| BT-B101 BRONOPOL | BioTio Group | BT-B101 BRONOPOL is a white crystalline powder that has a melting point of 126-131°C and a pH value of 5.0-7.0. This product is most commonly used as a broad-spectrum antimicrobial agent in coatings, paints, inks, and adhesive applications. | |
| BT-IN603 DTSA | BioTio Group | BT-IN603 DTSA is an off-white to light yellow powder that has a melting point of 280-290°C and a moisture content of ≤0.10%. This product is most commonly used as a chemical intermediate in dyes and biocides. | |
| BT-IN604 DCPI | BioTio Group | BT-IN604 DCPI is a white crystalline powder that has a content/assay of ≥98% and other isocyanate content of ≤1.0%. This product is most commonly used as an intermediate for the production of dyes. | |
| Leafing Aluminum Paste BT-AP400 | BioTio Group | Leafing Aluminum Paste BT-AP400 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥65%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展開 Leafing Aluminum Paste BT-AP400 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥65%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP401 | BioTio Group | Leafing Aluminum Paste BT-AP401 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥75%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展開 Leafing Aluminum Paste BT-AP401 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥75%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP402 | BioTio Group | Leafing Aluminum Paste BT-AP402 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展開 Leafing Aluminum Paste BT-AP402 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP403 | BioTio Group | Leafing Aluminum Paste BT-AP403 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥82%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展開 Leafing Aluminum Paste BT-AP403 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥82%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP404 | BioTio Group | Leafing Aluminum Paste BT-AP404 is a high pure aluminum powder that has a pigment content of 73±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展開 Leafing Aluminum Paste BT-AP404 is a high pure aluminum powder that has a pigment content of 73±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| LITHOPONE BT-IN600 | BioTio Group | LITHOPONE BT-IN600 is a white powder with a zinc sulfide content of ≥28% and a pH value of 7.2. This product is most commonly used in printing inks, marking paints, and coating applications. | |
| Polurene FP75 | S.A.P.I.C.I. SpA | Polurene FP75 is a polyurethane adduct with low free TDI content. This product meets EU, BFR, and FDA standards for food packaging. It can be used in 2K adhesives and inks. Polurene FP75 contains less than .5% TDI isocyanates. | |
| Polurene IR 51 AE | S.A.P.I.C.I. SpA | Polurene IR 51 AE is an isocyanurate with low free TDI content. This product dries quickly with limited yellowing. It can be used in polyurethane sealers, matt topcoats, adhesives, and inks. This product contains less than .3% TDI isocyanates. | |
| Polurene IR 51 K | S.A.P.I.C.I. SpA | Polurene IR 51 K is an aromatic isocyanurate based on toluenediisocyanate. This product cures quickly, with limited yellowing, good elasticity, and felxibility. It can be used in combination with any Rexin K saturated polyester in order to product prime...展開 Polurene IR 51 K is an aromatic isocyanurate based on toluenediisocyanate. This product cures quickly, with limited yellowing, good elasticity, and felxibility. It can be used in combination with any Rexin K saturated polyester in order to product primer or overprint varnishes. 收起 | |
| Polurene OK K | S.A.P.I.C.I. SpA | Polurene OK K is an aliphatic-aromatic isocyanurate. This product dries quickly. If used in combination with saturated polyesters, it can be used in the formulation of overprinting coatings and for inks with good non-yellowing properties. | |
| Polurene OK.D AE | S.A.P.I.C.I. SpA | Polurene OK.D AE is an aliphatic-aromatic isocyanurate. This product is compatible with nitrocellulose. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics and other...展開 Polurene OK.D AE is an aliphatic-aromatic isocyanurate. This product is compatible with nitrocellulose. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics and other substrates. Finally, it can be used in polyurethane adhesives and inks. This product contains less than .5% TDI or HDI isocyanates. 收起 | |
| Polurene T 70 AE | S.A.P.I.C.I. SpA | Polurene T 70 AE is an aliphatic polyisocyanate. When diluted, this product can be used to improve the performance of short or long oil drying resins. It can be used in 2K laminating adhesives and inks. It can also be used in 2K polyurethane coatings w...展開 Polurene T 70 AE is an aliphatic polyisocyanate. When diluted, this product can be used to improve the performance of short or long oil drying resins. It can be used in 2K laminating adhesives and inks. It can also be used in 2K polyurethane coatings with good chemical and weather resistance. This product contains less than .5% IPDI isocyanates. 收起 | |
| Polurgreen FP75-01 | S.A.P.I.C.I. SpA | Polurgreen FP75-01 is a polyurethane adduct. This product contains less than .1% TDI isocyanates. It may be used in 2K adhesives and inks. Polurgreen FP75-01 is in accord with EU, BFR, and FDA regulations for food packaging. | |
