| 99.99% Conductive Shining Flake Silver Powder | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展開 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起 | |
| 99.99% Conductive Silver Powder (Spherical) | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications. | |
| Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
| Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展開 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起 | |
| Alkylsulfonic Acid Ester of Phenol Plasticizer | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC. | |
| Antifoam V12 | Basildon Chemical Company Ltd. | Antifoam V12 is a liquid 100% self emulsifying mineral oil based antifoam agent that is amber in color and translucent. It has good reliability properties and versatility properties. This product is easily dilutable when mixed with water, and is used in p...展開 Antifoam V12 is a liquid 100% self emulsifying mineral oil based antifoam agent that is amber in color and translucent. It has good reliability properties and versatility properties. This product is easily dilutable when mixed with water, and is used in printing inks, paints, glues, paint resins, and adhesives. 收起 | |
| BC 403 | Basildon Chemical Company Ltd. | BC 403 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin...展開 BC 403 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin systems, and provides lubrication and slip properties to a variety of substrates. It has a specific gravity of 1.03. 收起 | |
| BC 404 | Basildon Chemical Company Ltd. | BC 404 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin...展開 BC 404 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin systems, and provides lubrication and slip properties to a variety of substrates. It has a specific gravity of 1.06, and an INCI name of PEG-8 Dimethicone. 收起 | |
| BC Antifoam 2226 | Basildon Chemical Company Ltd. | BC Antifoam 2226 is a clear, colorless, mobile, liquid, antifoam compound concentrate free from silicone polymers. It has good stability properties, and is used in paints, printing inks, and paint resins. This product has a non volatile percentage of 100,...展開 BC Antifoam 2226 is a clear, colorless, mobile, liquid, antifoam compound concentrate free from silicone polymers. It has good stability properties, and is used in paints, printing inks, and paint resins. This product has a non volatile percentage of 100, and a specific gravity of 1.0. 收起 | |
| Cardanol | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...展開 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. 收起 | |
| Fumed Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....展開 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 收起 | |
| H0201 | Long Kou Windstar Chemical Co., Ltd. | H0201 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0301 | Long Kou Windstar Chemical Co., Ltd. | H0301 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0601 | Long Kou Windstar Chemical Co., Ltd. | H0601 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0801 | Long Kou Windstar Chemical Co., Ltd. | H0801 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0806 | Long Kou Windstar Chemical Co., Ltd. | H0806 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0901 | Long Kou Windstar Chemical Co., Ltd. | H0901 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0902 | Long Kou Windstar Chemical Co., Ltd. | H0902 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0903 | Long Kou Windstar Chemical Co., Ltd. | H0903 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0904 | Long Kou Windstar Chemical Co., Ltd. | H0904 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0905 | Long Kou Windstar Chemical Co., Ltd. | H0905 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0906 | Long Kou Windstar Chemical Co., Ltd. | H0906 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| Hakuenka® CCR-S10 | Shiraishi-Omya GmbH | Hakuenka® CCR-S10 is a precipitated calcium carbonate coated with fatty acids in order to improve the dispersion in organic binders. Hakuenka® CCR-S10 is used to modify and control the rheology of sealants and adhesives when a pronounced shear thinning ch...展開 Hakuenka® CCR-S10 is a precipitated calcium carbonate coated with fatty acids in order to improve the dispersion in organic binders. Hakuenka® CCR-S10 is used to modify and control the rheology of sealants and adhesives when a pronounced shear thinning characteristic is the objective. It promotes high yield values and remarkable flowability of the finished product at the same time. Hakuenka® CCR-S10 improves sag and slump resistance and renders reinforcing properties. In printing inks Hakuenka® CCR-S10 is used as a mineral additive. 收起 | |
