UL Prospector

成功!

成功保存搜索結果
A2053 Titanium Yellow Dongguan Harvesting Pigments Manufacturing Co., Ltd. A2053 Titanium Yellow is a coating that is used in the coil coating, spaceflight, sign post, wall paint, printing ink, and car shell industries. This product has good weather-fastness and is resistant to high temperature. It has a melting point of >1.000°...展開 A2053 Titanium Yellow is a coating that is used in the coil coating, spaceflight, sign post, wall paint, printing ink, and car shell industries. This product has good weather-fastness and is resistant to high temperature. It has a melting point of >1.000°C and a density of 4-5g/cm3. 收起
A2053B Titanium Yellow Dongguan Harvesting Pigments Manufacturing Co., Ltd. A2053B Titanium Yellow has a melting point of >1.000°C and a density of 4-5g/cm3. It is a coating that is used in the coil coating, spaceflight, sign post, wall paint, printing ink, and car shell industries. This product has good weather-fastness and is r...展開 A2053B Titanium Yellow has a melting point of >1.000°C and a density of 4-5g/cm3. It is a coating that is used in the coil coating, spaceflight, sign post, wall paint, printing ink, and car shell industries. This product has good weather-fastness and is resistant to high temperature. 收起
A2110F Titanium Yellow Dongguan Harvesting Pigments Manufacturing Co., Ltd. A2110F Titanium Yellow is a product that has good weather-fastness and is resistant to high temperature. It is a coating that is used in the coil coating, spaceflight, sign post, wall paint, printing ink, and car shell industries. It has a density of 4-5g...展開 A2110F Titanium Yellow is a product that has good weather-fastness and is resistant to high temperature. It is a coating that is used in the coil coating, spaceflight, sign post, wall paint, printing ink, and car shell industries. It has a density of 4-5g/cm3 and a melting point of >1.000°C. 收起
A2110FG Titanium Yellow Dongguan Harvesting Pigments Manufacturing Co., Ltd. A2110FG Titanium Yellow is a coating that is used in the coil coating, spaceflight, wall paper, sign post, printing ink, and car shell industries. This product has good weather-fastness and is resistant to high temperature. It has a density of 4-5g/cm3 an...展開 A2110FG Titanium Yellow is a coating that is used in the coil coating, spaceflight, wall paper, sign post, printing ink, and car shell industries. This product has good weather-fastness and is resistant to high temperature. It has a density of 4-5g/cm3 and a melting point of >1.000°C. 收起
A2114 Titanium Yellow Dongguan Harvesting Pigments Manufacturing Co., Ltd. A2114 Titanium Yellow is a coating that is used in the coil coating, spaceflight, sign post, wall paint, printing ink, and car shell industries. This product has good weather-fastness and is resistant to high temperature. It has a density of 4-5g/cm3 and ...展開 A2114 Titanium Yellow is a coating that is used in the coil coating, spaceflight, sign post, wall paint, printing ink, and car shell industries. This product has good weather-fastness and is resistant to high temperature. It has a density of 4-5g/cm3 and a melting point of >1.000°C. 收起
Alcohol Soluble Maleic Resin WMR110 Resin Chemicals Co., Ltd. Alcohol Soluble Maleic Resin WMR110 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 100-120°C. This product is commonly used to provide high glo...展開 Alcohol Soluble Maleic Resin WMR110 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 100-120°C. This product is commonly used to provide high gloss and fast drying in alcohol soluble printing inks and water-based inks. 收起
Alcohol Soluble Maleic Resin WMR130 Resin Chemicals Co., Ltd. Alcohol Soluble Maleic Resin WMR130 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 120-140°C. This product is commonly used to provide high glo...展開 Alcohol Soluble Maleic Resin WMR130 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 120-140°C. This product is commonly used to provide high gloss and fast drying in alcohol soluble printing inks and water-based inks. 收起
Alcohol Soluble Maleic Resin WMR150 Resin Chemicals Co., Ltd. Alcohol Soluble Maleic Resin WMR150 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 140-150°C. This product is commonly used to provide high glo...展開 Alcohol Soluble Maleic Resin WMR150 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 140-150°C. This product is commonly used to provide high gloss and fast drying in alcohol soluble printing inks and water-based inks. 收起
Biocel SP/SG 85 Gohil Dyechem Corporation Biocel SP/SG 85 is a light brown, granular powder used in the preservation of wood. It is used as an industrial fungicide in paints and adhesives.
Gum Rosin K Resin Chemicals Co., Ltd. Gum Rosin K is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow-red, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity in ...展開 Gum Rosin K is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow-red, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起
Gum Rosin M Resin Chemicals Co., Ltd. Gum Rosin M is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow brown, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity i...展開 Gum Rosin M is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow brown, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起
Gum Rosin N Resin Chemicals Co., Ltd. Gum Rosin N is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a deep yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in...展開 Gum Rosin N is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a deep yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起
Gum Rosin WG Resin Chemicals Co., Ltd. Gum Rosin WG is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in the...展開 Gum Rosin WG is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起
Gum Rosin WW Resin Chemicals Co., Ltd. Gum Rosin WW is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a pale yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity i...展開 Gum Rosin WW is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a pale yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起
Gum Rosin X Resin Chemicals Co., Ltd. Gum Rosin X is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a slightly yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activit...展開 Gum Rosin X is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a slightly yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起
Hydrocarbon Resin C9 HPE100P Resin Chemicals Co., Ltd. Hydrocarbon Resin C9 HPE100P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low...展開 Hydrocarbon Resin C9 HPE100P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 90-110°C and is soluble in coal tars, esters, and turpentine oil. 收起
Hydrocarbon Resin C9 HPE100P-D Resin Chemicals Co., Ltd. Hydrocarbon Resin C9 HPE100P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, l...展開 Hydrocarbon Resin C9 HPE100P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 90-110°C and is soluble in coal tars, esters, and turpentine oil. 收起
Hydrocarbon Resin C9 HPE120P Resin Chemicals Co., Ltd. Hydrocarbon Resin C9 HPE120P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low...展開 Hydrocarbon Resin C9 HPE120P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 110-140°C and is soluble in coal tars, esters, and turpentine oil. 收起
Hydrocarbon Resin C9 HPE120P-D Resin Chemicals Co., Ltd. Hydrocarbon Resin C9 HPE120P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, l...展開 Hydrocarbon Resin C9 HPE120P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 110-140°C and is soluble in coal tars, esters, and turpentine oil. 收起
Hydrocarbon Resin C9 HPE120PL Resin Chemicals Co., Ltd. Hydrocarbon Resin C9 HPE120PL is a low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide good solubility, water resistance, insulation,...展開 Hydrocarbon Resin C9 HPE120PL is a low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide good solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 115-125°C and is soluble in coal tars, esters, and turpentine oil. 收起
Hydrogenated Rosin-A Resin Chemicals Co., Ltd. Hydrogenated Rosin-A is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C.
