| 99.99% Conductive Shining Flake Silver Powder | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展開 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起 | |
| 99.99% Conductive Silver Powder (Spherical) | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications. | |
| Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
| Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展開 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起 | |
| Alkylsulfonic Acid Ester of Phenol Plasticizer | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC. | |
| Benzidine Orange R | Emperor Pigment Co., Ltd. | Benzidine Orange R is a yellowish colored pigment that is used in solvent inks, aqueous inks, and aqueous coatings. It has a density value of 1.4 and a pH value of 7. This product has a color index number of Pigment Orange 16, a CAS number of 6505-28-8, a...展開 Benzidine Orange R is a yellowish colored pigment that is used in solvent inks, aqueous inks, and aqueous coatings. It has a density value of 1.4 and a pH value of 7. This product has a color index number of Pigment Orange 16, a CAS number of 6505-28-8, and an EU number of 229-388-1. 收起 | |
| Benzidine Yellow 121H | Emperor Pigment Co., Ltd. | Benzidine Yellow 121H is a pigment that is bright yellow in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used i...展開 Benzidine Yellow 121H is a pigment that is bright yellow in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used in PA inks, NC inks, PP inks, and Toluene based inks. 收起 | |
| Benzidine Yellow DHG | Emperor Pigment Co., Ltd. | Benzidine Yellow DHG is a bright yellow colored pigment that is used in offset inks and textile printing. It has a density value of 1.5 and a pH value of 6.0 to 7.0. This product has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, an...展開 Benzidine Yellow DHG is a bright yellow colored pigment that is used in offset inks and textile printing. It has a density value of 1.5 and a pH value of 6.0 to 7.0. This product has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. 收起 | |
| Benzidine Yellow G | Emperor Pigment Co., Ltd. | Benzidine Yellow G is a pigment that is reddish yellow and transparent in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0,...展開 Benzidine Yellow G is a pigment that is reddish yellow and transparent in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used in offset inks, waterbased inks, and textile printing. 收起 | |
| Benzidine Yellow G-A | Emperor Pigment Co., Ltd. | Benzidine Yellow G-A is a pigment that is reddish yellow in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used i...展開 Benzidine Yellow G-A is a pigment that is reddish yellow in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used in offset inks, waterbased inks, and textile printing. 收起 | |
| Benzidine Yellow G-B | Emperor Pigment Co., Ltd. | Benzidine Yellow G-B is a greenish yellow and semitransparent colored pigment that is used in offset inks, waterbased inks, and textile printing. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. T...展開 Benzidine Yellow G-B is a greenish yellow and semitransparent colored pigment that is used in offset inks, waterbased inks, and textile printing. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5 and a pH value of 6.0 to 7.0. 收起 | |
| Benzimidazolone Orange | Emperor Pigment Co., Ltd. | Benzimidazolone Orange is a pigment that is orange in color. It has a color index number of Pigment Orange 64 and a CAS number of 72102-84-2. This product has a heat stability value of 250 degrees Celsius, an oil absorption value of 40 to 60 grams per 100...展開 Benzimidazolone Orange is a pigment that is orange in color. It has a color index number of Pigment Orange 64 and a CAS number of 72102-84-2. This product has a heat stability value of 250 degrees Celsius, an oil absorption value of 40 to 60 grams per 100 grams, and is used in paints and printing inks. 收起 | |
| Benzimidazolone Orange HL | Emperor Pigment Co., Ltd. | Benzimidazolone Orange HL is an orange colored pigment that is used in offset inks, solvent inks, aqueous inks, and paints. It has a color index number of Pigment Orange 36, a CAS number of 12236-62-3, and an EU number of 235-462-4. This product has a den...展開 Benzimidazolone Orange HL is an orange colored pigment that is used in offset inks, solvent inks, aqueous inks, and paints. It has a color index number of Pigment Orange 36, a CAS number of 12236-62-3, and an EU number of 235-462-4. This product has a density value of 1.4 and a pH value of 6.5. 收起 | |
| Cardanol | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...展開 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. 收起 | |
| Dispersion Agent BLK-9918 | BELIKE Chemical Co.,Ltd. | Dispersion Agent BLK-9918 is a coating additive that is in the form of a yellow or brown liquid. This product is most commonly used as a dispersion agent in water-based paint, inks, and water-based acrylic resins. | |
