| ESTISOL 390 | Esti Chem A/S | ESTISOL 390 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of >350 °C and can reduce or eliminate VOC content in products. ESTISOL 390 can act as a VOC...展開 ESTISOL 390 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of >350 °C and can reduce or eliminate VOC content in products. ESTISOL 390 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. 收起 | |
| Ethylene diamine | BASF SE, Intermediates Division 巴斯夫中间体 | 環氧樹脂交聯劑，聚酰胺和聚氨酯的基礎原料。 乙二胺通常可用於環氧涂料和膠粘劑以及環氧復合材料。此外，它也可用作擴鏈劑用於水性聚氨酯乳液 | |
| Ethylene urea, N,N'-Ethyleneurea, 2-Imidozolidone | BASF SE, Intermediates Division 巴斯夫中间体 | 有效的甲醛清除劑，適用於氨基樹脂，如脲醛樹脂（UF），三聚氰胺-甲醛樹脂（MF）或三聚氰胺脲醛縮合樹脂（MUF） | |
| Formic acid | BASF SE, Intermediates Division 巴斯夫中间体 | 甲酸是一種涂料助劑和中和劑，例如陽離子電沉積油漆。甲酸可用於制備CED樹脂 | |
| Hydroxypivalic acid neopentylglycolester, HPN | BASF SE, Intermediates Division 巴斯夫中间体 | 飽和聚酯、不飽和聚酯和聚氨酯的基礎原料。HPN可用於溶劑型油漆用聚酯(易拉罐和卷材涂料烤漆、汽車涂料、工業用涂料）和雙組分油漆（塑膠涂料、修補涂料）。HPN聚酯很適合用於水性油漆，也適用於粉末涂料用聚酯 | |
| Imidazole | BASF SE, Intermediates Division 巴斯夫中间体 | 環氧反應催化劑，聚異氰酸酯封閉劑。咪唑用於催化環氧樹脂改性和用於雙組分環氧體系。它適合作為封閉劑應用於粉末涂料用聚異氰酸酯 | |
| Iso-Butyl vinyl ether, IBVE | BASF SE, Intermediates Division 巴斯夫中间体 | 乙烯基氯(Laroflex®)或TFCE 1,1,2-三氟-2-氯乙共聚物的單體。乙烯基醚可與缺電子的單體，例如乙烯基氯、馬來酸酐、TFCE，通過電荷轉移絡合聚合形成交替共聚物，可獲得更佳的溶解性和柔韌性 | |
| Isophorone diamine | BASF SE, Intermediates Division 巴斯夫中间体 | 環氧樹脂交聯劑，聚酰胺的基礎原料。 異佛樂酮二胺通常可用於環氧涂料、環氧膠粘劑和環氧復合材料。異佛樂酮二胺可改進環氧樹脂的憎水性，具有較低的成膜時對潮濕的敏感性 | |
| Liquid NVC | BASF SE, Intermediates Division 巴斯夫中间体 | 輻射固化涂料和油墨的活性稀釋劑。它在室溫下是液體，具有高固化速度、出色的降粘特性、出色的基材潤濕性以及增進的附著力 | |
| MTD100 | Guangxi Zhongchang Resin Co., Ltd. | MTD100 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying...展開 MTD100 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 90-100ºC. It can also be applied to coating and printing ink. 收起 | |
| MTD100W | Guangxi Zhongchang Resin Co., Ltd. | MTD100W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifyin...展開 MTD100W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 90-100ºC. It can also be applied to coating and printing ink. 收起 | |
| MTD120 | Guangxi Zhongchang Resin Co., Ltd. | MTD120 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying...展開 MTD120 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 120-130ºC. It can also be applied to coating and printing ink. 收起 | |
| MTD120W | Guangxi Zhongchang Resin Co., Ltd. | MTD120W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifyin...展開 MTD120W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 120-130ºC. It can also be applied to coating and printing ink. 收起 | |
| MTD150 | Guangxi Zhongchang Resin Co., Ltd. | MTD150 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying...展開 MTD150 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 145-160ºC. It can also be applied to coating and printing ink. 收起 | |