Hydrogenated Rosin-B Resin Chemicals Co., Ltd. Hydrogenated Rosin-B is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C.
Hydrogenated Rosin-C Resin Chemicals Co., Ltd. Hydrogenated Rosin-C is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C.
Hydrogenated Rosin-D Resin Chemicals Co., Ltd. Hydrogenated Rosin-D is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C.
Phthalic Anhydride Thirumalai Chemicals Ltd Phthalic Anhydride are white flakes and an aromatic di-carboxylic acid anhydride commonly used in production of alkyd resins for paints, inks and coatings, including lacquers, pigments and varnishes.
Polymerized Rosin Resin Chemicals Co., Ltd. Polymerized Rosin is a modified product consisting of gum rosin and abietic type acids. This product is used to provide a high softening point, oxidation resistance, and high viscosity in organic solvents. It is commonly used in inks, oil paints, adhesive...展開 Polymerized Rosin is a modified product consisting of gum rosin and abietic type acids. This product is used to provide a high softening point, oxidation resistance, and high viscosity in organic solvents. It is commonly used in inks, oil paints, adhesives, and emulsifying agents. It is a transparent solid in appearance with a softening point of 140-165°C. 收起
Proxel GXL Gohil Dyechem Corporation Proxel GXL is a broad spectrum biocide used for the preservation of industrial water-based products against spoilage from bacteria, yeasts and fungi. This brown liquid is effective in synthetic polymer emulsions, emulsion paints, water-based adhesives, pr...展開 Proxel GXL is a broad spectrum biocide used for the preservation of industrial water-based products against spoilage from bacteria, yeasts and fungi. This brown liquid is effective in synthetic polymer emulsions, emulsion paints, water-based adhesives, printing inks, paper coating compositions, and aqueous mineral and pigment slurries. 收起
Refined Gum Rosin Resin Chemicals Co., Ltd. Refined Gum Rosin is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a light colored, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical act...展開 Refined Gum Rosin is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a light colored, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起
Rosin Modified Maleic Resin MR-130 Resin Chemicals Co., Ltd. Rosin Modified Maleic Resin MR-130 is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 3-4. This product is u...展開 Rosin Modified Maleic Resin MR-130 is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 3-4. This product is used to provide light color production and retention in nitrocellulose lacquers and inks. 收起
Rosin Modified Maleic Resin MR-130D Resin Chemicals Co., Ltd. Rosin Modified Maleic Resin MR-130D is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 5-8. This product is ...展開 Rosin Modified Maleic Resin MR-130D is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 5-8. This product is used to provide light color production and retention in nitrocellulose lacquers and inks. 收起
Rosin Modified Phenolic Resin PI116 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI116 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展開 Rosin Modified Phenolic Resin PI116 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起
Rosin Modified Phenolic Resin PI118 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI118 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2000-2800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展開 Rosin Modified Phenolic Resin PI118 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2000-2800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起
Rosin Modified Phenolic Resin PI136 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI136 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1600-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展開 Rosin Modified Phenolic Resin PI136 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1600-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起
Rosin Modified Phenolic Resin PI138 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI138 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2400-3200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展開 Rosin Modified Phenolic Resin PI138 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2400-3200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起
Rosin Modified Phenolic Resin PI142 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI142 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展開 Rosin Modified Phenolic Resin PI142 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起
Rosin Modified Phenolic Resin PI145 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI145 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 500-900 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used...展開 Rosin Modified Phenolic Resin PI145 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 500-900 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起
Rosin Modified Phenolic Resin PI146 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI146 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1300-1800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展開 Rosin Modified Phenolic Resin PI146 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1300-1800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起
Rosin Modified Phenolic Resin PI147 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI147 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 5500-8500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展開 Rosin Modified Phenolic Resin PI147 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 5500-8500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起
Rosin Modified Phenolic Resin PI148 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI148 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3500-5000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展開 Rosin Modified Phenolic Resin PI148 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3500-5000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起
Rosin Modified Phenolic Resin PI149 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI149 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3000-4500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展開 Rosin Modified Phenolic Resin PI149 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3000-4500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起
Rosin Modified Phenolic Resin PI152 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI152 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3800-5000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展開 Rosin Modified Phenolic Resin PI152 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3800-5000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起
Rosin Modified Phenolic Resin PI155 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI155 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1800-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展開 Rosin Modified Phenolic Resin PI155 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1800-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起
Rosin Modified Phenolic Resin PI160 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI160 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 10000-14000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly ...展開 Rosin Modified Phenolic Resin PI160 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 10000-14000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起
Speedcure 2-ITX Lambson Group Ltd. Speedcure 2-ITX is a cream to pale yellow powder and a photoinitiator which, when used with tertiary amine synergists, induces a rapid photo-polymerisation of suitable resin formulations. This product can be applied to wood varnishes, printing inks as wel...展開 Speedcure 2-ITX is a cream to pale yellow powder and a photoinitiator which, when used with tertiary amine synergists, induces a rapid photo-polymerisation of suitable resin formulations. This product can be applied to wood varnishes, printing inks as well as decorative coatings for metal cans and food cartons. 收起
