| 99.99% Conductive Shining Flake Silver Powder | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展開 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起 | |
| 99.99% Conductive Silver Powder (Spherical) | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications. | |
| Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
| Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展開 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起 | |
| AGITAN® 100 | Munzing Chemie | AGITAN® 100 is a liquid white blend of hydrophobic silica, alkoxylated compounds and emulsifiers. It has excellent stability and defoaming persistency. It is mainly used in architectural coatings, printing inks and adhesives. | |
| AGITAN® 103 | Munzing Chemie | AGITAN® 103 is a liquid white blend of modified fatty derivatives, alkoxylated compounds and emulsifiers. It has excellent stability and defoaming persistency. It is mainly used in architectural and paper coatings, printing inks and adhesives. | |
| AGITAN® 105 | Munzing Chemie | AGITAN® 105 is a liquid white blend of modified fatty compounds, hydrophobic silica, alkoxylated compounds and emulsifiers. It has excellent stability and defoaming persistency. It is mainly used in architectural coatings, printing inks and adhesives. | |
| AGITAN® 107 | Munzing Chemie | AGITAN® 107 is a liquid white blend of hydrophobic silica and alkoxylated compounds in emulsion form. It has excellent stability and defoaming efficiency. It is mainly used in architectural and paper coatings, printing inks and adhesives. | |
| AGITAN® 109 | Munzing Chemie | AGITAN® 109 is a liquid white blend of hydrophobic silica, alkoxylated compounds and vegetable oils in emulsion form. It has excellent stability and defoaming persistency. It is mainly used in architectural coatings, printing inks and adhesives. | |
| AGITAN® 120 | Munzing Chemie | AGITAN® 120 is a liquid white emulsion of modified fatty compounds, hydrophobic silica, alkoxylated compounds, polysiloxane copolymer and emulsifiers in water. It has excellent stability and defoaming persistency. It is mainly used in architectural coatin...展開 AGITAN® 120 is a liquid white emulsion of modified fatty compounds, hydrophobic silica, alkoxylated compounds, polysiloxane copolymer and emulsifiers in water. It has excellent stability and defoaming persistency. It is mainly used in architectural coatings, printing inks and adhesives. 收起 | |
| AGITAN® 150 | Munzing Chemie | AGITAN® 150 is a liquid white aqueous emulsion of polysiloxane copolymer with hydrophobic silica. It is a polysiloxane emulsion with excellent stability and defoaming persistency. It is mainly used in industrial and wood coatings, printing inks and adhesi...展開 AGITAN® 150 is a liquid white aqueous emulsion of polysiloxane copolymer with hydrophobic silica. It is a polysiloxane emulsion with excellent stability and defoaming persistency. It is mainly used in industrial and wood coatings, printing inks and adhesives. 收起 | |
| AGITAN® 155 | Munzing Chemie | AGITAN® 155 is a liquid white an aqueous emulsion of polysiloxane copolymer with hydrophobic silica. It is a polysiloxane emulsion with excellent stability and defoaming persistency. It is mainly used in industrial and wood coatings, printing inks and adh...展開 AGITAN® 155 is a liquid white an aqueous emulsion of polysiloxane copolymer with hydrophobic silica. It is a polysiloxane emulsion with excellent stability and defoaming persistency. It is mainly used in industrial and wood coatings, printing inks and adhesives. 收起 | |
| AGITAN® 156 | Munzing Chemie | AGITAN® 156 is a liquid white blend of organic modified polysiloxanes and polyglycols emulsified in water. It is a polysiloxane emulsion with excellent stability and defoaming persistency. It is mainly used in industrial and wood coatings, particularly ai...展開 AGITAN® 156 is a liquid white blend of organic modified polysiloxanes and polyglycols emulsified in water. It is a polysiloxane emulsion with excellent stability and defoaming persistency. It is mainly used in industrial and wood coatings, particularly airless, airmix and HVLP applied coatings and parquet lacquers, as well as printing inks and adhesives. 收起 | |
| AGITAN® 160 | Munzing Chemie | AGITAN® 160 is a liquid white aqueous emulsion of polysiloxane copolymer with hydrophobic silica It is a polysiloxane emulsion with excellent stability and defoaming persistency. It is mainly used in industrial, architectural, and wood coatings, as well a...展開 AGITAN® 160 is a liquid white aqueous emulsion of polysiloxane copolymer with hydrophobic silica It is a polysiloxane emulsion with excellent stability and defoaming persistency. It is mainly used in industrial, architectural, and wood coatings, as well as printing inks. 收起 | |
| AGITAN® 271 | Munzing Chemie | AGITAN® 271 is a liquid yellow, opaque blend of vegetable oils and alkoxylated compounds, silica and emulsifiers, nonionic. It has strong stability and efficiency properties and is commonly used in architectural, industrial, and wood coatings, as well as ...展開 AGITAN® 271 is a liquid yellow, opaque blend of vegetable oils and alkoxylated compounds, silica and emulsifiers, nonionic. It has strong stability and efficiency properties and is commonly used in architectural, industrial, and wood coatings, as well as printing inks and adhesives. 收起 | |
| AGITAN® 280 | Munzing Chemie | AGITAN® 280 is a liquid brown, turbid blend of liquid hydrocarbons, hydrophobic silica, synthetic copolymers and nonionic emulsifiers. It is a highly effective and well dispersible defoamer for aqueous emulsion based and water reducible systems. It is com...展開 AGITAN® 280 is a liquid brown, turbid blend of liquid hydrocarbons, hydrophobic silica, synthetic copolymers and nonionic emulsifiers. It is a highly effective and well dispersible defoamer for aqueous emulsion based and water reducible systems. It is commonly used in architectural, industrial, and wood coatings, as well as printing inks and adhesives. 收起 | |
| AGITAN® 281 | Munzing Chemie | AGITAN® 281 is a liquid brown, turbid blend of liquid hydrocarbons, hydrophobic silica, synthetic copolymers and nonionic emulsifiers. It can be effective in clear coats, highly pigmented systems, low viscosity systems and emulsion manufacturing. It is co...展開 AGITAN® 281 is a liquid brown, turbid blend of liquid hydrocarbons, hydrophobic silica, synthetic copolymers and nonionic emulsifiers. It can be effective in clear coats, highly pigmented systems, low viscosity systems and emulsion manufacturing. It is commonly used in architectural, industrial, and wood coatings, as well as printing inks and adhesives. 收起 | |
