UL Prospector

成功!

成功保存搜索結果
2-(2-Ethoxyethoxy) Ethylacrylate (EOEOEA) Beijing RBL Chemicals Co., Ltd. 2-(2-Ethoxyethoxy) Ethylacrylate (EOEOEA) is an acrylate monomer. This product appears as a clear liquid and has good flexibility and dilution properties. It can be used in UV-coatings for metal, wood, and in ink applications.
99.99% Conductive Shining Flake Silver Powder Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展開 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起
99.99% Conductive Silver Powder (Spherical) Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications.
Acetylated Distarch Ddipate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive.
Acetylated Distarch Phosphate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展開 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起
Acryloyl Morpholine (ACMO) Beijing RBL Chemicals Co., Ltd. Acryloyl Morpholine (ACMO) is a homopolymer that has good retention and elongation stability. This product appears as a colorless or slightly yellow, clear liquid that is soluble in various solvents. It can provide good resistance to alkali, acids, and so...展開 Acryloyl Morpholine (ACMO) is a homopolymer that has good retention and elongation stability. This product appears as a colorless or slightly yellow, clear liquid that is soluble in various solvents. It can provide good resistance to alkali, acids, and solvents, and be used in adhesives, UV printing inks, and industrial coatings. 收起
Alkylsulfonic Acid Ester of Phenol Plasticizer Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC.
C Glass Flake GF007/C Glassflake Ltd C Glass Flake GF007/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting i...展開 C Glass Flake GF007/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
C Glass Flake GF750/C Glassflake Ltd C Glass Flake GF750/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting i...展開 C Glass Flake GF750/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
C Glass Flake GF750MC Glassflake Ltd C Glass Flake GF750MC is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/-2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in...展開 C Glass Flake GF750MC is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/-2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
Cardanol Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...展開 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. 收起
Dipropylene Glycol Diacrylate (DPGDA) Beijing RBL Chemicals Co., Ltd. Dipropylene Glycol Diacrylate (DPGDA) is an acrylate monomer that has low viscosity, low volatility, fast curing, and good dilution. This product appears as a clear liquid, and it can be used in adhesives, inks, and coatings.
ECR Glass Flake GF001 Glassflake Ltd ECR Glass Flake GF001 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF001 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF002 Glassflake Ltd ECR Glass Flake GF002 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.3 - 2.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF002 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.3 - 2.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF003 Glassflake Ltd ECR Glass Flake GF003 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 2.3 - 3.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF003 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 2.3 - 3.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF005 Glassflake Ltd ECR Glass Flake GF005 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties ...展開 ECR Glass Flake GF005 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF007 Glassflake Ltd ECR Glass Flake GF007 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF007 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF100M (Milled) Glassflake Ltd ECR Glass Flake GF100M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF100M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF100M (Unmilled) Glassflake Ltd ECR Glass Flake GF100 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展開 ECR Glass Flake GF100 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF100nm (Unmilled) Glassflake Ltd ECR Glass Flake GF100nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF100nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF100nmM (Milled) Glassflake Ltd ECR Glass Flake GF100nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF100nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF350nm (Unmilled) Glassflake Ltd ECR Glass Flake GF350nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF350nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF350nmM (Milled) Glassflake Ltd ECR Glass Flake GF350nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF350nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF500M (Milled) Glassflake Ltd ECR Glass Flake GF500M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF500M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF500M (Unmilled) Glassflake Ltd ECR Glass Flake GF500 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展開 ECR Glass Flake GF500 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF500nm (Unmilled) Glassflake Ltd ECR Glass Flake GF500nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF500nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF500nmM (Milled) Glassflake Ltd ECR Glass Flake GF500nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF500nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF750M (Milled) Glassflake Ltd ECR Glass Flake GF750 (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF750 (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF750M (Unmilled) Glassflake Ltd ECR Glass Flake GF750 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展開 ECR Glass Flake GF750 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF750nm (Unmilled) Glassflake Ltd ECR Glass Flake GF750nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF750nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF750nmM (Milled) Glassflake Ltd ECR Glass Flake GF750nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF750nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
Fumed Silica Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....展開 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 收起
H0201 Long Kou Windstar Chemical Co., Ltd. H0201 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0301 Long Kou Windstar Chemical Co., Ltd. H0301 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0601 Long Kou Windstar Chemical Co., Ltd. H0601 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0801 Long Kou Windstar Chemical Co., Ltd. H0801 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0806 Long Kou Windstar Chemical Co., Ltd. H0806 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0901 Long Kou Windstar Chemical Co., Ltd. H0901 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0902 Long Kou Windstar Chemical Co., Ltd. H0902 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0903 Long Kou Windstar Chemical Co., Ltd. H0903 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0904 Long Kou Windstar Chemical Co., Ltd. H0904 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0905 Long Kou Windstar Chemical Co., Ltd. H0905 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0906 Long Kou Windstar Chemical Co., Ltd. H0906 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
Hydroxypropyl Aistarch Phosphate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive.