Speedcure 500 Lambson Group Ltd. Speedcure 500 is a eutectic liquid mixture of a type one and a type two photoinitiator. It is used to initiate the photo-polymerisation of chemically unsaturated pre-polymers, in combination with mono- and multifunctional monomers. This colourless to slig...展開 Speedcure 500 is a eutectic liquid mixture of a type one and a type two photoinitiator. It is used to initiate the photo-polymerisation of chemically unsaturated pre-polymers, in combination with mono- and multifunctional monomers. This colourless to slightly yellow liquid enables surface and depth cure as well as lower viscosity formulations for clear coatings, wood lacquers and printing inks. 收起
Speedcure 5040 Lambson Group Ltd. Speedcure 5040 is a benzophenone/thioxanthone free mixture of free radical photoinitiators developed in response to technical requirements in graphic arts, electronics and industrial coatings industries. This transparent yellow to red/brown liquid is used...展開 Speedcure 5040 is a benzophenone/thioxanthone free mixture of free radical photoinitiators developed in response to technical requirements in graphic arts, electronics and industrial coatings industries. This transparent yellow to red/brown liquid is used in applications where low odor and high performance are required or when curing is tougher in pigmented systems for improved wetting. It is applied to UV Flexo, offset and screen inks. 收起
Speedcure 5070 Lambson Group Ltd. Speedcure 5070 is a low migration formulated photoinitiator created for food packaging related applications of UV flexographic, offset and screen printing inks where low migration as a main characteristic is mandatory, but can be used in applications wher...展開 Speedcure 5070 is a low migration formulated photoinitiator created for food packaging related applications of UV flexographic, offset and screen printing inks where low migration as a main characteristic is mandatory, but can be used in applications where low odour and migration are necessary in troublesome cure colours like black. This transparent yellow to amber liquid can be applied to UV Flexo, offset, screen and UV printing inks. 收起
Speedcure 7005 Lambson Group Ltd. Speedcure 7005 is a polymeric photoinitiator suitable for use when benzophenone free formulations are necessary. This will induce rapid photo-polymerisation when formulated with a suitable polymeric tertiary amine synergist, such as Speedcure 7040. It com...展開 Speedcure 7005 is a polymeric photoinitiator suitable for use when benzophenone free formulations are necessary. This will induce rapid photo-polymerisation when formulated with a suitable polymeric tertiary amine synergist, such as Speedcure 7040. It comes as an off white to pale yellow liquid with low migration, odour and toxicity used in printing inks, wood lacquers, over print varnishes, putties and fillers for particle and chip boards, adhesives and solder masks. 收起
Speedcure 7010 Lambson Group Ltd. Speedcure 7010 is a highly efficient polymeric thioxanthone type photoinitiator which when used with a polymeric tertiary amine synergist such as Speedcure 7040 or an acrylated amine, induces the rapid photo-polymerisation of suitable resin formulations. ...展開 Speedcure 7010 is a highly efficient polymeric thioxanthone type photoinitiator which when used with a polymeric tertiary amine synergist such as Speedcure 7040 or an acrylated amine, induces the rapid photo-polymerisation of suitable resin formulations. This cream to pale yellow free flowing powder inhibits low migration and yellowing in addition to adding depth cure in pigmented in thick films. It can be applied to printing inks, wood coatings and decorative coatings for metal cans and food cartons. 收起
Speedcure 7010-L Lambson Group Ltd. Speedcure 7010L is a polymeric thioxanthone type photoinitiator which when used with a polymeric tertiary amine synergist such as Speedcure 7040 or an acrylated amine, induces the rapid photo-polymerisation of suitable resin formulations. This pale yellow...展開 Speedcure 7010L is a polymeric thioxanthone type photoinitiator which when used with a polymeric tertiary amine synergist such as Speedcure 7040 or an acrylated amine, induces the rapid photo-polymerisation of suitable resin formulations. This pale yellow liquid inhibits low migration and yellowing in addition to providing depth cure in pigmented and thick films. It is applied to printing inks, wood coatings and decorative coatings for metal cans and food cartons. 收起
Speedcure 7040 Lambson Group Ltd. Speedcure 7040 is an amine synergist which, when used with Type II polymeric photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This pale amber liquid contains low migration, toxicity and odour in a...展開 Speedcure 7040 is an amine synergist which, when used with Type II polymeric photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This pale amber liquid contains low migration, toxicity and odour in addition to solubility in most common organic solvents and UV curable monomers. It can be applied to wood varnishes, printing inks, over printing varnishes, decorative coatings for metal cans and food cartons, adhesives, sealants and metal primers. 收起
Speedcure 73 Lambson Group Ltd. Speedcure 73 is a Type I photoinitiator. Radicals are formed by an α cleavage mechanism and as such does not require an amine synergist to promote radical production. This clear colourless to yellowish liquid produces hard coatings with high gloss and pro...展開 Speedcure 73 is a Type I photoinitiator. Radicals are formed by an α cleavage mechanism and as such does not require an amine synergist to promote radical production. This clear colourless to yellowish liquid produces hard coatings with high gloss and provides good surface cure with low yellowing. It can be applied to clear coatings, overprint varnishes, wood laquers, silicone based coatings and printing inks. 收起
Speedcure 84 Lambson Group Ltd. Speedcure 84 is a Type I photoinitiator. Radicals are formed by an α cleavage mechanism and as such does not require an amine synergist to promote radical production. This white crystalline powder produces hard coatings with high gloss and provides good s...展開 Speedcure 84 is a Type I photoinitiator. Radicals are formed by an α cleavage mechanism and as such does not require an amine synergist to promote radical production. This white crystalline powder produces hard coatings with high gloss and provides good surface core with low yellowing. It is applied to clear coatings, overprint varnishes, wood lacquers, adhesives, silicone based coatings and printing inks. 收起
Speedcure 97 Lambson Group Ltd. Speedcure 97 is a Type I photoinitiator used to initiate UV photo-polymerisation typically with unsaturated monomers and polymers such as acrylates/methacrylates or vinyl polymers. This white powder increases cure speed, provide surface core and good reac...展開 Speedcure 97 is a Type I photoinitiator used to initiate UV photo-polymerisation typically with unsaturated monomers and polymers such as acrylates/methacrylates or vinyl polymers. This white powder increases cure speed, provide surface core and good reactivity. It is applied to clear coatings, overprint varnishes, wood lacquers, adhesives, silicone based coatings and printing inks. 收起
Speedcure 976 Lambson Group Ltd. Speedcure 976 is a cationic photoinitiator and a mixture of triarylsulphonium hexafluoroantimonate salts in propylene carbonate. This yellow liquid enables a fast cure in inks and overprint varnishes. It is also more geared for thicker coatings and films.