| Hakuenka® O | Shiraishi-Omya GmbH | Hakuenka® O is a superior ultra-fine calcium carbonate coated with organic compound. Hakuenka® O has 30nm uniformed ultra-fine particles as the primary particle. These particles are surface treated with rosin acid in order to provide compatible surface mo...展開 Hakuenka® O is a superior ultra-fine calcium carbonate coated with organic compound. Hakuenka® O has 30nm uniformed ultra-fine particles as the primary particle. These particles are surface treated with rosin acid in order to provide compatible surface modification when it is mixed with organic materials or with a vehicle component. Hakuenka® O is mainly used for ink application as an extender pigment for better transparency and gloss. Hakuenka® O is also applied in the rubber industry. The rubber compounds with Hakuenka® O shows better tensile strength, tear strength and flex resistance. 收起 | |
| Hakuenka® T-DD | Shiraishi-Omya GmbH | Hakuenka® T-DD is an ultra-fine calcium carbonate which has 80 nm of particles as the primary particle. These particles are surface coated with rosin acids in order to provide compatible surface modification when it is mixed with vehicle or diluents. Haku...展開 Hakuenka® T-DD is an ultra-fine calcium carbonate which has 80 nm of particles as the primary particle. These particles are surface coated with rosin acids in order to provide compatible surface modification when it is mixed with vehicle or diluents. Hakuenka® T-DD is applied for both ink and paint applications. Hakuenka® T-DD is commonly applied to off-set printing ink and gravure ink for better transparency. 收起 | |
| Hicoat 106 EG | Tridev Resins (India) Pvt. Ltd. | Hicoat 106 EG is a low VOC, milky, opaque liquid overprint varnish, designed for off-line application with roller coater machines. It is used to allow faster press speeds, protect and improve the appearance of the surface of ink graphics on substrates. I...展開 Hicoat 106 EG is a low VOC, milky, opaque liquid overprint varnish, designed for off-line application with roller coater machines. It is used to allow faster press speeds, protect and improve the appearance of the surface of ink graphics on substrates. It finds use in many applications such as book and magazine covers, beverage cartons, detergent and cereal boxes, cosmetics and toy packaging and fast food containers. 收起 | |
| Hicoat 106 HG | Tridev Resins (India) Pvt. Ltd. | Hicoat 106 HG is a low VOC, milky, opaque liquid overprint varnish, designed for off-line application with roller coater machines. It is used to enhance gloss, protect and improve the appearance of the surface of ink graphics on substrates. It finds use ...展開 Hicoat 106 HG is a low VOC, milky, opaque liquid overprint varnish, designed for off-line application with roller coater machines. It is used to enhance gloss, protect and improve the appearance of the surface of ink graphics on substrates. It finds use in many applications such as book and magazine covers, beverage cartons, detergent and cereal boxes, cosmetics and toy packaging and fast food containers. 收起 | |
| Hicoat 106 MG | Tridev Resins (India) Pvt. Ltd. | Hicoat 106 MG is a low VOC, milky, opaque liquid overprint varnish, designed for off-line application with roller coater machines. It is used to protect and improve the appearance of the surface of ink graphics on substrates. It finds use in many applica...展開 Hicoat 106 MG is a low VOC, milky, opaque liquid overprint varnish, designed for off-line application with roller coater machines. It is used to protect and improve the appearance of the surface of ink graphics on substrates. It finds use in many applications such as book and magazine covers, beverage cartons, detergent and cereal boxes, cosmetics and toy packaging and fast food containers. 收起 | |
| Hicoat 107 | Tridev Resins (India) Pvt. Ltd. | Hicoat 107 is a low VOC, milky, opaque liquid overprint varnish, designed for online application by high speed and offset machines through addition via the ink duct. It is used to protect and improve the appearance of the surface of ink graphics on substr...展開 Hicoat 107 is a low VOC, milky, opaque liquid overprint varnish, designed for online application by high speed and offset machines through addition via the ink duct. It is used to protect and improve the appearance of the surface of ink graphics on substrates. It finds use in many applications such as book and magazine covers, beverage cartons, detergent and cereal boxes, cosmetics and toy packaging and fast food containers. 收起 | |