Kimicell® KCM 1000D Kimix Chemical Co., Ltd. Kimicell® KCM 1000D is a white to off-white powder, comprised of a water-soluble sodium carboxymethyl cellulose ether. It is designed for a target viscosity minimum of 900 mPa·s, 1%. It can be used as a high-strength binder, thickener and rheology control...展開 Kimicell® KCM 1000D is a white to off-white powder, comprised of a water-soluble sodium carboxymethyl cellulose ether. It is designed for a target viscosity minimum of 900 mPa·s, 1%. It can be used as a high-strength binder, thickener and rheology controller. It finds use in many printing ink applications, providing oil resistance and good adhesion to paper. 收起
Kimicell® KCM 2000D Kimix Chemical Co., Ltd. Kimicell® KCM 2000D is a white to off-white powder, comprised of a water-soluble sodium carboxymethyl cellulose ether. It is designed for a target viscosity minimum of 1000 mPa·s, 1%. It can be used as a high-strength binder, thickener and rheology contro...展開 Kimicell® KCM 2000D is a white to off-white powder, comprised of a water-soluble sodium carboxymethyl cellulose ether. It is designed for a target viscosity minimum of 1000 mPa·s, 1%. It can be used as a high-strength binder, thickener and rheology controller. It finds use in many printing ink applications, providing oil resistance and good adhesion to paper. 收起
Kimicell® KCM 6000D Kimix Chemical Co., Ltd. Kimicell® KCM 6000D is a white to off-white powder, comprised of a water-soluble sodium carboxymethyl cellulose ether. It is designed for a target viscosity between 6000 and 9000 mPa·s, 2%. It can be used as a high-strength binder, thickener and rheology ...展開 Kimicell® KCM 6000D is a white to off-white powder, comprised of a water-soluble sodium carboxymethyl cellulose ether. It is designed for a target viscosity between 6000 and 9000 mPa·s, 2%. It can be used as a high-strength binder, thickener and rheology controller. It finds use in many printing ink applications, providing oil resistance and good adhesion to paper. 收起
Kimicell® KCM 700D Kimix Chemical Co., Ltd. Kimicell® KCM 700D is a white to off-white powder, comprised of a water-soluble sodium carboxymethyl cellulose ether. It is designed for a target viscosity minimum of 500 mPa·s, 1%. It can be used as a high-strength binder, thickener and rheology controll...展開 Kimicell® KCM 700D is a white to off-white powder, comprised of a water-soluble sodium carboxymethyl cellulose ether. It is designed for a target viscosity minimum of 500 mPa·s, 1%. It can be used as a high-strength binder, thickener and rheology controller. It finds use in many printing ink applications, providing oil resistance and good adhesion to paper. 收起
Kimicell® KCM 8000D Kimix Chemical Co., Ltd. Kimicell® KCM 8000D is a white to off-white powder, comprised of a water-soluble sodium carboxymethyl cellulose ether. It is designed for a target viscosity minimum of 10000 mPa·s, 2%. It can be used as a high-strength binder, thickener and rheology contr...展開 Kimicell® KCM 8000D is a white to off-white powder, comprised of a water-soluble sodium carboxymethyl cellulose ether. It is designed for a target viscosity minimum of 10000 mPa·s, 2%. It can be used as a high-strength binder, thickener and rheology controller. It finds use in many printing ink applications, providing oil resistance and good adhesion to paper. 收起
Kimicell® KEC 100000 Kimix Chemical Co., Ltd. Kimicell® KEC 100000 is a white to off-white powder, comprised of a surface treated, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for fast dispersion without lumping and a target viscosity between 40000 and 52000 mPa·s, 2%. It can ...展開 Kimicell® KEC 100000 is a white to off-white powder, comprised of a surface treated, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for fast dispersion without lumping and a target viscosity between 40000 and 52000 mPa·s, 2%. It can be used as a stabilizer, thickener, protective colloid, water retention agent and rheology modifier. It finds use in many applications such as wallpaper and latex adhesives, ceramic glaze binders, latex paints, caulking compound and putty, printing inks and textile printing pastes. 收起
Kimicell® KEC 100000B Kimix Chemical Co., Ltd. Kimicell® KEC 100000B is a white to off-white powder, comprised of a biostable, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for low-foaming, good opacity and a target viscosity between 40000 and 52000 mPa·s, 2%. It can be used as ...展開 Kimicell® KEC 100000B is a white to off-white powder, comprised of a biostable, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for low-foaming, good opacity and a target viscosity between 40000 and 52000 mPa·s, 2%. It can be used as a stabilizer, thickener, protective colloid, water retention agent and rheology modifier. It finds use in many applications such as wallpaper and latex adhesives, ceramic glaze binders, latex paints, caulking compound and putty, printing inks and textile printing pastes. 收起