| AGITAN® 282 | Munzing Chemie | AGITAN® 282 is a liquid brown, turbid blend of liquid hydrocarbons, hydrophobic silica, synthetic copolymers and nonionic emulsifiers. It can be effective in clear coats, non-pigmented systems, low viscosity systems and emulsion manufacturing. It is commo...展開 AGITAN® 282 is a liquid brown, turbid blend of liquid hydrocarbons, hydrophobic silica, synthetic copolymers and nonionic emulsifiers. It can be effective in clear coats, non-pigmented systems, low viscosity systems and emulsion manufacturing. It is commonly used in architectural, industrial, and wood coatings, as well as printing inks and adhesives. 收起 | |
| AGITAN® 295 | Munzing Chemie | AGITAN® 295 is a liquid brown, turbid blend of liquid hydrocarbons, hydrophobic silica, fatty and alkoxylated compounds, and nonionic emulsifiers. It is an effective defoamer for emulsion based and water reducible systems. It is commonly used in architec...展開 AGITAN® 295 is a liquid brown, turbid blend of liquid hydrocarbons, hydrophobic silica, fatty and alkoxylated compounds, and nonionic emulsifiers. It is an effective defoamer for emulsion based and water reducible systems. It is commonly used in architectural, industrial, and wood coatings, as well as printing inks and adhesives. 收起 | |
| AGITAN® 296 | Munzing Chemie | AGITAN® 296 is a liquid yellow, turbid blend of liquid hydrocarbons, hydrophobic silica, fatty and alkoxylated compounds, and nonionic emulsifiers. It is an effective in clear coats and low viscosity systems and is commonly used in industrial coatings and...展開 AGITAN® 296 is a liquid yellow, turbid blend of liquid hydrocarbons, hydrophobic silica, fatty and alkoxylated compounds, and nonionic emulsifiers. It is an effective in clear coats and low viscosity systems and is commonly used in industrial coatings and printing inks. 收起 | |
| AGITAN® 301 | Munzing Chemie | AGITAN® 301 is a liquid yellow, turbid blend of vegetable oils, modified fatty compounds, nonionic emulsifiers with some biodegradable silicone. It is commonly used in printing inks, adhesives, and paper coatings. | |
| AGITAN® 305 | Munzing Chemie | AGITAN® 305 is a liquid light, turbid blend of modified nonionic fatty compounds and hydrophobic silica with white oils of pharmaceutical grade, free of silicone. It is recommended for aqueous emulsion systems, specifically for low odor and non-polluting ...展開 AGITAN® 305 is a liquid light, turbid blend of modified nonionic fatty compounds and hydrophobic silica with white oils of pharmaceutical grade, free of silicone. It is recommended for aqueous emulsion systems, specifically for low odor and non-polluting formulations. It is compatible with all common binders. It is commonly used in wood coatings, printing inks, and adhesives. 收起 | |
| AGITAN® 307 | Munzing Chemie | AGITAN® 307 is a liquid light, turbid blend of modified nonionic fatty compounds and hydrophobic silica with white oils of pharmaceutical grade, free of silicone. It is recommended for aqueous emulsion systems, specifically for low odor and non-polluting ...展開 AGITAN® 307 is a liquid light, turbid blend of modified nonionic fatty compounds and hydrophobic silica with white oils of pharmaceutical grade, free of silicone. It is recommended for aqueous emulsion systems, specifically for low odor and non-polluting formulations. It is compatible with all common binders. It is commonly used in wood and paper coatings, printing inks, and adhesives. 收起 | |
| AGITAN® 315 | Munzing Chemie | AGITAN® 315 is a liquid yellow, turbid blend of modified nonionic fatty compounds, hydrophobic silica and white oils of pharmaceutical grade. It is recommended for aqueous emulsion systems, specifically for low odor formulations. It is compatible with all...展開 AGITAN® 315 is a liquid yellow, turbid blend of modified nonionic fatty compounds, hydrophobic silica and white oils of pharmaceutical grade. It is recommended for aqueous emulsion systems, specifically for low odor formulations. It is compatible with all common binders. It is commonly used in printing inks, adhesives, and architectural, industrial and wood coatings. 收起 | |
| AGITAN® 350 | Munzing Chemie | AGITAN® 350 is a liquid white-yellow, turbid blend of modified fatty and alkoxylated compounds, silica, nonionic. It has a high stability and efficiency. It is commonly used in printing inks, adhesives, and architectural, industrial and wood coatings. | |
| AGITAN® 351 | Munzing Chemie | AGITAN® 351 is a liquid white-yellow, turbid blend of modified fatty and alkoxylated compounds, silica, nonionic. It has a high stability and efficiency. It is commonly used in printing inks, adhesives, and architectural, industrial and wood coatings. | |
| AGITAN® 381 | Munzing Chemie | AGITAN® 381 is a liquid brown, turbid blend of pharmaceutical grade white oils, hydrophobic silica, oxalkylated compounds and nonionic emulsifiers, free of silicone. It is an effective, low-emmision defoamer and is effective in clear coats, pigmented sys...展開 AGITAN® 381 is a liquid brown, turbid blend of pharmaceutical grade white oils, hydrophobic silica, oxalkylated compounds and nonionic emulsifiers, free of silicone. It is an effective, low-emmision defoamer and is effective in clear coats, pigmented systems and low viscosity systems. It is commonly used for adhesives, printing inks, and architectural, industrial, wood and automotive coatings. 收起 | |
| AGITAN® 526 | Munzing Chemie | AGITAN® 526 is a liquid white aqueous emulsion of polysiloxane polymer. It is a polysiloxane emulsion with excellent stability and defoaming persistency. It is commonly used in printing inks, adhesives, and architectural, industrial, and wood coatings. | |
| AGITAN® 527 | Munzing Chemie | AGITAN® 527 is a liquid white blend of polysiloxane and polyoxalkylene that is emulsified in water. It is a polysiloxane emulsion with excellent stability and defoaming persistency. It is commonly used in printing inks, adhesives, and architectural, indus...展開 AGITAN® 527 is a liquid white blend of polysiloxane and polyoxalkylene that is emulsified in water. It is a polysiloxane emulsion with excellent stability and defoaming persistency. It is commonly used in printing inks, adhesives, and architectural, industrial, and wood coatings. 收起 | |
| AGITAN® 650 | Munzing Chemie | AGITAN® 650 is a liquid yellow, turbid blend of pharmaceutical grade hydrocarbons, special waxes and nonionic emulsifiers, silicone-free. It is an emulsifiable defoamer which can be used in pigments. It is commonly used in wood coatings, printing inks, an...展開 AGITAN® 650 is a liquid yellow, turbid blend of pharmaceutical grade hydrocarbons, special waxes and nonionic emulsifiers, silicone-free. It is an emulsifiable defoamer which can be used in pigments. It is commonly used in wood coatings, printing inks, and adhesives. 收起 | |