| Fast Blue B | Emperor Pigment Co., Ltd. | Fast Blue B is a pigment that is reddish in color. It has a color index number of Pigment Blue 15, a CAS number of 147-14-8, and an EU number of 205-685-1. This product has a density value of 1.5, a pH value of 7, and is used in offset inks, aqueous inks,...展開 Fast Blue B is a pigment that is reddish in color. It has a color index number of Pigment Blue 15, a CAS number of 147-14-8, and an EU number of 205-685-1. This product has a density value of 1.5, a pH value of 7, and is used in offset inks, aqueous inks, and paints. 收起 | |
| Fast Blue BGNCF | Emperor Pigment Co., Ltd. | Fast Blue BGNCF is a greenish colored pigment that is used in inks. It has a density value of 1.5 and a pH value of 7. This product has a color index number of Pigment Blue 15:4, a CAS number of 147-14-8, and an EU number of 205-685-1. | |
| Fast Blue BGS | Emperor Pigment Co., Ltd. | Fast Blue BGS is a pigment that is greenish in color. It has a color index number of Pigment Blue 15:3, a CAS number of 122390-87-1, and an EU number of 205-685-1. This product has a density value of 1.5, a pH value of 7, and is used in offset inks. | |
| Fast Blue BS | Emperor Pigment Co., Ltd. | Fast Blue BS is a reddish colored pigment that is used in paints and inks. It has a color index number of Pigment Blue 15:1, a CAS number of 12239-87-1, and an EU number of 205-685-1. This product has a density value of 1.5 and a pH value of 7. | |
| Fast Blue Lake | Emperor Pigment Co., Ltd. | Fast Blue Lake is a blue colored pigment that is used in offset inks, waterbased inks, solvent based inks, and Toluene based inks. It has a heat value of 100 degrees Celsius and an oil absorption value of 30 maximum. This product has a color index number ...展開 Fast Blue Lake is a blue colored pigment that is used in offset inks, waterbased inks, solvent based inks, and Toluene based inks. It has a heat value of 100 degrees Celsius and an oil absorption value of 30 maximum. This product has a color index number of Pigment Blue 17, and a CAS number of 71799-04-7. 收起 | |
| Fast Blue Lake BO | Emperor Pigment Co., Ltd. | Fast Blue Lake BO is a blue colored pigment that is used in offset inks. It has a color index number of Pigment Blue 1, and a CAS number of 1325-87-7. This product has a heat value of 140 degrees Celsius and an oil absorption value of less than 45. | |
| Fast Blue Toner | Emperor Pigment Co., Ltd. | Fast Blue Toner is a reddish colored pigment that is used in offset inks, aqueous inks, and solvent inks. It has a density value of 1.6 and a pH value of 7. This product has a color index number of Pigment Blue 1, a CAS number of 1325-410-7, and an EU num...展開 Fast Blue Toner is a reddish colored pigment that is used in offset inks, aqueous inks, and solvent inks. It has a density value of 1.6 and a pH value of 7. This product has a color index number of Pigment Blue 1, a CAS number of 1325-410-7, and an EU number of 215-410-7. 收起 | |
| Fast Blue Toner R | Emperor Pigment Co., Ltd. | Fast Blue Toner R is a pigment that is blue in color. It has a color index number of Pigment Blue 10 and a CAS number of 71798-70-4. This product has a density value of 1.8, a pH value of 6, and is used in offset inks, solvent inks, and aqueous inks. | |
| Fast Milori Blue | Emperor Pigment Co., Ltd. | Fast Milori Blue is a pigment that is blue in color. It has a color index number of Pigment Blue 27, and a CAS number of 14038-43-8. This product has a density value of 1.7 to 1.8, a pH value of 6.0 to 8.0, and is used in offset inks, solvent based paints...展開 Fast Milori Blue is a pigment that is blue in color. It has a color index number of Pigment Blue 27, and a CAS number of 14038-43-8. This product has a density value of 1.7 to 1.8, a pH value of 6.0 to 8.0, and is used in offset inks, solvent based paints, and waterbased paints. 收起 | |
| Fast Orange G | Emperor Pigment Co., Ltd. | Fast Orange G is a pigment that is yellowish transparent in color. It has a color index number of Pigment Orange 13, a CAS number of 3520-72-7, and an EU number of 222-530-3. This product has a density value of 1.5, a pH value of 7, and is used in solvent...展開 Fast Orange G is a pigment that is yellowish transparent in color. It has a color index number of Pigment Orange 13, a CAS number of 3520-72-7, and an EU number of 222-530-3. This product has a density value of 1.5, a pH value of 7, and is used in solvent inks. 收起 | |
| Fast Orange G-R | Emperor Pigment Co., Ltd. | Fast Orange G-R is an orange colored pigment that is used in surface printing inks. It has a color index number of Pigment Orange 13, and a heat resistance value of 160 degrees Celsius. | |
| Fast Orange GRN (Semi-Tr) | Emperor Pigment Co., Ltd. | Fast Orange GRN (Semi-Tr) is a pigment that is orange in color. It has a color index number of Pigment Orange 16, a heat resistance value of 180 degrees Celsius, and is used in offset inks and waterbased inks. | |
| Fast Orange GRN-P(Tr)16 | Emperor Pigment Co., Ltd. | Fast Orange GRN-P(Tr)16 is an orange colored pigment that is used in surface printing inks and inner printing inks. It has a heat resistance value of 180 degrees Celsius and a color index number of Pigment Orange 16. | |