Kimicell® KEC 10000G Kimix Chemical Co., Ltd. Kimicell® KEC 10000G is a white to off-white powder, comprised of a modified, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for a target viscosity between 40000 and 52000 mPa·s, 2%. It can be used as a stabilizer, thickener, protect...展開 Kimicell® KEC 10000G is a white to off-white powder, comprised of a modified, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for a target viscosity between 40000 and 52000 mPa·s, 2%. It can be used as a stabilizer, thickener, protective colloid, water retention agent and rheology modifier. It finds use in many applications such as wallpaper and latex adhesives, ceramic glaze binders, latex paints, caulking compound and putty, printing inks and textile printing pastes. 收起
Kimicell® KEC 150 Kimix Chemical Co., Ltd. Kimicell® KEC 150 is a white to off-white powder, comprised of a surface treated, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for fast dispersion without lumping and a target viscosity between 150 and 200 mPa·s, 2%. It can be used...展開 Kimicell® KEC 150 is a white to off-white powder, comprised of a surface treated, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for fast dispersion without lumping and a target viscosity between 150 and 200 mPa·s, 2%. It can be used as a stabilizer, thickener, protective colloid, water retention agent and rheology modifier. It finds use in many applications such as wallpaper and latex adhesives, ceramic glaze binders, latex paints, caulking compound and putty, printing inks and textile printing pastes. 收起
Kimicell® KEC 150000 Kimix Chemical Co., Ltd. Kimicell® KEC 150000 is a white to off-white powder, comprised of a surface treated, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for fast dispersion without lumping and a target viscosity between 60000 and 70000 mPa·s, 2%. It can ...展開 Kimicell® KEC 150000 is a white to off-white powder, comprised of a surface treated, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for fast dispersion without lumping and a target viscosity between 60000 and 70000 mPa·s, 2%. It can be used as a stabilizer, thickener, protective colloid, water retention agent and rheology modifier. It finds use in many applications such as wallpaper and latex adhesives, ceramic glaze binders, latex paints, caulking compound and putty, printing inks and textile printing pastes. 收起
Kimicell® KEC 150000G Kimix Chemical Co., Ltd. Kimicell® KEC 150000G is a white to off-white powder, comprised of a modified, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for a target viscosity between 15000 and 20000 mPa·s, 2%. It can be used as a stabilizer, thickener, protec...展開 Kimicell® KEC 150000G is a white to off-white powder, comprised of a modified, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for a target viscosity between 15000 and 20000 mPa·s, 2%. It can be used as a stabilizer, thickener, protective colloid, water retention agent and rheology modifier. It finds use in many applications such as wallpaper and latex adhesives, ceramic glaze binders, latex paints, caulking compound and putty, printing inks and textile printing pastes. 收起
Kimicell® KEC 15000B Kimix Chemical Co., Ltd. Kimicell® KEC 15000B is a white to off-white powder, comprised of a biostable, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for low-foaming, good opacity and a target viscosity between 10000 and 12000 mPa·s, 2%. It can be used as a...展開 Kimicell® KEC 15000B is a white to off-white powder, comprised of a biostable, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for low-foaming, good opacity and a target viscosity between 10000 and 12000 mPa·s, 2%. It can be used as a stabilizer, thickener, protective colloid, water retention agent and rheology modifier. It finds use in many applications such as wallpaper and latex adhesives, ceramic glaze binders, latex paints, caulking compound and putty, printing inks and textile printing pastes. 收起
Kimicell® KEC 30000 Kimix Chemical Co., Ltd. Kimicell® KEC 30000 is a white to off-white powder, comprised of a surface treated, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for fast dispersion without lumping and a target viscosity between 15000 and 20000 mPa·s, 2%. It can b...展開 Kimicell® KEC 30000 is a white to off-white powder, comprised of a surface treated, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for fast dispersion without lumping and a target viscosity between 15000 and 20000 mPa·s, 2%. It can be used as a stabilizer, thickener, protective colloid, water retention agent and rheology modifier. It finds use in many applications such as wallpaper and latex adhesives, ceramic glaze binders, latex paints, caulking compound and putty, printing inks and textile printing pastes. 收起
