UL Prospector

成功!

成功保存搜索結果
99.99% Conductive Shining Flake Silver Powder Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展開 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起
99.99% Conductive Silver Powder (Spherical) Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications.
Acetylated Distarch Ddipate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive.
Acetylated Distarch Phosphate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展開 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起
Alkylsulfonic Acid Ester of Phenol Plasticizer Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC.
Antifoam V12 Basildon Chemical Company Ltd. Antifoam V12 is a liquid 100% self emulsifying mineral oil based antifoam agent that is amber in color and translucent. It has good reliability properties and versatility properties. This product is easily dilutable when mixed with water, and is used in p...展開 Antifoam V12 is a liquid 100% self emulsifying mineral oil based antifoam agent that is amber in color and translucent. It has good reliability properties and versatility properties. This product is easily dilutable when mixed with water, and is used in printing inks, paints, glues, paint resins, and adhesives. 收起
BC 403 Basildon Chemical Company Ltd. BC 403 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin...展開 BC 403 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin systems, and provides lubrication and slip properties to a variety of substrates. It has a specific gravity of 1.03. 收起
BC 404 Basildon Chemical Company Ltd. BC 404 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin...展開 BC 404 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin systems, and provides lubrication and slip properties to a variety of substrates. It has a specific gravity of 1.06, and an INCI name of PEG-8 Dimethicone. 收起
BC Antifoam 2226 Basildon Chemical Company Ltd. BC Antifoam 2226 is a clear, colorless, mobile, liquid, antifoam compound concentrate free from silicone polymers. It has good stability properties, and is used in paints, printing inks, and paint resins. This product has a non volatile percentage of 100,...展開 BC Antifoam 2226 is a clear, colorless, mobile, liquid, antifoam compound concentrate free from silicone polymers. It has good stability properties, and is used in paints, printing inks, and paint resins. This product has a non volatile percentage of 100, and a specific gravity of 1.0. 收起
Cardanol Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...展開 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. 收起
Fumed Silica Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....展開 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 收起
H0201 Long Kou Windstar Chemical Co., Ltd. H0201 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0301 Long Kou Windstar Chemical Co., Ltd. H0301 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0601 Long Kou Windstar Chemical Co., Ltd. H0601 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0801 Long Kou Windstar Chemical Co., Ltd. H0801 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0806 Long Kou Windstar Chemical Co., Ltd. H0806 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0901 Long Kou Windstar Chemical Co., Ltd. H0901 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0902 Long Kou Windstar Chemical Co., Ltd. H0902 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0903 Long Kou Windstar Chemical Co., Ltd. H0903 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0904 Long Kou Windstar Chemical Co., Ltd. H0904 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0905 Long Kou Windstar Chemical Co., Ltd. H0905 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0906 Long Kou Windstar Chemical Co., Ltd. H0906 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
Hydroxypropyl Aistarch Phosphate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive.
Methyltriethoxysilane Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silico...展開 Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silicone resins and silicone rubber,silicone resins and silicone rubber. 收起
Methyltrimethoxysilane Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainl...展開 Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainly used as the crosslinking agent of room temperature vulcanized silicone rubber, as well as the glass fiber surface treatment agent and reinforced plastic laminate treatment agent, in order to improve the mechanical strength of products, heat resistance, moisture resistance. 收起
Modified Starch - Compound Active Printing Paste Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological pro...展開 Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起
Modified Starch - High End Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holdi...展開 Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. 收起
Modified Starch - Mid Range Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, ...展開 Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起
ND-22 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 ND-22 is used as cross-linking agent for RTV Silicone Rubber and reinforcing for epoxy fiber glass reinforced plastics, viscosity increaser for synthetic resin and raw stuff fabric racked agent.
Nano Silver Powder TFNP-30 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Nano Silver Powder TFNP-30 is a moderate tap density,high dispersion, spherical nanometer silver powder. TFNP-30 is ideal for low-temperature sintering paste, low silver content and high conductive paste, and touchscreen slurry.
Nano Silver Powder TFNP-80 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Nano Silver Powder TFNP-80 is a moderate tap density, nanoscale spherical monodisperse silver. It is mainly used as an additive material.