Speedcure 976D Lambson Group Ltd. Speedcure 976D is a cationic photoinitiator and a mixture of triarylsulphonium hexafluoroantimonate salts in a reactive solvent. This pale yellow transparent liquid enables a fast cure in inks and overprint varnishes and is suitable for clear and thicker ...展開 Speedcure 976D is a cationic photoinitiator and a mixture of triarylsulphonium hexafluoroantimonate salts in a reactive solvent. This pale yellow transparent liquid enables a fast cure in inks and overprint varnishes and is suitable for clear and thicker coatings greater than 25μm. 收起
Speedcure BDMB Lambson Group Ltd. Speedcure BDMB is a reactive Type I photoinitiator that will induce rapid photo-polymerisation when exposed to UV light. This fine pale yellow powder can be used as a through cure in dark colour pigmented systems and will cure complex systems with other c...展開 Speedcure BDMB is a reactive Type I photoinitiator that will induce rapid photo-polymerisation when exposed to UV light. This fine pale yellow powder can be used as a through cure in dark colour pigmented systems and will cure complex systems with other co-initiators. It is applied to UV curable screen printing inks, varnishes for paper metal and plastics, photresists and solder maks, UV curable off-set printing inks, printing plates and adhesives. 收起
Speedcure BEDB Lambson Group Ltd. Speedcure BEDB is a liquid amine synergist which, when used with Type II photoinitiators, generates free radicals capable of initiating the rapid photo-polymerisation of suitable resin formulations. Thioxanthone photoinitiators are highly soluble in Speed...展開 Speedcure BEDB is a liquid amine synergist which, when used with Type II photoinitiators, generates free radicals capable of initiating the rapid photo-polymerisation of suitable resin formulations. Thioxanthone photoinitiators are highly soluble in Speedcure BEDB, affording a single liquid additive. This clear, pale yellow liquid has good soluble properties, low toxicity and low odor. It is used in wood varnishes, printing inks, over print varnishes, decorative coatings for metal cans and food cartons, adhesives, sealants and metal primers. 收起
Speedcure BEM Lambson Group Ltd. Speedcure BEM is a liquid, non-yellowing photoinitiator which, with tertiary amine synergists, initiates rapid polymerisation of suitable resin formulations. This clear light yellow oily liquid is a eutectic mixture of benzophenone and methylbenzophenones...展開 Speedcure BEM is a liquid, non-yellowing photoinitiator which, with tertiary amine synergists, initiates rapid polymerisation of suitable resin formulations. This clear light yellow oily liquid is a eutectic mixture of benzophenone and methylbenzophenones that helps reduce viscosity of formulations, contains solubility and compatibility with unsaturated monomers and does not contribute to photo yellowing. It is applied to printing inks, clear overprint varnishes, wood varnishes, decorative coatings for metal cans and food cartons as well as adhesives. 收起
Speedcure BKL Lambson Group Ltd. Speedcure BKL is a Type I photoinitiator that forms radicals rapidly by an α cleavage mechanism that initiates the photo-polymerisation of suitable resin formulations. This white crystalline powder is compatible with most pre-polymers, resins and monomers...展開 Speedcure BKL is a Type I photoinitiator that forms radicals rapidly by an α cleavage mechanism that initiates the photo-polymerisation of suitable resin formulations. This white crystalline powder is compatible with most pre-polymers, resins and monomers used in UV curing industry and is a general purpose photoinitiator for inks and coatings. It can be applied to printing inks, over print varnishes, wood lacquers, adhesives as well as putties and fillers for particle and chip boards. 收起
Speedcure BMS Lambson Group Ltd. Speedcure BMS is a Type II photoinitiator that can induce the rapid photo-polymerisation when formulated with a suitable tertiary amine synergist. This white powder, when used in combination with other substances, can initiate polymerisation of pigmented ...展開 Speedcure BMS is a Type II photoinitiator that can induce the rapid photo-polymerisation when formulated with a suitable tertiary amine synergist. This white powder, when used in combination with other substances, can initiate polymerisation of pigmented systems and can form a single liquid additive with a liquid amine synergist comprising both initiator and synergist. It also has low yellowing and can be used in printing inks, clear over print varnishes and adhesives as well as decorative coatings for metal cans and food cartons. 收起
