UL Prospector

成功!

成功保存搜索結果
2-Ethylhexanoic Acid Penpet Petrochemical Trading GmbH 2-Ethylhexanoic Acid, in the form of a dense, clear, colourless to yellow liquid with a faint odour, is a catalyst that can be used in the dye and paint, and printing ink industry. This product is insoluble in water but is soluble in almost all conventio...展開 2-Ethylhexanoic Acid, in the form of a dense, clear, colourless to yellow liquid with a faint odour, is a catalyst that can be used in the dye and paint, and printing ink industry. This product is insoluble in water but is soluble in almost all conventional solvents. Most of its siccatives are metal salts that can be used as drying agents. 收起
Barium Sulphate BS-419 Briture Co., Ltd. Barium Sulphate BS-419 is a chemically synthesized barium sulfate product refined with barium salt and sodium sulfate. This product shields x-rays and y-rays, and can improve the gloss and surface hardness of products. Barium Sulphate BS-419 is used in po...展開 Barium Sulphate BS-419 is a chemically synthesized barium sulfate product refined with barium salt and sodium sulfate. This product shields x-rays and y-rays, and can improve the gloss and surface hardness of products. Barium Sulphate BS-419 is used in powder coatings and printing ink. 收起
Bitoner® C9 Resin BP-120 Qingdao Bater Chemical Co., Ltd. Bitoner® C9 Resin BP-120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with resins and polymers, good thermal resistance, low odor, lo...展開 Bitoner® C9 Resin BP-120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with resins and polymers, good thermal resistance, low odor, low VOC, and water resistance. BP-120 has recommended applications in sealants, solvent based adhesives, rubber, coatings, printing ink, and hot melt adhesives. 收起
Bitoner® C9 Resin BP-140 Qingdao Bater Chemical Co., Ltd. Bitoner® C9 Resin BP-140, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with resins and polymers, good thermal resistance, low odor, lo...展開 Bitoner® C9 Resin BP-140, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with resins and polymers, good thermal resistance, low odor, low VOC, and water resistance. BP-140 has recommended applications in sealants, solvent based adhesives, rubber, coatings, PSA, asphalt modification, printing ink, and hot melt adhesives. 收起
Bitoner® C9 Resin BP-150 Qingdao Bater Chemical Co., Ltd. Bitoner® C9 Resin BP-150, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin. It has good compatibility with rosin modified phenolic resins, water resistance, and recommended applications in sealants, solvent...展開 Bitoner® C9 Resin BP-150, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin. It has good compatibility with rosin modified phenolic resins, water resistance, and recommended applications in sealants, solvent based adhesives, rubber, coatings, PSA, printing ink, and hot melt adhesives. 收起
Bitoner® H-100 Qingdao Bater Chemical Co., Ltd. Bitoner® H-100, in the form of a white granular, is thermoplastic hydrogenated aromatic resin obtained from petroleum-derived monomers. It has good thermal resistance, low odor, water resistance, and good compatibility with SBS, SIS, and EVA. H-100 has re...展開 Bitoner® H-100, in the form of a white granular, is thermoplastic hydrogenated aromatic resin obtained from petroleum-derived monomers. It has good thermal resistance, low odor, water resistance, and good compatibility with SBS, SIS, and EVA. H-100 has recommended applications in solvent adhesives, plastic modification, hot melt adhesives, and wax modification. 收起
Bitoner® Resin BA-120 Qingdao Bater Chemical Co., Ltd. Bitoner® Resin BA-120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with other polymers and resins, good thermal resistance, water res...展開 Bitoner® Resin BA-120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with other polymers and resins, good thermal resistance, water resistance, low odor, and very low VOC. BA-120 has recommended applications in sealants, rubber, coatings, printing ink, hot melt adhesive, and solvent based adhesives. 收起
Bitoner® Resin LH-3100 Qingdao Bater Chemical Co., Ltd. Bitoner® Resin LH-3100, in the form of a water white granular, is hydrogenated C9 hydrocarbon resin. It has good heat stability, good chemical stability, odorless, low VOC, and good compatibility with various polymers. LH-3100 has recommended applications...展開 Bitoner® Resin LH-3100, in the form of a water white granular, is hydrogenated C9 hydrocarbon resin. It has good heat stability, good chemical stability, odorless, low VOC, and good compatibility with various polymers. LH-3100 has recommended applications in sealants, coatings, ink, pressure sensitive adhesives, and hot melt adhesives. 收起
