UL Prospector

成功!

成功保存搜索結果
2-(2-Ethoxyethoxy) Ethylacrylate (EOEOEA) Beijing RBL Chemicals Co., Ltd. 2-(2-Ethoxyethoxy) Ethylacrylate (EOEOEA) is an acrylate monomer. This product appears as a clear liquid and has good flexibility and dilution properties. It can be used in UV-coatings for metal, wood, and in ink applications.
99.99% Conductive Shining Flake Silver Powder Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展開 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起
99.99% Conductive Silver Powder (Spherical) Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications.
Acetylated Distarch Ddipate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive.
Acetylated Distarch Phosphate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展開 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起
Acryloyl Morpholine (ACMO) Beijing RBL Chemicals Co., Ltd. Acryloyl Morpholine (ACMO) is a homopolymer that has good retention and elongation stability. This product appears as a colorless or slightly yellow, clear liquid that is soluble in various solvents. It can provide good resistance to alkali, acids, and so...展開 Acryloyl Morpholine (ACMO) is a homopolymer that has good retention and elongation stability. This product appears as a colorless or slightly yellow, clear liquid that is soluble in various solvents. It can provide good resistance to alkali, acids, and solvents, and be used in adhesives, UV printing inks, and industrial coatings. 收起
Alkylsulfonic Acid Ester of Phenol Plasticizer Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC.
Alu D1050 WHS Metapol Alu D1050 WHS, in the form of a coarse particle-sized lenticular flake, is a non-leafing aluminum pigment paste for water-based systems that can be used in decorative coatings, craft coatings, paints, architectural coatings, and textile coatings. This pr...展開 Alu D1050 WHS, in the form of a coarse particle-sized lenticular flake, is a non-leafing aluminum pigment paste for water-based systems that can be used in decorative coatings, craft coatings, paints, architectural coatings, and textile coatings. This product has been encapsulated with silicon dioxide, water-miscible solvents, and an emulsifier. Its average particle size ranges between 46-54 um. 收起
Alu D1054 Metapol Alu D1054, in the form of a coarse particle-sized lenticular flake, is a non-leafing aluminum pigment in a solvent paste that can be used in screen printing applications. This product's average particle size ranges between 52-58 um.
Alu D1054 P Metapol Alu D1054 P, in the form of a coarse particle-sized lenticular flake, is a non-leafing aluminum pigment in a mixture of aliphatic and aromatic solvent powders that can be used in decorative coatings and screen printing applications. This product's averag...展開 Alu D1054 P, in the form of a coarse particle-sized lenticular flake, is a non-leafing aluminum pigment in a mixture of aliphatic and aromatic solvent powders that can be used in decorative coatings and screen printing applications. This product's average particle size ranges between 50-58 um. 收起
Alu D1054 WH Metapol Alu D1054 WH, in the form of a coarse particle-sized lenticular flake, is a non-leafing aluminum pigment paste for water-based systems that can be used in craft coatings, decorative coatings, textile coatings, and paints. This product has been stabilized...展開 Alu D1054 WH, in the form of a coarse particle-sized lenticular flake, is a non-leafing aluminum pigment paste for water-based systems that can be used in craft coatings, decorative coatings, textile coatings, and paints. This product has been stabilized with additives, water-miscible solvents, and an emulsifier. Its average particle size ranges between 50-58 um. 收起
Alu D1070 Metapol Alu D1070, in the form of a coarse particle-sized lenticular flake, is a non-leafing aluminum pigment in a solvent paste that can be used in decorative coatings or industrial coatings. This product's average particle size ranges between 65-75 um.
Alu D1070 P Metapol Alu D1070 P, in the form of a coarse particle-sized lenticular flake, is a non-leafing aluminum pigment in a mixture of aliphatic and aromatic solvent powders that can be used in decorative coatings and screen printing applications. This product's averag...展開 Alu D1070 P, in the form of a coarse particle-sized lenticular flake, is a non-leafing aluminum pigment in a mixture of aliphatic and aromatic solvent powders that can be used in decorative coatings and screen printing applications. This product's average particle size ranges between 65-75 um. 收起
Alu D2034 Metapol Alu D2034, in the form of a particle-sized lenticular flake, is a non-leafing aluminum pigment in a solvent paste that can be used in automotive refinishes and screen printing applications. This product's average particle size ranges between 31-37 um.
