UL Prospector

成功!

成功保存搜索結果
99.99% Conductive Shining Flake Silver Powder Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展開 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起
99.99% Conductive Silver Powder (Spherical) Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications.
Acetylated Distarch Ddipate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive.
Acetylated Distarch Phosphate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展開 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起
Akuabrid HS 019 T&L Co., Ltd. Polymer Technology Centre Akuabrid HS 019 is a milky, semi-clear, liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product is ideal for use in non-toxic coatings for toys, household supplies, textiles, and plastics.
Akuabrid HS 070 T&L Co., Ltd. Polymer Technology Centre Akuabrid HS 070 is a milky, semi-clear, liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product is ideal for use in non-toxic coatings for toys, household supplies, textiles, and plastics.
Akuarane CRP 3300 T&L Co., Ltd. Polymer Technology Centre Akuarane CRP 3300 is a liquid, waterborne polyurethane dispersion that displays good corrosion, alkali, and hydrolysis resistance. This product is ideal for use in plastic, metal, and textile coating applications.
Akuarane CRP 3500A T&L Co., Ltd. Polymer Technology Centre Akuarane CRP 3500A is a liquid, waterborne polyurethane dispersion that displays good corrosion, alkali, and hydrolysis resistance. This product is ideal for use in plastic, metal, and textile coating applications.
Akuarane CRP 7005B T&L Co., Ltd. Polymer Technology Centre Akuarane CRP 7005B is a liquid, waterborne polyurethane dispersion that displays good corrosion, alkali, and hydrolysis resistance. This product is ideal for use in plastic, metal, and textile coating applications.
Akuarane CRP SR 1310 T&L Co., Ltd. Polymer Technology Centre Akuarane CRP SR 1310 is a liquid, waterborne polyurethane dispersion that displays good corrosion and alkali resistance. This product is ideal for use in fluorine-based PUD (plastic, metal, and textile) coating applications.
Akuarane CRP SR 1330 T&L Co., Ltd. Polymer Technology Centre Akuarane CRP SR 1330 is a liquid, waterborne polyurethane dispersion that displays good corrosion and alkali resistance. This product is ideal for use in fluorine-based PUD (plastic, metal, and textile) coating applications.
Akuarane DTP 1322 T&L Co., Ltd. Polymer Technology Centre Akuarane DTP 1322 is a milky white, liquid, waterborne polyurethane dispersion that displays good adhesion and rubbery feel. This product is ideal for use in textile coatings and adhesives.
Akuarane DTP 1330 T&L Co., Ltd. Polymer Technology Centre Akuarane DTP 1330 is a milky white, liquid, waterborne polyurethane dispersion that displays high clearness and good emulsion and pH stability. It is an advanced version of Akuarane DTP 1322. This product is ideal for use in textile coatings and adhesives...展開 Akuarane DTP 1330 is a milky white, liquid, waterborne polyurethane dispersion that displays high clearness and good emulsion and pH stability. It is an advanced version of Akuarane DTP 1322. This product is ideal for use in textile coatings and adhesives. 收起
Alkylsulfonic Acid Ester of Phenol Plasticizer Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC.
Cardanol Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...展開 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. 收起
Ekosol ES 1000 T&L Co., Ltd. Polymer Technology Centre Ekosol ES 1000 is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring hard feel, good non-tack properties, and excellent storage stability. This product is ideal for use in base coats for offset printing inks and synth...展開 Ekosol ES 1000 is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring hard feel, good non-tack properties, and excellent storage stability. This product is ideal for use in base coats for offset printing inks and synthetic leather coatings. 收起
Ekosol ES 1500T T&L Co., Ltd. Polymer Technology Centre Ekosol ES 1500T is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring soft feel and high transparency. This product is ideal for use in direct screen printing ink applications.
Ekosol ES 2500 T&L Co., Ltd. Polymer Technology Centre Ekosol ES 2500 is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring dry and slippery feel, compatibility with transfer release paper, and reduced tack. This product is ideal for use in heat transfer printing applicat...展開 Ekosol ES 2500 is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring dry and slippery feel, compatibility with transfer release paper, and reduced tack. This product is ideal for use in heat transfer printing applications. 收起
Ekosol ES 2600 T&L Co., Ltd. Polymer Technology Centre Ekosol ES 2600 is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring soft feel, excellent elongation, and compatibility with transfer release paper. This product is ideal for use in heat transfer printing applications...展開 Ekosol ES 2600 is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring soft feel, excellent elongation, and compatibility with transfer release paper. This product is ideal for use in heat transfer printing applications. 收起
Ekosol ES 3450A T&L Co., Ltd. Polymer Technology Centre Ekosol ES 3450A is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring soft feel and good adhesion to various substrates. This product is ideal for use as an adhesive in heat transfer printing, hot-peel transfer printi...展開 Ekosol ES 3450A is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring soft feel and good adhesion to various substrates. This product is ideal for use as an adhesive in heat transfer printing, hot-peel transfer printing, and hot foil stamping applications. 收起
Ekosol ES 5300W T&L Co., Ltd. Polymer Technology Centre Ekosol ES 5300W is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - in the form of an adhesive ink containing white pigment. Benefits include shorter processing times and no need for an extra adhesive. This product is ideal f...展開 Ekosol ES 5300W is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - in the form of an adhesive ink containing white pigment. Benefits include shorter processing times and no need for an extra adhesive. This product is ideal for use in hot-peel transfer printing and digitally printed white backing applications. 收起
FT Wax TD106 Nanjing Tianshi New Material Technologies Co., Ltd FT Wax TD106 is a standard Fischer-Tropsch (FT) synthetic wax featuring a high melting point, high hardness, and low viscosity. This product is suitable for use in hot melt glue, printing ink, automotive coating, and shoe polish applications.