| MTD150W | Guangxi Zhongchang Resin Co., Ltd. | MTD150W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifyin...展開 MTD150W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 145-160ºC. It can also be applied to coating and printing ink. 收起 | |
| N-(3-Aminopropyl)-imidazole, Lupragen® API | BASF SE, Intermediates Division 巴斯夫中间体 | 環氧和氨基甲酸酯反應的選擇性催化劑，特殊分段聚合物（如聚氨酯）的基礎原料。 N-(3-氨丙基)-咪唑可用於雙組分環氧體系，用於環氧樹脂改性和制備聚氨酯。當制備氨基甲酸酯或聚脲時，N-(3-氨丙基)-咪唑加入聚合物結構中可增進樹脂的附著力特性 | |
| N-Dodecyl vinyl ether, DDVE | BASF SE, Intermediates Division 巴斯夫中间体 | n-十二烷乙烯基醚共聚物單體，可用作涂料消泡劑、蠟、潤滑劑、顏料助劑、乙烯基均聚物和共聚物（陰離子機理）的原材料。環氧硅烷和丙烯酸硅基離型涂料的活性稀釋劑。n-十二烷乙烯基醚共聚物可作為配方助劑應用於水性和溶劑型涂料配方中 | |
| N-Ethylpyrrolidone, NEP | BASF SE, Intermediates Division 巴斯夫中间体 | 特殊極性溶劑，用於清洗金屬、玻璃和塑膠，用於塑膠前處理，用於聚氨酯乳液和高極性樹脂以及樹脂生產。N-乙基吡咯烷酮可應用於塑膠涂料、水性涂料和電絕緣涂料 | |
| N-Methylethanolamine | BASF SE, Intermediates Division 巴斯夫中间体 | 環氧樹脂改性的基礎原料。甲基乙醇胺改性環氧樹脂適用於陽離子電沉積涂料 | |
| N-Methylpyrrolidone, NMP | BASF SE, Intermediates Division 巴斯夫中间体 | 通用型極性溶劑，適用於清洗金屬、玻璃和塑膠，可用於前處理塑膠，可用於聚氨酯乳液，可用於高極性樹脂和樹脂生產。N-甲基吡咯烷酮可用於塑膠涂料、水性涂料和電絕緣涂料 | |
| N-Octadecyl vinyl ether, ODVE | BASF SE, Intermediates Division 巴斯夫中间体 | n-十八烷乙烯基醚共聚物單體，可用作涂料消泡劑、蠟、潤滑劑、顏料助劑、乙烯基均聚物和共聚物（陽離子機理）的原材料。環氧硅烷和丙烯酸硅基離型涂料的活性稀釋劑。n-十八烷乙烯基醚共聚物可作為配方助劑應用於水性和溶劑型涂料配方中。n-十八烷乙烯基醚可增加聚合物的憎水性以及表面活性行為 | |
| N-Vinyl-Caprolactam, NVC | BASF SE, Intermediates Division 巴斯夫中间体 | UV膠粘劑和UV油墨，尤其是絲網和數字印刷油墨/噴墨印刷油墨的活性稀釋劑。工業UV涂料，尤其是光纖涂料和快速成型的活性稀釋劑。憎水改性的PVP（聚乙烯吡咯烷酮）共用單體，尤其適用於油田、化妝品和膠粘劑 | |
| N-Vinylpyrrolidone, NVP | BASF SE, Intermediates Division 巴斯夫中间体 | UV涂料、UV油墨和UV膠粘劑輻射固化的活性稀釋劑。水溶性聚乙烯吡咯烷酮（PVP）的單體，可用於油田、化妝品和膠粘劑。UV涂料、UV油墨和UV膠粘劑的活性稀釋劑 | |
| Neopentane diamine | BASF SE, Intermediates Division 巴斯夫中间体 | 環氧樹脂交聯劑，聚酰胺的基礎原料。 新戊烷二胺通常可用於環氧涂料以及環氧復合材料和膠粘劑。新戊烷二胺具有高反應活性，易與環氧樹脂混合。由於它的結構，它相比非枝化脂肪族胺對水不太敏感 | |
| N,N'-Bis-(3-aminopropyl)-ethylenediamine, N4-Amine | BASF SE, Intermediates Division 巴斯夫中间体 | 環氧樹脂交聯劑。N,N'-二-(3-氨丙基)-乙二胺可應用於雙組分環氧涂料、環氧基膠粘劑和塑料零件。由於它的高官能度和低當量，N,N'-二-(3-氨丙基)-乙二胺可提供高交聯密度 | |
| N,N-BIS(3-Aminopropyl)-methylamine | BASF SE, Intermediates Division 巴斯夫中间体 | 聚氨酯的潛在基礎原料，環氧樹脂的交聯劑。N,N-雙氨丙基-甲胺適用於環氧涂料和環氧基塑膠零件。它可用於制備陽離子穩定的聚氨酯乳液 | |
| N,N-DI-(2-hydroxyethyl) aniline | BASF SE, Intermediates Division 巴斯夫中间体 | 不飽和聚酯自由基引發聚合的催化劑，環氧反應催化劑 | |
| N,N-Diethylethanol-amine | BASF SE, Intermediates Division 巴斯夫中间体 | 氨基甲酸酯反應催化劑，陰離子穩定的水性樹脂中和劑。N、N-二乙基乙醇胺很適合應用於聚氨酯制備和作為催化劑應用於雙組分油漆。N、N-二乙基乙醇胺也可作為中和劑應用於基於水性聚酯、醇酸、丙烯酸樹脂和聚氨酯的油漆中 | |
| N,N-Diisopropanol-P-toluidine | BASF SE, Intermediates Division 巴斯夫中间体 | 不飽和聚酯自由基引發聚合的催化劑，環氧反應催化劑 | |
| N,N-Dimethylbenzyl-amine Lupragen® N 103 | BASF SE, Intermediates Division 巴斯夫中间体 | 氨基甲酸酯反應、環氧反應的催化劑和不飽和聚酯樹脂自由基引發聚合的共催化劑。N,N-二甲基苄胺可用於改性環氧樹脂。改性的環氧樹脂可用於陽離子電沉積涂料。N,N-二甲基苄胺可作為催化劑用於制備聚氨酯（例如塑料零件） | |
| N,N-Dimethylcyclohexyl-amine Lupragen® N 100 | BASF SE, Intermediates Division 巴斯夫中间体 | 催化劑，用於異氰酸酯反應和聚氨酯樹脂生產 | |
