UL Prospector

成功!

成功保存搜索結果
2-(2-Ethoxyethoxy) Ethylacrylate (EOEOEA) Beijing RBL Chemicals Co., Ltd. 2-(2-Ethoxyethoxy) Ethylacrylate (EOEOEA) is an acrylate monomer. This product appears as a clear liquid and has good flexibility and dilution properties. It can be used in UV-coatings for metal, wood, and in ink applications.
99.99% Conductive Shining Flake Silver Powder Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展開 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起
99.99% Conductive Silver Powder (Spherical) Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications.
Acetylated Distarch Ddipate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive.
Acetylated Distarch Phosphate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展開 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起
Acryloyl Morpholine (ACMO) Beijing RBL Chemicals Co., Ltd. Acryloyl Morpholine (ACMO) is a homopolymer that has good retention and elongation stability. This product appears as a colorless or slightly yellow, clear liquid that is soluble in various solvents. It can provide good resistance to alkali, acids, and so...展開 Acryloyl Morpholine (ACMO) is a homopolymer that has good retention and elongation stability. This product appears as a colorless or slightly yellow, clear liquid that is soluble in various solvents. It can provide good resistance to alkali, acids, and solvents, and be used in adhesives, UV printing inks, and industrial coatings. 收起
Alkylsulfonic Acid Ester of Phenol Plasticizer Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC.
C Glass Flake GF007/C Glassflake Ltd C Glass Flake GF007/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting i...展開 C Glass Flake GF007/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
C Glass Flake GF750/C Glassflake Ltd C Glass Flake GF750/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting i...展開 C Glass Flake GF750/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
C Glass Flake GF750MC Glassflake Ltd C Glass Flake GF750MC is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/-2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in...展開 C Glass Flake GF750MC is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/-2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
Cardanol Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...展開 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. 收起
Dipropylene Glycol Diacrylate (DPGDA) Beijing RBL Chemicals Co., Ltd. Dipropylene Glycol Diacrylate (DPGDA) is an acrylate monomer that has low viscosity, low volatility, fast curing, and good dilution. This product appears as a clear liquid, and it can be used in adhesives, inks, and coatings.
ECR Glass Flake GF001 Glassflake Ltd ECR Glass Flake GF001 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF001 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF002 Glassflake Ltd ECR Glass Flake GF002 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.3 - 2.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF002 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.3 - 2.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF003 Glassflake Ltd ECR Glass Flake GF003 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 2.3 - 3.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF003 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 2.3 - 3.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF005 Glassflake Ltd ECR Glass Flake GF005 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties ...展開 ECR Glass Flake GF005 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF007 Glassflake Ltd ECR Glass Flake GF007 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF007 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF100M (Milled) Glassflake Ltd ECR Glass Flake GF100M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF100M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF100M (Unmilled) Glassflake Ltd ECR Glass Flake GF100 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展開 ECR Glass Flake GF100 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF100nm (Unmilled) Glassflake Ltd ECR Glass Flake GF100nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF100nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF100nmM (Milled) Glassflake Ltd ECR Glass Flake GF100nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF100nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF350nm (Unmilled) Glassflake Ltd ECR Glass Flake GF350nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF350nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF350nmM (Milled) Glassflake Ltd ECR Glass Flake GF350nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF350nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF500M (Milled) Glassflake Ltd ECR Glass Flake GF500M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF500M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF500M (Unmilled) Glassflake Ltd ECR Glass Flake GF500 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展開 ECR Glass Flake GF500 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF500nm (Unmilled) Glassflake Ltd ECR Glass Flake GF500nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF500nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF500nmM (Milled) Glassflake Ltd ECR Glass Flake GF500nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF500nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF750M (Milled) Glassflake Ltd ECR Glass Flake GF750 (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF750 (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF750M (Unmilled) Glassflake Ltd ECR Glass Flake GF750 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展開 ECR Glass Flake GF750 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF750nm (Unmilled) Glassflake Ltd ECR Glass Flake GF750nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF750nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
ECR Glass Flake GF750nmM (Milled) Glassflake Ltd ECR Glass Flake GF750nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF750nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起
F-146 Wuzhou Longteng Chemical Co., Ltd. F-146 is a rosin modified phenolic resin that has excellent solubility, good emulsification properties, high viscosity and good gloss. This product has a softening point range of 165-180°C and is used in high-level offset inks.