FT Wax TD94 Nanjing Tianshi New Material Technologies Co., Ltd FT Wax TD94 is a standard Fischer-Tropsch (FT) synthetic wax featuring high stability, a high melting point, high hardness, and low viscosity. This product is suitable for use in hot melt glue, printing ink, automotive coating, and shoe polish application...展開 FT Wax TD94 is a standard Fischer-Tropsch (FT) synthetic wax featuring high stability, a high melting point, high hardness, and low viscosity. This product is suitable for use in hot melt glue, printing ink, automotive coating, and shoe polish applications. 收起
FT Wax TX100 Nanjing Tianshi New Material Technologies Co., Ltd FT Wax TX100 is a refined Fischer-Tropsch (FT) synthetic wax featuring low oil content, a high melting point, high hardness, and low viscosity. This product is suitable for use in hot melt glue, printing ink, automotive coating, and shoe polish applicatio...展開 FT Wax TX100 is a refined Fischer-Tropsch (FT) synthetic wax featuring low oil content, a high melting point, high hardness, and low viscosity. This product is suitable for use in hot melt glue, printing ink, automotive coating, and shoe polish applications. 收起
FT Wax TX112 Nanjing Tianshi New Material Technologies Co., Ltd FT Wax TX112 is a refined Fischer-Tropsch (FT) synthetic wax featuring a high melting point, high hardness, and low viscosity. This product is suitable for use in hot melt glue, printing ink, automotive coating, and shoe polish applications.
Fumed Silica Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....展開 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 收起
Hydroxypropyl Aistarch Phosphate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive.
Methyltriethoxysilane Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silico...展開 Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silicone resins and silicone rubber,silicone resins and silicone rubber. 收起
Methyltrimethoxysilane Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainl...展開 Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainly used as the crosslinking agent of room temperature vulcanized silicone rubber, as well as the glass fiber surface treatment agent and reinforced plastic laminate treatment agent, in order to improve the mechanical strength of products, heat resistance, moisture resistance. 收起
Modified Starch - Compound Active Printing Paste Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological pro...展開 Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起
Modified Starch - High End Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holdi...展開 Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. 收起
Modified Starch - Mid Range Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, ...展開 Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起
ND-22 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 ND-22 is used as cross-linking agent for RTV Silicone Rubber and reinforcing for epoxy fiber glass reinforced plastics, viscosity increaser for synthetic resin and raw stuff fabric racked agent.
NEW-0401 Nanjing Tianshi New Material Technologies Co., Ltd NEW-0401 is a fine white micronized amide wax powder with a high melting point. This product can be used in coating and ink systems to improve polishing resistance and to provide good air permeability and adhesion resistance, as well as a distinct matting...展開 NEW-0401 is a fine white micronized amide wax powder with a high melting point. This product can be used in coating and ink systems to improve polishing resistance and to provide good air permeability and adhesion resistance, as well as a distinct matting effect. It can also be used as degassing agent, either alone or together with HAA and benzoin curing systems to reduce the yellowing appearance of the benzoin. 收起
NEW-0402 Nanjing Tianshi New Material Technologies Co., Ltd NEW-0402 is a white micronized amide wax powder which provides excellent degassing, abrasion resistance, and smoothness properties. This product can be used in powder coatings as well as water-based and solvent-based paints and inks.
Nano Silver Powder TFNP-30 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Nano Silver Powder TFNP-30 is a moderate tap density,high dispersion, spherical nanometer silver powder. TFNP-30 is ideal for low-temperature sintering paste, low silver content and high conductive paste, and touchscreen slurry.
Nano Silver Powder TFNP-80 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Nano Silver Powder TFNP-80 is a moderate tap density, nanoscale spherical monodisperse silver. It is mainly used as an additive material.