| Hicoat 37 | Tridev Resins (India) Pvt. Ltd. | Hicoat 37 is a nonionic, polyethylene wax emulsion. It can be added to pigmented or clear coatings to provide rub resistance and improve slip, without detracting from gloss or clarity. The high softening point of the wax contributes to heat and block resi...展開 Hicoat 37 is a nonionic, polyethylene wax emulsion. It can be added to pigmented or clear coatings to provide rub resistance and improve slip, without detracting from gloss or clarity. The high softening point of the wax contributes to heat and block resistance. It is highly water dispersible and exhibits good compatibility and stability in aqueous vehicles. It can be used in water-based inks or clear coatings. 收起 | |
| Hicoat 61 | Tridev Resins (India) Pvt. Ltd. | Hicoat 61 is a low molecular weight polyelectrolyte solution based on styrene with good pigment wetting properties, latex compatibility, gloss and low odor. It is also suitable as a modifying resin for Hicoat emulsion polymers, improving resolubility, glo...展開 Hicoat 61 is a low molecular weight polyelectrolyte solution based on styrene with good pigment wetting properties, latex compatibility, gloss and low odor. It is also suitable as a modifying resin for Hicoat emulsion polymers, improving resolubility, gloss and general press performance. 收起 | |
| Hicoat 74 | Tridev Resins (India) Pvt. Ltd. | Hicoat 74 is a soft film-forming polymer used as modifier in overprint varnishes and as a let down vehicle to provide adhesion to film and substrates. It exhibits good pigment wetting and viscosity stability that allows it to be used in the grind stage of...展開 Hicoat 74 is a soft film-forming polymer used as modifier in overprint varnishes and as a let down vehicle to provide adhesion to film and substrates. It exhibits good pigment wetting and viscosity stability that allows it to be used in the grind stage of dry pigment dispersions. It is suitable for printing on films and foils, providing good transfer and printability, good grease and water resistance and ice crinkle resistance. 收起 | |
| Hicoat 77 | Tridev Resins (India) Pvt. Ltd. | Hicoat 77 is a medium styrene acrylic emulsion polymer developed as a let down vehicle for flexographic, gravure inks and overprint varnishes. It is designed for applications requiring high gloss and good grease and water resistance. It is suitable for pr...展開 Hicoat 77 is a medium styrene acrylic emulsion polymer developed as a let down vehicle for flexographic, gravure inks and overprint varnishes. It is designed for applications requiring high gloss and good grease and water resistance. It is suitable for printing applications on paper and board. It is compatible with most water based styrene/acrylate and acrylate polymers designed for flexographic and gravure inks, coatings and offset overprint varnishes. 收起 | |
| Hicoat 89 | Tridev Resins (India) Pvt. Ltd. | Hicoat 89 is a hard styrene acrylic emulsion polymer developed as a let down vehicle for flexographic, gravure inks and overprint varnishes. It was designed for applications requiring good gloss, fast drying times and low odor. It is suitable for printing...展開 Hicoat 89 is a hard styrene acrylic emulsion polymer developed as a let down vehicle for flexographic, gravure inks and overprint varnishes. It was designed for applications requiring good gloss, fast drying times and low odor. It is suitable for printing applications on paper and board media. It is compatible with most water based styrene/acrylate and acrylate polymers designed for flexographic and gravure inks, coatings and offset overprint varnishes. 收起 | |
| HK-100 | Tridev Resins (India) Pvt. Ltd. | HK-100 is a bright granular resin which exhibits good light fastness, neutral reaction and resistance to saponification. It has good solubility, is compatible with shellac, making it suitable for preparation of polishing varnishes and lacquers for the su...展開 HK-100 is a bright granular resin which exhibits good light fastness, neutral reaction and resistance to saponification. It has good solubility, is compatible with shellac, making it suitable for preparation of polishing varnishes and lacquers for the surface treatment of wood. It is also suitable for use in printing inks, ball point pen inks, flexo and gravure Inks, wood primer and surface coatings. 收起 | |