Speedcure BP Lambson Group Ltd. Speedcure BP is a Type II photoinitiator that, when used with tertiary amine synergists, initiates the rapid photo-polymerisation of suitable resin formulations. These white flakes are commonly used to achieve a fast surface cure and help oxygen inhibitio...展開 Speedcure BP is a Type II photoinitiator that, when used with tertiary amine synergists, initiates the rapid photo-polymerisation of suitable resin formulations. These white flakes are commonly used to achieve a fast surface cure and help oxygen inhibition in printing inks, clear over print varnishes, wood varnishes, decorative coatings for metal cans and cartons as well as adhesives. 收起
Speedcure CPTX Lambson Group Ltd. Speedcure CPTX is a thioxanthone photoinitiator which, when used with tertiary amine synergists, induces the rapid photo-polymerisation of suitable resin formulations and can also be used with Speedcure 73 to sensitise iodonium salts in cationic cure. Thi...展開 Speedcure CPTX is a thioxanthone photoinitiator which, when used with tertiary amine synergists, induces the rapid photo-polymerisation of suitable resin formulations and can also be used with Speedcure 73 to sensitise iodonium salts in cationic cure. This yellow crystalline powder contains fast cure speed, excellent depth cure and high final degree of cure suitable for pigmented and thick films. It can be applied to printing inks, wood varnishes, adhesives as well as decorative coatings for metal cans and food cartons. 收起
Speedcure DETX Lambson Group Ltd. Speedcure DETX is a photoinitiator which, when used with tertiary amine synergists, induces the rapid photo-polymerisation of suitable resin formulations. This yellow powder can provide surface cure of various films, improve ink quality and reduce prepara...展開 Speedcure DETX is a photoinitiator which, when used with tertiary amine synergists, induces the rapid photo-polymerisation of suitable resin formulations. This yellow powder can provide surface cure of various films, improve ink quality and reduce preparation time in printing inks, wood varnishes, decorative coatings for metal cans and food cartons as well as adhesives. 收起
Speedcure DMB Lambson Group Ltd. Speedcure DMB is an amine synergist that, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This pale yellow liquid contains low volatiliy and freezing point in addition to l...展開 Speedcure DMB is an amine synergist that, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This pale yellow liquid contains low volatiliy and freezing point in addition to little photo-yellowing. It is applied to printing inks, wood varnishes, decorative coatings for metal cans and food cartons, adhesives and metal primers. 收起
Speedcure EAQ Lambson Group Ltd. Speedcure EAQ is a Type II photoinitiator that absorbs in the UV spectrum at 330 nm. In the presence of a hydrogen donor, highly reactive donor radicals are formed, which are capable of initiating the polymerisation process efficiently. This pale yellow ...展開 Speedcure EAQ is a Type II photoinitiator that absorbs in the UV spectrum at 330 nm. In the presence of a hydrogen donor, highly reactive donor radicals are formed, which are capable of initiating the polymerisation process efficiently. This pale yellow powder cures without an amine-type hydrogen donor and has its effectiveness raised by the presence of oxygen. It is used in curing resists and printing inks that are acid treated post-cure. 收起
Speedcure EDB Lambson Group Ltd. Speedcure EDB is an amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This off white to white powder is used in wood varnishes, printing inks, over pri...展開 Speedcure EDB is an amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This off white to white powder is used in wood varnishes, printing inks, over printing varnishes, decorative coatings for metal cans and food cartons, adhesives, sealants and metal primers. 收起
Speedcure EHA Lambson Group Ltd. Speedcure EHA is an amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate the photo-polymerisation of suitable resin formulations. This pale yellow liquid contains a low freezing point and volatility in addit...展開 Speedcure EHA is an amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate the photo-polymerisation of suitable resin formulations. This pale yellow liquid contains a low freezing point and volatility in addition to acting as a useful solvent in UV formulations. It can be applied to wood varnishes, printing inks, adhesives and decorative coatings for metal cans and food cartons. 收起
Speedcure EMK Lambson Group Ltd. Speedcure EMK is an efficient UV photoinitiator or hydrogen donor absorbing at 377 nm and used primarily in the electronics sector. This pale yellow solid enables a fast cure in cure resists and printing inks.