OE-6101 Nanjing Tianshi New Material Technologies Co., Ltd OE-6101 is a light yellowish emulsion of oxidized high-density polyethylene (HDPE) wax, optimized for use in high temperature conditions. It features high transparency & gloss and increased abrasion & scratch resistance. This product is suitable for use i...展開 OE-6101 is a light yellowish emulsion of oxidized high-density polyethylene (HDPE) wax, optimized for use in high temperature conditions. It features high transparency & gloss and increased abrasion & scratch resistance. This product is suitable for use in inks, shoe polish, and floor, leather, furniture, automotive, paper, and metal coatings. 收起
OE-6102 Nanjing Tianshi New Material Technologies Co., Ltd OE-6102 is a creamy white emulsion of oxidized high-density polyethylene (HDPE) wax, optimized for use in high temperature conditions. It features high gloss and outstanding abrasion resistance. This product is suitable for use in inks, shoe polish, and f...展開 OE-6102 is a creamy white emulsion of oxidized high-density polyethylene (HDPE) wax, optimized for use in high temperature conditions. It features high gloss and outstanding abrasion resistance. This product is suitable for use in inks, shoe polish, and floor, leather, furniture, automotive, paper, and metal coatings. 收起
PEW-0200 Nanjing Tianshi New Material Technologies Co., Ltd PEW-0200 is a white micronized polyethylene (PE) wax powder featuring uniform particle size, easy dispersion, good gloss control, reduced friction, and increased hardness & abrasion resistance. This product is suitable for use in surface coatings, offset ...展開 PEW-0200 is a white micronized polyethylene (PE) wax powder featuring uniform particle size, easy dispersion, good gloss control, reduced friction, and increased hardness & abrasion resistance. This product is suitable for use in surface coatings, offset inks, plastic paints, coil coatings, powder coatings, and flexo & gravure inks. 收起
PEW-0205B Nanjing Tianshi New Material Technologies Co., Ltd PEW-0205B is a white micronized polyethylene (PE) wax powder featuring increased abrasion & scratch resistance and reduced friction. This product is suitable for use in flexo & gravure printing inks, plastic coatings, offset inks, coil coatings, and powde...展開 PEW-0205B is a white micronized polyethylene (PE) wax powder featuring increased abrasion & scratch resistance and reduced friction. This product is suitable for use in flexo & gravure printing inks, plastic coatings, offset inks, coil coatings, and powder coatings. 收起
PEW-0235 Nanjing Tianshi New Material Technologies Co., Ltd PEW-0235 is a white micronized polyethylene (PE) wax powder featuring uniform particle size, easy dispersion, good transparency & anti-fingerprint performance, and excellent slip, abrasion resistance, and matting properties. This product is suitable for u...展開 PEW-0235 is a white micronized polyethylene (PE) wax powder featuring uniform particle size, easy dispersion, good transparency & anti-fingerprint performance, and excellent slip, abrasion resistance, and matting properties. This product is suitable for use in wood coatings, powder coatings, and various solvent-based coatings & printing inks. 收起
PEW-0251 Nanjing Tianshi New Material Technologies Co., Ltd PEW-0251 is a fine white micronized polyethylene (PE) wax powder featuring high hardness, good particle shape, and concentrated particle size. It provides improved smoothness and anti-scratch, anti-abrasion, and anti-adhesive properties. This product is s...展開 PEW-0251 is a fine white micronized polyethylene (PE) wax powder featuring high hardness, good particle shape, and concentrated particle size. It provides improved smoothness and anti-scratch, anti-abrasion, and anti-adhesive properties. This product is suitable for use in wood coatings, industrial paints, and reverse, surface, silk-screen, letterpress, and gravure printing applications. 收起
PEW-0274 Nanjing Tianshi New Material Technologies Co., Ltd PEW-0274 is a white micronized polyethylene (PE) wax powder featuring uniform particle size, high gloss, easy dispersion, greatly improved abrasion resistance, reduced friction, and good transparency. This product is suitable for use in offset, flexo, & g...展開 PEW-0274 is a white micronized polyethylene (PE) wax powder featuring uniform particle size, high gloss, easy dispersion, greatly improved abrasion resistance, reduced friction, and good transparency. This product is suitable for use in offset, flexo, & gravure printing inks, wood coatings, plastic paints, and coil coatings. 收起
PEW-0322 Nanjing Tianshi New Material Technologies Co., Ltd PEW-0322 is a white polyethylene (PE) wax powder featuring good lubricity & hardening properties, low viscosity & adhesion, and excellent abrasion & scratch resistance. This product is suitable for use in powder coatings, offset & gravure printing inks, h...展開 PEW-0322 is a white polyethylene (PE) wax powder featuring good lubricity & hardening properties, low viscosity & adhesion, and excellent abrasion & scratch resistance. This product is suitable for use in powder coatings, offset & gravure printing inks, hot melt adhesives, and road marking paints. 收起
PEW-0361 Nanjing Tianshi New Material Technologies Co., Ltd PEW-0361 is a polyethylene (PE) wax, in the form of white granules, featuring good lubricity, moderate viscosity, and good thermal stability, hardening effects, and abrasion & scratch resistance. This product is suitable for use in powder coatings, offset...展開 PEW-0361 is a polyethylene (PE) wax, in the form of white granules, featuring good lubricity, moderate viscosity, and good thermal stability, hardening effects, and abrasion & scratch resistance. This product is suitable for use in powder coatings, offset & gravure printing inks, hot melt adhesives, and road marking paints. 收起
