| 99.99% Conductive Shining Flake Silver Powder | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展開 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起 | |
| 99.99% Conductive Silver Powder (Spherical) | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications. | |
| Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
| Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展開 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起 | |
| Acrylated Amine Oligomer SZ 225 | Soltech Ltd | Acrylated Amine Oligomer SZ 225 is an acrylate functional oligomeric amine resin designed to provide low viscosity, pigment wetting, adhesion, and high gloss. Common applications of this product include plastic coatings, plastic adhesives, screen ink vehi...展開 Acrylated Amine Oligomer SZ 225 is an acrylate functional oligomeric amine resin designed to provide low viscosity, pigment wetting, adhesion, and high gloss. Common applications of this product include plastic coatings, plastic adhesives, screen ink vehicles, clear paper coatings, wood coatings, and wood fillers. Acrylated Amine Oligomer SZ 225 is 100% polymer solid by weight with a viscosity of 500-1,100 at 25℃. 收起 | |
| Acrylic Acrylate SA 3710 | Soltech Ltd | Acrylic Acrylate SA 3710 is an acrylic oligomer diluted with 60% of 1,6 hexanediol diacrylate that is designed to provide substrate adhesion, exterior durability, and light color. This product is commonly applied in clear plastic coatings and silk screen ...展開 Acrylic Acrylate SA 3710 is an acrylic oligomer diluted with 60% of 1,6 hexanediol diacrylate that is designed to provide substrate adhesion, exterior durability, and light color. This product is commonly applied in clear plastic coatings and silk screen inks. Acrylic Acrylate SA 3710 is 40% polymer solid by weight with a viscosity of 18,000-30,000 at 25℃. 收起 | |
| Aliphatic Urethane Acrylate SU 500 | Soltech Ltd | Aliphatic Urethane Acrylate SU 500 is a aliphatic urethane diacrylate containing isobornyl acrylate that is designed to provide adhesion, a light color, flexibility, and toughness. Common applications of this product include screen inks, plastic coatings,...展開 Aliphatic Urethane Acrylate SU 500 is a aliphatic urethane diacrylate containing isobornyl acrylate that is designed to provide adhesion, a light color, flexibility, and toughness. Common applications of this product include screen inks, plastic coatings, overprint varnishes, adhesives, and wood flooring. Aliphatic Urethane Acrylate SU 500 is 78% polymer solid by weight with a mPa.s viscosity of 1,200-2,000 at 60℃. 收起 | |
| Aliphatic Urethane Acrylate SU 5039 | Soltech Ltd | Aliphatic Urethane Acrylate SU 5039 is a nona-functional aliphatic urethane acrylate oligomer that is designed to provide a fast curing response, abrasion resistance, stain resistance, hardness, and light color. Common applications of this product include...展開 Aliphatic Urethane Acrylate SU 5039 is a nona-functional aliphatic urethane acrylate oligomer that is designed to provide a fast curing response, abrasion resistance, stain resistance, hardness, and light color. Common applications of this product include plastic coatings, hard coatings, clear coatings, vinyl flooring, and inks, . Aliphatic Urethane Acrylate SU 5039 is 85% polymer solid by weight with a mPa.s viscosity of 5,000-9,000 at 60℃. 收起 | |
| Aliphatic Urethane Acrylate SU 511 | Soltech Ltd | Aliphatic Urethane Acrylate SU 511 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, toughness, adhesion and a light color. Common applications of this product include plastic coatings, wood flooring, light st...展開 Aliphatic Urethane Acrylate SU 511 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, toughness, adhesion and a light color. Common applications of this product include plastic coatings, wood flooring, light stable coatings, overprint varnishes, and screen inks, . Aliphatic Urethane Acrylate SU 511 is 100% polymer solid by weight with a mPa.s viscosity of 14,000-20,000 at 60℃. 收起 | |
| Aliphatic Urethane Acrylate SU 512 | Soltech Ltd | Aliphatic Urethane Acrylate SU 512 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, toughness, adhesion and a light color. Common applications of this product include pigment coatings for wood, metal coatings...展開 Aliphatic Urethane Acrylate SU 512 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, toughness, adhesion and a light color. Common applications of this product include pigment coatings for wood, metal coatings, plastic coatings, and ink. Aliphatic Urethane Acrylate SU 512 is 85% polymer solid by weight with a mPa.s viscosity of 3,000-5,000 at 60℃. 收起 | |
| Aliphatic Urethane Acrylate SU 514 | Soltech Ltd | Aliphatic Urethane Acrylate SU 514 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, toughness, adhesion, abrasion resistance, and scratch resistance. Common applications of this product include screen inks, p...展開 Aliphatic Urethane Acrylate SU 514 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, toughness, adhesion, abrasion resistance, and scratch resistance. Common applications of this product include screen inks, plastic coatings, light stable coatings, and overprint varnishes. Aliphatic Urethane Acrylate SU 514 is 90% polymer solid by weight with a mPa.s viscosity of 7,000-10,000 at 60℃. 收起 | |