Alu D2034 P Metapol Alu D2034 P, in the form of a particle-sized lenticular flake, is a non-leafing aluminum pigment in a mixture of aliphatic and aromatic solvent powders that can be used in decorative coatings and screen printing applications. This product's average parti...展開 Alu D2034 P, in the form of a particle-sized lenticular flake, is a non-leafing aluminum pigment in a mixture of aliphatic and aromatic solvent powders that can be used in decorative coatings and screen printing applications. This product's average particle size ranges between 31-37 um. 收起
Alu D2034 WH Metapol Alu D2034 WH, in the form of a particle-sized flake, is a non-leafing aluminum pigment paste for water-based systems that can be used in decorative and architectural coatings, school paints, craft coatings, and reflective coatings. This product's boiling...展開 Alu D2034 WH, in the form of a particle-sized flake, is a non-leafing aluminum pigment paste for water-based systems that can be used in decorative and architectural coatings, school paints, craft coatings, and reflective coatings. This product's boiling point ranges between 246.5-250 degrees Celsius. 收起
Alu D3023 Metapol Alu D3023, in the form of a coarse particle-sized lenticular flake, is a non-leafing aluminum pigment in a solvent paste that can be used in automotive refinishes. This product's average particle size ranges between 21-25 um.
Alu D3027 P Metapol Alu D3027 P, in the form of a particle-sized lenticular flake, is a non-leafing aluminum pigment in a mixture of aliphatic and aromatic solvent powder that can be used in decorative coatings and screen printing applications. This product's average partic...展開 Alu D3027 P, in the form of a particle-sized lenticular flake, is a non-leafing aluminum pigment in a mixture of aliphatic and aromatic solvent powder that can be used in decorative coatings and screen printing applications. This product's average particle size ranges between 25-29 um. 收起
Alu D4016 Metapol Alu D4016, in the form of a particle-sized lenticular flake, is a non-leafing aluminum pigment in a solvent paste that can be used in automotive refinishes. This product's average particle size ranges between 14-18 um.
Alu F2033 Metapol Alu F2033, in the form of a particle-sized irregular flake, is a non-leafing aluminum pigment in a solvent paste that can be used in automotive refinishes. This product's average particle size ranges between 31-35 um.
Alu F2033 P Metapol Alu F2033 P, in the form of a particle-sized irregular flake, is a non-leafing aluminum pigment in a powder mixture of aliphatic and aromatic solvents that can be used in decorative coatings and screen printing applications. This product's average partic...展開 Alu F2033 P, in the form of a particle-sized irregular flake, is a non-leafing aluminum pigment in a powder mixture of aliphatic and aromatic solvents that can be used in decorative coatings and screen printing applications. This product's average particle size ranges between 30-36 um. 收起
Alu F3022 Metapol Alu F3022, in the form of a particle-sized irregular flake, is a non-leafing aluminum pigment in a solvent paste that can be used in automotive refinishes and decorative paints. This product's average particle size ranges between 20-24 um.
Alu F3022 L Metapol Alu F3022 L, in the form of a particle-sized irregular flake with high brilliance, is a leafing aluminum pigment in a solvent paste that can be used in decorative paints, aerosols, reflective paints and to establish chrome effects. This product's average...展開 Alu F3022 L, in the form of a particle-sized irregular flake with high brilliance, is a leafing aluminum pigment in a solvent paste that can be used in decorative paints, aerosols, reflective paints and to establish chrome effects. This product's average particle diameter ranges between 20-24 um. 收起
Alu F3022 WHS Metapol Alu F3022 WHS, in the form of a particle-sized irregular flake, is a non-leafing aluminum pigment for water-based systems that can be used in decorative coatings, craft coatings, architectural coatings, textile coatings, and paints. This product has been...展開 Alu F3022 WHS, in the form of a particle-sized irregular flake, is a non-leafing aluminum pigment for water-based systems that can be used in decorative coatings, craft coatings, architectural coatings, textile coatings, and paints. This product has been encapsulated with silicon dioxide, water-miscible solvents, and an emulsifier. Its average particle size ranges between 20-24 um. 收起
Alu F3024 Metapol Alu F3024, in the form of a particle-sized irregular flake, is a non-leafing aluminum pigment in a solvent paste that can be used in automotive refinishes and decorative paints. This product's average particle size ranges between 22-26 um.