| N,N-Dimethylethanol-amine Lupragen® N 101 | BASF SE, Intermediates Division 巴斯夫中间体 | 氨基甲酸酯反應催化劑，陰離子穩定的水性樹脂中和劑。N,N-二甲基乙醇胺可用於合成聚氨酯和作為催化劑應用於雙組分油漆。N,N-二甲基乙醇胺也可作為中和劑應用於基於水性聚酯、醇酸、丙烯酸樹脂和聚氨酯的油漆中 | |
| NPG, Neol® Neopentylglycol | BASF SE, Intermediates Division 巴斯夫中间体 | 新戊基乙二醇是一種通用的溶劑型涂料用聚酯的基礎原料。它可用於汽車烤漆、易拉罐&卷材涂料和一般工業用涂料。它可用於雙組分塑膠漆和修補漆。新戊基乙二醇可用於汽車涂料、修補涂料和一般工業用涂料用的水性聚酯。它也可用於粉末涂料用聚酯 | |
| Polyetheramine D 2000 | BASF SE, Intermediates Division 巴斯夫中间体 | 環氧樹脂的柔韌性交聯劑，是聚異氰酸酯的基礎原料。Polyetheramine D 2000可用於雙組分（2K）環氧涂料和作為聚脲涂料組分，用於地坪漆、管道和工業建筑。Polyetheramine D 2000可增進柔韌性和耐化學品性能 | |
| Polyetheramine D 230 | BASF SE, Intermediates Division 巴斯夫中间体 | 環氧樹脂的柔韌性交聯劑，是聚異氰酸酯的基礎原料。Polyetheramine D 230可用於雙組分（2K）環氧涂料和作為聚脲涂料、地坪涂料、管道和工業建筑的組分。Polyetheramine D 230可增進柔韌性和耐化學品性能 | |
| Polyetheramine D 400 | BASF SE, Intermediates Division 巴斯夫中间体 | 環氧樹脂的柔韌性交聯劑，是聚異氰酸酯的基礎原料。Polyetheramine D 400可用於雙組分（2K）環氧涂料和作為聚脲涂料組分，用於地坪涂料、管道和工業建筑。Polyetheramine D 400可增進柔韌性和耐化學品性能 | |
| Polyetheramine T 403 | BASF SE, Intermediates Division 巴斯夫中间体 | 環氧樹脂的柔韌性交聯劑，是聚異氰酸酯的基礎原料。Polyetheramine T 403可用於雙組分（2K）環氧涂料和作為聚脲涂料組分，用於地坪涂料、管道和工業建筑。Polyetheramine T 403可增進柔韌性和耐化學品性能 | |
| Polyetheramine T 5000 | BASF SE, Intermediates Division 巴斯夫中间体 | 環氧樹脂的柔韌性交聯劑，是聚異氰酸酯的基礎原料。Polyetheramine T 5000可用於雙組分（2K）環氧涂料和作為聚脲涂料組分，用於地坪涂料、管道和工業建筑。Polyetheramine T 5000可增進柔韌性和耐化學品性能 | |
| Polythf® 1000, 1000 S (Polytetrahydrofurane) polytetramethylene ether glycol | BASF SE, Intermediates Division 巴斯夫中间体 | PolyTHF® 1000 和1000 S是增塑劑和聚氨酯乳液軟質鏈段的基礎原料。含PolyTHF® 1000和1000 S 的聚合物適用於塑膠、鋁箔和皮革涂料。PolyTHF® 1000 和1000 S 可為聚合物分子帶入柔韌性 | |
| Polythf® 1400 (Polytetrahydrofurane) polytetramethylene ether glycol | BASF SE, Intermediates Division 巴斯夫中间体 | PolyTHF® 1400是增塑劑和聚氨酯乳液軟質鏈段的基礎原料。含PolyTHF® 1400 的聚合物適用於塑膠、鋁箔和皮革涂料。PolyTHF® 1400 可為聚合物分子帶入高柔韌性 | |
| Polythf® 1800 (Polytetrahydrofurane) polytetramethylene ether glycol | BASF SE, Intermediates Division 巴斯夫中间体 | PolyTHF® 1800是增塑劑和聚氨酯乳液軟質鏈段的基礎原料。含PolyTHF® 1800 的聚合物適用於塑膠、鋁箔和皮革涂料。PolyTHF® 1800 可為聚合物分子帶入高柔韌性 | |
| PolyTHF® 2000, 2000 S (Polytetrahydrofurane) Polytetramethylene ether glycol | BASF SE, Intermediates Division 巴斯夫中间体 | PolyTHF® 2000 和 2000 S是增塑劑和聚氨酯乳液軟質鏈段的基礎原料。含PolyTHF® 2000 和 2000 S 的聚合物適用於塑膠、鋁箔和皮革涂料。PolyTHF® 1000 and 1000 S 可為聚合物分子帶入高柔韌性 | |
| PolyTHF® 250 techn. (Polytetrahydrofurane) Polytetramethylene ether glycol | BASF SE, Intermediates Division 巴斯夫中间体 | PolyTHF® 250 techn.是增塑劑和聚氨酯乳液軟質鏈段的基礎原料。含PolyTHF® 250 techn. 的聚合物適用於塑膠、鋁箔和皮革涂料。PolyTHF® 250 techn.可為聚合物分子帶入柔韌性 | |
| PolyTHF® 650 S (Polytetrahydrofurane) Polytetramethylene ether glycol | BASF SE, Intermediates Division 巴斯夫中间体 | PolyTHF® 650 S是增塑劑和聚氨酯乳液軟質鏈段的基礎原料。含PolyTHF® 650 S的聚合物適用於塑膠、鋁箔和皮革涂料。PolyTHF® 650 S可為聚合物分子帶入柔韌性 | |