Kimicell® KEC 30000B Kimix Chemical Co., Ltd. Kimicell® KEC 30000B is a white to off-white powder, comprised of a biostable, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for low-foaming, good opacity and a target viscosity between 15000 and 20000 mPa·s, 2%. It can be used as a...展開 Kimicell® KEC 30000B is a white to off-white powder, comprised of a biostable, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for low-foaming, good opacity and a target viscosity between 15000 and 20000 mPa·s, 2%. It can be used as a stabilizer, thickener, protective colloid, water retention agent and rheology modifier. It finds use in many applications such as wallpaper and latex adhesives, ceramic glaze binders, latex paints, caulking compound and putty, printing inks and textile printing pastes. 收起
Kimicell® KEC 30000G Kimix Chemical Co., Ltd. Kimicell® KEC 30000G is a white to off-white powder, comprised of a modified, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for a target viscosity between 15000 and 20000 mPa·s, 2%. It can be used as a stabilizer, thickener, protect...展開 Kimicell® KEC 30000G is a white to off-white powder, comprised of a modified, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for a target viscosity between 15000 and 20000 mPa·s, 2%. It can be used as a stabilizer, thickener, protective colloid, water retention agent and rheology modifier. It finds use in many applications such as wallpaper and latex adhesives, ceramic glaze binders, latex paints, caulking compound and putty, printing inks and textile printing pastes. 收起
Kimicell® KEC 40000G Kimix Chemical Co., Ltd. Kimicell® KEC 40000G is a white to off-white powder, comprised of a modified, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for a target viscosity between 20000 and 25000 mPa·s, 2%. It can be used as a stabilizer, thickener, protect...展開 Kimicell® KEC 40000G is a white to off-white powder, comprised of a modified, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for a target viscosity between 20000 and 25000 mPa·s, 2%. It can be used as a stabilizer, thickener, protective colloid, water retention agent and rheology modifier. It finds use in many applications such as wallpaper and latex adhesives, ceramic glaze binders, latex paints, caulking compound and putty, printing inks and textile printing pastes. 收起
Kimicell® KEC 6000 Kimix Chemical Co., Ltd. Kimicell® KEC 6000 is a white to off-white powder, comprised of a surface treated, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for fast dispersion without lumping and a target viscosity between 4500 and 6000 mPa·s, 2%. It can be u...展開 Kimicell® KEC 6000 is a white to off-white powder, comprised of a surface treated, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for fast dispersion without lumping and a target viscosity between 4500 and 6000 mPa·s, 2%. It can be used as a stabilizer, thickener, protective colloid, water retention agent and rheology modifier. It finds use in many applications such as wallpaper and latex adhesives, ceramic glaze binders, latex paints, caulking compound and putty, printing inks and textile printing pastes. 收起
Kimicell® KEC 60000 Kimix Chemical Co., Ltd. Kimicell® KEC 60000 is a white to off-white powder, comprised of a surface treated, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for fast dispersion without lumping and a target viscosity between 25000 and 33000 mPa·s, 2%. It can b...展開 Kimicell® KEC 60000 is a white to off-white powder, comprised of a surface treated, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for fast dispersion without lumping and a target viscosity between 25000 and 33000 mPa·s, 2%. It can be used as a stabilizer, thickener, protective colloid, water retention agent and rheology modifier. It finds use in many applications such as wallpaper and latex adhesives, ceramic glaze binders, latex paints, caulking compound and putty, printing inks and textile printing pastes. 收起
Kimicell® KEC 60000B Kimix Chemical Co., Ltd. Kimicell® KEC 60000B is a white to off-white powder, comprised of a biostable, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for low-foaming, good opacity and a target viscosity between 25000 and 33000 mPa·s, 2%. It can be used as a...展開 Kimicell® KEC 60000B is a white to off-white powder, comprised of a biostable, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for low-foaming, good opacity and a target viscosity between 25000 and 33000 mPa·s, 2%. It can be used as a stabilizer, thickener, protective colloid, water retention agent and rheology modifier. It finds use in many applications such as wallpaper and latex adhesives, ceramic glaze binders, latex paints, caulking compound and putty, printing inks and textile printing pastes. 收起
Kimicell® KEC 60000G Kimix Chemical Co., Ltd. Kimicell® KEC 60000G is a white to off-white powder, comprised of a modified, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for a target viscosity between 25000 and 33000 mPa·s, 2%. It can be used as a stabilizer, thickener, protect...展開 Kimicell® KEC 60000G is a white to off-white powder, comprised of a modified, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for a target viscosity between 25000 and 33000 mPa·s, 2%. It can be used as a stabilizer, thickener, protective colloid, water retention agent and rheology modifier. It finds use in many applications such as wallpaper and latex adhesives, ceramic glaze binders, latex paints, caulking compound and putty, printing inks and textile printing pastes. 收起