Speedcure EPD Lambson Group Ltd. Speedcure EPD is a highly efficient amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This white to off white powder has low toxicity and odour in addi...展開 Speedcure EPD is a highly efficient amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This white to off white powder has low toxicity and odour in addition to solubility in most common organic solvents and UV curable monomers. It is applied to wood varnishes, printing inks, decorative coatings for metal cans and food cartons, adhesives, sealants and metal primers. 收起
Speedcure ITX Lambson Group Ltd. Speedcure ITX is a pale yellow powder and a photoinitiator which, when used with tertiary amine synergists, induces a rapid photo-polymerisation of suitable resin formulations. This product can be applied to wood varnishes, printing inks as well as decora...展開 Speedcure ITX is a pale yellow powder and a photoinitiator which, when used with tertiary amine synergists, induces a rapid photo-polymerisation of suitable resin formulations. This product can be applied to wood varnishes, printing inks as well as decorative coatings for metal cans and food cartons. 收起
Speedcure MBB Lambson Group Ltd. Speedcure MBB is a near odourless photoinitiator which, when used with tertiary amine synergists, initiates the rapid polymerisation of suitable resin formulations. This white to off white crystalline powder does not effect photo yellowing, promotes rapid...展開 Speedcure MBB is a near odourless photoinitiator which, when used with tertiary amine synergists, initiates the rapid polymerisation of suitable resin formulations. This white to off white crystalline powder does not effect photo yellowing, promotes rapid surface cure and ideal for food packing printing inks due to its minimal odor. It can be used in printing inks, decorative coatings for metal cans and food cartons as well as clear over print and wood varnishes. 收起
Speedcure MBF Lambson Group Ltd. Speedcure MBF is a photoinitiator that is commonly used for overprint varnish and wood coating applications where excellent surface cure response and non-yellowing are desired. This clear, pale yellow liquid is recommended for systems requiring low odor a...展開 Speedcure MBF is a photoinitiator that is commonly used for overprint varnish and wood coating applications where excellent surface cure response and non-yellowing are desired. This clear, pale yellow liquid is recommended for systems requiring low odor and enables a surface cure as well as increased cross-link density. In addition to wood coating and overprint varnish, it can be applied to inks, industrial coatings and adhesives. 收起
Speedcure MBP Lambson Group Ltd. Speedcure MBP is a cost effective photoinitiator used when benzophenone free formulations are required. It is a free-flowing, easy-to-handle, low-dusting, white crystalline small-flaked material that contains the same curing efficiency and performance cha...展開 Speedcure MBP is a cost effective photoinitiator used when benzophenone free formulations are required. It is a free-flowing, easy-to-handle, low-dusting, white crystalline small-flaked material that contains the same curing efficiency and performance characteristics as benzophenone. It can be applied to printing inks, wood lacquers, over print varnishes, putties and fillers for particle and chips boards, adhesives and solder masks. 收起
Speedcure PBZ Lambson Group Ltd. Speedcure PBZ is a photoinitiator, normally used with a tertiary amine synergist in the formulation of UV curable coatings. This off white powder absorbs at longer wavelengths than benzophenone which enables a faster cure. It can be applied to printing in...展開 Speedcure PBZ is a photoinitiator, normally used with a tertiary amine synergist in the formulation of UV curable coatings. This off white powder absorbs at longer wavelengths than benzophenone which enables a faster cure. It can be applied to printing inks, wood varnishes, over print varnishes, decorative coatings for metal cans and food cartons, adhesives and metal primers. 收起
Speedcure TPO Lambson Group Ltd. Speedcure TPO is a Type I homolytic photoinitiator, which absorbs UV light at longer wavelengths, making it suitable for curing pigmented formulations. This pale yellow crystalline powder undergoes "photo-bleaching" to make it effective for curing thick f...展開 Speedcure TPO is a Type I homolytic photoinitiator, which absorbs UV light at longer wavelengths, making it suitable for curing pigmented formulations. This pale yellow crystalline powder undergoes "photo-bleaching" to make it effective for curing thick films. It is applied to wood coatings and filler, glass fibre reinforced polyester laminates, manufacture of printing plates and pigmented printing inks. 收起
Speedcure TPO-L Lambson Group Ltd. Speedcure TPO-L is a liquid Type I photoinitiator that absorbs at 380 nm. The photo-fragmentation produces benzoyl and phosphinyl radicals that can initiate the polymerisation of formulations containing acrylates, unsaturated polyesters and styrene. This ...展開 Speedcure TPO-L is a liquid Type I photoinitiator that absorbs at 380 nm. The photo-fragmentation produces benzoyl and phosphinyl radicals that can initiate the polymerisation of formulations containing acrylates, unsaturated polyesters and styrene. This yellow liquid cures coating containing titanium dioxide, is a safer cure for opaque systems and gives a good through-cure. It is applied to UV offset and flexo inks, white pigmented UV lacquers, UV screen inks, UV overprint varnishes and printing plates. 收起
Speedcure XFe Lambson Group Ltd. Speedcure XFe is a liquid photoinitiator developed for the rapid radiation curing of thick layers typically used in photo-resists and printing inks; it is used primarily in the electronics industry. A transparent pale yellow liquid, it exhibits little odo...展開 Speedcure XFe is a liquid photoinitiator developed for the rapid radiation curing of thick layers typically used in photo-resists and printing inks; it is used primarily in the electronics industry. A transparent pale yellow liquid, it exhibits little odour and volatility while maintaining high cure speed. 收起
Speedcure XFs Lambson Group Ltd. Speedcure XFs is a liquid photoinitiator specifically developed for use in clear coatings such as varnishes and lacquers for wood, paper, metals and plastics. It is also used in the formulation of adhesives and printing inks. A transparent pale yellow liq...展開 Speedcure XFs is a liquid photoinitiator specifically developed for use in clear coatings such as varnishes and lacquers for wood, paper, metals and plastics. It is also used in the formulation of adhesives and printing inks. A transparent pale yellow liquid, it has little odour while exhibiting non-yellowing post curing and efficient surface core. 收起
