| 99.99% Conductive Shining Flake Silver Powder | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展開 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起 | |
| 99.99% Conductive Silver Powder (Spherical) | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications. | |
| A-2468 Aluminium Paste | Silberline Manufacturing Co., Inc. | A-2468 is a coarse non-leafing aluminum pigment with cornflake geometry. | |
| A-6205 Aluminium Paste | Silberline Manufacturing Co., Inc. | A-6205 is a standard grade; class B, medium sized, leafing aluminum pigment carried in C-66 exempt mineral spirits. | |
| A-6571FG Aluminum Paste | Silberline Manufacturing Co., Inc. | A-6571FG is a standard polished grade; class A, fine particle size, leafing aluminum pigment carried in C-66 exempt mineral spirits. A-6571FG is suitable for use in aerosol paints and maintenance coatings. | |
| Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
| Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展開 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起 | |
| Alkylsulfonic Acid Ester of Phenol Plasticizer | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC. | |
| AQUA PASTE® 055-C33 | Silberline Manufacturing Co., Inc. | AQUA PASTE® 055-C33 is a passivated aluminum paste comprised of a coarse particle size, non-leafing lenticular flake that provides excellent brightness. | |
| AQUASIL® BP 3500 Inhibited Aluminum Pigment | Silberline Manufacturing Co., Inc. | AQUASIL® BP 3500 is a medium particle size, bright, non-leafing inhibited aluminum pigment for waterborne general industrial coatings. This is an economical grade with cornflake geometry and wide particle size distribution range. This grade can be used wi...展開 AQUASIL® BP 3500 is a medium particle size, bright, non-leafing inhibited aluminum pigment for waterborne general industrial coatings. This is an economical grade with cornflake geometry and wide particle size distribution range. This grade can be used with chromatic pigments to produce colored metallic effects. 收起 | |
| Aquavex® AD 010 Aluminium Pigment | Silberline Manufacturing Co., Inc. | Aquavex® AD 010 contains super fine particle size, high adhesion, aluminium flake pigment in a low dusting, easily handled form. It combines in one product the easy dispersibility of WD grades and the gassing resistance of Aqua Paste®. It is essentially f...展開 Aquavex® AD 010 contains super fine particle size, high adhesion, aluminium flake pigment in a low dusting, easily handled form. It combines in one product the easy dispersibility of WD grades and the gassing resistance of Aqua Paste®. It is essentially free of hydrocarbon solvents, but contains a passivating agent to minimise the release of hydrogen gas that can occur when aluminium flake is in contact with water. Surfactants contribute to both the low dusting property and easy dispersibility in water. Suggested applications are water-based inks and some water-based industrial paints. 收起 | |
| Aquavex® AD 015 Aluminium Pigment | Silberline Manufacturing Co., Inc. | Aquavex® AD 015 contains medium-fine particle size, high adhesion, aluminium flake pigment in a low dusting, easily handled form. It combines in one product the easy dispersibility of WD grades and the gassing resistance of Aqua Paste®. It is essentially ...展開 Aquavex® AD 015 contains medium-fine particle size, high adhesion, aluminium flake pigment in a low dusting, easily handled form. It combines in one product the easy dispersibility of WD grades and the gassing resistance of Aqua Paste®. It is essentially free of hydrocarbon solvents, but contains a passivating agent to minimise the release of hydrogen gas that can occur when aluminium flake is in contact with water. Surfactants contribute to both the low dusting property and easy dispersibility in water. Suggested applications are water-based inks and some water-based industrial paints. 收起 | |
| AQUAVEX® L Premier 021 Aluminium Pigment | Silberline Manufacturing Co., Inc. | AQUAVEX® L Premier 021 contains a medium particle size, extremely reflective aluminum flake pigment in a low dusting, easily handled form. It combines in one product the easy dispersibility of WD grades and the gassing resistance of AQUAPASTE®. It is esse...展開 AQUAVEX® L Premier 021 contains a medium particle size, extremely reflective aluminum flake pigment in a low dusting, easily handled form. It combines in one product the easy dispersibility of WD grades and the gassing resistance of AQUAPASTE®. It is essentially free of hydrocarbon solvents, but contains a passivating agent to minimize the release of hydrogen gas that can occur when aluminum flake is in contact with water. Surfactants contribute to both the low dusting property and easy dispersibility in water. Suggested applications are water-based inks and some water-based industrial paints. 收起 | |
| AQUAVEX® NL 010 Aluminium Pigment | Silberline Manufacturing Co., Inc. | AQUAVEX® NL 010 contains super fine particle size, but very bright aluminum flake pigment in a low dusting, easily handled form. It combines in one product, the easy dispersibility of WD grades and the gassing resistance of AQUA PASTE®. It is essentially ...展開 AQUAVEX® NL 010 contains super fine particle size, but very bright aluminum flake pigment in a low dusting, easily handled form. It combines in one product, the easy dispersibility of WD grades and the gassing resistance of AQUA PASTE®. It is essentially free of hydrocarbon solvents, but contains a passivating agent to minimize the release of hydrogen gas that can occur when aluminum flake is in contact with water. Surfactants contribute to both the low dusting property and easy dispersibility in water. Suggested applications are water-based inks and some water-based industrial paints. 收起 | |
| AQUAVEX® NL 013 Aluminium Pigment | Silberline Manufacturing Co., Inc. | AQUAVEX® NL 013 contains fine particle size, but very bright aluminum flake pigment in a low dusting, easily handled form. It combines in one product the easy dispersibility of WD grades and the gassing resistance of AQUA PASTE®. It is essentially free of...展開 AQUAVEX® NL 013 contains fine particle size, but very bright aluminum flake pigment in a low dusting, easily handled form. It combines in one product the easy dispersibility of WD grades and the gassing resistance of AQUA PASTE®. It is essentially free of hydrocarbon solvents, but contains a passivating agent to minimize the release of hydrogen gas that can occur when aluminum flake is in contact with water. Surfactants contribute to both the low dusting property and easy dispersibility in water. Suggested applications are water-based inks and some water-based industrial paints. 收起 | |