| Aliphatic Urethane Acrylate SU 519 | Soltech Ltd | Aliphatic Urethane Acrylate SU 519 is an acrylated aliphatic urethane oligomer diluted with 30% of hydroxy propyl methacrylate that is designed to provide flexibility and heat resistance, Common applications of this product include marking inks, plastic a...展開 Aliphatic Urethane Acrylate SU 519 is an acrylated aliphatic urethane oligomer diluted with 30% of hydroxy propyl methacrylate that is designed to provide flexibility and heat resistance, Common applications of this product include marking inks, plastic adhesives, thick film casting, plastic coatings, clear coatings, and overprint varnishes. Aliphatic Urethane Acrylate SU 519 is 70% polymer solid by weight with an mPa.s viscosity of 12,000-18,000 at 25℃. 收起 | |
| Aliphatic Urethane Acrylate SU 520 | Soltech Ltd | Aliphatic Urethane Acrylate SU 520 is a deca-functional aliphatic urethane acrylate oligomer that is designed to provide stain resistance, abrasion resistance, hardness, and a fast curing response. This product is commonly used in applications such as pla...展開 Aliphatic Urethane Acrylate SU 520 is a deca-functional aliphatic urethane acrylate oligomer that is designed to provide stain resistance, abrasion resistance, hardness, and a fast curing response. This product is commonly used in applications such as plastic coatings, inks, clear coatings, vinyl flooring, and hard film coatings. Aliphatic Urethane Acrylate SU 520 is 100% polymer solid by weight with an mPa.s viscosity of 2,500-3,500 at 60℃. 收起 | |
| Aliphatic Urethane Acrylate SU 5270 | Soltech Ltd | Aliphatic Urethane Acrylate SU 5270 is a di-functional aliphatic urethane acrylate oligomer designed to provide flexibility, adhesion, toughness, and abrasion resistance. Common applications of this product include metal coatings, plastic coatings, pigmen...展開 Aliphatic Urethane Acrylate SU 5270 is a di-functional aliphatic urethane acrylate oligomer designed to provide flexibility, adhesion, toughness, and abrasion resistance. Common applications of this product include metal coatings, plastic coatings, pigment coatings for wood, and screen inks. Aliphatic Urethane Acrylate SU 5270 is 100% polymer solid by weight with an mPa.s viscosity of 7,000-11,000 at 25℃. 收起 | |
| Aliphatic Urethane Acrylate SU 530 | Soltech Ltd | Aliphatic Urethane Acrylate SU 530 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, low viscosity, and light color. Common applications of this product include laminating adhesives, screen inks, glass pigment...展開 Aliphatic Urethane Acrylate SU 530 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, low viscosity, and light color. Common applications of this product include laminating adhesives, screen inks, glass pigment coatings, and lithographic inks. Aliphatic Urethane Acrylate SU 530 is 100% polymer solid by weight with a mPs.s viscosity of 35,000-55,000 at 25℃. 收起 | |
| Aliphatic Urethane Acrylate SU 5347 | Soltech Ltd | Aliphatic Urethane Acrylate SU 5347 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, adhesion, low viscosity, and light color. Common applications of this product include laminating adhesives, screen inks, gl...展開 Aliphatic Urethane Acrylate SU 5347 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, adhesion, low viscosity, and light color. Common applications of this product include laminating adhesives, screen inks, glass pigment coatings, and lithographic inks. Aliphatic Urethane Acrylate SU 5347 is 100% polymer solid by weight with a mPs.s viscosity of 600-1,200 at 25℃. 收起 | |
| Aliphatic Urethane Acrylate SU 542 | Soltech Ltd | Aliphatic Urethane Acrylate SU 542 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, adhesion, durability, and abrasion resistance. Common applications of this product include metal coatings, plastic coatings,...展開 Aliphatic Urethane Acrylate SU 542 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, adhesion, durability, and abrasion resistance. Common applications of this product include metal coatings, plastic coatings, screen ink, pigment coatings, and clear coatings for cork. Aliphatic Urethane Acrylate SU 542 is 100% polymer solid by weight with a mPs.s viscosity of 500-1,000 at 60℃. 收起 | |
| Aliphatic Urethane Acrylate SU 543 | Soltech Ltd | Aliphatic Urethane Acrylate SU 543 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, adhesion, duability, and abrasion resistance. Common applications of this product include metal coatings, plastic coatings, ...展開 Aliphatic Urethane Acrylate SU 543 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, adhesion, duability, and abrasion resistance. Common applications of this product include metal coatings, plastic coatings, screen ink, pigment coatings, and clear coatings for cork. Aliphatic Urethane Acrylate SU 543 is 100% polymer solid by weight with a mPs.s viscosity of 100-300 at 60℃. 收起 | |
| Aliphatic Urethane Acrylate SU 564 | Soltech Ltd | Aliphatic Urethane Acrylate SU 564 is a a trifunctional aliphatic urethane acrylate oligomer designed to provide flexibility, light color, abrasion, and stain resistance. Common applications of this product include light stable coatings, overprint varnish...展開 Aliphatic Urethane Acrylate SU 564 is a a trifunctional aliphatic urethane acrylate oligomer designed to provide flexibility, light color, abrasion, and stain resistance. Common applications of this product include light stable coatings, overprint varnishes, screen inks, plastic coatings, and wood flooring. Aliphatic Urethane Acrylate SU 564 is 85% polymer solid by weight with a mPa.s viscosity of 37,500-52,000 at 25℃. 收起 | |
