UL Prospector

成功!

成功保存搜索結果
Fumed Silica W-150 Shouguang Baote Chemical Co., Ltd. Fumed Silica W-150, in the form of a white powder, is made by hydrolyzing exertion chloroethane in oxy-hydrogen flame. It is mainly used in paint and coating as an additive agent to prevent thickening, and can also be applied in adhesives, fluid sealants,...展開 Fumed Silica W-150, in the form of a white powder, is made by hydrolyzing exertion chloroethane in oxy-hydrogen flame. It is mainly used in paint and coating as an additive agent to prevent thickening, and can also be applied in adhesives, fluid sealants, and printing inks. 收起
Fumed Silica W-200 Shouguang Baote Chemical Co., Ltd. Fumed Silica W-200, in the form of a white powder, is made by hydrolyzing exertion chloroethane in oxy-hydrogen flame. It is mainly used in paint and coating as an additive agent to prevent thickening, and can also be applied in adhesives, fluid sealants,...展開 Fumed Silica W-200, in the form of a white powder, is made by hydrolyzing exertion chloroethane in oxy-hydrogen flame. It is mainly used in paint and coating as an additive agent to prevent thickening, and can also be applied in adhesives, fluid sealants, and printing inks. 收起
NW-100 Naewoi Korea Resins NW-100 is an additive to improve levelling in organic solvent systems. Its main component is a high boiling hydrocarbon and ester compound. It is used to improve gloss, and is workable with print inks. NW-100 can be used in acrylic, alkyd melamine high te...展開 NW-100 is an additive to improve levelling in organic solvent systems. Its main component is a high boiling hydrocarbon and ester compound. It is used to improve gloss, and is workable with print inks. NW-100 can be used in acrylic, alkyd melamine high temperature baking systems, vinyl, acrylic and NC lacquer coatings, air drying chlorinated rubber systems, and epoxy air drying systems. 收起
NW-580 Naewoi Korea Resins NW-580 is a wetting and dispersing additive for water-based, solvent-borne, and solvent-free systems. Its main component is unsaturated polycarboxylic acid copolymer. It reduces the viscosity in products and also has anti-floating and anti-flooding proper...展開 NW-580 is a wetting and dispersing additive for water-based, solvent-borne, and solvent-free systems. Its main component is unsaturated polycarboxylic acid copolymer. It reduces the viscosity in products and also has anti-floating and anti-flooding properties . NW-580 is used in high concentration tinter, general industrial coating systems, automotive refinish coating systems, inks, marine and heavy duty coatings, and PCM and coil coatings. 收起
NW-6380H Naewoi Korea Resins NW-6380H is a wetting and dispersing additive for organic solvent systems. Its main component is a high molecular specialty polymer. It has high concentration tinter and wetting and dispersing effect for organic or inorganic pigments, and also is useful a...展開 NW-6380H is a wetting and dispersing additive for organic solvent systems. Its main component is a high molecular specialty polymer. It has high concentration tinter and wetting and dispersing effect for organic or inorganic pigments, and also is useful as a carbon black tinter. NW-6350 is used in general industrial coating systems, automotive coating systems, high concentration tinter and inks, coil and PCM coating systems. 收起
NW-950 Naewoi Korea Resins NW-950 is a wetting and dispersing additive for organic solvent systems. Its main component is a high molecular specialty copolymer. It is serves as a wetting and dispersing additive for PVC Sol and PU foam and also in pigment concentrates in polyol, plas...展開 NW-950 is a wetting and dispersing additive for organic solvent systems. Its main component is a high molecular specialty copolymer. It is serves as a wetting and dispersing additive for PVC Sol and PU foam and also in pigment concentrates in polyol, plasticizer, and unsaturated polyester. NW-950 is used in automotive and refinish coating systems, general industrial systems, high concentration tint and ink, and coil coatings. 收起