| AQUAVEX® NL 028 Aluminium Pigment | Silberline Manufacturing Co., Inc. | AQUAVEX® NL 028 contains coarse particle size, bright and sparkling aluminum flake pigment in a low dusting, easily handled form. It combines in one product, the easy dispersibility of WD grades and the gassing resistance of AQUA PASTE®. It is essentially...展開 AQUAVEX® NL 028 contains coarse particle size, bright and sparkling aluminum flake pigment in a low dusting, easily handled form. It combines in one product, the easy dispersibility of WD grades and the gassing resistance of AQUA PASTE®. It is essentially free of hydrocarbon solvents, but contains a passivating agent to minimize the release of hydrogen gas that can occur when aluminum flake is in contact with water. Surfactants contribute to both the low dusting property and easy dispersibility in water. Suggested applications are water-based inks and some water-based industrial paints. 收起 | |
| Cardanol | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...展開 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. 收起 | |
| ETERNABRITE® 255-PA | Silberline Manufacturing Co., Inc. | ETERNABRITE® 255-PA is an aluminum pigment paste with a small, corn-flake particle size. This product is designed to provide very strong metallic effects in liquid flexographic and gravure ink systems. It is not recommended for use in aqueous inks unless ...展開 ETERNABRITE® 255-PA is an aluminum pigment paste with a small, corn-flake particle size. This product is designed to provide very strong metallic effects in liquid flexographic and gravure ink systems. It is not recommended for use in aqueous inks unless an evaluation of stability in the final ink formulation produces desired results. ETERNABRITE® 255-PA is leafing and 74% non-volatile by weight. This grade is produced as a pigment paste carried in isopropyl alcohol but is not treated to inhibit an aluminum-water gassing reaction. 收起 | |
| ETERNABRITE® 651-1 | Silberline Manufacturing Co., Inc. | ETERNABRITE® 651-1 is a class A aluminum pigment paste with leafing values of 80% and above. This product is used to provide leafing stability, sag resistance, and a metallic appearance in aerosol paints, maintenance coatings, wheel coatings and offset in...展開 ETERNABRITE® 651-1 is a class A aluminum pigment paste with leafing values of 80% and above. This product is used to provide leafing stability, sag resistance, and a metallic appearance in aerosol paints, maintenance coatings, wheel coatings and offset inks. ETERNABRITE® 651-1 has a mesh grade of 400 and is 42% non-volatile by volume. 收起 | |
| ETERNABRITE® 651-7 | Silberline Manufacturing Co., Inc. | ETERNABRITE® 651-7 is a bright, aluminum pigment paste with a small, corn-flake particle size. This product is designed to provide good coverage and a metallic color/luster in paste inks and offset printing applications. ETERNABRITE® 651-7 is leafing and ...展開 ETERNABRITE® 651-7 is a bright, aluminum pigment paste with a small, corn-flake particle size. This product is designed to provide good coverage and a metallic color/luster in paste inks and offset printing applications. ETERNABRITE® 651-7 is leafing and 72% non-volatile by weight. 收起 | |
| ETERNABRITE® 651-PA | Silberline Manufacturing Co., Inc. | ETERNABRITE® 651-PA is a bright aluminum pigment paste with a small, corn-flake particle size. This product is designed to provide good coverage and metallic effects in liquid flexographic and gravure ink systems. It is not recommended for use in aqueous ...展開 ETERNABRITE® 651-PA is a bright aluminum pigment paste with a small, corn-flake particle size. This product is designed to provide good coverage and metallic effects in liquid flexographic and gravure ink systems. It is not recommended for use in aqueous inks unless an evaluation of stability in the final ink formulation produces desired results. ETERNABRITE® 651-PA is leafing and 70% non-volatile by weight. 收起 | |
| ETERNABRITE® Premier 351-PA | Silberline Manufacturing Co., Inc. | ETERNABRITE® Premier 351-PA is a bright aluminum pigment paste with a coarse particle size. This product is designed to provide strong metallic effects in solvent, liquid flexographic and gravure inks. It is not recommended for use in aqueous inks unless ...展開 ETERNABRITE® Premier 351-PA is a bright aluminum pigment paste with a coarse particle size. This product is designed to provide strong metallic effects in solvent, liquid flexographic and gravure inks. It is not recommended for use in aqueous inks unless an evaluation of stability in the final ink formulation produces desired results. ETERNABRITE® Premier 351-PA is leafing and 77% non-volatile by weight. 收起 | |
| Extra Fine GH Aluminum Paste | Silberline Manufacturing Co., Inc. | Extra Fine GH is suitable for use in aerosol, anti-corrosive and maintenance coatings in which high aromatic solvent content is desired. This product is particularly suitable in applications requiring a small particle size standard leafing aluminum pigmen...展開 Extra Fine GH is suitable for use in aerosol, anti-corrosive and maintenance coatings in which high aromatic solvent content is desired. This product is particularly suitable in applications requiring a small particle size standard leafing aluminum pigment with good brightness. 收起 | |
| Fumed Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....展開 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 收起 | |
| Hydroxypropyl Aistarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive. | |
| L-1015 Aluminum Paste | Silberline Manufacturing Co., Inc. | L-1015 is a standard grade, class “C”, coarse leafing aluminum pigment carried in regular mineral spirits. | |
