UL Prospector

成功!

成功保存搜索結果
2-(2-Ethoxyethoxy) Ethylacrylate (EOEOEA) Beijing RBL Chemicals Co., Ltd. 2-(2-Ethoxyethoxy) Ethylacrylate (EOEOEA) is an acrylate monomer. This product appears as a clear liquid and has good flexibility and dilution properties. It can be used in UV-coatings for metal, wood, and in ink applications.
99.99% Conductive Shining Flake Silver Powder Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展開 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起
99.99% Conductive Silver Powder (Spherical) Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications.
Acetylated Distarch Ddipate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive.
Acetylated Distarch Phosphate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展開 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起
Acryloyl Morpholine (ACMO) Beijing RBL Chemicals Co., Ltd. Acryloyl Morpholine (ACMO) is a homopolymer that has good retention and elongation stability. This product appears as a colorless or slightly yellow, clear liquid that is soluble in various solvents. It can provide good resistance to alkali, acids, and so...展開 Acryloyl Morpholine (ACMO) is a homopolymer that has good retention and elongation stability. This product appears as a colorless or slightly yellow, clear liquid that is soluble in various solvents. It can provide good resistance to alkali, acids, and solvents, and be used in adhesives, UV printing inks, and industrial coatings. 收起
Alkylsulfonic Acid Ester of Phenol Plasticizer Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC.
B-04 (Blue-black) Kito Chem B-04 (Blue-black) is a solvent based complex dye, the thickness of which is about 30% and is free of heavy metals. It has a high gloss with good solubility and compatibility with many kinds of resin. It can impart good acid and alkali resistance as well a...展開 B-04 (Blue-black) is a solvent based complex dye, the thickness of which is about 30% and is free of heavy metals. It has a high gloss with good solubility and compatibility with many kinds of resin. It can impart good acid and alkali resistance as well as heat resistance to a wide range of formulations. This product is suitable for use in coloring staining woods, hot stamping, leather dye, shoe polish, plastic coating spray, printing ink, coatings, packaging paper, aluminum foil and a variety of plastic coloring vacuum plating's. 收起
B-20 (Red light Black) Kito Chem B-20 (Red light Black) is a solvent based complex dye, the thickness of which is about 30% and is free of heavy metals. It has a high gloss with good solubility and compatibility with many kinds of resin. It can impart good acid and alkali resistance as w...展開 B-20 (Red light Black) is a solvent based complex dye, the thickness of which is about 30% and is free of heavy metals. It has a high gloss with good solubility and compatibility with many kinds of resin. It can impart good acid and alkali resistance as well as heat resistance to a wide range of formulations. This product is suitable for use in coloring staining woods, hot stamping, leather dye, shoe polish, plastic coating spray, printing ink, coatings, packaging paper, aluminum foil and a variety of plastic coloring vacuum plating's. 收起
B-56 (Absolute Black) Kito Chem B-56 (Absolute Black) is a solvent based complex dye, the thickness of which is about 30% and is free of heavy metals. It has a high gloss with good solubility and compatibility with many kinds of resin. It can impart good acid and alkali resistance as we...展開 B-56 (Absolute Black) is a solvent based complex dye, the thickness of which is about 30% and is free of heavy metals. It has a high gloss with good solubility and compatibility with many kinds of resin. It can impart good acid and alkali resistance as well as heat resistance to a wide range of formulations. This product is suitable for use in coloring staining woods, hot stamping, leather dye, shoe polish, plastic coating spray, printing ink, coatings, packaging paper, aluminum foil and a variety of plastic coloring vacuum plating's. 收起
BL-03 (Sapphire Blue) Kito Chem BL-03 (Sapphire Blue) is a solvent based complex dye, the thickness of which is about 30% and is free of heavy metals. It has a high gloss with good solubility and compatibility with many kinds of resin. It can impart good acid and alkali resistance as we...展開 BL-03 (Sapphire Blue) is a solvent based complex dye, the thickness of which is about 30% and is free of heavy metals. It has a high gloss with good solubility and compatibility with many kinds of resin. It can impart good acid and alkali resistance as well as heat resistance to a wide range of formulations. This product is suitable for use in coloring staining woods, hot stamping, leather dye, shoe polish, plastic coating spray, printing ink, coatings, packaging paper, aluminum foil and a variety of plastic coloring vacuum plating's. 收起
BL-06 (Sky Blue) Kito Chem BL-06 (Sky Blue) is a solvent based complex dye, the thickness of which is about 30% and is free of heavy metals. It has a high gloss with good solubility and compatibility with many kinds of resin. It can impart good acid and alkali resistance as well as...展開 BL-06 (Sky Blue) is a solvent based complex dye, the thickness of which is about 30% and is free of heavy metals. It has a high gloss with good solubility and compatibility with many kinds of resin. It can impart good acid and alkali resistance as well as heat resistance to a wide range of formulations. This product is suitable for use in coloring staining woods, hot stamping, leather dye, shoe polish, plastic coating spray, printing ink, coatings, packaging paper, aluminum foil and a variety of plastic coloring vacuum plating's. 收起
BR-005 (Reddish Brown) Kito Chem BR-005 (Reddish Brown) is a solvent based complex dye, the thickness of which is about 30% and is free of heavy metals. It has a high gloss with good solubility and compatibility with many kinds of resin. It can impart good acid and alkali resistance as w...展開 BR-005 (Reddish Brown) is a solvent based complex dye, the thickness of which is about 30% and is free of heavy metals. It has a high gloss with good solubility and compatibility with many kinds of resin. It can impart good acid and alkali resistance as well as heat resistance to a wide range of formulations. This product is suitable for use in coloring staining woods, hot stamping, leather dye, shoe polish, plastic coating spray, printing ink, coatings, packaging paper, aluminum foil and a variety of plastic coloring vacuum plating's. 收起