Silica Matting Agent BT-303 Shouguang Baote Chemical Co., Ltd. Silica Matting Agent BT-303, in the form of a colorless or white crystalline powder, consists of 99.9% silicon dioxide with good disperse heat, transparency, suspension, and matting efficiency. It is often used in the surface of the paint film coating and...展開 Silica Matting Agent BT-303, in the form of a colorless or white crystalline powder, consists of 99.9% silicon dioxide with good disperse heat, transparency, suspension, and matting efficiency. It is often used in the surface of the paint film coating and has applications in ink, leather paint, water-based paint, and plastic paint. 收起
Silica Matting Agent BT-303L Shouguang Baote Chemical Co., Ltd. Silica Matting Agent BT-303L, in the form of a colorless or white crystalline powder, consists of 99.9% silicon dioxide with good disperse heat, transparency, suspension, and matting efficiency. It is often used in the surface of the paint film coating an...展開 Silica Matting Agent BT-303L, in the form of a colorless or white crystalline powder, consists of 99.9% silicon dioxide with good disperse heat, transparency, suspension, and matting efficiency. It is often used in the surface of the paint film coating and has applications in ink, leather paint, water-based paint, and plastic paint. 收起
Spolostan 3G Enaspol AS Spolostan 3G is a sodium salt dispersing agent that is a yellow-brown dust free powder in appearance with a low-molecular condensate that prevents the creation of dye agglomerates and enhances dye penetration, uniform dyeing and color fastness. This produ...展開 Spolostan 3G is a sodium salt dispersing agent that is a yellow-brown dust free powder in appearance with a low-molecular condensate that prevents the creation of dye agglomerates and enhances dye penetration, uniform dyeing and color fastness. This product is commonly applied in dyes, pigments, paints, and coatings. It is also an efficient dispersing agent in the grinding of pigments and printing inks. 收起
Spolostan 3L Enaspol AS Spolostan 3L is a sodium salt dispersing agent that is a dark brown liquid in appearance with a low-molecular condensate that prevents the creation of dye agglomerates and enhances dye penetration, uniform dyeing and color fastness. This product is common...展開 Spolostan 3L is a sodium salt dispersing agent that is a dark brown liquid in appearance with a low-molecular condensate that prevents the creation of dye agglomerates and enhances dye penetration, uniform dyeing and color fastness. This product is commonly applied in dyes, pigments, paints, and coatings. It is also an efficient dispersing agent in the grinding of pigments and printing inks. 收起
Superfine White Carbon Black BT-301C Shouguang Baote Chemical Co., Ltd. Superfine White Carbon Black BT-301C, in the form of a white powder, is mainly used as an industrial product in art ware or as thickening agent in coatings, paints, silicon rubber, and printing oil base. It has good water absorption, is non-toxic, is not ...展開 Superfine White Carbon Black BT-301C, in the form of a white powder, is mainly used as an industrial product in art ware or as thickening agent in coatings, paints, silicon rubber, and printing oil base. It has good water absorption, is non-toxic, is not soluble in water or commonly acid, and dissolves in hydrofluoric acid and caustic alkali. 收起
Superfine White Carbon Black BT-40B Shouguang Baote Chemical Co., Ltd. Superfine White Carbon Black BT-40B, in the form of a white powder, is mainly used as an industrial product in art ware or as thickening agent in coatings, paints, silicon rubber, and printing oil base. It has good water absorption, is non-toxic, is not s...展開 Superfine White Carbon Black BT-40B, in the form of a white powder, is mainly used as an industrial product in art ware or as thickening agent in coatings, paints, silicon rubber, and printing oil base. It has good water absorption, is non-toxic, is not soluble in water or commonly acid, and dissolves in hydrofluoric acid and caustic alkali. 收起