Speedcure XFw Lambson Group Ltd. Speedcure XFw is a transparent pale yellow liquid liquid Type I photoinitiator for use in white inks and coatings. It is a high performance, easy to handle liquid system that provides high reactivity, efficient through cure, low yellowing and good solubil...展開 Speedcure XFw is a transparent pale yellow liquid liquid Type I photoinitiator for use in white inks and coatings. It is a high performance, easy to handle liquid system that provides high reactivity, efficient through cure, low yellowing and good solubility in many ink and resin systems. The product can be used for all UV flexo, screen and off-set inks; white pigmented UV lacquers and other white pigmented systems while exhibiting little odour and non-yellowing post curing. 收起
Speedcure XKm Lambson Group Ltd. Speedcure XKm is a hybrid photoinitiator that can used as a type I initiator for clear and white pigmented systems or can also be used with an amine synergist or acrylated amine in order to improve the speed of surface cure. A white to off white powder, i...展開 Speedcure XKm is a hybrid photoinitiator that can used as a type I initiator for clear and white pigmented systems or can also be used with an amine synergist or acrylated amine in order to improve the speed of surface cure. A white to off white powder, it exhibits little yellowing, volatility and odour while curing white pigmented coatings, clear coatings and pigmented printing inks. 收起
Spolostan 3G Enaspol AS Spolostan 3G is a sodium salt dispersing agent that is a yellow-brown dust free powder in appearance with a low-molecular condensate that prevents the creation of dye agglomerates and enhances dye penetration, uniform dyeing and color fastness. This produ...展開 Spolostan 3G is a sodium salt dispersing agent that is a yellow-brown dust free powder in appearance with a low-molecular condensate that prevents the creation of dye agglomerates and enhances dye penetration, uniform dyeing and color fastness. This product is commonly applied in dyes, pigments, paints, and coatings. It is also an efficient dispersing agent in the grinding of pigments and printing inks. 收起
Spolostan 3L Enaspol AS Spolostan 3L is a sodium salt dispersing agent that is a dark brown liquid in appearance with a low-molecular condensate that prevents the creation of dye agglomerates and enhances dye penetration, uniform dyeing and color fastness. This product is common...展開 Spolostan 3L is a sodium salt dispersing agent that is a dark brown liquid in appearance with a low-molecular condensate that prevents the creation of dye agglomerates and enhances dye penetration, uniform dyeing and color fastness. This product is commonly applied in dyes, pigments, paints, and coatings. It is also an efficient dispersing agent in the grinding of pigments and printing inks. 收起
TF-1000 Carbon black Dongguan Harvesting Pigments Manufacturing Co., Ltd. TF-1000 Carbon black is a product that is gathered from incomplete burned carbonaceous substances. It is made of protogenesis particles and turned into high dispersing carbon black pigments after going through special treatment. It is used in the PVC, TPR...展開 TF-1000 Carbon black is a product that is gathered from incomplete burned carbonaceous substances. It is made of protogenesis particles and turned into high dispersing carbon black pigments after going through special treatment. It is used in the PVC, TPR granulation process, printing ink, color master batch process, stoving varnish coating process, and lacquer. The oxygen of this product is 0.65% and the density is 1.5%. Also the average particle diameter is 19 nm. 收起
TF-320 Ultramarine Dongguan Harvesting Pigments Manufacturing Co., Ltd. TF-320 Ultramarine is a coating that can be used in the printing ink, latex, paint, architecture paper, and detergent industry. This product is known for its wonderful fastness to light, weather, alkali, and heat. TF-320 Ultramarine has a heat resistance ...展開 TF-320 Ultramarine is a coating that can be used in the printing ink, latex, paint, architecture paper, and detergent industry. This product is known for its wonderful fastness to light, weather, alkali, and heat. TF-320 Ultramarine has a heat resistance of 300°C and a lead content of < 90PPM. 收起
TF-400 Ultramarine Dongguan Harvesting Pigments Manufacturing Co., Ltd. TF-400 Ultramarine is known for its wonderful fastness to light, weather, alkali, and heat. It is also known for is its glossy and pure color lustre and dispersed performance. This product is a coating that can be used in the printing ink, latex, architec...展開 TF-400 Ultramarine is known for its wonderful fastness to light, weather, alkali, and heat. It is also known for is its glossy and pure color lustre and dispersed performance. This product is a coating that can be used in the printing ink, latex, architecture paper, and paint industry. It has a heat resistance of 300°C and a lead content of < 90PPM. 收起
TF-500 Ultramarine Dongguan Harvesting Pigments Manufacturing Co., Ltd. TF-500 Ultramarine is a coating that can be used in the printing ink, latex, architecture paper, and paint industry. It has a heat resistance of 300°C and a lead content of < 90PPM. This product is known for its wonderful fastness to light, weather, alkal...展開 TF-500 Ultramarine is a coating that can be used in the printing ink, latex, architecture paper, and paint industry. It has a heat resistance of 300°C and a lead content of < 90PPM. This product is known for its wonderful fastness to light, weather, alkali, and heat. 收起
TF-600 Ultramarine Dongguan Harvesting Pigments Manufacturing Co., Ltd. TF-600 Ultramarine is a coating that can be used in the printing ink, latex, architecture paper, and paint industry. It has a heat resistance of 300°C and a lead content of < 90PPM. This product is known for its wonderful fastness to light, weather, alkal...展開 TF-600 Ultramarine is a coating that can be used in the printing ink, latex, architecture paper, and paint industry. It has a heat resistance of 300°C and a lead content of < 90PPM. This product is known for its wonderful fastness to light, weather, alkali, and heat. 收起
TF-68 Ultramarine Dongguan Harvesting Pigments Manufacturing Co., Ltd. TF-68 Ultramarine is a coating that can be used in the printing ink, latex, architecture paper, and paint industry. This product is known for its wonderful fastness to light, weather, alkali, and heat. It is also known for is its glossy and pure color lus...展開 TF-68 Ultramarine is a coating that can be used in the printing ink, latex, architecture paper, and paint industry. This product is known for its wonderful fastness to light, weather, alkali, and heat. It is also known for is its glossy and pure color lustre and dispersed performance. It has a heat resistance of 300°C and a lead content of < 90PPM. 收起
TF-77 Ultramarine Dongguan Harvesting Pigments Manufacturing Co., Ltd. TF-77 Ultramarine is a coating that can be used in the printing ink, latex, architecture paper, and paint industry. TF-77 Ultramarine has a heat resistance of 300°C and this product is known for its wonderful fastness to light, weather, alkali, and heat.
TF-79 Ultramarine Dongguan Harvesting Pigments Manufacturing Co., Ltd. TF-79 Ultramarine is a coating that can be used in the printing ink, latex, architecture paper, and paint industry. This product is known for its wonderful fastness to light, weather, alkali, and heat. It also has a heat resistance of 300°C.