Alu F3028 Metapol Alu F3028, in the form of a particle-sized irregular flake, is a non-leafing aluminum pigment in a solvent paste that can be used in automotive refinishes. This product's average particle diameter ranges between 26-30 um.
Alu F4007 P Metapol Alu F4007 P, in the form of a particle-sized irregular flake, is a leafing aluminum pigment powder that can be used in powder coatings, flexographic or gravure printing inks, decorative coatings, reflective paints, and aerosols, among other uses. This pr...展開 Alu F4007 P, in the form of a particle-sized irregular flake, is a leafing aluminum pigment powder that can be used in powder coatings, flexographic or gravure printing inks, decorative coatings, reflective paints, and aerosols, among other uses. This product's average particle size ranges between 6-9 um. 收起
Alu F4009 Metapol Alu F4009, in the form of a particle-sized irregular flake, is a non-leafing aluminum pigment in a solvent paste that can be used in automotive refinishes and can coatings. This product's average particle diameter ranges between 9-11 um.
Alu F4009 P Metapol Alu F4009 P, in the form of a particle-sized irregular flake, is a non-leafing aluminum pigment in a mixture of aliphatic and aromatic solvent powder that can be used in decorative coatings and screen printing applications. This product's average particl...展開 Alu F4009 P, in the form of a particle-sized irregular flake, is a non-leafing aluminum pigment in a mixture of aliphatic and aromatic solvent powder that can be used in decorative coatings and screen printing applications. This product's average particle size ranges between 10-12 um. 收起
Alu F4009IPA Metapol Alu F4009IPA, in the form of a mixture, is a non-leafing aluminum pigment in a paste alcohol base that can be used in offset printing applications. This product is partially soluble in water and its apparent density ranges between 0.80-1.0 kg/L.
Alu F4010 L Metapol Alu F4010 L, in the form of a particle-sized irregular flake with high brilliance, is a leafing aluminum pigment in a solvent paste that can be used in aerosols, reflective paints, decorative paints, and to establish chrome effects. This product's averag...展開 Alu F4010 L, in the form of a particle-sized irregular flake with high brilliance, is a leafing aluminum pigment in a solvent paste that can be used in aerosols, reflective paints, decorative paints, and to establish chrome effects. This product's average particle diameter ranges between 8.5-11.5 um. 收起
Alu F4011 Metapol Alu F4011, in the form of a particle-sized irregular flake, is a non-leafing aluminum pigment in a solvent paste that can be used in automotive refinishes. This product's average particle diameter ranges between 9.5-12.5 um.
Alu F4015 Metapol Alu F4015, in the form of a particle-sized irregular flake, is a non-leafing aluminum pigment in a solvent paste that can be used in automotive refinishes. This product's average particle size ranges between 14-18 um.
Alu M1060 Metapol Alu M1060, in the form of a coarse particle-sized irregular flake, is a non-leafing aluminum pigment in a solvent paste that can be used in decorative paints. This product's average particle size ranges between 50-60 um.
Alu M2033 Metapol Alu M2033, in the form of a particle-sized irregular flake, is a non-leafing aluminum pigment in a solvent paste that can be used in automotive refinishes. This product's average particle diameter ranges between 30-36 um.
Alu M3029 Metapol Alu M3029, in the form of a particle-sized irregular flake, is a non-leafing aluminum pigment in a solvent paste that can be used in automotive refinishes. This product's average particle diameter ranges between 27-31 um.
Alu M3029 P Metapol Alu M3029 P, in the form of a particle-sized irregular flake, is a non-leafing aluminum pigment in a mixture of aliphatic and aromatic solvent powder. This product's average particle size ranges between 27-31 um.