PEW-0511 Nanjing Tianshi New Material Technologies Co., Ltd PEW-0511 is a light yellow micronized polyethylene (PE) wax powder which provides excellent abrasion and adhesion resistance as well as good gloss, transparency, smoothness, and hardness properties. This product is suitable for use in water-based and solv...展開 PEW-0511 is a light yellow micronized polyethylene (PE) wax powder which provides excellent abrasion and adhesion resistance as well as good gloss, transparency, smoothness, and hardness properties. This product is suitable for use in water-based and solvent-based ink and coating applications. 收起
PEW-0601 Nanjing Tianshi New Material Technologies Co., Ltd PEW-0601 is a fine white powder composed of micronized PTFE-modified polyethylene wax. It features high hardness, good particle shape, and a narrow particle size range. It also provides good anti-sludging, anti-sinking, anti-sticking, scratch & abrasion r...展開 PEW-0601 is a fine white powder composed of micronized PTFE-modified polyethylene wax. It features high hardness, good particle shape, and a narrow particle size range. It also provides good anti-sludging, anti-sinking, anti-sticking, scratch & abrasion resistance, and sealing characteristics. This product is suitable for use in solvent-based coatings and printing inks. 收起
PEW-0602F Nanjing Tianshi New Material Technologies Co., Ltd PEW-0602F is a white powder composed of micronized PTFE-modified polyethylene wax. It features uniform particle size & shape, easy dispersion, and very high hardness. It also provides improved slip, scratch & abrasion resistance, and anti-sludging & anti-...展開 PEW-0602F is a white powder composed of micronized PTFE-modified polyethylene wax. It features uniform particle size & shape, easy dispersion, and very high hardness. It also provides improved slip, scratch & abrasion resistance, and anti-sludging & anti-blocking properties. This product is suitable for use in flexo, gravure, & offset printing inks, wood & plastic coatings, and industrial paint applications. 收起
PEW-0655F Nanjing Tianshi New Material Technologies Co., Ltd PEW-0655F is a white powder composed of micronized PTFE-modified polyethylene wax. It features high hardness, good grain shape, and a narrow particle size range. It also provides improved smoothness, easy dispersion, and excellent scratch & abrasion resis...展開 PEW-0655F is a white powder composed of micronized PTFE-modified polyethylene wax. It features high hardness, good grain shape, and a narrow particle size range. It also provides improved smoothness, easy dispersion, and excellent scratch & abrasion resistance. This product is suitable for use in printing inks, epoxy resin systems, and wood, plastic, and industrial coatings. 收起
PEW-0674F Nanjing Tianshi New Material Technologies Co., Ltd PEW-0674F is a white powder composed of micronized PTFE-modified polyethylene wax. It features high hardness, uniform particle size & shape, and low molecular weight. It also provides excellent scratch & abrasion resistance, easy dispersion, outstanding s...展開 PEW-0674F is a white powder composed of micronized PTFE-modified polyethylene wax. It features high hardness, uniform particle size & shape, and low molecular weight. It also provides excellent scratch & abrasion resistance, easy dispersion, outstanding smoothness, and very good transparency. This product is suitable for use in wood, can, & coil coatings, gravure & offset printing inks, and epoxy systems. 收起
PEW-0851 Nanjing Tianshi New Material Technologies Co., Ltd PEW-0851 is a light yellow micronized polyethylene (PE) wax powder with high hardness and a high melting point. It provides excellent dispersibility, good gloss, hardness, & anti-adhesive properties, and excellent scratch, abrasion, & wear resistance. Thi...展開 PEW-0851 is a light yellow micronized polyethylene (PE) wax powder with high hardness and a high melting point. It provides excellent dispersibility, good gloss, hardness, & anti-adhesive properties, and excellent scratch, abrasion, & wear resistance. This product is suitable for use in water-based & solvent-based printing inks, coatings, and paints. 收起
PEW-2001 Nanjing Tianshi New Material Technologies Co., Ltd PEW-2001 is a white liquid dispersion of oxidized polyethylene (PE) wax which provides excellent abrasion & scratch resistance, matting properties, dirt resistance, and smooth texture. This product is suitable for use in various water-based ink and coatin...展開 PEW-2001 is a white liquid dispersion of oxidized polyethylene (PE) wax which provides excellent abrasion & scratch resistance, matting properties, dirt resistance, and smooth texture. This product is suitable for use in various water-based ink and coating applications. 收起
PEWO-0500-15 Nanjing Tianshi New Material Technologies Co., Ltd PEWO-0500-15 is a non-toxic and non-corrosive oxidized polyethylene (PE) wax, in the form of yellow granules. It features a high softening point, low viscosity, good chemical stability, and increased strength & surface gloss. This product is suitable for ...展開 PEWO-0500-15 is a non-toxic and non-corrosive oxidized polyethylene (PE) wax, in the form of yellow granules. It features a high softening point, low viscosity, good chemical stability, and increased strength & surface gloss. This product is suitable for use in hot melt adhesive, textile finishing, and cardboard & paper coating applications. 收起