F-165 Wuzhou Longteng Chemical Co., Ltd. F-165 is a rosin modified phenolic resin that has quick setting and high gloss properties. This product has a softening point range of 165-175°C and is used in offset inks.
F-173 Wuzhou Longteng Chemical Co., Ltd. F-173 is a rosin modified phenolic resin that has quick drying, good flow and gloss properties. This product has a softening point range of 165-175°C and is used in offset inks.
F-183 Wuzhou Longteng Chemical Co., Ltd. F-183 is a rosin modified phenolic resin that has quick drying properties. This product has a softening point range of 165-180°C and is used in offset inks.
F-2116 Wuzhou Longteng Chemical Co., Ltd. F-2116 is a rosin modified phenolic resin that has light color and less to turn yellow properties. This product has a softening point range of 151-168°C and is used in lithographic ink and offset point cycle printing ink.
F-35 Wuzhou Longteng Chemical Co., Ltd. F-35 is a rosin modified phenolic resin that has excellent solubility and dispersibility properties. This product has a softening point range of 145-155°C and is used in offset inks.
F-611 Wuzhou Longteng Chemical Co., Ltd. F-611 is a rosin modified phenolic resin that has quick drying and good gloss properties. This product has a softening point range of 145-160°C and is used in offset inks.
F-612 Wuzhou Longteng Chemical Co., Ltd. F-612 is a rosin modified phenolic resin that has good anti-emulsification and solubility properties. This product has a softening point range of 160-170°C and is used in offset inks.
F-613 Wuzhou Longteng Chemical Co., Ltd. F-613 is a rosin modified phenolic resin that has good gloss and flow properties. This product has a softening point range of 150-158°C and is used in offset point cycle printing inks.
F-702 Wuzhou Longteng Chemical Co., Ltd. F-702 is a rosin modified phenolic resin that has quick drying and gloss properties. This product has a softening point range of 165-175°C and is used in offset inks.
FAR-130 Wuzhou Longteng Chemical Co., Ltd. FAR-130 is an alcohol soluble resin derived from maleic anhydride or fumaric acid modified resins through esterification with polyalcohol. This product has good hardness, gloss and quick drying for gravure inks, alcohol soluble intaglio printing inks, glo...展開 FAR-130 is an alcohol soluble resin derived from maleic anhydride or fumaric acid modified resins through esterification with polyalcohol. This product has good hardness, gloss and quick drying for gravure inks, alcohol soluble intaglio printing inks, gloss oil polish and paints. It contains a softening point range of 125-135°C and an acid value between 180-210 mgKOH/g. 收起
FAR-140 Wuzhou Longteng Chemical Co., Ltd. FAR-140 is an alcohol soluble resin derived from maleic anhydride or fumaric acid modified resins through esterification with polyalcohol. This product has good hardness, high gloss and quick drying for gravure inks and alcohol soluble intaglio printing i...展開 FAR-140 is an alcohol soluble resin derived from maleic anhydride or fumaric acid modified resins through esterification with polyalcohol. This product has good hardness, high gloss and quick drying for gravure inks and alcohol soluble intaglio printing inks, gloss oil polish and paints. It contains a softening point range of 135-145°C and an acid value between 290-320 mgKOH/g. 收起
FAR-150 Wuzhou Longteng Chemical Co., Ltd. FAR-150 is an alcohol soluble resin derived from maleic anhydride or fumaric acid modified resins through esterification with polyalcohol. This product has excellent hardness, high gloss and quick drying for gravure inks, alcohol soluble intaglio printing...展開 FAR-150 is an alcohol soluble resin derived from maleic anhydride or fumaric acid modified resins through esterification with polyalcohol. This product has excellent hardness, high gloss and quick drying for gravure inks, alcohol soluble intaglio printing inks, gloss oil polish and paints. It contains a softening point range of 155-165°C and an acid value between 195-210 mgKOH/g. 收起
Fumed Silica Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....展開 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 收起
Gum Rosin (K) Wuzhou Longteng Chemical Co., Ltd. Gum Rosin (K) is a yellow red natural resin composed of various resin acids that dissolves easily in organic solvents. This product is an important raw material used in the production of coatings and inks. It has a softening point of 74°C, an acid value o...展開 Gum Rosin (K) is a yellow red natural resin composed of various resin acids that dissolves easily in organic solvents. This product is an important raw material used in the production of coatings and inks. It has a softening point of 74°C, an acid value of 164 mgKOH/g, and an ash content level of 0.04%. 收起