| AGITAN® 651 | Munzing Chemie | AGITAN® 651 is a liquid yellow, turbid blend of pharmaceutical grade hydrocarbons, special waxes and nonionic emulsifiers, silicone-free. It is a low-emission defoamer which can be used in pigments and low viscosity systems. It is commonly used in wood co...展開 AGITAN® 651 is a liquid yellow, turbid blend of pharmaceutical grade hydrocarbons, special waxes and nonionic emulsifiers, silicone-free. It is a low-emission defoamer which can be used in pigments and low viscosity systems. It is commonly used in wood coatings, printing inks, and adhesives. 收起 | |
| AGITAN® 701 | Munzing Chemie | AGITAN® 701 is a liquid yellow, turbid blend of liquid hydrocarbons, silicones, alkoxylated and modified fatty compounds and nonionic emulsifiers. It is well suited for water reducible systems and aqueous gloss emulsion systems. It is commonly used in adh...展開 AGITAN® 701 is a liquid yellow, turbid blend of liquid hydrocarbons, silicones, alkoxylated and modified fatty compounds and nonionic emulsifiers. It is well suited for water reducible systems and aqueous gloss emulsion systems. It is commonly used in adhesives and printing inks, and wood, architectural and industrial coatings. 收起 | |
| AGITAN® 731 | Munzing Chemie | AGITAN® 731 is a liquid yellow, turbid blend of modified organo polysiloxanes with nonionic alkoxylated compounds. It is an effective siloxane defoamer for aqueous emulsion and water reducible systems. It is commonly used in architectural, industrial and ...展開 AGITAN® 731 is a liquid yellow, turbid blend of modified organo polysiloxanes with nonionic alkoxylated compounds. It is an effective siloxane defoamer for aqueous emulsion and water reducible systems. It is commonly used in architectural, industrial and wood coatings, as well as printing inks and adhesives. 收起 | |
| AGITAN® 760 | Munzing Chemie | AGITAN® 760 is a liquid yellow, turbid blend of modified organo polysiloxanes with nonionic alkoxylated compounds. It is an effective siloxane defoamer for aqueous emulsion and water reducible systems. It is commonly used in architectural, industrial and ...展開 AGITAN® 760 is a liquid yellow, turbid blend of modified organo polysiloxanes with nonionic alkoxylated compounds. It is an effective siloxane defoamer for aqueous emulsion and water reducible systems. It is commonly used in architectural, industrial and wood coatings, as well as printing inks and adhesives. 收起 | |
| AGITAN® 761 | Munzing Chemie | AGITAN® 761 is a liquid yellow, turbid blend of modified organo polysiloxanes with nonionic compounds. It is an effective siloxane defoamer for aqueous emulsion and water reducible systems. It is commonly used in architectural, industrial and wood coating...展開 AGITAN® 761 is a liquid yellow, turbid blend of modified organo polysiloxanes with nonionic compounds. It is an effective siloxane defoamer for aqueous emulsion and water reducible systems. It is commonly used in architectural, industrial and wood coatings, as well as printing inks and adhesives. 收起 | |
| AGITAN® 765 | Munzing Chemie | AGITAN® 765 is a liquid yellow, turbid blend of modified organopolysiloxane, nonionic. It is an effective siloxane defoamer that is ideal for water-based wood coatings. It is commonly used in industrial and wood coatings, as well as printing inks and adhe...展開 AGITAN® 765 is a liquid yellow, turbid blend of modified organopolysiloxane, nonionic. It is an effective siloxane defoamer that is ideal for water-based wood coatings. It is commonly used in industrial and wood coatings, as well as printing inks and adhesives. 收起 | |
| AGITAN® 766 | Munzing Chemie | AGITAN® 766 is a liquid transparent blend of modified organopolysiloxanes with nonionic alkoxylated compounds and hydrophobic silica. It is an effective siloxane defoamer that is ideal for water-based wood coatings. It is commonly used in industrial and w...展開 AGITAN® 766 is a liquid transparent blend of modified organopolysiloxanes with nonionic alkoxylated compounds and hydrophobic silica. It is an effective siloxane defoamer that is ideal for water-based wood coatings. It is commonly used in industrial and wood coatings, as well as printing inks and adhesives. 收起 | |
| AGITAN® 767 | Munzing Chemie | AGITAN® 767 is a liquid transparent blend of modified organopolysiloxanes with nonionic alkoxylated compounds. It is an effective siloxane defoamer that is ideal for water-based wood coatings. It is commonly used in industrial and wood coatings, as well a...展開 AGITAN® 767 is a liquid transparent blend of modified organopolysiloxanes with nonionic alkoxylated compounds. It is an effective siloxane defoamer that is ideal for water-based wood coatings. It is commonly used in industrial and wood coatings, as well as printing inks and adhesives. 收起 | |
| AGITAN® 771 | Munzing Chemie | AGITAN® 771 is a liquid yellowish solution made of siloxane copolymer in dipropylene glycol mono methylether. It is an effective siloxane defoamer with excellent persistency. It is commonly used in general industrial coatings and printing inks. | |
| AGITAN® 80 | Munzing Chemie | AGITAN® 80 is a liquid white blend of hydrophobic silica, alkoxylated compounds and emulsifiers, in emulsion. It is an emulsion with excellent stability and defoaming persistency. It is commonly used in architectural coatings, printing inks and adhesives. | |
| AGITAN® A201 | Munzing Chemie | AGITAN® A201 is a liquid opaque off-white blend of special wax and mineral oil. It is a universal defoamer that is most effective in adhesives applications. It is commonly used in architectural, clear, high gloss and industrial coatings, as well as lamina...展開 AGITAN® A201 is a liquid opaque off-white blend of special wax and mineral oil. It is a universal defoamer that is most effective in adhesives applications. It is commonly used in architectural, clear, high gloss and industrial coatings, as well as laminating, packaging, envelope, wood glue and construction adhesives, and water-based printing inks. 收起 | |
| AGITAN® A203E | Munzing Chemie | AGITAN® A203E is a liquid opaque off-white blend of special wax, hydrophobic silica and mineral oil. It is an oil-based defoamer that is made for printing ink formulations and is also used as a press-side defoamer. It is commonly used for architecutral co...展開 AGITAN® A203E is a liquid opaque off-white blend of special wax, hydrophobic silica and mineral oil. It is an oil-based defoamer that is made for printing ink formulations and is also used as a press-side defoamer. It is commonly used for architecutral coatings, and corrugated, film and foil, press-side, and screen ink printing inks, as well as PSA, laminating, packaging, envelope, labels, and acrylic adhesives. 收起 | |
