UL Prospector

成功!

成功保存搜索結果
2-(2-Ethoxyethoxy) Ethylacrylate (EOEOEA) Beijing RBL Chemicals Co., Ltd. 2-(2-Ethoxyethoxy) Ethylacrylate (EOEOEA) is an acrylate monomer. This product appears as a clear liquid and has good flexibility and dilution properties. It can be used in UV-coatings for metal, wood, and in ink applications.
99.99% Conductive Shining Flake Silver Powder Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展開 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起
99.99% Conductive Silver Powder (Spherical) Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications.
Acetylated Distarch Ddipate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive.
Acetylated Distarch Phosphate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展開 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起
Acryloyl Morpholine (ACMO) Beijing RBL Chemicals Co., Ltd. Acryloyl Morpholine (ACMO) is a homopolymer that has good retention and elongation stability. This product appears as a colorless or slightly yellow, clear liquid that is soluble in various solvents. It can provide good resistance to alkali, acids, and so...展開 Acryloyl Morpholine (ACMO) is a homopolymer that has good retention and elongation stability. This product appears as a colorless or slightly yellow, clear liquid that is soluble in various solvents. It can provide good resistance to alkali, acids, and solvents, and be used in adhesives, UV printing inks, and industrial coatings. 收起
Aldehyde Resin KY-A81 Yueyang Keyuan Innovative Materials Co., Ltd. Aldehyde Resin KY-A81 can be used in various solvent-based paints, solvent-based inks, solvent-free coatings, water-based coatings, powder coatings and has compatibility with some resins. Examples of the resin's use are in car mending paints. It can also...展開 Aldehyde Resin KY-A81 can be used in various solvent-based paints, solvent-based inks, solvent-free coatings, water-based coatings, powder coatings and has compatibility with some resins. Examples of the resin's use are in car mending paints. It can also be used as a carrier for pigment paste. 收起
Alkylsulfonic Acid Ester of Phenol Plasticizer Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC.
C Glass Flake GF007/C Glassflake Ltd C Glass Flake GF007/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting i...展開 C Glass Flake GF007/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
C Glass Flake GF750/C Glassflake Ltd C Glass Flake GF750/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting i...展開 C Glass Flake GF750/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
C Glass Flake GF750MC Glassflake Ltd C Glass Flake GF750MC is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/-2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in...展開 C Glass Flake GF750MC is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/-2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
Cardanol Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...展開 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. 收起
Dipropylene Glycol Diacrylate (DPGDA) Beijing RBL Chemicals Co., Ltd. Dipropylene Glycol Diacrylate (DPGDA) is an acrylate monomer that has low viscosity, low volatility, fast curing, and good dilution. This product appears as a clear liquid, and it can be used in adhesives, inks, and coatings.
ECR Glass Flake GF001 Glassflake Ltd ECR Glass Flake GF001 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF001 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF002 Glassflake Ltd ECR Glass Flake GF002 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.3 - 2.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF002 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.3 - 2.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF003 Glassflake Ltd ECR Glass Flake GF003 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 2.3 - 3.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF003 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 2.3 - 3.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF005 Glassflake Ltd ECR Glass Flake GF005 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties ...展開 ECR Glass Flake GF005 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF007 Glassflake Ltd ECR Glass Flake GF007 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF007 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF100M (Milled) Glassflake Ltd ECR Glass Flake GF100M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF100M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF100M (Unmilled) Glassflake Ltd ECR Glass Flake GF100 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展開 ECR Glass Flake GF100 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF100nm (Unmilled) Glassflake Ltd ECR Glass Flake GF100nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF100nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF100nmM (Milled) Glassflake Ltd ECR Glass Flake GF100nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF100nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF350nm (Unmilled) Glassflake Ltd ECR Glass Flake GF350nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF350nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF350nmM (Milled) Glassflake Ltd ECR Glass Flake GF350nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF350nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF500M (Milled) Glassflake Ltd ECR Glass Flake GF500M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF500M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF500M (Unmilled) Glassflake Ltd ECR Glass Flake GF500 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展開 ECR Glass Flake GF500 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF500nm (Unmilled) Glassflake Ltd ECR Glass Flake GF500nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF500nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF500nmM (Milled) Glassflake Ltd ECR Glass Flake GF500nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF500nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF750M (Milled) Glassflake Ltd ECR Glass Flake GF750 (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF750 (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF750M (Unmilled) Glassflake Ltd ECR Glass Flake GF750 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展開 ECR Glass Flake GF750 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF750nm (Unmilled) Glassflake Ltd ECR Glass Flake GF750nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF750nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF750nmM (Milled) Glassflake Ltd ECR Glass Flake GF750nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF750nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
Fumed Silica Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....展開 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 收起
H0201 Long Kou Windstar Chemical Co., Ltd. H0201 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0301 Long Kou Windstar Chemical Co., Ltd. H0301 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0601 Long Kou Windstar Chemical Co., Ltd. H0601 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0801 Long Kou Windstar Chemical Co., Ltd. H0801 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0806 Long Kou Windstar Chemical Co., Ltd. H0806 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0901 Long Kou Windstar Chemical Co., Ltd. H0901 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0902 Long Kou Windstar Chemical Co., Ltd. H0902 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0903 Long Kou Windstar Chemical Co., Ltd. H0903 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0904 Long Kou Windstar Chemical Co., Ltd. H0904 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0905 Long Kou Windstar Chemical Co., Ltd. H0905 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0906 Long Kou Windstar Chemical Co., Ltd. H0906 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
Hydroxypropyl Aistarch Phosphate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive.
