| 2,4,6-Trimethylbenzoyldiphenyl Phosphine Oxide | Yan Tai Heng Nuo Chemical Technology Co., Ltd. | 2,4,6-Trimethylbenzoyldiphenyl Phosphine Oxide, in the form of a light yellow solid, is a photo-initiator. This product can be used in solvent-based printing inks, particularly lithographic and flexogravure printing inks, and in wood coatings. Its melti...展開 2,4,6-Trimethylbenzoyldiphenyl Phosphine Oxide, in the form of a light yellow solid, is a photo-initiator. This product can be used in solvent-based printing inks, particularly lithographic and flexogravure printing inks, and in wood coatings. Its melting point lies between 91-94 degrees Celsius. 收起 | |
| Chromic Acid | Yan Tai Heng Nuo Chemical Technology Co., Ltd. | Chromic Acid, in the form of dark red flakes, is a raw material. This product can be used in printing applications. Its density is 2.7 g/cm3 and its assay is greater than or equal to 99.85%. | |
| Chromium Oxide | Yan Tai Heng Nuo Chemical Technology Co., Ltd. | Chromium Oxide, in the form of a green crystalline powder with a metallic luster, is a mineral. This product can be used as a colorant in paints, in sun-proof coatings, and in currency printing applications. Its density is 5.22 g/cm3 and its melting poi...展開 Chromium Oxide, in the form of a green crystalline powder with a metallic luster, is a mineral. This product can be used as a colorant in paints, in sun-proof coatings, and in currency printing applications. Its density is 5.22 g/cm3 and its melting point is 2435 degrees Celsius. 收起 | |
| EXOCOAT™ AM | Axcentive Sarl | EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down v...展開 EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down viruses and bacteria. It eradicates viruses such as influenza, SARS-COV-2, dengue & hepatitis and bacteria such as E. coli, MSRA, streptococcus, listeria, pneumonia, and salmonella. It is activated by light and displays quick drying at room temperature. Spray application is recommended to reach thin monolayers. It exhibits curing at room temperature up to 300°C and super hard particles (1GPa Vickers). It is easy to apply & durable, allowing longer disinfection intervals while preserving hygiene level. It shows non-silver leaching, efficacious even under low light conditions, lower service frequency, and no need for frequent disinfection routine. It is used in the state-of-the-art continuous antimicrobial coating for high-traffic areas. EXOCOAT® AM is suitable for topcoats for any surface inside buildings, stores, hospitals, and vehicles. The shelf life of this product is 9 months. 收起 | |
| Isostearyl Alcohol | Yan Tai Heng Nuo Chemical Technology Co., Ltd. | Isostearyl Alcohol, in the form of a clear yellow liquid, is a fatty alcohol. This product can be used in printing inks. Its density is 0.8124 g/cm3 and its cloud point lies below -15 degrees Celsius. | |
| Ketjenflex® 12 | Axcentive Sarl | Ketjenflex® 12 is a citrate based clear liquid. It is used as a partially bio-based plasticizer for inks, adhesives, and coatings. Ketjenflex® 12 can be used in vinyl formulations such as PVC plastics, vinyl flooring, solution vinyl resins, wood vinyl com...展開 Ketjenflex® 12 is a citrate based clear liquid. It is used as a partially bio-based plasticizer for inks, adhesives, and coatings. Ketjenflex® 12 can be used in vinyl formulations such as PVC plastics, vinyl flooring, solution vinyl resins, wood vinyl compounds, and PVC based plastisols. It can also be used in PVC based polymers, nitrocellulose resins, and cyanoacrylate adhesives. 收起 | |
| Ketjenflex® 6 | Axcentive Sarl | Ketjenflex® 6 is a toluene sulfonamide in the form of a white crystalline powder. It is used as a plasticizer in inks, adhesives, and coatings. Ketjenflex® 6 can be used with resins such as nitrocellulose, polyamide, PVAC, rosin, epoxy, and more. | |
| Ketjenflex® 8 | Axcentive Sarl | Ketjenflex® 8 is a toluene sulfonamide in the form of a clear, slightly yellow liquid. It is used as a plasticizer and adhesion promoter in inks, adhesives, and coatings. Ketjenflex® 8 can be used with applications such as PVAC, nitrocellulose, powder coa...展開 Ketjenflex® 8 is a toluene sulfonamide in the form of a clear, slightly yellow liquid. It is used as a plasticizer and adhesion promoter in inks, adhesives, and coatings. Ketjenflex® 8 can be used with applications such as PVAC, nitrocellulose, powder coatings, synthetic polyamides, epoxy coatings and adhesives, and more. 收起 | |
| Ketjenflex® CP | Axcentive Sarl | Ketjenflex® CP is a para toluene sulfonic acid in the form of a white crystalline powder. It is used as a strong protonating catalyst. Ketjenflex® CP can be used in acid cured wood coatings. | |
| Ketjenflex® MH | Axcentive Sarl | Ketjenflex® MH is a toluene sulfonamide in the form of a hard, transparent resin. It is used at a plasticizing co-resin in coatings, adhesives, and inks. Ketjenflex® MH can be used in nitrocellulose coatings, epoxy based coatings and adhesives, and printi...展開 Ketjenflex® MH is a toluene sulfonamide in the form of a hard, transparent resin. It is used at a plasticizing co-resin in coatings, adhesives, and inks. Ketjenflex® MH can be used in nitrocellulose coatings, epoxy based coatings and adhesives, and printing inks. 收起 | |
| Ketjenflex® MS 80 | Axcentive Sarl | Ketjenflex® MS 80 is a toluene sulfonamide in the form of a transparent liquid. it is used as a plasticizing co-resin in butyl acetate for coatings, adhesives, and inks. Ketjenflex® MS 80 is the liquid version of Ketjenflex® MH and can easily be poured in...展開 Ketjenflex® MS 80 is a toluene sulfonamide in the form of a transparent liquid. it is used as a plasticizing co-resin in butyl acetate for coatings, adhesives, and inks. Ketjenflex® MS 80 is the liquid version of Ketjenflex® MH and can easily be poured into desired formulations. It has applications in nitrocellulose coatings, cellulose acetate formulations, and printing inks. 收起 | |
| Phenylbis(2,4,6-trimethylbenzoyl)phosphine Oxide | Yan Tai Heng Nuo Chemical Technology Co., Ltd. | Phenylbis(2,4,6-trimethylbenzoyl)phosphine Oxide, in the form of a yellow powder, is a raw material. This product can be used in UV-curable varnish and paint systems, printing inks, and adhesives. Its density is 1.173 g/cm3 and its melting point lies be...展開 Phenylbis(2,4,6-trimethylbenzoyl)phosphine Oxide, in the form of a yellow powder, is a raw material. This product can be used in UV-curable varnish and paint systems, printing inks, and adhesives. Its density is 1.173 g/cm3 and its melting point lies between 131-135 degrees Celsius. 收起 | |
| Trimethylolpropane Triacrylate | Yan Tai Heng Nuo Chemical Technology Co., Ltd. | Trimethylolpropane Triacrylate, in the form of a clear liquid, is an intermediate. This product can be used in UV-curable coatings, printing inks, and adhesives. Its density is 1.089 g/cm3 and its flash point is 165 degrees Celsius. | |
| Trimethylopropanetrimethacylate | Yan Tai Heng Nuo Chemical Technology Co., Ltd. | Trimethylopropanetrimethacylate, in the form of a light yellow liquid, is a co-vulcanizing agent. This product can be used in UV-curable printing ink, coatings, and adhesives. Its density is 1.054 g/cm3 and its flash point is 181.418 degrees Celsius. |