| Propylene carbonate | BASF SE, Intermediates Division 巴斯夫中间体 | 極性樹脂，例如聚酯、聚氨酯、聚酯酰亞胺和增塑劑用溶劑。碳酸丙二酯適用於基於聚酯、聚氨酯、聚酯酰亞胺、環氧和酚樹脂的電線漆。碳酸丙二酯是一種高極性的溶劑。是改性版本，Solvarnol® PCA在電絕緣配方中可取代苯酚、甲酚和二甲苯酚 | |
| Propylene Glycol Monomethyl Ether Acetate (PMA) | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Propylene Glycol Monomethyl Ether Acetate (PMA) is a senior solvent. Because of its molecular structure, it is able to dissolve both polar and non-polar substance. This product is highly recommended for coatings and printing inks, and is also suitable for...展開 Propylene Glycol Monomethyl Ether Acetate (PMA) is a senior solvent. Because of its molecular structure, it is able to dissolve both polar and non-polar substance. This product is highly recommended for coatings and printing inks, and is also suitable for unsaturated polyester, epoxy resins, polyurethane resins, and acrylic resins. 收起 | |
| Propylene Glycol Monomethyl Ether (PM) | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Propylene Glycol Monomethyl Ether (PM) is a solvent for nitrocellulose, alkyd resins, and anhydride-modified phenolic resins. It is also used as an additive for antifreeze and brake fluid. This product has excellent dissolving performance, and has appropr...展開 Propylene Glycol Monomethyl Ether (PM) is a solvent for nitrocellulose, alkyd resins, and anhydride-modified phenolic resins. It is also used as an additive for antifreeze and brake fluid. This product has excellent dissolving performance, and has appropriate volatility and reactivity characteristics for a wide range of applications. 收起 | |
| RA100 | Guangxi Zhongchang Resin Co., Ltd. | RA100 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...展開 RA100 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 100ºC and an acid number less than or equal to 190 mgKOH/g. 收起 | |
| RA100W | Guangxi Zhongchang Resin Co., Ltd. | RA100W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesi...展開 RA100W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 100ºC and an acid number less than or equal to 190 mgKOH/g. 收起 | |
| RA120 | Guangxi Zhongchang Resin Co., Ltd. | RA120 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...展開 RA120 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 120ºC and an acid number less than or equal to 210 mgKOH/g. 收起 | |
| RA120W | Guangxi Zhongchang Resin Co., Ltd. | RA120W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesi...展開 RA120W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 120ºC and an acid number less than or equal to 210 mgKOH/g. 收起 | |
| RA140 | Guangxi Zhongchang Resin Co., Ltd. | RA140 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...展開 RA140 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 140ºC and an acid number less than or equal to 145 mgKOH/g. 收起 | |
