UL Prospector

成功!

成功保存搜索結果
99.99% Conductive Shining Flake Silver Powder Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展開 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起
99.99% Conductive Silver Powder (Spherical) Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications.
Acetylated Distarch Ddipate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive.
Acetylated Distarch Phosphate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展開 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起
Alkylsulfonic Acid Ester of Phenol Plasticizer Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC.
Cardanol Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...展開 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. 收起
Dispersion Agent BLK-9918 BELIKE Chemical Co.,Ltd. Dispersion Agent BLK-9918 is a coating additive that is in the form of a yellow or brown liquid. This product is most commonly used as a dispersion agent in water-based paint, inks, and water-based acrylic resins.
Fumed Silica Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....展開 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 收起
Hydroxypropyl Aistarch Phosphate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive.
Intechem-01 Shanghai Intechem Corporation Co., Ltd. Intechem-01 is a yellowish or amber viscous liquid that is a perfluoroalkyl alcohol ether amine salt-type anionic fluorocarbon surfactant. This product is water-soluble, can improve humidity, proliferation, emulsification, penetration, performance, and ca...展開 Intechem-01 is a yellowish or amber viscous liquid that is a perfluoroalkyl alcohol ether amine salt-type anionic fluorocarbon surfactant. This product is water-soluble, can improve humidity, proliferation, emulsification, penetration, performance, and can significantly help lower the interfacial tension in inks, coatings, and adhesives. 收起
Intechem-02 Shanghai Intechem Corporation Co., Ltd. Intechem-02 is a pale yellow liquid that is a perfluoroalkyl betaine ether zwitterionic fluorocarbon surfactant. This product can be dissolved in a variety of solvents, and can improve humidity, spreading, and emulsifying in inks, adhesives, and paints.
Intechem-03L Shanghai Intechem Corporation Co., Ltd. Intechem-03L is a light yellow or amber liquid that is a perfluoroalkyl ether quaternary ammonium salt cationic fluorocarbon surfactant. This product is water-soluble, has good chemical and thermal stability, and is used in inks, coatings, and adhesives.
Intechem-05 Shanghai Intechem Corporation Co., Ltd. Intechem-05 is a colorless transparent liquid that is a type of potassium perfluoroalkyl ether carboxylic acid anionic fluorocarbon surfactant. This product can improve humidity, spreading, and emulsifying in inks, coatings, and adhesives.
Intechem-06 Shanghai Intechem Corporation Co., Ltd. Intechem-06 is a colorless to light yellow viscous liquid that is a novel oxa perfluoroalkyl ether-type nonionic surfactant. This product can improve system performance in inks and coatings.
Intechem-07 Shanghai Intechem Corporation Co., Ltd. Intechem-07 is a pale yellow viscous liquid that is a type of alkyl ether anionic fluorocarbon surfactant. This product greatly reduces surface tension in inks, coatings, and adhesives.
Intechem-08 Shanghai Intechem Corporation Co., Ltd. Intechem-08 is a pale yellow liquid that is a perfluoroalkyl ether amine oxide cationic fluorocarbon surfactant. This product can effectively reduce the surface tension in inks, coatings, and adhesives.
Intechem-09 Shanghai Intechem Corporation Co., Ltd. Intechem-09 is a colorless transparent liquid that is a perfluoroalkyl fluorocarbon ether carboxylate surfactant. This product can effectively reduce the surface tension in inks, coatings, and adhesives.
Kimicell® KCM 1000D Kimix Chemical Co., Ltd. Kimicell® KCM 1000D is a white to off-white powder, comprised of a water-soluble sodium carboxymethyl cellulose ether. It is designed for a target viscosity minimum of 900 mPa·s, 1%. It can be used as a high-strength binder, thickener and rheology control...展開 Kimicell® KCM 1000D is a white to off-white powder, comprised of a water-soluble sodium carboxymethyl cellulose ether. It is designed for a target viscosity minimum of 900 mPa·s, 1%. It can be used as a high-strength binder, thickener and rheology controller. It finds use in many printing ink applications, providing oil resistance and good adhesion to paper. 收起
Kimicell® KCM 2000D Kimix Chemical Co., Ltd. Kimicell® KCM 2000D is a white to off-white powder, comprised of a water-soluble sodium carboxymethyl cellulose ether. It is designed for a target viscosity minimum of 1000 mPa·s, 1%. It can be used as a high-strength binder, thickener and rheology contro...展開 Kimicell® KCM 2000D is a white to off-white powder, comprised of a water-soluble sodium carboxymethyl cellulose ether. It is designed for a target viscosity minimum of 1000 mPa·s, 1%. It can be used as a high-strength binder, thickener and rheology controller. It finds use in many printing ink applications, providing oil resistance and good adhesion to paper. 收起
Kimicell® KCM 6000D Kimix Chemical Co., Ltd. Kimicell® KCM 6000D is a white to off-white powder, comprised of a water-soluble sodium carboxymethyl cellulose ether. It is designed for a target viscosity between 6000 and 9000 mPa·s, 2%. It can be used as a high-strength binder, thickener and rheology ...展開 Kimicell® KCM 6000D is a white to off-white powder, comprised of a water-soluble sodium carboxymethyl cellulose ether. It is designed for a target viscosity between 6000 and 9000 mPa·s, 2%. It can be used as a high-strength binder, thickener and rheology controller. It finds use in many printing ink applications, providing oil resistance and good adhesion to paper. 收起
