UL Prospector

成功!

成功保存搜索結果
2-(2-Ethoxyethoxy) Ethylacrylate (EOEOEA) Beijing RBL Chemicals Co., Ltd. 2-(2-Ethoxyethoxy) Ethylacrylate (EOEOEA) is an acrylate monomer. This product appears as a clear liquid and has good flexibility and dilution properties. It can be used in UV-coatings for metal, wood, and in ink applications.
99.99% Conductive Shining Flake Silver Powder Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展開 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起
99.99% Conductive Silver Powder (Spherical) Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications.
Acetylated Distarch Ddipate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive.
Acetylated Distarch Phosphate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展開 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起
Acryloyl Morpholine (ACMO) Beijing RBL Chemicals Co., Ltd. Acryloyl Morpholine (ACMO) is a homopolymer that has good retention and elongation stability. This product appears as a colorless or slightly yellow, clear liquid that is soluble in various solvents. It can provide good resistance to alkali, acids, and so...展開 Acryloyl Morpholine (ACMO) is a homopolymer that has good retention and elongation stability. This product appears as a colorless or slightly yellow, clear liquid that is soluble in various solvents. It can provide good resistance to alkali, acids, and solvents, and be used in adhesives, UV printing inks, and industrial coatings. 收起
Alkylsulfonic Acid Ester of Phenol Plasticizer Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC.
C Glass Flake GF007/C Glassflake Ltd C Glass Flake GF007/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting i...展開 C Glass Flake GF007/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
C Glass Flake GF750/C Glassflake Ltd C Glass Flake GF750/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting i...展開 C Glass Flake GF750/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
C Glass Flake GF750MC Glassflake Ltd C Glass Flake GF750MC is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/-2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in...展開 C Glass Flake GF750MC is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/-2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
Cardanol Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...展開 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. 收起
Dipropylene Glycol Diacrylate (DPGDA) Beijing RBL Chemicals Co., Ltd. Dipropylene Glycol Diacrylate (DPGDA) is an acrylate monomer that has low viscosity, low volatility, fast curing, and good dilution. This product appears as a clear liquid, and it can be used in adhesives, inks, and coatings.
ECR Glass Flake GF001 Glassflake Ltd ECR Glass Flake GF001 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF001 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF002 Glassflake Ltd ECR Glass Flake GF002 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.3 - 2.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF002 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.3 - 2.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF003 Glassflake Ltd ECR Glass Flake GF003 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 2.3 - 3.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF003 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 2.3 - 3.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF005 Glassflake Ltd ECR Glass Flake GF005 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties ...展開 ECR Glass Flake GF005 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF007 Glassflake Ltd ECR Glass Flake GF007 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF007 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF100M (Milled) Glassflake Ltd ECR Glass Flake GF100M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF100M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF100M (Unmilled) Glassflake Ltd ECR Glass Flake GF100 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展開 ECR Glass Flake GF100 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF100nm (Unmilled) Glassflake Ltd ECR Glass Flake GF100nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF100nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF100nmM (Milled) Glassflake Ltd ECR Glass Flake GF100nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF100nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF350nm (Unmilled) Glassflake Ltd ECR Glass Flake GF350nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF350nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF350nmM (Milled) Glassflake Ltd ECR Glass Flake GF350nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF350nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF500M (Milled) Glassflake Ltd ECR Glass Flake GF500M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF500M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF500M (Unmilled) Glassflake Ltd ECR Glass Flake GF500 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展開 ECR Glass Flake GF500 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF500nm (Unmilled) Glassflake Ltd ECR Glass Flake GF500nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF500nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF500nmM (Milled) Glassflake Ltd ECR Glass Flake GF500nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF500nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF750M (Milled) Glassflake Ltd ECR Glass Flake GF750 (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF750 (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF750M (Unmilled) Glassflake Ltd ECR Glass Flake GF750 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展開 ECR Glass Flake GF750 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF750nm (Unmilled) Glassflake Ltd ECR Glass Flake GF750nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF750nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF750nmM (Milled) Glassflake Ltd ECR Glass Flake GF750nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF750nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
Fumed Silica Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....展開 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 收起
H0201 Long Kou Windstar Chemical Co., Ltd. H0201 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0301 Long Kou Windstar Chemical Co., Ltd. H0301 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0601 Long Kou Windstar Chemical Co., Ltd. H0601 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0801 Long Kou Windstar Chemical Co., Ltd. H0801 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0806 Long Kou Windstar Chemical Co., Ltd. H0806 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0901 Long Kou Windstar Chemical Co., Ltd. H0901 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0902 Long Kou Windstar Chemical Co., Ltd. H0902 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0903 Long Kou Windstar Chemical Co., Ltd. H0903 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0904 Long Kou Windstar Chemical Co., Ltd. H0904 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0905 Long Kou Windstar Chemical Co., Ltd. H0905 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0906 Long Kou Windstar Chemical Co., Ltd. H0906 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
Hydroxypropyl Aistarch Phosphate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive.