| AGITAN® A206E | Munzing Chemie | AGITAN® A206E is a liquid opaque off-white blend of hydrophobic silica and mineral oil. It is a defoamer for architectural coatings that provides initial and long-term defoaming persistence in both the letdown and grind phases. It is commonly used in acry...展開 AGITAN® A206E is a liquid opaque off-white blend of hydrophobic silica and mineral oil. It is a defoamer for architectural coatings that provides initial and long-term defoaming persistence in both the letdown and grind phases. It is commonly used in acrylic, EVA, VA, and latex-based adhesives, and industrial water-based and wood coatings, as well as traffic paint. 收起 | |
| AGITAN® A208 | Munzing Chemie | AGITAN® A208 is a liquid hazy amber blend of metallic stearate and mineral oil. It is a universal defoamer that is most effective in adhesive applications and is also efficient in pigment dispersing and defoaming metallic inks. It is commonly used in wood...展開 AGITAN® A208 is a liquid hazy amber blend of metallic stearate and mineral oil. It is a universal defoamer that is most effective in adhesive applications and is also efficient in pigment dispersing and defoaming metallic inks. It is commonly used in wood, industrial water-based and architectural coatings, as well as pigment grinding and metallic printing inks, and wood glue and construction adhesives. 收起 | |
| AGITAN® A209 | Munzing Chemie | AGITAN® A209 is a liquid brown, turbid blend of mineral oil and non-ionic surfactants (APEO-free). It has high efficiency, good versatility, compatibility, and effectiveness over a range of pH and temperature levels. It is commonly used in architectural c...展開 AGITAN® A209 is a liquid brown, turbid blend of mineral oil and non-ionic surfactants (APEO-free). It has high efficiency, good versatility, compatibility, and effectiveness over a range of pH and temperature levels. It is commonly used in architectural coatings and plasters, printing inks, adhesives and paper coatings. 收起 | |
| AGITAN® A210 | Munzing Chemie | AGITAN® A210 is a liquid yellow, turbid blend of mineral oil and non-ionic surfactants (APEO-free). It is a defoamer for common emulsion systems. It has good foaming control, aeration, compatibility and efficiency. It is commonly used in architectural coa...展開 AGITAN® A210 is a liquid yellow, turbid blend of mineral oil and non-ionic surfactants (APEO-free). It is a defoamer for common emulsion systems. It has good foaming control, aeration, compatibility and efficiency. It is commonly used in architectural coatings and plasters, UV printing inks, and adhesives. 收起 | |
| AGITAN® DF 581 B | Munzing Chemie | AGITAN® DF 581 B is a liquid light, turbid blend of light mineral oil and non-ionic surfactants (APEO-free). It is a defoamer for all common emulsion systems and it provides versatility, fast action, and is non-silicone based. It is commonly used in adhes...展開 AGITAN® DF 581 B is a liquid light, turbid blend of light mineral oil and non-ionic surfactants (APEO-free). It is a defoamer for all common emulsion systems and it provides versatility, fast action, and is non-silicone based. It is commonly used in adhesives, architectural coatings and plasters. 收起 | |
| AGITAN® DF 6002 | Munzing Chemie | AGITAN® DF 6002 is a liquid yellow, turbid blend of light mineral oil and non-ionic surfactants (APEO-free). It is a defoamer for all common emulsion systems and it helps to control foaming and aeration, is highly effective at low concentrations, and has ...展開 AGITAN® DF 6002 is a liquid yellow, turbid blend of light mineral oil and non-ionic surfactants (APEO-free). It is a defoamer for all common emulsion systems and it helps to control foaming and aeration, is highly effective at low concentrations, and has long lasting efficiency. It is commonly used in emulsion paints, architectural coatings and plasters. 收起 | |
| AGITAN® DF 6027 | Munzing Chemie | AGITAN® DF 6027 is a liquid yellow, turbid blend of polyethers and non-ionic surfactants (APEO-free). It is a defoamer for all common emulsion systems and mineral oil free, encourages drainage and the collapse of colloid stabilized foams. It is commonly u...展開 AGITAN® DF 6027 is a liquid yellow, turbid blend of polyethers and non-ionic surfactants (APEO-free). It is a defoamer for all common emulsion systems and mineral oil free, encourages drainage and the collapse of colloid stabilized foams. It is commonly used in printing inks and adhesives. 收起 | |
| AGITAN® DF 6029 | Munzing Chemie | AGITAN® DF 6029 is a liquid yellow, turbid blend of polyethers and non ionic surfactants (APEO-free). It is a defoamer for all common emulsion systems and mineral oil free, encourages drainage and the collapse of colloid stabilized foams, and retinas high...展開 AGITAN® DF 6029 is a liquid yellow, turbid blend of polyethers and non ionic surfactants (APEO-free). It is a defoamer for all common emulsion systems and mineral oil free, encourages drainage and the collapse of colloid stabilized foams, and retinas high efficiency. It is commonly used in printing inks and adhesives. 收起 | |
| AGITAN® DF 6120 | Munzing Chemie | AGITAN® DF 6120 is a liquid white emulsion of mineral oil and non-ionic surfactants (APEO-free). It is a defoamer for all common emulsion systems and has foaming and aeration, and has good comparability and efficiency. It is commonly used in architectural...展開 AGITAN® DF 6120 is a liquid white emulsion of mineral oil and non-ionic surfactants (APEO-free). It is a defoamer for all common emulsion systems and has foaming and aeration, and has good comparability and efficiency. It is commonly used in architectural coatings and plasters, as well as adhesives. 收起 | |
| AGITAN® DF 6420 | Munzing Chemie | AGITAN® DF 6420 is a colorless liquid aqueous silicone oil in a mixed solvent system (APEO-free). It is a defoamer for all common emulsion systems and is very versatile, efficient, and provides good dispersion in most organic solvents. It is commonly used...展開 AGITAN® DF 6420 is a colorless liquid aqueous silicone oil in a mixed solvent system (APEO-free). It is a defoamer for all common emulsion systems and is very versatile, efficient, and provides good dispersion in most organic solvents. It is commonly used in adhesives and printing inks. 收起 | |
| AGITAN® DF 6421 | Munzing Chemie | AGITAN® DF 6421 is a liquid colorless silicone oil in a mixed solvent system (APEO-free). It is a defoamer for all common emulsion systems and has good versatility and dispersion in most organic solvents. It is commonly used in adhesives and printing inks...展開 AGITAN® DF 6421 is a liquid colorless silicone oil in a mixed solvent system (APEO-free). It is a defoamer for all common emulsion systems and has good versatility and dispersion in most organic solvents. It is commonly used in adhesives and printing inks. 收起 | |