Kimicell® KCM 700D Kimix Chemical Co., Ltd. Kimicell® KCM 700D is a white to off-white powder, comprised of a water-soluble sodium carboxymethyl cellulose ether. It is designed for a target viscosity minimum of 500 mPa·s, 1%. It can be used as a high-strength binder, thickener and rheology controll...展開 Kimicell® KCM 700D is a white to off-white powder, comprised of a water-soluble sodium carboxymethyl cellulose ether. It is designed for a target viscosity minimum of 500 mPa·s, 1%. It can be used as a high-strength binder, thickener and rheology controller. It finds use in many printing ink applications, providing oil resistance and good adhesion to paper. 收起
Kimicell® KCM 8000D Kimix Chemical Co., Ltd. Kimicell® KCM 8000D is a white to off-white powder, comprised of a water-soluble sodium carboxymethyl cellulose ether. It is designed for a target viscosity minimum of 10000 mPa·s, 2%. It can be used as a high-strength binder, thickener and rheology contr...展開 Kimicell® KCM 8000D is a white to off-white powder, comprised of a water-soluble sodium carboxymethyl cellulose ether. It is designed for a target viscosity minimum of 10000 mPa·s, 2%. It can be used as a high-strength binder, thickener and rheology controller. It finds use in many printing ink applications, providing oil resistance and good adhesion to paper. 收起
Kimicell® KEC 100000 Kimix Chemical Co., Ltd. Kimicell® KEC 100000 is a white to off-white powder, comprised of a surface treated, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for fast dispersion without lumping and a target viscosity between 40000 and 52000 mPa·s, 2%. It can ...展開 Kimicell® KEC 100000 is a white to off-white powder, comprised of a surface treated, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for fast dispersion without lumping and a target viscosity between 40000 and 52000 mPa·s, 2%. It can be used as a stabilizer, thickener, protective colloid, water retention agent and rheology modifier. It finds use in many applications such as wallpaper and latex adhesives, ceramic glaze binders, latex paints, caulking compound and putty, printing inks and textile printing pastes. 收起
Kimicell® KEC 100000B Kimix Chemical Co., Ltd. Kimicell® KEC 100000B is a white to off-white powder, comprised of a biostable, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for low-foaming, good opacity and a target viscosity between 40000 and 52000 mPa·s, 2%. It can be used as ...展開 Kimicell® KEC 100000B is a white to off-white powder, comprised of a biostable, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for low-foaming, good opacity and a target viscosity between 40000 and 52000 mPa·s, 2%. It can be used as a stabilizer, thickener, protective colloid, water retention agent and rheology modifier. It finds use in many applications such as wallpaper and latex adhesives, ceramic glaze binders, latex paints, caulking compound and putty, printing inks and textile printing pastes. 收起
Kimicell® KEC 10000G Kimix Chemical Co., Ltd. Kimicell® KEC 10000G is a white to off-white powder, comprised of a modified, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for a target viscosity between 40000 and 52000 mPa·s, 2%. It can be used as a stabilizer, thickener, protect...展開 Kimicell® KEC 10000G is a white to off-white powder, comprised of a modified, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for a target viscosity between 40000 and 52000 mPa·s, 2%. It can be used as a stabilizer, thickener, protective colloid, water retention agent and rheology modifier. It finds use in many applications such as wallpaper and latex adhesives, ceramic glaze binders, latex paints, caulking compound and putty, printing inks and textile printing pastes. 收起
Kimicell® KEC 150 Kimix Chemical Co., Ltd. Kimicell® KEC 150 is a white to off-white powder, comprised of a surface treated, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for fast dispersion without lumping and a target viscosity between 150 and 200 mPa·s, 2%. It can be used...展開 Kimicell® KEC 150 is a white to off-white powder, comprised of a surface treated, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for fast dispersion without lumping and a target viscosity between 150 and 200 mPa·s, 2%. It can be used as a stabilizer, thickener, protective colloid, water retention agent and rheology modifier. It finds use in many applications such as wallpaper and latex adhesives, ceramic glaze binders, latex paints, caulking compound and putty, printing inks and textile printing pastes. 收起
Kimicell® KEC 150000 Kimix Chemical Co., Ltd. Kimicell® KEC 150000 is a white to off-white powder, comprised of a surface treated, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for fast dispersion without lumping and a target viscosity between 60000 and 70000 mPa·s, 2%. It can ...展開 Kimicell® KEC 150000 is a white to off-white powder, comprised of a surface treated, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for fast dispersion without lumping and a target viscosity between 60000 and 70000 mPa·s, 2%. It can be used as a stabilizer, thickener, protective colloid, water retention agent and rheology modifier. It finds use in many applications such as wallpaper and latex adhesives, ceramic glaze binders, latex paints, caulking compound and putty, printing inks and textile printing pastes. 收起
Kimicell® KEC 150000G Kimix Chemical Co., Ltd. Kimicell® KEC 150000G is a white to off-white powder, comprised of a modified, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for a target viscosity between 15000 and 20000 mPa·s, 2%. It can be used as a stabilizer, thickener, protec...展開 Kimicell® KEC 150000G is a white to off-white powder, comprised of a modified, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for a target viscosity between 15000 and 20000 mPa·s, 2%. It can be used as a stabilizer, thickener, protective colloid, water retention agent and rheology modifier. It finds use in many applications such as wallpaper and latex adhesives, ceramic glaze binders, latex paints, caulking compound and putty, printing inks and textile printing pastes. 收起