JH-WD 2003V Jeco Pigment (USA), Inc. JH-WD 2003V is a pre-liquid dispersion preparation that has a color index P.V.3 and takes acrylic acid resin as the carrier with low viscosity, high strength, and bright color. This product has common applications in paper coating, water-based printing in...展開 JH-WD 2003V is a pre-liquid dispersion preparation that has a color index P.V.3 and takes acrylic acid resin as the carrier with low viscosity, high strength, and bright color. This product has common applications in paper coating, water-based printing ink, and more. 收起
JH-WD 2007BK Jeco Pigment (USA), Inc. JH-WD 2007BK is a pre-liquid dispersion preparation that has a color index P.Bk.7 and takes acrylic acid resin as the carrier with low viscosity, high strength, and bright color. This product has common applications in paper coating, water-based printing ...展開 JH-WD 2007BK is a pre-liquid dispersion preparation that has a color index P.Bk.7 and takes acrylic acid resin as the carrier with low viscosity, high strength, and bright color. This product has common applications in paper coating, water-based printing ink, and more. 收起
JH-WD 2007G Jeco Pigment (USA), Inc. JH-WD 2007G is a pre-liquid dispersion preparation that has a color index P.G.7 and takes acrylic acid resin as the carrier with low viscosity, high strength, and bright color. This product has common applications in paper coating, water-based printing in...展開 JH-WD 2007G is a pre-liquid dispersion preparation that has a color index P.G.7 and takes acrylic acid resin as the carrier with low viscosity, high strength, and bright color. This product has common applications in paper coating, water-based printing ink, and more. 收起
JH-WD 2014Y Jeco Pigment (USA), Inc. JH-WD 2014Y is a pre-liquid dispersion preparation that has a color index P.Y.14 and takes acrylic acid resin as the carrier with low viscosity, high strength, and bright color. This product has common applications in paper coating, water-based printing i...展開 JH-WD 2014Y is a pre-liquid dispersion preparation that has a color index P.Y.14 and takes acrylic acid resin as the carrier with low viscosity, high strength, and bright color. This product has common applications in paper coating, water-based printing ink, and more. 收起
JH-WD 2023VR Jeco Pigment (USA), Inc. JH-WD 2023VR is a pre-liquid dispersion preparation that has a color index P.V.23 and takes acrylic acid resin as the carrier with low viscosity, high strength, and bright color. This product has common applications in paper coating, water-based printing ...展開 JH-WD 2023VR is a pre-liquid dispersion preparation that has a color index P.V.23 and takes acrylic acid resin as the carrier with low viscosity, high strength, and bright color. This product has common applications in paper coating, water-based printing ink, and more. 收起
JH-WD 2027V Jeco Pigment (USA), Inc. JH-WD 2027V is a pre-liquid dispersion preparation that has a color index P.V.27 and takes acrylic acid resin as the carrier with low viscosity, high strength, and bright color. This product has common applications in paper coating, water-based printing i...展開 JH-WD 2027V is a pre-liquid dispersion preparation that has a color index P.V.27 and takes acrylic acid resin as the carrier with low viscosity, high strength, and bright color. This product has common applications in paper coating, water-based printing ink, and more. 收起
JH-WD 2083Y Jeco Pigment (USA), Inc. JH-WD 2083Y is a pre-liquid dispersion preparation that has a color index P.Y.83 and takes acrylic acid resin as the carrier with low viscosity, high strength, and bright color. This product has common applications in paper coating, water-based printing i...展開 JH-WD 2083Y is a pre-liquid dispersion preparation that has a color index P.Y.83 and takes acrylic acid resin as the carrier with low viscosity, high strength, and bright color. This product has common applications in paper coating, water-based printing ink, and more. 收起
JH-WD 2150B Jeco Pigment (USA), Inc. JH-WD 2150B is a pre-liquid dispersion preparation that has a color index P.B.15:0 and takes acrylic acid resin as the carrier with low viscosity, high strength, and bright color. This product has common applications in paper coating, water-based printing...展開 JH-WD 2150B is a pre-liquid dispersion preparation that has a color index P.B.15:0 and takes acrylic acid resin as the carrier with low viscosity, high strength, and bright color. This product has common applications in paper coating, water-based printing ink, and more. 收起
JH-WD 2153B Jeco Pigment (USA), Inc. JH-WD 2153B is a pre-liquid dispersion preparation that has a color index P.B.15:3 and takes acrylic acid resin as the carrier with low viscosity, high strength, and bright color. This product has common applications in paper coating, water-based printing...展開 JH-WD 2153B is a pre-liquid dispersion preparation that has a color index P.B.15:3 and takes acrylic acid resin as the carrier with low viscosity, high strength, and bright color. This product has common applications in paper coating, water-based printing ink, and more. 收起