| AGITAN® DF 6681 | Munzing Chemie | AGITAN® DF 6681 is a liquid yellow-brown, turbid mixture of mineral oil and non-ionic surfactants (APEO-free). It is a defoamer for all common emulsion systems and has good control over foaming and aeration, good compatibility, efficiency and is effective...展開 AGITAN® DF 6681 is a liquid yellow-brown, turbid mixture of mineral oil and non-ionic surfactants (APEO-free). It is a defoamer for all common emulsion systems and has good control over foaming and aeration, good compatibility, efficiency and is effective over a wide range of pH and temperature values. It is commonly used in adhesives, printing inks and industrial and wood coatings. 收起 | |
| AGITAN® DF 681 F | Munzing Chemie | AGITAN® DF 681 F is a liquid yellow, turbid mixture of mineral oil and non ionic surfactants (APEO-free). It is a defoamer for all common emulsion systems and has good foaming control, compatibility, has good efficiency, and is effective over a wide pH ra...展開 AGITAN® DF 681 F is a liquid yellow, turbid mixture of mineral oil and non ionic surfactants (APEO-free). It is a defoamer for all common emulsion systems and has good foaming control, compatibility, has good efficiency, and is effective over a wide pH range. It is commonly used in adhesives, UV printing inks, architectural coatings and plasters. 收起 | |
| AGITAN® DF 691 | Munzing Chemie | AGITAN® DF 691 is a liquid brown, turbid mixture of mineral oil and non ionic surfactants (APEO-free). It is a defoamer for all common emulsion systems and is has good versatility, compatibility, has good efficiency, and is effective over a wide pH range....展開 AGITAN® DF 691 is a liquid brown, turbid mixture of mineral oil and non ionic surfactants (APEO-free). It is a defoamer for all common emulsion systems and is has good versatility, compatibility, has good efficiency, and is effective over a wide pH range. It is commonly used in adhesives, printing inks, and architectural coatings and plasters. 收起 | |
| AGITAN® DF 999 | Munzing Chemie | AGITAN® DF 999 is a liquid yellow, turbid blend of polyethers and non ionic emulsifiers (APEO-free). It is a defoamer that is mineral oil-free, has high efficiency and promotes good drainage and collapse of colloid stabilized foams. It is commonly used in...展開 AGITAN® DF 999 is a liquid yellow, turbid blend of polyethers and non ionic emulsifiers (APEO-free). It is a defoamer that is mineral oil-free, has high efficiency and promotes good drainage and collapse of colloid stabilized foams. It is commonly used in adhesives, printing inks, and paper coatings. 收起 | |
| AGITAN® E 255 | Munzing Chemie | AGITAN® E 255 is a liquid yellow, turbid blend of polyethers and non ionic emulsifiers (APEO-free). It is a defoamer that has excellent stability and persistency. It is commonly used in adhesives, printing inks, and architectural, industrial and wood coat...展開 AGITAN® E 255 is a liquid yellow, turbid blend of polyethers and non ionic emulsifiers (APEO-free). It is a defoamer that has excellent stability and persistency. It is commonly used in adhesives, printing inks, and architectural, industrial and wood coatings. 收起 | |
| AGITAN® E 256 | Munzing Chemie | AGITAN® E 256 is a liquid white, turbid aqueous emulsion of polysiloxane copolymer with hydrophobic silica. It is a defoamer that has excellent stability and persistency. It is commonly used in adhesives, printing inks, and architectural, industrial and w...展開 AGITAN® E 256 is a liquid white, turbid aqueous emulsion of polysiloxane copolymer with hydrophobic silica. It is a defoamer that has excellent stability and persistency. It is commonly used in adhesives, printing inks, and architectural, industrial and wood coatings. 收起 | |
| Alkylsulfonic Acid Ester of Phenol Plasticizer | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC. | |
| Anti-Yellowing Bright Silver YT1202AY | Guangzhou Yortay Fine Chemicals Co., Ltd. | Anti-Yellowing Bright Silver YT1202AY is a new class of super white pearl pigments in a pearlescent snowy white pigment form that offers shine, with a particle diameter of 10-60µm. It differs from the standard silver white range in that it provides specia...展開 Anti-Yellowing Bright Silver YT1202AY is a new class of super white pearl pigments in a pearlescent snowy white pigment form that offers shine, with a particle diameter of 10-60µm. It differs from the standard silver white range in that it provides special chroma properties like transparency, brightness, higher purity, and reflectivity. It is used in car surface and refinished paints, in interior and exterior wall paints as well as gravure, screen and offset inks. 收起 | |
| Anti-Yellowing Fine Silver YT1203AY | Guangzhou Yortay Fine Chemicals Co., Ltd. | Anti-Yellowing Fine Silver YT1203AY is a new class of super white pearl pigments in a pearlescent white crystal and powder form that offers brightness and shine, with a particle diameter of less than 15µm. It differs from the standard silver white range i...展開 Anti-Yellowing Fine Silver YT1203AY is a new class of super white pearl pigments in a pearlescent white crystal and powder form that offers brightness and shine, with a particle diameter of less than 15µm. It differs from the standard silver white range in that it provides special chroma properties like transparency, brightness, higher purity, and reflectivity. It is used in car surface and refinished paints, in interior and exterior wall paints as well as gravure, screen and offset inks. 收起 | |
| Anti-Yellowing Stain Silver YT1222AY | Guangzhou Yortay Fine Chemicals Co., Ltd. | Anti-Yellowing Stain Silver YT1222AY is a new class of super white pearl pigments in a pearlescent white crystal and powder form that offers brightness and shine, with a particle diameter of 5-25µm. It differs from the standard silver white range in that ...展開 Anti-Yellowing Stain Silver YT1222AY is a new class of super white pearl pigments in a pearlescent white crystal and powder form that offers brightness and shine, with a particle diameter of 5-25µm. It differs from the standard silver white range in that it provides special chroma properties like transparency, brightness, higher purity, and reflectivity. It is used in car surface and refinished paints, in interior and exterior wall paints as well as gravure, screen and offset inks. 收起 | |