BR-02 (Dark Brown) Kito Chem BR-02 (Dark Brown) is a solvent based complex dye, the thickness of which is about 30% and is free of heavy metals. It has a high gloss with good solubility and compatibility with many kinds of resin. It can impart good acid and alkali resistance as well ...展開 BR-02 (Dark Brown) is a solvent based complex dye, the thickness of which is about 30% and is free of heavy metals. It has a high gloss with good solubility and compatibility with many kinds of resin. It can impart good acid and alkali resistance as well as heat resistance to a wide range of formulations. This product is suitable for use in coloring staining woods, hot stamping, leather dye, shoe polish, plastic coating spray, printing ink, coatings, packaging paper, aluminum foil and a variety of plastic coloring vacuum plating's. 收起
C Glass Flake GF007/C Glassflake Ltd C Glass Flake GF007/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting i...展開 C Glass Flake GF007/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
C Glass Flake GF750/C Glassflake Ltd C Glass Flake GF750/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting i...展開 C Glass Flake GF750/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
C Glass Flake GF750MC Glassflake Ltd C Glass Flake GF750MC is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/-2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in...展開 C Glass Flake GF750MC is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/-2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
Cardanol Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...展開 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. 收起
Dipropylene Glycol Diacrylate (DPGDA) Beijing RBL Chemicals Co., Ltd. Dipropylene Glycol Diacrylate (DPGDA) is an acrylate monomer that has low viscosity, low volatility, fast curing, and good dilution. This product appears as a clear liquid, and it can be used in adhesives, inks, and coatings.
ECR Glass Flake GF001 Glassflake Ltd ECR Glass Flake GF001 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF001 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF002 Glassflake Ltd ECR Glass Flake GF002 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.3 - 2.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF002 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.3 - 2.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF003 Glassflake Ltd ECR Glass Flake GF003 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 2.3 - 3.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF003 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 2.3 - 3.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF005 Glassflake Ltd ECR Glass Flake GF005 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties ...展開 ECR Glass Flake GF005 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF007 Glassflake Ltd ECR Glass Flake GF007 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF007 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF100M (Milled) Glassflake Ltd ECR Glass Flake GF100M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF100M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF100M (Unmilled) Glassflake Ltd ECR Glass Flake GF100 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展開 ECR Glass Flake GF100 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF100nm (Unmilled) Glassflake Ltd ECR Glass Flake GF100nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF100nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF100nmM (Milled) Glassflake Ltd ECR Glass Flake GF100nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF100nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF350nm (Unmilled) Glassflake Ltd ECR Glass Flake GF350nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF350nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF350nmM (Milled) Glassflake Ltd ECR Glass Flake GF350nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF350nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF500M (Milled) Glassflake Ltd ECR Glass Flake GF500M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF500M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF500M (Unmilled) Glassflake Ltd ECR Glass Flake GF500 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展開 ECR Glass Flake GF500 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF500nm (Unmilled) Glassflake Ltd ECR Glass Flake GF500nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF500nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF500nmM (Milled) Glassflake Ltd ECR Glass Flake GF500nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF500nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF750M (Milled) Glassflake Ltd ECR Glass Flake GF750 (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF750 (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF750M (Unmilled) Glassflake Ltd ECR Glass Flake GF750 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展開 ECR Glass Flake GF750 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF750nm (Unmilled) Glassflake Ltd ECR Glass Flake GF750nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF750nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF750nmM (Milled) Glassflake Ltd ECR Glass Flake GF750nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF750nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
Fumed Silica Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....展開 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 收起
G-20 (Green) Kito Chem G-20 (Green) is a solvent based complex dye, the thickness of which is about 30% and is free of heavy metals. It has a high gloss with good solubility and compatibility with many kinds of resin. It can impart good acid and alkali resistance as well as hea...展開 G-20 (Green) is a solvent based complex dye, the thickness of which is about 30% and is free of heavy metals. It has a high gloss with good solubility and compatibility with many kinds of resin. It can impart good acid and alkali resistance as well as heat resistance to a wide range of formulations. This product is suitable for use in coloring staining woods, hot stamping, leather dye, shoe polish, plastic coating spray, printing ink, coatings, packaging paper, aluminum foil and a variety of plastic coloring vacuum plating's. 收起
H0201 Long Kou Windstar Chemical Co., Ltd. H0201 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0301 Long Kou Windstar Chemical Co., Ltd. H0301 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0601 Long Kou Windstar Chemical Co., Ltd. H0601 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0801 Long Kou Windstar Chemical Co., Ltd. H0801 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0806 Long Kou Windstar Chemical Co., Ltd. H0806 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0901 Long Kou Windstar Chemical Co., Ltd. H0901 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0902 Long Kou Windstar Chemical Co., Ltd. H0902 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0903 Long Kou Windstar Chemical Co., Ltd. H0903 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0904 Long Kou Windstar Chemical Co., Ltd. H0904 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0905 Long Kou Windstar Chemical Co., Ltd. H0905 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0906 Long Kou Windstar Chemical Co., Ltd. H0906 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