Kimicell® KEC 6000B Kimix Chemical Co., Ltd. Kimicell® KEC 6000B is a white to off-white powder, comprised of a biostable, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for low-foaming, good opacity and a target viscosity between 60000 and 70000 mPa·s, 2%. It can be used as a ...展開 Kimicell® KEC 6000B is a white to off-white powder, comprised of a biostable, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for low-foaming, good opacity and a target viscosity between 60000 and 70000 mPa·s, 2%. It can be used as a stabilizer, thickener, protective colloid, water retention agent and rheology modifier. It finds use in many applications such as wallpaper and latex adhesives, ceramic glaze binders, latex paints, caulking compound and putty, printing inks and textile printing pastes. 收起
Kimicell® KEC 75000B Kimix Chemical Co., Ltd. Kimicell® KEC 75000B is a white to off-white powder, comprised of a biostable, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for low-foaming, good opacity and a target viscosity between 33000 and 40000 mPa·s, 2%. It can be used as a...展開 Kimicell® KEC 75000B is a white to off-white powder, comprised of a biostable, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for low-foaming, good opacity and a target viscosity between 33000 and 40000 mPa·s, 2%. It can be used as a stabilizer, thickener, protective colloid, water retention agent and rheology modifier. It finds use in many applications such as wallpaper and latex adhesives, ceramic glaze binders, latex paints, caulking compound and putty, printing inks and textile printing pastes. 收起
Kimicell® KEC 75000G Kimix Chemical Co., Ltd. Kimicell® KEC 75000G is a white to off-white powder, comprised of a modified, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for a target viscosity between 33000 and 40000 mPa·s, 2%. It can be used as a stabilizer, thickener, protect...展開 Kimicell® KEC 75000G is a white to off-white powder, comprised of a modified, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for a target viscosity between 33000 and 40000 mPa·s, 2%. It can be used as a stabilizer, thickener, protective colloid, water retention agent and rheology modifier. It finds use in many applications such as wallpaper and latex adhesives, ceramic glaze binders, latex paints, caulking compound and putty, printing inks and textile printing pastes. 收起
Kimpigment® Iron Oxide Black 318 Kimix Chemical Co., Ltd. Kimpigment® Iron Oxide Black 318 is a spherical-shaped, inert, non-toxic inorganic pigment with good opacity, high tinting strength, good light fastness, strong absorption of UV light and fine dispersing. It is resistant to acid, lime and alkaline and is ...展開 Kimpigment® Iron Oxide Black 318 is a spherical-shaped, inert, non-toxic inorganic pigment with good opacity, high tinting strength, good light fastness, strong absorption of UV light and fine dispersing. It is resistant to acid, lime and alkaline and is widely used as colorant for paints, coatings and inks. It may be used for full shaded products, or reduced by tinting with titanium dioxide (TiO2). 收起
Kimpigment® Iron Oxide Black 330 Kimix Chemical Co., Ltd. Kimpigment® Iron Oxide Black 330 is an inert, non-toxic inorganic pigment with good opacity, high tinting strength between 95 and 105%, good light fastness, strong absorption of UV light and fine dispersing. It is resistant to acid, lime and alkaline and ...展開 Kimpigment® Iron Oxide Black 330 is an inert, non-toxic inorganic pigment with good opacity, high tinting strength between 95 and 105%, good light fastness, strong absorption of UV light and fine dispersing. It is resistant to acid, lime and alkaline and is widely used as colorant for paints, coatings and inks. It may be used for full shaded products, or reduced by tinting with titanium dioxide (TiO2). 收起
Kimpigment® Iron Oxide Black 750 Kimix Chemical Co., Ltd. Kimpigment® Iron Oxide Black 750 is an inert, non-toxic inorganic pigment with good opacity, high tinting strength between 95 and 105%, good light fastness, strong absorption of UV light and fine dispersing. It is resistant to acid, lime and alkaline and ...展開 Kimpigment® Iron Oxide Black 750 is an inert, non-toxic inorganic pigment with good opacity, high tinting strength between 95 and 105%, good light fastness, strong absorption of UV light and fine dispersing. It is resistant to acid, lime and alkaline and is widely used as colorant for paints, coatings and inks. It may be used for full shaded products, or reduced by tinting with titanium dioxide (TiO2). 收起