| Fast Orange OP-213(OP) | Emperor Pigment Co., Ltd. | Fast Orange OP-213(OP) is a pigment that is orange in color. It has a color index number of Pigment Orange 34, and a CAS number of 15793-73-4. This product has a density value of 1.40 to 1.45, a pH value of 6.0 to 8.0, and is used in waterbased inks and o...展開 Fast Orange OP-213(OP) is a pigment that is orange in color. It has a color index number of Pigment Orange 34, and a CAS number of 15793-73-4. This product has a density value of 1.40 to 1.45, a pH value of 6.0 to 8.0, and is used in waterbased inks and oil based ink. 收起 | |
| Fast Orange RL-TR | Emperor Pigment Co., Ltd. | Fast Orange RL-TR is a pigment that is reddish in color. It has a color index number of Pigment Orange 34, a CAS number of 15793-72-4, and an EU number of 239-898-6. This product has a density value of 1.4, a pH value of 6.5, and is used in aqueous inks a...展開 Fast Orange RL-TR is a pigment that is reddish in color. It has a color index number of Pigment Orange 34, a CAS number of 15793-72-4, and an EU number of 239-898-6. This product has a density value of 1.4, a pH value of 6.5, and is used in aqueous inks and aqueous coatings. 收起 | |
| Fast Orange RL-T(Tr) | Emperor Pigment Co., Ltd. | Fast Orange RL-T(Tr) is a pigment that is reddish in color. It has a color index number of Pigment Orange 34, a CAS number of 15793-72-4, and an EU number of 239-898-6. This product has a density value of 1.4, a pH value of 6,5, and is used in solvent ink...展開 Fast Orange RL-T(Tr) is a pigment that is reddish in color. It has a color index number of Pigment Orange 34, a CAS number of 15793-72-4, and an EU number of 239-898-6. This product has a density value of 1.4, a pH value of 6,5, and is used in solvent inks, aqueous inks, and aqueous coatings. 收起 | |
| Fast Orange RL(Semi-Tr) | Emperor Pigment Co., Ltd. | Fast Orange RL(Semi-Tr) is an orange colored pigment that is used in waterbased inks. It has a color index number of Pigment Orange 34, a density value of 1.6, and a pH value of 6.0 to 7.0. | |
| Fast Orange RN | Emperor Pigment Co., Ltd. | Fast Orange RN is an orange colored pigment that is used in aqueous inks and air drying paints. It has a color index number of Pigment Orange 5, a CAS number of 3468-63-1, and an EU number of 222-429-4. This product has a density value of 1.4 and a pH val...展開 Fast Orange RN is an orange colored pigment that is used in aqueous inks and air drying paints. It has a color index number of Pigment Orange 5, a CAS number of 3468-63-1, and an EU number of 222-429-4. This product has a density value of 1.4 and a pH value of 5.5. 收起 | |
| Fast Red BBC-S | Emperor Pigment Co., Ltd. | Fast Red BBC-S is a pigment that is bluish red in color. It has a color index number of Pigment Red 48:2, a CAS number of 7023-61-2, and an EU number of 230-303-5. This product has a density value of 1.8, a pH value of 7.0 to 8.0, and is used in NC inks, ...展開 Fast Red BBC-S is a pigment that is bluish red in color. It has a color index number of Pigment Red 48:2, a CAS number of 7023-61-2, and an EU number of 230-303-5. This product has a density value of 1.8, a pH value of 7.0 to 8.0, and is used in NC inks, PA inks, and PP inks. 收起 | |
| Fast Red BBN | Emperor Pigment Co., Ltd. | Fast Red BBN is a yellowish red colored pigment that is used in offset inks. It has a density value of 1.8 and a pH value of 7.0 to 8.0. This product has a color index number of Pigment Red 48:1, a CAS number of 7585-41-3, and an EU number of 231-494-8. | |
| Fast Red BBN-W | Emperor Pigment Co., Ltd. | Fast Red BBN-W is a pigment that is yellowish red in color. It has a color index number of Pigment Red 48:1, a CAS number of 7858-41-3, and an EU number of 231-494-8. This product has a density value of 1.8, a pH value of 7.0 to 8.0, and is used in waterb...展開 Fast Red BBN-W is a pigment that is yellowish red in color. It has a color index number of Pigment Red 48:1, a CAS number of 7858-41-3, and an EU number of 231-494-8. This product has a density value of 1.8, a pH value of 7.0 to 8.0, and is used in waterbased inks and in offset inks. 收起 | |
| Fast Red BBS-W | Emperor Pigment Co., Ltd. | Fast Red BBS-W is a pigment that is red in color. It has a color index number of Pigment Red 48:3, a CAS number of 15782-05-5, and an EU number of 239-879-2. This product has a density value of 1.8, a pH value of 7.0 to 8.0, and is used in waterbased inks...展開 Fast Red BBS-W is a pigment that is red in color. It has a color index number of Pigment Red 48:3, a CAS number of 15782-05-5, and an EU number of 239-879-2. This product has a density value of 1.8, a pH value of 7.0 to 8.0, and is used in waterbased inks. 收起 | |
| Fast Red F2R | Emperor Pigment Co., Ltd. | Fast Red F2R is a yellowish red colored pigment that is used in waterbased inks and in textile printing. It has a color index number of Pigment Red 2, a CAS number of 6041-94-7, and an EU number of 227-930-1. This product has a density value of 1.5 and a ...展開 Fast Red F2R is a yellowish red colored pigment that is used in waterbased inks and in textile printing. It has a color index number of Pigment Red 2, a CAS number of 6041-94-7, and an EU number of 227-930-1. This product has a density value of 1.5 and a pH value of 6.5 to 7.5. 收起 | |
