| 1,3,5-Tris[(3,3,3-trifluoropropyl)methyl] cyclotrisiloxane FD-1000 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | FD-1000 is a 1,3,5-Trimethyl-1,3,5-tris(3,3,3-trifluoropropyl)cyclotrisiloxane. It is supplied in white crystal form. | |
| (3,3,3 Tri FluoroPropyl) Methyl Di-Methoxy Silane FD-1001 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | FD-1001 is a (3,3,3 tri fluoro propyl) methyl di-methoxy silane. It is supplied as a colorless liquid. | |
| 99.99% Conductive Shining Flake Silver Powder | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展開 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起 | |
| 99.99% Conductive Silver Powder (Spherical) | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications. | |
| Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
| Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展開 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起 | |
| Alkylsulfonic Acid Ester of Phenol Plasticizer | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC. | |
| Aluminate Coupling Agent FD-804 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | FD-804 is an aluminate coupling agent. It can be used in dope and paint, which can increase ground coat adhesive force and storage stability. This product can be used as a coupling agent in resins containing -OH. | |
| Aluminum-iv-acetylacetonate FD-805 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | FD-805 is aluminum-iv-acetylacetonate supplied as a white powder. It can be used in dope and paint, which can increase ground coat adhesive force and storage stability. This product can be used as a coupling agent in some special resins. | |
| AquaFLON® 178G (PTFE / Polyethylene Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | AquaFLON® 178G is PTFE (polytetrafluoroethylene) and polyethylene wax in an aqueous dispersion. AquaFLON® 178G is recommended for water-based inks. | |
| AquaFLON® 50 (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | AquaFLON® 50 is submicron PTFE in an aqueous dispersion. AquaFLON® 50 is recommended for a wide variety of specialty applications in inks such as water-based inkjet formulations. Due to its extremely small particle size, AquaFLON® 50 is most suitable for ...展開 AquaFLON® 50 is submicron PTFE in an aqueous dispersion. AquaFLON® 50 is recommended for a wide variety of specialty applications in inks such as water-based inkjet formulations. Due to its extremely small particle size, AquaFLON® 50 is most suitable for thin film applications. 收起 | |
| AquaFLON® 52 (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | AquaFLON® 52 is PTFE (polytetrafluoroethylene) in a non-ionic aqueous dispersion. AquaFLON® 52 is recommended for flexographic and gravure water-based inks. | |
| AquaFLON® 605 (PTFE / Polyethylene Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | AquaFLON® 605 is PTFE (polytetrafluoroethylene) and spherical polyethylene wax in an aqueous dispersion. AquaFLON® 605 is recommended for a wide variety of specality applications in inks. | |
| AquaFLON® 797 (PTFE / Polyethylene Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | AquaFLON® 797 is PTFE (polytetrafluoroethylene) and polyethylene wax in a non-ionic aqueous dispersion. AquaFLON® 797 is recommended for flexographic and gravure water-based inks. | |
| AquaFLON® MG (PTFE / Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | AquaFLON® MG is PTFE (polytetrafluoroethylene) and carnauba wax in an aqueous dispersion. AquaFLON® MG is recommended for thin film water based compositions like printing inks, and overprint varnishes. | |
| Aquapel (Ink Additive) | Shamrock Technologies, Inc. 三叶科技 | 憎水型添加劑，可控制油墨中的水粘附性。可用於平版印刷油墨 | |
| Aquapel Three (Ink Additive) | Shamrock Technologies, Inc. 三叶科技 | 憎水型添加劑，可控制平版印刷油墨中的水粘附性。由於它的高粘度，它對油墨幾乎沒有稀釋效果 | |
| CeraSPERSE 171 (Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | CeraSPERSE 171 is polyethylene wax compounded in refined linseed oil (VOC-free). CeraSPERSE 171 is recommeneded for use in sheetfed ink. | |