| Aliphatic Urethane Acrylate SU 565 | Soltech Ltd | Aliphatic Urethane Acrylate SU 565 is a trifunctional aliphatic urethane acrylate oligomer that is designed to provide stain resistance, abrasion, fast curing, and light color. This product is commonly used in applications such as plastic coatings, light ...展開 Aliphatic Urethane Acrylate SU 565 is a trifunctional aliphatic urethane acrylate oligomer that is designed to provide stain resistance, abrasion, fast curing, and light color. This product is commonly used in applications such as plastic coatings, light stable coatings, overprint varnishes, wood flooring and screen inks. Aliphatic Urethane Acrylate SU 565 is 75% polymer solid by weight with an m.PA.s viscosity of 30,000-40,000 at 25℃. 收起 | |
| Aliphatic Urethane Acrylate SU 570 | Soltech Ltd | Aliphatic Urethane Acrylate SU 570 is a di-functional aliphatic urethane acrylate oligomer designed to provide flexibility, toughness, low viscosity, and a light color/odor. This product is commonly used in applications such as plastic coatings, screen in...展開 Aliphatic Urethane Acrylate SU 570 is a di-functional aliphatic urethane acrylate oligomer designed to provide flexibility, toughness, low viscosity, and a light color/odor. This product is commonly used in applications such as plastic coatings, screen inks, light stable coatings, overprint varnishes, and wood flooring. Aliphatic Urethane Acrylate SU 570 is 100% polymer solid by weight with an mPa.s viscosity of 3,000-4,000 at 60℃. 收起 | |
| Aliphatic Urethane Acrylate SU 574 | Soltech Ltd | Aliphatic Urethane Acrylate SU 574 is a tri-functional aliphatic urethane acrylate oligomer designed to provide abrasion resistance, stain resistance, flexibility, toughness, light color, and good surface curing. This product is commonly used in applicati...展開 Aliphatic Urethane Acrylate SU 574 is a tri-functional aliphatic urethane acrylate oligomer designed to provide abrasion resistance, stain resistance, flexibility, toughness, light color, and good surface curing. This product is commonly used in applications such as wood flooring, light stable coatings, plastic coatings, overprint varnishes, and screen inks. Aliphatic Urethane Acrylate SU 574 is 87% polymer solid by weight with an mPa.s viscosity of 1,500-2,500 at 60℃. 收起 | |
| Aliphatic Urethane Acrylate SU 574B | Soltech Ltd | Aliphatic Urethane Acrylate SU 574B is a tri-functional aliphatic urethane acrylate oligomer designed to provide abrasion resistance, stain resistance, flexibility, toughness, light color, and good surface curing. This product is commonly used in applicat...展開 Aliphatic Urethane Acrylate SU 574B is a tri-functional aliphatic urethane acrylate oligomer designed to provide abrasion resistance, stain resistance, flexibility, toughness, light color, and good surface curing. This product is commonly used in applications such as wood flooring, light stable coatings, plastic coatings, overprint varnishes, and screen inks. Aliphatic Urethane Acrylate SU 574B is 86% polymer solid by weight with an mPa.s viscosity of 1,600-2,000 at 60℃. 收起 | |
| Aliphatic Urethane Acrylate SU 580 | Soltech Ltd | Aliphatic Urethane Acrylate SU 580 is a di-functional aliphatic urethane acrylate oligomer designed to provide durability, flexibility, toughness, low odor, and light color. This product is commonly used in applications such as pigment coatings for wood, ...展開 Aliphatic Urethane Acrylate SU 580 is a di-functional aliphatic urethane acrylate oligomer designed to provide durability, flexibility, toughness, low odor, and light color. This product is commonly used in applications such as pigment coatings for wood, adhesives for glass, metal coatings, plastic coatings, and screen ink binders. Aliphatic Urethane Acrylate SU 580 is 100% polymer solid by weight with an mPa.s viscosity of 13,000-19,000 at 60℃. 收起 | |
| Aliphatic Urethane Acrylate SU 588 | Soltech Ltd | Aliphatic Urethane Acrylate SU 588 is an aliphatic urethane triacrylate oligomer diluted with approximately 10% of ethoxy-ethoxyethyl acrylate that is designed to provide flexibility, toughness, low odor, fast curing, and light color. This product is comm...展開 Aliphatic Urethane Acrylate SU 588 is an aliphatic urethane triacrylate oligomer diluted with approximately 10% of ethoxy-ethoxyethyl acrylate that is designed to provide flexibility, toughness, low odor, fast curing, and light color. This product is commonly used in applications such as wood top coats, coatings for rigid and flexible plastic, floor tile coatings, and screen print inks. Aliphatic Urethane Acrylate SU 588 is 90% polymer solid by weight with an mPa.s viscosity of 8,000-12,000 at 65℃. 收起 | |
| Alkylsulfonic Acid Ester of Phenol Plasticizer | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC. | |
| Amine Synergist SZ 115 | Soltech Ltd | Amine Synergist SZ 115 is reactive amine additive used in place of more fugitive amine synergists that is designed to provide increased curing speed, light color, stability, low viscosity and low volatility. Common applications of this product include ove...展開 Amine Synergist SZ 115 is reactive amine additive used in place of more fugitive amine synergists that is designed to provide increased curing speed, light color, stability, low viscosity and low volatility. Common applications of this product include overprint varnishes, silk screen inks, flexo inks, pigment coatings, and wood sealers. Amine Synergist SZ 115 is 100% polymer solid by weight with a viscosity of 15-25 at 25℃. 收起 | |
| Aromatic Urethane Acrylate SU 704 | Soltech Ltd | Aromatic Urethane Acrylate SU 704 is a trifunctional aromatic urethane acrylate oligomer with 25% HDDA that is designed to provide flexibility, light color, low odor, abrasion resistance, and solvent resistance. Common applications of this product include...展開 Aromatic Urethane Acrylate SU 704 is a trifunctional aromatic urethane acrylate oligomer with 25% HDDA that is designed to provide flexibility, light color, low odor, abrasion resistance, and solvent resistance. Common applications of this product include wood coatings, plastic coatings, low gloss coatings, and screen inks. Aromatic Urethane Acrylate SU 704 is 75% polymer solid by weight with a mPa.s viscosity of 10,000-20,000 at 25℃. 收起 | |