Chlorinated Polypropylene Granular Form Briture Co., Ltd. Chlorinated Polypropylene Granular Form is a white or pale yellow granular chlorinated polypropylene adhesive agent that is completely soluble in toluene and xylene. This product has good fluidity and good weather, thermal aging, oil, ozone, chemical and ...展開 Chlorinated Polypropylene Granular Form is a white or pale yellow granular chlorinated polypropylene adhesive agent that is completely soluble in toluene and xylene. This product has good fluidity and good weather, thermal aging, oil, ozone, chemical and fire resistance. Chlorinated Polypropylene Granular Form is used in composite printing inks, coating film, and plastics paint. 收起
Epoxidized Soybean Oil (ESBO) Penpet Petrochemical Trading GmbH Epoxidized Soybean Oil (ESBO), in the form of a light yellow, thick, oily liquid, is a plasticizer than can be used in oil paints, adhesives, and printing inks. This product is derived from soybean oil through the reaction of unsaturated compounds with p...展開 Epoxidized Soybean Oil (ESBO), in the form of a light yellow, thick, oily liquid, is a plasticizer than can be used in oil paints, adhesives, and printing inks. This product is derived from soybean oil through the reaction of unsaturated compounds with peracids. Its boiling point is 150°C with an ignition point at 310°C. 收起
Isophorone Penpet Petrochemical Trading GmbH Isophorone, in the form of a clear fluid having a peppermint odour, is an industrial solvent in the coatings, inks, and adhesive industries. This product can be used in synthesis for the production of isophorone diamine, isophorone diisocyanate and 3,5-d...展開 Isophorone, in the form of a clear fluid having a peppermint odour, is an industrial solvent in the coatings, inks, and adhesive industries. This product can be used in synthesis for the production of isophorone diamine, isophorone diisocyanate and 3,5-dimethylphenol. 收起
Isopropanol Penpet Petrochemical Trading GmbH Isopropanol, in the form of a colourless, clear liquid, is a highly concentrated alcohol that can be used as a solvent for adhesives, paints, and inks. This product is often used as a substitute for ethanol. It is often a constituent of disinfectant sol...展開 Isopropanol, in the form of a colourless, clear liquid, is a highly concentrated alcohol that can be used as a solvent for adhesives, paints, and inks. This product is often used as a substitute for ethanol. It is often a constituent of disinfectant solutions because it can quickly and easily clean surfaces, and evaporates without leaving a residue. 收起
Polyamide Resin Alcohol Soluble PA-010 Briture Co., Ltd. Polyamide Resin Alcohol Soluble PA-010 is a transparent yellowish granular polyamide resin. This product is water and gel resistant with good gloss, fluidity and pigment wetting properties. It also has good compatibility with nitrocotton and varnish stabi...展開 Polyamide Resin Alcohol Soluble PA-010 is a transparent yellowish granular polyamide resin. This product is water and gel resistant with good gloss, fluidity and pigment wetting properties. It also has good compatibility with nitrocotton and varnish stability. Polyamide Resin Alcohol Soluble PA-010 is used in flexographic plastic ink, printing ink, and heat seal coating. 收起
Polyamide Resin Co-Solvent Soluble Briture Co., Ltd. Polyamide Resin Co-Solvent Soluble is a benzene soluble polyamide resin. This product has good stability, solvent liberation, bending flexure, glossiness, adhesive power, solvent release and gel resistance. Polyamide Resin Co-Solvent Soluble is used in va...展開 Polyamide Resin Co-Solvent Soluble is a benzene soluble polyamide resin. This product has good stability, solvent liberation, bending flexure, glossiness, adhesive power, solvent release and gel resistance. Polyamide Resin Co-Solvent Soluble is used in various printing inks. 收起
R-730 TiO2 Boom Industry (SH) Co., Ltd. R-730 TiO2 is a stable universal rutile titanium dioxide used for its versatility, durability, hiding power and gloss. This product can be applied to senior industrial coating that requires high weather resistance, paints and inks.