| CeraSPERSE 174 (Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | CeraSPERSE 174 is PTFE (polytetrafluoroethylene) and polyethylene wax compounded in refined linseed oil. CeraSPERSE 174 is recommended for use in sheetfed ink. | |
| CeraSPERSE 442DV (PTFE / Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | CeraSPERSE 442DV is PTFE (dark colored polytetrafluoroethylene) and wax compounded in ink oil. | |
| CeraSPERSE UV 636 (Carnauba Wax UV Dispersion) | Shamrock Technologies, Inc. 三叶科技 | CeraSPERSE UV 636 is carnauba wax dispersed in the UV monomer TRPGDA. | |
| CeraSPERSE UV 691 (Carnauba Wax UV Dispersion) | Shamrock Technologies, Inc. 三叶科技 | 25%氧化聚乙烯蠟乳液，分散於TRPGDA中，用於UV固化油墨和涂料。可提供滑爽度和過渡耐磨性能，並維持原有的光澤和透明度 | |
| FluoroSLIP® 225 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | 低分子量聚乙烯和聚四氟乙烯混合物。用於溶劑型和水性油墨 | |
| FluoroSLIP® 421 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | FluoroSLIP® 421 is a PTFE (polytetrafluoroethylene) and polyethylene wax blend. FluoroSLIP® 421 is recommended for offset inks in water-based, solvent-based and UV systems. | |
| FluoroSLIP® 511 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | 細粒徑的高分子量聚乙烯和聚四氟乙烯混合物，可為配方提供出色的耐磨性和良好的滑爽度。用於膠印、UV和鐵皮印刷油墨和套印清漆 | |
| FluoroSLIP® 515 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | FluoroSLIP® 515 is a PTFE (polytetrafluoroethylene) and polyethylene wax blend. FluoroSLIP® 515 is recommended for offset inks in water-based, solvent-based and UV systems. | |
| FluoroSLIP® 533 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | FluoroSLIP® 533 is a hydrophilic polyethylene wax and PTFE blend where the polyethylene wax shows a uniform melting range peaking at 97°C. FluoroSLIP® 533 is recommended for offset inks in water-based, solvent-based and UV systems. | |
| FluoroSLIP® 605 (PTFE / Polytheylene Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | 高分子量聚乙烯和聚四氟乙烯混合物，可提供較好的耐摩擦，耐磨和抗磨損性能，不提供滑爽度 | |
| FluoroSLIP® 731MG (PTFE / Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | 細微粉化，高熔點蠟合金粉末和聚四氟乙烯混合物。可增加潤滑度、硬度、抗粘連性能和抗磨損以及耐磨性能。應用於溶劑型和水性油墨中 | |
| FluoroSPERSE® 153V (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | 穩定的50%微粉化聚四氟乙烯乳液，用於通用型平版印刷油墨體系。用於熱固平版印刷油墨。可結合聚乙烯提高抗磨損性能 | |
| FluoroSPERSE® 6153V (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | FluoroSPERSE® 6153V is a micronized PTFE (polytetrafluoroethylene) dispersion in a universal lithographic system. FluoroSPERSE® 6153V is recommended for use in offset inks. | |
| FluoroSPERSE® 755 (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | FluoroSPERSE® 755 is a PTFE (polytetrafluoroethylene) dispersion in a universal lithographic system. FluoroSPERSE® 755 is recommended for offset and heat set lithographic inks. | |
| FluoroSPERSE® 7908 (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | FluoroSPERSE® 7908 is a PTFE (polytetrafluoroethylene) micropowder dispersion in a lithographic varnish. | |
| FluoroSPERSE® 8233 (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | FluoroSPERSE® 8233 is a dispersion of polytetrafluoroethylene (PTFE) micropowder in a soya alkyd vehicle. | |
| FluoroSPERSE® 966 (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | FluoroSPERSE® 966 is a PTFE (polytetrafluoroethylene) dispersion in a petrolatum and soya alkyd drying oil. FluoroSPERSE® 966 is recommended for offset and heat set inks. | |
| FluoroSPERSE® UV 808 (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | FluoroSPERSE® UV 808 is a 40% dispesion of PTFE (polytetrafluoroethylene) in TRPGDA monomer. | |
| Fumed Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....展開 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 收起 | |