Superfine White Carbon Black BT-40C Shouguang Baote Chemical Co., Ltd. Superfine White Carbon Black BT-40C, in the form of a white powder, is mainly used as an industrial product in art ware or as thickening agent in coatings, paints, silicon rubber, and printing oil base. It has good water absorption, is non-toxic, is not s...展開 Superfine White Carbon Black BT-40C, in the form of a white powder, is mainly used as an industrial product in art ware or as thickening agent in coatings, paints, silicon rubber, and printing oil base. It has good water absorption, is non-toxic, is not soluble in water or commonly acid, and dissolves in hydrofluoric acid and caustic alkali. 收起
Texicryl® 13-220 Scott Bader Texicryl® 13-220 is a self cross-linking acrylic copolymer emulsion that has a soft, flexible film after curing, providing a good resistance to washing on printed textiles. It offers good binding properties for pigments, making it ideal for pigment printi...展開 Texicryl® 13-220 is a self cross-linking acrylic copolymer emulsion that has a soft, flexible film after curing, providing a good resistance to washing on printed textiles. It offers good binding properties for pigments, making it ideal for pigment printing on flat screen and rotary systems. Texicryl® 13-220 also offers good adhesion on most substrates, with flexibility also ideal at low temperatures. Texicryl® 13-220 is suitable for the making of non-woven and flocking adhesives whether by pulverization, foaming or full bath methods. 收起
Texicryl® 13-224 Scott Bader Texicryl® 13-224 is a self cross-linking styrene acrylic copolymer emulsion that has good wet scrub resistance and a soft handle. It provides good binding properties for the pigment printing of textiles and can be used on flat frameworks or rotary systems...展開 Texicryl® 13-224 is a self cross-linking styrene acrylic copolymer emulsion that has good wet scrub resistance and a soft handle. It provides good binding properties for the pigment printing of textiles and can be used on flat frameworks or rotary systems. 收起
Texicryl® 13-503 Scott Bader Texicryl® 13-503 is a styrene acrylic copolymer emulsion that has a high gloss and good water and wet rub resistance when formulated into an ink system. It is ideal for use in the formulation of printing inks for substrates like polypropylene, polyethylen...展開 Texicryl® 13-503 is a styrene acrylic copolymer emulsion that has a high gloss and good water and wet rub resistance when formulated into an ink system. It is ideal for use in the formulation of printing inks for substrates like polypropylene, polyethylene and various foils. Application of the inks are made on non-absorbent, low surface energy substrates. 收起
Texicryl® 13-525 Scott Bader Texicryl® 13-525 is a styrene acrylic copolymer emulsion that has good flow/leveling properties together with an ability to obtain gloss levels that are close to the best water-based overprint varnishes, making it an ideal product for high-quality blister...展開 Texicryl® 13-525 is a styrene acrylic copolymer emulsion that has good flow/leveling properties together with an ability to obtain gloss levels that are close to the best water-based overprint varnishes, making it an ideal product for high-quality blister packaging with suitable seal integrity. Texicryl® 13-525 displays good compatibility with other components and will not block easily in a stack. It is free of APEO surfactants and is made to be the main binder in the formulation of blister seal adhesives with good graphic qualities. It is suited to other heat seal applications as well as being ideal as a modifying resin to cold seal adhesives, allowing the adhesive a better key to the substrate. 收起
Texicryl® 13-737 Scott Bader Texicryl® 13-737 is a carboxylated acrylate copolymer for use in aqueous flexographic printing inks and low paper curl applications. It has good pigment wetting, press wash-up and print transfer properties, along with good stability and low foaming in fle...展開 Texicryl® 13-737 is a carboxylated acrylate copolymer for use in aqueous flexographic printing inks and low paper curl applications. It has good pigment wetting, press wash-up and print transfer properties, along with good stability and low foaming in flexographic systems. 收起
Texicryl® 13-809 Scott Bader Texicryl® 13-809 is a styrene acrylic copolymer emulsion that is designed for water-based overprint varnishes, high gloss and heat-resistant inks. It has uses in flexograhpic and gravure inks and can also be used as a deblocking modifier.