Gum Rosin (M) Wuzhou Longteng Chemical Co., Ltd. Gum Rosin (M) is a yellow brown natural resin composed of various resin acids that dissolves easily in organic solvents. This product is an important raw material used in the production of coatings and inks. It has a softening point of 74°C, an acid value...展開 Gum Rosin (M) is a yellow brown natural resin composed of various resin acids that dissolves easily in organic solvents. This product is an important raw material used in the production of coatings and inks. It has a softening point of 74°C, an acid value of 164 mgKOH/g, and an ash content level of 0.04%. 收起
Gum Rosin (N) Wuzhou Longteng Chemical Co., Ltd. Gum Rosin (N) is a deep yellow natural resin composed of various resin acids that dissolves easily in organic solvents. This product is an important raw material used in the production of coatings and inks. It has a softening point of 75°C, an acid value ...展開 Gum Rosin (N) is a deep yellow natural resin composed of various resin acids that dissolves easily in organic solvents. This product is an important raw material used in the production of coatings and inks. It has a softening point of 75°C, an acid value of 165 mgKOH/g, and an ash content level of 0.03%. 收起
Gum Rosin (WG) Wuzhou Longteng Chemical Co., Ltd. Gum Rosin (WG) is a yellow natural resin composed of various resin acids that dissolves easily in organic solvents. This product is an important raw material used in the production of coatings and inks. It has a softening point of 75°C, an acid value of 1...展開 Gum Rosin (WG) is a yellow natural resin composed of various resin acids that dissolves easily in organic solvents. This product is an important raw material used in the production of coatings and inks. It has a softening point of 75°C, an acid value of 165 mgKOH/g, and an ash content level of 0.03%. 收起
Gum Rosin (WWW) Wuzhou Longteng Chemical Co., Ltd. Gum Rosin (WWW) is a pale yellow natural resin composed of various resin acids that dissolves easily in organic solvents. This product is an important raw material used in the production of coatings and inks. It has a softening point of 76°C, an acid valu...展開 Gum Rosin (WWW) is a pale yellow natural resin composed of various resin acids that dissolves easily in organic solvents. This product is an important raw material used in the production of coatings and inks. It has a softening point of 76°C, an acid value of 166 mgKOH/g, and an ash content level of 0.02%. 收起
Gum Rosin (X) Wuzhou Longteng Chemical Co., Ltd. Gum Rosin (X) is a slightly yellow natural resin composed of various resin acids that dissolves easily in organic solvents. This product is an important raw material used in the production of coatings and inks. It has a softening point of 76°C, an acid va...展開 Gum Rosin (X) is a slightly yellow natural resin composed of various resin acids that dissolves easily in organic solvents. This product is an important raw material used in the production of coatings and inks. It has a softening point of 76°C, an acid value of 166 mgKOH/g, and an ash content level of 0.02%. 收起
H0201 Long Kou Windstar Chemical Co., Ltd. H0201 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0301 Long Kou Windstar Chemical Co., Ltd. H0301 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0601 Long Kou Windstar Chemical Co., Ltd. H0601 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0801 Long Kou Windstar Chemical Co., Ltd. H0801 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0806 Long Kou Windstar Chemical Co., Ltd. H0806 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0901 Long Kou Windstar Chemical Co., Ltd. H0901 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0902 Long Kou Windstar Chemical Co., Ltd. H0902 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0903 Long Kou Windstar Chemical Co., Ltd. H0903 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0904 Long Kou Windstar Chemical Co., Ltd. H0904 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0905 Long Kou Windstar Chemical Co., Ltd. H0905 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
H0906 Long Kou Windstar Chemical Co., Ltd. H0906 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.
HGR12 Wuzhou Longteng Chemical Co., Ltd. HGR12 is a transparent hydrogenated rosin that has a softening point of 71°C. This product is commonly used in adhesives, coatings, and inks.