| L-10545WD Aluminum Pigment | Silberline Manufacturing Co., Inc. | L-10545WD is an aluminum pigment paste based on a small particle size aluminum flake. The aluminum pigment flake is carried in a mixture of mineral spirits and diethylene glycol. L-10545WD contains an emulsifier to aid in the dispersion of the aluminum pi...展開 L-10545WD is an aluminum pigment paste based on a small particle size aluminum flake. The aluminum pigment flake is carried in a mixture of mineral spirits and diethylene glycol. L-10545WD contains an emulsifier to aid in the dispersion of the aluminum pigment flake in concrete mixtures and aqueous coatings systems. Although compatible with a variety of aqueous systems, L-10545WD is not chemically passivated to resist reaction with water. L-10545WD should be tested in each aqueous formulation to determine its reactivity. 收起 | |
| L-11085 Aluminum Paste | Silberline Manufacturing Co., Inc. | L-10545WD is a non-leafing aluminum paste. | |
| L-12683 | Silberline Manufacturing Co., Inc. | L-12683 is a bright, aluminum flake pigment paste that is carried in isopropyl acetate. This product is designed to provide high opacity and strong metallic effects in liquid flexographic and gravure ink systems. L-12683 is non-leafing and dispersible in ...展開 L-12683 is a bright, aluminum flake pigment paste that is carried in isopropyl acetate. This product is designed to provide high opacity and strong metallic effects in liquid flexographic and gravure ink systems. L-12683 is non-leafing and dispersible in all common organic solvents except aliphatic hydrocarbons. 收起 | |
| L-406AR Aluminum Paste | Silberline Manufacturing Co., Inc. | L-406AR is a medium particle size, bright, non-leafing aluminum pigment with a narrow particle size distribution. It provides exceptional brightness and is high purity. | |
| Lansford 243 Aluminum Paste | Silberline Manufacturing Co., Inc. | Lansford 243 is a fine particle size, non-leafing aluminum pigment with good opacity for solvent -based maintenance coatings and general industrial coatings. This is a very economical grade with cornflake geometry and wide particle size distribution range...展開 Lansford 243 is a fine particle size, non-leafing aluminum pigment with good opacity for solvent -based maintenance coatings and general industrial coatings. This is a very economical grade with cornflake geometry and wide particle size distribution range. This grade is not recommended for use with chromatic pigments and is typically used to create a muted masstone appearance with good opacity and cost. 收起 | |
| Lansford 243GH Aluminum Paste | Silberline Manufacturing Co., Inc. | Lansford 243GH is a fine particle size, non-leafing aluminum pigment carried in high aromatic solvent with good opacity for solvent -based maintenance coatings and general industrial coatings. This is a very economical grade with cornflake geometry and wi...展開 Lansford 243GH is a fine particle size, non-leafing aluminum pigment carried in high aromatic solvent with good opacity for solvent -based maintenance coatings and general industrial coatings. This is a very economical grade with cornflake geometry and wide particle size distribution range. This grade is not recommended for use with chromatic pigments and is typically used to create a muted masstone appearance with good opacity and cost. 收起 | |
| LE-12773 | Silberline Manufacturing Co., Inc. | LE-12773 is an organically surface treated aluminum pigment with a fine, corn-flake particle size. This product is designed to provide bright face color, hiding power and reduced explosion risk in printing inks, automotive coatings, and powder coatings. L...展開 LE-12773 is an organically surface treated aluminum pigment with a fine, corn-flake particle size. This product is designed to provide bright face color, hiding power and reduced explosion risk in printing inks, automotive coatings, and powder coatings. LE-12773 is non-leafing and can impart improved chemical and environmental resistance properties in final coatings. 收起 | |
| LE-12774 | Silberline Manufacturing Co., Inc. | LE-12774 is an organically surface treated aluminum pigment with a fine, round-flake particle size. This product is designed to provide bright face color and hiding power in printing inks, automotive coatings, and powder coatings. LE-12774 is non-leafing ...展開 LE-12774 is an organically surface treated aluminum pigment with a fine, round-flake particle size. This product is designed to provide bright face color and hiding power in printing inks, automotive coatings, and powder coatings. LE-12774 is non-leafing and can impart improved chemical and environmental resistance properties in final coatings. 收起 | |
| LT-1094 Aluminium Pigment | Silberline Manufacturing Co., Inc. | LT-1094 is a fine particle size aluminum pigment produced in pellet form to reduce the potential for generating airborne pigment particles and to improve ease of handling. This is an economical grade and can be used to create a gray masstone metallic appe...展開 LT-1094 is a fine particle size aluminum pigment produced in pellet form to reduce the potential for generating airborne pigment particles and to improve ease of handling. This is an economical grade and can be used to create a gray masstone metallic appearance with good opacity at low cost. This grade is not recommended for use with chromatic pigments as it will not produce clean color effects. Although this grade is based on a leafing aluminum pigment, it will not exhibit leafing characteristics in most plastic applications. LT-1094 is suitable for use in both plastics and powder coating applications. 收起 | |
| LT-12605 Aluminum Pigment | Silberline Manufacturing Co., Inc. | LT-12605 is a medium particle size, bright, Tufflake® Premier aluminum produced in pellet form to reduce the potential for generating airborne particles and to improve ease of handling. | |
| LX-12860 Aluminum Paste | Silberline Manufacturing Co., Inc. | LX-12860 is a fine, bright aluminum flake product suitable for use in cross-link foam applications that require aluminum flake pigment and flame retardant carrier. | |
| Methyltriethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silico...展開 Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silicone resins and silicone rubber,silicone resins and silicone rubber. 收起 | |
| Methyltrimethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainl...展開 Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainly used as the crosslinking agent of room temperature vulcanized silicone rubber, as well as the glass fiber surface treatment agent and reinforced plastic laminate treatment agent, in order to improve the mechanical strength of products, heat resistance, moisture resistance. 收起 | |