Kimicell® KEC 15000B Kimix Chemical Co., Ltd. Kimicell® KEC 15000B is a white to off-white powder, comprised of a biostable, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for low-foaming, good opacity and a target viscosity between 10000 and 12000 mPa·s, 2%. It can be used as a...展開 Kimicell® KEC 15000B is a white to off-white powder, comprised of a biostable, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for low-foaming, good opacity and a target viscosity between 10000 and 12000 mPa·s, 2%. It can be used as a stabilizer, thickener, protective colloid, water retention agent and rheology modifier. It finds use in many applications such as wallpaper and latex adhesives, ceramic glaze binders, latex paints, caulking compound and putty, printing inks and textile printing pastes. 收起
Kimicell® KEC 30000 Kimix Chemical Co., Ltd. Kimicell® KEC 30000 is a white to off-white powder, comprised of a surface treated, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for fast dispersion without lumping and a target viscosity between 15000 and 20000 mPa·s, 2%. It can b...展開 Kimicell® KEC 30000 is a white to off-white powder, comprised of a surface treated, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for fast dispersion without lumping and a target viscosity between 15000 and 20000 mPa·s, 2%. It can be used as a stabilizer, thickener, protective colloid, water retention agent and rheology modifier. It finds use in many applications such as wallpaper and latex adhesives, ceramic glaze binders, latex paints, caulking compound and putty, printing inks and textile printing pastes. 收起
Kimicell® KEC 30000B Kimix Chemical Co., Ltd. Kimicell® KEC 30000B is a white to off-white powder, comprised of a biostable, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for low-foaming, good opacity and a target viscosity between 15000 and 20000 mPa·s, 2%. It can be used as a...展開 Kimicell® KEC 30000B is a white to off-white powder, comprised of a biostable, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for low-foaming, good opacity and a target viscosity between 15000 and 20000 mPa·s, 2%. It can be used as a stabilizer, thickener, protective colloid, water retention agent and rheology modifier. It finds use in many applications such as wallpaper and latex adhesives, ceramic glaze binders, latex paints, caulking compound and putty, printing inks and textile printing pastes. 收起
Kimicell® KEC 30000G Kimix Chemical Co., Ltd. Kimicell® KEC 30000G is a white to off-white powder, comprised of a modified, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for a target viscosity between 15000 and 20000 mPa·s, 2%. It can be used as a stabilizer, thickener, protect...展開 Kimicell® KEC 30000G is a white to off-white powder, comprised of a modified, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for a target viscosity between 15000 and 20000 mPa·s, 2%. It can be used as a stabilizer, thickener, protective colloid, water retention agent and rheology modifier. It finds use in many applications such as wallpaper and latex adhesives, ceramic glaze binders, latex paints, caulking compound and putty, printing inks and textile printing pastes. 收起
Kimicell® KEC 40000G Kimix Chemical Co., Ltd. Kimicell® KEC 40000G is a white to off-white powder, comprised of a modified, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for a target viscosity between 20000 and 25000 mPa·s, 2%. It can be used as a stabilizer, thickener, protect...展開 Kimicell® KEC 40000G is a white to off-white powder, comprised of a modified, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for a target viscosity between 20000 and 25000 mPa·s, 2%. It can be used as a stabilizer, thickener, protective colloid, water retention agent and rheology modifier. It finds use in many applications such as wallpaper and latex adhesives, ceramic glaze binders, latex paints, caulking compound and putty, printing inks and textile printing pastes. 收起
Kimicell® KEC 6000 Kimix Chemical Co., Ltd. Kimicell® KEC 6000 is a white to off-white powder, comprised of a surface treated, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for fast dispersion without lumping and a target viscosity between 4500 and 6000 mPa·s, 2%. It can be u...展開 Kimicell® KEC 6000 is a white to off-white powder, comprised of a surface treated, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for fast dispersion without lumping and a target viscosity between 4500 and 6000 mPa·s, 2%. It can be used as a stabilizer, thickener, protective colloid, water retention agent and rheology modifier. It finds use in many applications such as wallpaper and latex adhesives, ceramic glaze binders, latex paints, caulking compound and putty, printing inks and textile printing pastes. 收起
Kimicell® KEC 60000 Kimix Chemical Co., Ltd. Kimicell® KEC 60000 is a white to off-white powder, comprised of a surface treated, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for fast dispersion without lumping and a target viscosity between 25000 and 33000 mPa·s, 2%. It can b...展開 Kimicell® KEC 60000 is a white to off-white powder, comprised of a surface treated, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for fast dispersion without lumping and a target viscosity between 25000 and 33000 mPa·s, 2%. It can be used as a stabilizer, thickener, protective colloid, water retention agent and rheology modifier. It finds use in many applications such as wallpaper and latex adhesives, ceramic glaze binders, latex paints, caulking compound and putty, printing inks and textile printing pastes. 收起