HGR20 Wuzhou Longteng Chemical Co., Ltd. HGR20 is a transparent hydrogenated rosin that has a softening point of 71°C. This product is commonly used in adhesives, coatings, and inks.
HRC9A Wuzhou Longteng Chemical Co., Ltd. HRC9A is a light yellow transparent granular solid that is a low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through catalytic-polymerization technique. This product has strong solubility, heat, water and yell...展開 HRC9A is a light yellow transparent granular solid that is a low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through catalytic-polymerization technique. This product has strong solubility, heat, water and yellowing resistance, insulation, chemical stability over acid and alkali and adhesive strength for use in adhesives, glue, paint and ink. It has a softening point range of 90-110°C and an acid value of 0.4 mgKOH/g. 收起
HRC9B Wuzhou Longteng Chemical Co., Ltd. HRC9B is a light yellow transparent granular solid that is a low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through catalytic-polymerization technique. This product has strong solubility, heat, water and yell...展開 HRC9B is a light yellow transparent granular solid that is a low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through catalytic-polymerization technique. This product has strong solubility, heat, water and yellowing resistance, insulation, chemical stability over acid and alkali and adhesive strength for use in adhesives, glue, paint and ink. It has a softening point range of 110-140°C and an acid value of 0.4 mgKOH/g. 收起
HRC9C Wuzhou Longteng Chemical Co., Ltd. HRC9C is a light yellow transparent granular solid that is a low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through catalytic-polymerization technique. This product has strong solubility, heat, water and yell...展開 HRC9C is a light yellow transparent granular solid that is a low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through catalytic-polymerization technique. This product has strong solubility, heat, water and yellowing resistance, insulation, chemical stability over acid and alkali and adhesive strength for use in adhesives, glue, paint and ink. It has a softening point range of 90-110°C and an acid value of 0.4 mgKOH/g. 收起
HRC9D Wuzhou Longteng Chemical Co., Ltd. HRC9D is a light yellow transparent granular solid that is a low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through catalytic-polymerization technique. This product has strong solubility, heat, water and yell...展開 HRC9D is a light yellow transparent granular solid that is a low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through catalytic-polymerization technique. This product has strong solubility, heat, water and yellowing resistance, insulation, chemical stability over acid and alkali and adhesive strength for use in adhesives, glue, paint and ink. It has a softening point range of 110-140°C and an acid value of 0.4 mgKOH/g. 收起
Hydroxypropyl Aistarch Phosphate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive.
LA Glass Flake GF001LA Glassflake Ltd LA Glass Flake GF001LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substr...展開 LA Glass Flake GF001LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substrate which, unlike natural micas and synthetic micas, have a completely planar and smooth surface. They are also completely transparent, giving rise to effect pigments coated with metal oxides that display high brightness, good color purity, and high chroma. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起
LA Glass Flake GF100LA Glassflake Ltd LA Glass Flake GF100LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substr...展開 LA Glass Flake GF100LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substrate which, unlike natural micas and synthetic micas, have a completely planar and smooth surface. They are also completely transparent, giving rise to effect pigments coated with metal oxides that display high brightness, good color purity, and high chroma. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起
LA Glass Flake GF100MLA Glassflake Ltd LA Glass Flake GF100MLA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique subst...展開 LA Glass Flake GF100MLA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substrate which, unlike natural micas and synthetic micas, have a completely planar and smooth surface. They are also completely transparent, giving rise to effect pigments coated with metal oxides that display high brightness, good color purity, and high chroma. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起
MR130A Wuzhou Longteng Chemical Co., Ltd. MR130A is a maleic resin that is a slight yellow transparent solid of gum rosin and maleic anhydride derived from the esterification by glycerol. This product is resistant to yellowing and heat, and has adhesion for use in polyurethane and nitrocellulose ...展開 MR130A is a maleic resin that is a slight yellow transparent solid of gum rosin and maleic anhydride derived from the esterification by glycerol. This product is resistant to yellowing and heat, and has adhesion for use in polyurethane and nitrocellulose paint, and acid cured paint, lacquer, and inks. 收起