| Modified Starch - Compound Active Printing Paste | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological pro...展開 Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Modified Starch - High End | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holdi...展開 Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. 收起 | |
| Modified Starch - Mid Range | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, ...展開 Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Nano Silver Powder TFNP-30 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Nano Silver Powder TFNP-30 is a moderate tap density,high dispersion, spherical nanometer silver powder. TFNP-30 is ideal for low-temperature sintering paste, low silver content and high conductive paste, and touchscreen slurry. | |
| Nano Silver Powder TFNP-80 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Nano Silver Powder TFNP-80 is a moderate tap density, nanoscale spherical monodisperse silver. It is mainly used as an additive material. | |
| ND-22 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | ND-22 is used as cross-linking agent for RTV Silicone Rubber and reinforcing for epoxy fiber glass reinforced plastics, viscosity increaser for synthetic resin and raw stuff fabric racked agent. | |
| Precipitated Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixi...展開 Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixing solutions of sodium silicate with sulfuric acid in water. A chemical reaction occurs, and pellets of pure silica form. 收起 | |
| PVB | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PV...展開 Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PVB has high transparency, good cold resistance, water resistance, film forming properties and impact resistance, widely used in middle film of glass, ceramic flower paper, metal protective paint, tipping paper, aluminum foil, insulation paint, fiber treatment agent, finished parts, printing inks, dyes and so on. 收起 | |
| PVC Paste | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | PVC Paste is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , go...展開 PVC Paste is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , good electrical insulation , thermoplasticity and membrane forming capacity. They are essential materials for preparing PVC compounds. By adding blending agents and employing different techniques, they can be made into rigid or non-rigid PVC products and are suppliable in a wide range of transparent, translucent, and opaque colours. 收起 | |
| SCA-Y25E | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of t...展開 SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. SCA-Y25E can be used in a number of applications. 收起 | |
| SCA-Y25M | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion o...展開 SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. It can be used in a number of applications. 收起 | |
| SIL-O-WET® 011 NL-PA | Silberline Manufacturing Co., Inc. | SIL-O-WET® 011 NL-PA is an aluminum pigment with a fine, corn-flake particle size. This product is treated with a chemical inhibitor to reduce reactions with water and is typically applied in aqueous flexographic and gravure ink formulations. This grade c...展開 SIL-O-WET® 011 NL-PA is an aluminum pigment with a fine, corn-flake particle size. This product is treated with a chemical inhibitor to reduce reactions with water and is typically applied in aqueous flexographic and gravure ink formulations. This grade can be also be used in combination with transparent pigments and dyes to produce a spectrum of bright, clean metallic colors. SIL-O-WET® 011 NL-PA is non-leafing and 65% non-volatile by weight. 收起 | |
| SIL-O-WET® 2052 NL-PA | Silberline Manufacturing Co., Inc. | SIL-O-WET® 2052 NL-PA is an aluminum pigment with a fine, coarse particle size. This product is treated with a chemical inhibitor to reduce reactions with water and is typically applied in aqueous flexographic and gravure ink formulations. This grade can ...展開 SIL-O-WET® 2052 NL-PA is an aluminum pigment with a fine, coarse particle size. This product is treated with a chemical inhibitor to reduce reactions with water and is typically applied in aqueous flexographic and gravure ink formulations. This grade can be also be used in combination with transparent pigments and dyes to produce a spectrum of bright, clean metallic colors. SIL-O-WET® 2052 NL-PA is non-leafing and 64% non-volatile by weight. 收起 | |
| SIL-O-WET® 651-PA | Silberline Manufacturing Co., Inc. | SIL-O-WET® 651-PA is a leafing aluminum pigment with a fine, corn-flake particle size. This product is treated with a chemical inhibitor to reduce reactions with water and is typically applied in aqueous ink systems. SIL-O-WET® 651-PA is 68% non-volatile ...展開 SIL-O-WET® 651-PA is a leafing aluminum pigment with a fine, corn-flake particle size. This product is treated with a chemical inhibitor to reduce reactions with water and is typically applied in aqueous ink systems. SIL-O-WET® 651-PA is 68% non-volatile by weight and provides opacity, brightness, and a strong metallic effect. 收起 | |
| SIL-O-WET® Premier 014NL-PA Inhibited Aluminum Pigment | Silberline Manufacturing Co., Inc. | SIL-O-WET® Premier 014NL-PA is a fine particle size, brilliant, non-leafing aluminum pigment treated with a chemical inhibitor to reduce its tendency to react with water. It is recommended for use in aqueous ink systems. This grade can be used in combinat...展開 SIL-O-WET® Premier 014NL-PA is a fine particle size, brilliant, non-leafing aluminum pigment treated with a chemical inhibitor to reduce its tendency to react with water. It is recommended for use in aqueous ink systems. This grade can be used in combination with transparent dyes or pigments to produce a spectrum of bright, clean metallic colors. 收起 | |
| Silane ATPN-1100 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to ...展開 Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to substrates. The primary amine function reacts with a wide array of thermoset, thermoplastic, and elastomeric materials. 收起 | |
| Silane ATPN-1110 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion an...展開 Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion and wet ability of filler in the high molecular materials. ATPN-1110 is an excellent promoter of adhesion and sealant (such as polyurethane, epoxy, and phenol). In the glass wool and FRP products, it can be added into phenol resins to improve the wet resistance and mechanical performance. 收起 | |