C Glass Flake GF007/C Glassflake Ltd C Glass Flake GF007/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting i...展開 C Glass Flake GF007/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
C Glass Flake GF750/C Glassflake Ltd C Glass Flake GF750/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting i...展開 C Glass Flake GF750/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
C Glass Flake GF750MC Glassflake Ltd C Glass Flake GF750MC is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/-2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in...展開 C Glass Flake GF750MC is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/-2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
CD 008 Metapol CD 008, in the form of a particle-sized flake, is a non-leafing aluminum pigment in a dispersion of resin, aliphatic solvents, and aromatic solvents that can be used in industrial coatings, hammerfinish coatings, aerosols, and polychrome finishes. This p...展開 CD 008, in the form of a particle-sized flake, is a non-leafing aluminum pigment in a dispersion of resin, aliphatic solvents, and aromatic solvents that can be used in industrial coatings, hammerfinish coatings, aerosols, and polychrome finishes. This product's average particle size ranges between 7.8-9.5 um. 收起
CD 010 Metapol CD 010, in the form of a particle-sized flake, is a non-leafing aluminum pigment in a dispersion of resin, aliphatic solvents, and aromatic solvents that can be used in industrial coatings, hammerfinish coatings, aerosols, and polychrome finishes. This p...展開 CD 010, in the form of a particle-sized flake, is a non-leafing aluminum pigment in a dispersion of resin, aliphatic solvents, and aromatic solvents that can be used in industrial coatings, hammerfinish coatings, aerosols, and polychrome finishes. This product's average particle size ranges between 9.8-12 um. 收起
CD 017 Metapol CD 017, in the form of a particle-sized flake, is a non-leafing aluminum pigment in a dispersion of resin, aliphatic solvents, and aromatic solvents that can be used in industrial coatings, hammerfinish coatings, aerosols, and polychrome finishes. This p...展開 CD 017, in the form of a particle-sized flake, is a non-leafing aluminum pigment in a dispersion of resin, aliphatic solvents, and aromatic solvents that can be used in industrial coatings, hammerfinish coatings, aerosols, and polychrome finishes. This product's average particle size ranges between 17-18 um. 收起
CD 025 Metapol CD 025, in the form of a particle-sized flake, is a non-leafing aluminum pigment in a dispersion of resin, aliphatic solvents, and aromatic solvents that can be used in industrial coatings, hammerfinish coatings, aerosols, and polychrome finishes. This p...展開 CD 025, in the form of a particle-sized flake, is a non-leafing aluminum pigment in a dispersion of resin, aliphatic solvents, and aromatic solvents that can be used in industrial coatings, hammerfinish coatings, aerosols, and polychrome finishes. This product's average particle size ranges between 20-24 um. 收起
CD 1525 Metapol CD 1525, in the form of a particle-sized flake, is a leafing aluminum pigment in a dispersion of resin, aliphatic solvents, and aromatic solvents that can be used in decorative coatings, industrial coatings, aerosols, roof coatings, and reflective paints....展開 CD 1525, in the form of a particle-sized flake, is a leafing aluminum pigment in a dispersion of resin, aliphatic solvents, and aromatic solvents that can be used in decorative coatings, industrial coatings, aerosols, roof coatings, and reflective paints. This product's average particle size ranges between 20-24 um. 收起
CD 1525 WH Metapol CD 1525 WH, in the form of a particle-sized flake, is an aluminum pigment in a water based paste that can be used in craft coatings, decorative coatings, and textile printing applications. This product has been stabilized with additives, water-miscible s...展開 CD 1525 WH, in the form of a particle-sized flake, is an aluminum pigment in a water based paste that can be used in craft coatings, decorative coatings, and textile printing applications. This product has been stabilized with additives, water-miscible solvents, and an emulsifier and is designed for neutral or slightly basic systems. Its average particle diameter ranges between 20-24 um. 收起
CD 1917 Metapol CD 1917, in the form of a particle-sized flake, is a leafing aluminum pigment in a dispersion of resin, aliphatic solvents, and aromatic solvents that can be used in decorative coatings, industrial coatings, aerosols, roof coatings, and reflective coating...展開 CD 1917, in the form of a particle-sized flake, is a leafing aluminum pigment in a dispersion of resin, aliphatic solvents, and aromatic solvents that can be used in decorative coatings, industrial coatings, aerosols, roof coatings, and reflective coatings. This product's average particle size ranges between 17-18 um. 收起