HOMAAC™ 5105 Kito Chem HOMAAC™ 5105 is a water-based polymer made with a high dispersion of a modified polyacrylate polymer. It is a micro yellow transparent liquid with good wetting, dispersion and can reduce the viscosity of most formulations. It can impart high bonding stren...展開 HOMAAC™ 5105 is a water-based polymer made with a high dispersion of a modified polyacrylate polymer. It is a micro yellow transparent liquid with good wetting, dispersion and can reduce the viscosity of most formulations. It can impart high bonding strength and is easy to form with good volatility and less residual during production. It is suitable for grinding ceramic glaze powder, dispersion, forming stage, can be used as a ceramic glaze powder dispersing agent, wetting agent and adhesives. 收起
HOMAAC™ 5120 Kito Chem HOMAAC™ 5120 is a water-based polymer made of a waterborne thermoplastic acrylic polymer solution. It is a micro yellow transparent liquid with excellent adhesion to most substrates which can impart good fullness and shine. As well as high hardness, good ...展開 HOMAAC™ 5120 is a water-based polymer made of a waterborne thermoplastic acrylic polymer solution. It is a micro yellow transparent liquid with excellent adhesion to most substrates which can impart good fullness and shine. As well as high hardness, good water resistance and fast drying times. It is suitable for bottle packaging, cosmetics, gift boxes and other packaging paints and inks. 收起
High Polymer Polymerized Environment-Friendly Dye Black-060/061 Kito Chem High Polymer Polymerized Environment-Friendly Dye Black-060/061 is a highly polymerized environment-friendly dye made of a homogeneous compound. It is 100% homogeneous phase, high color strength and able to produce the more gloss and brighter colors. It c...展開 High Polymer Polymerized Environment-Friendly Dye Black-060/061 is a highly polymerized environment-friendly dye made of a homogeneous compound. It is 100% homogeneous phase, high color strength and able to produce the more gloss and brighter colors. It can easily adapt to solvent type and water based systems with excellent heat stability. This dye is well suited for use in the production of inks and paints with a wide range of colors. 收起
High Polymer Polymerized Environment-Friendly Dye Blue-040 Kito Chem High Polymer Polymerized Environment-Friendly Dye Blue-040 is a highly polymerized environment-friendly dye made of a homogeneous compound. It is 100% homogeneous phase, high color strength and able to produce the more gloss and brighter colors. It can ea...展開 High Polymer Polymerized Environment-Friendly Dye Blue-040 is a highly polymerized environment-friendly dye made of a homogeneous compound. It is 100% homogeneous phase, high color strength and able to produce the more gloss and brighter colors. It can easily adapt to solvent type and water based systems with excellent heat stability. This dye is well suited for use in the production of inks and paints with a wide range of colors. 收起
High Polymer Polymerized Environment-Friendly Dye Orange-020 Kito Chem High Polymer Polymerized Environment-Friendly Dye Orange-020 is a highly polymerized environment-friendly dye made of a homogeneous compound. It is 100% homogeneous phase, high color strength and able to produce the more gloss and brighter colors. It can ...展開 High Polymer Polymerized Environment-Friendly Dye Orange-020 is a highly polymerized environment-friendly dye made of a homogeneous compound. It is 100% homogeneous phase, high color strength and able to produce the more gloss and brighter colors. It can easily adapt to solvent type and water based systems with excellent heat stability. This dye is well suited for use in the production of inks and paints with a wide range of colors. 收起
High Polymer Polymerized Environment-Friendly Dye Red-010 Kito Chem High Polymer Polymerized Environment-Friendly Dye Red-010 is a highly polymerized environment-friendly dye made of a homogeneous compound. It is 100% homogeneous phase, high color strength and able to produce the more gloss and brighter colors. It can eas...展開 High Polymer Polymerized Environment-Friendly Dye Red-010 is a highly polymerized environment-friendly dye made of a homogeneous compound. It is 100% homogeneous phase, high color strength and able to produce the more gloss and brighter colors. It can easily adapt to solvent type and water based systems with excellent heat stability. This dye is well suited for use in the production of inks and paints with a wide range of colors. 收起
High Polymer Polymerized Environment-Friendly Dye Violet-050 Kito Chem High Polymer Polymerized Environment-Friendly Dye Violet-050 is a highly polymerized environment-friendly dye made of a homogeneous compound. It is 100% homogeneous phase, high color strength and able to produce the more gloss and brighter colors. It can ...展開 High Polymer Polymerized Environment-Friendly Dye Violet-050 is a highly polymerized environment-friendly dye made of a homogeneous compound. It is 100% homogeneous phase, high color strength and able to produce the more gloss and brighter colors. It can easily adapt to solvent type and water based systems with excellent heat stability. This dye is well suited for use in the production of inks and paints with a wide range of colors. 收起
High Polymer Polymerized Environment-Friendly Dye Yellow-030 Kito Chem High Polymer Polymerized Environment-Friendly Dye Yellow-030 is a highly polymerized environment-friendly dye made of a homogeneous compound. It is 100% homogeneous phase, high color strength and able to produce the more gloss and brighter colors. It can ...展開 High Polymer Polymerized Environment-Friendly Dye Yellow-030 is a highly polymerized environment-friendly dye made of a homogeneous compound. It is 100% homogeneous phase, high color strength and able to produce the more gloss and brighter colors. It can easily adapt to solvent type and water based systems with excellent heat stability. This dye is well suited for use in the production of inks and paints with a wide range of colors. 收起
Hydroxypropyl Aistarch Phosphate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive.