| Grinding Dispersant FD-6001 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | FD-6001 is a grinding dispersant developed for inorganic pigments and fillers. It helps improve powder fluidity and reduce energy consumption, reduce powder's oil absorption, improve powder dispersion in plastic and rubber products, and improve the surfac...展開 FD-6001 is a grinding dispersant developed for inorganic pigments and fillers. It helps improve powder fluidity and reduce energy consumption, reduce powder's oil absorption, improve powder dispersion in plastic and rubber products, and improve the surface smoothness of downstream products. This product is especially recommended for titanium dioxide, aluminum hydroxide, talc, and calcium carbonate. 收起 | |
| Hydrocer 257 (Polyethylene Wax Disperison) | Shamrock Technologies, Inc. 三叶科技 | 50%水性低分子量聚乙烯蠟乳液。可提供良好的耐摩擦性能和滑爽度 | |
| Hydrocer 357 (Polyethylene Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | 50%水性高分子量聚乙烯蠟乳液。可提供良好的耐摩擦性能和滑爽度 | |
| Hydrocer™ 7112 (Synthetic Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | Hydrocer™ 7112 is a stable, aqueous synthetic wax dispersion. It is recommend for water-based ink and coating systems. | |
| Hydrocer 7206 (Synthetic Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | Hydrocer 7206 is a stable, non-ionic aqueous synthetic wax dispersion. It is recommend for water-based ink and coating systems. | |
| Hydrocer DP-69 (Paraffin Wax Microdispersion) | Shamrock Technologies, Inc. 三叶科技 | 水性50%固體石蠟微粒分散乳液。用於水性油墨和涂料中，可提供良好的表面滑爽度和憎水性。 | |
| Hydrocer EE 95 (Polyethylene Wax Emulsion) | Shamrock Technologies, Inc. 三叶科技 | 陰離子，高密度聚乙烯乳液。可改善水性油墨、涂料和套印清漆的耐磨性能和滑爽度。也可大大改善抗劃傷和耐膠印性能，以及滑動角結果 | |
| Hydrocer EP 91 (Paraffin Wax Emulsion) | Shamrock Technologies, Inc. 三叶科技 | 石蠟的水性乳液。用於水性油墨和涂料中，具有出色的耐水性 | |
| Hydrocer ER 77 (Polypropylene Emulsion) | Shamrock Technologies, Inc. 三叶科技 | 非離子型聚丙烯乳液。推薦作為水性油墨和涂料的防滑劑 | |
| Hydroxypropyl Aistarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive. | |
| Methyltriethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silico...展開 Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silicone resins and silicone rubber,silicone resins and silicone rubber. 收起 | |
| Methyltrimethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainl...展開 Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainly used as the crosslinking agent of room temperature vulcanized silicone rubber, as well as the glass fiber surface treatment agent and reinforced plastic laminate treatment agent, in order to improve the mechanical strength of products, heat resistance, moisture resistance. 收起 | |
| Modified Starch - Compound Active Printing Paste | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological pro...展開 Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Modified Starch - High End | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holdi...展開 Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. 收起 | |
| Modified Starch - Mid Range | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, ...展開 Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Nano Silver Powder TFNP-30 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Nano Silver Powder TFNP-30 is a moderate tap density,high dispersion, spherical nanometer silver powder. TFNP-30 is ideal for low-temperature sintering paste, low silver content and high conductive paste, and touchscreen slurry. | |
| Nano Silver Powder TFNP-80 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Nano Silver Powder TFNP-80 is a moderate tap density, nanoscale spherical monodisperse silver. It is mainly used as an additive material. | |
| ND-22 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | ND-22 is used as cross-linking agent for RTV Silicone Rubber and reinforcing for epoxy fiber glass reinforced plastics, viscosity increaser for synthetic resin and raw stuff fabric racked agent. | |
| Neptune 1-N1 (Polyethylene Wax) | Shamrock Technologies, Inc. 三叶科技 | Neptune 1 N1是一種中等分子量的聚乙烯蠟。具有出色的滑爽性及良好的耐磨損性和耐指甲劃傷性能。在配方中極其穩定，有助於防止消泡劑析出。 | |
| Neptune 1-N5 (Polyethylene Wax) | Shamrock Technologies, Inc. 三叶科技 | Neptune 1-N5 is a water dispersible grade of polyethylene wax showing melting peaks ranging from 93 – 106°C. Neptune 1-N5 is recommended for water based inks. | |
| Neptune 5223 (Polyethylene Wax) | Shamrock Technologies, Inc. 三叶科技 | 氧化聚乙烯蠟。易分散於水性體系中，產生最少的泡沫。用於水性油墨 | |