| Antique Gold YT93008M | Guangzhou Yortay Fine Chemicals Co., Ltd. | Antique Gold YT93008M is a newly-developed magnetic, conductive pearl pigment that has a particle diameter of 10-60µm and is also called a 3D effect, magnetic pearl pigment. The pigment however, does not have magnetic properties. It can be used in automob...展開 Antique Gold YT93008M is a newly-developed magnetic, conductive pearl pigment that has a particle diameter of 10-60µm and is also called a 3D effect, magnetic pearl pigment. The pigment however, does not have magnetic properties. It can be used in automobile and refinished paints, on exterior and interior wall paints as well as gravure, screen and offset inks. 收起 | |
| Apple Green YT3435 | Guangzhou Yortay Fine Chemicals Co., Ltd. | Apple Green YT3435 has a particle diameter of 10-60µmis and is characterized by a colorful and bright pearl luster. It is a recolored pearlescent pigment that is formed when metallic, silver white and interference pigments become coated with absorptive pi...展開 Apple Green YT3435 has a particle diameter of 10-60µmis and is characterized by a colorful and bright pearl luster. It is a recolored pearlescent pigment that is formed when metallic, silver white and interference pigments become coated with absorptive pigments. They provide brighter coloring and a higher chrome pearlescent effect. Applications for pigments within this range include automobile and refinished paints, interior and exterior wall paints as well as gravure, screen and offset inks. 收起 | |
| Black Gold YT93026M | Guangzhou Yortay Fine Chemicals Co., Ltd. | Black Gold YT93026M has a particle diameter of 10-60µm, with a black gold color in a newly-developed magnetic, conductive pearl pigment that is also called a 3D effect, magnetic pearl pigment. However, it does not have magnetic properties. The pigment can...展開 Black Gold YT93026M has a particle diameter of 10-60µm, with a black gold color in a newly-developed magnetic, conductive pearl pigment that is also called a 3D effect, magnetic pearl pigment. However, it does not have magnetic properties. The pigment can be used in automobile and refinished paints, on exterior and interior wall paints as well as gravure, screen and offset inks. 收起 | |
| Black Pearl YT3404 | Guangzhou Yortay Fine Chemicals Co., Ltd. | Black Pearl YT3404 is a recolored pearlescent pigment with a particle diameter of 10-60µm in a pigment that is characterized by a colorful and bright pearl luster. It is formed when silver white, metallic and interference pigments become coated with absor...展開 Black Pearl YT3404 is a recolored pearlescent pigment with a particle diameter of 10-60µm in a pigment that is characterized by a colorful and bright pearl luster. It is formed when silver white, metallic and interference pigments become coated with absorptive pigments. They provide brighter coloring and a higher chrome pearlescent effect. Applications include automobile and refinished paints, interior and exterior wall paints as well as gravure, screen and offset inks. 收起 | |
| Black Pearl YT3405 | Guangzhou Yortay Fine Chemicals Co., Ltd. | Black Pearl YT3405 displays a particle diameter of 10-60µm and is marked by a bright pearl luster that is also colorful. It is a recolored pearlescent pigment that is formed when metallic, silver white and interference pigments become coated with absorpti...展開 Black Pearl YT3405 displays a particle diameter of 10-60µm and is marked by a bright pearl luster that is also colorful. It is a recolored pearlescent pigment that is formed when metallic, silver white and interference pigments become coated with absorptive pigments. They provide brighter coloring and a higher chrome pearlescent effect. Applications include automobile and refinished paints, interior and exterior wall paints as well as gravure, screen and offset inks. 收起 | |
| Black Stain YT3403 | Guangzhou Yortay Fine Chemicals Co., Ltd. | Black Stain YT3403 falls in the recolored pearlescent pigment range, displaying a particle diameter of 5-25µm in a pigment that is marked by a colorful and bright pearl luster. Pigments within this range are formed when metallic, silver white and interfer...展開 Black Stain YT3403 falls in the recolored pearlescent pigment range, displaying a particle diameter of 5-25µm in a pigment that is marked by a colorful and bright pearl luster. Pigments within this range are formed when metallic, silver white and interference pigments become coated with absorptive pigments. They provide brighter coloring and a higher chrome pearlescent effect. Applications include automobile and refinished paints, interior and exterior wall paints as well as gravure, screen and offset inks. 收起 | |
| Blackish Red YT93010M | Guangzhou Yortay Fine Chemicals Co., Ltd. | Blackish Red YT93010M is a newly-developed magnetic, conductive pearl pigment that has a particle diameter of 10-60µm with a blackish red color in a pigment that is also called a 3D effect, magnetic pearl pigment. The pigment however, does not have magnet...展開 Blackish Red YT93010M is a newly-developed magnetic, conductive pearl pigment that has a particle diameter of 10-60µm with a blackish red color in a pigment that is also called a 3D effect, magnetic pearl pigment. The pigment however, does not have magnetic properties. It can be used in automobile and refinished paints, on exterior and interior wall paints as well as gravure, screen and offset inks. 收起 | |
| Blue Black YT3628 | Guangzhou Yortay Fine Chemicals Co., Ltd. | Blue Black YT3628 displays a particle diameter of 10-60µm in a pigment that is characterized by a colorful and bright pearl luster. This recolored pearlescent pigment is formed when metallic, silver white and interference pigments become coated with absor...展開 Blue Black YT3628 displays a particle diameter of 10-60µm in a pigment that is characterized by a colorful and bright pearl luster. This recolored pearlescent pigment is formed when metallic, silver white and interference pigments become coated with absorptive pigments. They provide brighter coloring and a higher chrome pearlescent effect. Applications for pigments within this range include automobile and refinished paints, interior and exterior wall paints as well as gravure, screen and offset inks. 收起 | |
| Blue Crystal SW6235 | Guangzhou Yortay Fine Chemicals Co., Ltd. | Blue Crystal SW6235 is based on composed material and coated by titanium dioxide, providing a bright blue shine and reflection, an orange transmission, with a particle diameter of 10-60µm. The product can create an attractive crystal flash effect in vario...展開 Blue Crystal SW6235 is based on composed material and coated by titanium dioxide, providing a bright blue shine and reflection, an orange transmission, with a particle diameter of 10-60µm. The product can create an attractive crystal flash effect in various colors. It is used in car surface and refinished paints, in interior and exterior wall paints and in gravure, offset and screen inks. 收起 | |