KY-120 Ketone Resin Yueyang Keyuan Innovative Materials Co., Ltd. KY-120 Ketone Resin is a condensation from cyclohexanone that is bright and resistant to hydrolysis. It can be used in many types of inks, paints and coating formulations and can also be used in the manufacturing of pigment pastes.
KY-A81 Aldehyde Resin Yueyang Keyuan Innovative Materials Co., Ltd. KY-A81 Aldehyde Resin is a suitable resin for many solvent-based paints and inks including car mending paints. It can also be used in various coatings and as a pigment carrier in a paste form.
LA Glass Flake GF001LA Glassflake Ltd LA Glass Flake GF001LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substr...展開 LA Glass Flake GF001LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substrate which, unlike natural micas and synthetic micas, have a completely planar and smooth surface. They are also completely transparent, giving rise to effect pigments coated with metal oxides that display high brightness, good color purity, and high chroma. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起
LA Glass Flake GF100LA Glassflake Ltd LA Glass Flake GF100LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substr...展開 LA Glass Flake GF100LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substrate which, unlike natural micas and synthetic micas, have a completely planar and smooth surface. They are also completely transparent, giving rise to effect pigments coated with metal oxides that display high brightness, good color purity, and high chroma. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起
LA Glass Flake GF100MLA Glassflake Ltd LA Glass Flake GF100MLA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique subst...展開 LA Glass Flake GF100MLA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substrate which, unlike natural micas and synthetic micas, have a completely planar and smooth surface. They are also completely transparent, giving rise to effect pigments coated with metal oxides that display high brightness, good color purity, and high chroma. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起
Methyltriethoxysilane Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silico...展開 Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silicone resins and silicone rubber,silicone resins and silicone rubber. 收起
Methyltrimethoxysilane Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainl...展開 Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainly used as the crosslinking agent of room temperature vulcanized silicone rubber, as well as the glass fiber surface treatment agent and reinforced plastic laminate treatment agent, in order to improve the mechanical strength of products, heat resistance, moisture resistance. 收起
Modified Starch - Compound Active Printing Paste Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological pro...展開 Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起
Modified Starch - High End Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holdi...展開 Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. 收起
Modified Starch - Mid Range Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, ...展開 Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起
Moonshine® AgFlake 100-100 (GFEAGF-1100) Glassflake Ltd Moonshine® AgFlake 100-100 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 100 μm. High conductivity can be achieved at low loadings...展開 Moonshine® AgFlake 100-100 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 100 μm. High conductivity can be achieved at low loadings. Agflakes are lightweight in contrast to equivalent pure metal fillers. They may be used as both a functional and a decorative pigment. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起
Moonshine® AgFlake 100-20 (GFEAGF-1020) Glassflake Ltd Moonshine® AgFlake 100-20 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 20 μm. High conductivity can be achieved at low loadings. ...展開 Moonshine® AgFlake 100-20 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 20 μm. High conductivity can be achieved at low loadings. Agflakes are lightweight in contrast to equivalent pure metal fillers. They may be used as both a functional and a decorative pigment. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起
Moonshine® AgFlake 100-40 (GFEAGF-1040) Glassflake Ltd Moonshine® AgFlake 100-40 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 40 μm. High conductivity can be achieved at low loadings. ...展開 Moonshine® AgFlake 100-40 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 40 μm. High conductivity can be achieved at low loadings. Agflakes are lightweight in contrast to equivalent pure metal fillers. They may be used as both a functional and a decorative pigment. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起
