UL Prospector

成功!

成功保存搜索結果
99.99% Conductive Shining Flake Silver Powder Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展開 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起
99.99% Conductive Silver Powder (Spherical) Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications.
Acetylated Distarch Ddipate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive.
Acetylated Distarch Phosphate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展開 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起
Alkylsulfonic Acid Ester of Phenol Plasticizer Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC.
Bisomer® Amine D700 GEO Specialty Chemicals, Inc. TRIMET Products Group 多功能氨基醇助劑
Bisomer® BZMA GEO Specialty Chemicals, Inc. TRIMET Products Group Bisomer® BZMA (Benzyl Methacrylate) is low viscosity mono-functional monomer suitable for a wide range of applications. It is low viscosity and hydrophobic, and is particularly suitable as a reactive diluent in adhesives, sealants, inks and coatings. This...展開 Bisomer® BZMA (Benzyl Methacrylate) is low viscosity mono-functional monomer suitable for a wide range of applications. It is low viscosity and hydrophobic, and is particularly suitable as a reactive diluent in adhesives, sealants, inks and coatings. This product has a methoxyhydroquinone content of 50 ± 5ppm, an acid number of < 0.02mg KOH/g, and a refractive index @ 20°C of 1.51. It can be used as a co-monomer in PMMA based acrylic formulations to increase the impact resistance, hydrophobicity and structural integrity of resins, composites and coatings. It is also particularly useful as a replacement for styrene in unsaturated polyester and vinyl ester resins used in a wide range of applications including chemical fixings and composites. Due to its high refractive index, Bisomer® BZMA is also suitable for cast lenses, optical fibres, transparent laminates and other applications where clarity is a key requirement. 收起
Bisomer® CHMA GEO Specialty Chemicals, Inc. TRIMET Products Group Bisomer® CHMA is a hydrophobic methacrylate monomer. It is a mono-functional methacrylate, making it ideal for acrylic polymer synthesis. Bisomer® CHMA can be used to improve the hydrophobicity, weathering, physical and chemical resistance of acrylic resi...展開 Bisomer® CHMA is a hydrophobic methacrylate monomer. It is a mono-functional methacrylate, making it ideal for acrylic polymer synthesis. Bisomer® CHMA can be used to improve the hydrophobicity, weathering, physical and chemical resistance of acrylic resins. This product is also a useful reactive diluent in 2K adhesives and coatings. 收起
Bisomer® CL HEMA GEO Specialty Chemicals, Inc. TRIMET Products Group Bisomer® CL HEMA (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogel...展開 Bisomer® CL HEMA (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogels. 收起
Bisomer® HEMA HP GEO Specialty Chemicals, Inc. TRIMET Products Group Bisomer® HEMA HP (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogel...展開 Bisomer® HEMA HP (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogels. 收起
Bisomer® LMA GEO Specialty Chemicals, Inc. TRIMET Products Group 憎水性單官能團甲基丙烯酸酯單體,具有低玻璃化轉變溫度(Tg),具有出色的柔韌性和增塑性
Bisomer® LMA 97SP GEO Specialty Chemicals, Inc. TRIMET Products Group Bisomer® LMA 97SP 是一款疏水,低玻璃態轉化溫度(Tg)的單功能丙烯酸甲酯單體。作為聚合型塑化劑使用時,展現出很好的可塑性。使用Bisomer® LMA 97SP的配方可以減少不同批次產品在粘度、顏料潤濕性、抗化學品性、附著力、硬度、剪切強度、粘性等性能上的差異性。 該產品是合成應用於工業塗料、印刷油墨、壓敏膠等領域的高質量丙烯酸樹脂的核心原料。
Bisomer® PEA 6 GEO Specialty Chemicals, Inc. TRIMET Products Group 特殊聚合物單體。是水溶性的,並提供了一種創新的途徑用於生產傳統和水性UV固化氨基甲酸酯丙烯酸酯齊聚物。作為HEA和HPA的替代物,它無毒、易於處理,列於歐洲現有商業化學品目錄(EINECS)的聚合物分類
Bisomer® PPA 6 GEO Specialty Chemicals, Inc. TRIMET Products Group 為制備UV固化氨基甲酸酯丙烯酸酯齊聚物提供了一種非常規的途徑。它是用於基於氨基甲酸酯丙烯酸酯和乙烯基酯(環氧乙烯基酯)UV體系的出色的低收縮反應性稀釋劑
Cardanol Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...展開 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. 收起
DMPA® Dimethylolpropionic Acid GEO Specialty Chemicals, Inc. TRIMET Products Group 產品技術指導 - 一種獨特和多用途的位阻二醇分子,具羥基和羧基官能性。
DMPA® Polyol HA-0135 GEO Specialty Chemicals, Inc. TRIMET Products Group 是一種DMPA CHDA BDO己二酸聚酯樹脂,98%不揮發組分。它可作為水性體系的酸官能團來源和作為共樹脂改進顏料的潤濕、分散和穩定。
DMPA® Polyol HA-0135LV2 GEO Specialty Chemicals, Inc. TRIMET Products Group DMPA® Polyol HA-0135LV2是一種同時帶酸和羥基官能團的低結晶聚酯多醇。類似DMPA® Polyol HA-0135,該樹脂可消除在聚氨酯乳液生產過程中NMP作為加工溶劑的需球
Dispersion Agent BLK-9918 BELIKE Chemical Co.,Ltd. Dispersion Agent BLK-9918 is a coating additive that is in the form of a yellow or brown liquid. This product is most commonly used as a dispersion agent in water-based paint, inks, and water-based acrylic resins.