| Blue Crystal SW6288 | Guangzhou Yortay Fine Chemicals Co., Ltd. | Blue Crystal SW6288 is based on composed material and coated by titanium dioxide, providing a bright blue sparkle, shine, reflection and effect, an orange transmission, with a particle diameter of 40-200µm. The product can create an attractive crystal fla...展開 Blue Crystal SW6288 is based on composed material and coated by titanium dioxide, providing a bright blue sparkle, shine, reflection and effect, an orange transmission, with a particle diameter of 40-200µm. The product can create an attractive crystal flash effect in various colors. It is used in car surface and refinished paints, in interior and exterior wall paints and in gravure, offset and screen inks. 收起 | |
| Blue Crystal SW6289 | Guangzhou Yortay Fine Chemicals Co., Ltd. | Blue Crystal SW6289 is based on composed material and coated by titanium dioxide, providing a bright blue sparkle, shine and reflection, an orange projection, with a particle diameter of 10-125µm. The product can create an attractive crystal flash effect ...展開 Blue Crystal SW6289 is based on composed material and coated by titanium dioxide, providing a bright blue sparkle, shine and reflection, an orange projection, with a particle diameter of 10-125µm. The product can create an attractive crystal flash effect in various colors. It is used in car surface and refinished paints, in interior and exterior wall paints and in gravure, offset and screen inks. 收起 | |
| Blue YT93002M | Guangzhou Yortay Fine Chemicals Co., Ltd. | Blue YT93002M is a newly-developed magnetic, conductive pearl pigment that has a particle diameter of 10-60µm, with a green-colored pigment that has a metallic shine and 3D effect. The pigment is also called a 3D effect, magnetic pearl pigment, but does n...展開 Blue YT93002M is a newly-developed magnetic, conductive pearl pigment that has a particle diameter of 10-60µm, with a green-colored pigment that has a metallic shine and 3D effect. The pigment is also called a 3D effect, magnetic pearl pigment, but does not have magnetic properties. It can be used in automobile and refinished paints, on exterior and interior wall paints as well as gravure, screen and offset inks. 收起 | |
| BLUESIL ACC PA 39 | Elkem Silicones | BLUESIL ACC PA 39 is an additive that reduces the reaction time of those RTV-2 silicone elastomers that cure by a polyaddition reaction. Both the working time (i.e. the time until the product can be processed, also called pot-life or open-time) and the ta...展開 BLUESIL ACC PA 39 is an additive that reduces the reaction time of those RTV-2 silicone elastomers that cure by a polyaddition reaction. Both the working time (i.e. the time until the product can be processed, also called pot-life or open-time) and the tack-free time (i.e. the time to achieve the final elastomeric properties, also called setting or curing time) will be shortened by the addition of BLUESIL ACC PA 39. 收起 | |
| BLUESIL ADD 11013 | Elkem Silicones | BLUESIL ADD 11013 is a polyether-modified polydimethylsiloxane for use in solventless paints and varnishes, and in water-based paints and inks. | |
| BLUESIL ADD PC THIXO | Elkem Silicones | BLUESIL ADD PC THIXO is an additive designed to reduce the flowability of certain RTV- the BLUESIL range. | |
| BLUESIL ADDITIVE PA THIXO | Elkem Silicones | BLUESIL ADD PA THIXO (Thixotropic Additive) is a rheology modifier for RTV-2 silicones that imparts a thixotropic behavior to the silicone. Its high efficiency allows to reach the non-flow condition with a limited amount added. | |
| BLUESIL CA-35 BLUE | Elkem Silicones | BLUESIL CA-35 BLUE is used primarily with BLUESIL V-330 and BLUESIL V-340. It provides variable hardness of curing for these products. BLUESIL V-330 is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It ...展開 BLUESIL CA-35 BLUE is used primarily with BLUESIL V-330 and BLUESIL V-340. It provides variable hardness of curing for these products. BLUESIL V-330 is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, excellent release characteristics, and improved resistance to inhibition. The specific hardness is dependent on which curing agent is used. BLUESIL V-330 is an excellent choice for pattern shop, model shop, and Stereolithography service bureau mold making and tooling applications. 收起 | |
| BLUESIL CA-35 FC | Elkem Silicones | BLUESIL CA-35 FC Catalyst is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, ...展開 BLUESIL CA-35 FC Catalyst is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, excellent release characteristics, and improved resistance to inhibition. The specific hardness is dependent on which curing agent is used. BLUESIL V-330 + FC Catalyst is an excellent choice for pattern shop, model shop, and Stereolithography service bureau mold making and tooling applications. 收起 | |
| BLUESIL CA-45 FC | Elkem Silicones | BLUESIL CA-45 FC Catalyst is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, ...展開 BLUESIL CA-45 FC Catalyst is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, excellent release characteristics, and improved resistance to inhibition. The specific hardness is dependent on which curing agent is used. BLUESIL V-330 + FC Catalyst is an excellent choice for pattern shop, model shop, and Stereolithography service bureau mold making and tooling applications. 收起 | |
| BLUESIL CA-55 FC | Elkem Silicones | BLUESIL CA-55 FC Catalyst is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, ...展開 BLUESIL CA-55 FC Catalyst is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, excellent release characteristics, and improved resistance to inhibition. The specific hardness is dependent on which curing agent is used. BLUESIL V-330 + FC Catalyst is an excellent choice for pattern shop, model shop, and Stereolithography service bureau mold making and tooling applications. 收起 | |
| BLUESIL CATA 24H | Elkem Silicones | BLUESIL CATA 24H is a catalyst that cures at room temperature and leads to a flexible and elastic material BLUESIL RTV 3322. | |
| BLUESIL CATA 6H | Elkem Silicones | BLUESIL CATA 6H is a catalyst that cures at room temperature and leads to a flexible and elastic material BLUESIL RTV 3322. | |
| BLUESIL CATA HI PRO BLUE | Elkem Silicones | BLUESIL CATA HI-PRO BLUE is an organotin carboxylate with additives. It is the standard catalyst for the BLUESIL V-1060 series of moldmaking rubber compounds. BLUESIL CATA HI-PRO BLUE provides deep section cure capability, extremely fast hardness developm...展開 BLUESIL CATA HI-PRO BLUE is an organotin carboxylate with additives. It is the standard catalyst for the BLUESIL V-1060 series of moldmaking rubber compounds. BLUESIL CATA HI-PRO BLUE provides deep section cure capability, extremely fast hardness development and long library life to rubber. 收起 | |