Texicryl® 13-811 Scott Bader Texicryl® 13-811 is an acrylic copolymer emulsion that has good rub resistance and transfer properties and is ideal for use in water-based printing inks and in the making of high gloss and emulsion paints. In the form of its amine salt, the emulsion is u...展開 Texicryl® 13-811 is an acrylic copolymer emulsion that has good rub resistance and transfer properties and is ideal for use in water-based printing inks and in the making of high gloss and emulsion paints. In the form of its amine salt, the emulsion is used a sole or part-binder in flexographic printing inks that are water-based. Texicryl® 13-811 allows formulating latitude because solubilizing amines and wet-edge additives can be chosen by the formulator. 收起
Texicryl® 13-812 Scott Bader Texicryl® 13-812 is a carboxylated acrylic copolymer emulsion that has good rub resistance and transfer properties and is designed for water-based printing ink formulations. It has applications in flexographic inks for corrugated board and is also suitabl...展開 Texicryl® 13-812 is a carboxylated acrylic copolymer emulsion that has good rub resistance and transfer properties and is designed for water-based printing ink formulations. It has applications in flexographic inks for corrugated board and is also suitable as a pigment grinding medium and let down vehicle. 收起
Texicryl® 13-813 Scott Bader Texicryl® 13-813 is a styrene acrylic copolymer emulsion that is formulated to provide good gloss overprint and holdout over printed areas. It has been especially created to exhibit low-odor characteristics, offering additional compounding benefits. Texic...展開 Texicryl® 13-813 is a styrene acrylic copolymer emulsion that is formulated to provide good gloss overprint and holdout over printed areas. It has been especially created to exhibit low-odor characteristics, offering additional compounding benefits. Texicryl® 13-813 is designed for use in offset overprinting varnishes and certain graphic arts applications. 收起
Texicryl® 13-814 Scott Bader Texicryl® 13-814 is a styrene acrylic copolymer emulsion that has good flexibility and provides ideal adhesion to "difficult" non-absorbent substrates that are difficult to wet out. It also displays good "wet crinkle resistance" on foils and films. Texicr...展開 Texicryl® 13-814 is a styrene acrylic copolymer emulsion that has good flexibility and provides ideal adhesion to "difficult" non-absorbent substrates that are difficult to wet out. It also displays good "wet crinkle resistance" on foils and films. Texicryl® 13-814 displays low foaming, fast drying and good gloss in inks and OPV's. It is suitable as a main binder in flexo and gravure inks with good clarity ensuring its use in offset overprint varnishes as well. 收起
Texicryl® 13-818 Scott Bader Texicryl® 13-818 is a styrene acrylic copolymer emulsion that has fast drying and low foaming characteristics with good flexibility and MVTR behavior. It is ideal for use as the main binder in barrier coating applications where it shows low MVTR and Cobb ...展開 Texicryl® 13-818 is a styrene acrylic copolymer emulsion that has fast drying and low foaming characteristics with good flexibility and MVTR behavior. It is ideal for use as the main binder in barrier coating applications where it shows low MVTR and Cobb values. Texicryl® 13-818 is able to form strong films at normal room temperature, but varnishes and inks "key" faster to non-absorbent substrates if gentle heat is provided through force drying. 收起
Texicryl® 13-819 Scott Bader Texicryl® 13-819 is a styrene acrylic copolymer-based emulsion vehicle that is compatible with hard polymers usually used in the formulating of overprint varnishes and can be incorporated into OPV's to partially replace the hard polymer and boost gloss le...展開 Texicryl® 13-819 is a styrene acrylic copolymer-based emulsion vehicle that is compatible with hard polymers usually used in the formulating of overprint varnishes and can be incorporated into OPV's to partially replace the hard polymer and boost gloss levels. It is also compatible with a variety of heat-resistant waxes, defoamers and acrylic polymers usually used in heat-resistant overprint varnishes. Other benefits of Texicryl® 13-819 include a low odor, good resolubility and a higher gloss than conventional heat-resistant polymers. 收起
Texicryl® 13-824 Scott Bader Texicryl® 13-824 is a styrene acrylic copolymer emulsion that can be coalesced to provide a solvent and plasticizer-resistant film. It has been developed for the formulation of plasticizer-resistant inks.