KEPERADH®-925 Kito Chem KEPERADH®-925 is an adhesive, made of a polyester with special structure. It is a colorless to yellowish transparent liquid that can be used to improve the adhesion of metallic baking paints. Also it can be used to improve the flexibility and impact resis...展開 KEPERADH®-925 is an adhesive, made of a polyester with special structure. It is a colorless to yellowish transparent liquid that can be used to improve the adhesion of metallic baking paints. Also it can be used to improve the flexibility and impact resistance, as well as the fullness and high-temperature resistance of most films. Improving the over all water and salt resistance of paints and inks applied to non-ferrous substrates. 收起
KEPERADH®-992 Kito Chem KEPERADH®-992 is an adhesive made of an epoxy group with a saline coupling agent. It is a colorless to yellowish transparent liquid that is highly hydrolysis with a strong adhesive force and fast bond. This additive is well suited for use in the productio...展開 KEPERADH®-992 is an adhesive made of an epoxy group with a saline coupling agent. It is a colorless to yellowish transparent liquid that is highly hydrolysis with a strong adhesive force and fast bond. This additive is well suited for use in the production of water-based coatings and water-based inks. It can be used in the substrate of most inorganic materials such as glass, ceramics, polymeric materials, paper, etc. 收起
KEPERADH®-993 Kito Chem KEPERADH®-993 is an adhesive made of an epoxy group with a saline coupling agent. It is a colorless to yellowish transparent liquid that is highly hydrolysis with a strong adhesive force and fast bond. This additive is well suited for use in the productio...展開 KEPERADH®-993 is an adhesive made of an epoxy group with a saline coupling agent. It is a colorless to yellowish transparent liquid that is highly hydrolysis with a strong adhesive force and fast bond. This additive is well suited for use in the production of water-based coatings and water-based inks. It can be used in the substrate of most inorganic materials such as glass, ceramics, polymeric materials, paper, etc.. 收起
KEPERADH®-994 Kito Chem KEPERADH®-994 is a high strength adhesive made of a 3-glycidyl allyltrimethylsilane solution. It is a colorless transparent liquid that is highly hydrolysis with a strong adhesive force and fast bond. This additive is well suited for use in the production...展開 KEPERADH®-994 is a high strength adhesive made of a 3-glycidyl allyltrimethylsilane solution. It is a colorless transparent liquid that is highly hydrolysis with a strong adhesive force and fast bond. This additive is well suited for use in the production of water-based print, printing ink of the ceramic and glass, ceramic and glass surface and hydrolyzed primers. It can be used in the substrate of the inorganic materials such as glass, ceramics, polymeric materials, paper, etc. 收起
KEPERDISP®-600 Kito Chem KEPERDISP®-600 is a wetting dispersing agent made of a low molecular weight amine salt of acidic polyester solution. It is a light yellow to dark yellow transparent liquid that can be fully dissolved in a petroleum solvent. It can effectively be used to r...展開 KEPERDISP®-600 is a wetting dispersing agent made of a low molecular weight amine salt of acidic polyester solution. It is a light yellow to dark yellow transparent liquid that can be fully dissolved in a petroleum solvent. It can effectively be used to reduce viscosity and increase liquidity of the system, thus improving pigment coverage and film gloss in most products. This product is well suited for use in the dispersion of titanium dioxide, inorganic pigments and fillers in wood lacquer formulations. 收起
KEPERDISP®-601P Kito Chem KEPERDISP®-601P is an inorganic pigment dispersing agent made from amine salt of an polycarboxylic acid solvent. It is a light yellow to brown transparent liquid that can be fully dissolved in a petroleum solvent. It can effectively be used to reduce visc...展開 KEPERDISP®-601P is an inorganic pigment dispersing agent made from amine salt of an polycarboxylic acid solvent. It is a light yellow to brown transparent liquid that can be fully dissolved in a petroleum solvent. It can effectively be used to reduce viscosity and increase liquidity of the system, thus improving pigment coverage and film gloss in most products. This product is well suited for use in the dispersion of titanium dioxide, inorganic pigments and fillers in wood lacquer formulations. 收起
KEPERDISP®-602 Kito Chem KEPERDISP®-602 is a universal wetting and dispersing agent made from polyester carboxylic acid. It is a transparent liquid with good wetting and dispersing to organic and inorganic pigments. It can reduce viscosity in a wide range of color pastes. This pr...展開 KEPERDISP®-602 is a universal wetting and dispersing agent made from polyester carboxylic acid. It is a transparent liquid with good wetting and dispersing to organic and inorganic pigments. It can reduce viscosity in a wide range of color pastes. This product is well suited for the production of organic and inorganic paints, coatings and printing inks. 收起
KEPERDISP®-603 Kito Chem KEPERDISP®-603 is a universal dispersing agent made of an polyether phosphate ester salt. It is a light yellow to brown transparent liquid which can reduce viscosity and shorten grinding time in most inorganic pigments with little to no anti-settling effe...展開 KEPERDISP®-603 is a universal dispersing agent made of an polyether phosphate ester salt. It is a light yellow to brown transparent liquid which can reduce viscosity and shorten grinding time in most inorganic pigments with little to no anti-settling effect after dilution. It is well suited for use in the production of solvent type paints and print inks, especially for UPE white print dispersions. 收起