R-750 TiO2 Boom Industry (SH) Co., Ltd. R-750 TiO2 is a general-purpose product created through a sulfuric acid production process. This product has good dispersion, hiding power, weather resistance and other characteristics. It is commonly used in interior and exterior paints and inks.
R-760 TiO2 Boom Industry (SH) Co., Ltd. R-760 TiO2 is a general-purpose rutile titanium dioxide than can be easily scattered, moistened or mixed with other resins. This product provides weather resistance, hiding power, anti-chalking property and yellowing resistance in industrial paints, print...展開 R-760 TiO2 is a general-purpose rutile titanium dioxide than can be easily scattered, moistened or mixed with other resins. This product provides weather resistance, hiding power, anti-chalking property and yellowing resistance in industrial paints, printing inks and different kinds of coatings. 收起
R-98 TiO2 Boom Industry (SH) Co., Ltd. R-98 TiO2 is a chlorination rutile pigment derived from chlorination and oxidation of silicon. This product has good weather resistance, excellent stability and high dispersibility. It is commonly used in coatings and printing inks.
Texicryl® 13-220 Scott Bader Texicryl® 13-220 is a self cross-linking acrylic copolymer emulsion that has a soft, flexible film after curing, providing a good resistance to washing on printed textiles. It offers good binding properties for pigments, making it ideal for pigment printi...展開 Texicryl® 13-220 is a self cross-linking acrylic copolymer emulsion that has a soft, flexible film after curing, providing a good resistance to washing on printed textiles. It offers good binding properties for pigments, making it ideal for pigment printing on flat screen and rotary systems. Texicryl® 13-220 also offers good adhesion on most substrates, with flexibility also ideal at low temperatures. Texicryl® 13-220 is suitable for the making of non-woven and flocking adhesives whether by pulverization, foaming or full bath methods. 收起
Texicryl® 13-224 Scott Bader Texicryl® 13-224 is a self cross-linking styrene acrylic copolymer emulsion that has good wet scrub resistance and a soft handle. It provides good binding properties for the pigment printing of textiles and can be used on flat frameworks or rotary systems...展開 Texicryl® 13-224 is a self cross-linking styrene acrylic copolymer emulsion that has good wet scrub resistance and a soft handle. It provides good binding properties for the pigment printing of textiles and can be used on flat frameworks or rotary systems. 收起
Texicryl® 13-503 Scott Bader Texicryl® 13-503 is a styrene acrylic copolymer emulsion that has a high gloss and good water and wet rub resistance when formulated into an ink system. It is ideal for use in the formulation of printing inks for substrates like polypropylene, polyethylen...展開 Texicryl® 13-503 is a styrene acrylic copolymer emulsion that has a high gloss and good water and wet rub resistance when formulated into an ink system. It is ideal for use in the formulation of printing inks for substrates like polypropylene, polyethylene and various foils. Application of the inks are made on non-absorbent, low surface energy substrates. 收起
Texicryl® 13-525 Scott Bader Texicryl® 13-525 is a styrene acrylic copolymer emulsion that has good flow/leveling properties together with an ability to obtain gloss levels that are close to the best water-based overprint varnishes, making it an ideal product for high-quality blister...展開 Texicryl® 13-525 is a styrene acrylic copolymer emulsion that has good flow/leveling properties together with an ability to obtain gloss levels that are close to the best water-based overprint varnishes, making it an ideal product for high-quality blister packaging with suitable seal integrity. Texicryl® 13-525 displays good compatibility with other components and will not block easily in a stack. It is free of APEO surfactants and is made to be the main binder in the formulation of blister seal adhesives with good graphic qualities. It is suited to other heat seal applications as well as being ideal as a modifying resin to cold seal adhesives, allowing the adhesive a better key to the substrate. 收起