| HK–1000 | Tridev Resins (India) Pvt. Ltd. | HK–1000 is a pearl shaped, granular solid resin which exhibits good light fastness, neutral reaction and resistance to saponification. Due to its high viscosity, high softening range, quick solubility and excellent thixotropic properties, it is suitable f...展開 HK–1000 is a pearl shaped, granular solid resin which exhibits good light fastness, neutral reaction and resistance to saponification. Due to its high viscosity, high softening range, quick solubility and excellent thixotropic properties, it is suitable for ball point pen inks and printing inks. Its good solubility and compatibility with shellac also allows it to be used in the preparation of polishing varnishes and lacquers for the surface treatment of wood. 收起 | |
| HK–1000 (Lumps) | Tridev Resins (India) Pvt. Ltd. | HK–1000 (Lumps) is pale yellow, bright resin which exhibits good light fastness, neutral reaction and resistance to saponification. Due to its high viscosity, high softening range, quick solubility and excellent thixotropic properties, it is suitable for ...展開 HK–1000 (Lumps) is pale yellow, bright resin which exhibits good light fastness, neutral reaction and resistance to saponification. Due to its high viscosity, high softening range, quick solubility and excellent thixotropic properties, it is suitable for ball point pen inks and printing inks. Its good solubility and compatibility with shellac also allows it to be used in the preparation of polishing varnishes and lacquers for the surface treatment of wood. 收起 | |
| HK–300 Pale Yellow Lumps | Tridev Resins (India) Pvt. Ltd. | HK–300 Pale Yellow Lumps is a ketone resin exhibiting good compatibility, solubility and pigment wetting. It has good water resistance, gloss and improves adhesion in flexographic printing inks, lacquers, ball point pen inks, as well as gravure and scree...展開 HK–300 Pale Yellow Lumps is a ketone resin exhibiting good compatibility, solubility and pigment wetting. It has good water resistance, gloss and improves adhesion in flexographic printing inks, lacquers, ball point pen inks, as well as gravure and screen printing inks. 收起 | |
| HK–500 Pale Yellow Lumps | Tridev Resins (India) Pvt. Ltd. | HK–500 Pale Yellow Lumps is a ketone resin with a high hydroxyl value and melting point. It is designed to provide improved heat resistance and better blocking resistance. Its has a high degree of polarity that improves adhesion, pigment wetting and glos...展開 HK–500 Pale Yellow Lumps is a ketone resin with a high hydroxyl value and melting point. It is designed to provide improved heat resistance and better blocking resistance. Its has a high degree of polarity that improves adhesion, pigment wetting and gloss. It can be used in cellulose lacquers, ball point pen inks and surface coatings. 收起 | |
| HK–600 | Tridev Resins (India) Pvt. Ltd. | HK–600 is a pale colored ketonic resin which offers a broad range of compatibility and good aliphatic and plasticizer tolerance. It imparts chemical resistance to coatings, along with improved adhesion, pigment wetting and gloss. The low viscosity and wid...展開 HK–600 is a pale colored ketonic resin which offers a broad range of compatibility and good aliphatic and plasticizer tolerance. It imparts chemical resistance to coatings, along with improved adhesion, pigment wetting and gloss. The low viscosity and wide range of compatibility make it suitable for high solids coatings and inks. 收起 | |
| Homocal-D | Shiraishi-Omya GmbH | Homocal-D is an ultra-fine calcium carbonate which has 80 nm of particles as the primary particle. These particles are surface coated with rosin acids in order to provide compatible surface modification when it is mixed with the vehicle or diluents. Homoc...展開 Homocal-D is an ultra-fine calcium carbonate which has 80 nm of particles as the primary particle. These particles are surface coated with rosin acids in order to provide compatible surface modification when it is mixed with the vehicle or diluents. Homocal-D is commonly applied to paint applications where high concentrate formulation is required. Homocal-D contributes to improve the brushing feature of the paint, it also contributes to create a glossy but smooth paint surface. Homocal-D , in the blend use with TiO2, contributes to improve water resistance, better antialkaline and anti-gasoline properties. 收起 | |
| Hydroxypropyl Aistarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive. | |
| Methyltriethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silico...展開 Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silicone resins and silicone rubber,silicone resins and silicone rubber. 收起 | |
| Methyltrimethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainl...展開 Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainly used as the crosslinking agent of room temperature vulcanized silicone rubber, as well as the glass fiber surface treatment agent and reinforced plastic laminate treatment agent, in order to improve the mechanical strength of products, heat resistance, moisture resistance. 收起 | |
| Modified Starch - Compound Active Printing Paste | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological pro...展開 Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Modified Starch - High End | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holdi...展開 Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. 收起 | |
| Modified Starch - Mid Range | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, ...展開 Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Nano Silver Powder TFNP-30 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Nano Silver Powder TFNP-30 is a moderate tap density,high dispersion, spherical nanometer silver powder. TFNP-30 is ideal for low-temperature sintering paste, low silver content and high conductive paste, and touchscreen slurry. | |
| Nano Silver Powder TFNP-80 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Nano Silver Powder TFNP-80 is a moderate tap density, nanoscale spherical monodisperse silver. It is mainly used as an additive material. | |
| ND-22 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | ND-22 is used as cross-linking agent for RTV Silicone Rubber and reinforcing for epoxy fiber glass reinforced plastics, viscosity increaser for synthetic resin and raw stuff fabric racked agent. | |
| Precipitated Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixi...展開 Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixing solutions of sodium silicate with sulfuric acid in water. A chemical reaction occurs, and pellets of pure silica form. 收起 | |
| PVB | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PV...展開 Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PVB has high transparency, good cold resistance, water resistance, film forming properties and impact resistance, widely used in middle film of glass, ceramic flower paper, metal protective paint, tipping paper, aluminum foil, insulation paint, fiber treatment agent, finished parts, printing inks, dyes and so on. 收起 | |
| PVC Paste | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | PVC Paste is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , go...展開 PVC Paste is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , good electrical insulation , thermoplasticity and membrane forming capacity. They are essential materials for preparing PVC compounds. By adding blending agents and employing different techniques, they can be made into rigid or non-rigid PVC products and are suppliable in a wide range of transparent, translucent, and opaque colours. 收起 | |
| SCA-Y25E | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of t...展開 SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. SCA-Y25E can be used in a number of applications. 收起 | |
| SCA-Y25M | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion o...展開 SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. It can be used in a number of applications. 收起 | |
| Silane ATPN-1100 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to ...展開 Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to substrates. The primary amine function reacts with a wide array of thermoset, thermoplastic, and elastomeric materials. 收起 | |
| Silane ATPN-1110 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion an...展開 Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion and wet ability of filler in the high molecular materials. ATPN-1110 is an excellent promoter of adhesion and sealant (such as polyurethane, epoxy, and phenol). In the glass wool and FRP products, it can be added into phenol resins to improve the wet resistance and mechanical performance. 收起 | |
| Silane ATPN-1120 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of...展開 Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone-polymers or as crosslinker (moisture crosslinking of polymers). The application as“coupling agent”leads in general to an improvement of mechanical and electrical product properties above all under exposure to heat and/or moisture. 收起 | |