KEPERDISP®-604 Kito Chem KEPERDISP®-604 is an inorganic pigment dispersing agent made from amine salt of an polycarboxylic acid solvent. It is a light yellow to brown transparent liquid that can be fully dissolved in a petroleum solvent. It can effectively be used to prevent floo...展開 KEPERDISP®-604 is an inorganic pigment dispersing agent made from amine salt of an polycarboxylic acid solvent. It is a light yellow to brown transparent liquid that can be fully dissolved in a petroleum solvent. It can effectively be used to prevent flooding, folding, settling and sagging of the pigment in most formulations. This product is well suited for use in the production of solvent based coatings, printing inks and especially for the dispersion of inorganic pigments in PCB inks. 收起
KEPERDISP®-608 Kito Chem KEPERDISP®-608 is an anti-flooding and floating, wetting and dispersing agent made of an unsaturated polycarboxylic acid with polysiloxane solution. It is a light yellow to brown transparent liquid that can reduce viscosity and save grinding time with mos...展開 KEPERDISP®-608 is an anti-flooding and floating, wetting and dispersing agent made of an unsaturated polycarboxylic acid with polysiloxane solution. It is a light yellow to brown transparent liquid that can reduce viscosity and save grinding time with most formulations. It is able to absorb a wider range of color particles due to its anchoring group. This product is well suited for use in the production of solvent based paints and inks requiring the dispersion of titanium dioxide, matting powders and other inorganic pigments in the mixture. 收起
KEPERDISP®-608S Kito Chem KEPERDISP®-608S is an anti-flooding and floating, wetting and dispersing agent made of an unsaturated polycarboxylic acid with polysiloxane solution. It is a light yellow to brown transparent liquid that can reduce viscosity and save grinding time with mo...展開 KEPERDISP®-608S is an anti-flooding and floating, wetting and dispersing agent made of an unsaturated polycarboxylic acid with polysiloxane solution. It is a light yellow to brown transparent liquid that can reduce viscosity and save grinding time with most formulations. It is able to absorb a wider range of color particles due to its anchoring group. This product is well suited for use in the production of solvent based paints and inks requiring the dispersion of titanium dioxide, matting powders and other inorganic pigments in the mixture. 收起
KEPERDISP®-613 Kito Chem KEPERDISP®-613 is a wetting and dispersing agent made with an unsaturated polyamine amides of polycarboxylic acidic solvent. It is a colorless to light yellow transparent liquid that can reduce the viscosity and improve over all liquidity of most formulat...展開 KEPERDISP®-613 is a wetting and dispersing agent made with an unsaturated polyamine amides of polycarboxylic acidic solvent. It is a colorless to light yellow transparent liquid that can reduce the viscosity and improve over all liquidity of most formulations. Which in-turn improves the over all dispersion efficiency of most products. It is well suited for use in alcohol and acid systems using melamine as a cross-linking agent as well as positive ammonium PU and other acrylic paint baking systems, which can reduce production time. 收起
KEPERDISP®-620 Kito Chem KEPERDISP®-620 is a general hyperdispersant for water and oil based systems made of a block copolymer solution. It is a light yellow transparent liquid with excellent dispersity and viscosity reducing effects. It can be used to reduce the dosage of the di...展開 KEPERDISP®-620 is a general hyperdispersant for water and oil based systems made of a block copolymer solution. It is a light yellow transparent liquid with excellent dispersity and viscosity reducing effects. It can be used to reduce the dosage of the dispersing agent as well as improve the efficiency of grinding. This product is well suited for the production of solvent based coatings and inks. 收起
KEPERDISP®-626 Kito Chem KEPERDISP®-626 is a wetting and dispersing agent made of a polymeric phosphate derivative. It is a colorless to light yellow transparent liquid which can be used to reduce viscosity and improve dispersion to most organic pigments, especially in UPE white ...展開 KEPERDISP®-626 is a wetting and dispersing agent made of a polymeric phosphate derivative. It is a colorless to light yellow transparent liquid which can be used to reduce viscosity and improve dispersion to most organic pigments, especially in UPE white paints. It has good tinctorial which prevents cobalt salt from turning green without effecting the drying rate of the film. This product is well suited for use in the production of solvent based paints, inks and UPE white print dispersions. 收起
KEPERDISP®-630 Kito Chem KEPERDISP®-630 is a universal wetting and dispersing agent made of a polyester carboxylic acid. It is a colorless to light yellow transparent liquid which has a good dispersion and anti-setting with inorganic pigments and fillers such as titanium dioxide....展開 KEPERDISP®-630 is a universal wetting and dispersing agent made of a polyester carboxylic acid. It is a colorless to light yellow transparent liquid which has a good dispersion and anti-setting with inorganic pigments and fillers such as titanium dioxide. This product is well suited for use most solvent systems for the production of printing inks. 收起
KEPERDISP®-635 Kito Chem KEPERDISP®-635 is a high molecular weight polyurethane dispersing agent. It is a light yellow transparent liquid that has excellent resistance to flocculation and can impart viscosity stability without seediness to most formulations. This product is well ...展開 KEPERDISP®-635 is a high molecular weight polyurethane dispersing agent. It is a light yellow transparent liquid that has excellent resistance to flocculation and can impart viscosity stability without seediness to most formulations. This product is well suited for use in in the production of middle and high class solvent coating color pastes, printing inks and high thick pastes. 收起