Texicryl® 13-737 Scott Bader Texicryl® 13-737 is a carboxylated acrylate copolymer for use in aqueous flexographic printing inks and low paper curl applications. It has good pigment wetting, press wash-up and print transfer properties, along with good stability and low foaming in fle...展開 Texicryl® 13-737 is a carboxylated acrylate copolymer for use in aqueous flexographic printing inks and low paper curl applications. It has good pigment wetting, press wash-up and print transfer properties, along with good stability and low foaming in flexographic systems. 收起
Texicryl® 13-809 Scott Bader Texicryl® 13-809 is a styrene acrylic copolymer emulsion that is designed for water-based overprint varnishes, high gloss and heat-resistant inks. It has uses in flexograhpic and gravure inks and can also be used as a deblocking modifier.
Texicryl® 13-811 Scott Bader Texicryl® 13-811 is an acrylic copolymer emulsion that has good rub resistance and transfer properties and is ideal for use in water-based printing inks and in the making of high gloss and emulsion paints. In the form of its amine salt, the emulsion is u...展開 Texicryl® 13-811 is an acrylic copolymer emulsion that has good rub resistance and transfer properties and is ideal for use in water-based printing inks and in the making of high gloss and emulsion paints. In the form of its amine salt, the emulsion is used a sole or part-binder in flexographic printing inks that are water-based. Texicryl® 13-811 allows formulating latitude because solubilizing amines and wet-edge additives can be chosen by the formulator. 收起
Texicryl® 13-812 Scott Bader Texicryl® 13-812 is a carboxylated acrylic copolymer emulsion that has good rub resistance and transfer properties and is designed for water-based printing ink formulations. It has applications in flexographic inks for corrugated board and is also suitabl...展開 Texicryl® 13-812 is a carboxylated acrylic copolymer emulsion that has good rub resistance and transfer properties and is designed for water-based printing ink formulations. It has applications in flexographic inks for corrugated board and is also suitable as a pigment grinding medium and let down vehicle. 收起
Texicryl® 13-813 Scott Bader Texicryl® 13-813 is a styrene acrylic copolymer emulsion that is formulated to provide good gloss overprint and holdout over printed areas. It has been especially created to exhibit low-odor characteristics, offering additional compounding benefits. Texic...展開 Texicryl® 13-813 is a styrene acrylic copolymer emulsion that is formulated to provide good gloss overprint and holdout over printed areas. It has been especially created to exhibit low-odor characteristics, offering additional compounding benefits. Texicryl® 13-813 is designed for use in offset overprinting varnishes and certain graphic arts applications. 收起
Texicryl® 13-814 Scott Bader Texicryl® 13-814 is a styrene acrylic copolymer emulsion that has good flexibility and provides ideal adhesion to "difficult" non-absorbent substrates that are difficult to wet out. It also displays good "wet crinkle resistance" on foils and films. Texicr...展開 Texicryl® 13-814 is a styrene acrylic copolymer emulsion that has good flexibility and provides ideal adhesion to "difficult" non-absorbent substrates that are difficult to wet out. It also displays good "wet crinkle resistance" on foils and films. Texicryl® 13-814 displays low foaming, fast drying and good gloss in inks and OPV's. It is suitable as a main binder in flexo and gravure inks with good clarity ensuring its use in offset overprint varnishes as well. 收起