Kimpigment® Iron Oxide Black 790 Kimix Chemical Co., Ltd. Kimpigment® Iron Oxide Black 790 is a spherical-shaped, inert, non-toxic inorganic pigment with good opacity, high tinting strength, good light fastness, strong absorption of UV light and fine dispersing. It is resistant to acid, lime and alkaline and is ...展開 Kimpigment® Iron Oxide Black 790 is a spherical-shaped, inert, non-toxic inorganic pigment with good opacity, high tinting strength, good light fastness, strong absorption of UV light and fine dispersing. It is resistant to acid, lime and alkaline and is widely used as colorant for paints, coatings and inks. It may be used for full shaded products, or reduced by tinting with titanium dioxide (TiO2). 收起
Kimpigment® Micronized Iron Oxide Black 318M Kimix Chemical Co., Ltd. Kimpigment® Micronized Iron Oxide Black 318M is a micronized black pigment. It has good opacity, high tinting strength between 97 and 103%, good light fastness, strong absorption of UV light and fine dispersing. It is widely used as colorant for paints, i...展開 Kimpigment® Micronized Iron Oxide Black 318M is a micronized black pigment. It has good opacity, high tinting strength between 97 and 103%, good light fastness, strong absorption of UV light and fine dispersing. It is widely used as colorant for paints, inks and coatings. It may be used for full shaded products, or reduced by tinting with titanium dioxide (TiO2). 收起
Kimpigment® Micronized Iron Oxide Red 105M Kimix Chemical Co., Ltd. Kimpigment® Micronized Iron Oxide Red 105M is a micronized red pigment. It has good opacity, high tinting strength between 97 and 103%, good light fastness, strong absorption of UV light and fine dispersing. It is widely used as colorant for paints, inks ...展開 Kimpigment® Micronized Iron Oxide Red 105M is a micronized red pigment. It has good opacity, high tinting strength between 97 and 103%, good light fastness, strong absorption of UV light and fine dispersing. It is widely used as colorant for paints, inks and coatings. It may be used for full shaded products, or reduced by tinting with titanium dioxide (TiO2). 收起
Kimpigment® Micronized Iron Oxide Red 110M Kimix Chemical Co., Ltd. Kimpigment® Micronized Iron Oxide Red 110M is a micronized red pigment. It has good opacity, high tinting strength between 97 and 103%, good light fastness, strong absorption of UV light and fine dispersing. It is widely used as colorant for paints, inks ...展開 Kimpigment® Micronized Iron Oxide Red 110M is a micronized red pigment. It has good opacity, high tinting strength between 97 and 103%, good light fastness, strong absorption of UV light and fine dispersing. It is widely used as colorant for paints, inks and coatings. It may be used for full shaded products, or reduced by tinting with titanium dioxide (TiO2). 收起
Kimpigment® Micronized Iron Oxide Red 130M Kimix Chemical Co., Ltd. Kimpigment® Micronized Iron Oxide Red 130M is a micronized red pigment. It has good opacity, high tinting strength between 97 and 103%, good light fastness, strong absorption of UV light and fine dispersing. It is widely used as colorant for paints, inks ...展開 Kimpigment® Micronized Iron Oxide Red 130M is a micronized red pigment. It has good opacity, high tinting strength between 97 and 103%, good light fastness, strong absorption of UV light and fine dispersing. It is widely used as colorant for paints, inks and coatings. It may be used for full shaded products, or reduced by tinting with titanium dioxide (TiO2). 收起
Kimpigment® Micronized Iron Oxide Yellow 910M Kimix Chemical Co., Ltd. Kimpigment® Micronized Iron Oxide Yellow 910M is a micronized yellow pigment. It has good opacity, high tinting strength between 97 and 103%, good light fastness, strong absorption of UV light and fine dispersing. It is widely used as colorant for paints,...展開 Kimpigment® Micronized Iron Oxide Yellow 910M is a micronized yellow pigment. It has good opacity, high tinting strength between 97 and 103%, good light fastness, strong absorption of UV light and fine dispersing. It is widely used as colorant for paints, inks and coatings. It may be used for full shaded products, or reduced by tinting with titanium dioxide (TiO2). 收起
Kimpigment® Micronized Iron Oxide Yellow 920M Kimix Chemical Co., Ltd. Kimpigment® Micronized Iron Oxide Yellow 920M is a micronized yellow pigment. It has good opacity, high tinting strength between 97 and 103%, good light fastness, strong absorption of UV light and fine dispersing. It is widely used as colorant for paints,...展開 Kimpigment® Micronized Iron Oxide Yellow 920M is a micronized yellow pigment. It has good opacity, high tinting strength between 97 and 103%, good light fastness, strong absorption of UV light and fine dispersing. It is widely used as colorant for paints, inks and coatings. It may be used for full shaded products, or reduced by tinting with titanium dioxide (TiO2). 收起
Kimpigment® R92 Kimix Chemical Co., Ltd. Kimpigment® R92 is a rutile titanium dioxide pigment, surface treated with silicon and aluminium. It has good whiteness, tint reducing power, high gloss and good weather stability. It can be used in paints, coatings, inks and powder coatings.