| Silane ATPN-1120 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of...展開 Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone-polymers or as crosslinker (moisture crosslinking of polymers). The application as“coupling agent”leads in general to an improvement of mechanical and electrical product properties above all under exposure to heat and/or moisture. 收起 | |
| Silane Coupling Agent Si-69 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strengt...展開 Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strength, tearing strength and abrasive resistance and reduce compression set of vulcanizates. In addition, it can reduce the viscosity and improve the processability of rubber products. Si-69 is especially suitable to improve the reinforcing properties of fillers that contain hydroxyl groups in all unsaturated polymers having double bonds or their blends. 收起 | |
| SILBERCOTE® AQ 313 F2X Inhibited Aluminum Dispersion | Silberline Manufacturing Co., Inc. | SILBERCOTE® AQ 313 F2X is a coarse particle size, non-leafing, super purity, silver dollar grade in a pre-passivated paste form. | |
| SILBERCOTE® AQ E2154 F2X | Silberline Manufacturing Co., Inc. | SILBERCOTE® AQ E2154 F2X is a lenticular or silver dollar colored aluminum pigment paste designed to resist aqueous attack and promote opacity, face color, and dark flop. This product is non-leafing and typically applied in waterborne industrial coatings ...展開 SILBERCOTE® AQ E2154 F2X is a lenticular or silver dollar colored aluminum pigment paste designed to resist aqueous attack and promote opacity, face color, and dark flop. This product is non-leafing and typically applied in waterborne industrial coatings and water-based printing inks. SILBERCOTE® AQ E2154 F2X has a fine particle size and can also be used in various waterborne systems. 收起 | |
| SILBERCOTE® AQ E2169 F3X Inhibited Aluminum Pigment | Silberline Manufacturing Co., Inc. | SILBERCOTE® AQ E2169 F3X is a fine particle size, regular purity, cornflake pigment paste, passivated to resist aqueous attack. | |
| SILBERCOTE® PC 3101X | Silberline Manufacturing Co., Inc. | SILBERCOTE® PC 3101X is an inorganically surface treated aluminum pigment with a medium, corn-flake shaped particle size. This product is typically used to provide face color and a sparkle appearance in automotive coatings, powder coatings, and printing i...展開 SILBERCOTE® PC 3101X is an inorganically surface treated aluminum pigment with a medium, corn-flake shaped particle size. This product is typically used to provide face color and a sparkle appearance in automotive coatings, powder coatings, and printing inks. SILBERCOTE® PC 3101X is non-leafing and 99% non-volatile by weight. 收起 | |
| SILBERCOTE® PC 4852X | Silberline Manufacturing Co., Inc. | SILBERCOTE® PC 4852X is an inorganically surface treated aluminum pigment with a medium, silver-dollar colored particle size. This product is typically used to provide a bright, sparkle effect in automotive coatings, powder coatings, and printing inks. SI...展開 SILBERCOTE® PC 4852X is an inorganically surface treated aluminum pigment with a medium, silver-dollar colored particle size. This product is typically used to provide a bright, sparkle effect in automotive coatings, powder coatings, and printing inks. SILBERCOTE® PC 4852X is non-leafing and 99% non-volatile by weight. 收起 | |
| SILBERCOTE® PC 6222X | Silberline Manufacturing Co., Inc. | SILBERCOTE® PC 6222X is an inorganically surface treated aluminum pigment with a medium, corn-flake shaped particle size. This product is typically used to provide dark flop, a bright face color and hiding power in automotive coatings, powder coatings, an...展開 SILBERCOTE® PC 6222X is an inorganically surface treated aluminum pigment with a medium, corn-flake shaped particle size. This product is typically used to provide dark flop, a bright face color and hiding power in automotive coatings, powder coatings, and printing inks. SILBERCOTE® PC 6222X is non-leafing and 99% non-volatile by weight. Risk of explosion and environmental contamination is reduced by using this product in formulation. 收起 | |
| SILBERCOTE® PC 6792X | Silberline Manufacturing Co., Inc. | SILBERCOTE® PC 6792X is an inorganically surface treated aluminum pigment with a medium particle size. This product is typically used to provide dark flop, a bright face color and hiding power in automotive coatings, metallic powder coatings, and printin...展開 SILBERCOTE® PC 6792X is an inorganically surface treated aluminum pigment with a medium particle size. This product is typically used to provide dark flop, a bright face color and hiding power in automotive coatings, metallic powder coatings, and printing inks. SILBERCOTE® PC 6792X is non-leafing and 99% non-volatile by weight. Risk of explosion and environmental contamination is reduced by using this product in formulation. 收起 | |
| SILBERCOTE® PC 8153X | Silberline Manufacturing Co., Inc. | SILBERCOTE® PC 8153X is an inorganically surface treated aluminum pigment with a fine, corn-flake shaped particle size. This product is typically used to provide a bright face color and hiding power in automotive coatings, powder coatings, and printing in...展開 SILBERCOTE® PC 8153X is an inorganically surface treated aluminum pigment with a fine, corn-flake shaped particle size. This product is typically used to provide a bright face color and hiding power in automotive coatings, powder coatings, and printing inks. SILBERCOTE® PC 8153X is non-leafing and 99% non-volatile by weight. 收起 | |
| SILBERCOTE® PC 8602X | Silberline Manufacturing Co., Inc. | SILBERCOTE® PC 8602X is an inorganically surface treated aluminum pigment with a fine, high purity, silver-dollar colored particle size. This product is typically used to provide a bright face color and hiding power in automotive coatings, powder coatings...展開 SILBERCOTE® PC 8602X is an inorganically surface treated aluminum pigment with a fine, high purity, silver-dollar colored particle size. This product is typically used to provide a bright face color and hiding power in automotive coatings, powder coatings, and printing inks. SILBERCOTE® PC 8602X is non-leafing and 99% non-volatile by weight. 收起 | |