Kimicell® KEC 60000B Kimix Chemical Co., Ltd. Kimicell® KEC 60000B is a white to off-white powder, comprised of a biostable, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for low-foaming, good opacity and a target viscosity between 25000 and 33000 mPa·s, 2%. It can be used as a...展開 Kimicell® KEC 60000B is a white to off-white powder, comprised of a biostable, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for low-foaming, good opacity and a target viscosity between 25000 and 33000 mPa·s, 2%. It can be used as a stabilizer, thickener, protective colloid, water retention agent and rheology modifier. It finds use in many applications such as wallpaper and latex adhesives, ceramic glaze binders, latex paints, caulking compound and putty, printing inks and textile printing pastes. 收起
Kimicell® KEC 60000G Kimix Chemical Co., Ltd. Kimicell® KEC 60000G is a white to off-white powder, comprised of a modified, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for a target viscosity between 25000 and 33000 mPa·s, 2%. It can be used as a stabilizer, thickener, protect...展開 Kimicell® KEC 60000G is a white to off-white powder, comprised of a modified, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for a target viscosity between 25000 and 33000 mPa·s, 2%. It can be used as a stabilizer, thickener, protective colloid, water retention agent and rheology modifier. It finds use in many applications such as wallpaper and latex adhesives, ceramic glaze binders, latex paints, caulking compound and putty, printing inks and textile printing pastes. 收起
Kimicell® KEC 6000B Kimix Chemical Co., Ltd. Kimicell® KEC 6000B is a white to off-white powder, comprised of a biostable, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for low-foaming, good opacity and a target viscosity between 60000 and 70000 mPa·s, 2%. It can be used as a ...展開 Kimicell® KEC 6000B is a white to off-white powder, comprised of a biostable, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for low-foaming, good opacity and a target viscosity between 60000 and 70000 mPa·s, 2%. It can be used as a stabilizer, thickener, protective colloid, water retention agent and rheology modifier. It finds use in many applications such as wallpaper and latex adhesives, ceramic glaze binders, latex paints, caulking compound and putty, printing inks and textile printing pastes. 收起
Kimicell® KEC 75000B Kimix Chemical Co., Ltd. Kimicell® KEC 75000B is a white to off-white powder, comprised of a biostable, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for low-foaming, good opacity and a target viscosity between 33000 and 40000 mPa·s, 2%. It can be used as a...展開 Kimicell® KEC 75000B is a white to off-white powder, comprised of a biostable, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for low-foaming, good opacity and a target viscosity between 33000 and 40000 mPa·s, 2%. It can be used as a stabilizer, thickener, protective colloid, water retention agent and rheology modifier. It finds use in many applications such as wallpaper and latex adhesives, ceramic glaze binders, latex paints, caulking compound and putty, printing inks and textile printing pastes. 收起
Kimicell® KEC 75000G Kimix Chemical Co., Ltd. Kimicell® KEC 75000G is a white to off-white powder, comprised of a modified, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for a target viscosity between 33000 and 40000 mPa·s, 2%. It can be used as a stabilizer, thickener, protect...展開 Kimicell® KEC 75000G is a white to off-white powder, comprised of a modified, nonionic, water-soluble hydroxyethyl cellulose ether. It is designed for a target viscosity between 33000 and 40000 mPa·s, 2%. It can be used as a stabilizer, thickener, protective colloid, water retention agent and rheology modifier. It finds use in many applications such as wallpaper and latex adhesives, ceramic glaze binders, latex paints, caulking compound and putty, printing inks and textile printing pastes. 收起
Kimpigment® Iron Oxide Black 318 Kimix Chemical Co., Ltd. Kimpigment® Iron Oxide Black 318 is a spherical-shaped, inert, non-toxic inorganic pigment with good opacity, high tinting strength, good light fastness, strong absorption of UV light and fine dispersing. It is resistant to acid, lime and alkaline and is ...展開 Kimpigment® Iron Oxide Black 318 is a spherical-shaped, inert, non-toxic inorganic pigment with good opacity, high tinting strength, good light fastness, strong absorption of UV light and fine dispersing. It is resistant to acid, lime and alkaline and is widely used as colorant for paints, coatings and inks. It may be used for full shaded products, or reduced by tinting with titanium dioxide (TiO2). 收起
Kimpigment® Iron Oxide Black 330 Kimix Chemical Co., Ltd. Kimpigment® Iron Oxide Black 330 is an inert, non-toxic inorganic pigment with good opacity, high tinting strength between 95 and 105%, good light fastness, strong absorption of UV light and fine dispersing. It is resistant to acid, lime and alkaline and ...展開 Kimpigment® Iron Oxide Black 330 is an inert, non-toxic inorganic pigment with good opacity, high tinting strength between 95 and 105%, good light fastness, strong absorption of UV light and fine dispersing. It is resistant to acid, lime and alkaline and is widely used as colorant for paints, coatings and inks. It may be used for full shaded products, or reduced by tinting with titanium dioxide (TiO2). 收起