Fumed Silica Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....展開 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 收起
Hydroxypropyl Aistarch Phosphate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive.
Intechem-01 Shanghai Intechem Corporation Co., Ltd. Intechem-01 is a yellowish or amber viscous liquid that is a perfluoroalkyl alcohol ether amine salt-type anionic fluorocarbon surfactant. This product is water-soluble, can improve humidity, proliferation, emulsification, penetration, performance, and ca...展開 Intechem-01 is a yellowish or amber viscous liquid that is a perfluoroalkyl alcohol ether amine salt-type anionic fluorocarbon surfactant. This product is water-soluble, can improve humidity, proliferation, emulsification, penetration, performance, and can significantly help lower the interfacial tension in inks, coatings, and adhesives. 收起
Intechem-02 Shanghai Intechem Corporation Co., Ltd. Intechem-02 is a pale yellow liquid that is a perfluoroalkyl betaine ether zwitterionic fluorocarbon surfactant. This product can be dissolved in a variety of solvents, and can improve humidity, spreading, and emulsifying in inks, adhesives, and paints.
Intechem-03L Shanghai Intechem Corporation Co., Ltd. Intechem-03L is a light yellow or amber liquid that is a perfluoroalkyl ether quaternary ammonium salt cationic fluorocarbon surfactant. This product is water-soluble, has good chemical and thermal stability, and is used in inks, coatings, and adhesives.
Intechem-05 Shanghai Intechem Corporation Co., Ltd. Intechem-05 is a colorless transparent liquid that is a type of potassium perfluoroalkyl ether carboxylic acid anionic fluorocarbon surfactant. This product can improve humidity, spreading, and emulsifying in inks, coatings, and adhesives.
Intechem-06 Shanghai Intechem Corporation Co., Ltd. Intechem-06 is a colorless to light yellow viscous liquid that is a novel oxa perfluoroalkyl ether-type nonionic surfactant. This product can improve system performance in inks and coatings.
Intechem-07 Shanghai Intechem Corporation Co., Ltd. Intechem-07 is a pale yellow viscous liquid that is a type of alkyl ether anionic fluorocarbon surfactant. This product greatly reduces surface tension in inks, coatings, and adhesives.
Intechem-08 Shanghai Intechem Corporation Co., Ltd. Intechem-08 is a pale yellow liquid that is a perfluoroalkyl ether amine oxide cationic fluorocarbon surfactant. This product can effectively reduce the surface tension in inks, coatings, and adhesives.
Intechem-09 Shanghai Intechem Corporation Co., Ltd. Intechem-09 is a colorless transparent liquid that is a perfluoroalkyl fluorocarbon ether carboxylate surfactant. This product can effectively reduce the surface tension in inks, coatings, and adhesives.
Methyltriethoxysilane Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silico...展開 Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silicone resins and silicone rubber,silicone resins and silicone rubber. 收起
Methyltrimethoxysilane Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainl...展開 Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainly used as the crosslinking agent of room temperature vulcanized silicone rubber, as well as the glass fiber surface treatment agent and reinforced plastic laminate treatment agent, in order to improve the mechanical strength of products, heat resistance, moisture resistance. 收起
Modified Starch - Compound Active Printing Paste Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological pro...展開 Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起
Modified Starch - High End Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holdi...展開 Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. 收起
Modified Starch - Mid Range Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, ...展開 Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起
ND-22 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 ND-22 is used as cross-linking agent for RTV Silicone Rubber and reinforcing for epoxy fiber glass reinforced plastics, viscosity increaser for synthetic resin and raw stuff fabric racked agent.