MR130B Wuzhou Longteng Chemical Co., Ltd. MR130B is a maleic resin that is a slight yellow transparent solid of gum rosin and maleic anhydride derived from the esterification by glycerol. This product is resistant to yellowing and heat, and has adhesion for use in polyurethane and nitrocellulose ...展開 MR130B is a maleic resin that is a slight yellow transparent solid of gum rosin and maleic anhydride derived from the esterification by glycerol. This product is resistant to yellowing and heat, and has adhesion for use in polyurethane and nitrocellulose paint, acid cured paint, lacquer, and inks. 收起
Methyltriethoxysilane Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silico...展開 Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silicone resins and silicone rubber,silicone resins and silicone rubber. 收起
Methyltrimethoxysilane Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainl...展開 Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainly used as the crosslinking agent of room temperature vulcanized silicone rubber, as well as the glass fiber surface treatment agent and reinforced plastic laminate treatment agent, in order to improve the mechanical strength of products, heat resistance, moisture resistance. 收起
Modified Starch - Compound Active Printing Paste Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological pro...展開 Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起
Modified Starch - High End Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holdi...展開 Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. 收起
Modified Starch - Mid Range Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, ...展開 Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起
Moonshine® AgFlake 100-100 (GFEAGF-1100) Glassflake Ltd Moonshine® AgFlake 100-100 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 100 μm. High conductivity can be achieved at low loadings...展開 Moonshine® AgFlake 100-100 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 100 μm. High conductivity can be achieved at low loadings. Agflakes are lightweight in contrast to equivalent pure metal fillers. They may be used as both a functional and a decorative pigment. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起
Moonshine® AgFlake 100-20 (GFEAGF-1020) Glassflake Ltd Moonshine® AgFlake 100-20 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 20 μm. High conductivity can be achieved at low loadings. ...展開 Moonshine® AgFlake 100-20 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 20 μm. High conductivity can be achieved at low loadings. Agflakes are lightweight in contrast to equivalent pure metal fillers. They may be used as both a functional and a decorative pigment. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起
Moonshine® AgFlake 100-40 (GFEAGF-1040) Glassflake Ltd Moonshine® AgFlake 100-40 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 40 μm. High conductivity can be achieved at low loadings. ...展開 Moonshine® AgFlake 100-40 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 40 μm. High conductivity can be achieved at low loadings. Agflakes are lightweight in contrast to equivalent pure metal fillers. They may be used as both a functional and a decorative pigment. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起
Moonshine® AgFlake 100-60 (GFEAGF-1060) Glassflake Ltd Moonshine® AgFlake 100-60 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 60 μm. High conductivity can be achieved at low loadings. ...展開 Moonshine® AgFlake 100-60 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 60 μm. High conductivity can be achieved at low loadings. Agflakes are lightweight in contrast to equivalent pure metal fillers. They may be used as both a functional and a decorative pigment. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起
Moonshine® AgFlake 100-80 (GFEAGF-1080) Glassflake Ltd Moonshine® AgFlake 100-80 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 80 μm. High conductivity can be achieved at low loadings. ...展開 Moonshine® AgFlake 100-80 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 80 μm. High conductivity can be achieved at low loadings. Agflakes are lightweight in contrast to equivalent pure metal fillers. They may be used as both a functional and a decorative pigment. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起
Moonshine® AuFlake 500-90 (GFEAUF-5090) Glassflake Ltd Moonshine® AuFlake 500-90 are thin borosilicate glass flakes encapsulated in silver, gold, and tin oxide. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 90 μm. High conductivity can be achie...展開 Moonshine® AuFlake 500-90 are thin borosilicate glass flakes encapsulated in silver, gold, and tin oxide. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 90 μm. High conductivity can be achieved at low loadings. Agflakes are lightweight in contrast to equivalent pure metal fillers. They may be used as both a functional and a decorative pigment. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起