Kimpigment® Iron Oxide Black 750 Kimix Chemical Co., Ltd. Kimpigment® Iron Oxide Black 750 is an inert, non-toxic inorganic pigment with good opacity, high tinting strength between 95 and 105%, good light fastness, strong absorption of UV light and fine dispersing. It is resistant to acid, lime and alkaline and ...展開 Kimpigment® Iron Oxide Black 750 is an inert, non-toxic inorganic pigment with good opacity, high tinting strength between 95 and 105%, good light fastness, strong absorption of UV light and fine dispersing. It is resistant to acid, lime and alkaline and is widely used as colorant for paints, coatings and inks. It may be used for full shaded products, or reduced by tinting with titanium dioxide (TiO2). 收起
Kimpigment® Iron Oxide Black 790 Kimix Chemical Co., Ltd. Kimpigment® Iron Oxide Black 790 is a spherical-shaped, inert, non-toxic inorganic pigment with good opacity, high tinting strength, good light fastness, strong absorption of UV light and fine dispersing. It is resistant to acid, lime and alkaline and is ...展開 Kimpigment® Iron Oxide Black 790 is a spherical-shaped, inert, non-toxic inorganic pigment with good opacity, high tinting strength, good light fastness, strong absorption of UV light and fine dispersing. It is resistant to acid, lime and alkaline and is widely used as colorant for paints, coatings and inks. It may be used for full shaded products, or reduced by tinting with titanium dioxide (TiO2). 收起
Kimpigment® Micronized Iron Oxide Black 318M Kimix Chemical Co., Ltd. Kimpigment® Micronized Iron Oxide Black 318M is a micronized black pigment. It has good opacity, high tinting strength between 97 and 103%, good light fastness, strong absorption of UV light and fine dispersing. It is widely used as colorant for paints, i...展開 Kimpigment® Micronized Iron Oxide Black 318M is a micronized black pigment. It has good opacity, high tinting strength between 97 and 103%, good light fastness, strong absorption of UV light and fine dispersing. It is widely used as colorant for paints, inks and coatings. It may be used for full shaded products, or reduced by tinting with titanium dioxide (TiO2). 收起
Kimpigment® Micronized Iron Oxide Red 105M Kimix Chemical Co., Ltd. Kimpigment® Micronized Iron Oxide Red 105M is a micronized red pigment. It has good opacity, high tinting strength between 97 and 103%, good light fastness, strong absorption of UV light and fine dispersing. It is widely used as colorant for paints, inks ...展開 Kimpigment® Micronized Iron Oxide Red 105M is a micronized red pigment. It has good opacity, high tinting strength between 97 and 103%, good light fastness, strong absorption of UV light and fine dispersing. It is widely used as colorant for paints, inks and coatings. It may be used for full shaded products, or reduced by tinting with titanium dioxide (TiO2). 收起
Kimpigment® Micronized Iron Oxide Red 110M Kimix Chemical Co., Ltd. Kimpigment® Micronized Iron Oxide Red 110M is a micronized red pigment. It has good opacity, high tinting strength between 97 and 103%, good light fastness, strong absorption of UV light and fine dispersing. It is widely used as colorant for paints, inks ...展開 Kimpigment® Micronized Iron Oxide Red 110M is a micronized red pigment. It has good opacity, high tinting strength between 97 and 103%, good light fastness, strong absorption of UV light and fine dispersing. It is widely used as colorant for paints, inks and coatings. It may be used for full shaded products, or reduced by tinting with titanium dioxide (TiO2). 收起
Kimpigment® Micronized Iron Oxide Red 130M Kimix Chemical Co., Ltd. Kimpigment® Micronized Iron Oxide Red 130M is a micronized red pigment. It has good opacity, high tinting strength between 97 and 103%, good light fastness, strong absorption of UV light and fine dispersing. It is widely used as colorant for paints, inks ...展開 Kimpigment® Micronized Iron Oxide Red 130M is a micronized red pigment. It has good opacity, high tinting strength between 97 and 103%, good light fastness, strong absorption of UV light and fine dispersing. It is widely used as colorant for paints, inks and coatings. It may be used for full shaded products, or reduced by tinting with titanium dioxide (TiO2). 收起
Kimpigment® Micronized Iron Oxide Yellow 910M Kimix Chemical Co., Ltd. Kimpigment® Micronized Iron Oxide Yellow 910M is a micronized yellow pigment. It has good opacity, high tinting strength between 97 and 103%, good light fastness, strong absorption of UV light and fine dispersing. It is widely used as colorant for paints,...展開 Kimpigment® Micronized Iron Oxide Yellow 910M is a micronized yellow pigment. It has good opacity, high tinting strength between 97 and 103%, good light fastness, strong absorption of UV light and fine dispersing. It is widely used as colorant for paints, inks and coatings. It may be used for full shaded products, or reduced by tinting with titanium dioxide (TiO2). 收起
Kimpigment® Micronized Iron Oxide Yellow 920M Kimix Chemical Co., Ltd. Kimpigment® Micronized Iron Oxide Yellow 920M is a micronized yellow pigment. It has good opacity, high tinting strength between 97 and 103%, good light fastness, strong absorption of UV light and fine dispersing. It is widely used as colorant for paints,...展開 Kimpigment® Micronized Iron Oxide Yellow 920M is a micronized yellow pigment. It has good opacity, high tinting strength between 97 and 103%, good light fastness, strong absorption of UV light and fine dispersing. It is widely used as colorant for paints, inks and coatings. It may be used for full shaded products, or reduced by tinting with titanium dioxide (TiO2). 收起
Kimpigment® R92 Kimix Chemical Co., Ltd. Kimpigment® R92 is a rutile titanium dioxide pigment, surface treated with silicon and aluminium. It has good whiteness, tint reducing power, high gloss and good weather stability. It can be used in paints, coatings, inks and powder coatings.