| Fast Red F4R | Emperor Pigment Co., Ltd. | Fast Red F4R is a bluish red colored pigment that is used in textile printing and waterbased inks. It has a density value of 1.5 and a pH value of 6.5 to 7.5. This product has a color index number of Pigment Red 8, a CAS number of 6410-60-6, and an EU num...展開 Fast Red F4R is a bluish red colored pigment that is used in textile printing and waterbased inks. It has a density value of 1.5 and a pH value of 6.5 to 7.5. This product has a color index number of Pigment Red 8, a CAS number of 6410-60-6, and an EU number of 229-100-4. 收起 | |
| Fast Red N | Emperor Pigment Co., Ltd. | Fast Red N is a pigment that is yellowish red in color. It has a color index number of Pigment Red 22, a CAS number of 6448-95-9, and an EU number of 229-245-3. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used in waterbased i...展開 Fast Red N is a pigment that is yellowish red in color. It has a color index number of Pigment Red 22, a CAS number of 6448-95-9, and an EU number of 229-245-3. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used in waterbased inks. 收起 | |
| Fast Red Toner 6BMW | Emperor Pigment Co., Ltd. | Fast Red Toner 6BMW is a pigment that is violet in color. It has a color index number of Pigment Violet 2, a CAS number of 1326-04-1, and an EU number of 215-414-9. This product has a density value of 1.8, a pH value of 6, and is used in aqueous inks and ...展開 Fast Red Toner 6BMW is a pigment that is violet in color. It has a color index number of Pigment Violet 2, a CAS number of 1326-04-1, and an EU number of 215-414-9. This product has a density value of 1.8, a pH value of 6, and is used in aqueous inks and coating. 收起 | |
| Fast Rose Lake | Emperor Pigment Co., Ltd. | Fast Rose Lake is a violet colored pigment that is used in aqueous inks. It has a density value of 1.7 and a pH value of 7. This product has a color index number of Pigment Violet 1, a CAS number of 1326-03-0, and an EU number of 215-413-3. | |
| Fast Rose Toner | Emperor Pigment Co., Ltd. | Fast Rose Toner is a violet colored pigment that is used in offset inks and aqueous inks. It has a density value of 1.7 and a pH value of 7. This product has a color index number of Pigment Violet 1, a CAS number of 1326-03-0, and an EU number of 215-413-...展開 Fast Rose Toner is a violet colored pigment that is used in offset inks and aqueous inks. It has a density value of 1.7 and a pH value of 7. This product has a color index number of Pigment Violet 1, a CAS number of 1326-03-0, and an EU number of 215-413-3. 收起 | |
| Fast Rose Toner 6BMW | Emperor Pigment Co., Ltd. | Fast Rose Toner 6BMW is a pigment that is violet in color. It has a color index number of Pigment Violet 2, a CAS number of 1326-04-1, and an EU number of 215-414-9. This product has a density value of 1.8, a pH value of 6, and is used in aqueous inks and...展開 Fast Rose Toner 6BMW is a pigment that is violet in color. It has a color index number of Pigment Violet 2, a CAS number of 1326-04-1, and an EU number of 215-414-9. This product has a density value of 1.8, a pH value of 6, and is used in aqueous inks and aqueous coatings. 收起 | |
| Fast Violet 4R | Emperor Pigment Co., Ltd. | Fast Violet 4R is a pigment that is violet in color. It has a color index number of Pigment Violet 19, and a CAS number of 1047-16-1. This product has a density value of 1.5, a pH value of 6.8, and is used in coloring printing inks, paints, and pigment pr...展開 Fast Violet 4R is a pigment that is violet in color. It has a color index number of Pigment Violet 19, and a CAS number of 1047-16-1. This product has a density value of 1.5, a pH value of 6.8, and is used in coloring printing inks, paints, and pigment printing. 收起 | |
| Fast Violet Lake | Emperor Pigment Co., Ltd. | Fast Violet Lake is a reddish colored pigment that is used in offset inks, aqueous inks, and solvent inks. It has a color index number of Pigment Violet 3, a CAS number of 1325-82-2, and an EU number of 273-548-3. This product has a density value of 1.8 a...展開 Fast Violet Lake is a reddish colored pigment that is used in offset inks, aqueous inks, and solvent inks. It has a color index number of Pigment Violet 3, a CAS number of 1325-82-2, and an EU number of 273-548-3. This product has a density value of 1.8 and a pH value of 6. 收起 | |
| Fast Violet Toner R | Emperor Pigment Co., Ltd. | Fast Violet Toner R is a bluish colored pigment that is used in offset inks and aqueous inks. It has a color index number of Pigment Violet 3, a CAS number of 1325-82-2, and an EU number of 273-548-3. This product has a density value of 1.8 and a pH value...展開 Fast Violet Toner R is a bluish colored pigment that is used in offset inks and aqueous inks. It has a color index number of Pigment Violet 3, a CAS number of 1325-82-2, and an EU number of 273-548-3. This product has a density value of 1.8 and a pH value of 6. 收起 | |
