| EXOCOAT™ AM | Axcentive Sarl | EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down v...展開 EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down viruses and bacteria. It eradicates viruses such as influenza, SARS-COV-2, dengue & hepatitis and bacteria such as E. coli, MSRA, streptococcus, listeria, pneumonia, and salmonella. It is activated by light and displays quick drying at room temperature. Spray application is recommended to reach thin monolayers. It exhibits curing at room temperature up to 300°C and super hard particles (1GPa Vickers). It is easy to apply & durable, allowing longer disinfection intervals while preserving hygiene level. It shows non-silver leaching, efficacious even under low light conditions, lower service frequency, and no need for frequent disinfection routine. It is used in the state-of-the-art continuous antimicrobial coating for high-traffic areas. EXOCOAT® AM is suitable for topcoats for any surface inside buildings, stores, hospitals, and vehicles. The shelf life of this product is 9 months. 收起 | |
| Ketjenflex® 12 | Axcentive Sarl | Ketjenflex® 12 is a citrate based clear liquid. It is used as a partially bio-based plasticizer for inks, adhesives, and coatings. Ketjenflex® 12 can be used in vinyl formulations such as PVC plastics, vinyl flooring, solution vinyl resins, wood vinyl com...展開 Ketjenflex® 12 is a citrate based clear liquid. It is used as a partially bio-based plasticizer for inks, adhesives, and coatings. Ketjenflex® 12 can be used in vinyl formulations such as PVC plastics, vinyl flooring, solution vinyl resins, wood vinyl compounds, and PVC based plastisols. It can also be used in PVC based polymers, nitrocellulose resins, and cyanoacrylate adhesives. 收起 | |
| Ketjenflex® 6 | Axcentive Sarl | Ketjenflex® 6 is a toluene sulfonamide in the form of a white crystalline powder. It is used as a plasticizer in inks, adhesives, and coatings. Ketjenflex® 6 can be used with resins such as nitrocellulose, polyamide, PVAC, rosin, epoxy, and more. | |
| Ketjenflex® 8 | Axcentive Sarl | Ketjenflex® 8 is a toluene sulfonamide in the form of a clear, slightly yellow liquid. It is used as a plasticizer and adhesion promoter in inks, adhesives, and coatings. Ketjenflex® 8 can be used with applications such as PVAC, nitrocellulose, powder coa...展開 Ketjenflex® 8 is a toluene sulfonamide in the form of a clear, slightly yellow liquid. It is used as a plasticizer and adhesion promoter in inks, adhesives, and coatings. Ketjenflex® 8 can be used with applications such as PVAC, nitrocellulose, powder coatings, synthetic polyamides, epoxy coatings and adhesives, and more. 收起 | |
| Ketjenflex® CP | Axcentive Sarl | Ketjenflex® CP is a para toluene sulfonic acid in the form of a white crystalline powder. It is used as a strong protonating catalyst. Ketjenflex® CP can be used in acid cured wood coatings. | |
| Ketjenflex® MH | Axcentive Sarl | Ketjenflex® MH is a toluene sulfonamide in the form of a hard, transparent resin. It is used at a plasticizing co-resin in coatings, adhesives, and inks. Ketjenflex® MH can be used in nitrocellulose coatings, epoxy based coatings and adhesives, and printi...展開 Ketjenflex® MH is a toluene sulfonamide in the form of a hard, transparent resin. It is used at a plasticizing co-resin in coatings, adhesives, and inks. Ketjenflex® MH can be used in nitrocellulose coatings, epoxy based coatings and adhesives, and printing inks. 收起 | |
| Ketjenflex® MS 80 | Axcentive Sarl | Ketjenflex® MS 80 is a toluene sulfonamide in the form of a transparent liquid. it is used as a plasticizing co-resin in butyl acetate for coatings, adhesives, and inks. Ketjenflex® MS 80 is the liquid version of Ketjenflex® MH and can easily be poured in...展開 Ketjenflex® MS 80 is a toluene sulfonamide in the form of a transparent liquid. it is used as a plasticizing co-resin in butyl acetate for coatings, adhesives, and inks. Ketjenflex® MS 80 is the liquid version of Ketjenflex® MH and can easily be poured into desired formulations. It has applications in nitrocellulose coatings, cellulose acetate formulations, and printing inks. 收起 | |