| Polyether Modified Siloxane FD-408 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | FD-408 is a polyether modified siloxane with low surface tension and good permeability. Due to its excellent spreading and permeability, it can be used as a substrate wetting agent for coatings and water-based inks. This product can also be used as a wett...展開 FD-408 is a polyether modified siloxane with low surface tension and good permeability. Due to its excellent spreading and permeability, it can be used as a substrate wetting agent for coatings and water-based inks. This product can also be used as a wetting agent and leveling agent for water-based polyurethanes. 收起 | |
| PowderTEX 61 (PTFE Powder) | Shamrock Technologies, Inc. 三叶科技 | 高級結晶PTFE，在干混階段加入，隨后擠出。可產生絲光桔皮紋理效果。 | |
| PowderTEX 94 (PTFE Powder) | Shamrock Technologies, Inc. 三叶科技 | 一種純聚四氟乙烯，用作粉末涂料的質地改進劑。即便在低濃度的情況下，也可使涂料呈現一種持續的、均勻的和可重現的低光質地。 | |
| Precipitated Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixi...展開 Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixing solutions of sodium silicate with sulfuric acid in water. A chemical reaction occurs, and pellets of pure silica form. 收起 | |
| PVB | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PV...展開 Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PVB has high transparency, good cold resistance, water resistance, film forming properties and impact resistance, widely used in middle film of glass, ceramic flower paper, metal protective paint, tipping paper, aluminum foil, insulation paint, fiber treatment agent, finished parts, printing inks, dyes and so on. 收起 | |
| PVC Paste | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | PVC Paste is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , go...展開 PVC Paste is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , good electrical insulation , thermoplasticity and membrane forming capacity. They are essential materials for preparing PVC compounds. By adding blending agents and employing different techniques, they can be made into rigid or non-rigid PVC products and are suppliable in a wide range of transparent, translucent, and opaque colours. 收起 | |
| R-8004 Siloxane Masterbatch | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | R-8004 Siloxane Masterbatch is an ultra-high molecular weight siloxane polymer. It offers improved processing fluidity, lubricating property, and demolding ability of plastics to reduce equipment frictional loss and decrease buildup. It also offers enhanc...展開 R-8004 Siloxane Masterbatch is an ultra-high molecular weight siloxane polymer. It offers improved processing fluidity, lubricating property, and demolding ability of plastics to reduce equipment frictional loss and decrease buildup. It also offers enhanced scratch resistance, excellent stability, low mobility, improved fire-retardancy, and increased cable speed. This product is a silicone lubricant which functions as a processing agent in the plastics industry. It can also be used to reduce surface defects for glass fiber reinforced composites. R-8004 has ≥70% siloxane content. 收起 | |
| R-8005 Siloxane Masterbatch | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | R-8005 Siloxane Masterbatch is an ultra-high molecular weight siloxane polymer. It offers improved processing fluidity, lubricating property, and demolding ability of plastics to reduce equipment frictional loss and decrease buildup. It also offers enhanc...展開 R-8005 Siloxane Masterbatch is an ultra-high molecular weight siloxane polymer. It offers improved processing fluidity, lubricating property, and demolding ability of plastics to reduce equipment frictional loss and decrease buildup. It also offers enhanced scratch resistance, excellent stability, low mobility, improved fire-retardancy, and increased cable speed. This product is a silicone lubricant which functions as a processing agent in the plastics industry. It can also be used to reduce surface defects for glass fiber reinforced composites. R-8005 has ≥50% siloxane content. 收起 | |