| Silane Coupling Agent Si-69 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strengt...展開 Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strength, tearing strength and abrasive resistance and reduce compression set of vulcanizates. In addition, it can reduce the viscosity and improve the processability of rubber products. Si-69 is especially suitable to improve the reinforcing properties of fillers that contain hydroxyl groups in all unsaturated polymers having double bonds or their blends. 收起 | |
| SILICONE FLUID ATPN-100 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICON...展開 SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-100 is ideal for use in a wide range of applications. 收起 | |
| SILICONE FLUID ATPN-1000 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICO...展開 SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-1000 is ideal for use in a wide range of applications. 收起 | |
| TA 10 | Tridev Resins (India) Pvt. Ltd. | TA 10 is an acetylacetone-free, water white to pale yellowish liquid used as a cross-linking agent, catalyst and surface modifying agent. It is very reactive to moist air and is resistant to phenolic antioxidants and less likely to produce more color in ...展開 TA 10 is an acetylacetone-free, water white to pale yellowish liquid used as a cross-linking agent, catalyst and surface modifying agent. It is very reactive to moist air and is resistant to phenolic antioxidants and less likely to produce more color in systems where these antioxidants are present. It exhibits good compatibility with nitrocellulose mediums, polyurethane resins and polyamide resins. It provides good adhesion and heat stability to olefinic substrates, foils, metal, rubber cellophane, polyethylene and other plastics. It is designed for flexo / gravure inks and inks for all types of substrates. 收起 | |
| Tripol 16 LV | Tridev Resins (India) Pvt. Ltd. | Tripol 16 LV is a white, fluffy powdered polyvinyl butyral resin used in formulation of printing inks, wash primers, speciality coatings and adhesives in applications requiring high solids and low viscosity. It is also suitable for use in formulation of p...展開 Tripol 16 LV is a white, fluffy powdered polyvinyl butyral resin used in formulation of printing inks, wash primers, speciality coatings and adhesives in applications requiring high solids and low viscosity. It is also suitable for use in formulation of printing inks for flexible packaging, heat sealing lacquers, two-pack automotive paints and ceramics. 收起 | |
| Tripol 18 LV | Tridev Resins (India) Pvt. Ltd. | Tripol 18 LV is a white, fluffy powdered polyvinyl butyral resin widely used in formulation of printing inks, wash primers, speciality coatings and adhesives. It is also suitable for use in formulation of printing inks for flexible packaging, heat sealing...展開 Tripol 18 LV is a white, fluffy powdered polyvinyl butyral resin widely used in formulation of printing inks, wash primers, speciality coatings and adhesives. It is also suitable for use in formulation of printing inks for flexible packaging, heat sealing lacquers, two-pack automotive paints and ceramics. 收起 | |
| Tripol B-30 MB | Tridev Resins (India) Pvt. Ltd. | Tripol B-30 MB is a white, fluffy powdered polyvinyl butyral resin most widely used in formulation of printing inks, wash primers, speciality coatings and adhesives. It is also suitable for use in formulation of printing inks for flexible packaging, lacqu...展開 Tripol B-30 MB is a white, fluffy powdered polyvinyl butyral resin most widely used in formulation of printing inks, wash primers, speciality coatings and adhesives. It is also suitable for use in formulation of printing inks for flexible packaging, lacquers and ceramics. 收起 | |
| Tripol B-40 MB | Tridev Resins (India) Pvt. Ltd. | Tripol B-40 MB is a white, fluffy powdered polyvinyl butyral resin most widely used in formulation of printing inks, wash primers, speciality coatings and adhesives. It is also suitable for use in formulation of printing inks for flexible packaging, heat ...展開 Tripol B-40 MB is a white, fluffy powdered polyvinyl butyral resin most widely used in formulation of printing inks, wash primers, speciality coatings and adhesives. It is also suitable for use in formulation of printing inks for flexible packaging, heat sealing lacquers, two-pack automotive paints and ceramics. 收起 | |