PVB Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PV...展開 Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PVB has high transparency, good cold resistance, water resistance, film forming properties and impact resistance, widely used in middle film of glass, ceramic flower paper, metal protective paint, tipping paper, aluminum foil, insulation paint, fiber treatment agent, finished parts, printing inks, dyes and so on. 收起
PVC Paste Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 PVC Paste is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , go...展開 PVC Paste is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , good electrical insulation , thermoplasticity and membrane forming capacity. They are essential materials for preparing PVC compounds. By adding blending agents and employing different techniques, they can be made into rigid or non-rigid PVC products and are suppliable in a wide range of transparent, translucent, and opaque colours. 收起
Precipitated Silica Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixi...展開 Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixing solutions of sodium silicate with sulfuric acid in water. A chemical reaction occurs, and pellets of pure silica form. 收起
SABIC TEA Sabic Europe SABIC TEA is a clear viscous hygroscopic liquid at room temperature with a mild ammonical odor. This product is used in cement/concrete, textile, oil field, electroplating, metal working, coatings, and mining applications.
SABICOL L-2 Sabic Europe SABICOL L-2 is an adduct of naturally derived fatty alcohol C12-14 with two moles of Ethylene Oxide. It is a colorless and odorless liquid. It is efficient water in oil emulsifier and is readily biodegradable. SABICOL L-2 is mainly used as a raw material ...展開 SABICOL L-2 is an adduct of naturally derived fatty alcohol C12-14 with two moles of Ethylene Oxide. It is a colorless and odorless liquid. It is efficient water in oil emulsifier and is readily biodegradable. SABICOL L-2 is mainly used as a raw material in the manufacturing of Lauryl Ether Sulphates for shampoos, shower gels, liquid soaps, dishwashing liquids, and liquid detergents. 收起
SABICOL L-3 Sabic Europe SABICOL L-3 is an adduct of naturally derived fatty alcohol C12-14 with three moles of Ethylene Oxide. It is a versatile non-ionic surfactant. It is a colorless and odorless liquid, is efficient water in oil emulsifier, and is readily biodegradable. This ...展開 SABICOL L-3 is an adduct of naturally derived fatty alcohol C12-14 with three moles of Ethylene Oxide. It is a versatile non-ionic surfactant. It is a colorless and odorless liquid, is efficient water in oil emulsifier, and is readily biodegradable. This product is used in ether sulphates, homecare, detergents, cosmetics, crop protection, metalworking fluids, and paint/coating applications. 收起
SABICOL L-7 Sabic Europe SABICOL L-7 is a adduct of naturally derived fatty alcohol C12-14 with seven moles of Ethylene Oxide. It is a versatile non-ionic surfactant. It is a colorless and odorless liquid, is efficient oil in water emulsifier, and is readily biodegradable. This p...展開 SABICOL L-7 is a adduct of naturally derived fatty alcohol C12-14 with seven moles of Ethylene Oxide. It is a versatile non-ionic surfactant. It is a colorless and odorless liquid, is efficient oil in water emulsifier, and is readily biodegradable. This product is used for homecare, textiles, leather, crop care, metalworking fluids, and paint/coating applications. 收起
SABICOL L-9 Sabic Europe SABICOL L-9 is a adduct of naturally derived fatty alcohol C12-14 with nine moles of Ethylene Oxide. It is a versatile non-ionic surfactant. It is an odorless white paste, is efficient oil in water emulsifier, and is readily biodegradable. This product is...展開 SABICOL L-9 is a adduct of naturally derived fatty alcohol C12-14 with nine moles of Ethylene Oxide. It is a versatile non-ionic surfactant. It is an odorless white paste, is efficient oil in water emulsifier, and is readily biodegradable. This product is used in home care, paint/inks, industrial/institutional cleaning, crop protection, cosmetics/personal care, metalworking fluids, textiles, and leather applications. 收起
SAPEG 200 Sabic Europe SAPEG 200 is a non toxic, non irritant, colorless and odorless liquid. It is used as a humecatant, lubricant, solvent, and viscosity modifier in many applications. It consists of a distribution of polymers of varying molecular weights with an average mole...展開 SAPEG 200 is a non toxic, non irritant, colorless and odorless liquid. It is used as a humecatant, lubricant, solvent, and viscosity modifier in many applications. It consists of a distribution of polymers of varying molecular weights with an average molecular weight of 200. 收起