| Fast Yellow 10G | Emperor Pigment Co., Ltd. | Fast Yellow 10G is a greenish yellow colored pigment that is used in air drying paints, offset inks, industrial paints, and in waterbased coatings. It has a density value of 1.6 and a pH value of 6.0 to 7.0. This product has a color index number of Pigmen...展開 Fast Yellow 10G is a greenish yellow colored pigment that is used in air drying paints, offset inks, industrial paints, and in waterbased coatings. It has a density value of 1.6 and a pH value of 6.0 to 7.0. This product has a color index number of Pigment Yellow 3, a CAS number of 6486-23-2, and an EU number of 229-355-1. 收起 | |
| Fast Yellow G | Emperor Pigment Co., Ltd. | Fast Yellow G is a pigment that is bright yellow in color. It has a color index number of Pigment Yellow 1, a CAS number of 2512-29-0, and an EU number of 219-730-8. This product has a density value of 1.6, a pH value of 6.0 to 7.0, and is used in air dry...展開 Fast Yellow G is a pigment that is bright yellow in color. It has a color index number of Pigment Yellow 1, a CAS number of 2512-29-0, and an EU number of 219-730-8. This product has a density value of 1.6, a pH value of 6.0 to 7.0, and is used in air drying paints, offset inks, industrial paints, and in waterbased coatings. 收起 | |
| Fumed Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....展開 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 收起 | |
| Hydroxypropyl Aistarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive. | |
| Methyltriethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silico...展開 Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silicone resins and silicone rubber,silicone resins and silicone rubber. 收起 | |
| Methyltrimethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainl...展開 Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainly used as the crosslinking agent of room temperature vulcanized silicone rubber, as well as the glass fiber surface treatment agent and reinforced plastic laminate treatment agent, in order to improve the mechanical strength of products, heat resistance, moisture resistance. 收起 | |
| Milecell 60 HPMC | MPI Chemie B.V. | Milecell 60 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 60 HPMC acts as a thickener, water ...展開 Milecell 60 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 60 HPMC acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. 收起 | |
| Milecell 65 HPMC | MPI Chemie B.V. | Milecell 65 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 65 HPMC acts as a thickener, water ...展開 Milecell 65 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 65 HPMC acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. 收起 | |
| Milecell 75 HPMC | MPI Chemie B.V. | Milecell 75 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 75 HPMC acts as a thickener, water ...展開 Milecell 75 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 75 HPMC acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. 收起 | |
| Milecell EC Standard | MPI Chemie B.V. | Milecell EC Standard is ethyl cellulose in the form of a white powder or granules. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell EC Standard acts as a thickener, water retention agent, suspension aid, and c...展開 Milecell EC Standard is ethyl cellulose in the form of a white powder or granules. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell EC Standard acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. 收起 | |
| Modified Starch - Compound Active Printing Paste | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological pro...展開 Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Modified Starch - High End | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holdi...展開 Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. 收起 | |
| Modified Starch - Mid Range | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, ...展開 Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| MPI Bright 100 | MPI Chemie B.V. | MPI Bright 100 is an optical brightener in the form of a yellowish powder. It is used as a whitening agent in paints and inks. MPI Bright 100 is designed to brighten colors and mask yellowing in desired applications. | |
| MPI Bright 200 | MPI Chemie B.V. | MPI Bright 200 is an optical brightener in the form of a bright yellow crystal powder. It is used as a whitening agent in paints and inks. MPI Bright 200 is designed to brighten colors and mask yellowing in desired applications. | |
| MPI Bright 300 | MPI Chemie B.V. | MPI Bright 300 is an optical brightener in the form of a yellowish-green powder. It is used as a whitening agent in paints and inks. MPI Bright 300 is designed to brighten colors and mask yellowing in desired applications. | |
| MPI Bright 420 | MPI Chemie B.V. | MPI Bright 420 is an optical brightener in the form of a yellowish green crystalline powder. It is used as a whitening agent in paints and inks. MPI Bright 420 is designed to brighten colors and mask yellowing in desired applications. | |