| RA140W | Guangxi Zhongchang Resin Co., Ltd. | RA140W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesi...展開 RA140W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 140ºC and an acid number less than or equal to 145 mgKOH/g. 收起 | |
| RA90 | Guangxi Zhongchang Resin Co., Ltd. | RA90 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive...展開 RA90 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 90ºC and an acid number less than or equal to 180 mgKOH/g. 收起 | |
| RA90W | Guangxi Zhongchang Resin Co., Ltd. | RA90W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...展開 RA90W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 90ºC and an acid number less than or equal to 180 mgKOH/g. 收起 | |
| RGM128 | Guangxi Zhongchang Resin Co., Ltd. | RGM128 is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters i...展開 RGM128 is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters in lithographic inks and varnishes in addition to pigment wetting for use in economical flushing varnishes for heatset and sheetfed flushes. It contains a softening point between 125-131ºC. 收起 | |
| RGM128W | Guangxi Zhongchang Resin Co., Ltd. | RGM128W is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters ...展開 RGM128W is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters in lithographic inks and varnishes in addition to pigment wetting for use in economical flushing varnishes for heatset and sheetfed flushes. It contains a softening point between 125-131ºC. 收起 | |
| RGM135 | Guangxi Zhongchang Resin Co., Ltd. | RGM135 is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters i...展開 RGM135 is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters in lithographic inks and varnishes in addition to pigment wetting for use in economical flushing varnishes for heatset and sheetfed flushes. It contains a softening point between 131-138ºC. 收起 | |
| RGM135W | Guangxi Zhongchang Resin Co., Ltd. | RGM135W is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters ...展開 RGM135W is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters in lithographic inks and varnishes in addition to pigment wetting for use in economical flushing varnishes for heatset and sheetfed flushes. It contains a softening point between 131-138ºC. 收起 | |
| Rosin Modified Phenolic Resin - 2112 | Guangxi Zhongchang Resin Co., Ltd. | Rosin Modified Phenolic Resin - 2112 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than or equal to 135ºC and an acid number less than or equal to 20. It ...展開 Rosin Modified Phenolic Resin - 2112 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than or equal to 135ºC and an acid number less than or equal to 20. It is soluble in hydrocarbon, aroma, ester, ketone, benzine, benzene, ethyl benzine, spirit and turpentine for use in paint, printing ink and adhesives. 收起 | |