SAPEG 400 Sabic Europe SAPEG 400 is a colorless and odorless liquid completely miscible in water and many organic solvents. It is non toxic, non irritant and is used as humecatant, lubricant, solvent and viscosity modifier in many applications. This product consists of a distri...展開 SAPEG 400 is a colorless and odorless liquid completely miscible in water and many organic solvents. It is non toxic, non irritant and is used as humecatant, lubricant, solvent and viscosity modifier in many applications. This product consists of a distribution of polymers of varying molecular weights with an average molecular weight of 400. 收起
SAPEG 600 Sabic Europe SAPEG 600 a colorless and odorless liquid, completely miscible in water and many organic solvents. It consists of a distribution of polymers of varying molecular weights with an average molecular weight of 600. This product is non toxic and non irritant a...展開 SAPEG 600 a colorless and odorless liquid, completely miscible in water and many organic solvents. It consists of a distribution of polymers of varying molecular weights with an average molecular weight of 600. This product is non toxic and non irritant and is used as humecatant, lubricant, solvent, and viscosity modifier in many applications. 收起
SCA-Y25E Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of t...展開 SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. SCA-Y25E can be used in a number of applications. 收起
SCA-Y25M Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion o...展開 SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. It can be used in a number of applications. 收起
SILICONE FLUID ATPN-100 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICON...展開 SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-100 is ideal for use in a wide range of applications. 收起
SILICONE FLUID ATPN-1000 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICO...展開 SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-1000 is ideal for use in a wide range of applications. 收起
Silane ATPN-1100 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to ...展開 Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to substrates. The primary amine function reacts with a wide array of thermoset, thermoplastic, and elastomeric materials. 收起
Silane ATPN-1110 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion an...展開 Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion and wet ability of filler in the high molecular materials. ATPN-1110 is an excellent promoter of adhesion and sealant (such as polyurethane, epoxy, and phenol). In the glass wool and FRP products, it can be added into phenol resins to improve the wet resistance and mechanical performance. 收起
Silane ATPN-1120 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of...展開 Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone-polymers or as crosslinker (moisture crosslinking of polymers). The application as“coupling agent”leads in general to an improvement of mechanical and electrical product properties above all under exposure to heat and/or moisture. 收起
Silane Coupling Agent Si-69 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strengt...展開 Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strength, tearing strength and abrasive resistance and reduce compression set of vulcanizates. In addition, it can reduce the viscosity and improve the processability of rubber products. Si-69 is especially suitable to improve the reinforcing properties of fillers that contain hydroxyl groups in all unsaturated polymers having double bonds or their blends. 收起
TOYNOL® D-504 Tianjin Surfychem T&D Co., Ltd. TOYNOL® D-504, in the form of a pale yellow liquid, is a modified acetylenic diol nonionic surfactant. This product can be used as a non-foam wetting agent in water-borne pigments for inkjet inks, water-based pigment pastes, aqueous textile digital print...展開 TOYNOL® D-504, in the form of a pale yellow liquid, is a modified acetylenic diol nonionic surfactant. This product can be used as a non-foam wetting agent in water-borne pigments for inkjet inks, water-based pigment pastes, aqueous textile digital printing inks, water-based coatings, and paper coatings. It is dispersible in water. 收起