Moonshine® AgFlake 100-60 (GFEAGF-1060) Glassflake Ltd Moonshine® AgFlake 100-60 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 60 μm. High conductivity can be achieved at low loadings. ...展開 Moonshine® AgFlake 100-60 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 60 μm. High conductivity can be achieved at low loadings. Agflakes are lightweight in contrast to equivalent pure metal fillers. They may be used as both a functional and a decorative pigment. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起
Moonshine® AgFlake 100-80 (GFEAGF-1080) Glassflake Ltd Moonshine® AgFlake 100-80 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 80 μm. High conductivity can be achieved at low loadings. ...展開 Moonshine® AgFlake 100-80 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 80 μm. High conductivity can be achieved at low loadings. Agflakes are lightweight in contrast to equivalent pure metal fillers. They may be used as both a functional and a decorative pigment. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起
Moonshine® AuFlake 500-90 (GFEAUF-5090) Glassflake Ltd Moonshine® AuFlake 500-90 are thin borosilicate glass flakes encapsulated in silver, gold, and tin oxide. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 90 μm. High conductivity can be achie...展開 Moonshine® AuFlake 500-90 are thin borosilicate glass flakes encapsulated in silver, gold, and tin oxide. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 90 μm. High conductivity can be achieved at low loadings. Agflakes are lightweight in contrast to equivalent pure metal fillers. They may be used as both a functional and a decorative pigment. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起
Moonshine® Blue Shimmer (GFEB) Glassflake Ltd Moonshine® Blue Shimmer (GFEB) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides, resulting in unique pigments that display strong interference colors combined with high t...展開 Moonshine® Blue Shimmer (GFEB) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides, resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起
Moonshine® Blue Sparkle (GFEBS) Glassflake Ltd Moonshine® Blue Sparkle (GFEBS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides, resulting in unique pigments that display strong interference colors combined with high ...展開 Moonshine® Blue Sparkle (GFEBS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides, resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起
Moonshine® Bronze Ultra Shimmer (GFEBRSU) Glassflake Ltd Moonshine® Bronze Ultra Shimmer (GFEBRSU) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides, resulting in unique pigments that display strong interference colors combined ...展開 Moonshine® Bronze Ultra Shimmer (GFEBRSU) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides, resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起
Moonshine® Colour Travel Blue-Green-Gold Shimmer (GFE-BGG) Glassflake Ltd Moonshine® Colour Travel Blue-Green-Gold Shimmer (GFE-BGG) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display...展開 Moonshine® Colour Travel Blue-Green-Gold Shimmer (GFE-BGG) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起
Moonshine® Colour Travel Blue-Green-Gold Sparkle (GFE-BGGS) Glassflake Ltd Moonshine® Colour Travel Blue-Green-Gold Sparkle (GFE-BGGS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display st...展開 Moonshine® Colour Travel Blue-Green-Gold Sparkle (GFE-BGGS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起
Moonshine® Colour Travel Blue-Green-Gold Ultra Sparkle (GFE-BGGUS) Glassflake Ltd Moonshine® Colour Travel Blue-Green-Gold Ultra Sparkle (GFE-BGGUS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that...展開 Moonshine® Colour Travel Blue-Green-Gold Ultra Sparkle (GFE-BGGUS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起
Moonshine® Colour Travel Gold-Red-Violet Shimmer (GFE-GRV) Glassflake Ltd Moonshine® Colour Travel Gold-Red-Violet Shimmer (GFE-GRV) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display...展開 Moonshine® Colour Travel Gold-Red-Violet Shimmer (GFE-GRV) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起
Moonshine® Colour Travel Gold-Red-Violet Sparkle (GFE-GRVS) Glassflake Ltd Moonshine® Colour Travel Gold-Red-Violet Sparkle (GFE-GRVS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that displa...展開 Moonshine® Colour Travel Gold-Red-Violet Sparkle (GFE-GRVS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起
Moonshine® Colour Travel Gold-Red-Violet Ultra Sparkle (GFE-GRVUS) Glassflake Ltd Moonshine® Colour Travel Gold-Red-Violet Ultra Sparkle (GFE-GRVUS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that...展開 Moonshine® Colour Travel Gold-Red-Violet Ultra Sparkle (GFE-GRVUS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起
Moonshine® Colour Travel Red-Violet-Blue Shimmer (GFE-RVB) Glassflake Ltd Moonshine® Colour Travel Red-Violet-Blue Shimmer (GFE-RVB) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display...展開 Moonshine® Colour Travel Red-Violet-Blue Shimmer (GFE-RVB) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起