CD 1917 WH Metapol CD 1917 WH, in the form of a particle-sized flake, is an aluminum pigment in a water-based paint that can be used in craft coatings, school coatings, and textile printing applications. This product has been stabilized with additives, water-miscible solve...展開 CD 1917 WH, in the form of a particle-sized flake, is an aluminum pigment in a water-based paint that can be used in craft coatings, school coatings, and textile printing applications. This product has been stabilized with additives, water-miscible solvents, and an emulsifier. Its average particle diameter ranges between 17-18 um. This product is designed for neutral or slightly basic systems. 收起
CD 2410 Metapol CD 2410, in the form of a particle-sized flake, is a leafing aluminum pigment in a dispersion of resin, aromatic solvents, and aliphatic solvents that can be used in decorative coatings, reflective coatings, aerosols, roof coatings, and industrial coating...展開 CD 2410, in the form of a particle-sized flake, is a leafing aluminum pigment in a dispersion of resin, aromatic solvents, and aliphatic solvents that can be used in decorative coatings, reflective coatings, aerosols, roof coatings, and industrial coatings. This product's apparent density ranges between 1.18-1.3 kg/L. 收起
CD 2410 WH Metapol CD 2410 WH, in the form of a particle-sized flake, is an aluminum pigment in a water-based paint that can be used in gravure printing inks, flexographic printing inks, and decorative coatings. This product has been stabilized with additives, water-miscib...展開 CD 2410 WH, in the form of a particle-sized flake, is an aluminum pigment in a water-based paint that can be used in gravure printing inks, flexographic printing inks, and decorative coatings. This product has been stabilized with additives, water-miscible solvents, and an emulsifier. Its average particle diameter ranges between 9.8-12 um. This product is designed for neutral or slightly basic systems. 收起
CD 3008 Metapol CD 3008, in the form of a particle-sized flake, is a leafing aluminum pigment in a dispersion of resin, aliphatic solvents, and aromatic solvents that can be used in decorative coatings, industrial coatings, aerosols, and paper coatings. This product's a...展開 CD 3008, in the form of a particle-sized flake, is a leafing aluminum pigment in a dispersion of resin, aliphatic solvents, and aromatic solvents that can be used in decorative coatings, industrial coatings, aerosols, and paper coatings. This product's average particle size ranges between 7.8-9.5 um. 收起
CD 3008 WH Metapol CD 3008 WH, in the form of a particle-sized flake, is an aluminum pigment in a water-based paint that can be used in gravure printing inks and flexographic printing inks. This product has been stabilized with additives, water-miscible solvents, and an em...展開 CD 3008 WH, in the form of a particle-sized flake, is an aluminum pigment in a water-based paint that can be used in gravure printing inks and flexographic printing inks. This product has been stabilized with additives, water-miscible solvents, and an emulsifier. Its average particle diameter ranges between 7.8-9.5 um. 收起
Cardanol Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...展開 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. 收起
Copper B 4555 Metapol Copper B 4555, in the form of a particle-sized brilliant flake, is a copper pigment that can be used in decorative coatings, paper coatings, craft coatings, aerosols, and screen printing applications. This product's average particle diameter ranges betwe...展開 Copper B 4555, in the form of a particle-sized brilliant flake, is a copper pigment that can be used in decorative coatings, paper coatings, craft coatings, aerosols, and screen printing applications. This product's average particle diameter ranges between 38-40 um and its apparent density is no more than 1.05 kg/L. 收起
Copper B 5565 Metapol Copper B 6565, in the form of a particle-sized brilliant flake, is a copper pigment that can be used in decorative coatings, paper coatings, craft coatings, screen printing applications, and in aerosols. This product's average particle diameter ranges be...展開 Copper B 6565, in the form of a particle-sized brilliant flake, is a copper pigment that can be used in decorative coatings, paper coatings, craft coatings, screen printing applications, and in aerosols. This product's average particle diameter ranges between 33-37 um and its apparent density is no more than 1.00 kg/L. 收起
Copper Hydropaste B 4555 Metapol Copper Hydropaste B 4555, in the form of a particle-sized brilliant flake, is a copper pigment in a water-based paste that can be used in decorative coatings, craft coatings, paints, textile coatings, and paper coatings. This product is dispersible in wa...展開 Copper Hydropaste B 4555, in the form of a particle-sized brilliant flake, is a copper pigment in a water-based paste that can be used in decorative coatings, craft coatings, paints, textile coatings, and paper coatings. This product is dispersible in water-based systems for in situ applications. Its average particle diameter ranges between 38-40 um, and it contains between 83-87% metals. 收起