TOYNOL® DF-110B Tianjin Surfychem T&D Co., Ltd. TOYNOL® DF-110B, in the form of a clear, pale yellow liquid, is a macromolecular acetylenic diol. This product is a defoamer that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other us...展開 TOYNOL® DF-110B, in the form of a clear, pale yellow liquid, is a macromolecular acetylenic diol. This product is a defoamer that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other uses. It contains 50% active content and its flash point starts above 80℃. 收起
TOYNOL® DF-220 Tianjin Surfychem T&D Co., Ltd. TOYNOL® DF-220, in the form of an emulsion liquid, is a polyether defoamer. This product can be used in water-based adhesives, water-based printing inks, water-based automotive coatings, and paper coatings. It contains 100% active content and is dispers...展開 TOYNOL® DF-220, in the form of an emulsion liquid, is a polyether defoamer. This product can be used in water-based adhesives, water-based printing inks, water-based automotive coatings, and paper coatings. It contains 100% active content and is dispersed in water. 收起
TOYNOL® DF-220M Tianjin Surfychem T&D Co., Ltd. TOYNOL® DF-220M, in the form of an emulsion liquid, is a polyether defoamer. This product can be used in water-based adhesives, water-based printing inks, water-based automotive coatings, and paper coatings. It contains 50% active content and is dispers...展開 TOYNOL® DF-220M, in the form of an emulsion liquid, is a polyether defoamer. This product can be used in water-based adhesives, water-based printing inks, water-based automotive coatings, and paper coatings. It contains 50% active content and is dispersed in water. 收起
TOYNOL® DF-220S Tianjin Surfychem T&D Co., Ltd. TOYNOL® DF-220S, in the form of an emulsion liquid, is a polyether defoamer. This product can be used in water-based adhesives, water-based printing inks, water-based automotive coatings, and paper coatings. It contains 20% active content and is dispers...展開 TOYNOL® DF-220S, in the form of an emulsion liquid, is a polyether defoamer. This product can be used in water-based adhesives, water-based printing inks, water-based automotive coatings, and paper coatings. It contains 20% active content and is dispersed in water. 收起
TOYNOL® DF-58 Tianjin Surfychem T&D Co., Ltd. TOYNOL® DF-58, in the form of a pale yellow liquid, is a mineral oil. This product is a defoamer and foam controlling agent for water-based coatings, adhesives, printing inks, and paper coatings. It is slightly soluble in water and contains 100% active ...展開 TOYNOL® DF-58, in the form of a pale yellow liquid, is a mineral oil. This product is a defoamer and foam controlling agent for water-based coatings, adhesives, printing inks, and paper coatings. It is slightly soluble in water and contains 100% active content. 收起
TOYNOL® DF-58S Tianjin Surfychem T&D Co., Ltd. TOYNOL® DF-58S, in the form of a pale yellow liquid, is a mineral oil. This product is a defoamer and foam controlling agent for water-based coatings, adhesives, printing inks, and paper coatings. It is slightly soluble in water and contains 100% active...展開 TOYNOL® DF-58S, in the form of a pale yellow liquid, is a mineral oil. This product is a defoamer and foam controlling agent for water-based coatings, adhesives, printing inks, and paper coatings. It is slightly soluble in water and contains 100% active content. 收起
TOYNOL® DF-59 Tianjin Surfychem T&D Co., Ltd. TOYNOL® DF-59, in the form of a light-yellow transparent liquid, is an acetylenic diol-modified non-ionic surfactant. This product is a defoamer that can be used in water-based ink and varnishes, aqueous adhesives, water-borne automotive coatings, and pa...展開 TOYNOL® DF-59, in the form of a light-yellow transparent liquid, is an acetylenic diol-modified non-ionic surfactant. This product is a defoamer that can be used in water-based ink and varnishes, aqueous adhesives, water-borne automotive coatings, and paper coatings. This product is dispersible in water. 收起
TOYNOL® DF-70 Tianjin Surfychem T&D Co., Ltd. TOYNOL® DF-70, in the form of a pale yellow liquid, is a modified silicone oil and non-ionic alkynol compound surfactant. This product is a defoamer that can be used in water-based adhesives, water-based ink and varnishes, paper coatings, and water-based...展開 TOYNOL® DF-70, in the form of a pale yellow liquid, is a modified silicone oil and non-ionic alkynol compound surfactant. This product is a defoamer that can be used in water-based adhesives, water-based ink and varnishes, paper coatings, and water-based automotive coatings. It contains 30% active content and is slightly soluble in water. 收起