| Aromatic Urethane Acrylate SU 710 | Soltech Ltd | Aromatic Urethane Acrylate SU 710 is a difunctional aromatic urethane acrylate oligomer designed to provide flexibility, toughness, solvent resistance, abrasion resistance, and adhesion. Common applications of this product include wood coatings, plastic c...展開 Aromatic Urethane Acrylate SU 710 is a difunctional aromatic urethane acrylate oligomer designed to provide flexibility, toughness, solvent resistance, abrasion resistance, and adhesion. Common applications of this product include wood coatings, plastic coatings, low gloss coatings, and screen inks. Aromatic Urethane Acrylate SU 710 is 100% polymer solid by weight with a mPa.s viscosity of 4,000-6,000 at 60℃. 收起 | |
| Aromatic Urethane Acrylate SU 720 | Soltech Ltd | Aromatic Urethane Acrylate SU 720 is a hexafunctional aromatic urethane acrylate oligomer designed to provide fast curing, light color, solvent resistance, abrasion resistance, hardness, and high gloss. Common applications of this product include wood coa...展開 Aromatic Urethane Acrylate SU 720 is a hexafunctional aromatic urethane acrylate oligomer designed to provide fast curing, light color, solvent resistance, abrasion resistance, hardness, and high gloss. Common applications of this product include wood coatings, wood fillers, scratch resistant plastic coatings, and lithographic inks. Aromatic Urethane Acrylate SU 720 is 100% polymer solid by weight with a mPa.s viscosity of 20,000-40,000 at 60℃. 收起 | |
| Aromatic Urethane Acrylate SU 7206 | Soltech Ltd | Aromatic Urethane Acrylate SU 7206 is a trifunctional aromatic urethane acrylate oligomer diluted with trimethylol-propane triacrylate that is designed to provide fast curing, solvent resistance, abrasion resistance, and flexibility. Common applications o...展開 Aromatic Urethane Acrylate SU 7206 is a trifunctional aromatic urethane acrylate oligomer diluted with trimethylol-propane triacrylate that is designed to provide fast curing, solvent resistance, abrasion resistance, and flexibility. Common applications of this product include wood coatings, plastic coatings, low gloss coatings, and screen inks . Aromatic Urethane Acrylate SU 7206 is 70% polymer solid by weight with a mPa.s viscosity of 62,000-82,000 at 25℃. 收起 | |
| Cardanol | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...展開 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. 收起 | |
| Epoxy Acrylate SE 120 | Soltech Ltd | Epoxy Acrylate SE 120 is a difunctional epoxy acrylate oligomer designed to provide chemical resistance, water resistance, high closs, light color, and a fast cure response. This product is commonly used in applications such as overprint varnishes, lamina...展開 Epoxy Acrylate SE 120 is a difunctional epoxy acrylate oligomer designed to provide chemical resistance, water resistance, high closs, light color, and a fast cure response. This product is commonly used in applications such as overprint varnishes, laminating adhesives, wood sealers, screen inks, lithographic inks, and fast cure coatings. Epoxy Acrylate SE 120 is 100% polymer solid by weight with a viscosity of 2,000-4,000 at 60℃. 收起 | |
| Epoxy Acrylate SE 140 | Soltech Ltd | Epoxy Acrylate SE 140 is a difunctional epoxy acrylate oligomer designed to provide chemical resistance, water resistance, high closs, light color, and a fast cure response. This product is commonly used in applications such as overprint varnishes, lamina...展開 Epoxy Acrylate SE 140 is a difunctional epoxy acrylate oligomer designed to provide chemical resistance, water resistance, high closs, light color, and a fast cure response. This product is commonly used in applications such as overprint varnishes, laminating adhesives, wood sealers, screen inks, and low odor coatings. Epoxy Acrylate SE 140 is 70% polymer solid by weight with a viscosity of 20,000-30,000 at 25℃. 收起 | |
| Epoxy Acrylate SE 146 | Soltech Ltd | Epoxy Acrylate SE 146 is a difunctional epoxy acrylate oligomer with 25% TPGDA that is designed to provide chemical resistance, water resistance, low viscosity, high gloss, light color, and a fast curing response. This product is commonly used in applicat...展開 Epoxy Acrylate SE 146 is a difunctional epoxy acrylate oligomer with 25% TPGDA that is designed to provide chemical resistance, water resistance, low viscosity, high gloss, light color, and a fast curing response. This product is commonly used in applications such as fast cure coatings, laminating adhesives, overprint varnishes, lithographic inks, screen inks, and wood sealers. Epoxy Acrylate SE 146 is 75% polymer solid by weight with a viscosity of 8,000-14,000 at 25℃. 收起 | |
| Epoxy Acrylate SE 147 | Soltech Ltd | Epoxy Acrylate SE 147 is an difunctional epoxy acrylate oligomer with 20% HDDA that is designed to provide chemical resistance, water resistance, low viscosity, high gloss, and a fast curing response. This product is commonly used in applications such as ...展開 Epoxy Acrylate SE 147 is an difunctional epoxy acrylate oligomer with 20% HDDA that is designed to provide chemical resistance, water resistance, low viscosity, high gloss, and a fast curing response. This product is commonly used in applications such as fast cure coatings, laminating adhesives, overprint varnishes, lithographic inks, screen inks, and wood sealers. Epoxy Acrylate SE 147 is 80% polymer solid by weight with a viscosity of 6,500-10,500 at 25℃. 收起 | |