Copper Hydropaste R 7080 Metapol Copper Hydropaste R 7080, in the form of a particle-sized flake with hiding power, is a copper pigment in a water-based paste that can be used in paper coatings, decorative coatings, craft coatings, and textile coatings. This product is dispersible in wa...展開 Copper Hydropaste R 7080, in the form of a particle-sized flake with hiding power, is a copper pigment in a water-based paste that can be used in paper coatings, decorative coatings, craft coatings, and textile coatings. This product is dispersible in water-based systems for in-situ applications. Its average particle diameter ranges between 18-22 um, and it contains between 83-87% metals. 收起
Copper Meta R 8090 Metapol Copper Meta R 8090, in the form of a particle-sized brilliant flake, is a copper pigment in a paste solvent base that can be used in paper coatings, decorative coatings, aerosols, and craft coatings. This product is a mixture of aliphatic and aromatic so...展開 Copper Meta R 8090, in the form of a particle-sized brilliant flake, is a copper pigment in a paste solvent base that can be used in paper coatings, decorative coatings, aerosols, and craft coatings. This product is a mixture of aliphatic and aromatic solvents in a resin that protects the flakes' metallic brightness. Its average particle diameter ranges between 13-19 um, and it contains between 83-87% metals. 收起
Copper Meta U 2530 Metapol Copper Meta U 2530, in the form of a particle-sized brilliant flake, is a copper-zinc alloy of a copper pigment in a paste solvent base that can be used in paper coatings, craft coatings, decorative coatings, and aerosols. This product is a mixture of al...展開 Copper Meta U 2530, in the form of a particle-sized brilliant flake, is a copper-zinc alloy of a copper pigment in a paste solvent base that can be used in paper coatings, craft coatings, decorative coatings, and aerosols. This product is a mixture of aliphatic and aromatic solvents in a resin that protects the flakes' metallic brightness. Its average particle diameter ranges between 50-53 um, and it contains between 83-87% metals. 收起
Copper R 7080 Metapol Copper R 7080, in the form of a particle-sized brilliant flake, is a copper pigment that can be used in decorative coatings, paper coatings, screen printing applications, industrial coatings, and aerosols. This product's average particle diameter ranges ...展開 Copper R 7080, in the form of a particle-sized brilliant flake, is a copper pigment that can be used in decorative coatings, paper coatings, screen printing applications, industrial coatings, and aerosols. This product's average particle diameter ranges between 20-24 um and its apparent density is no more than 0.95 kg/L. 收起
Copper R 8090 Metapol Copper R 8090, in the form of a particle-sized brilliant flake, is a copper pigment that can be used in decorative coatings, paper coatings, screen printing applications, industrial coatings, and aerosols. This product's average particle diameter ranges ...展開 Copper R 8090, in the form of a particle-sized brilliant flake, is a copper pigment that can be used in decorative coatings, paper coatings, screen printing applications, industrial coatings, and aerosols. This product's average particle diameter ranges between 13-19 um and its apparent density is no more than 0.75 kg/L. 收起
Copper U 2530 Metapol Copper U 2530, in the form of a particle-sized brilliant flake, is a copper pigment that can be used in decorative coatings, paper coatings, textile coatings, craft coatings, and screen printing applications. Its average particle diameter ranges between ...展開 Copper U 2530, in the form of a particle-sized brilliant flake, is a copper pigment that can be used in decorative coatings, paper coatings, textile coatings, craft coatings, and screen printing applications. Its average particle diameter ranges between 50-53 um and its apparent density is no more than 1.15 kg/L. 收起
Deep Gold 7600 Metapol Deep Gold 7600, in the form of a particle-sized brilliant flake, is a copper-zinc alloy that can be used as a bronze pigment in decorative lakes, craft coatings, aerosols, and screen printing applications. This product's average particle diameter ranges ...展開 Deep Gold 7600, in the form of a particle-sized brilliant flake, is a copper-zinc alloy that can be used as a bronze pigment in decorative lakes, craft coatings, aerosols, and screen printing applications. This product's average particle diameter ranges between 18-20 um, and its apparent density is no more than 0.90 kg/L. 收起
Dipropylene Glycol Diacrylate (DPGDA) Beijing RBL Chemicals Co., Ltd. Dipropylene Glycol Diacrylate (DPGDA) is an acrylate monomer that has low viscosity, low volatility, fast curing, and good dilution. This product appears as a clear liquid, and it can be used in adhesives, inks, and coatings.