PEWO-0530 Nanjing Tianshi New Material Technologies Co., Ltd PEWO-0530 is a non-toxic and non-corrosive oxidized polyethylene (PE) wax, in the form of yellow granules. It features a high softening point, low viscosity, and good chemical stability. This product is suitable for use in hot melt adhesive, textile finis...展開 PEWO-0530 is a non-toxic and non-corrosive oxidized polyethylene (PE) wax, in the form of yellow granules. It features a high softening point, low viscosity, and good chemical stability. This product is suitable for use in hot melt adhesive, textile finishing, and cardboard & paper coating applications. 收起
PPW-0901 Nanjing Tianshi New Material Technologies Co., Ltd PPW-0901 is a white micronized polypropylene (PP) wax powder with uniform particle size & shape, good transparency, a high melting point, high hardness, and easy dispersion. It helps improve scratch resistance and high temperature blocking resistance. Thi...展開 PPW-0901 is a white micronized polypropylene (PP) wax powder with uniform particle size & shape, good transparency, a high melting point, high hardness, and easy dispersion. It helps improve scratch resistance and high temperature blocking resistance. This product is ideal for use in UV coatings, powder coatings, and solvent-based inks & coatings. 收起
PPW-0922 Nanjing Tianshi New Material Technologies Co., Ltd PPW-0922 is a white micronized polypropylene (PP) wax powder with uniform particle size & shape, a high melting point, and high hardness. It helps improve scratch resistance and high temperature blocking resistance. This product is ideal for use in powder...展開 PPW-0922 is a white micronized polypropylene (PP) wax powder with uniform particle size & shape, a high melting point, and high hardness. It helps improve scratch resistance and high temperature blocking resistance. This product is ideal for use in powder coatings and solvent-based coatings and printing inks. 收起
PPW-0931 Nanjing Tianshi New Material Technologies Co., Ltd PPW-0931 is a white micronized polypropylene (PP) wax powder with uniform particle size & shape, a high melting point, good transparency, and easy dispersion. It helps improve scratch resistance and high temperature blocking resistance. This product is id...展開 PPW-0931 is a white micronized polypropylene (PP) wax powder with uniform particle size & shape, a high melting point, good transparency, and easy dispersion. It helps improve scratch resistance and high temperature blocking resistance. This product is ideal for use in printing inks and wood surface, solvent-based, powder, UV, and floor coatings. 收起
PPW-0936 Nanjing Tianshi New Material Technologies Co., Ltd PPW-0936 is a white micronized polypropylene (PP) wax powder with a high melting point and high hardness. It helps improve scratch resistance and high temperature blocking resistance. This product is ideal for use in water-based and solvent-based inks and...展開 PPW-0936 is a white micronized polypropylene (PP) wax powder with a high melting point and high hardness. It helps improve scratch resistance and high temperature blocking resistance. This product is ideal for use in water-based and solvent-based inks and coatings. 收起
PTFE-0104 Nanjing Tianshi New Material Technologies Co., Ltd PTFE-0104 is a white micronized PTFE wax powder featuring good heat resistance and lubricity. It can be used in coating applications, where it contributes to a very low coefficient of friction and performs as an abrasion and scratch resisting additive. It...展開 PTFE-0104 is a white micronized PTFE wax powder featuring good heat resistance and lubricity. It can be used in coating applications, where it contributes to a very low coefficient of friction and performs as an abrasion and scratch resisting additive. It also contributes abrasion and corrosion resistance in paints. Additionally, in paints and printing inks, it improves smoothness and slip. 收起
PTFE-1003 Nanjing Tianshi New Material Technologies Co., Ltd PTFE-1003 is a white liquid dispersion of PTFE wax which features excellent scratch & abrasion resistance, high smoothness, and high temperature resistance. This product is suitable for use in powder coating, water-based coating, and printing ink applicat...展開 PTFE-1003 is a white liquid dispersion of PTFE wax which features excellent scratch & abrasion resistance, high smoothness, and high temperature resistance. This product is suitable for use in powder coating, water-based coating, and printing ink applications. 收起
PVB Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PV...展開 Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PVB has high transparency, good cold resistance, water resistance, film forming properties and impact resistance, widely used in middle film of glass, ceramic flower paper, metal protective paint, tipping paper, aluminum foil, insulation paint, fiber treatment agent, finished parts, printing inks, dyes and so on. 收起
PVC Paste Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 PVC Paste is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , go...展開 PVC Paste is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , good electrical insulation , thermoplasticity and membrane forming capacity. They are essential materials for preparing PVC compounds. By adding blending agents and employing different techniques, they can be made into rigid or non-rigid PVC products and are suppliable in a wide range of transparent, translucent, and opaque colours. 收起
Polurene FP75 S.A.P.I.C.I. SpA Polurene FP75 is a polyurethane adduct with low free TDI content. This product meets EU, BFR, and FDA standards for food packaging. It can be used in 2K adhesives and inks. Polurene FP75 contains less than .5% TDI isocyanates.