| SG-Ti 503 | Nanjing Shuguang Chemical Group | SG-Ti 503, in the form of a light red clear liquid, is a titanate coupling agent. This product can be used in printing inks, paints, and coatings. It will increase the heat-resistance, chemical resistance, and water-resistance of the end product. | |
| SG-Ti 5105 | Nanjing Shuguang Chemical Group | SG-Ti 5105, in the form of a light red, clear liquid, is a titanate coupling agent. This product can be used in paints and printing inks. A cross-linking reaction could occur between acetylacetonate titanium and reactive groups in substrate, inks, and c...展開 SG-Ti 5105, in the form of a light red, clear liquid, is a titanate coupling agent. This product can be used in paints and printing inks. A cross-linking reaction could occur between acetylacetonate titanium and reactive groups in substrate, inks, and coating materials and a bridge would be formed. This bridging action by the titanate between the resin and the substrate increases the adhesion power of printing inks and paints. It also increases the heat-resistant, chemical resistance, and water-resistance of the end product. 收起 | |
| SG-Ti 595 | Nanjing Shuguang Chemical Group | SG-Ti 595, in the form of a light red, clear liquid, is a titanate coupling agent. With the evaporation of solvents after application of this product, a cross-linking reaction could occur between acetylacetonate titanium and reactive groups in the substr...展開 SG-Ti 595, in the form of a light red, clear liquid, is a titanate coupling agent. With the evaporation of solvents after application of this product, a cross-linking reaction could occur between acetylacetonate titanium and reactive groups in the substrate, ink or coating materials, and a bridge would be formed. This product will increase heat resistance, chemical resistance, and water resistance in the end product. The bridging action described improves the adhesion power of printing inks and paints. 收起 | |
| SG-TnBT | Nanjing Shuguang Chemical Group | SG-TnBT, in the form of a light yellow clear liquid, is a titanate coupling agent. This product can be used in polyester lacquers to prepare high-temperature paints. It can be used in cross-linking reactions to improve the adhesion between an adhesive a...展開 SG-TnBT, in the form of a light yellow clear liquid, is a titanate coupling agent. This product can be used in polyester lacquers to prepare high-temperature paints. It can be used in cross-linking reactions to improve the adhesion between an adhesive and a polymer and to enhance the adhesion of inks to a substrate. 收起 | |
| SG-Zr 802 | Nanjing Shuguang Chemical Group | SG-Zr 802, in the form of a yellowish to brown organic liquid, is a zirconate coupling agent. This product can be used in adhesives and printing inks as a catalyst for cross-linking resins, which improves the binding force and adhesion to the substrate s...展開 SG-Zr 802, in the form of a yellowish to brown organic liquid, is a zirconate coupling agent. This product can be used in adhesives and printing inks as a catalyst for cross-linking resins, which improves the binding force and adhesion to the substrate surface. It can also be used in the electronic industry as a surface treatment for inorganic minerals to improve the dielectric properties of the composites. 收起 | |
| SG-Zr 803 | Nanjing Shuguang Chemical Group | SG-Zr 803, in the form of a colorless to light yellowish, clear to slightly hazy neutral liquid, is a zirconate coupling agent. This product can be used as a cross-linking agent for water borne coatings and printing inks. It will increase the adhesion o...展開 SG-Zr 803, in the form of a colorless to light yellowish, clear to slightly hazy neutral liquid, is a zirconate coupling agent. This product can be used as a cross-linking agent for water borne coatings and printing inks. It will increase the adhesion of the ink to a substrate surface, and provide heat stability, water resistance, chemical resistance, and gloss. 收起 |