TOYNOL® DF-72 Tianjin Surfychem T&D Co., Ltd. TOYNOL® DF-72, in the form of a pale yellow liquid, is a modified silicone oil and non-ionic alkynol compound surfactant. This product is a defoamer that can be used in water-based adhesives, water-based ink and varnishes, paper coatings, and water-based...展開 TOYNOL® DF-72, in the form of a pale yellow liquid, is a modified silicone oil and non-ionic alkynol compound surfactant. This product is a defoamer that can be used in water-based adhesives, water-based ink and varnishes, paper coatings, and water-based automotive coatings. It contains 37% active content and is slightly soluble in water. 收起
TOYNOL® DF-80B Tianjin Surfychem T&D Co., Ltd. TOYNOL® DF-80B, in the form of a clear, pale yellow liquid, is a macromolecular acetylenic diol. This product is a defoamer that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other use...展開 TOYNOL® DF-80B, in the form of a clear, pale yellow liquid, is a macromolecular acetylenic diol. This product is a defoamer that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other uses. It contains 32% active content and its flash point starts above 80℃. 收起
TOYNOL® DF-80D Tianjin Surfychem T&D Co., Ltd. TOYNOL® DF-80D, in the form of a clear, pale yellow liquid, is a macromolecular acetylenic diol. This product is a defoamer that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other use...展開 TOYNOL® DF-80D, in the form of a clear, pale yellow liquid, is a macromolecular acetylenic diol. This product is a defoamer that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other uses. It contains 32% active content and its flash point starts above 100℃. 收起
TOYNOL® DF-80L Tianjin Surfychem T&D Co., Ltd. TOYNOL® DF-80L, in the form of a clear, pale yellow liquid, is a macromolecular acetylenic diol. This product is a defoamer that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other use...展開 TOYNOL® DF-80L, in the form of a clear, pale yellow liquid, is a macromolecular acetylenic diol. This product is a defoamer that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other uses. It contains 20% active content and its flash point starts above 100℃. 收起
TOYNOL® DF-80PG Tianjin Surfychem T&D Co., Ltd. TOYNOL® DF-80PG, in the form of a clear, pale yellow liquid, is a macromolecular acetylenic diol. This product is a defoamer that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other us...展開 TOYNOL® DF-80PG, in the form of a clear, pale yellow liquid, is a macromolecular acetylenic diol. This product is a defoamer that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other uses. It contains 50% active content and its flash point starts above 80℃. 收起
TOYNOL® DS-121 Tianjin Surfychem T&D Co., Ltd. TOYNOL® DS-121, in the form of a pale yellow liquid, is a dispersant for grinding pigments. This product is low-foaming and stabilizes color pastes well. It can be used in printing inks, coatings and pigment pastes. Its flash point starts above 100℃.
TOYNOL® DS-136 Tianjin Surfychem T&D Co., Ltd. TOYNOL® DS-136, in the form of a brown liquid, is a dispersant for grinding pigments. This product is low-foaming and stabilizes color pastes well. It can be used in printing inks, coatings and in pigment pastes. Its flash point starts above 100℃.
TOYNOL® FS-204 Tianjin Surfychem T&D Co., Ltd. TOYNOL® FS-204, in the form of a waxy solid, is an acetylenic diol-based nonionic surfactant. This product is a defoaming wetting agent that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, amo...展開 TOYNOL® FS-204, in the form of a waxy solid, is an acetylenic diol-based nonionic surfactant. This product is a defoaming wetting agent that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other uses. It contains 100% active content. 收起
TOYNOL® FS-204A Tianjin Surfychem T&D Co., Ltd. TOYNOL® FS-204A, in the form of a pale yellow liquid, is an acetylenic diol-based nonionic surfactant. This product is a defoaming wetting agent that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coat...展開 TOYNOL® FS-204A, in the form of a pale yellow liquid, is an acetylenic diol-based nonionic surfactant. This product is a defoaming wetting agent that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other uses. It contains 50% active content. 收起
TOYNOL® FS-204BC Tianjin Surfychem T&D Co., Ltd. TOYNOL® FS-204BC, in the form of a pale yellow liquid, is an acetylenic diol-based nonionic surfactant. This product is a defoaming wetting agent that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coa...展開 TOYNOL® FS-204BC, in the form of a pale yellow liquid, is an acetylenic diol-based nonionic surfactant. This product is a defoaming wetting agent that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other uses. It contains 50% active content. 收起