JH-WD 2531R Jeco Pigment (USA), Inc. JH-WD 2531R is a pre-liquid dispersion preparation that has a color index P.R.53:1 and takes acrylic acid resin as the carrier with low viscosity, high strength, and bright color. This product has common applications in paper coating, water-based printing...展開 JH-WD 2531R is a pre-liquid dispersion preparation that has a color index P.R.53:1 and takes acrylic acid resin as the carrier with low viscosity, high strength, and bright color. This product has common applications in paper coating, water-based printing ink, and more. 收起
JH-WD 2571R Jeco Pigment (USA), Inc. JH-WD 2571R is a pre-liquid dispersion preparation that has a color index P.R.57:1 and takes acrylic acid resin as the carrier with low viscosity, high strength, and bright color. This product has common applications in paper coating, water-based printing...展開 JH-WD 2571R is a pre-liquid dispersion preparation that has a color index P.R.57:1 and takes acrylic acid resin as the carrier with low viscosity, high strength, and bright color. This product has common applications in paper coating, water-based printing ink, and more. 收起
JWD-2001Y Jeco Pigment (USA), Inc. JWD-2001Y is a water-based universal pigment pre-liquid dispersion preparation with uniform particle size distribution, good fluidity, and is easily dispersed into water-based polymer emulsions. This product has a color index P.Y.1 and is applicable in em...展開 JWD-2001Y is a water-based universal pigment pre-liquid dispersion preparation with uniform particle size distribution, good fluidity, and is easily dispersed into water-based polymer emulsions. This product has a color index P.Y.1 and is applicable in emulsion paint, interior and exterior wall coatings, ink colorants, and water-based industrial paints. 收起
JWD-2003Y Jeco Pigment (USA), Inc. JWD-2003Y is a water-based universal pigment pre-liquid dispersion preparation with uniform particle size distribution, good fluidity, and is easily dispersed into water-based polymer emulsions. This product has a color index P.Y.3 and is applicable in em...展開 JWD-2003Y is a water-based universal pigment pre-liquid dispersion preparation with uniform particle size distribution, good fluidity, and is easily dispersed into water-based polymer emulsions. This product has a color index P.Y.3 and is applicable in emulsion paint, interior and exterior wall coatings, ink colorants, and water-based industrial paints. 收起
JWD-2007BK Jeco Pigment (USA), Inc. JWD-2007BK is a water-based universal pigment pre-liquid dispersion preparation with uniform particle size distribution, good fluidity, and is easily dispersed into water-based polymer emulsions. This product has a color index P.Bk.7 and is applicable in ...展開 JWD-2007BK is a water-based universal pigment pre-liquid dispersion preparation with uniform particle size distribution, good fluidity, and is easily dispersed into water-based polymer emulsions. This product has a color index P.Bk.7 and is applicable in emulsion paint, interior and exterior wall coatings, ink colorants, and water-based industrial paints. 收起
JWD-2007BKL Jeco Pigment (USA), Inc. JWD-2007BKL is a water-based universal pigment pre-liquid dispersion preparation with uniform particle size distribution, good fluidity, and is easily dispersed into water-based polymer emulsions. This product has a color index P.Bk.7 and is applicable in...展開 JWD-2007BKL is a water-based universal pigment pre-liquid dispersion preparation with uniform particle size distribution, good fluidity, and is easily dispersed into water-based polymer emulsions. This product has a color index P.Bk.7 and is applicable in emulsion paint, interior and exterior wall coatings, ink colorants, and water-based industrial paints. 收起
JWD-2007G Jeco Pigment (USA), Inc. JWD-2007G is a water-based universal pigment pre-liquid dispersion preparation with uniform particle size distribution, good fluidity, and is easily dispersed into water-based polymer emulsions. This product has a color index P.G.7 and is applicable in em...展開 JWD-2007G is a water-based universal pigment pre-liquid dispersion preparation with uniform particle size distribution, good fluidity, and is easily dispersed into water-based polymer emulsions. This product has a color index P.G.7 and is applicable in emulsion paint, interior and exterior wall coatings, ink colorants, and water-based industrial paints. 收起
JWD-2019VR Jeco Pigment (USA), Inc. JWD-2019VR is a water-based universal pigment pre-liquid dispersion preparation with uniform particle size distribution, good fluidity, and is easily dispersed into water-based polymer emulsions. This product has a color index P.V.19 and is applicable in ...展開 JWD-2019VR is a water-based universal pigment pre-liquid dispersion preparation with uniform particle size distribution, good fluidity, and is easily dispersed into water-based polymer emulsions. This product has a color index P.V.19 and is applicable in emulsion paint, interior and exterior wall coatings, ink colorants, and water-based industrial paints. 收起