Kimpigment® R93 Kimix Chemical Co., Ltd. Kimpigment® R93 is a rutile titanium dioxide pigment, surface treated with zirconium and aluminium. It has good whiteness, tint reducing power, high gloss and good weather stability. It can be used in paints, coatings, inks and powder coatings.
Kimpigment® R93H Kimix Chemical Co., Ltd. Kimpigment® R93H is a rutile titanium dioxide pigment, surface treated with zirconium and aluminium. It has good whiteness, tint reducing power, high gloss and good weather stability. It can be used in paints, coatings, inks and powder coatings.
Kimresin® KSP 100 Kimix Chemical Co., Ltd. Kimresin® KSP 100 is an aromatic petroleum C9 resin suitable for use in paints, printing inks, coatings and adhesives. It provides added stability against acids and alkalis, enhances chemical stability and heat resistance. It can also act as a tackifier, ...展開 Kimresin® KSP 100 is an aromatic petroleum C9 resin suitable for use in paints, printing inks, coatings and adhesives. It provides added stability against acids and alkalis, enhances chemical stability and heat resistance. It can also act as a tackifier, softener and strengthening agent. 收起
Kimresin® KSP 100A Kimix Chemical Co., Ltd. Kimresin® KSP 100A is an aromatic petroleum C9 resin suitable for use in paints, printing inks, coatings and adhesives. It provides added stability against acids and alkalis, enhances chemical stability and heat resistance. It is especially suited for adh...展開 Kimresin® KSP 100A is an aromatic petroleum C9 resin suitable for use in paints, printing inks, coatings and adhesives. It provides added stability against acids and alkalis, enhances chemical stability and heat resistance. It is especially suited for adhesives, adding malleability anbd flexibility. 收起
Kimresin® KSP 110 Kimix Chemical Co., Ltd. Kimresin® KSP 110 is an aromatic petroleum C9 resin suitable for use in paints, printing inks, coatings and adhesives. It provides added stability against acids and alkalais, enhances chemical stability and heat resistance. It can also act as a tackifier,...展開 Kimresin® KSP 110 is an aromatic petroleum C9 resin suitable for use in paints, printing inks, coatings and adhesives. It provides added stability against acids and alkalais, enhances chemical stability and heat resistance. It can also act as a tackifier, softener and strengthening agent. 收起
Kimresin® KSP 120 Kimix Chemical Co., Ltd. Kimresin® KSP 120 is an aromatic petroleum C9 resin suitable for use in paints, printing inks, coatings and adhesives. It provides added stability against acids and alkalis, enhances chemical stability and heat resistance. It can also act as a tackifier, ...展開 Kimresin® KSP 120 is an aromatic petroleum C9 resin suitable for use in paints, printing inks, coatings and adhesives. It provides added stability against acids and alkalis, enhances chemical stability and heat resistance. It can also act as a tackifier, softener and strengthening agent. 收起
Kimresin® KSP 120A Kimix Chemical Co., Ltd. Kimresin® KSP 120A is an aromatic petroleum C9 resin suitable for use in paints, printing inks, coatings and adhesives. It provides added stability against acids and alkalis, enhances chemical stability and heat resistance. It is especially suited for adh...展開 Kimresin® KSP 120A is an aromatic petroleum C9 resin suitable for use in paints, printing inks, coatings and adhesives. It provides added stability against acids and alkalis, enhances chemical stability and heat resistance. It is especially suited for adhesives, adding malleability anbd flexibility. 收起
Kimresin® KSP 120P Kimix Chemical Co., Ltd. Kimresin® KSP 120P is an aromatic petroleum C9 resin suitable for use in enamel paints, with good compatibility with long oil alkyd resins. It provides added stability against acids and alkalis, enhances chemical stability and heat resistance. It can also...展開 Kimresin® KSP 120P is an aromatic petroleum C9 resin suitable for use in enamel paints, with good compatibility with long oil alkyd resins. It provides added stability against acids and alkalis, enhances chemical stability and heat resistance. It can also act as a tackifier, softener and strengthening agent. 收起
Kimresin® KSP 130 Kimix Chemical Co., Ltd. Kimresin® KSP 130 is an aromatic petroleum C9 resin suitable for use in paints, printing inks, coatings and adhesives. It provides added stability against acids and alkalis, enhances chemical stability and heat resistance. It can also act as a tackifier, ...展開 Kimresin® KSP 130 is an aromatic petroleum C9 resin suitable for use in paints, printing inks, coatings and adhesives. It provides added stability against acids and alkalis, enhances chemical stability and heat resistance. It can also act as a tackifier, softener and strengthening agent. 收起
Kimresin® KSP 140 Kimix Chemical Co., Ltd. Kimresin® KSP 140 is an aromatic petroleum C9 resin suitable for use in paints, printing inks, coatings and adhesives. It provides added stability against acids and alkalis, enhances chemical stability and heat resistance. It can also act as a tackifier, ...展開 Kimresin® KSP 140 is an aromatic petroleum C9 resin suitable for use in paints, printing inks, coatings and adhesives. It provides added stability against acids and alkalis, enhances chemical stability and heat resistance. It can also act as a tackifier, softener and strengthening agent. 收起