| MPI Bright 450 | MPI Chemie B.V. | MPI Bright 450 is an optical brightener in the form of a yellowish green crystalline powder. It is used as a whitening agent in paints and inks. MPI Bright 450 is designed to brighten colors and mask yellowing in desired applications. | |
| MPI Bright CBS-X | MPI Chemie B.V. | MPI Bright CBS-X is an optical brightener in the form of a yellowish crystal powder. It is used as a whitening agent in paints and inks. MPI Bright CBS-X is designed to brighten colors and mask yellowing in desired applications. | |
| MPI Bright ER-1 | MPI Chemie B.V. | MPI Bright ER-1 is an optical brightener in the form of a yellowish crystal powder. It is used as a whitening agent in paints and inks. MPI Bright ER-1 is designed to brighten colors and mask yellowing in desired applications. | |
| MPI Bright ER-2 | MPI Chemie B.V. | MPI Bright ER-2 is an optical brightener in the form of a pale yellow powder. It is used as a whitening agent in paints and inks. MPI Bright ER-2 is designed to brighten colors and mask yellowing in desired applications. | |
| MPI Bright ER-3 | MPI Chemie B.V. | MPI Bright ER-3 is an optical brightener in the form of a yellowish green crystal powder. It is used as a whitening agent in paints and inks. MPI Bright ER-3 is designed to brighten colors and mask yellowing in desired applications. | |
| MPI Bright FP 127 | MPI Chemie B.V. | MPI Bright FP 127 is an optical brightener in the form of a light yellow powder. It is used as a whitening agent in paints and inks. MPI Bright FP 127 is designed to brighten colors and mask yellowing in desired applications. | |
| Nano Silver Powder TFNP-30 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Nano Silver Powder TFNP-30 is a moderate tap density,high dispersion, spherical nanometer silver powder. TFNP-30 is ideal for low-temperature sintering paste, low silver content and high conductive paste, and touchscreen slurry. | |
| Nano Silver Powder TFNP-80 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Nano Silver Powder TFNP-80 is a moderate tap density, nanoscale spherical monodisperse silver. It is mainly used as an additive material. | |
| ND-22 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | ND-22 is used as cross-linking agent for RTV Silicone Rubber and reinforcing for epoxy fiber glass reinforced plastics, viscosity increaser for synthetic resin and raw stuff fabric racked agent. | |
| Permanent Yellow 1301 | Emperor Pigment Co., Ltd. | Permanent Yellow 1301 is a pigment that is reddish yellow and transparent in color. It has a color index number of Pigment Yellow 13, a CAS number of 5102-83-0, and an EU number of 225-822-9. This product has a density value of 1.6, a pH value of 6.0 to 7...展開 Permanent Yellow 1301 is a pigment that is reddish yellow and transparent in color. It has a color index number of Pigment Yellow 13, a CAS number of 5102-83-0, and an EU number of 225-822-9. This product has a density value of 1.6, a pH value of 6.0 to 7.0, and is used in NC inks, PA inks, offset inks, and PP inks. 收起 | |
| Permanent Yellow 1401 | Emperor Pigment Co., Ltd. | Permanent Yellow 1401 is a pigment that is bright yellow in color. It has a color index number of Pigment Yellow 14, a CAS number of 5468-75-7, and an EU number of 226-789-3. This product has a density value of 1.6, a pH value of 6.0 to 7.0, and is used i...展開 Permanent Yellow 1401 is a pigment that is bright yellow in color. It has a color index number of Pigment Yellow 14, a CAS number of 5468-75-7, and an EU number of 226-789-3. This product has a density value of 1.6, a pH value of 6.0 to 7.0, and is used in PA inks, NC inks, and PP inks. 收起 | |
| Permanent Yellow 2G | Emperor Pigment Co., Ltd. | Permanent Yellow 2G is a pigment that is greenish yellow and transparent in color. It has a color index number of Pigment Yellow 17, a CAS number of 4531-49-1, and an EU number of 224-867-1. This product has a density value of 1.6, a pH value of 6.0 to 7....展開 Permanent Yellow 2G is a pigment that is greenish yellow and transparent in color. It has a color index number of Pigment Yellow 17, a CAS number of 4531-49-1, and an EU number of 224-867-1. This product has a density value of 1.6, a pH value of 6.0 to 7.0, and is used in offset inks. 收起 | |
| Permanent Yellow 2GS | Emperor Pigment Co., Ltd. | Permanent Yellow 2GS is a greenish yellow colored pigment that is used in offset inks, textile printing, and waterbased inks. It has a density value of 1.6 and a pH value of 6.0 to 7.0. This product has a color index number of Pigment Yellow 14, a CAS num...展開 Permanent Yellow 2GS is a greenish yellow colored pigment that is used in offset inks, textile printing, and waterbased inks. It has a density value of 1.6 and a pH value of 6.0 to 7.0. This product has a color index number of Pigment Yellow 14, a CAS number of 5468-75-7, and an EU number of 226-789-3. 收起 | |