Texicryl® 13-818 Scott Bader Texicryl® 13-818 is a styrene acrylic copolymer emulsion that has fast drying and low foaming characteristics with good flexibility and MVTR behavior. It is ideal for use as the main binder in barrier coating applications where it shows low MVTR and Cobb ...展開 Texicryl® 13-818 is a styrene acrylic copolymer emulsion that has fast drying and low foaming characteristics with good flexibility and MVTR behavior. It is ideal for use as the main binder in barrier coating applications where it shows low MVTR and Cobb values. Texicryl® 13-818 is able to form strong films at normal room temperature, but varnishes and inks "key" faster to non-absorbent substrates if gentle heat is provided through force drying. 收起
Texicryl® 13-819 Scott Bader Texicryl® 13-819 is a styrene acrylic copolymer-based emulsion vehicle that is compatible with hard polymers usually used in the formulating of overprint varnishes and can be incorporated into OPV's to partially replace the hard polymer and boost gloss le...展開 Texicryl® 13-819 is a styrene acrylic copolymer-based emulsion vehicle that is compatible with hard polymers usually used in the formulating of overprint varnishes and can be incorporated into OPV's to partially replace the hard polymer and boost gloss levels. It is also compatible with a variety of heat-resistant waxes, defoamers and acrylic polymers usually used in heat-resistant overprint varnishes. Other benefits of Texicryl® 13-819 include a low odor, good resolubility and a higher gloss than conventional heat-resistant polymers. 收起
Texicryl® 13-824 Scott Bader Texicryl® 13-824 is a styrene acrylic copolymer emulsion that can be coalesced to provide a solvent and plasticizer-resistant film. It has been developed for the formulation of plasticizer-resistant inks.
Texicryl® S-02 Scott Bader Texicryl® S-02 is a low molecular-weight, alkali-soluble resin that is supplied in solid form and designed to give off gloss and resolubility, while maintaining low foaming behavior and good printability to water-based coatings in the graphic arts industr...展開 Texicryl® S-02 is a low molecular-weight, alkali-soluble resin that is supplied in solid form and designed to give off gloss and resolubility, while maintaining low foaming behavior and good printability to water-based coatings in the graphic arts industry. 收起
Texicryl® S-09 Scott Bader Texicryl® S-09 is an alkali-soluble styrene acrylic resin that is supplied in solid form and is made to give off gloss and resolubility to water-based coatings in the graphic arts industry. It has been developed for water-based coatings and inks.
Texicryl® S-0933 Scott Bader Texicryl® S-0933 is a 33% solution of solid styrene-acrylic resin in water, with ammonia added to enable solubility. This product is designed for use in a variety of flexible packaging applications - including pigmented inks, clear coatings, and adhesives...展開 Texicryl® S-0933 is a 33% solution of solid styrene-acrylic resin in water, with ammonia added to enable solubility. This product is designed for use in a variety of flexible packaging applications - including pigmented inks, clear coatings, and adhesives. 收起
Texicryl® S-0933M Scott Bader Texicryl® S-0933M is a styrene acrylic copolymer emulsion that has a 33% solids resin solution, solubilized with Monoethanolamine, in water. It is a vehicle made for use in various flexible packaging applications including pigmented systems like inks, coa...展開 Texicryl® S-0933M is a styrene acrylic copolymer emulsion that has a 33% solids resin solution, solubilized with Monoethanolamine, in water. It is a vehicle made for use in various flexible packaging applications including pigmented systems like inks, coatings and adhesives. When formulated into ink systems, it is ideal for gravure and flexographic applications. Texicryl® S-0933M is designed to give off good gloss, while maintaining low foaming and aiding good printability. 收起
Texicryl® S-12 Scott Bader Texicryl® S-12 is an alkali-soluble styrene acrylic resin created for water-based inks and coatings. The resin is provided in solid form and is designed to give off gloss and resolubility, while maintaining low foaming characteristics and aiding good prin...展開 Texicryl® S-12 is an alkali-soluble styrene acrylic resin created for water-based inks and coatings. The resin is provided in solid form and is designed to give off gloss and resolubility, while maintaining low foaming characteristics and aiding good printability in water-based coatings within the graphic arts industry. 收起