Moonshine® Colour Travel Red-Violet-Blue Sparkle (GFE-RVBS) Glassflake Ltd Moonshine® Colour Travel Red-Violet-Blue Sparkle (GFE-RVBS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that displa...展開 Moonshine® Colour Travel Red-Violet-Blue Sparkle (GFE-RVBS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起
Moonshine® Colour Travel Red-Violet-Blue Ultra Sparkle (GFE-RVBUS) Glassflake Ltd Moonshine® Colour Travel Red-Violet-Blue Ultra Sparkle (GFE-RVBUS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that...展開 Moonshine® Colour Travel Red-Violet-Blue Ultra Sparkle (GFE-RVBUS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起
Moonshine® Colour Travel Violet-Blue-Green Shimmer (GFE-VBG) Glassflake Ltd Moonshine® Colour Travel Violet-Blue-Green Shimmer (GFE-VBG) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that displ...展開 Moonshine® Colour Travel Violet-Blue-Green Shimmer (GFE-VBG) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起
Moonshine® Colour Travel Violet-Blue-Green Sparkle (GFE-VBGS) Glassflake Ltd Moonshine® Colour Travel Violet-Blue-Green Sparkle (GFE-VBGS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that disp...展開 Moonshine® Colour Travel Violet-Blue-Green Sparkle (GFE-VBGS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起
Moonshine® Colour Travel Violet-Blue-Green Ultra Sparkle (GFE-VBGUS) Glassflake Ltd Moonshine® Colour Travel Violet-Blue-Green Ultra Sparkle (GFE-VBGUS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments th...展開 Moonshine® Colour Travel Violet-Blue-Green Ultra Sparkle (GFE-VBGUS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起
Moonshine® Copper Ultra Shimmer (GFECOSU) Glassflake Ltd Moonshine® Copper Ultra Shimmer (GFECOSU) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined w...展開 Moonshine® Copper Ultra Shimmer (GFECOSU) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起
Moonshine® Gold Shimmer (GFEG) Glassflake Ltd Moonshine® Gold Shimmer (GFEG) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high tr...展開 Moonshine® Gold Shimmer (GFEG) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起
Moonshine® Gold Sparkle (GFEGS) Glassflake Ltd Moonshine® Gold Sparkle (GFEGS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high t...展開 Moonshine® Gold Sparkle (GFEGS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起
Moonshine® Green Shimmer (GFEGR) Glassflake Ltd Moonshine® Green Shimmer (GFEGR) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high ...展開 Moonshine® Green Shimmer (GFEGR) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起
Moonshine® Green Sparkle (GFEGRS) Glassflake Ltd Moonshine® Green Sparkle (GFEGRS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high...展開 Moonshine® Green Sparkle (GFEGRS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起
Moonshine® Metallic Gold Ultra Shimmer (GFEMGSU) Glassflake Ltd Moonshine® Metallic Gold Ultra Shimmer (GFEMGSU) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors com...展開 Moonshine® Metallic Gold Ultra Shimmer (GFEMGSU) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起
Moonshine® Red Shimmer (GFER) Glassflake Ltd Moonshine® Red Shimmer (GFER) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high tra...展開 Moonshine® Red Shimmer (GFER) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起
Moonshine® Red Sparkle (GFERS) Glassflake Ltd Moonshine® Red Sparkle (GFERS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high tr...展開 Moonshine® Red Sparkle (GFERS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起
Moonshine® Russet Ultra Shimmer (GFERUSU) Glassflake Ltd Moonshine® Russet Ultra Shimmer (GFERUSU) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined w...展開 Moonshine® Russet Ultra Shimmer (GFERUSU) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起
Moonshine® Silver White Shimmer (GFESW) Glassflake Ltd Moonshine® Silver White Shimmer (GFESW) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined wit...展開 Moonshine® Silver White Shimmer (GFESW) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起
Moonshine® Silver White Sparkle (GFESWS) Glassflake Ltd Moonshine® Silver White Sparkle (GFESWS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined wi...展開 Moonshine® Silver White Sparkle (GFESWS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起
Moonshine® Silver White Ultra Sparkle (GFESWUS) Glassflake Ltd Moonshine® Silver White Ultra Sparkle (GFESWUS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors comb...展開 Moonshine® Silver White Ultra Sparkle (GFESWUS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起
Moonshine® Ultra Brazen Blue Shimmer (GFUEB) Glassflake Ltd Moonshine® Ultra Brazen Blue Shimmer (GFUEB) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides and colorants, resulting in unique pigments that display strong colors combi...展開 Moonshine® Ultra Brazen Blue Shimmer (GFUEB) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides and colorants, resulting in unique pigments that display strong colors combined with interference effects. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in industrial applications up to 180°C. 收起
