPOLDER™ HM300 is a high density polyethylene (HDPE) Polymer in a medium-fine particle powder form. Its minerals are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. FIPOLDER™ powders are well suited for a variety of applications including for use in structural paints and coatings, textiles, soap and cleaners, Etc.. 收起 | |
| Flexonic™ EN41 E | Lawter | Flexonic™ EN41 E is a polyethylene emulsion that displays scratch, rub, slip and block resistant properties. It is used as an additive in water-based coatings, inks and overprint varnishes and has good compatibility with styrene acrylics and acrylics. The...展開 Flexonic™ EN41 E is a polyethylene emulsion that displays scratch, rub, slip and block resistant properties. It is used as an additive in water-based coatings, inks and overprint varnishes and has good compatibility with styrene acrylics and acrylics. The product is used in aqueous inks and coatings. 收起 | |
| Flexonic™ W378 E | Lawter | Flexonic™ W378 E is a polyethylene emulsion that is APE-free and exhibits scratch, rub, slip and block resistant properties. It has minimal effect on gloss, while showing good compatibility with styrene acrylics and acrylics. The product is used in aqueou...展開 Flexonic™ W378 E is a polyethylene emulsion that is APE-free and exhibits scratch, rub, slip and block resistant properties. It has minimal effect on gloss, while showing good compatibility with styrene acrylics and acrylics. The product is used in aqueous inks and coatings. 收起 | |
| Hicoat 37 | Tridev Resins (India) Pvt. Ltd. | Hicoat 37 is a nonionic, polyethylene wax emulsion. It can be added to pigmented or clear coatings to provide rub resistance and improve slip, without detracting from gloss or clarity. The high softening point of the wax contributes to heat and block resi...展開 Hicoat 37 is a nonionic, polyethylene wax emulsion. It can be added to pigmented or clear coatings to provide rub resistance and improve slip, without detracting from gloss or clarity. The high softening point of the wax contributes to heat and block resistance. It is highly water dispersible and exhibits good compatibility and stability in aqueous vehicles. It can be used in water-based inks or clear coatings. 收起 | |
| HP series™ HM200 | Polygroup Inc. | HP series™ HM200 is a hot-melt adhesive HDPE powder for interlining purposes. It has a high melting point which contributes to its heat resistance. HP series™ HM080 is designed by a special method of TWO H Chem's own technology to meet the requirements fo...展開 HP series™ HM200 is a hot-melt adhesive HDPE powder for interlining purposes. It has a high melting point which contributes to its heat resistance. HP series™ HM080 is designed by a special method of TWO H Chem's own technology to meet the requirements for coating modern textile interlinings and is well suited for paste coatings. 收起 | |
| SP Series™ SHP1500-1 | Polygroup Inc. | SP Series™ SHP1500-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory complian...展開 SP Series™ SHP1500-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. These powders are well suited for use in structural paints and coating applications that require anti-slip, structural, or satin and matt finish effects. 收起 | |
| SP Series™ SHP4080-1 | Polygroup Inc. | SP Series™ SHP4080-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory complian...展開 SP Series™ SHP4080-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. These powders are well suited for use in structural paints and coating applications that require anti-slip, structural, or satin and matt finish effects. 收起 | |
| SP Series™ SHP8015-1 | Polygroup Inc. | SP Series™ SHP8015-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory complian...展開 SP Series™ SHP8015-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. These powders are well suited for use in structural paints and coating applications that require anti-slip, structural, or satin and matt finish effects. 收起 | |
| Ultrafine™ 1000 A | Lawter | Ultrafine™ 1000 A is a micronized polyethylene wax powder recommended when maximum mar, block and rub resistance are required along with elevated temperatures, slip and re-coatability. It offers a narrow particle size distribution to ease dispersion and c...展開 Ultrafine™ 1000 A is a micronized polyethylene wax powder recommended when maximum mar, block and rub resistance are required along with elevated temperatures, slip and re-coatability. It offers a narrow particle size distribution to ease dispersion and create uniformity during processing. Ultrafine™ 1000 A is used in solvent and water-based flexographic and gravure inks, in sheet-fed, UV and metal deco applications and in wood, can, coil and powder coatings. 收起 | |
| Ultrafine™ 1000PE | Lawter | Ultrafine™ 1000PE is a micronized polyethylene wax that has good rub, gloss and slip properties as well as aqueous and UV coatings that make it ideal for use in sheet-fed, heatset and liquid inks. | |
| Ultrapoly™ 210 A | Lawter | Ultrapoly™ 210 A is a sheet-fed polyethylene compound that is non-volatile and is a hard-drying and fast setting vehicle. It is recommended in situations that call for mar resistance, slip and abrasion. Ultrapoly™ 210 A protects the film during the earli...展開 Ultrapoly™ 210 A is a sheet-fed polyethylene compound that is non-volatile and is a hard-drying and fast setting vehicle. It is recommended in situations that call for mar resistance, slip and abrasion. Ultrapoly™ 210 A protects the film during the earliest phases of the printing process while developing toughness over time. It is ideally used in sheet-fed offset inks, in OPV, metal decorating and in UV inks. 收起 | |
| Ultrapoly™ 452 E | Lawter | Ultrapoly™ 452 E is a wax compound that is non-volatile and is based on polyethylene wax and vegetable oil. It displays good scratch and rub resistance as well as good slip and gloss. Ultrapoly™ 452 E also has low peppering and a low particle size adds to...展開 Ultrapoly™ 452 E is a wax compound that is non-volatile and is based on polyethylene wax and vegetable oil. It displays good scratch and rub resistance as well as good slip and gloss. Ultrapoly™ 452 E also has low peppering and a low particle size adds to good wash out test values and narrow particle size distribution benefits. The wax compound is used in quickset, sheet-fed and heatset inks. 收起 | |
| Ultrapoly™ 990 E | Lawter | Ultrapoly™ 990 E is a wax compound from polyethylene wax and vegetable oil. It has good rub, abrasion and scratch resistance with good slip and anti-blocking benefits. The product also shows good gloss, is non-volatile and is used as a wax compound in qui...展開 Ultrapoly™ 990 E is a wax compound from polyethylene wax and vegetable oil. It has good rub, abrasion and scratch resistance with good slip and anti-blocking benefits. The product also shows good gloss, is non-volatile and is used as a wax compound in quickset, sheet-fed and heatset inks. 收起 |