KEPERDISP®-639 Kito Chem KEPERDISP®-639 is a high molecular weight polyurethane dispersing agent. It is a light yellow transparent liquid that has excellent resistance to flocculation and can impart viscosity stability without seediness to most formulations. This product is well ...展開 KEPERDISP®-639 is a high molecular weight polyurethane dispersing agent. It is a light yellow transparent liquid that has excellent resistance to flocculation and can impart viscosity stability without seediness to most formulations. This product is well suited for use in in the production of middle and high class solvent coating color pastes, printing inks and high thick pastes. 收起
KEPERDISP®-645 Kito Chem KEPERDISP®-645 is a wetting and dispersing agent made of a high molecular weight polyurethane solution. It comes as a light yellow transparent liquid with good compatibility to most coating resin systems and can be used in solvent-based coating systems. I...展開 KEPERDISP®-645 is a wetting and dispersing agent made of a high molecular weight polyurethane solution. It comes as a light yellow transparent liquid with good compatibility to most coating resin systems and can be used in solvent-based coating systems. It is well suited for use in the production of inorganic and organic pigments as can promote the dispersion of titanium dioxide. 收起
KEPERDISP®-6461 Kito Chem KEPERDISP®-6461 is a high ploymeric wetting and dispersing agent made of a high-molecular polymer with a pigment affinity group. It is a colorless to light yellow transparent liquid that can be used to reduce viscosity and improve leveling of most formula...展開 KEPERDISP®-6461 is a high ploymeric wetting and dispersing agent made of a high-molecular polymer with a pigment affinity group. It is a colorless to light yellow transparent liquid that can be used to reduce viscosity and improve leveling of most formulas. It has good grinding efficiency, color spread and wettability with all kinds of pigments. This product is well suited for the production of all kinds of coating color pastes and printing ink pastes in a wide variety of systems. 收起
KEPERDISP®-6463 Kito Chem KEPERDISP®-6463 is a high ploymeric wetting and dispersing agent made of a high-molecular polymer with a pigment affinity group. It is a colorless to light yellow transparent liquid that can be used to reduce viscosity and improve leveling of most formula...展開 KEPERDISP®-6463 is a high ploymeric wetting and dispersing agent made of a high-molecular polymer with a pigment affinity group. It is a colorless to light yellow transparent liquid that can be used to reduce viscosity and improve leveling of most formulas. It has good grinding efficiency, color spread and wettability with all kinds of pigments. This product is well suited for the production of all kinds of coating color pastes and printing ink pastes in a wide variety of systems. 收起
KEPERDISP®-6517 Kito Chem KEPERDISP®-6517 is a high molecular weight polyurethane hyperdispersant agent made of a high molecular weight polyester solution with multipoint anchor groups. It is a light brown waxy or heavy-gravity material which can increase the concentration and imp...展開 KEPERDISP®-6517 is a high molecular weight polyurethane hyperdispersant agent made of a high molecular weight polyester solution with multipoint anchor groups. It is a light brown waxy or heavy-gravity material which can increase the concentration and improve the fluidity of most formulas. It has good dispersion stability with anti-flooding, floating flocculation and subside affecting properties. This product is well suited for sue in the production of printing inks and polarity coatings with very low or high pigment content. 收起
KEPERDISP®-6520 Kito Chem KEPERDISP®-6520 is a general type hyperdispersant for water and oil systems, made of a high molecular weight block copolymer with an alkali anchoring group. It is a light yellow transparent liquid that can lower viscosity and increase the content of carbo...展開 KEPERDISP®-6520 is a general type hyperdispersant for water and oil systems, made of a high molecular weight block copolymer with an alkali anchoring group. It is a light yellow transparent liquid that can lower viscosity and increase the content of carbon black in abrasive binders. It is well suited for use in medium carbon black concentrated pulp dispersions and other organic pigments used in printing inks. 收起
KEPERDISP®-6527 Kito Chem KEPERDISP®-6527 is a general water type hyperdispersant made of a block copolymer solution. It is a light yellow transparent liquid formulated to impart a good wetting and deflocculant effect with organic and inorganic pigments. It can be used to reduce t...展開 KEPERDISP®-6527 is a general water type hyperdispersant made of a block copolymer solution. It is a light yellow transparent liquid formulated to impart a good wetting and deflocculant effect with organic and inorganic pigments. It can be used to reduce the viscosity of most coatings, giving it improved film gloss and color brightness. This product is well suited for use in the production of water-based coatings and printing inks. 收起