| SILCROMA DR15 Iron Pigment | Silberline Manufacturing Co., Inc. | SILCROMA DR15 is an iron flake pigment in a dry powder form. It has low dusting characteristics, due to a controlled particle size distribution that reduces the proportion of very fine particles present. A key feature is very wide polymer compatibility. D...展開 SILCROMA DR15 is an iron flake pigment in a dry powder form. It has low dusting characteristics, due to a controlled particle size distribution that reduces the proportion of very fine particles present. A key feature is very wide polymer compatibility. DR15 provides a silvery, grey speckled appearance in transparent, white or pale coloured polymer matrices at a concentration of about 1-3% on polymer. At higher addition levels DR15 can impart properties to the pigmented polymer that allow it to be detected by metal detectors or magnets. 收起 | |
| SILICONE FLUID ATPN-100 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICON...展開 SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-100 is ideal for use in a wide range of applications. 收起 | |
| SILICONE FLUID ATPN-1000 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICO...展開 SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-1000 is ideal for use in a wide range of applications. 收起 | |
| SILVAR A Aluminum Paste | Silberline Manufacturing Co., Inc. | SILVAR A is a standard grade; medium particle size, leafing aluminum pigment carried in mineral spirits. SILVAR A is suitable for use in roof coatings and maintenance coatings. | |
| SILVET® 210-20-J | Silberline Manufacturing Co., Inc. | SILVET® 210-20-J is a bright, leafing aluminum pigment with a fine, corn-flake particle size. This product is designed to provide good coverage and strong metallic effects in solvent, liquid flexographic, and gravure inks. SILVET® 210-20-J is soluble in e...展開 SILVET® 210-20-J is a bright, leafing aluminum pigment with a fine, corn-flake particle size. This product is designed to provide good coverage and strong metallic effects in solvent, liquid flexographic, and gravure inks. SILVET® 210-20-J is soluble in ester and ketone solvents but not soluble in alcohols. 收起 | |
| SILVET® 320-20-J | Silberline Manufacturing Co., Inc. | SILVET® 320-20-J is a bright, leafing aluminum pigment with a fine, corn-flake particle size. This product is designed to provide good coverage and strong metallic effects in solvent, liquid flexographic, and gravure ink formulations. SILVET® 320-20-J is ...展開 SILVET® 320-20-J is a bright, leafing aluminum pigment with a fine, corn-flake particle size. This product is designed to provide good coverage and strong metallic effects in solvent, liquid flexographic, and gravure ink formulations. SILVET® 320-20-J is soluble in ester and ketone solvents but not soluble in alcohols. 收起 | |
| SILVET® 540-20-E Aluminum Pigment | Silberline Manufacturing Co., Inc. | SILVET® 540-20-E is a medium sized aluminum pigment produced in pellet form to reduce the potential for generating airborne pigment particles and to improve ease of handling. | |
| SILVET® AD 007 | Silberline Manufacturing Co., Inc. | SILVET® AD 007 is a dry and low dusting aluminum pigment with a fine, granular, corn-flake particle size. This product is designed to provide dispersing capabilities and adhesion in printing ink applications including solvent-based gravure and flexographi...展開 SILVET® AD 007 is a dry and low dusting aluminum pigment with a fine, granular, corn-flake particle size. This product is designed to provide dispersing capabilities and adhesion in printing ink applications including solvent-based gravure and flexographic inks. SILVET® AD 007 is 99% non-volatile by weight and is also used to display optimal opacity in polymer films. 收起 | |
| SILVET® AD 013 | Silberline Manufacturing Co., Inc. | SILVET® AD 013 is a bright, low dusting aluminum pigment with a fine, granular, corn-flake particle size. This product is designed to provide dispersing capabilities in printing ink applications and formulas including solvent-based gravure and flexographi...展開 SILVET® AD 013 is a bright, low dusting aluminum pigment with a fine, granular, corn-flake particle size. This product is designed to provide dispersing capabilities in printing ink applications and formulas including solvent-based gravure and flexographic inks. SILVET® AD 013 is 99% non-volatile by weight. 收起 | |
| SILVET® AD 015 | Silberline Manufacturing Co., Inc. | SILVET® AD 015 is a bright, low dusting aluminum pigment with a medium-fine, granular, corn-flake particle size. This product is designed to maximize formulation flexibility while ensuring easy dispersibility in printing ink applications. SILVET® AD 015 i...展開 SILVET® AD 015 is a bright, low dusting aluminum pigment with a medium-fine, granular, corn-flake particle size. This product is designed to maximize formulation flexibility while ensuring easy dispersibility in printing ink applications. SILVET® AD 015 is especially suitable for solvent-based gravure and flexographic inks where optimal opacity and adhesion are required. 收起 | |
| SILVET® AD 101 | Silberline Manufacturing Co., Inc. | SILVET® AD 101 is a dry and low dusting aluminum pigment with an ultra- fine, granular, corn-flake particle size. This product is designed to provide dispersing capabilities and adhesion in printing ink applications including solvent-based gravure and fle...展開 SILVET® AD 101 is a dry and low dusting aluminum pigment with an ultra- fine, granular, corn-flake particle size. This product is designed to provide dispersing capabilities and adhesion in printing ink applications including solvent-based gravure and flexographic inks. SILVET® AD 101 is 99% non-volatile by weight and is also used to display optimal opacity in polymer films. 收起 | |
| SILVET® AD Premier 011 | Silberline Manufacturing Co., Inc. | SILVET® AD Premier 011 is a bright, low dusting aluminum pigment with a fine, flake particle size. This product is designed to provide opacity, adhesion, and maximum formulation flexibility in gravure and flexographic inks. SILVET® AD Premier 011 is 99% n...展開 SILVET® AD Premier 011 is a bright, low dusting aluminum pigment with a fine, flake particle size. This product is designed to provide opacity, adhesion, and maximum formulation flexibility in gravure and flexographic inks. SILVET® AD Premier 011 is 99% non-volatile by weight and non-leafing. 收起 | |