| Tripol B-60 MB | Tridev Resins (India) Pvt. Ltd. | Tripol B-60 MB is a white, fluffy powdered polyvinyl butyral resin used in formulation of printing inks, wash primers, speciality coatings and adhesives. It is also suitable for use in formulation of printing inks for flexible packaging, lacquers and cera...展開 Tripol B-60 MB is a white, fluffy powdered polyvinyl butyral resin used in formulation of printing inks, wash primers, speciality coatings and adhesives. It is also suitable for use in formulation of printing inks for flexible packaging, lacquers and ceramics. 收起 | |
| UVB2000 Special Tertiary Amine Acrylate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVB2000 Special Tertiary Amine Acrylate is a difunctional amine coinitiator which, when used in conjunction with a photosensitizer such as benzophenone, promotes rapid curing under UV light. Additional benefits include reduced odors, both at press side an...展開 UVB2000 Special Tertiary Amine Acrylate is a difunctional amine coinitiator which, when used in conjunction with a photosensitizer such as benzophenone, promotes rapid curing under UV light. Additional benefits include reduced odors, both at press side and in the cured film, and reduced blooming. It is ideal for use in a wide range of applications. 收起 | |
| UVB2200 Reactive Amine Acrylate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVB2200 Reactive Amine Acrylate is a very low viscosity, highly reactive amine modified polyetheracrylate oligomer for use in UV and EB curing systems. UVB2200 can be used as the sole binder or with monomer diluents. It is ideal for use in a wide range of...展開 UVB2200 Reactive Amine Acrylate is a very low viscosity, highly reactive amine modified polyetheracrylate oligomer for use in UV and EB curing systems. UVB2200 can be used as the sole binder or with monomer diluents. It is ideal for use in a wide range of applications. 收起 | |
| UVE3216 Modified Epoxy Acrylate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVE3216 Modified Epoxy Acrylate is a high molecular weight, acid modified epoxy acrylate. It blended with 10% tripropylene glycol diacrylate. It allows high gloss, fast cure response, higher flexibility and low shrikage. UVE3216 is ideal for use in a wide...展開 UVE3216 Modified Epoxy Acrylate is a high molecular weight, acid modified epoxy acrylate. It blended with 10% tripropylene glycol diacrylate. It allows high gloss, fast cure response, higher flexibility and low shrikage. UVE3216 is ideal for use in a wide range of applications. 收起 | |
| UVU 6451 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVU 6451 is a tetrafunctional aliphatic urethane acrylate oligomer developed for UV/EB-cured coatings and inks. It imparts hardness, very fast cure response, and non-yellowing characteristics to these applications. | |
| UVU6219 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVU6219 is an aliphatic polyester based urethane diacrylate oligomer blended with 20% TPGDA, tripropylene glycol diacrylate. It is a flexible oligomer offering good weatherability, and low skin irritation. UVU6219 is ideal for use in a wide range of appli...展開 UVU6219 is an aliphatic polyester based urethane diacrylate oligomer blended with 20% TPGDA, tripropylene glycol diacrylate. It is a flexible oligomer offering good weatherability, and low skin irritation. UVU6219 is ideal for use in a wide range of applications. 收起 | |
| UVU6305 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVU6305 is a trifunctional aliphatic polyester urethane acrylate oligomer developed for use in UV and EB cured inks and coatings. Weatherability, low viscosity, and fast cure are among the key attributes of UVU6305. It is ideal for use in a wide range of ...展開 UVU6305 is a trifunctional aliphatic polyester urethane acrylate oligomer developed for use in UV and EB cured inks and coatings. Weatherability, low viscosity, and fast cure are among the key attributes of UVU6305. It is ideal for use in a wide range of applications. 收起 | |
| UVU6609 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVU6609 is a hexafunctional aliphatic urethane acrylate oligomer. It offers low viscosity and good abrasion and heat resistance. UVU6609 is ideal for use in a wide range of applications. | |
| UVU6906 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVU6906 is a multifunctional urethane acrylate oligomer that imparts chemical resistance, fast cure response, weatherability, and abrasion resistance to radiation-cure coatings. It is ideal for use in a wide range of applications. |