Kimresin® KSP 5100 Kimix Chemical Co., Ltd. Kimresin® KSP 5100 is a C5 petroleum resin with a bromine value of 250 cg/g maximum. It can be used in many applications, such as road marking paint, hot melt adhesives, sealants and printing ink. It enhances the water, UV and chemical resistance while im...展開 Kimresin® KSP 5100 is a C5 petroleum resin with a bromine value of 250 cg/g maximum. It can be used in many applications, such as road marking paint, hot melt adhesives, sealants and printing ink. It enhances the water, UV and chemical resistance while improving the stability, weathering, stain and wear resistance. 收起
Kimresin® KSP 5100A Kimix Chemical Co., Ltd. Kimresin® KSP 5100A is a C5 petroleum resin with a bromine value of 220 cg/g maximum. It can be used in many applications, such as road marking paint, hot melt adhesives, sealants and printing ink. It enhances the water, UV and chemical resistance while i...展開 Kimresin® KSP 5100A is a C5 petroleum resin with a bromine value of 220 cg/g maximum. It can be used in many applications, such as road marking paint, hot melt adhesives, sealants and printing ink. It enhances the water, UV and chemical resistance while improving the stability, weathering, stain and wear resistance. 收起
LA Glass Flake GF001LA Glassflake Ltd LA Glass Flake GF001LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substr...展開 LA Glass Flake GF001LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substrate which, unlike natural micas and synthetic micas, have a completely planar and smooth surface. They are also completely transparent, giving rise to effect pigments coated with metal oxides that display high brightness, good color purity, and high chroma. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起
LA Glass Flake GF100LA Glassflake Ltd LA Glass Flake GF100LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substr...展開 LA Glass Flake GF100LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substrate which, unlike natural micas and synthetic micas, have a completely planar and smooth surface. They are also completely transparent, giving rise to effect pigments coated with metal oxides that display high brightness, good color purity, and high chroma. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起
LA Glass Flake GF100MLA Glassflake Ltd LA Glass Flake GF100MLA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique subst...展開 LA Glass Flake GF100MLA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substrate which, unlike natural micas and synthetic micas, have a completely planar and smooth surface. They are also completely transparent, giving rise to effect pigments coated with metal oxides that display high brightness, good color purity, and high chroma. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起
Methyltriethoxysilane Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silico...展開 Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silicone resins and silicone rubber,silicone resins and silicone rubber. 收起
Methyltrimethoxysilane Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainl...展開 Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainly used as the crosslinking agent of room temperature vulcanized silicone rubber, as well as the glass fiber surface treatment agent and reinforced plastic laminate treatment agent, in order to improve the mechanical strength of products, heat resistance, moisture resistance. 收起
Modified Starch - Compound Active Printing Paste Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological pro...展開 Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起
Modified Starch - High End Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holdi...展開 Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. 收起
Modified Starch - Mid Range Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, ...展開 Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起
Moonshine® AgFlake 100-100 (GFEAGF-1100) Glassflake Ltd Moonshine® AgFlake 100-100 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 100 μm. High conductivity can be achieved at low loadings...展開 Moonshine® AgFlake 100-100 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 100 μm. High conductivity can be achieved at low loadings. Agflakes are lightweight in contrast to equivalent pure metal fillers. They may be used as both a functional and a decorative pigment. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起
Moonshine® AgFlake 100-20 (GFEAGF-1020) Glassflake Ltd Moonshine® AgFlake 100-20 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 20 μm. High conductivity can be achieved at low loadings. ...展開 Moonshine® AgFlake 100-20 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 20 μm. High conductivity can be achieved at low loadings. Agflakes are lightweight in contrast to equivalent pure metal fillers. They may be used as both a functional and a decorative pigment. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起