| Epoxy Acrylate SE 148 | Soltech Ltd | Epoxy Acrylate SE 148 is an difunctional epoxy acrylate oligomer with 20% TMPTA that is designed to provide solvent resistance, low viscosity, high gloss, and a fast curing response. This product is commonly used in applications such as fast cure coatings...展開 Epoxy Acrylate SE 148 is an difunctional epoxy acrylate oligomer with 20% TMPTA that is designed to provide solvent resistance, low viscosity, high gloss, and a fast curing response. This product is commonly used in applications such as fast cure coatings, laminating adhesives, overprint varnishes, lithographic inks, screen inks, and wood sealers. Epoxy Acrylate SE 148 is 80% polymer solid by weight with a viscosity of 6,500-10,500 at 25℃. 收起 | |
| Epoxy Acrylate SE 1500 | Soltech Ltd | Epoxy Acrylate SE 1500 is an low viscosity version of SE 1701 epoxy acrylate oligomer that is designed to provide solvent resistance, low viscosity, flexibility, and abrasion resistance. This product is commonly used in applications such as lithographic i...展開 Epoxy Acrylate SE 1500 is an low viscosity version of SE 1701 epoxy acrylate oligomer that is designed to provide solvent resistance, low viscosity, flexibility, and abrasion resistance. This product is commonly used in applications such as lithographic inks, screen inks, clear coatings for paper, top coats for wood, and overprint finishes. Epoxy Acrylate SE 1500 is 100% polymer solid by weight with a viscosity of 900-1,500 at 60℃. 收起 | |
| Epoxy Acrylate SE 1605 | Soltech Ltd | Epoxy Acrylate SE 1605 is a partially acrylated ester of a bisphenol A type epoxy resin that contains both acrylate and epoxy properties that is designed to provide solvent resistance, high gloss, flexibility, and a good curing response. This product is c...展開 Epoxy Acrylate SE 1605 is a partially acrylated ester of a bisphenol A type epoxy resin that contains both acrylate and epoxy properties that is designed to provide solvent resistance, high gloss, flexibility, and a good curing response. This product is commonly used in applications such as metal substrate inks, metal substrate coatings, and 2 component curing systems, Epoxy Acrylate SE 1605 is 100% polymer solid by weight with a viscosity of 800-1,200 at 60℃. 收起 | |
| Epoxy Acrylate SE 1636 | Soltech Ltd | Epoxy Acrylate SE 1636 is a high functionality novolac epoxy acrylate oligomer with 50% TMPTA that designed to provide heat resistance, chemical resistance, fast curing, adhesion, and hardness. This product is commonly used in marking inks. Epoxy Acrylate...展開 Epoxy Acrylate SE 1636 is a high functionality novolac epoxy acrylate oligomer with 50% TMPTA that designed to provide heat resistance, chemical resistance, fast curing, adhesion, and hardness. This product is commonly used in marking inks. Epoxy Acrylate SE 1636 is 50% polymer solid by weight with a viscosity of 35,000-55,000 at 25℃. 收起 | |
| Epoxy Acrylate SE 1700 | Soltech Ltd | Epoxy Acrylate SE 1700 is a hdiacrylate ester of bisphenol A epoxy acrylate oligomer designed to provide water resistance, chemical resistance, surface hardness, high gloss, and a fast curing response. This product is commonly used in applications such as...展開 Epoxy Acrylate SE 1700 is a hdiacrylate ester of bisphenol A epoxy acrylate oligomer designed to provide water resistance, chemical resistance, surface hardness, high gloss, and a fast curing response. This product is commonly used in applications such as wood sealers, overprint varnishes, laminating adhesives, screen inks, and lithographic inks. Epoxy Acrylate SE 1700 is 100% polymer solid by weight with a viscosity of 2,000-5,000 at 25℃. 收起 | |
| Epoxy Acrylate SE 1701 | Soltech Ltd | Epoxy Acrylate SE 1701 is a modified bisphenol A epoxy acrylate oligomer designed to provide abrasion resistance, solvent resistance, flexibility, high gloss, and a fast curing response. This product is commonly used in applications such as paper coatings...展開 Epoxy Acrylate SE 1701 is a modified bisphenol A epoxy acrylate oligomer designed to provide abrasion resistance, solvent resistance, flexibility, high gloss, and a fast curing response. This product is commonly used in applications such as paper coatings, overprint varnishes, screen inks, and lithographic inks. Epoxy Acrylate SE 1701 is 100% polymer solid by weight with a viscosity of 6,000-9,000 at 25℃. 收起 | |
| Epoxy Acrylate SE 1702 | Soltech Ltd | Epoxy Acrylate SE 1702 is a bisphenol A epoxy acrylate oligomer which has been modified with fatty acid that is designed to provide flow, leveling, pigment wetting, solvent resistance, water resistance, and high gloss. This product is commonly used in app...展開 Epoxy Acrylate SE 1702 is a bisphenol A epoxy acrylate oligomer which has been modified with fatty acid that is designed to provide flow, leveling, pigment wetting, solvent resistance, water resistance, and high gloss. This product is commonly used in applications such as paper coatings, overprint varnishes, screen inks, and lithographic inks. Epoxy Acrylate SE 1702 is 100% polymer solid by weight with a viscosity of 4,000-6,000 at 60℃. 收起 | |
| Epoxy Acrylate SE 1703 | Soltech Ltd | Epoxy Acrylate SE 1703 is a bisphenol A epoxy acrylate oligomer which has been modified with fatty acid that is designed to provide solvent resistance, abrasion resistance, high gloss, and a fast curing response. This product is commonly used in applicati...展開 Epoxy Acrylate SE 1703 is a bisphenol A epoxy acrylate oligomer which has been modified with fatty acid that is designed to provide solvent resistance, abrasion resistance, high gloss, and a fast curing response. This product is commonly used in applications such as clear paper coatings, clear wood coatings, overprint varnishes, screen inks, and lithographic inks. Epoxy Acrylate SE 1703 is 100% polymer solid by weight with a viscosity of 2,500-4,000 at 60℃. 收起 | |