Polurene IR 51 AE S.A.P.I.C.I. SpA Polurene IR 51 AE is an isocyanurate with low free TDI content. This product dries quickly with limited yellowing. It can be used in polyurethane sealers, matt topcoats, adhesives, and inks. This product contains less than .3% TDI isocyanates.
Polurene IR 51 K S.A.P.I.C.I. SpA Polurene IR 51 K is an aromatic isocyanurate based on toluenediisocyanate. This product cures quickly, with limited yellowing, good elasticity, and felxibility. It can be used in combination with any Rexin K saturated polyester in order to product prime...展開 Polurene IR 51 K is an aromatic isocyanurate based on toluenediisocyanate. This product cures quickly, with limited yellowing, good elasticity, and felxibility. It can be used in combination with any Rexin K saturated polyester in order to product primer or overprint varnishes. 收起
Polurene OK K S.A.P.I.C.I. SpA Polurene OK K is an aliphatic-aromatic isocyanurate. This product dries quickly. If used in combination with saturated polyesters, it can be used in the formulation of overprinting coatings and for inks with good non-yellowing properties.
Polurene OK.D AE S.A.P.I.C.I. SpA Polurene OK.D AE is an aliphatic-aromatic isocyanurate. This product is compatible with nitrocellulose. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics and other...展開 Polurene OK.D AE is an aliphatic-aromatic isocyanurate. This product is compatible with nitrocellulose. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics and other substrates. Finally, it can be used in polyurethane adhesives and inks. This product contains less than .5% TDI or HDI isocyanates. 收起
Polurene T 70 AE S.A.P.I.C.I. SpA Polurene T 70 AE is an aliphatic polyisocyanate. When diluted, this product can be used to improve the performance of short or long oil drying resins. It can be used in 2K laminating adhesives and inks. It can also be used in 2K polyurethane coatings w...展開 Polurene T 70 AE is an aliphatic polyisocyanate. When diluted, this product can be used to improve the performance of short or long oil drying resins. It can be used in 2K laminating adhesives and inks. It can also be used in 2K polyurethane coatings with good chemical and weather resistance. This product contains less than .5% IPDI isocyanates. 收起
Polurgreen FP75-01 S.A.P.I.C.I. SpA Polurgreen FP75-01 is a polyurethane adduct. This product contains less than .1% TDI isocyanates. It may be used in 2K adhesives and inks. Polurgreen FP75-01 is in accord with EU, BFR, and FDA regulations for food packaging.
Precipitated Silica Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixi...展開 Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixing solutions of sodium silicate with sulfuric acid in water. A chemical reaction occurs, and pellets of pure silica form. 收起
Refined Fatty Acid Zouping Tianxing Chemical Industry Co., Ltd. Refined Fatty Acid, in the form of a clear liquid, is a high-quality raw material that can be used in coatings and printing inks. Its iodine value lies between 50 and 60, and it contains between 210 and 225 mg of potassium hydroxide per gram.
Refined Glycerine Zouping Tianxing Chemical Industry Co., Ltd. Refined Glycerine, in the form of a transparent liquid without suspended precipitates, is a raw material that can be used in paints, textiles, printing and dyeing. This product's density is greater than 1.2481 g/ml and it contains no more than 0.05% ash.