Kimpigment® R93 Kimix Chemical Co., Ltd. Kimpigment® R93 is a rutile titanium dioxide pigment, surface treated with zirconium and aluminium. It has good whiteness, tint reducing power, high gloss and good weather stability. It can be used in paints, coatings, inks and powder coatings.
Kimpigment® R93H Kimix Chemical Co., Ltd. Kimpigment® R93H is a rutile titanium dioxide pigment, surface treated with zirconium and aluminium. It has good whiteness, tint reducing power, high gloss and good weather stability. It can be used in paints, coatings, inks and powder coatings.
Kimresin® KSP 100 Kimix Chemical Co., Ltd. Kimresin® KSP 100 is an aromatic petroleum C9 resin suitable for use in paints, printing inks, coatings and adhesives. It provides added stability against acids and alkalis, enhances chemical stability and heat resistance. It can also act as a tackifier, ...展開 Kimresin® KSP 100 is an aromatic petroleum C9 resin suitable for use in paints, printing inks, coatings and adhesives. It provides added stability against acids and alkalis, enhances chemical stability and heat resistance. It can also act as a tackifier, softener and strengthening agent. 收起
Kimresin® KSP 100A Kimix Chemical Co., Ltd. Kimresin® KSP 100A is an aromatic petroleum C9 resin suitable for use in paints, printing inks, coatings and adhesives. It provides added stability against acids and alkalis, enhances chemical stability and heat resistance. It is especially suited for adh...展開 Kimresin® KSP 100A is an aromatic petroleum C9 resin suitable for use in paints, printing inks, coatings and adhesives. It provides added stability against acids and alkalis, enhances chemical stability and heat resistance. It is especially suited for adhesives, adding malleability anbd flexibility. 收起
Kimresin® KSP 110 Kimix Chemical Co., Ltd. Kimresin® KSP 110 is an aromatic petroleum C9 resin suitable for use in paints, printing inks, coatings and adhesives. It provides added stability against acids and alkalais, enhances chemical stability and heat resistance. It can also act as a tackifier,...展開 Kimresin® KSP 110 is an aromatic petroleum C9 resin suitable for use in paints, printing inks, coatings and adhesives. It provides added stability against acids and alkalais, enhances chemical stability and heat resistance. It can also act as a tackifier, softener and strengthening agent. 收起
Kimresin® KSP 120 Kimix Chemical Co., Ltd. Kimresin® KSP 120 is an aromatic petroleum C9 resin suitable for use in paints, printing inks, coatings and adhesives. It provides added stability against acids and alkalis, enhances chemical stability and heat resistance. It can also act as a tackifier, ...展開 Kimresin® KSP 120 is an aromatic petroleum C9 resin suitable for use in paints, printing inks, coatings and adhesives. It provides added stability against acids and alkalis, enhances chemical stability and heat resistance. It can also act as a tackifier, softener and strengthening agent. 收起
Kimresin® KSP 120A Kimix Chemical Co., Ltd. Kimresin® KSP 120A is an aromatic petroleum C9 resin suitable for use in paints, printing inks, coatings and adhesives. It provides added stability against acids and alkalis, enhances chemical stability and heat resistance. It is especially suited for adh...展開 Kimresin® KSP 120A is an aromatic petroleum C9 resin suitable for use in paints, printing inks, coatings and adhesives. It provides added stability against acids and alkalis, enhances chemical stability and heat resistance. It is especially suited for adhesives, adding malleability anbd flexibility. 收起
Kimresin® KSP 120P Kimix Chemical Co., Ltd. Kimresin® KSP 120P is an aromatic petroleum C9 resin suitable for use in enamel paints, with good compatibility with long oil alkyd resins. It provides added stability against acids and alkalis, enhances chemical stability and heat resistance. It can also...展開 Kimresin® KSP 120P is an aromatic petroleum C9 resin suitable for use in enamel paints, with good compatibility with long oil alkyd resins. It provides added stability against acids and alkalis, enhances chemical stability and heat resistance. It can also act as a tackifier, softener and strengthening agent. 收起
Kimresin® KSP 130 Kimix Chemical Co., Ltd. Kimresin® KSP 130 is an aromatic petroleum C9 resin suitable for use in paints, printing inks, coatings and adhesives. It provides added stability against acids and alkalis, enhances chemical stability and heat resistance. It can also act as a tackifier, ...展開 Kimresin® KSP 130 is an aromatic petroleum C9 resin suitable for use in paints, printing inks, coatings and adhesives. It provides added stability against acids and alkalis, enhances chemical stability and heat resistance. It can also act as a tackifier, softener and strengthening agent. 收起
Kimresin® KSP 140 Kimix Chemical Co., Ltd. Kimresin® KSP 140 is an aromatic petroleum C9 resin suitable for use in paints, printing inks, coatings and adhesives. It provides added stability against acids and alkalis, enhances chemical stability and heat resistance. It can also act as a tackifier, ...展開 Kimresin® KSP 140 is an aromatic petroleum C9 resin suitable for use in paints, printing inks, coatings and adhesives. It provides added stability against acids and alkalis, enhances chemical stability and heat resistance. It can also act as a tackifier, softener and strengthening agent. 收起