Nano Silver Powder TFNP-30 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Nano Silver Powder TFNP-30 is a moderate tap density,high dispersion, spherical nanometer silver powder. TFNP-30 is ideal for low-temperature sintering paste, low silver content and high conductive paste, and touchscreen slurry.
Nano Silver Powder TFNP-80 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Nano Silver Powder TFNP-80 is a moderate tap density, nanoscale spherical monodisperse silver. It is mainly used as an additive material.
PVB Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PV...展開 Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PVB has high transparency, good cold resistance, water resistance, film forming properties and impact resistance, widely used in middle film of glass, ceramic flower paper, metal protective paint, tipping paper, aluminum foil, insulation paint, fiber treatment agent, finished parts, printing inks, dyes and so on. 收起
PVC Paste Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 PVC Paste is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , go...展開 PVC Paste is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , good electrical insulation , thermoplasticity and membrane forming capacity. They are essential materials for preparing PVC compounds. By adding blending agents and employing different techniques, they can be made into rigid or non-rigid PVC products and are suppliable in a wide range of transparent, translucent, and opaque colours. 收起
Precipitated Silica Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixi...展開 Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixing solutions of sodium silicate with sulfuric acid in water. A chemical reaction occurs, and pellets of pure silica form. 收起
Refined Fatty Acid Zouping Tianxing Chemical Industry Co., Ltd. Refined Fatty Acid, in the form of a clear liquid, is a high-quality raw material that can be used in coatings and printing inks. Its iodine value lies between 50 and 60, and it contains between 210 and 225 mg of potassium hydroxide per gram.
Refined Glycerine Zouping Tianxing Chemical Industry Co., Ltd. Refined Glycerine, in the form of a transparent liquid without suspended precipitates, is a raw material that can be used in paints, textiles, printing and dyeing. This product's density is greater than 1.2481 g/ml and it contains no more than 0.05% ash.
SCA-Y25E Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of t...展開 SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. SCA-Y25E can be used in a number of applications. 收起
SCA-Y25M Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion o...展開 SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. It can be used in a number of applications. 收起
SILICONE FLUID ATPN-100 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICON...展開 SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-100 is ideal for use in a wide range of applications. 收起
SILICONE FLUID ATPN-1000 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICO...展開 SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-1000 is ideal for use in a wide range of applications. 收起
Silane ATPN-1100 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to ...展開 Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to substrates. The primary amine function reacts with a wide array of thermoset, thermoplastic, and elastomeric materials. 收起
Silane ATPN-1110 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion an...展開 Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion and wet ability of filler in the high molecular materials. ATPN-1110 is an excellent promoter of adhesion and sealant (such as polyurethane, epoxy, and phenol). In the glass wool and FRP products, it can be added into phenol resins to improve the wet resistance and mechanical performance. 收起
Silane ATPN-1120 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of...展開 Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone-polymers or as crosslinker (moisture crosslinking of polymers). The application as“coupling agent”leads in general to an improvement of mechanical and electrical product properties above all under exposure to heat and/or moisture. 收起
Silane Coupling Agent Si-69 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strengt...展開 Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strength, tearing strength and abrasive resistance and reduce compression set of vulcanizates. In addition, it can reduce the viscosity and improve the processability of rubber products. Si-69 is especially suitable to improve the reinforcing properties of fillers that contain hydroxyl groups in all unsaturated polymers having double bonds or their blends. 收起
TRI-REZ® Polyol 1030-60 Polyester Resin GEO Specialty Chemicals, Inc. TRIMET Products Group Tri-Rez 1030-60是一款非結晶、低黏度飽和線性聚脂多元醇,專門為聚氨酯基涂料、膠粘劑和泡沫配方體系設計。其疏水彈性結構,使其成為配制高固體份水基聚氨酯樹脂的理想多元醇。
TRI-REZ® Polyol 1030-90 Polyester Resin GEO Specialty Chemicals, Inc. TRIMET Products Group Tri-Rez 1030-90 是一款非結晶、低黏度飽和線性聚脂多元醇,專門為聚氨酯基涂料、膠粘劑和泡沫配方體系設計。其疏水彈性結構,使其成為配制高固體份水基聚氨酯樹脂的理想多元醇。