| Permanent Yellow 5GX | Emperor Pigment Co., Ltd. | Permanent Yellow 5GX is a pigment that is bright yellow in color. It has a color index number of Pigment Yellow 74, a CAS number of 6358-31-2, and an EU number of 228-768-4. This product has a density value of 1.6, a pH value of 6.0 to 7.0, and is used in...展開 Permanent Yellow 5GX is a pigment that is bright yellow in color. It has a color index number of Pigment Yellow 74, a CAS number of 6358-31-2, and an EU number of 228-768-4. This product has a density value of 1.6, a pH value of 6.0 to 7.0, and is used in industrial paints, waterbased paints, and waterbased inks. 收起 | |
| Permanent Yellow G-W | Emperor Pigment Co., Ltd. | Permanent Yellow G-W is a bright yellow colored pigment that is used in waterbased inks and textile printing. It has a color index number of Pigment Yellow 14, a CAS number of 5468-75-7, and an EU number of 226-789-3. This product has a density value of 1...展開 Permanent Yellow G-W is a bright yellow colored pigment that is used in waterbased inks and textile printing. It has a color index number of Pigment Yellow 14, a CAS number of 5468-75-7, and an EU number of 226-789-3. This product has a density value of 1.6 and a pH value of 6.0 to 7.0. 收起 | |
| Permanent Yellow GR | Emperor Pigment Co., Ltd. | Permanent Yellow GR is a reddish yellow and semitransparent colored pigment that is used in offset inks, waterbased inks, and textile printing. It has a color index number of Pigment Yellow 13, a CAS number of 5102-83-0, and an EU number of 225-822-9. Thi...展開 Permanent Yellow GR is a reddish yellow and semitransparent colored pigment that is used in offset inks, waterbased inks, and textile printing. It has a color index number of Pigment Yellow 13, a CAS number of 5102-83-0, and an EU number of 225-822-9. This product has a density value of 1.5 and a pH value of 6.0 to 7.0. 收起 | |
| Phthalo Blue BGSF | Emperor Pigment Co., Ltd. | Phthalo Blue BGSF is a pigment that is blue in color. It has a color index number of Pigment Blue 15:4, a heat resistance value of 250 degrees Celsius, and an oil absorption value of less than 35 grams per 100 grams. This product is used in inks and solve...展開 Phthalo Blue BGSF is a pigment that is blue in color. It has a color index number of Pigment Blue 15:4, a heat resistance value of 250 degrees Celsius, and an oil absorption value of less than 35 grams per 100 grams. This product is used in inks and solvent based paints. 收起 | |
| Precipitated Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixi...展開 Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixing solutions of sodium silicate with sulfuric acid in water. A chemical reaction occurs, and pellets of pure silica form. 收起 | |
| PVB | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PV...展開 Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PVB has high transparency, good cold resistance, water resistance, film forming properties and impact resistance, widely used in middle film of glass, ceramic flower paper, metal protective paint, tipping paper, aluminum foil, insulation paint, fiber treatment agent, finished parts, printing inks, dyes and so on. 收起 | |
| PVC Paste | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | PVC Paste is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , go...展開 PVC Paste is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , good electrical insulation , thermoplasticity and membrane forming capacity. They are essential materials for preparing PVC compounds. By adding blending agents and employing different techniques, they can be made into rigid or non-rigid PVC products and are suppliable in a wide range of transparent, translucent, and opaque colours. 收起 | |
| Quinacridone Violet | Emperor Pigment Co., Ltd. | Quinacridone Violet is a pigment that is violet in color. It has a color index number of Pigment Violet 19, a CAS number of 1047-16-1, and an EU number of 213-879-2. This product has a density value of 1.7, a pH value of 7, and is used in coloring printin...展開 Quinacridone Violet is a pigment that is violet in color. It has a color index number of Pigment Violet 19, a CAS number of 1047-16-1, and an EU number of 213-879-2. This product has a density value of 1.7, a pH value of 7, and is used in coloring printing inks, paints, and pigment printing. 收起 | |
| Refined Fatty Acid | Zouping Tianxing Chemical Industry Co., Ltd. | Refined Fatty Acid, in the form of a clear liquid, is a high-quality raw material that can be used in coatings and printing inks. Its iodine value lies between 50 and 60, and it contains between 210 and 225 mg of potassium hydroxide per gram. | |
| Refined Glycerine | Zouping Tianxing Chemical Industry Co., Ltd. | Refined Glycerine, in the form of a transparent liquid without suspended precipitates, is a raw material that can be used in paints, textiles, printing and dyeing. This product's density is greater than 1.2481 g/ml and it contains no more than 0.05% ash. | |
| SCA-Y25E | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of t...展開 SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. SCA-Y25E can be used in a number of applications. 收起 | |