| R-8012 Masonry Water Repellent | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | R-8012 Masonry Water Repellent is an alkoxy siloxane emulsion. It has great waterproofing ability, high permeability, reduced water absorption of substrate, and excellent coating properties. This product is recommended for water repellent treatments for c...展開 R-8012 Masonry Water Repellent is an alkoxy siloxane emulsion. It has great waterproofing ability, high permeability, reduced water absorption of substrate, and excellent coating properties. This product is recommended for water repellent treatments for concrete, masonry, bricks and tiles, wood, coatings, and gypsum mortar. 收起 | |
| R-8601 Alkyl Modified Polysiloxane | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | R-8601 Alkyl Modified Polysiloxane offers functional reactivity, good surface wetting, and low risk of precipitation. Its benefits also include comprehensive versatility, improved mechanical property of composites, and improved compatibility between inorg...展開 R-8601 Alkyl Modified Polysiloxane offers functional reactivity, good surface wetting, and low risk of precipitation. Its benefits also include comprehensive versatility, improved mechanical property of composites, and improved compatibility between inorganic fillers and polymers. 收起 | |
| S-232-N1 (Carnauba / Polyethylene Wax Alloy) | Shamrock Technologies, Inc. 三叶科技 | S-232-N1 is a carnauba and polyethylene wax alloy showing melting peaks ranging from 84 – 110°C. S-232-N1 is recommended for use in water based inks. | |
| S-256-N1 (Carnauba / Polyethylene Wax Alloy) | Shamrock Technologies, Inc. 三叶科技 | S-256-N1 is a carnauba and polyethylene wax alloy showing melting peaks ranging from 95 – 113°C. S-256-N1 is recommended for use in water based inks. | |
| S-363 (Polyethylene Wax Alloy) | Shamrock Technologies, Inc. 三叶科技 | 微粉化聚丙烯蠟合金，是一種消光劑，並可提供出色的耐磨、抗磨損性能，以及抗金屬印記或指甲劃傷的性能 | |
| S-379-H (Polyethylene Wax) | Shamrock Technologies, Inc. 三叶科技 | 經濟型可直接攪拌添加的蠟，可提供良好的滑爽度和耐摩擦性能。它是一種合成聚乙烯蠟，具有典型的直鏈分子結構。用於液體和漿狀油墨中 | |
| S-379-N8 (Polyethylene Wax) | Shamrock Technologies, Inc. 三叶科技 | S-379-N8 is a polyethylene wax with a DSC peak melt above 100°C and corresponding low onset of melting. | |
| S-381-N1 (Carnauba / Polyethylene Wax Alloy) | Shamrock Technologies, Inc. 三叶科技 | 一種微粉化聚乙烯蠟混合物。可以攪拌到涂料中，產生絲光或無光飾面的效果，並帶有出色的滑爽性和耐磨性。可用作去光劑，提高抗磨光的性能。 | |
| S-381-N5 (Carnauba / Polyethylene Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | S-381-N5 is a carnauba and polyethylene micronized wax blend that has a uniform melting range peaking at 91°C. S-381-N5 is recommended for liquid inks. | |
| S-390-C (Spherical Polyethylene Wax) | Shamrock Technologies, Inc. 三叶科技 | S-390-C is a spherical polyethylene wax with a DSC peak melt above 100°C and corresponding low onset of melting. S-390-C is recommended for liquid and paste inks. | |
| S-394-N1 (Polyethylene Wax) | Shamrock Technologies, Inc. 三叶科技 | 聚乙烯蠟粉末，用於各種油墨和涂料，具有窄的熔融溫度范圍和低溶解度。可用於液體和漿狀油墨 | |
| S-394-N5 (Polyethylene Wax) | Shamrock Technologies, Inc. 三叶科技 | 聚乙烯蠟粉末，用於各種油墨和涂料，具有窄的熔融溫度范圍和低溶解度。可用於液體和漿狀油墨 | |
| S-394-SD4 (Spherical Polyethylene Wax) | Shamrock Technologies, Inc. 三叶科技 | S-394-SD4 is a spherical polyethylene wax with a DSC melt peak above 110°C and good onset of melting. S-394-SD4 is recommended for liquid and paste inks. | |
| S-395-N5 (Polyethylene Wax) | Shamrock Technologies, Inc. 三叶科技 | 結晶聚乙烯，具有高熔點和出色的不溶性。用於溶劑型油墨和套印清漆 | |
| S-395-SP5 (Polyethylene Wax) | Shamrock Technologies, Inc. 三叶科技 | 結晶聚乙烯，具有高熔點和出色的不溶性。用於出版物凹印油墨和其它液體油墨 | |
| S-400-N1 (EBS Wax) | Shamrock Technologies, Inc. 三叶科技 | 酰胺蠟粉末，適合薄膜應用場合。用於溶劑型油墨中 | |
| S-400-N5 (EBS Wax) | Shamrock Technologies, Inc. 三叶科技 | 酰胺蠟粉末，適合薄膜應用場合。用於溶劑型油墨中 | |
| S-400-Q (EBS Wax) | Shamrock Technologies, Inc. 三叶科技 | S-400-Q is a micronized EBS (ethylene bissteramide) wax powder showing melting peaks ranging from 108 – 146°C. S-400-Q is recommended for powder, water-based, solvent-based and UV systems. | |