| Rosin Modified Phenolic Resin - 2116 | Guangxi Zhongchang Resin Co., Ltd. | Rosin Modified Phenolic Resin - 2116 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 151ºC and an acid number less than or equal to 18. It is soluble i...展開 Rosin Modified Phenolic Resin - 2116 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 151ºC and an acid number less than or equal to 18. It is soluble in hydrocarbon, aroma, ester, ketone, benzine, benzene, ethyl benzine, spirit and turpentine for use in paint, printing ink and adhesives. 收起 | |
| Rosin Modified Phenolic Resin - 2118 | Guangxi Zhongchang Resin Co., Ltd. | Rosin Modified Phenolic Resin - 2118 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 157ºC and an acid number less than or equal to 20. It is soluble i...展開 Rosin Modified Phenolic Resin - 2118 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 157ºC and an acid number less than or equal to 20. It is soluble in hydrocarbon, aroma, ester, ketone, benzine, benzene, ethyl benzine, spirit and turpentine for use in paint, printing ink and adhesives. 收起 | |
| RPF100 | Guangxi Zhongchang Resin Co., Ltd. | RPF100 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low ...展開 RPF100 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. 收起 | |
| RPF100A | Guangxi Zhongchang Resin Co., Ltd. | RPF100A is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 30 mgKOH/g. It provides dissolvability in low...展開 RPF100A is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 30 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. 收起 | |
| RPF100B | Guangxi Zhongchang Resin Co., Ltd. | RPF100B is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than five and an acid number less than or equal to 40 mgKOH/g. It provides dissolvability in low...展開 RPF100B is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than five and an acid number less than or equal to 40 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. 收起 | |
| RPF100W | Guangxi Zhongchang Resin Co., Ltd. | RPF100W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low ...展開 RPF100W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. 收起 | |
| RPF90 | Guangxi Zhongchang Resin Co., Ltd. | RPF90 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low ca...展開 RPF90 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. 收起 | |
| RPF90W | Guangxi Zhongchang Resin Co., Ltd. | RPF90W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low ca...展開 RPF90W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. 收起 | |
| tert.-Amyl alcohol | BASF SE, Intermediates Division 巴斯夫中间体 | 涂料的特殊溶劑。叔戊醇適合雙組分聚氨酯涂料（汽車修補漆、塑膠涂料）。它可增加雙組分涂料的開罐使用時間 | |
| tert.-Butylvinylether, t-BVE | BASF SE, Intermediates Division 巴斯夫中间体 | 乙烯基氯共聚物的單體。聚合物中的T-丁基乙烯基基團可輕易地轉移為羥基官能團（保護基團） | |