Rexin K 1939 S.A.P.I.C.I. SpA Rexin K 1939 is a solvent-based hydroxy-terminated saturated polyester resin. When used in the formulation of inks, this product's end result is light, clear, not sticky and highly resistant to aging, chemical agents, and heat. It can be used in the for...展開 Rexin K 1939 is a solvent-based hydroxy-terminated saturated polyester resin. When used in the formulation of inks, this product's end result is light, clear, not sticky and highly resistant to aging, chemical agents, and heat. It can be used in the formulation of 2K polyurethane overprinting lacquers and inks. 收起
Rexin K 411 S.A.P.I.C.I. SpA Rexin K 411 is a branched saturated polyester. This product has high chemical resistance, abrasion resistance, and surface hardness. It is compatible with nitrocellulose, urea, and melamine resins. This product can be used in high-performance inks for ...展開 Rexin K 411 is a branched saturated polyester. This product has high chemical resistance, abrasion resistance, and surface hardness. It is compatible with nitrocellulose, urea, and melamine resins. This product can be used in high-performance inks for prolonged and continuous use. 收起
Rexin K 6258 S.A.P.I.C.I. SpA Rexin K 6258 is a branched saturated polyester resin that is soluble in ethyl acetate. This product is compatible with nitrocellulose, urea and melamine resins. It can be used in the formulation of inks and overprint varnishes.
Rexin K 6302 S.A.P.I.C.I. SpA Rexin K 6302 is a polyester resin. This product is soluble in ethyl acetate. It can be used in the formulation of inks and overprint varnishes.
SCA-Y25E Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of t...展開 SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. SCA-Y25E can be used in a number of applications. 收起
SCA-Y25M Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion o...展開 SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. It can be used in a number of applications. 收起
SILICONE FLUID ATPN-100 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICON...展開 SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-100 is ideal for use in a wide range of applications. 收起
SILICONE FLUID ATPN-1000 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICO...展開 SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-1000 is ideal for use in a wide range of applications. 收起
Silane ATPN-1100 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to ...展開 Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to substrates. The primary amine function reacts with a wide array of thermoset, thermoplastic, and elastomeric materials. 收起
Silane ATPN-1110 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion an...展開 Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion and wet ability of filler in the high molecular materials. ATPN-1110 is an excellent promoter of adhesion and sealant (such as polyurethane, epoxy, and phenol). In the glass wool and FRP products, it can be added into phenol resins to improve the wet resistance and mechanical performance. 收起
Silane ATPN-1120 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of...展開 Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone-polymers or as crosslinker (moisture crosslinking of polymers). The application as“coupling agent”leads in general to an improvement of mechanical and electrical product properties above all under exposure to heat and/or moisture. 收起
Silane Coupling Agent Si-69 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strengt...展開 Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strength, tearing strength and abrasive resistance and reduce compression set of vulcanizates. In addition, it can reduce the viscosity and improve the processability of rubber products. Si-69 is especially suitable to improve the reinforcing properties of fillers that contain hydroxyl groups in all unsaturated polymers having double bonds or their blends. 收起
Twax-1411 Nanjing Tianshi New Material Technologies Co., Ltd Twax-1411 is a superfine white micronized wax powder which displays good transparency, gloss, and feel characteristics. This product is suitable for use in leather coatings, printing inks, and pyrographic art applications.
Twax-1502 Nanjing Tianshi New Material Technologies Co., Ltd Twax-1502 is a light yellow powder composed of micronized montan wax. It features uniform particle size, easy dispersion, good wettability & matting effects, and improved scratch resistance & smoothness. This product is suitable for use in powder coatings...展開 Twax-1502 is a light yellow powder composed of micronized montan wax. It features uniform particle size, easy dispersion, good wettability & matting effects, and improved scratch resistance & smoothness. This product is suitable for use in powder coatings, solvent-based coatings & printing inks, and engineering plastic applications. 收起
Twax-1601 Nanjing Tianshi New Material Technologies Co., Ltd Twax-1601 is a light yellow powder composed of micronized pure carnauba wax. It features uniform particle size, easy dispersion, improved slip & scratch resistance, and good gloss & transparency. This product is suitable for use in solvent-based, flexo, &...展開 Twax-1601 is a light yellow powder composed of micronized pure carnauba wax. It features uniform particle size, easy dispersion, improved slip & scratch resistance, and good gloss & transparency. This product is suitable for use in solvent-based, flexo, & gravure printing inks, powder coatings, UV coatings, and leather finishing & polishing applications. 收起
Twax-2101 Nanjing Tianshi New Material Technologies Co., Ltd Twax-2101 is a white liquid wax dispersion with a high melting point, easy dispersion, and good suspension characteristics. It functions as a softening agent and matting agent, and offers good anti-adhesion properties. This product is suitable for use in ...展開 Twax-2101 is a white liquid wax dispersion with a high melting point, easy dispersion, and good suspension characteristics. It functions as a softening agent and matting agent, and offers good anti-adhesion properties. This product is suitable for use in water-based adhesives and textile & leather coatings. 收起