JWD-2023VR Jeco Pigment (USA), Inc. JWD-2023VR is a water-based universal pigment pre-liquid dispersion preparation with uniform particle size distribution, good fluidity, and is easily dispersed into water-based polymer emulsions. This product has a color index P.V.23 and is applicable in ...展開 JWD-2023VR is a water-based universal pigment pre-liquid dispersion preparation with uniform particle size distribution, good fluidity, and is easily dispersed into water-based polymer emulsions. This product has a color index P.V.23 and is applicable in emulsion paint, interior and exterior wall coatings, ink colorants, and water-based industrial paints. 收起
JWD-2036O Jeco Pigment (USA), Inc. JWD-2036O is a water-based universal pigment pre-liquid dispersion preparation with uniform particle size distribution, good fluidity, and is easily dispersed into water-based polymer emulsions. This product has a color index P.O.36 and is applicable in e...展開 JWD-2036O is a water-based universal pigment pre-liquid dispersion preparation with uniform particle size distribution, good fluidity, and is easily dispersed into water-based polymer emulsions. This product has a color index P.O.36 and is applicable in emulsion paint, interior and exterior wall coatings, ink colorants, and water-based industrial paints. 收起
JWD-2073O Jeco Pigment (USA), Inc. JWD-2073O is a water-based universal pigment pre-liquid dispersion preparation with uniform particle size distribution, good fluidity, and is easily dispersed into water-based polymer emulsions. This product has a color index P.O.73 and is applicable in e...展開 JWD-2073O is a water-based universal pigment pre-liquid dispersion preparation with uniform particle size distribution, good fluidity, and is easily dispersed into water-based polymer emulsions. This product has a color index P.O.73 and is applicable in emulsion paint, interior and exterior wall coatings, ink colorants, and water-based industrial paints. 收起
JWD-2074YD Jeco Pigment (USA), Inc. JWD-2074YD is a water-based universal pigment pre-liquid dispersion preparation with uniform particle size distribution, good fluidity, and is easily dispersed into water-based polymer emulsions. This product has a color index P.Y.74 and is applicable in ...展開 JWD-2074YD is a water-based universal pigment pre-liquid dispersion preparation with uniform particle size distribution, good fluidity, and is easily dispersed into water-based polymer emulsions. This product has a color index P.Y.74 and is applicable in emulsion paint, interior and exterior wall coatings, ink colorants, and water-based industrial paints. 收起
JWD-2083Y Jeco Pigment (USA), Inc. JWD-2083Y is a water-based universal pigment pre-liquid dispersion preparation with uniform particle size distribution, good fluidity, and is easily dispersed into water-based polymer emulsions. This product has a color index P.Y.83 and is applicable in e...展開 JWD-2083Y is a water-based universal pigment pre-liquid dispersion preparation with uniform particle size distribution, good fluidity, and is easily dispersed into water-based polymer emulsions. This product has a color index P.Y.83 and is applicable in emulsion paint, interior and exterior wall coatings, ink colorants, and water-based industrial paints. 收起
JWD-2083YD Jeco Pigment (USA), Inc. JWD-2083YD is a water-based universal pigment pre-liquid dispersion preparation with uniform particle size distribution, good fluidity, and is easily dispersed into water-based polymer emulsions. This product has a color index P.Y.83 and is applicable in ...展開 JWD-2083YD is a water-based universal pigment pre-liquid dispersion preparation with uniform particle size distribution, good fluidity, and is easily dispersed into water-based polymer emulsions. This product has a color index P.Y.83 and is applicable in emulsion paint, interior and exterior wall coatings, ink colorants, and water-based industrial paints. 收起
JWD-2097Y Jeco Pigment (USA), Inc. JWD-2097Y is a water-based universal pigment pre-liquid dispersion preparation with uniform particle size distribution, good fluidity, and is easily dispersed into water-based polymer emulsions. This product has a color index P.Y.97 and is applicable in e...展開 JWD-2097Y is a water-based universal pigment pre-liquid dispersion preparation with uniform particle size distribution, good fluidity, and is easily dispersed into water-based polymer emulsions. This product has a color index P.Y.97 and is applicable in emulsion paint, interior and exterior wall coatings, ink colorants, and water-based industrial paints. 收起
JWD-2110Y Jeco Pigment (USA), Inc. JWD-2110Y is a water-based universal pigment pre-liquid dispersion preparation with uniform particle size distribution, good fluidity, and is easily dispersed into water-based polymer emulsions. This product has a color index P.Y.110 and is applicable in ...展開 JWD-2110Y is a water-based universal pigment pre-liquid dispersion preparation with uniform particle size distribution, good fluidity, and is easily dispersed into water-based polymer emulsions. This product has a color index P.Y.110 and is applicable in emulsion paint, interior and exterior wall coatings, ink colorants, and water-based industrial paints. 收起