| Texicryl® 13-503 | Scott Bader | Texicryl® 13-503 is designed for printing inks and non absorbent, low energy substrates, gives excellent wet rub performance. | |
| Texicryl® 13-525 | Scott Bader | Texicryl® 13-525 is for high quality blister packaging applications with superb seal integrity. High gloss, good levelling, low blocking. Modifier for natural rubber latex in cold seal applications. | |
| Texicryl® 13-526 | Scott Bader | Texicryl® 13-526 is a high performance styrene acrylic copolymer designed for use in cold seal adhesives. Excellent early water resistance. | |
| Texicryl® 13-527 | Scott Bader | Texicryl® 13-527 is a cold seal adhesive binder with high pigment binding properties. Can be used in combination with Texicryl® 13-528 to achieve desired properties. | |
| Texicryl® 13-528 | Scott Bader | Texicryl® 13-528 is a soft styrene acrylic copolymer which can be used to modify the adhesion characteristics of latex based adhesives. | |
| Texicryl® 13-809 | Scott Bader | Texicryl® 13-809 is a hard emulsion for high gloss, fast drying coatings, OPV’s and inks. Can be used as deblocking modifier. | |
| Texicryl® 13-812 | Scott Bader | Texicryl® 13-812 is a high efficiency alkali soluble binder for flexographic printing of cartons and paper sacks. | |
| Texicryl® 13-813 | Scott Bader | Texicryl® 13-813 is a low odour, soft polymer with superior gloss and holdout for use in verprint varnishes. Heat sealable. | |
| Texicryl® 13-814 | Scott Bader | Texicryl® 13-814 is a soft polymer with excellent water barrier properties for OPV’s and inks. Heat sealable. Very low Cobb value. Low slip coefficient. | |
| Texicryl® 13-819 | Scott Bader | Texicryl® 13-819 is an emulsion vehicle with unique plasticiser technology. Good heat/blocking resistance, for highest gloss applications. | |
| Texicryl® 13-824 | Scott Bader | Texicryl® 13-824 is a hard non film forming emulsion which can be coalesced to form a plasticiser and solvent resistant film. Excellent adhesion to vinyl and non-absorbent susbstrates. Suitable for inks PVC flooring and wallpaper. | |
| Texicryl® 13-828 | Scott Bader | Texicryl® 13-828 is a higly efficient alkali swellable emulsion designed for waterbased printing ink formulations. Flexographic inks for corrugated board. Suitable as a pigment grinding medium and let down vehicle. | |
| Texicryl® 4025 | Scott Bader | Texicryl® 4025 is an alkali swellable emulsion designed for waterbased printing ink formulations. It has excellent colour development, good heat sealability and gives low blocking. Texicryl® 4025 is cross-linkable with thermoset resins, compatable with s...展開 Texicryl® 4025 is an alkali swellable emulsion designed for waterbased printing ink formulations. It has excellent colour development, good heat sealability and gives low blocking. Texicryl® 4025 is cross-linkable with thermoset resins, compatable with solvents and other resin systems. 收起 | |