Twax-966 Nanjing Tianshi New Material Technologies Co., Ltd Twax-966 is a white micronized PTFE wax powder with very uniform particle size, easy dispersion, high hardness, and excellent scratch & abrasion resistance. This product is suitable for use in can coating, wood coating, paint, printing ink, leather coatin...展開 Twax-966 is a white micronized PTFE wax powder with very uniform particle size, easy dispersion, high hardness, and excellent scratch & abrasion resistance. This product is suitable for use in can coating, wood coating, paint, printing ink, leather coating, and powder coating applications. 收起
Twax-967 Nanjing Tianshi New Material Technologies Co., Ltd Twax-967 is a white micronized PTFE wax powder with very uniform particle size, easy dispersion, high hardness, transparency, & smoothness, and excellent scratch & abrasion resistance. This product is suitable for use in can coatings, wood coatings, paint...展開 Twax-967 is a white micronized PTFE wax powder with very uniform particle size, easy dispersion, high hardness, transparency, & smoothness, and excellent scratch & abrasion resistance. This product is suitable for use in can coatings, wood coatings, paints, printing inks, leather coatings, and powder coatings. 收起
UVB2000 Special Tertiary Amine Acrylate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVB2000 Special Tertiary Amine Acrylate is a difunctional amine coinitiator which, when used in conjunction with a photosensitizer such as benzophenone, promotes rapid curing under UV light. Additional benefits include reduced odors, both at press side an...展開 UVB2000 Special Tertiary Amine Acrylate is a difunctional amine coinitiator which, when used in conjunction with a photosensitizer such as benzophenone, promotes rapid curing under UV light. Additional benefits include reduced odors, both at press side and in the cured film, and reduced blooming. It is ideal for use in a wide range of applications. 收起
UVB2200 Reactive Amine Acrylate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVB2200 Reactive Amine Acrylate is a very low viscosity, highly reactive amine modified polyetheracrylate oligomer for use in UV and EB curing systems. UVB2200 can be used as the sole binder or with monomer diluents. It is ideal for use in a wide range of...展開 UVB2200 Reactive Amine Acrylate is a very low viscosity, highly reactive amine modified polyetheracrylate oligomer for use in UV and EB curing systems. UVB2200 can be used as the sole binder or with monomer diluents. It is ideal for use in a wide range of applications. 收起
UVE3216 Modified Epoxy Acrylate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVE3216 Modified Epoxy Acrylate is a high molecular weight, acid modified epoxy acrylate. It blended with 10% tripropylene glycol diacrylate. It allows high gloss, fast cure response, higher flexibility and low shrikage. UVE3216 is ideal for use in a wide...展開 UVE3216 Modified Epoxy Acrylate is a high molecular weight, acid modified epoxy acrylate. It blended with 10% tripropylene glycol diacrylate. It allows high gloss, fast cure response, higher flexibility and low shrikage. UVE3216 is ideal for use in a wide range of applications. 收起
UVU 6451 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVU 6451 is a tetrafunctional aliphatic urethane acrylate oligomer developed for UV/EB-cured coatings and inks. It imparts hardness, very fast cure response, and non-yellowing characteristics to these applications.
UVU6219 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVU6219 is an aliphatic polyester based urethane diacrylate oligomer blended with 20% TPGDA, tripropylene glycol diacrylate. It is a flexible oligomer offering good weatherability, and low skin irritation. UVU6219 is ideal for use in a wide range of appli...展開 UVU6219 is an aliphatic polyester based urethane diacrylate oligomer blended with 20% TPGDA, tripropylene glycol diacrylate. It is a flexible oligomer offering good weatherability, and low skin irritation. UVU6219 is ideal for use in a wide range of applications. 收起
UVU6305 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVU6305 is a trifunctional aliphatic polyester urethane acrylate oligomer developed for use in UV and EB cured inks and coatings. Weatherability, low viscosity, and fast cure are among the key attributes of UVU6305. It is ideal for use in a wide range of ...展開 UVU6305 is a trifunctional aliphatic polyester urethane acrylate oligomer developed for use in UV and EB cured inks and coatings. Weatherability, low viscosity, and fast cure are among the key attributes of UVU6305. It is ideal for use in a wide range of applications. 收起
UVU6609 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVU6609 is a hexafunctional aliphatic urethane acrylate oligomer. It offers low viscosity and good abrasion and heat resistance. UVU6609 is ideal for use in a wide range of applications.
UVU6906 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVU6906 is a multifunctional urethane acrylate oligomer that imparts chemical resistance, fast cure response, weatherability, and abrasion resistance to radiation-cure coatings. It is ideal for use in a wide range of applications.
Ucopol M 33/65 K S.A.P.I.C.I. SpA Ucopol M 33/65 K is an aromatic moisture-curing polyurethane resin. This product has good wetting of different substrates and inks, and is compatible with alkyds, saturated polyester resins, nitrocellulose and vinyl co-polymers. It can be used in overpr...展開 Ucopol M 33/65 K is an aromatic moisture-curing polyurethane resin. This product has good wetting of different substrates and inks, and is compatible with alkyds, saturated polyester resins, nitrocellulose and vinyl co-polymers. It can be used in overprint varnishes and flexographic processes. 收起