JWD-2112R Jeco Pigment (USA), Inc. JWD-2112R is a water-based universal pigment pre-liquid dispersion preparation with uniform particle size distribution, good fluidity, and is easily dispersed into water-based polymer emulsions. This product has a color index P.R.112 and is applicable in ...展開 JWD-2112R is a water-based universal pigment pre-liquid dispersion preparation with uniform particle size distribution, good fluidity, and is easily dispersed into water-based polymer emulsions. This product has a color index P.R.112 and is applicable in emulsion paint, interior and exterior wall coatings, ink colorants, and water-based industrial paints. 收起
JWD-2122R Jeco Pigment (USA), Inc. JWD-2122R is a water-based universal pigment pre-liquid dispersion preparation with uniform particle size distribution, good fluidity, and is easily dispersed into water-based polymer emulsions. This product has a color index P.R.122 and is applicable in ...展開 JWD-2122R is a water-based universal pigment pre-liquid dispersion preparation with uniform particle size distribution, good fluidity, and is easily dispersed into water-based polymer emulsions. This product has a color index P.R.122 and is applicable in emulsion paint, interior and exterior wall coatings, ink colorants, and water-based industrial paints. 收起
JWD-2138Y Jeco Pigment (USA), Inc. JWD-2138Y is a water-based universal pigment pre-liquid dispersion preparation with uniform particle size distribution, good fluidity, and is easily dispersed into water-based polymer emulsions. This product has a color index P.Y.138 and is applicable in ...展開 JWD-2138Y is a water-based universal pigment pre-liquid dispersion preparation with uniform particle size distribution, good fluidity, and is easily dispersed into water-based polymer emulsions. This product has a color index P.Y.138 and is applicable in emulsion paint, interior and exterior wall coatings, ink colorants, and water-based industrial paints. 收起
JWD-2146R Jeco Pigment (USA), Inc. JWD-2146R is a water-based universal pigment pre-liquid dispersion preparation with uniform particle size distribution, good fluidity, and is easily dispersed into water-based polymer emulsions. This product has a color index P.R.146 and is applicable in ...展開 JWD-2146R is a water-based universal pigment pre-liquid dispersion preparation with uniform particle size distribution, good fluidity, and is easily dispersed into water-based polymer emulsions. This product has a color index P.R.146 and is applicable in emulsion paint, interior and exterior wall coatings, ink colorants, and water-based industrial paints. 收起
JWD-2150B Jeco Pigment (USA), Inc. JWD-2150B is a water-based universal pigment pre-liquid dispersion preparation with uniform particle size distribution, good fluidity, and is easily dispersed into water-based polymer emulsions. This product has a color index P.B.15:0 and is applicable in...展開 JWD-2150B is a water-based universal pigment pre-liquid dispersion preparation with uniform particle size distribution, good fluidity, and is easily dispersed into water-based polymer emulsions. This product has a color index P.B.15:0 and is applicable in emulsion paint, interior and exterior wall coatings, ink colorants, and water-based industrial paints. 收起
JWD-2153B Jeco Pigment (USA), Inc. JWD-2153B is a water-based universal pigment pre-liquid dispersion preparation with uniform particle size distribution, good fluidity, and is easily dispersed into water-based polymer emulsions. This product has a color index P.B.15:3 and is applicable in...展開 JWD-2153B is a water-based universal pigment pre-liquid dispersion preparation with uniform particle size distribution, good fluidity, and is easily dispersed into water-based polymer emulsions. This product has a color index P.B.15:3 and is applicable in emulsion paint, interior and exterior wall coatings, ink colorants, and water-based industrial paints. 收起
JWD-2154Y Jeco Pigment (USA), Inc. JWD-2154Y is a water-based universal pigment pre-liquid dispersion preparation with uniform particle size distribution, good fluidity, and is easily dispersed into water-based polymer emulsions. This product has a color index P.Y.154 and is applicable in ...展開 JWD-2154Y is a water-based universal pigment pre-liquid dispersion preparation with uniform particle size distribution, good fluidity, and is easily dispersed into water-based polymer emulsions. This product has a color index P.Y.154 and is applicable in emulsion paint, interior and exterior wall coatings, ink colorants, and water-based industrial paints. 收起