KEPERDISP®-6528 Kito Chem KEPERDISP®-6528 is a high molecular weight polyurethane hyperdispersant agent made of a polyester solution with multipoint anchor groups. It is a light yellow heavy-gravity liquid with excellent compatibility in most resin and solvent based systems. Solub...展開 KEPERDISP®-6528 is a high molecular weight polyurethane hyperdispersant agent made of a polyester solution with multipoint anchor groups. It is a light yellow heavy-gravity liquid with excellent compatibility in most resin and solvent based systems. Soluble in ester, ketone, and aromatic hydrocarbon solvents. It is well suited for use in the production of general industrial paints and gravure printing inks. 收起
KEPERDISP®-6532 Kito Chem KEPERDISP®-6532 is a high molecular weight polyurethane hyperdispersant agent made of a solution with multi-point anchor groups. It is a light brown waxy or heavy-gravity fluid which can improve the rheological property of most resin based ink and coating...展開 KEPERDISP®-6532 is a high molecular weight polyurethane hyperdispersant agent made of a solution with multi-point anchor groups. It is a light brown waxy or heavy-gravity fluid which can improve the rheological property of most resin based ink and coating formulations. It has good color spread and dispersion of organic and carbon black pigments. And is well suited for use in UV or solvent type systems. 收起
KEPERPOL®-3202W Kito Chem KEPERPOL®-3202Wis a water-based system silicone defoaming agent. Made of a Polyether siloxane concentrate with fumed silica, it comes as a milk white liquid which can be easily diluted with water. It is particularly suitable for the elimination the microb...展開 KEPERPOL®-3202Wis a water-based system silicone defoaming agent. Made of a Polyether siloxane concentrate with fumed silica, it comes as a milk white liquid which can be easily diluted with water. It is particularly suitable for the elimination the microbubbles and bullae in generated airless spraying, curtain coating. And is well suited for the production of inks and coatings using water-based or alcohol as a solvent. 收起
KEPERPOL®-3203W Kito Chem KEPERPOL®-3203W is a water-based silicone emulsion and defoaming agent made of polysiloxane. It is a mlik white liquid that can be easily added to many kinds of water-based or alcohol systems. This additive is well suited for use in the production of pain...展開 KEPERPOL®-3203W is a water-based silicone emulsion and defoaming agent made of polysiloxane. It is a mlik white liquid that can be easily added to many kinds of water-based or alcohol systems. This additive is well suited for use in the production of paints, coatings and printing inks. 收起
KEPERPOL®-3225W Kito Chem KEPERPOL®-3225W is a water-based system silicone defoaming agent. Made of a Polyether siloxane concentrate with fumed silica, it comes as a milk white liquid which can be easily diluted with water. It is particularly suitable for the elimination the micro...展開 KEPERPOL®-3225W is a water-based system silicone defoaming agent. Made of a Polyether siloxane concentrate with fumed silica, it comes as a milk white liquid which can be easily diluted with water. It is particularly suitable for the elimination the microbubbles and bullae in generated airless spraying, curtain coating. And is well suited for the production of varnishes, inks and coatings using water-based or alcohol as a solvent. 收起
KEPERPOL®-3301W Kito Chem KEPERPOL®-3301W is a water-based system silicone defoaming agent. Made of a Polyether siloxane concentrate with fumed silica, it comes as a milk white liquid which can be easily diluted with water. It is particularly suitable for the elimination the micro...展開 KEPERPOL®-3301W is a water-based system silicone defoaming agent. Made of a Polyether siloxane concentrate with fumed silica, it comes as a milk white liquid which can be easily diluted with water. It is particularly suitable for the elimination the microbubbles and bullae in generated airless spraying, curtain coating. And is well suited for the production of varnishes, inks and coatings using water-based or alcohol as a solvent. 收起
KEPERPOL®-3309W Kito Chem KEPERPOL®-3309W is a water-based silicone emulsion and defoaming agent made of polysiloxane. It is a milk white liquid that can be easily added to many kinds of water-based or alcohol systems. This additive is well suited for use in the production of wate...展開 KEPERPOL®-3309W is a water-based silicone emulsion and defoaming agent made of polysiloxane. It is a milk white liquid that can be easily added to many kinds of water-based or alcohol systems. This additive is well suited for use in the production of water-based paint and varnish, and the relief block, gravure system. 收起
KEPERPOL®-3310W Kito Chem KEPERPOL®-3310W is a water-based system silicone defoaming agent. Made of a self-emulsifying polyether siloxane emulsions with fumed silica, it comes as a milk white liquid which can be easily diluted with water. It is emulsifier free with good moment def...展開 KEPERPOL®-3310W is a water-based system silicone defoaming agent. Made of a self-emulsifying polyether siloxane emulsions with fumed silica, it comes as a milk white liquid which can be easily diluted with water. It is emulsifier free with good moment defoaming and sustained defoaming performance. And is well suited for the production of inks and coatings using water-based or alcohol as a solvent. 收起
KEPERPOL®-3319W Kito Chem KEPERPOL®-3319W is a water-based system silicone defoaming agent. Made of polyether siloxane concentrate, it comes as a milk white liquid which can be added to dipropylene glycol monomethyl ether based solvents. It is well suitable for used in the abrasiv...展開 KEPERPOL®-3319W is a water-based system silicone defoaming agent. Made of polyether siloxane concentrate, it comes as a milk white liquid which can be added to dipropylene glycol monomethyl ether based solvents. It is well suitable for used in the abrasive industry with very a good foam inhibition property. And is generally used for the high-gloss and semigloss defoaming systems for paints and Inks. 收起