| Precipitated Barium Sulfate BT-IN601 | BioTio Group | Precipitated Barium Sulfate BT-IN601 is a white powder with a barium sulfate content of 98% and a maximum whiteness of 93. This product is most commonly used as a filler in printing ink, paint, surface coating, coated art paper, and dye applications. | |
| Rexin K 1939 | S.A.P.I.C.I. SpA | Rexin K 1939 is a solvent-based hydroxy-terminated saturated polyester resin. When used in the formulation of inks, this product's end result is light, clear, not sticky and highly resistant to aging, chemical agents, and heat. It can be used in the for...展開 Rexin K 1939 is a solvent-based hydroxy-terminated saturated polyester resin. When used in the formulation of inks, this product's end result is light, clear, not sticky and highly resistant to aging, chemical agents, and heat. It can be used in the formulation of 2K polyurethane overprinting lacquers and inks. 收起 | |
| Rexin K 411 | S.A.P.I.C.I. SpA | Rexin K 411 is a branched saturated polyester. This product has high chemical resistance, abrasion resistance, and surface hardness. It is compatible with nitrocellulose, urea, and melamine resins. This product can be used in high-performance inks for ...展開 Rexin K 411 is a branched saturated polyester. This product has high chemical resistance, abrasion resistance, and surface hardness. It is compatible with nitrocellulose, urea, and melamine resins. This product can be used in high-performance inks for prolonged and continuous use. 收起 | |
| Rexin K 6258 | S.A.P.I.C.I. SpA | Rexin K 6258 is a branched saturated polyester resin that is soluble in ethyl acetate. This product is compatible with nitrocellulose, urea and melamine resins. It can be used in the formulation of inks and overprint varnishes. | |
| Rexin K 6302 | S.A.P.I.C.I. SpA | Rexin K 6302 is a polyester resin. This product is soluble in ethyl acetate. It can be used in the formulation of inks and overprint varnishes. | |
| Sodium Alginate BT-IN607 | BioTio Group | Sodium Alginate BT-IN607 is a 40-mesh sized, light yellow powder that has a pH value of 6.0-7.0. This product is most commonly used as a thickener in reactive dyestuff, textile screen-printing, and carpet jet-printing applications. | |
| Titanium Dioxide Anatase BT-A11 | BioTio Group | Titanium Dioxide Anatase BT-A11 is a white powder that has a titanium dioxide content of ≤93% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, emulsion paints, and printing ink applications. | |
| Titanium Dioxide Anatase BT-A113 | BioTio Group | Titanium Dioxide Anatase BT-A113 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, emulsion paints, and printing ink applications. | |
| Titanium Dioxide Anatase BT-A114 | BioTio Group | Titanium Dioxide Anatase BT-A114 is a white powder that has a titanium dioxide content of ≥98% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, emulsion paints, and printing ink applications. | |
| Titanium Dioxide Rutile BT-R22 | BioTio Group | Titanium Dioxide Rutile BT-R22 is a white powder that has a titanium dioxide content of ≤90% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink appl...展開 Titanium Dioxide Rutile BT-R22 is a white powder that has a titanium dioxide content of ≤90% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink applications. 收起 | |
| Titanium Dioxide Rutile BT-R225 | BioTio Group | Titanium Dioxide Rutile BT-R225 is a white powder that has a titanium dioxide content of ≥93% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink app...展開 Titanium Dioxide Rutile BT-R225 is a white powder that has a titanium dioxide content of ≥93% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink applications. 收起 | |
| Titanium Dioxide Rutile BT-R226 | BioTio Group | Titanium Dioxide Rutile BT-R226 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.0-8.5. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink app...展開 Titanium Dioxide Rutile BT-R226 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.0-8.5. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink applications. 收起 | |
| Ucopol M 33/65 K | S.A.P.I.C.I. SpA | Ucopol M 33/65 K is an aromatic moisture-curing polyurethane resin. This product has good wetting of different substrates and inks, and is compatible with alkyds, saturated polyester resins, nitrocellulose and vinyl co-polymers. It can be used in overpr...展開 Ucopol M 33/65 K is an aromatic moisture-curing polyurethane resin. This product has good wetting of different substrates and inks, and is compatible with alkyds, saturated polyester resins, nitrocellulose and vinyl co-polymers. It can be used in overprint varnishes and flexographic processes. 收起 | |
| Ucopol OL 100 | S.A.P.I.C.I. SpA | Ucopol OL 100 is an oleo-urethanic resin. This product has good wetting properties. It can be used as an impregnating agent for wood, and in the formulation of 1K enamels with high solids content. It can also be used for the formulation of printing ink...展開 Ucopol OL 100 is an oleo-urethanic resin. This product has good wetting properties. It can be used as an impregnating agent for wood, and in the formulation of 1K enamels with high solids content. It can also be used for the formulation of printing inks and pigmented pastes. This product has been obtained from renewable raw materials. 收起 |