Texicryl® S-02 Scott Bader Texicryl® S-02 is a low molecular-weight, alkali-soluble resin that is supplied in solid form and designed to give off gloss and resolubility, while maintaining low foaming behavior and good printability to water-based coatings in the graphic arts industr...展開 Texicryl® S-02 is a low molecular-weight, alkali-soluble resin that is supplied in solid form and designed to give off gloss and resolubility, while maintaining low foaming behavior and good printability to water-based coatings in the graphic arts industry. 收起
Texicryl® S-09 Scott Bader Texicryl® S-09 is an alkali-soluble styrene acrylic resin that is supplied in solid form and is made to give off gloss and resolubility to water-based coatings in the graphic arts industry. It has been developed for water-based coatings and inks.
Texicryl® S-0933 Scott Bader Texicryl® S-0933 is a 33% solution of solid styrene-acrylic resin in water, with ammonia added to enable solubility. This product is designed for use in a variety of flexible packaging applications - including pigmented inks, clear coatings, and adhesives...展開 Texicryl® S-0933 is a 33% solution of solid styrene-acrylic resin in water, with ammonia added to enable solubility. This product is designed for use in a variety of flexible packaging applications - including pigmented inks, clear coatings, and adhesives. 收起
Texicryl® S-0933M Scott Bader Texicryl® S-0933M is a styrene acrylic copolymer emulsion that has a 33% solids resin solution, solubilized with Monoethanolamine, in water. It is a vehicle made for use in various flexible packaging applications including pigmented systems like inks, coa...展開 Texicryl® S-0933M is a styrene acrylic copolymer emulsion that has a 33% solids resin solution, solubilized with Monoethanolamine, in water. It is a vehicle made for use in various flexible packaging applications including pigmented systems like inks, coatings and adhesives. When formulated into ink systems, it is ideal for gravure and flexographic applications. Texicryl® S-0933M is designed to give off good gloss, while maintaining low foaming and aiding good printability. 收起
Texicryl® S-12 Scott Bader Texicryl® S-12 is an alkali-soluble styrene acrylic resin created for water-based inks and coatings. The resin is provided in solid form and is designed to give off gloss and resolubility, while maintaining low foaming characteristics and aiding good prin...展開 Texicryl® S-12 is an alkali-soluble styrene acrylic resin created for water-based inks and coatings. The resin is provided in solid form and is designed to give off gloss and resolubility, while maintaining low foaming characteristics and aiding good printability in water-based coatings within the graphic arts industry. 收起
Texipol® 63-237 Scott Bader Texipol® 63-237 is an anionic inverse emulsion thickener, developed especially for the pigment printing of textiles. It is provided as a low viscosity, easy-to-use inverse emulsion which can be pumped and metered. Texipol® 63-237 is an ideal thickener for...展開 Texipol® 63-237 is an anionic inverse emulsion thickener, developed especially for the pigment printing of textiles. It is provided as a low viscosity, easy-to-use inverse emulsion which can be pumped and metered. Texipol® 63-237 is an ideal thickener for pigment printing of polyester, cotton, blended fabrics and other materials. Among the benefits are sharper and better-defined prints, good fastness in dry and wet applications, color brightness and ease of use compared to powders and non-dispersed gels. 收起
Texipol® 67-5055 Scott Bader Texipol® 67-5055 is a multifunctional, high efficiency synthetic thickener specifically designed for use with Chromojet carpet printing machinery. It features superb colour bleed resistance and excellent storage stability. This product is ideal for use in...展開 Texipol® 67-5055 is a multifunctional, high efficiency synthetic thickener specifically designed for use with Chromojet carpet printing machinery. It features superb colour bleed resistance and excellent storage stability. This product is ideal for use in print paste formulations that yield well-defined prints with excellent colour yield, brightness, and handling characteristics. 收起
Texipol® 67-5060 Scott Bader Texipol® 67-5060 is a multifunctional synthetic thickener, created especially for disperse, reactive, and acid-dye printing applications. It yields high definition prints with good brightness, color yield, and handling characteristics. This product can be...展開 Texipol® 67-5060 is a multifunctional synthetic thickener, created especially for disperse, reactive, and acid-dye printing applications. It yields high definition prints with good brightness, color yield, and handling characteristics. This product can be used in flat bed and rotary printing processes. 收起