TF-BV88 Ultramarine Dongguan Harvesting Pigments Manufacturing Co., Ltd. TF-BV88 Ultramarine is a coating that can be used in the printing ink, latex, architecture paper, and paint industry. This product is known for its wonderful fastness to light, weather, alkali, and heat. It is also known for is its glossy and pure color l...展開 TF-BV88 Ultramarine is a coating that can be used in the printing ink, latex, architecture paper, and paint industry. This product is known for its wonderful fastness to light, weather, alkali, and heat. It is also known for is its glossy and pure color lustre and dispersed performance. It has a heat resistance of 300°C and a lead content of < 90PPM. 收起
TF-BV99 Ultramarine Dongguan Harvesting Pigments Manufacturing Co., Ltd. TF-BV99 Ultramarine is a coating that can be used in the printing ink, latex, architecture paper, and paint industry. It has a heat resistance of 300°C and a lead content of < 90PPM. This product is known for its wonderful fastness to light, weather, alka...展開 TF-BV99 Ultramarine is a coating that can be used in the printing ink, latex, architecture paper, and paint industry. It has a heat resistance of 300°C and a lead content of < 90PPM. This product is known for its wonderful fastness to light, weather, alkali, and heat. It is also known for is its glossy and pure color lustre and dispersed performance. 收起
TFA100 Carbon black Dongguan Harvesting Pigments Manufacturing Co., Ltd. TFA100 Carbon black is a product that is gathered from incomplete burned carbonaceous substances. It is made of protogenesis particles and turned into high dispersing carbon black pigments after going through special treatment. This product is used in the...展開 TFA100 Carbon black is a product that is gathered from incomplete burned carbonaceous substances. It is made of protogenesis particles and turned into high dispersing carbon black pigments after going through special treatment. This product is used in the PVC, TPR granulation process, printing ink, color master batch process, stoving varnish coating process, and lacquer. The oxygen of this product is 0.70% and the density is 1.7%. Also the average particle diameter is 27nm. 收起
TFCC P.Y. 191 Dongguan Harvesting Pigments Manufacturing Co., Ltd. TFCC P.Y. 191 is a transparent coating with a great heat resistance of 230°C. It stops HDPE products from changing or shrinking and offers a great light fastness. It also has a good migration fastness and is often added in the coloration of the PP, ABS, P...展開 TFCC P.Y. 191 is a transparent coating with a great heat resistance of 230°C. It stops HDPE products from changing or shrinking and offers a great light fastness. It also has a good migration fastness and is often added in the coloration of the PP, ABS, PE, HIPS, TPR, POM, TPE, PU, and PVC processes. 收起
TFCC P.Y. 95 Dongguan Harvesting Pigments Manufacturing Co., Ltd. TFCC P.Y. 95 is a coating that is added into the coloration of the PP, ABS, PE, TPR, POM, PVC, PU, and TPE processes. This product has a yellow color with a red gloss and is also transparent. It has a heat resistance of 290°C which stops products from shr...展開 TFCC P.Y. 95 is a coating that is added into the coloration of the PP, ABS, PE, TPR, POM, PVC, PU, and TPE processes. This product has a yellow color with a red gloss and is also transparent. It has a heat resistance of 290°C which stops products from shrinking and changing. It also has a great migration resistance characteristic which is excellent for printing ink and its wonderful stability of flocculation. 收起
TFCC-116 Dongguan Harvesting Pigments Manufacturing Co., Ltd. TFCC-116 is a fluorescent peach bloom transparent coating that has a vivid and glossy shade, and also great tinting strength. This product offers wonderful migration resistance, it is non-toxic, formaldehyde free, and friendly to the environment. It is de...展開 TFCC-116 is a fluorescent peach bloom transparent coating that has a vivid and glossy shade, and also great tinting strength. This product offers wonderful migration resistance, it is non-toxic, formaldehyde free, and friendly to the environment. It is designed to be added to the PP, PE, PU, TPR, and PVC coloration processes. It has great solvent fastness and should be applied to the lacquer, coating, printing ink, and latex paint industries. 收起
TFCC-117 Dongguan Harvesting Pigments Manufacturing Co., Ltd. TFCC-117 is a fluorescent pink transparent coating that has a vivid and glossy shade, and also great tinting strength. This product is designed to be added to the PP, PE, PU, TPR, and PVC coloration processes. It offers wonderful migration resistance, it ...展開 TFCC-117 is a fluorescent pink transparent coating that has a vivid and glossy shade, and also great tinting strength. This product is designed to be added to the PP, PE, PU, TPR, and PVC coloration processes. It offers wonderful migration resistance, it is non-toxic, formaldehyde free, and friendly to the environment. It has great solvent fastness and should be applied to the lacquer, coating, printing ink, and latex paint industries. 收起
TFCC-118 Dongguan Harvesting Pigments Manufacturing Co., Ltd. TFCC-118 is a fluorescent rose red transparent coating that has a vivid and glossy shade, and also great tinting strength. It has great solvent fastness and should be applied to the lacquer, coating, printing ink, and latex paint industries. This product ...展開 TFCC-118 is a fluorescent rose red transparent coating that has a vivid and glossy shade, and also great tinting strength. It has great solvent fastness and should be applied to the lacquer, coating, printing ink, and latex paint industries. This product is designed to be added to the PP, PE, PU, TPR, and PVC coloration processes. It offers wonderful migration resistance, it is non-toxic, formaldehyde free, and friendly to the environment. 收起
TFCC-210 Dongguan Harvesting Pigments Manufacturing Co., Ltd. TFCC-210 is a fluorescent lemon yellow transparent coating that has a vivid and glossy shade, and also great tinting strength. It has great solvent fastness and should be applied to the lacquer, coating, printing ink, and latex paint industries. This prod...展開 TFCC-210 is a fluorescent lemon yellow transparent coating that has a vivid and glossy shade, and also great tinting strength. It has great solvent fastness and should be applied to the lacquer, coating, printing ink, and latex paint industries. This product is designed to be added to the PP, PE, PU, TPR, and PVC coloration processes. 收起