| SILVET® AD Premier 016 | Silberline Manufacturing Co., Inc. | SILVET® AD Premier 016 is a bright, low dusting aluminum pigment with a medium, flake particle size. This product is designed to provide opacity, adhesion, and maximum formulation flexibility in gravure and flexographic inks. SILVET® AD Premier 016 is 99%...展開 SILVET® AD Premier 016 is a bright, low dusting aluminum pigment with a medium, flake particle size. This product is designed to provide opacity, adhesion, and maximum formulation flexibility in gravure and flexographic inks. SILVET® AD Premier 016 is 99% non-volatile by weight and non-leafing. 收起 | |
| SILVET® AD Ultra 012 | Silberline Manufacturing Co., Inc. | SILVET® AD Ultra 012 is a low dusting aluminum pigment that is widely compatible with a very fine particle size. This product is designed to provide narrow particle size distribution, opacity, and adhesion in flexographic inks. SILVET® AD Ultra 012 is non...展開 SILVET® AD Ultra 012 is a low dusting aluminum pigment that is widely compatible with a very fine particle size. This product is designed to provide narrow particle size distribution, opacity, and adhesion in flexographic inks. SILVET® AD Ultra 012 is non-leafing and 99% non-volatile by weight. 收起 | |
| SILVET® AD Ultra 015 | Silberline Manufacturing Co., Inc. | SILVET® AD Ultra 015 is a low dusting aluminum pigment that is widely compatible with a medium-fine particle size. This product is designed to provide narrow particle size distribution, opacity, adhesion, and a strong silver-dollar coloring in solvent-bas...展開 SILVET® AD Ultra 015 is a low dusting aluminum pigment that is widely compatible with a medium-fine particle size. This product is designed to provide narrow particle size distribution, opacity, adhesion, and a strong silver-dollar coloring in solvent-based inks. SILVET® AD Ultra 015 is non-leafing and 99% non-volatile by weight. 收起 | |
| SILVEX® 113-20-C Aluminum Pigment | Silberline Manufacturing Co., Inc. | SILVEX® 113-20-C is a small particle size aluminum pigment dampened with mineral oil to minimize the potential for generating airborne pigment particles. This is an economical grade with cornflake geometry and wide particle size distribution range. Due to...展開 SILVEX® 113-20-C is a small particle size aluminum pigment dampened with mineral oil to minimize the potential for generating airborne pigment particles. This is an economical grade with cornflake geometry and wide particle size distribution range. Due to its small particle size and broad particle size distribution, this grade is well suited for imparting opacity at low loading levels. This is an economical grade and can be used to create a muted masstone metallic appearance with good opacity at low cost. This grade is not recommended for use with chromatic pigments as it will not produce clean color effects. Although this grade is based on a leafing aluminum pigment, it will not exhibit leafing characteristics in most plastic applications. 收起 | |
| SILVEX® 223-20-C Aluminum Pigment | Silberline Manufacturing Co., Inc. | SILVEX® 223-20-C is a fine particle size aluminum pigment dampened with mineral oil to minimize the potential for generating airborne pigment particles. This is an economical grade with cornflake geometry and wide particle size distribution range. Due to ...展開 SILVEX® 223-20-C is a fine particle size aluminum pigment dampened with mineral oil to minimize the potential for generating airborne pigment particles. This is an economical grade with cornflake geometry and wide particle size distribution range. Due to its fine particle size and broad particle size distribution, this grade is well suited for imparting opacity at low loading levels. This is an economical grade and can be used to create a muted masstone metallic appearance with good opacity at low cost. This grade is not recommended for use with chromatic pigments as it will not produce clean color effects. Although this grade is based on a leafing aluminum pigment, it will not exhibit leafing characteristics in most plastic applications. 收起 | |
| SILVEX® 420-15-C Aluminum Pigment | Silberline Manufacturing Co., Inc. | SILVEX® 420-15-C is a very coarse particle size, bright, non-leafing aluminum pigment dampened with mineral oil to minimize the potential for generating airborne pigment particles. | |
| SILVEX® 430-15-C Aluminum Pigment | Silberline Manufacturing Co., Inc. | SILVEX® 430-15-C is a very coarse, thick, non-leafing aluminum flake. | |
| SILVEX® 430-15-D Aluminum Pigment | Silberline Manufacturing Co., Inc. | SILVEX® 430-15-D is a very coarse, thick, non-leafing aluminum flake. | |
| SILVEX® 440-15-C Aluminum Pigment | Silberline Manufacturing Co., Inc. | SILVEX® 440-15-C is a medium-coarse particle size, bright aluminum glitter pigment dampened with mineral oil to minimize the potential for generating airborne pigment particles. This grade can be used to simulate metallic effects similar to those of 50 mi...展開 SILVEX® 440-15-C is a medium-coarse particle size, bright aluminum glitter pigment dampened with mineral oil to minimize the potential for generating airborne pigment particles. This grade can be used to simulate metallic effects similar to those of 50 micron by 50 micron chopped foil pigments. This grade has a narrow particle size distribution range and will produce medium coarse glitter effects when used alone or with chromatic pigments or dyes. Due to its narrow distribution range this grade can be used to create metallic effects with minimal flow line appearance. 收起 | |
| SPARKLE SILVER® 3130-AR | Silberline Manufacturing Co., Inc. | SPARKLE SILVER® 3130-AR is a high sparkle, non-leafing aluminum paste pigment with a coarse, corn-flake particle size. This product is used to provide acid resistance, high sparkle, white face color, and deep flop in automotive finishes. SPARKLE SILVER® 3...展開 SPARKLE SILVER® 3130-AR is a high sparkle, non-leafing aluminum paste pigment with a coarse, corn-flake particle size. This product is used to provide acid resistance, high sparkle, white face color, and deep flop in automotive finishes. SPARKLE SILVER® 3130-AR can also be applied to printing screen inks and is 74% non-volatile by weight. 收起 | |
