| BT-B101 BRONOPOL | BioTio Group | BT-B101 BRONOPOL is a white crystalline powder that has a melting point of 126-131°C and a pH value of 5.0-7.0. This product is most commonly used as a broad-spectrum antimicrobial agent in coatings, paints, inks, and adhesive applications. | |
| BT-IN603 DTSA | BioTio Group | BT-IN603 DTSA is an off-white to light yellow powder that has a melting point of 280-290°C and a moisture content of ≤0.10%. This product is most commonly used as a chemical intermediate in dyes and biocides. | |
| BT-IN604 DCPI | BioTio Group | BT-IN604 DCPI is a white crystalline powder that has a content/assay of ≥98% and other isocyanate content of ≤1.0%. This product is most commonly used as an intermediate for the production of dyes. | |
| Leafing Aluminum Paste BT-AP400 | BioTio Group | Leafing Aluminum Paste BT-AP400 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥65%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展開 Leafing Aluminum Paste BT-AP400 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥65%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP401 | BioTio Group | Leafing Aluminum Paste BT-AP401 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥75%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展開 Leafing Aluminum Paste BT-AP401 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥75%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP402 | BioTio Group | Leafing Aluminum Paste BT-AP402 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展開 Leafing Aluminum Paste BT-AP402 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP403 | BioTio Group | Leafing Aluminum Paste BT-AP403 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥82%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展開 Leafing Aluminum Paste BT-AP403 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥82%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP404 | BioTio Group | Leafing Aluminum Paste BT-AP404 is a high pure aluminum powder that has a pigment content of 73±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展開 Leafing Aluminum Paste BT-AP404 is a high pure aluminum powder that has a pigment content of 73±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| LITHOPONE BT-IN600 | BioTio Group | LITHOPONE BT-IN600 is a white powder with a zinc sulfide content of ≥28% and a pH value of 7.2. This product is most commonly used in printing inks, marking paints, and coating applications. | |
| Precipitated Barium Sulfate BT-IN601 | BioTio Group | Precipitated Barium Sulfate BT-IN601 is a white powder with a barium sulfate content of 98% and a maximum whiteness of 93. This product is most commonly used as a filler in printing ink, paint, surface coating, coated art paper, and dye applications. | |
| Sodium Alginate BT-IN607 | BioTio Group | Sodium Alginate BT-IN607 is a 40-mesh sized, light yellow powder that has a pH value of 6.0-7.0. This product is most commonly used as a thickener in reactive dyestuff, textile screen-printing, and carpet jet-printing applications. | |
| Titanium Dioxide Anatase BT-A11 | BioTio Group | Titanium Dioxide Anatase BT-A11 is a white powder that has a titanium dioxide content of ≤93% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, emulsion paints, and printing ink applications. | |
| Titanium Dioxide Anatase BT-A113 | BioTio Group | Titanium Dioxide Anatase BT-A113 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, emulsion paints, and printing ink applications. | |
| Titanium Dioxide Anatase BT-A114 | BioTio Group | Titanium Dioxide Anatase BT-A114 is a white powder that has a titanium dioxide content of ≥98% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, emulsion paints, and printing ink applications. | |
| Titanium Dioxide Rutile BT-R22 | BioTio Group | Titanium Dioxide Rutile BT-R22 is a white powder that has a titanium dioxide content of ≤90% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink appl...展開 Titanium Dioxide Rutile BT-R22 is a white powder that has a titanium dioxide content of ≤90% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink applications. 收起 | |
| Titanium Dioxide Rutile BT-R225 | BioTio Group | Titanium Dioxide Rutile BT-R225 is a white powder that has a titanium dioxide content of ≥93% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink app...展開 Titanium Dioxide Rutile BT-R225 is a white powder that has a titanium dioxide content of ≥93% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink applications. 收起 | |
| Titanium Dioxide Rutile BT-R226 | BioTio Group | Titanium Dioxide Rutile BT-R226 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.0-8.5. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink app...展開 Titanium Dioxide Rutile BT-R226 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.0-8.5. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink applications. 收起 | |
| Contract Manufacturing | J. Rettenmaier & Söhne GmbH & Co. KG | JRS offers partnership in market-driven, flexible assistance contract manufacturing. Special tasks with particular requirements can also be implemented by JRS thanks to modular, adaptable plant and machinery. Tests with new products within the scope of pi...展開 JRS offers partnership in market-driven, flexible assistance contract manufacturing. Special tasks with particular requirements can also be implemented by JRS thanks to modular, adaptable plant and machinery. Tests with new products within the scope of pilot projects can be implemented with various contract manufacturing partners. JRS offers the adjustment of dosage forms for different materials e.g. plastic. Experienced application know-how is coupled with a broad range of mechanical process engineering: Fine milling, cryogen milling, fractionation, compacting, mixing, homogenizing, sieving, agglomeration, pelletizing, granulation, air classification, coating and drying. The range of the mechanical process engineering is supplemented by different additional modifications and services, like encapsulation, colouring and retarding As a systems and technology partner, JRS offers contract manufacturing for individual customer needs at German sites in Pattensen and Rosenberg. Furthermore sites in the global production network are also available. 收起 |