| S-400-SP5 (EBS Wax) | Shamrock Technologies, Inc. 三叶科技 | 酰胺蠟粉末，適合薄膜應用場合。用於溶劑型油墨中 | |
| S-413 (Polyethylene Wax) | Shamrock Technologies, Inc. 三叶科技 | S-413 is a polyethylene wax showing multiple melting peaks ranging from 107 – 142°C. S-413 is recommended for offset inks. | |
| S-483 (Spherical Polyethylene Wax) | Shamrock Technologies, Inc. 三叶科技 | 高分子量球形聚乙烯蠟。用於溶劑型苯胺和凹印油墨 | |
| S-NAUBA-5021 (Carnauba / Polyethylene Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | S-NAUBA-5021 is a carnauba and polyethylene wax blend showing melting peaks ranging from 84 – 110°C. S-NAUBA-5021 is recommended for paste inks in all aqueous and solvent based systems. | |
| SCA-Y25E | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of t...展開 SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. SCA-Y25E can be used in a number of applications. 收起 | |
| SCA-Y25M | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion o...展開 SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. It can be used in a number of applications. 收起 | |
| Silane ATPN-1100 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to ...展開 Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to substrates. The primary amine function reacts with a wide array of thermoset, thermoplastic, and elastomeric materials. 收起 | |
| Silane ATPN-1110 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion an...展開 Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion and wet ability of filler in the high molecular materials. ATPN-1110 is an excellent promoter of adhesion and sealant (such as polyurethane, epoxy, and phenol). In the glass wool and FRP products, it can be added into phenol resins to improve the wet resistance and mechanical performance. 收起 | |
| Silane ATPN-1120 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of...展開 Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone-polymers or as crosslinker (moisture crosslinking of polymers). The application as“coupling agent”leads in general to an improvement of mechanical and electrical product properties above all under exposure to heat and/or moisture. 收起 | |
| Silane Coupling Agent FD-6150 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | FD-6150 is a modified amino-alkyl multiple functional oligomeric silane. It functions efficiently as an adhesion promoter. Characteristics of FD-6150 include improved adhesion with the unprimed substrate, faster curing speed, reduce yellowing, better hydr...展開 FD-6150 is a modified amino-alkyl multiple functional oligomeric silane. It functions efficiently as an adhesion promoter. Characteristics of FD-6150 include improved adhesion with the unprimed substrate, faster curing speed, reduce yellowing, better hydrophobic properties, greater flexibility, and low VOC. 收起 | |
| Silane Coupling Agent KH-151 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | KH-151 silane, vinyltriethoxysilane, is a vinyl-functional silane that may be used to improve the bond between glass fiber or mineral fillers and resins that are reactive towards the vinyl group. It is also employed to functionalize resins via free radica...展開 KH-151 silane, vinyltriethoxysilane, is a vinyl-functional silane that may be used to improve the bond between glass fiber or mineral fillers and resins that are reactive towards the vinyl group. It is also employed to functionalize resins via free radical mechanisms-copolymerization or grafting and to modify surfaces. It is used as a coupling agent in filled polymer systems, which cure via a free radical mechanism. It is also is used as a finish for glass or a binder additive in glass-reinforced polyester resins, as well as an integral additive in mineral-filled polyester or DAP resin compounds. 收起 | |