| BLUESIL CATA HI PRO GREEN | Elkem Silicones | BLUESIL CATA HI-PRO GREEN is an organotin carboxylate with additives. It is the standard catalyst for most of the BLUESIL V-1060 and V-1080 series of moldmaking rubber compounds. BLUESIL CATA HI-PRO GREEN provides deep section cure capability, fast hardne...展開 BLUESIL CATA HI-PRO GREEN is an organotin carboxylate with additives. It is the standard catalyst for most of the BLUESIL V-1060 and V-1080 series of moldmaking rubber compounds. BLUESIL CATA HI-PRO GREEN provides deep section cure capability, fast hardness development and long library life to rubber. 收起 | |
| BLUESIL CATA PC THIXO | Elkem Silicones | BLUESIL CATA PC THIXO is a tin salt based activator for Silicon RTV. After addition of 5% of catalyst PC Thixo, the siliconic system –BASE + CATALYST PC becomes more and more elastic, losing its plastic behaviour, and thixotropic. | |
| BLUESIL EMUL 1601 | Elkem Silicones | BLUESIL EMUL 1601 is a general purpose, non-ionic oil in water silicone emulsion of a medium viscosity non-reactive dimethyl polysiloxane. BLUESIL EMUL 1601 may be used alone or as an additive at low levels in other emulsion systems to achieve specific p...展開 BLUESIL EMUL 1601 is a general purpose, non-ionic oil in water silicone emulsion of a medium viscosity non-reactive dimethyl polysiloxane. BLUESIL EMUL 1601 may be used alone or as an additive at low levels in other emulsion systems to achieve specific performance or processing characteristics. 收起 | |
| BLUESIL EMUL 1610 | Elkem Silicones | BLUESIL EMUL 1610 is a general purpose, non-ionic oil in water silicone emulsion of a high viscosity non-reactive dimethyl polysiloxane. BLUESIL EMUL 1610 may be used alone or as an additive at low levels in other emulsion systems to achieve specific per...展開 BLUESIL EMUL 1610 is a general purpose, non-ionic oil in water silicone emulsion of a high viscosity non-reactive dimethyl polysiloxane. BLUESIL EMUL 1610 may be used alone or as an additive at low levels in other emulsion systems to achieve specific performance or processing characteristics. 收起 | |
| BLUESIL EMUL 872RH | Elkem Silicones | BLUESIL EMUL 872RH is a general purpose, non-ionic, aqueous silicone emulsion. | |
| BLUESIL FLD 1658 | Elkem Silicones | BLUESIL FLD 1658 is a methylalkylpolysiloxane which has outstanding lubricating properties and presents a good compatibility with many products other than silicones. | |
| BLUESIL GP-25 | Elkem Silicones | BLUESIL GP 25 is a general purpose, 25DSA, two component, tin catalyzed, room temperature curing silicone elastomer. It is designed as a medium viscosity, medium strength elastomer with good cured rubber properties, long library life and accurate detail r...展開 BLUESIL GP 25 is a general purpose, 25DSA, two component, tin catalyzed, room temperature curing silicone elastomer. It is designed as a medium viscosity, medium strength elastomer with good cured rubber properties, long library life and accurate detail reproduction. 收起 | |
| BLUESIL HI PRO CLEAR | Elkem Silicones | BLUESIL CATA HI-PRO CLEAR is an organotin carboxylate with additives. It is a clear catalyst for most of theBLUESIL V-1060 andV-1080 series of moldmaking rubber compounds.BLUESIL CATA HI-PRO CLEAR provides deep section cure capability, fast hardness devel...展開 BLUESIL CATA HI-PRO CLEAR is an organotin carboxylate with additives. It is a clear catalyst for most of theBLUESIL V-1060 andV-1080 series of moldmaking rubber compounds.BLUESIL CATA HI-PRO CLEAR provides deep section cure capability, fast hardness development and long library life to rubber. 收起 | |
| BLUESIL PC RTRD | Elkem Silicones | BLUESIL PC RTRD is an additive designed to increase the time required to obtain the final properties of condensation curing RTV-2. | |
| BLUESIL PI 2074 | Elkem Silicones | BLUESIL PI 2074 is a cationic photoinitiator for use with epoxy resins, vinyl ethers or any other type of oligomer which polymerises cationically. It is also suited to the formulation of hybrid radical / cationic systems. | |
| BLUESIL PT ACC | Elkem Silicones | BLUESIL PT ACC is an accelerator for platinum cure, polyaddition silicone moldmaking compounds. It can be used with many of Bluestar Silicones addition cure products to customize the de-mold time to as short as 2 hours, allowing multiple molds to be made ...展開 BLUESIL PT ACC is an accelerator for platinum cure, polyaddition silicone moldmaking compounds. It can be used with many of Bluestar Silicones addition cure products to customize the de-mold time to as short as 2 hours, allowing multiple molds to be made each day per master. This can be done without adversely affecting the physical properties of the elastomer. 收起 | |
| BLUESIL RT FOAM 3240 A | Elkem Silicones | BLUESIL RT FOAM 3240 A&B is a two-component silicone foam which cures at room temperature by an addition cure reaction. When the A and B liquid components are thoroughly mixed in 1:1 ratio, the product will expand and cure to a foamed elastomer at room te...展開 BLUESIL RT FOAM 3240 A&B is a two-component silicone foam which cures at room temperature by an addition cure reaction. When the A and B liquid components are thoroughly mixed in 1:1 ratio, the product will expand and cure to a foamed elastomer at room temperature. 收起 | |
| BLUESIL RT FOAM 3241 A | Elkem Silicones | BLUESIL RT FOAM 3241 A&B is a two-component silicone foam which cures at room temperature by an addition cure reaction. When the A and B liquid components are thoroughly mixed in a 1:1 ratio, the product expands and cures to a foamed elastomer at room tem...展開 BLUESIL RT FOAM 3241 A&B is a two-component silicone foam which cures at room temperature by an addition cure reaction. When the A and B liquid components are thoroughly mixed in a 1:1 ratio, the product expands and cures to a foamed elastomer at room temperature. 收起 | |
| BLUESIL RTRD PA 40 | Elkem Silicones | BLUESIL RTRD PA 40 is an additive that increases the reaction time of those RTV-2 silicone elastomers that cure by a polyaddition reaction. Both the working time (i.e. the time until the product can be processed, also called pot-life or open-time) and the...展開 BLUESIL RTRD PA 40 is an additive that increases the reaction time of those RTV-2 silicone elastomers that cure by a polyaddition reaction. Both the working time (i.e. the time until the product can be processed, also called pot-life or open-time) and the tack-free time (i.e. the time to achieve the final elastomeric properties, also called setting or curing time) will be prolonged by the addition of BLUESIL RTRD PA 40. 收起 |