| Texipol® 63-201 | Scott Bader | Texipol® 63-201 is an inverse emulsion thickener that imparts a stringy and mildly pseudoplastic rheology to aqueous based compositions. | |
| Texipol® 63-202 | Scott Bader | Texipol® 63-202 is an inverse emulsion thickener that imparts a pseudoplastic rheology to aqueous based compositions. | |
| Texipol® 63-237 | Scott Bader | Texipol® 63-237 is a multifunctional inverse emulsion thickener developed specifically for the pigment printing of textiles. | |
| Texipol® 63-258 | Scott Bader | Texipol® 63-258 is an inverse emulsion thickener that imparts a highly pseudoplastic rheology to aqueous based compositions. | |
| Texipol® 63-259 | Scott Bader | Texipol® 63-259 is a California Prop 65 free, APEO free, inverse emulsion rheology modifier that imparts a highly pseudoplastic rheology to aqueous based compositions. Texipol® 63-259 is supplied as a pourable, low viscosity liquid that gives almost insta...展開 Texipol® 63-259 is a California Prop 65 free, APEO free, inverse emulsion rheology modifier that imparts a highly pseudoplastic rheology to aqueous based compositions. Texipol® 63-259 is supplied as a pourable, low viscosity liquid that gives almost instantaneous thickening when mixed directly into water-based formulations. 收起 | |
| Texipol® 63-510 | Scott Bader | Texipol® 63-510 is an inverse emulsion designed to thicken over a wide pH range, exceptional performance at low pH. | |
| Texipol® 63-513 | Scott Bader | Texipol® 63-513 is a next generation inverse emulsion synthetic thickener based on a significant proportion of bio-derived content. Texipol® 63-513 imparts pseudoplastic rheology to aqueous compositions and is supplied as a pre-neutralised dispersion as t...展開 Texipol® 63-513 is a next generation inverse emulsion synthetic thickener based on a significant proportion of bio-derived content. Texipol® 63-513 imparts pseudoplastic rheology to aqueous compositions and is supplied as a pre-neutralised dispersion as the sodium salt of an acrylic based polymer. Texipol® 63-513 shows broad pH compatibility. 收起 | |
| TMP (Hydro)® Trimethylol-propane | BASF SE, Intermediates Division 巴斯夫中间体 | 醇酸樹脂、飽和和不飽和聚酯、聚氨酯的基礎原料，可作為水性油漆助劑和烷氧基化的主鏈分子。基於三甲基丙烷的醇酸和聚酯適用於溶劑型油漆（烤漆、雙組分油漆、易拉罐涂料和卷材涂料），也可用於水性漆 | |
| Triethylamine anhydrous | BASF SE, Intermediates Division 巴斯夫中间体 | 異氰酸酯反應催化劑，陰離子穩定的水性樹脂中和劑。三乙胺可作為催化劑用於合成聚氨酯和雙組分油漆。三乙胺適合作為中和劑用於基於聚酯、醇酸、丙烯酸樹脂和含羧基或其它酸基團的聚氨酯水性油漆 | |
| Triethyleneglycol di vinyl ether, DVE-3 | BASF SE, Intermediates Division 巴斯夫中间体 | 三縮乙二醇二乙烯醚是一種活性稀釋劑，適合不飽和聚酯、UV涂料、UV油墨、UV膠粘劑和離型涂料。與聚丙烯酸酯聚合物交聯可用作離子交換樹脂。是硫基密封劑化合物的基礎原料。三縮乙二醇二乙烯醚可應用於UV涂料（木器、印刷油墨）和UV膠粘劑 | |
| Triphenylphosphine | BASF SE, Intermediates Division 巴斯夫中间体 | 環氧反應催化劑。三苯基膦可用於樹脂生產，例如用於CED涂料的環氧改性 |