| Silane Coupling Agent KH-171 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | KH-171 is a colorless transparent liquid used as a polymer modifier via grafting reactions. The resulting pendant trimethoxysilyl groups can function as moisture-activated crosslinking sites. The silane grafted polymer is processed as a thermoplastic and ...展開 KH-171 is a colorless transparent liquid used as a polymer modifier via grafting reactions. The resulting pendant trimethoxysilyl groups can function as moisture-activated crosslinking sites. The silane grafted polymer is processed as a thermoplastic and crosslinking occurs after fabrication of the finished article upon exposure to moisture. 收起 | |
| Silane Coupling Agent KH-172 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | KH-172 is a colorless transparent, vinyl-functional coupling agent that promotes adhesion among unsaturated, polyester-type resins or crosslinked polyethylene resins or elastomers and inorganic substrates, including fiber glass, silica, silicates and many...展開 KH-172 is a colorless transparent, vinyl-functional coupling agent that promotes adhesion among unsaturated, polyester-type resins or crosslinked polyethylene resins or elastomers and inorganic substrates, including fiber glass, silica, silicates and many metal oxides. When used as coupling agent, it reduces the sensitivity of the products mechanical and electrical properties to heat and/or moisture. 收起 | |
| Silane Coupling Agent KH-300 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | KH-300 is a colorless transparent liquid silane coupling agent. It is the main material to produce other silane coupling agents and a variety of silicone materials. As a kind of rubber process auxiliary agent, it can be used to couple inorganic fillers in...展開 KH-300 is a colorless transparent liquid silane coupling agent. It is the main material to produce other silane coupling agents and a variety of silicone materials. As a kind of rubber process auxiliary agent, it can be used to couple inorganic fillers in a variety of halogenated rubber, such as: neoprene rubber, chlorobutyl rubber, and chlorosulfonated polyethylene rubber. It is used to produce light-color products to improve various physical and mechanical properties. Also applied in anti mildew smell finishing agent, antistatic agent, and blood coagulant agent. 收起 | |
| Silane Coupling Agent KH-350 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | KH-350 is a high purity, undiluted N-octyltriethoxy-silane. When diluted with an appropriate solvent, it can be used in the formulation of water repellent products. Upon proper application, the formulated product will penetrate and provide water repellenc...展開 KH-350 is a high purity, undiluted N-octyltriethoxy-silane. When diluted with an appropriate solvent, it can be used in the formulation of water repellent products. Upon proper application, the formulated product will penetrate and provide water repellency by chemically reacting with the cementitious substrate. Treated substrates are hydrophobic and retain their original appearance. KH-350 can also be used to improve the compatibility of mineral fillers or pigments in polyolefins or to ease their dispersion in nonpolar matrices. 收起 | |
| Silane Coupling Agent KH-360 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | KH-360 is a colorless, transparent liquid alkylalkoxysilane. It is an important component in sol-gel systems. It is used as a crosslinking agent for room temperature cured silicone rubber, coupling agent for glass fiber and SiO2, as well as a strengthenin...展開 KH-360 is a colorless, transparent liquid alkylalkoxysilane. It is an important component in sol-gel systems. It is used as a crosslinking agent for room temperature cured silicone rubber, coupling agent for glass fiber and SiO2, as well as a strengthening treatment agent for plastic-layer pressing material. The most common alkoxy crosslinkers are methoxy or ethoxy silanes due to their high reactivity. The reaction precedes by nucleophilic substitution usually in the presence of acid or base catalysts. Alkoxides react directly with silanols or with water to produce silanols. 收起 |