JWD-2254R Jeco Pigment (USA), Inc. JWD-2254R is a water-based universal pigment pre-liquid dispersion preparation with uniform particle size distribution, good fluidity, and is easily dispersed into water-based polymer emulsions. This product has a color index P.R.254 and is applicable in ...展開 JWD-2254R is a water-based universal pigment pre-liquid dispersion preparation with uniform particle size distribution, good fluidity, and is easily dispersed into water-based polymer emulsions. This product has a color index P.R.254 and is applicable in emulsion paint, interior and exterior wall coatings, ink colorants, and water-based industrial paints. 收起
JWF-2007BK Jeco Pigment (USA), Inc. JWF-2007BK is a water-based super-fine pre-liquid dispersion preparation that has a color index P.Bk.7 with high transparency, narrow micron distribution, good gloss, and small particle size. This product has good compatibility in water-based systems and ...展開 JWF-2007BK is a water-based super-fine pre-liquid dispersion preparation that has a color index P.Bk.7 with high transparency, narrow micron distribution, good gloss, and small particle size. This product has good compatibility in water-based systems and is used in drawing ink, ball pen ink, fiber pen ink, glass coating, wood tinting, water-based wood coating, and more. 收起
JWF-2007G Jeco Pigment (USA), Inc. JWF-2007G is a water-based super-fine pre-liquid dispersion preparation that has a color index P.G.7 with high transparency, narrow micron distribution, good gloss, and small particle size. This product has good compatibility in water-based systems and is...展開 JWF-2007G is a water-based super-fine pre-liquid dispersion preparation that has a color index P.G.7 with high transparency, narrow micron distribution, good gloss, and small particle size. This product has good compatibility in water-based systems and is used in drawing ink, ball pen ink, fiber pen ink, glass coating, wood tinting, water-based wood coating, and more. 收起
JWF-2023VR Jeco Pigment (USA), Inc. JWF-2023VR is a water-based super-fine pre-liquid dispersion preparation that has a color index P.V.23 with high transparency, narrow micron distribution, good gloss, and small particle size. This product has good compatibility in water-based systems and ...展開 JWF-2023VR is a water-based super-fine pre-liquid dispersion preparation that has a color index P.V.23 with high transparency, narrow micron distribution, good gloss, and small particle size. This product has good compatibility in water-based systems and is used in drawing ink, ball pen ink, fiber pen ink, glass coating, wood tinting, water-based wood coating, and more. 收起
JWF-2036O Jeco Pigment (USA), Inc. JWF-2036O is a water-based super-fine pre-liquid dispersion preparation that has a color index P.O.36 with high transparency, narrow micron distribution, good gloss, and small particle size. This product has good compatibility in water-based systems and i...展開 JWF-2036O is a water-based super-fine pre-liquid dispersion preparation that has a color index P.O.36 with high transparency, narrow micron distribution, good gloss, and small particle size. This product has good compatibility in water-based systems and is used in drawing ink, ball pen ink, fiber pen ink, glass coating, wood tinting, water-based wood coating, and more. 收起
JWF-2083Y Jeco Pigment (USA), Inc. JWF-2083Y is a water-based super-fine pre-liquid dispersion preparation that has a color index P.Y.83 with high transparency, narrow micron distribution, good gloss, and small particle size. This product has good compatibility in water-based systems and i...展開 JWF-2083Y is a water-based super-fine pre-liquid dispersion preparation that has a color index P.Y.83 with high transparency, narrow micron distribution, good gloss, and small particle size. This product has good compatibility in water-based systems and is used in drawing ink, ball pen ink, fiber pen ink, glass coating, wood tinting, water-based wood coating, and more. 收起
JWF-2097Y Jeco Pigment (USA), Inc. JWF-2097Y is a water-based super-fine pre-liquid dispersion preparation that has a color index P.Y.97 with high transparency, narrow micron distribution, good gloss, and small particle size. This product has good compatibility in water-based systems and i...展開 JWF-2097Y is a water-based super-fine pre-liquid dispersion preparation that has a color index P.Y.97 with high transparency, narrow micron distribution, good gloss, and small particle size. This product has good compatibility in water-based systems and is used in drawing ink, ball pen ink, fiber pen ink, glass coating, wood tinting, water-based wood coating, and more. 收起
JWF-2112R Jeco Pigment (USA), Inc. JWF-2112R is a water-based super-fine pre-liquid dispersion preparation that has a color index P.R.112 with high transparency, narrow micron distribution, good gloss, and small particle size. This product has good compatibility in water-based systems and ...展開 JWF-2112R is a water-based super-fine pre-liquid dispersion preparation that has a color index P.R.112 with high transparency, narrow micron distribution, good gloss, and small particle size. This product has good compatibility in water-based systems and is used in drawing ink, ball pen ink, fiber pen ink, glass coating, wood tinting, water-based wood coating, and more. 收起