| Full Acrylate SA 345 | Soltech Ltd | Full Acrylate SA 345 is an acrylic oligomer diluted with 1,6 hexanediol diacrylate and tripropyleneglycol diacrylate monomers that is designed to provide flexibility, intercoat adhesion, and adhesion to substrates. Common applications of this product incl...展開 Full Acrylate SA 345 is an acrylic oligomer diluted with 1,6 hexanediol diacrylate and tripropyleneglycol diacrylate monomers that is designed to provide flexibility, intercoat adhesion, and adhesion to substrates. Common applications of this product include plastic coatings and plastic screen inks. Full Acrylate SA 345 is 54% polymer solid by weight with a viscosity of 18,000-28,000 at 25℃. 收起 | |
| Fumed Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....展開 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 收起 | |
| Hydroxypropyl Aistarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive. | |
| Methyltriethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silico...展開 Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silicone resins and silicone rubber,silicone resins and silicone rubber. 收起 | |
| Methyltrimethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainl...展開 Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainly used as the crosslinking agent of room temperature vulcanized silicone rubber, as well as the glass fiber surface treatment agent and reinforced plastic laminate treatment agent, in order to improve the mechanical strength of products, heat resistance, moisture resistance. 收起 | |
| Modified Starch - Compound Active Printing Paste | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological pro...展開 Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Modified Starch - High End | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holdi...展開 Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. 收起 | |
| Modified Starch - Mid Range | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, ...展開 Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Nano Silver Powder TFNP-30 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Nano Silver Powder TFNP-30 is a moderate tap density,high dispersion, spherical nanometer silver powder. TFNP-30 is ideal for low-temperature sintering paste, low silver content and high conductive paste, and touchscreen slurry. | |
| Nano Silver Powder TFNP-80 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Nano Silver Powder TFNP-80 is a moderate tap density, nanoscale spherical monodisperse silver. It is mainly used as an additive material. | |
| ND-22 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | ND-22 is used as cross-linking agent for RTV Silicone Rubber and reinforcing for epoxy fiber glass reinforced plastics, viscosity increaser for synthetic resin and raw stuff fabric racked agent. | |
| Polyester Actylate SP 220 | Soltech Ltd | Polyester Actylate SP 220 is a modified polyester resin diluted with 40% of tripropyleneglycol diacrylate that is designed to provide adhesion on glass and plastics, light color, and adhesion between substrates. Common applications of this product include...展開 Polyester Actylate SP 220 is a modified polyester resin diluted with 40% of tripropyleneglycol diacrylate that is designed to provide adhesion on glass and plastics, light color, and adhesion between substrates. Common applications of this product include overprint varnish, post formable inks, wet litho inks, and primer coatings for metal. Polyester Actylate SP 220 is 60% polymer solid by weight with a viscosity of 30,000-50,000 at 25℃. 收起 | |
| Polyester Actylate SP 224 | Soltech Ltd | Polyester Actylate SP 224 is an acid modified polyester acrylate oligomer that is designed to provide adhesion on glass and plastics, light color, and inter-coat adhesion. Common applications of this product include primers for metal, laminating adhesives...展開 Polyester Actylate SP 224 is an acid modified polyester acrylate oligomer that is designed to provide adhesion on glass and plastics, light color, and inter-coat adhesion. Common applications of this product include primers for metal, laminating adhesives, and screen inks. Polyester Actylate SP 224 is 70% polymer solid by weight with a viscosity of 50,000-100,000 at 25℃. 收起 | |
| Polyester Actylate SP 236 | Soltech Ltd | Polyester Actylate SP 236 is a chlorinated polyester acrylate oligomer with TMPTA designed to provide adhesion on metal and paper, wet lithographic behavior, and pigment wetting. Common applications of this product include wet lithographic inks and adhesi...展開 Polyester Actylate SP 236 is a chlorinated polyester acrylate oligomer with TMPTA designed to provide adhesion on metal and paper, wet lithographic behavior, and pigment wetting. Common applications of this product include wet lithographic inks and adhesion promoting coatings. Polyester Actylate SP 236 is 60% polymer solid by weight with a viscosity of 2,400-2,800 at 25℃. 收起 | |
| Polyester Actylate SP 236L | Soltech Ltd | Polyester Actylate SP 236L is a chlorinated polyester acrylate oligomer with TMPTA designed to provide adhesion on metal and paper, wet lithographic behavior, and pigment wetting. Common applications of this product include wet lithographic inks and adhes...展開 Polyester Actylate SP 236L is a chlorinated polyester acrylate oligomer with TMPTA designed to provide adhesion on metal and paper, wet lithographic behavior, and pigment wetting. Common applications of this product include wet lithographic inks and adhesion promoting coatings. Polyester Actylate SP 236L is 60% polymer solid by weight with a viscosity of 1,200-1,800 at 25℃. 收起 | |