Kimresin® KSP 5100 Kimix Chemical Co., Ltd. Kimresin® KSP 5100 is a C5 petroleum resin with a bromine value of 250 cg/g maximum. It can be used in many applications, such as road marking paint, hot melt adhesives, sealants and printing ink. It enhances the water, UV and chemical resistance while im...展開 Kimresin® KSP 5100 is a C5 petroleum resin with a bromine value of 250 cg/g maximum. It can be used in many applications, such as road marking paint, hot melt adhesives, sealants and printing ink. It enhances the water, UV and chemical resistance while improving the stability, weathering, stain and wear resistance. 收起
Kimresin® KSP 5100A Kimix Chemical Co., Ltd. Kimresin® KSP 5100A is a C5 petroleum resin with a bromine value of 220 cg/g maximum. It can be used in many applications, such as road marking paint, hot melt adhesives, sealants and printing ink. It enhances the water, UV and chemical resistance while i...展開 Kimresin® KSP 5100A is a C5 petroleum resin with a bromine value of 220 cg/g maximum. It can be used in many applications, such as road marking paint, hot melt adhesives, sealants and printing ink. It enhances the water, UV and chemical resistance while improving the stability, weathering, stain and wear resistance. 收起
Methyltriethoxysilane Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silico...展開 Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silicone resins and silicone rubber,silicone resins and silicone rubber. 收起
Methyltrimethoxysilane Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainl...展開 Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainly used as the crosslinking agent of room temperature vulcanized silicone rubber, as well as the glass fiber surface treatment agent and reinforced plastic laminate treatment agent, in order to improve the mechanical strength of products, heat resistance, moisture resistance. 收起
Modified Starch - Compound Active Printing Paste Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological pro...展開 Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起
Modified Starch - High End Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holdi...展開 Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. 收起
Modified Starch - Mid Range Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, ...展開 Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起
ND-22 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 ND-22 is used as cross-linking agent for RTV Silicone Rubber and reinforcing for epoxy fiber glass reinforced plastics, viscosity increaser for synthetic resin and raw stuff fabric racked agent.
Nano Silver Powder TFNP-30 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Nano Silver Powder TFNP-30 is a moderate tap density,high dispersion, spherical nanometer silver powder. TFNP-30 is ideal for low-temperature sintering paste, low silver content and high conductive paste, and touchscreen slurry.
Nano Silver Powder TFNP-80 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Nano Silver Powder TFNP-80 is a moderate tap density, nanoscale spherical monodisperse silver. It is mainly used as an additive material.
PVB Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PV...展開 Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PVB has high transparency, good cold resistance, water resistance, film forming properties and impact resistance, widely used in middle film of glass, ceramic flower paper, metal protective paint, tipping paper, aluminum foil, insulation paint, fiber treatment agent, finished parts, printing inks, dyes and so on. 收起
PVC Paste Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 PVC Paste is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , go...展開 PVC Paste is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , good electrical insulation , thermoplasticity and membrane forming capacity. They are essential materials for preparing PVC compounds. By adding blending agents and employing different techniques, they can be made into rigid or non-rigid PVC products and are suppliable in a wide range of transparent, translucent, and opaque colours. 收起
Precipitated Silica Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixi...展開 Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixing solutions of sodium silicate with sulfuric acid in water. A chemical reaction occurs, and pellets of pure silica form. 收起
Refined Fatty Acid Zouping Tianxing Chemical Industry Co., Ltd. Refined Fatty Acid, in the form of a clear liquid, is a high-quality raw material that can be used in coatings and printing inks. Its iodine value lies between 50 and 60, and it contains between 210 and 225 mg of potassium hydroxide per gram.
Refined Glycerine Zouping Tianxing Chemical Industry Co., Ltd. Refined Glycerine, in the form of a transparent liquid without suspended precipitates, is a raw material that can be used in paints, textiles, printing and dyeing. This product's density is greater than 1.2481 g/ml and it contains no more than 0.05% ash.