Moonshine® Blue Shimmer (GFEB) Glassflake Ltd Moonshine® Blue Shimmer (GFEB) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides, resulting in unique pigments that display strong interference colors combined with high t...展開 Moonshine® Blue Shimmer (GFEB) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides, resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起
Moonshine® Blue Sparkle (GFEBS) Glassflake Ltd Moonshine® Blue Sparkle (GFEBS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides, resulting in unique pigments that display strong interference colors combined with high ...展開 Moonshine® Blue Sparkle (GFEBS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides, resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起
Moonshine® Bronze Ultra Shimmer (GFEBRSU) Glassflake Ltd Moonshine® Bronze Ultra Shimmer (GFEBRSU) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides, resulting in unique pigments that display strong interference colors combined ...展開 Moonshine® Bronze Ultra Shimmer (GFEBRSU) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides, resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起
Moonshine® Colour Travel Blue-Green-Gold Shimmer (GFE-BGG) Glassflake Ltd Moonshine® Colour Travel Blue-Green-Gold Shimmer (GFE-BGG) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display...展開 Moonshine® Colour Travel Blue-Green-Gold Shimmer (GFE-BGG) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起
Moonshine® Colour Travel Blue-Green-Gold Sparkle (GFE-BGGS) Glassflake Ltd Moonshine® Colour Travel Blue-Green-Gold Sparkle (GFE-BGGS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display st...展開 Moonshine® Colour Travel Blue-Green-Gold Sparkle (GFE-BGGS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起
Moonshine® Colour Travel Blue-Green-Gold Ultra Sparkle (GFE-BGGUS) Glassflake Ltd Moonshine® Colour Travel Blue-Green-Gold Ultra Sparkle (GFE-BGGUS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that...展開 Moonshine® Colour Travel Blue-Green-Gold Ultra Sparkle (GFE-BGGUS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起
Moonshine® Colour Travel Gold-Red-Violet Shimmer (GFE-GRV) Glassflake Ltd Moonshine® Colour Travel Gold-Red-Violet Shimmer (GFE-GRV) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display...展開 Moonshine® Colour Travel Gold-Red-Violet Shimmer (GFE-GRV) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起
Moonshine® Colour Travel Gold-Red-Violet Sparkle (GFE-GRVS) Glassflake Ltd Moonshine® Colour Travel Gold-Red-Violet Sparkle (GFE-GRVS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that displa...展開 Moonshine® Colour Travel Gold-Red-Violet Sparkle (GFE-GRVS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起
Moonshine® Colour Travel Gold-Red-Violet Ultra Sparkle (GFE-GRVUS) Glassflake Ltd Moonshine® Colour Travel Gold-Red-Violet Ultra Sparkle (GFE-GRVUS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that...展開 Moonshine® Colour Travel Gold-Red-Violet Ultra Sparkle (GFE-GRVUS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起
Moonshine® Colour Travel Red-Violet-Blue Shimmer (GFE-RVB) Glassflake Ltd Moonshine® Colour Travel Red-Violet-Blue Shimmer (GFE-RVB) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display...展開 Moonshine® Colour Travel Red-Violet-Blue Shimmer (GFE-RVB) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起
Moonshine® Colour Travel Red-Violet-Blue Sparkle (GFE-RVBS) Glassflake Ltd Moonshine® Colour Travel Red-Violet-Blue Sparkle (GFE-RVBS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that displa...展開 Moonshine® Colour Travel Red-Violet-Blue Sparkle (GFE-RVBS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起
Moonshine® Colour Travel Red-Violet-Blue Ultra Sparkle (GFE-RVBUS) Glassflake Ltd Moonshine® Colour Travel Red-Violet-Blue Ultra Sparkle (GFE-RVBUS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that...展開 Moonshine® Colour Travel Red-Violet-Blue Ultra Sparkle (GFE-RVBUS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起
Moonshine® Colour Travel Violet-Blue-Green Shimmer (GFE-VBG) Glassflake Ltd Moonshine® Colour Travel Violet-Blue-Green Shimmer (GFE-VBG) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that displ...展開 Moonshine® Colour Travel Violet-Blue-Green Shimmer (GFE-VBG) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起
Moonshine® Colour Travel Violet-Blue-Green Sparkle (GFE-VBGS) Glassflake Ltd Moonshine® Colour Travel Violet-Blue-Green Sparkle (GFE-VBGS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that disp...展開 Moonshine® Colour Travel Violet-Blue-Green Sparkle (GFE-VBGS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起
Moonshine® Colour Travel Violet-Blue-Green Ultra Sparkle (GFE-VBGUS) Glassflake Ltd Moonshine® Colour Travel Violet-Blue-Green Ultra Sparkle (GFE-VBGUS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments th...展開 Moonshine® Colour Travel Violet-Blue-Green Ultra Sparkle (GFE-VBGUS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起