| Polyester Actylate SP 238 | Soltech Ltd | Polyester Actylate SP 238 is a chlorinated polyester acrylate oligomer with GPTA designed to provide adhesion on metal and paper, wet lithographic behavior, and pigment wetting. Common applications of this product include wet lithographic inks and adhesio...展開 Polyester Actylate SP 238 is a chlorinated polyester acrylate oligomer with GPTA designed to provide adhesion on metal and paper, wet lithographic behavior, and pigment wetting. Common applications of this product include wet lithographic inks and adhesion promoting coatings. Polyester Actylate SP 238 is 60% polymer solid by weight with a viscosity of 1,200-1,800 at 25℃. 收起 | |
| Polyester Actylate SP 260 | Soltech Ltd | Polyester Actylate SP 260 is a multifunctional polyester acrylate oligomer with 5% TMPTA that is designed to provide compatibility and heat resistance. Common applications of this product include wet lithographic inks, wet lithographic coatings, and top c...展開 Polyester Actylate SP 260 is a multifunctional polyester acrylate oligomer with 5% TMPTA that is designed to provide compatibility and heat resistance. Common applications of this product include wet lithographic inks, wet lithographic coatings, and top coatings for vacuum metalizing. Polyester Actylate SP 260 is 95% polymer solid by weight with a viscosity of 6,000-14,000 at 25℃. 收起 | |
| Polyester Actylate SP 280 | Soltech Ltd | Polyester Actylate SP 280 is a low viscosity multi-functional polyester acrylate oligomer designed to provide light color, high gloss, fast curing, pigment wetting, and low odor. Common applications of this product include high gloss coatings, Polyester A...展開 Polyester Actylate SP 280 is a low viscosity multi-functional polyester acrylate oligomer designed to provide light color, high gloss, fast curing, pigment wetting, and low odor. Common applications of this product include high gloss coatings, Polyester Actylate SP 280 is 100% polymer solid by weight with a viscosity of 2,500-3,500 at 25℃. 收起 | |
| Polyester Actylate SP 281 | Soltech Ltd | Polyester Actylate SP 281 is a low viscosity amino modified multi-functional polyester acrylate oligomer designed to provide light color, high gloss, low viscosity, and fast curing. Common applications of this product include clear coatings, high gloss co...展開 Polyester Actylate SP 281 is a low viscosity amino modified multi-functional polyester acrylate oligomer designed to provide light color, high gloss, low viscosity, and fast curing. Common applications of this product include clear coatings, high gloss coatings, top coatings for wood, flexographic inks, and screen inks, Polyester Actylate SP 281 is 100% polymer solid by weight with a viscosity of 80-120 at 25℃. 收起 | |
| Polyester Actylate SP 283 | Soltech Ltd | Polyester Actylate SP 283 is an amino modified multi-functional polyester acrylate oligomer designed to provide light color, high gloss, low viscosity, and fast curing, and low residual odor. Common applications of this product include clear coatings, hig...展開 Polyester Actylate SP 283 is an amino modified multi-functional polyester acrylate oligomer designed to provide light color, high gloss, low viscosity, and fast curing, and low residual odor. Common applications of this product include clear coatings, high gloss coatings, top coatings for wood, flexographic inks, and screen inks, Polyester Actylate SP 283 is 100% polymer solid by weight with a viscosity of 1,000-2,000 at 25℃. 收起 | |
| Precipitated Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixi...展開 Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixing solutions of sodium silicate with sulfuric acid in water. A chemical reaction occurs, and pellets of pure silica form. 收起 | |
| PVB | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PV...展開 Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PVB has high transparency, good cold resistance, water resistance, film forming properties and impact resistance, widely used in middle film of glass, ceramic flower paper, metal protective paint, tipping paper, aluminum foil, insulation paint, fiber treatment agent, finished parts, printing inks, dyes and so on. 收起 | |
| PVC Paste | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | PVC Paste is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , go...展開 PVC Paste is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , good electrical insulation , thermoplasticity and membrane forming capacity. They are essential materials for preparing PVC compounds. By adding blending agents and employing different techniques, they can be made into rigid or non-rigid PVC products and are suppliable in a wide range of transparent, translucent, and opaque colours. 收起 | |
| SCA-Y25E | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of t...展開 SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. SCA-Y25E can be used in a number of applications. 收起 | |
| SCA-Y25M | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion o...展開 SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. It can be used in a number of applications. 收起 | |
| Silane ATPN-1100 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to ...展開 Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to substrates. The primary amine function reacts with a wide array of thermoset, thermoplastic, and elastomeric materials. 收起 | |