| SCA-Y25M | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion o...展開 SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. It can be used in a number of applications. 收起 | |
| Silane ATPN-1100 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to ...展開 Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to substrates. The primary amine function reacts with a wide array of thermoset, thermoplastic, and elastomeric materials. 收起 | |
| Silane ATPN-1110 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion an...展開 Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion and wet ability of filler in the high molecular materials. ATPN-1110 is an excellent promoter of adhesion and sealant (such as polyurethane, epoxy, and phenol). In the glass wool and FRP products, it can be added into phenol resins to improve the wet resistance and mechanical performance. 收起 | |
| Silane ATPN-1120 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of...展開 Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone-polymers or as crosslinker (moisture crosslinking of polymers). The application as“coupling agent”leads in general to an improvement of mechanical and electrical product properties above all under exposure to heat and/or moisture. 收起 | |
| Silane Coupling Agent Si-69 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strengt...展開 Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strength, tearing strength and abrasive resistance and reduce compression set of vulcanizates. In addition, it can reduce the viscosity and improve the processability of rubber products. Si-69 is especially suitable to improve the reinforcing properties of fillers that contain hydroxyl groups in all unsaturated polymers having double bonds or their blends. 收起 | |
| SILICONE FLUID ATPN-100 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICON...展開 SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-100 is ideal for use in a wide range of applications. 收起 | |
| SILICONE FLUID ATPN-1000 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICO...展開 SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-1000 is ideal for use in a wide range of applications. 收起 | |
| UVB2000 Special Tertiary Amine Acrylate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVB2000 Special Tertiary Amine Acrylate is a difunctional amine coinitiator which, when used in conjunction with a photosensitizer such as benzophenone, promotes rapid curing under UV light. Additional benefits include reduced odors, both at press side an...展開 UVB2000 Special Tertiary Amine Acrylate is a difunctional amine coinitiator which, when used in conjunction with a photosensitizer such as benzophenone, promotes rapid curing under UV light. Additional benefits include reduced odors, both at press side and in the cured film, and reduced blooming. It is ideal for use in a wide range of applications. 收起 | |
| UVB2200 Reactive Amine Acrylate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVB2200 Reactive Amine Acrylate is a very low viscosity, highly reactive amine modified polyetheracrylate oligomer for use in UV and EB curing systems. UVB2200 can be used as the sole binder or with monomer diluents. It is ideal for use in a wide range of...展開 UVB2200 Reactive Amine Acrylate is a very low viscosity, highly reactive amine modified polyetheracrylate oligomer for use in UV and EB curing systems. UVB2200 can be used as the sole binder or with monomer diluents. It is ideal for use in a wide range of applications. 收起 | |
| UVE3216 Modified Epoxy Acrylate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVE3216 Modified Epoxy Acrylate is a high molecular weight, acid modified epoxy acrylate. It blended with 10% tripropylene glycol diacrylate. It allows high gloss, fast cure response, higher flexibility and low shrikage. UVE3216 is ideal for use in a wide...展開 UVE3216 Modified Epoxy Acrylate is a high molecular weight, acid modified epoxy acrylate. It blended with 10% tripropylene glycol diacrylate. It allows high gloss, fast cure response, higher flexibility and low shrikage. UVE3216 is ideal for use in a wide range of applications. 收起 | |
| UVU 6451 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVU 6451 is a tetrafunctional aliphatic urethane acrylate oligomer developed for UV/EB-cured coatings and inks. It imparts hardness, very fast cure response, and non-yellowing characteristics to these applications. | |
| UVU6219 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVU6219 is an aliphatic polyester based urethane diacrylate oligomer blended with 20% TPGDA, tripropylene glycol diacrylate. It is a flexible oligomer offering good weatherability, and low skin irritation. UVU6219 is ideal for use in a wide range of appli...展開 UVU6219 is an aliphatic polyester based urethane diacrylate oligomer blended with 20% TPGDA, tripropylene glycol diacrylate. It is a flexible oligomer offering good weatherability, and low skin irritation. UVU6219 is ideal for use in a wide range of applications. 收起 |