TOYNOL® FS-204DPM Tianjin Surfychem T&D Co., Ltd. TOYNOL® FS-204DPM, in the form of a pale yellow liquid, is an acetylenic diol-based nonionic surfactant. This product is a defoaming wetting agent that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick co...展開 TOYNOL® FS-204DPM, in the form of a pale yellow liquid, is an acetylenic diol-based nonionic surfactant. This product is a defoaming wetting agent that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other uses. It contains 50% active content. 收起
TOYNOL® FS-204E Tianjin Surfychem T&D Co., Ltd. TOYNOL® FS-204E, in the form of a pale yellow liquid, is an acetylenic diol-based nonionic surfactant. This product is a defoaming wetting agent that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coat...展開 TOYNOL® FS-204E, in the form of a pale yellow liquid, is an acetylenic diol-based nonionic surfactant. This product is a defoaming wetting agent that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other uses. It contains 50% active content. 收起
TOYNOL® FS-204PA Tianjin Surfychem T&D Co., Ltd. TOYNOL® FS-204PA, in the form of a pale yellow liquid, is an acetylenic diol-based nonionic surfactant. This product is a defoaming wetting agent that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coa...展開 TOYNOL® FS-204PA, in the form of a pale yellow liquid, is an acetylenic diol-based nonionic surfactant. This product is a defoaming wetting agent that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other uses. It contains 50% active content. 收起
TOYNOL® FS-204PG Tianjin Surfychem T&D Co., Ltd. TOYNOL® FS-204PG, in the form of a pale yellow liquid, is an acetylenic diol-based nonionic surfactant. This product is a defoaming wetting agent that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coa...展開 TOYNOL® FS-204PG, in the form of a pale yellow liquid, is an acetylenic diol-based nonionic surfactant. This product is a defoaming wetting agent that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other uses. It contains 50% active content. 收起
TOYNOL® FS-500 Tianjin Surfychem T&D Co., Ltd. TOYNOL® FS-500, in the form of a pale yellow liquid, is a modified acetylenic diol nonionic surfactant. This product can be used as a non-foam wetting agent in water-borne pigments for inkjet inks, water-based pigment pastes, aqueous textile digital prin...展開 TOYNOL® FS-500, in the form of a pale yellow liquid, is a modified acetylenic diol nonionic surfactant. This product can be used as a non-foam wetting agent in water-borne pigments for inkjet inks, water-based pigment pastes, aqueous textile digital printing inks, water-based coatings, and paper coatings. It is dispersible in water. 收起
TOYNOL® FS-620 Tianjin Surfychem T&D Co., Ltd. TOYNOL® FS-620, in the form of a pale yellow liquid, is a defoaming wetting agent for waterborne systems. This product can be used in waterborne inks, varnishes, adhesives, and automotive or non-stick coatings. It contains 100% active content.
TOYNOL® FS-640 Tianjin Surfychem T&D Co., Ltd. TOYNOL® FS-640, in the form of a pale yellow liquid, is a defoaming wetting agent for waterborne systems. This product can be used in waterborne inks, varnishes, adhesives, and automotive or non-stick coatings. It contains 100% active content.
TOYNOL® FS-6502 Tianjin Surfychem T&D Co., Ltd. TOYNOL® FS-6502, in the form of a pale yellow liquid, is a low-foam wetting agent for waterborne systems. This product can be used in waterborne inks, varnishes, adhesives, and automotive or non-stick coatings. It contains 100% active content.
TOYNOL® FS-660 Tianjin Surfychem T&D Co., Ltd. TOYNOL® FS-660, in the form of a pale yellow liquid, is a low-foam wetting agent for waterborne systems. This product can be used in waterborne inks, varnishes, adhesives, and automotive or non-stick coatings. It contains 100% active content.
TOYNOL® FS-680 Tianjin Surfychem T&D Co., Ltd. TOYNOL® FS-680, in the form of a pale yellow liquid, is a low-foam wetting agent for waterborne systems. This product can be used in waterborne inks, varnishes, adhesives, and automotive or non-stick coatings. It contains 100% active content.
TOYNOL® FS-683 Tianjin Surfychem T&D Co., Ltd. TOYNOL® FS-683, in the form of a pale yellow liquid, is a low-foam wetting agent for waterborne systems. This product can be used in waterborne inks, varnishes, adhesives, and automotive or non-stick coatings. It contains 100% active content.