JWF-2122R Jeco Pigment (USA), Inc. JWF-2122R is a water-based super-fine pre-liquid dispersion preparation that has a color index P.R.122 with high transparency, narrow micron distribution, good gloss, and small particle size. This product has good compatibility in water-based systems and ...展開 JWF-2122R is a water-based super-fine pre-liquid dispersion preparation that has a color index P.R.122 with high transparency, narrow micron distribution, good gloss, and small particle size. This product has good compatibility in water-based systems and is used in drawing ink, ball pen ink, fiber pen ink, glass coating, wood tinting, water-based wood coating, and more. 收起
JWF-2150B Jeco Pigment (USA), Inc. JWF-2150B is a water-based super-fine pre-liquid dispersion preparation that has a color index P.B.15:0 with high transparency, narrow micron distribution, good gloss, and small particle size. This product has good compatibility in water-based systems and...展開 JWF-2150B is a water-based super-fine pre-liquid dispersion preparation that has a color index P.B.15:0 with high transparency, narrow micron distribution, good gloss, and small particle size. This product has good compatibility in water-based systems and is used in drawing ink, ball pen ink, fiber pen ink, glass coating, wood tinting, water-based wood coating, and more. 收起
JWF-2153B Jeco Pigment (USA), Inc. JWF-2153B is a water-based super-fine pre-liquid dispersion preparation that has a color index P.B.15:3 with high transparency, narrow micron distribution, good gloss, and small particle size. This product has good compatibility in water-based systems and...展開 JWF-2153B is a water-based super-fine pre-liquid dispersion preparation that has a color index P.B.15:3 with high transparency, narrow micron distribution, good gloss, and small particle size. This product has good compatibility in water-based systems and is used in drawing ink, ball pen ink, fiber pen ink, glass coating, wood tinting, water-based wood coating, and more. 收起
JWF-2154Y Jeco Pigment (USA), Inc. JWF-2154Y is a water-based super-fine pre-liquid dispersion preparation that has a color index P.Y.154 with high transparency, narrow micron distribution, good gloss, and small particle size. This product has good compatibility in water-based systems and ...展開 JWF-2154Y is a water-based super-fine pre-liquid dispersion preparation that has a color index P.Y.154 with high transparency, narrow micron distribution, good gloss, and small particle size. This product has good compatibility in water-based systems and is used in drawing ink, ball pen ink, fiber pen ink, glass coating, wood tinting, water-based wood coating, and more. 收起
JWF-2184R Jeco Pigment (USA), Inc. JWF-2184R is a water-based super-fine pre-liquid dispersion preparation that has a color index P.R.184 with high transparency, narrow micron distribution, good gloss, and small particle size. This product has good compatibility in water-based systems and ...展開 JWF-2184R is a water-based super-fine pre-liquid dispersion preparation that has a color index P.R.184 with high transparency, narrow micron distribution, good gloss, and small particle size. This product has good compatibility in water-based systems and is used in drawing ink, ball pen ink, fiber pen ink, glass coating, wood tinting, water-based wood coating, and more. 收起
JWF-2188R Jeco Pigment (USA), Inc. JWF-2188R is a water-based super-fine pre-liquid dispersion preparation that has a color index P.R.188 with high transparency, narrow micron distribution, good gloss, and small particle size. This product has good compatibility in water-based systems and ...展開 JWF-2188R is a water-based super-fine pre-liquid dispersion preparation that has a color index P.R.188 with high transparency, narrow micron distribution, good gloss, and small particle size. This product has good compatibility in water-based systems and is used in drawing ink, ball pen ink, fiber pen ink, glass coating, wood tinting, water-based wood coating, and more. 收起
JWF-2254R Jeco Pigment (USA), Inc. JWF-2254R is a water-based super-fine pre-liquid dispersion preparation that has a color index P.R.254 with high transparency, narrow micron distribution, good gloss, and small particle size. This product has good compatibility in water-based systems and ...展開 JWF-2254R is a water-based super-fine pre-liquid dispersion preparation that has a color index P.R.254 with high transparency, narrow micron distribution, good gloss, and small particle size. This product has good compatibility in water-based systems and is used in drawing ink, ball pen ink, fiber pen ink, glass coating, wood tinting, water-based wood coating, and more. 收起