TRI-REZ® Polyol 1220A-300 Polyester Resin GEO Specialty Chemicals, Inc. TRIMET Products Group TRI-REZ® Polyol 1220A-300 is a 100% solids highly branched saturated polyester polyol based on TRIMET® TME (Trimethylolethane). The highly branched structure of TRI-REZ® Polyol 1220A-300 makes it an ideal choice for formulating two component, high solids ...展開 TRI-REZ® Polyol 1220A-300 is a 100% solids highly branched saturated polyester polyol based on TRIMET® TME (Trimethylolethane). The highly branched structure of TRI-REZ® Polyol 1220A-300 makes it an ideal choice for formulating two component, high solids polyurethane coatings and elastomers that require excellent UV and chemical resistance properties. 收起
TRI-REZ® Polyol 1230-60 Polyester Resin GEO Specialty Chemicals, Inc. TRIMET Products Group Tri-Rez 1230-60 是一款非晶狀飽和線性聚脂多元醇,專門為聚氨酯體系涂料、膠粘劑和泡沫設計。其疏水彈性結構使其成為配制高固體份水基聚氨酯樹脂的理想多元醇。
TRI-REZ® Polyol 1230-90 Polyester Resin GEO Specialty Chemicals, Inc. TRIMET Products Group Tri-Rez 1230-90 是一款非低黏度飽和線性聚脂多元醇,專門為聚氨酯體系涂料、膠粘劑和泡沫設計。其疏水彈性結構使其成為配制高固體份水基聚氨酯樹脂的理想多元醇。
UVB2000 Special Tertiary Amine Acrylate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVB2000 Special Tertiary Amine Acrylate is a difunctional amine coinitiator which, when used in conjunction with a photosensitizer such as benzophenone, promotes rapid curing under UV light. Additional benefits include reduced odors, both at press side an...展開 UVB2000 Special Tertiary Amine Acrylate is a difunctional amine coinitiator which, when used in conjunction with a photosensitizer such as benzophenone, promotes rapid curing under UV light. Additional benefits include reduced odors, both at press side and in the cured film, and reduced blooming. It is ideal for use in a wide range of applications. 收起
UVB2200 Reactive Amine Acrylate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVB2200 Reactive Amine Acrylate is a very low viscosity, highly reactive amine modified polyetheracrylate oligomer for use in UV and EB curing systems. UVB2200 can be used as the sole binder or with monomer diluents. It is ideal for use in a wide range of...展開 UVB2200 Reactive Amine Acrylate is a very low viscosity, highly reactive amine modified polyetheracrylate oligomer for use in UV and EB curing systems. UVB2200 can be used as the sole binder or with monomer diluents. It is ideal for use in a wide range of applications. 收起
UVE3216 Modified Epoxy Acrylate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVE3216 Modified Epoxy Acrylate is a high molecular weight, acid modified epoxy acrylate. It blended with 10% tripropylene glycol diacrylate. It allows high gloss, fast cure response, higher flexibility and low shrikage. UVE3216 is ideal for use in a wide...展開 UVE3216 Modified Epoxy Acrylate is a high molecular weight, acid modified epoxy acrylate. It blended with 10% tripropylene glycol diacrylate. It allows high gloss, fast cure response, higher flexibility and low shrikage. UVE3216 is ideal for use in a wide range of applications. 收起
UVU 6451 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVU 6451 is a tetrafunctional aliphatic urethane acrylate oligomer developed for UV/EB-cured coatings and inks. It imparts hardness, very fast cure response, and non-yellowing characteristics to these applications.
UVU6219 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVU6219 is an aliphatic polyester based urethane diacrylate oligomer blended with 20% TPGDA, tripropylene glycol diacrylate. It is a flexible oligomer offering good weatherability, and low skin irritation. UVU6219 is ideal for use in a wide range of appli...展開 UVU6219 is an aliphatic polyester based urethane diacrylate oligomer blended with 20% TPGDA, tripropylene glycol diacrylate. It is a flexible oligomer offering good weatherability, and low skin irritation. UVU6219 is ideal for use in a wide range of applications. 收起
UVU6305 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVU6305 is a trifunctional aliphatic polyester urethane acrylate oligomer developed for use in UV and EB cured inks and coatings. Weatherability, low viscosity, and fast cure are among the key attributes of UVU6305. It is ideal for use in a wide range of ...展開 UVU6305 is a trifunctional aliphatic polyester urethane acrylate oligomer developed for use in UV and EB cured inks and coatings. Weatherability, low viscosity, and fast cure are among the key attributes of UVU6305. It is ideal for use in a wide range of applications. 收起
UVU6609 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVU6609 is a hexafunctional aliphatic urethane acrylate oligomer. It offers low viscosity and good abrasion and heat resistance. UVU6609 is ideal for use in a wide range of applications.
UVU6906 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVU6906 is a multifunctional urethane acrylate oligomer that imparts chemical resistance, fast cure response, weatherability, and abrasion resistance to radiation-cure coatings. It is ideal for use in a wide range of applications.