| SPARKLE SILVER® 3500 | Silberline Manufacturing Co., Inc. | SPARKLE SILVER® 3500 is an aluminum pigment paste with a medium, corn-flake particle size. This product is designed to provide formulators with an economical aluminum flake in hammer finishes, coil coatings, screen printing inks, aerosols, and general ind...展開 SPARKLE SILVER® 3500 is an aluminum pigment paste with a medium, corn-flake particle size. This product is designed to provide formulators with an economical aluminum flake in hammer finishes, coil coatings, screen printing inks, aerosols, and general industrial coatings. SPARKLE SILVER® 3500 is non-leafing and 65% non-volatile by weight. 收起 | |
| SPARKLE SILVER® 3622 | Silberline Manufacturing Co., Inc. | SPARKLE SILVER® 3622 is a regular purity, non-leafing aluminum paste pigment with a medium, corn-flake shaped particle size. This product is used to provide formulators with high sparkle, white face color, deep flop, and low opacity in high quality indus...展開 SPARKLE SILVER® 3622 is a regular purity, non-leafing aluminum paste pigment with a medium, corn-flake shaped particle size. This product is used to provide formulators with high sparkle, white face color, deep flop, and low opacity in high quality industrial finishes, bicycle paints, screen printing inks and automotive component paints. SPARKLE SILVER® 3622 is 78% non-volatile by weight and has a mesh grade of 325. 收起 | |
| SPARKLE SILVER® 5500 | Silberline Manufacturing Co., Inc. | SPARKLE SILVER® 5500 is a non-leafing aluminum pigment paste with a fine, corn-flake particle size. This product is used to promote wide particle size distribution in metallic automotive finishes and industrial finishes where good performance in thin film...展開 SPARKLE SILVER® 5500 is a non-leafing aluminum pigment paste with a fine, corn-flake particle size. This product is used to promote wide particle size distribution in metallic automotive finishes and industrial finishes where good performance in thin films is necessary. SPARKLE SILVER® 5500 is also available in granular form for use in plastics and solvent-based liquid inks. 收起 | |
| SPARKLE SILVER® 6246-AR | Silberline Manufacturing Co., Inc. | SPARKLE SILVER® 6246-AR is a high purity aluminum pigment paste with a high degree of flake orientation. This product is used to provide distinctness of image, gloss and deep flop in automotive and screen printing inks, automotive paints, automotive finis...展開 SPARKLE SILVER® 6246-AR is a high purity aluminum pigment paste with a high degree of flake orientation. This product is used to provide distinctness of image, gloss and deep flop in automotive and screen printing inks, automotive paints, automotive finishes, and two-coat systems. SPARKLE SILVER® 6246-AR is non-leafing and 62% non-volatile by weight. 收起 | |
| SPARKLE SILVER® 7500 | Silberline Manufacturing Co., Inc. | SPARKLE SILVER® 7500 is an aluminum pigment paste with regular purity and a fine, corn-flake particle size. This product is designed to provide excellent hiding and high gloss in general industrial coatings and screen printing inks. SPARKLE SILVER® 7500 i...展開 SPARKLE SILVER® 7500 is an aluminum pigment paste with regular purity and a fine, corn-flake particle size. This product is designed to provide excellent hiding and high gloss in general industrial coatings and screen printing inks. SPARKLE SILVER® 7500 is non-leafing and 64% non-volatile by weight. 收起 | |
| SPARKLE SILVER® E3000-AR | Silberline Manufacturing Co., Inc. | SPARKLE SILVER® E3000-AR is an acid resistant, non-leafing aluminum pigment paste. This product is designed to provide opacity and high sparkle in high quality industrial finishes, general industrial coatings, automotive component coatings, and screen pri...展開 SPARKLE SILVER® E3000-AR is an acid resistant, non-leafing aluminum pigment paste. This product is designed to provide opacity and high sparkle in high quality industrial finishes, general industrial coatings, automotive component coatings, and screen printing inks. SPARKLE SILVER® E3000-AR has a coarse particle size and is 65% non-volatile by weight. 收起 | |
| SPARKLE SILVER® E5500 | Silberline Manufacturing Co., Inc. | SPARKLE SILVER® E5500 is an aluminum flake pigment paste with a medium particle size. This product is designed to provide wide particle distribution in industrial finishes, solvent-based liquid inks and screen printing inks. SPARKLE SILVER® E5500 is non-l...展開 SPARKLE SILVER® E5500 is an aluminum flake pigment paste with a medium particle size. This product is designed to provide wide particle distribution in industrial finishes, solvent-based liquid inks and screen printing inks. SPARKLE SILVER® E5500 is non-leafing and 64% non-volatile by weight. 收起 | |
| SPARKLE SILVER Elite 012 Aluminum Paste | Silberline Manufacturing Co., Inc. | SPARKLE SILVER Elite 012 is a fine particle size, silver dollar aluminum flake pigment. When properly formulated, SPARKLE SILVER Elite 012 exhibits a smooth, highly reflective finish. | |
| SPARKLE SILVER® Premier 683 Aluminum Paste | Silberline Manufacturing Co., Inc. | SPARKLE SILVER® Premier 683 is a regular purity, fine particle size, non-leafing, lenticular flake that provides excellent brightness. SPARKLE SILVER Premier flakes provide more uniform surf aces than SPARKLE SILVER products, and also sharper edges and co...展開 SPARKLE SILVER® Premier 683 is a regular purity, fine particle size, non-leafing, lenticular flake that provides excellent brightness. SPARKLE SILVER Premier flakes provide more uniform surf aces than SPARKLE SILVER products, and also sharper edges and controlled particle size distribution. "SPARKLE SILVER Premier or silver dollar" technology provides whiter, brighter, and cleaner polychromatic effects. 收起 | |
| SPARKLE SILVER ULTRA® 011LM Aluminum Paste | Silberline Manufacturing Co., Inc. | SPARKLE SILVER ULTRA® 011LM is a fine particle size, silver dollar aluminum flake pigment. When properly formulated, SPARKLE SILVER ULTRA 011LM exhibits a smooth, highly reflective finish and a near chrome-like appearance. | |
| SPARKLE SILVER ULTRA® 018LM Aluminum Paste | Silberline Manufacturing Co., Inc. | SPARKLE SILVER ULTRA® 018LM Aluminum Paste is a medium size aluminum flake with a round geometry. It presents an uncharacteristically smooth finish and near chrome-like appearance when properly formulated in specialty coatings. |