KEPERPOL®-3362W Kito Chem KEPERPOL®-3362W is a water-based defoaming agent made with a concentrated mixture of slioxane copolymers and Si02. It is a slightly turbid liquid that can be easily dispersed in most water-based systems. This additive is well suited for use in the product...展開 KEPERPOL®-3362W is a water-based defoaming agent made with a concentrated mixture of slioxane copolymers and Si02. It is a slightly turbid liquid that can be easily dispersed in most water-based systems. This additive is well suited for use in the production of paints, coatings and printing inks. 收起
KEPERPOL®-703 Kito Chem KEPERPOL®-703 is a silicone defoaming agent made of a modified plysiloxane solution. it is a colorless transparent liquid with good foam inhibition and breaking performance in production, packing and application. This additive is well suited for use in th...展開 KEPERPOL®-703 is a silicone defoaming agent made of a modified plysiloxane solution. it is a colorless transparent liquid with good foam inhibition and breaking performance in production, packing and application. This additive is well suited for use in the production of in high gloss finishing paints, varnishes, and printing inks. 收起
KEPERPOL®-712 Kito Chem KEPERPOL®-712 is a non-silicon defoaming agent made of an Acrylic copolymer solution. It is a colorless to yellowish transparent liquid with a strong foam inhibition to the production, packing, application of the coating and printing ink. And helps the de...展開 KEPERPOL®-712 is a non-silicon defoaming agent made of an Acrylic copolymer solution. It is a colorless to yellowish transparent liquid with a strong foam inhibition to the production, packing, application of the coating and printing ink. And helps the defoaming of the application in the porous substrate. It will not effect on the adhesive force between the films. It can be used in high, middle, low polarity systems. 收起
KEPERPOL®-713 Kito Chem KEPERPOL®-713 is a non-silicon defoaming agent made of an Acrylic copolymer solution. It is a colorless to yellowish transparent liquid with a strong foam inhibition to the production, packing, application of the coating and printing ink. And helps the de...展開 KEPERPOL®-713 is a non-silicon defoaming agent made of an Acrylic copolymer solution. It is a colorless to yellowish transparent liquid with a strong foam inhibition to the production, packing, application of the coating and printing ink. And helps the defoaming of the application in the porous substrate. It will not effect on the adhesive force between the films. It can be used in high, middle, low polarity systems. 收起
KEPERPOL®-717 Kito Chem KEPERPOL®-718 is a non-silicon defoaming agent made of a polyolefin solution. it is a yellowish transparent liquid with excellent compatibility in film, dose not effect on the transparency and a very low cratering tendency. It has good defoaming deaeratio...展開 KEPERPOL®-718 is a non-silicon defoaming agent made of a polyolefin solution. it is a yellowish transparent liquid with excellent compatibility in film, dose not effect on the transparency and a very low cratering tendency. It has good defoaming deaeration in medium low polarity system such as unsaturated polyester, polyurethane, epoxy and so on, but dose not effect on the transparency. This additive is well suited for use in the production of medium and low polarity solvent type coating and printing inks. 收起
KEPERPOL®-718 Kito Chem KEPERPOL®-718 is a non-silicon defoaming agent made of a polyolefin solution. it is a yellowish transparent liquid with excellent compatibility in film, dose not effect on the transparency and a very low cratering tendency. It has good defoaming deaeratio...展開 KEPERPOL®-718 is a non-silicon defoaming agent made of a polyolefin solution. it is a yellowish transparent liquid with excellent compatibility in film, dose not effect on the transparency and a very low cratering tendency. It has good defoaming deaeration in medium low polarity system such as unsaturated polyester, polyurethane, epoxy and so on, but dose not effect on the transparency. This additive is well suited for use in the production of medium and low polarity solvent type coating and printing inks. 收起
KEPERPOL®-720 Kito Chem KEPERPOL®-720 is a non-silicon defoaming agent made of a Vinyl ether polymer solution. it is a colorless, transparent liquid with excellent compatibility in film, dose not effect on the transparency and a very low cratering tendency. It has good defoaming...展開 KEPERPOL®-720 is a non-silicon defoaming agent made of a Vinyl ether polymer solution. it is a colorless, transparent liquid with excellent compatibility in film, dose not effect on the transparency and a very low cratering tendency. It has good defoaming deaeration in medium low polarity system such as unsaturated polyester, polyurethane, epoxy and so on, but dose not effect on the transparency. This additive is well suited for use in the production of medium and low polarity solvent type coating and printing inks. 收起
KEPERPOL®-730 Kito Chem KEPERPOL®-730 is a non-silicon defoaming agent made of an Acrylic copolymer solution. It is a colorless to yellowish transparent liquid with a strong foam inhibition to the production, packing, application of the coating and printing ink. And helps the de...展開 KEPERPOL®-730 is a non-silicon defoaming agent made of an Acrylic copolymer solution. It is a colorless to yellowish transparent liquid with a strong foam inhibition to the production, packing, application of the coating and printing ink. And helps the defoaming of the application in the porous substrate. It will not effect on the adhesive force between the films. It can be used in high, middle, low polarity systems. 收起