TOYNOL® S-180 Tianjin Surfychem T&D Co., Ltd. TOYNOL® S-180, in the form of a clear liquid, is a multi-branched alcohol modified surfactant. This product can be used in waterborne inks, water-based varnishes, adhesives, paper coatings, and textile coatings. It contains 63% active content.
TOYNOL® S-182 Tianjin Surfychem T&D Co., Ltd. TOYNOL® S-182, in the form of a clear liquid, is a multi-branched alcohol modified surfactant. This product can be used in waterborne inks, water-based varnishes, adhesives, paper coatings, and textile coatings. It contains 68% active content.
TOYNOL® S-183 Tianjin Surfychem T&D Co., Ltd. TOYNOL® S-183, in the form of a clear liquid, is a multi-branched alcohol modified surfactant. This product can be used in waterborne inks, water-based varnishes, adhesives, paper coatings, and textile coatings. It contains 78% active content.
TOYNOL® S-184 Tianjin Surfychem T&D Co., Ltd. TOYNOL® S-184, in the form of a clear liquid, is a multi-branched alcohol modified surfactant. This product can be used in waterborne inks, water-based varnishes, adhesives, paper coatings, and textile coatings. It contains 80% active content.
TOYNOL® SIF-706 Tianjin Surfychem T&D Co., Ltd. TOYNOL® SIF-706, in the form of a colorless to pale yellow transparent liquid, is a wetting and leveling agent that can be used in paints, coatings, and inks. This product is a rheology modifier that can reduce the system's surface tension and strengthen...展開 TOYNOL® SIF-706, in the form of a colorless to pale yellow transparent liquid, is a wetting and leveling agent that can be used in paints, coatings, and inks. This product is a rheology modifier that can reduce the system's surface tension and strengthen the system of base leveling. It contains 12.5% active content. This product is particularly designed for solvent-based systems, and works acceptably in solvent-free and water-based systems. 收起
TOYNOL® SIF-720 Tianjin Surfychem T&D Co., Ltd. TOYNOL® SIF-720, in the form of a colorless to pale yellow transparent liquid, is a wetting and leveling agent that can be used in paints, coatings, and inks. This product is a rheology modifier that can reduce the system's surface tension and strengthen...展開 TOYNOL® SIF-720, in the form of a colorless to pale yellow transparent liquid, is a wetting and leveling agent that can be used in paints, coatings, and inks. This product is a rheology modifier that can reduce the system's surface tension and strengthen the system of base leveling. It contains 100% active content. This product is particularly designed for solvent-based systems, solvent-free systems, and water-based systems. 收起
TOYNOL® SIF-741 Tianjin Surfychem T&D Co., Ltd. TOYNOL® SIF-741, in the form of a colorless to pale yellow transparent liquid, is a wetting and leveling agent that can be used in paints, coatings, and inks. This product is a rheology modifier that can reduce the system's surface tension and strengthen...展開 TOYNOL® SIF-741, in the form of a colorless to pale yellow transparent liquid, is a wetting and leveling agent that can be used in paints, coatings, and inks. This product is a rheology modifier that can reduce the system's surface tension and strengthen the system of base leveling. It contains 50% active content. This product is particularly designed for solvent-based systems and water-based systems, and works acceptably in solvent-free systems. 收起
TOYNOL® Superwet-190 Tianjin Surfychem T&D Co., Ltd. TOYNOL® Superwet-190, in the form of a pale yellow liquid, is a modified acetylenic diol nonionic surfactant. This product can be used in waterborne inks, water-based coatings, and water-based adhesives. Its flash point starts above 110℃.
TOYNOL® Superwet-320 Tianjin Surfychem T&D Co., Ltd. TOYNOL® Superwet-320, in the form of a pale yellow liquid, is a foam control wetting agent for waterborne systems. This product can be used in waterborne inks, coatings, adhesives, and paper coatings. It is VOC-free.
TOYNOL® Superwet-320E Tianjin Surfychem T&D Co., Ltd. TOYNOL® Superwet-320E, in the form of a pale yellow liquid, is a foam control wetting agent for waterborne systems. This product can be used in waterborne inks, coatings, adhesives, and paper coatings. It is VOC-free.