Ducat R 7080 Metapol Ducat R 7080, in the form of a particle-sized brilliant flake, is a copper-zinc alloy that can be used as a bronze pigment in decorative coatings, paper coatings, screen printing applications, and in aerosols. This product's average particle diameter ran...展開 Ducat R 7080, in the form of a particle-sized brilliant flake, is a copper-zinc alloy that can be used as a bronze pigment in decorative coatings, paper coatings, screen printing applications, and in aerosols. This product's average particle diameter ranges between 20-25 um, and its apparent density is no more than 1.0 kg/L. 收起
Ducat U 2530 Metapol Ducat U 2530, in the form of a particle-sized brilliant flake, is a copper-zinc alloy that can be used as a bronze pigment in decorative coatings, craft coatings, textile coatings, screen printing applications, and aerosols. This product's average partic...展開 Ducat U 2530, in the form of a particle-sized brilliant flake, is a copper-zinc alloy that can be used as a bronze pigment in decorative coatings, craft coatings, textile coatings, screen printing applications, and aerosols. This product's average particle diameter ranges between 50-53 um, and its apparent density is no more than 1.15 kg/L. 收起
ECR Glass Flake GF001 Glassflake Ltd ECR Glass Flake GF001 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF001 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF002 Glassflake Ltd ECR Glass Flake GF002 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.3 - 2.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF002 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.3 - 2.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF003 Glassflake Ltd ECR Glass Flake GF003 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 2.3 - 3.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF003 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 2.3 - 3.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF005 Glassflake Ltd ECR Glass Flake GF005 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties ...展開 ECR Glass Flake GF005 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF007 Glassflake Ltd ECR Glass Flake GF007 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF007 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF100M (Milled) Glassflake Ltd ECR Glass Flake GF100M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF100M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF100M (Unmilled) Glassflake Ltd ECR Glass Flake GF100 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展開 ECR Glass Flake GF100 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF100nm (Unmilled) Glassflake Ltd ECR Glass Flake GF100nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF100nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF100nmM (Milled) Glassflake Ltd ECR Glass Flake GF100nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF100nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF350nm (Unmilled) Glassflake Ltd ECR Glass Flake GF350nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF350nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF350nmM (Milled) Glassflake Ltd ECR Glass Flake GF350nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF350nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF500M (Milled) Glassflake Ltd ECR Glass Flake GF500M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF500M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF500M (Unmilled) Glassflake Ltd ECR Glass Flake GF500 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展開 ECR Glass Flake GF500 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF500nm (Unmilled) Glassflake Ltd ECR Glass Flake GF500nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF500nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF500nmM (Milled) Glassflake Ltd ECR Glass Flake GF500nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF500nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF750M (Milled) Glassflake Ltd ECR Glass Flake GF750 (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF750 (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF750M (Unmilled) Glassflake Ltd ECR Glass Flake GF750 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展開 ECR Glass Flake GF750 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF750nm (Unmilled) Glassflake Ltd ECR Glass Flake GF750nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF750nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF750nmM (Milled) Glassflake Ltd ECR Glass Flake GF750nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF750nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
English Green U 2530 Metapol English Green U 2530, in the form of a particle-sized brilliant flake, is a copper-zinc alloy that can be used as a bronze pigment in decorative coatings, textile coatings, screen printing applications, aerosols, and craft coatings. This product's averag...展開 English Green U 2530, in the form of a particle-sized brilliant flake, is a copper-zinc alloy that can be used as a bronze pigment in decorative coatings, textile coatings, screen printing applications, aerosols, and craft coatings. This product's average particle diameter ranges between 48-52 um, and its apparent density is no more than 1.15 kg/L. 收起
Fire Red U 2530 Metapol Fire Red U 2530, in the form of a particle-sized brilliant flake, is a copper pigment that can be used in decorative coatings, textile coatings, screen printing applications, and craft coatings. This product's average particle diameter ranges between 50-...展開 Fire Red U 2530, in the form of a particle-sized brilliant flake, is a copper pigment that can be used in decorative coatings, textile coatings, screen printing applications, and craft coatings. This product's average particle diameter ranges between 50-53 um, and its apparent density is no more than 1.15 kg/L. 收起
Fumed Silica Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....展開 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 收起
Gap 2 EB Metapol Gap 2 EB, in the form of a particle-sized bright flake, is a leafing aluminum pigment in an aliphatic solvent paste that can be used in reflective coatings and for chrome effects. This product's average particle diameter ranges between 20-24 um.