Moonshine® Ultra Brazen Blue Sparkle (GFUEBS) Glassflake Ltd Moonshine® Ultra Brazen Blue Sparkle (GFUEBS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides and colorants, resulting in unique pigments that display strong colors comb...展開 Moonshine® Ultra Brazen Blue Sparkle (GFUEBS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides and colorants, resulting in unique pigments that display strong colors combined with interference effects. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in industrial applications up to 180°C. 收起
Moonshine® Ultra Golden Yellow Shimmer (GFUEY) Glassflake Ltd Moonshine® Ultra Golden Yellow Shimmer (GFUEY) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides and colorants, resulting in unique pigments that display strong colors com...展開 Moonshine® Ultra Golden Yellow Shimmer (GFUEY) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides and colorants, resulting in unique pigments that display strong colors combined with interference effects. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in industrial applications up to 180°C. 收起
Moonshine® Ultra Golden Yellow Sparkle (GFUEYS) Glassflake Ltd Moonshine® Ultra Golden Yellow Sparkle (GFUEYS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides and colorants, resulting in unique pigments that display strong colors co...展開 Moonshine® Ultra Golden Yellow Sparkle (GFUEYS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides and colorants, resulting in unique pigments that display strong colors combined with interference effects. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in industrial applications up to 180°C. 收起
Moonshine® Ultra Grey Shimmer (GFUEG) Glassflake Ltd Moonshine® Ultra Grey Shimmer (GFUEG) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides and colorants, resulting in unique pigments that display strong colors combined wit...展開 Moonshine® Ultra Grey Shimmer (GFUEG) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides and colorants, resulting in unique pigments that display strong colors combined with interference effects. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in industrial applications up to 180°C. 收起
Moonshine® Ultra Grey Sparkle (GFUEGS) Glassflake Ltd Moonshine® Ultra Grey Sparkle (GFUEGS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides and colorants, resulting in unique pigments that display strong colors combined wi...展開 Moonshine® Ultra Grey Sparkle (GFUEGS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides and colorants, resulting in unique pigments that display strong colors combined with interference effects. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in industrial applications up to 180°C. 收起
Moonshine® Ultra Hot Pink Shimmer (GFUEP) Glassflake Ltd Moonshine® Ultra Hot Pink Shimmer (GFUEP) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides and colorants, resulting in unique pigments that display strong colors combined...展開 Moonshine® Ultra Hot Pink Shimmer (GFUEP) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides and colorants, resulting in unique pigments that display strong colors combined with interference effects. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in industrial applications up to 180°C. 收起
Moonshine® Ultra Hot Pink Sparkle (GFUEPS) Glassflake Ltd Moonshine® Ultra Hot Pink Sparkle (GFUEPS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides and colorants, resulting in unique pigments that display strong colors combine...展開 Moonshine® Ultra Hot Pink Sparkle (GFUEPS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides and colorants, resulting in unique pigments that display strong colors combined with interference effects. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in industrial applications up to 180°C. 收起
Moonshine® Violet Shimmer (GFEV) Glassflake Ltd Moonshine® Violet Shimmer (GFEV) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high ...展開 Moonshine® Violet Shimmer (GFEV) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起
Moonshine® Violet Sparkle (GFEVS) Glassflake Ltd Moonshine® Violet Sparkle (GFEVS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high...展開 Moonshine® Violet Sparkle (GFEVS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起
N,N-Dimethyl Acrylamide (DMAA) Beijing RBL Chemicals Co., Ltd. N,N-Dimethyl Acrylamide (DMAA) is a colorless, clear liquid that is soluble in water and other ordinary organic solvents. This product can be used in adhesives, coatings, photographs and printing.
N-Vinyl-2-Caprolactam (NVCL) Beijing RBL Chemicals Co., Ltd. N-Vinyl-2-Caprolactam (NVCL) is a mixture of vinylcaprolactam and polyacrylate. This product appears as buff crystals, and can be used in inks, vinyl flooring, wood coatings, and release coatings.