TOYNOL® Superwet-340 Tianjin Surfychem T&D Co., Ltd. TOYNOL® Superwet-340, in the form of a pale yellow liquid, is a foam control wetting agent for waterborne systems. This product can be used in waterborne inks, coatings, adhesives, and paper coatings. It is VOC-free.
TOYNOL® Superwet-360 Tianjin Surfychem T&D Co., Ltd. TOYNOL® Superwet-360, in the form of a pale yellow liquid, is a foam control wetting agent for waterborne systems. This product can be used in waterborne inks, coatings, adhesives, and paper coatings. It is VOC-free.
UVB2000 Special Tertiary Amine Acrylate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVB2000 Special Tertiary Amine Acrylate is a difunctional amine coinitiator which, when used in conjunction with a photosensitizer such as benzophenone, promotes rapid curing under UV light. Additional benefits include reduced odors, both at press side an...展開 UVB2000 Special Tertiary Amine Acrylate is a difunctional amine coinitiator which, when used in conjunction with a photosensitizer such as benzophenone, promotes rapid curing under UV light. Additional benefits include reduced odors, both at press side and in the cured film, and reduced blooming. It is ideal for use in a wide range of applications. 收起
UVB2200 Reactive Amine Acrylate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVB2200 Reactive Amine Acrylate is a very low viscosity, highly reactive amine modified polyetheracrylate oligomer for use in UV and EB curing systems. UVB2200 can be used as the sole binder or with monomer diluents. It is ideal for use in a wide range of...展開 UVB2200 Reactive Amine Acrylate is a very low viscosity, highly reactive amine modified polyetheracrylate oligomer for use in UV and EB curing systems. UVB2200 can be used as the sole binder or with monomer diluents. It is ideal for use in a wide range of applications. 收起
UVE3216 Modified Epoxy Acrylate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVE3216 Modified Epoxy Acrylate is a high molecular weight, acid modified epoxy acrylate. It blended with 10% tripropylene glycol diacrylate. It allows high gloss, fast cure response, higher flexibility and low shrikage. UVE3216 is ideal for use in a wide...展開 UVE3216 Modified Epoxy Acrylate is a high molecular weight, acid modified epoxy acrylate. It blended with 10% tripropylene glycol diacrylate. It allows high gloss, fast cure response, higher flexibility and low shrikage. UVE3216 is ideal for use in a wide range of applications. 收起
UVU 6451 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVU 6451 is a tetrafunctional aliphatic urethane acrylate oligomer developed for UV/EB-cured coatings and inks. It imparts hardness, very fast cure response, and non-yellowing characteristics to these applications.
UVU6219 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVU6219 is an aliphatic polyester based urethane diacrylate oligomer blended with 20% TPGDA, tripropylene glycol diacrylate. It is a flexible oligomer offering good weatherability, and low skin irritation. UVU6219 is ideal for use in a wide range of appli...展開 UVU6219 is an aliphatic polyester based urethane diacrylate oligomer blended with 20% TPGDA, tripropylene glycol diacrylate. It is a flexible oligomer offering good weatherability, and low skin irritation. UVU6219 is ideal for use in a wide range of applications. 收起
UVU6305 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVU6305 is a trifunctional aliphatic polyester urethane acrylate oligomer developed for use in UV and EB cured inks and coatings. Weatherability, low viscosity, and fast cure are among the key attributes of UVU6305. It is ideal for use in a wide range of ...展開 UVU6305 is a trifunctional aliphatic polyester urethane acrylate oligomer developed for use in UV and EB cured inks and coatings. Weatherability, low viscosity, and fast cure are among the key attributes of UVU6305. It is ideal for use in a wide range of applications. 收起
UVU6609 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVU6609 is a hexafunctional aliphatic urethane acrylate oligomer. It offers low viscosity and good abrasion and heat resistance. UVU6609 is ideal for use in a wide range of applications.
UVU6906 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVU6906 is a multifunctional urethane acrylate oligomer that imparts chemical resistance, fast cure response, weatherability, and abrasion resistance to radiation-cure coatings. It is ideal for use in a wide range of applications.