JWL-2007BK Jeco Pigment (USA), Inc. JWL-2007BK is a pre-liquid dispersion preparation specially developed based on leather characters with high transparency, superior heat resistance, and low viscosity. This product has a color index P.Bk.7 and is used in water-based leather for the printin...展開 JWL-2007BK is a pre-liquid dispersion preparation specially developed based on leather characters with high transparency, superior heat resistance, and low viscosity. This product has a color index P.Bk.7 and is used in water-based leather for the printing of leather tinting and coating. 收起
JWL-2007G Jeco Pigment (USA), Inc. JWL-2007G is a pre-liquid dispersion preparation specially developed based on leather characters with high transparency, superior heat resistance, and low viscosity. This product has a color index P.G.7 and is used in water-based leather for the printing ...展開 JWL-2007G is a pre-liquid dispersion preparation specially developed based on leather characters with high transparency, superior heat resistance, and low viscosity. This product has a color index P.G.7 and is used in water-based leather for the printing of leather tinting and coating. 收起
JWL-2019V Jeco Pigment (USA), Inc. JWL-2019V is a pre-liquid dispersion preparation specially developed based on leather characters with high transparency, superior heat resistance, and low viscosity. This product has a color index P.V.19 and is used in water-based leather for the printing...展開 JWL-2019V is a pre-liquid dispersion preparation specially developed based on leather characters with high transparency, superior heat resistance, and low viscosity. This product has a color index P.V.19 and is used in water-based leather for the printing of leather tinting and coating. 收起
JWL-2023BR Jeco Pigment (USA), Inc. JWL-2023BR is a pre-liquid dispersion preparation specially developed based on leather characters with high transparency, superior heat resistance, and low viscosity. This product has a color index P.BR.23 and is used in water-based leather for the printi...展開 JWL-2023BR is a pre-liquid dispersion preparation specially developed based on leather characters with high transparency, superior heat resistance, and low viscosity. This product has a color index P.BR.23 and is used in water-based leather for the printing of leather tinting and coating. 收起
JWL-2023VR Jeco Pigment (USA), Inc. JWL-2023VR is a pre-liquid dispersion preparation specially developed based on leather characters with high transparency, superior heat resistance, and low viscosity. This product has a color index P.V.23 and is used in water-based leather for the printin...展開 JWL-2023VR is a pre-liquid dispersion preparation specially developed based on leather characters with high transparency, superior heat resistance, and low viscosity. This product has a color index P.V.23 and is used in water-based leather for the printing of leather tinting and coating. 收起
JWL-2025BR Jeco Pigment (USA), Inc. JWL-2025BR is a pre-liquid dispersion preparation specially developed based on leather characters with high transparency, superior heat resistance, and low viscosity. This product has a color index P.BR.25 and is used in water-based leather for the printi...展開 JWL-2025BR is a pre-liquid dispersion preparation specially developed based on leather characters with high transparency, superior heat resistance, and low viscosity. This product has a color index P.BR.25 and is used in water-based leather for the printing of leather tinting and coating. 收起
JWL-2083Y Jeco Pigment (USA), Inc. JWL-2083Y is a pre-liquid dispersion preparation specially developed based on leather characters with high transparency, superior heat resistance, and low viscosity. This product has a color index P.Y.83 and is used in water-based leather for the printing...展開 JWL-2083Y is a pre-liquid dispersion preparation specially developed based on leather characters with high transparency, superior heat resistance, and low viscosity. This product has a color index P.Y.83 and is used in water-based leather for the printing of leather tinting and coating. 收起
JWL-2122R Jeco Pigment (USA), Inc. JWL-2122R is a pre-liquid dispersion preparation specially developed based on leather characters with high transparency, superior heat resistance, and low viscosity. This product has a color index P.R.122 and is used in water-based leather for the printin...展開 JWL-2122R is a pre-liquid dispersion preparation specially developed based on leather characters with high transparency, superior heat resistance, and low viscosity. This product has a color index P.R.122 and is used in water-based leather for the printing of leather tinting and coating. 收起
JWL-2138Y Jeco Pigment (USA), Inc. JWL-2138Y is a pre-liquid dispersion preparation specially developed based on leather characters with high transparency, superior heat resistance, and low viscosity. This product has a color index P.Y.138 and is used in water-based leather for the printin...展開 JWL-2138Y is a pre-liquid dispersion preparation specially developed based on leather characters with high transparency, superior heat resistance, and low viscosity. This product has a color index P.Y.138 and is used in water-based leather for the printing of leather tinting and coating. 收起