SCA-Y25E Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of t...展開 SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. SCA-Y25E can be used in a number of applications. 收起
SCA-Y25M Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion o...展開 SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. It can be used in a number of applications. 收起
SILICONE FLUID ATPN-100 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICON...展開 SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-100 is ideal for use in a wide range of applications. 收起
SILICONE FLUID ATPN-1000 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICO...展開 SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-1000 is ideal for use in a wide range of applications. 收起
Silane ATPN-1100 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to ...展開 Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to substrates. The primary amine function reacts with a wide array of thermoset, thermoplastic, and elastomeric materials. 收起
Silane ATPN-1110 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion an...展開 Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion and wet ability of filler in the high molecular materials. ATPN-1110 is an excellent promoter of adhesion and sealant (such as polyurethane, epoxy, and phenol). In the glass wool and FRP products, it can be added into phenol resins to improve the wet resistance and mechanical performance. 收起
Silane ATPN-1120 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of...展開 Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone-polymers or as crosslinker (moisture crosslinking of polymers). The application as“coupling agent”leads in general to an improvement of mechanical and electrical product properties above all under exposure to heat and/or moisture. 收起
Silane Coupling Agent Si-69 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strengt...展開 Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strength, tearing strength and abrasive resistance and reduce compression set of vulcanizates. In addition, it can reduce the viscosity and improve the processability of rubber products. Si-69 is especially suitable to improve the reinforcing properties of fillers that contain hydroxyl groups in all unsaturated polymers having double bonds or their blends. 收起
UVB2000 Special Tertiary Amine Acrylate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVB2000 Special Tertiary Amine Acrylate is a difunctional amine coinitiator which, when used in conjunction with a photosensitizer such as benzophenone, promotes rapid curing under UV light. Additional benefits include reduced odors, both at press side an...展開 UVB2000 Special Tertiary Amine Acrylate is a difunctional amine coinitiator which, when used in conjunction with a photosensitizer such as benzophenone, promotes rapid curing under UV light. Additional benefits include reduced odors, both at press side and in the cured film, and reduced blooming. It is ideal for use in a wide range of applications. 收起
UVB2200 Reactive Amine Acrylate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVB2200 Reactive Amine Acrylate is a very low viscosity, highly reactive amine modified polyetheracrylate oligomer for use in UV and EB curing systems. UVB2200 can be used as the sole binder or with monomer diluents. It is ideal for use in a wide range of...展開 UVB2200 Reactive Amine Acrylate is a very low viscosity, highly reactive amine modified polyetheracrylate oligomer for use in UV and EB curing systems. UVB2200 can be used as the sole binder or with monomer diluents. It is ideal for use in a wide range of applications. 收起
UVE3216 Modified Epoxy Acrylate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVE3216 Modified Epoxy Acrylate is a high molecular weight, acid modified epoxy acrylate. It blended with 10% tripropylene glycol diacrylate. It allows high gloss, fast cure response, higher flexibility and low shrikage. UVE3216 is ideal for use in a wide...展開 UVE3216 Modified Epoxy Acrylate is a high molecular weight, acid modified epoxy acrylate. It blended with 10% tripropylene glycol diacrylate. It allows high gloss, fast cure response, higher flexibility and low shrikage. UVE3216 is ideal for use in a wide range of applications. 收起
UVU 6451 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVU 6451 is a tetrafunctional aliphatic urethane acrylate oligomer developed for UV/EB-cured coatings and inks. It imparts hardness, very fast cure response, and non-yellowing characteristics to these applications.
UVU6219 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVU6219 is an aliphatic polyester based urethane diacrylate oligomer blended with 20% TPGDA, tripropylene glycol diacrylate. It is a flexible oligomer offering good weatherability, and low skin irritation. UVU6219 is ideal for use in a wide range of appli...展開 UVU6219 is an aliphatic polyester based urethane diacrylate oligomer blended with 20% TPGDA, tripropylene glycol diacrylate. It is a flexible oligomer offering good weatherability, and low skin irritation. UVU6219 is ideal for use in a wide range of applications. 收起
UVU6305 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVU6305 is a trifunctional aliphatic polyester urethane acrylate oligomer developed for use in UV and EB cured inks and coatings. Weatherability, low viscosity, and fast cure are among the key attributes of UVU6305. It is ideal for use in a wide range of ...展開 UVU6305 is a trifunctional aliphatic polyester urethane acrylate oligomer developed for use in UV and EB cured inks and coatings. Weatherability, low viscosity, and fast cure are among the key attributes of UVU6305. It is ideal for use in a wide range of applications. 收起
UVU6609 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVU6609 is a hexafunctional aliphatic urethane acrylate oligomer. It offers low viscosity and good abrasion and heat resistance. UVU6609 is ideal for use in a wide range of applications.
UVU6906 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVU6906 is a multifunctional urethane acrylate oligomer that imparts chemical resistance, fast cure response, weatherability, and abrasion resistance to radiation-cure coatings. It is ideal for use in a wide range of applications.