Gap 2 NL Metapol Gap 2 NL, in the form of a particle-sized flake, is a non-leafing aluminum pigment in an aliphatic solvent paste that can be used in industrial coatings, hammerfinish coatings, decorative coatings, aerosols, and polychrome finishes. This product's averag...展開 Gap 2 NL, in the form of a particle-sized flake, is a non-leafing aluminum pigment in an aliphatic solvent paste that can be used in industrial coatings, hammerfinish coatings, decorative coatings, aerosols, and polychrome finishes. This product's average particle diameter ranges between 20-24 um. 收起
Gap 3 NL Metapol Gap 3 NL, in the form of a particle-sized flake, is a non-leafing aluminum pigment in an aliphatic solvent paste that can be used in industrial coatings, hammerfinish coatings, decorative coatings, aerosols, and polychrome finishes. This product's averag...展開 Gap 3 NL, in the form of a particle-sized flake, is a non-leafing aluminum pigment in an aliphatic solvent paste that can be used in industrial coatings, hammerfinish coatings, decorative coatings, aerosols, and polychrome finishes. This product's average particle diameter ranges between 17-18 um. 收起
Gap 4 EB Metapol Gap 4 EB, in the form of a particle-sized bright flake, is a leafing aluminum pigment in an aliphatic solvent paste that can be used in reflective coatings and for chrome effects. This product's average particle diameter ranges between 9.8-12 um.
Gap 4 NL Metapol Gap 4 NL, in the form of a particle-sized aluminum flake, is a non-leafing aluminum pigment in an aliphatic solvent paste that can be used in industrial coatings, hammerfinish coatings, decorative coatings, aerosols, and polychrome finishes. This product...展開 Gap 4 NL, in the form of a particle-sized aluminum flake, is a non-leafing aluminum pigment in an aliphatic solvent paste that can be used in industrial coatings, hammerfinish coatings, decorative coatings, aerosols, and polychrome finishes. This product's average particle size ranges between 9.8-12 um. 收起
Gap 495 Metapol Gap 495, in the form of a particle-sized flake, is a leafing aluminum pigment in an aliphatic solvent powder that can be used in flexographic printing inks and in powder coatings. This product's average particle diameter ranges between 9.8-12 um.
Gap 8 EB Metapol Gap 8 EB, in the form of a particle-sized bright flake, is a leafing aluminum pigment in an aliphatic solvent paste that can be used in reflective coatings and for chrome effects. This product's average particle diameter ranges between 7.8-9.5 um.
Gap 8 NL Metapol Gap 8 NL, in the form of a particle-sized aluminum flake, is a non-leafing aluminum pigment in an aliphatic solvent paste that can be used in industrial coatings, hammerfinish coatings, flexographic printing inks, aerosols, and polychrome finishes. This ...展開 Gap 8 NL, in the form of a particle-sized aluminum flake, is a non-leafing aluminum pigment in an aliphatic solvent paste that can be used in industrial coatings, hammerfinish coatings, flexographic printing inks, aerosols, and polychrome finishes. This product's average particle diameter ranges between 7.8-9.5 um. 收起
Gap 880 Metapol Gap 880, in the form of a particle-sized flake, is a non-leafing aluminum pigment in an aliphatic solvent paste that can be used in industrial coatings, hammerfinish coatings, aerosols, and powder coatings. This product's average particle diameter ranges...展開 Gap 880, in the form of a particle-sized flake, is a non-leafing aluminum pigment in an aliphatic solvent paste that can be used in industrial coatings, hammerfinish coatings, aerosols, and powder coatings. This product's average particle diameter ranges between 7.8-9.5 um. 收起
Gap 895 Metapol Gap 895, in the form of a particle-sized flake, is a leafing aluminum pigment in an aliphatic solvent powder that can be used in powder coatings and inks. This product's average particle diameter ranges between 7.8-9.5 um.
H0201 Long Kou Windstar Chemical Co., Ltd. H0201 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0301 Long Kou Windstar Chemical Co., Ltd. H0301 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.