| Silane ATPN-1110 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion an...展開 Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion and wet ability of filler in the high molecular materials. ATPN-1110 is an excellent promoter of adhesion and sealant (such as polyurethane, epoxy, and phenol). In the glass wool and FRP products, it can be added into phenol resins to improve the wet resistance and mechanical performance. 收起 | |
| Silane ATPN-1120 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of...展開 Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone-polymers or as crosslinker (moisture crosslinking of polymers). The application as“coupling agent”leads in general to an improvement of mechanical and electrical product properties above all under exposure to heat and/or moisture. 收起 | |
| Silane Coupling Agent Si-69 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strengt...展開 Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strength, tearing strength and abrasive resistance and reduce compression set of vulcanizates. In addition, it can reduce the viscosity and improve the processability of rubber products. Si-69 is especially suitable to improve the reinforcing properties of fillers that contain hydroxyl groups in all unsaturated polymers having double bonds or their blends. 收起 | |
| SILICONE FLUID ATPN-100 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICON...展開 SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-100 is ideal for use in a wide range of applications. 收起 | |
| SILICONE FLUID ATPN-1000 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICO...展開 SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-1000 is ideal for use in a wide range of applications. 收起 | |
| UVB2000 Special Tertiary Amine Acrylate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVB2000 Special Tertiary Amine Acrylate is a difunctional amine coinitiator which, when used in conjunction with a photosensitizer such as benzophenone, promotes rapid curing under UV light. Additional benefits include reduced odors, both at press side an...展開 UVB2000 Special Tertiary Amine Acrylate is a difunctional amine coinitiator which, when used in conjunction with a photosensitizer such as benzophenone, promotes rapid curing under UV light. Additional benefits include reduced odors, both at press side and in the cured film, and reduced blooming. It is ideal for use in a wide range of applications. 收起 | |
| UVB2200 Reactive Amine Acrylate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVB2200 Reactive Amine Acrylate is a very low viscosity, highly reactive amine modified polyetheracrylate oligomer for use in UV and EB curing systems. UVB2200 can be used as the sole binder or with monomer diluents. It is ideal for use in a wide range of...展開 UVB2200 Reactive Amine Acrylate is a very low viscosity, highly reactive amine modified polyetheracrylate oligomer for use in UV and EB curing systems. UVB2200 can be used as the sole binder or with monomer diluents. It is ideal for use in a wide range of applications. 收起 | |
| UVE3216 Modified Epoxy Acrylate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVE3216 Modified Epoxy Acrylate is a high molecular weight, acid modified epoxy acrylate. It blended with 10% tripropylene glycol diacrylate. It allows high gloss, fast cure response, higher flexibility and low shrikage. UVE3216 is ideal for use in a wide...展開 UVE3216 Modified Epoxy Acrylate is a high molecular weight, acid modified epoxy acrylate. It blended with 10% tripropylene glycol diacrylate. It allows high gloss, fast cure response, higher flexibility and low shrikage. UVE3216 is ideal for use in a wide range of applications. 收起 | |
| UVU 6451 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVU 6451 is a tetrafunctional aliphatic urethane acrylate oligomer developed for UV/EB-cured coatings and inks. It imparts hardness, very fast cure response, and non-yellowing characteristics to these applications. | |
| UVU6219 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVU6219 is an aliphatic polyester based urethane diacrylate oligomer blended with 20% TPGDA, tripropylene glycol diacrylate. It is a flexible oligomer offering good weatherability, and low skin irritation. UVU6219 is ideal for use in a wide range of appli...展開 UVU6219 is an aliphatic polyester based urethane diacrylate oligomer blended with 20% TPGDA, tripropylene glycol diacrylate. It is a flexible oligomer offering good weatherability, and low skin irritation. UVU6219 is ideal for use in a wide range of applications. 收起 | |
| UVU6305 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVU6305 is a trifunctional aliphatic polyester urethane acrylate oligomer developed for use in UV and EB cured inks and coatings. Weatherability, low viscosity, and fast cure are among the key attributes of UVU6305. It is ideal for use in a wide range of ...展開 UVU6305 is a trifunctional aliphatic polyester urethane acrylate oligomer developed for use in UV and EB cured inks and coatings. Weatherability, low viscosity, and fast cure are among the key attributes of UVU6305. It is ideal for use in a wide range of applications. 收起 | |
| UVU6609 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVU6609 is a hexafunctional aliphatic urethane acrylate oligomer. It offers low viscosity and good abrasion and heat resistance. UVU6609 is ideal for use in a wide range of applications. | |
| UVU6906 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVU6906 is a multifunctional urethane acrylate oligomer that imparts chemical resistance, fast cure response, weatherability, and abrasion resistance to radiation-cure coatings. It is ideal for use in a wide range of applications. |