Texipol® 63-237 Scott Bader Texipol® 63-237 is an anionic inverse emulsion thickener, developed especially for the pigment printing of textiles. It is provided as a low viscosity, easy-to-use inverse emulsion which can be pumped and metered. Texipol® 63-237 is an ideal thickener for...展開 Texipol® 63-237 is an anionic inverse emulsion thickener, developed especially for the pigment printing of textiles. It is provided as a low viscosity, easy-to-use inverse emulsion which can be pumped and metered. Texipol® 63-237 is an ideal thickener for pigment printing of polyester, cotton, blended fabrics and other materials. Among the benefits are sharper and better-defined prints, good fastness in dry and wet applications, color brightness and ease of use compared to powders and non-dispersed gels. 收起
Texipol® 67-5055 Scott Bader Texipol® 67-5055 is a multifunctional, high efficiency synthetic thickener specifically designed for use with Chromojet carpet printing machinery. It features superb colour bleed resistance and excellent storage stability. This product is ideal for use in...展開 Texipol® 67-5055 is a multifunctional, high efficiency synthetic thickener specifically designed for use with Chromojet carpet printing machinery. It features superb colour bleed resistance and excellent storage stability. This product is ideal for use in print paste formulations that yield well-defined prints with excellent colour yield, brightness, and handling characteristics. 收起
Texipol® 67-5060 Scott Bader Texipol® 67-5060 is a multifunctional synthetic thickener, created especially for disperse, reactive, and acid-dye printing applications. It yields high definition prints with good brightness, color yield, and handling characteristics. This product can be...展開 Texipol® 67-5060 is a multifunctional synthetic thickener, created especially for disperse, reactive, and acid-dye printing applications. It yields high definition prints with good brightness, color yield, and handling characteristics. This product can be used in flat bed and rotary printing processes. 收起
Thermoplastic Solid Acrylic Resin BA-66 Briture Co., Ltd. Thermoplastic Solid Acrylic Resin BA-66 is a white powder that can be dissolved in ester kind, ketone and kind solvent. This product has good luster, rigidity, pigment dispersion and chemical and weathering resistance. Thermoplastic Solid Acrylic Resin BA...展開 Thermoplastic Solid Acrylic Resin BA-66 is a white powder that can be dissolved in ester kind, ketone and kind solvent. This product has good luster, rigidity, pigment dispersion and chemical and weathering resistance. Thermoplastic Solid Acrylic Resin BA-66 is used in soft plastic paint, plastic printing ink, container paint, and industry paint. 收起
Titanium Dioxide Anatase BA-01 Briture Co., Ltd. Titanium Dioxide Anatase BA-01 is a white titanium dioxide powdered pigment. This product has tinting power and fineness and dispersibility properties. Titanium Dioxide Anatase BA-01 is used in paints.
Titanium Dioxide Rutile BR-889 Briture Co., Ltd. Titanium Dioxide Rutile BR-889 is a powdered titanium dioxide white pigment with high gloss. This product has high weather resistance and hiding powder, a stable hue, and is easy for damping and dispersion. Titanium Dioxide Rutile BR-889 is used in high-l...展開 Titanium Dioxide Rutile BR-889 is a powdered titanium dioxide white pigment with high gloss. This product has high weather resistance and hiding powder, a stable hue, and is easy for damping and dispersion. Titanium Dioxide Rutile BR-889 is used in high-level solvent coatings, high gloss paint, industrial paint, surface printing ink, iron printing ink, and powder coatings. 收起
Tri Isobutyl Phosphate 99%min Briture Co., Ltd. Tri Isobutyl Phosphate 99%min is a colorless transparent liquid. This product is used as a defoamer. Tri Isobutyl Phosphate 99%min is used in dyeing and printing ink.