成功!

成功保存搜索結果
Aromatic Urethane Hexaacrylate SM6329 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 SM6329 is an aromatic urethane hexaacrylate. It offers high reactivity and hardness, and provides abrasion and chemical resistance. SM6329 is widely used in UV coatings, adhesives and inks.
BM52 Pioneer Chemicals Co., Ltd. BM52, in the form of a powder, is a copolymer of methacrylates that is a kind of alcohol solubility resin and can be dissolved by ethanol and other weak solvents. It has low odor, high purity, and offers better hardness and pigment dispersion, and holds ...展開 BM52, in the form of a powder, is a copolymer of methacrylates that is a kind of alcohol solubility resin and can be dissolved by ethanol and other weak solvents. It has low odor, high purity, and offers better hardness and pigment dispersion, and holds admirable adhesion on almost all nylons (PA) and metals. BM52 is widely used in coatings on special substrates, alcohol soluble inks, and eco-friendly coatings with a molecular weight of 70,000 g/mol, moisture content of equal to or less than 1.0%, and an inherent viscosity of 0.51 to 55. 收起
BM61 Pioneer Chemicals Co., Ltd. BM61, in the form of a pellet, is a copolymer of methacrylates that offers performance on good durability, adhesion, low shrinkage, and good flexibility. It can be dissolved in numerous organic solvents such as chlorinated solvents, high alcohol, aromatic...展開 BM61, in the form of a pellet, is a copolymer of methacrylates that offers performance on good durability, adhesion, low shrinkage, and good flexibility. It can be dissolved in numerous organic solvents such as chlorinated solvents, high alcohol, aromatic hydrocarbons, ketones, esters. It has good compatibility with cellulose acetate, NC, vinyl resin, and it is commonly used in UV ink formulation (OPP/BOPP film) as inert resin to reduce shrinkage and to enhance adhesion. BM61 is also broadly used in eco-friendly correction fluid, aluminum heat sealing lacquer, cardboard ink, and more. It has a molecular weight of 50,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 6.5 mgKOH/g, and an inherent viscosity of 0.20 to 0.26. 收起
BM61A Pioneer Chemicals Co., Ltd. BM61A, in the form of a pellet, is a copolymer of methacrylates that offers performance on good durability, adhesion, low shrinkage, and good flexibility. It can be dissolved in numerous organic solvents such as chlorinated solvents, high alcohol, aromati...展開 BM61A, in the form of a pellet, is a copolymer of methacrylates that offers performance on good durability, adhesion, low shrinkage, and good flexibility. It can be dissolved in numerous organic solvents such as chlorinated solvents, high alcohol, aromatic hydrocarbons, ketones, esters. It has good compatibility with cellulose acetate, NC, vinyl resin, plasticizer, and it is commonly used in UV ink formulation (OPP/BOPP film) as inert resin to reduce shrinkage and to enhance adhesion. BM61A is also broadly used in gravure inks, aluminum heat sealing lacquer, cardboard ink, and more. It has a molecular weight of 50,000 g/mol, moisture content of equal to or less than 0.5%, and an inherent viscosity of 0.20 to 0.26. 收起
BM70 Pioneer Chemicals Co., Ltd. BM70, in the form of a pellet, is a copolymer of methyl methacrylate and methacrylic acid that is soluble in polar organic solvents such as ketones and esters and can be dissolved in esters (or ketones) for alcohol soluble inks and mixed solvent like abso...展開 BM70, in the form of a pellet, is a copolymer of methyl methacrylate and methacrylic acid that is soluble in polar organic solvents such as ketones and esters and can be dissolved in esters (or ketones) for alcohol soluble inks and mixed solvent like absolute ethyl alcohol. It offers good adhesion on glass, metal, plastic, and is broadly used in glass inks, metal coatings, and more. BM70 has a molecular weight of 40,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 70 mgKOH/g, and an inherent viscosity of 65.0 to 70.0. 收起
Bisphenol A Epoxy Diacrylate SM6104 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 SM6104 is a standard bisphenol A epoxy diacrylate. It provides low viscosity and light color, and offers high gloss, hardness and excellent chemical resistance. This product is widely used in UV coatings, inks and adhesives, and more.
CAC (2-Ethoxyethyl Acetate) Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 CAC (2-Ethoxyethyl Acetate) is a colorless, water-soluble liquid. It is miscibile with general organic solvents. This product is mainly used for metal, furniture paint solvents, brush paint solvent, also can be used as solvent of protective coating, dye, ...展開 CAC (2-Ethoxyethyl Acetate) is a colorless, water-soluble liquid. It is miscibile with general organic solvents. This product is mainly used for metal, furniture paint solvents, brush paint solvent, also can be used as solvent of protective coating, dye, resin, leather, printing ink. 收起
Cyclic Trimethylopropane Formal Acrylate (CTFA) Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 CTFA is a mono-functional UV monomer. It offers high reactivity, flexibility, low shrinkage, and good adhesion. This monomer is widely used in UV or EB cured coatings, adhesives and inks.
DBE (Dibasic Esters) Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 DBE is a mixed dibasic acid ester with a high boiling point. It is a kind of low toxicity, low odor, biodegradable and environmentally friendly solvent. This product is widely used in paints, coatings, printing inks, and other fields.
DPM (Dipropylene Glycol Methyl Ether) Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 DPM is a top grade solvent used in water-based coatings. It has low toxicity, low viscosity, low surface tension, good evaporation rate, good dissolving ability, and good coupling ability. This product is widely used in paints, coatings, and printing inks...展開 DPM is a top grade solvent used in water-based coatings. It has low toxicity, low viscosity, low surface tension, good evaporation rate, good dissolving ability, and good coupling ability. This product is widely used in paints, coatings, and printing inks. 收起
ESTISOL 140 Esti Chem A/S ESTISOL 140 is a synthetic based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 195 to 205 °C and can reduce or eliminate VOC content in products. ESTISOL 140 can act as...展開 ESTISOL 140 is a synthetic based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 195 to 205 °C and can reduce or eliminate VOC content in products. ESTISOL 140 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. 收起
ESTISOL 150 Esti Chem A/S ESTISOL 150 is a synthetic based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 220 to 225 °C and can reduce or eliminate VOC content in products. ESTISOL 150 can act as...展開 ESTISOL 150 is a synthetic based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 220 to 225 °C and can reduce or eliminate VOC content in products. ESTISOL 150 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. 收起
ESTISOL 165 Esti Chem A/S ESTISOL 165 is a synthetic based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 180 to 190 °C and can reduce or eliminate VOC content in products. ESTISOL 165 can act as...展開 ESTISOL 165 is a synthetic based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 180 to 190 °C and can reduce or eliminate VOC content in products. ESTISOL 165 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. 收起
ESTISOL 170 Esti Chem A/S ESTISOL 170 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 180 to 300 °C and can reduce or eliminate VOC content in products. ESTISOL 170 can act as...展開 ESTISOL 170 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 180 to 300 °C and can reduce or eliminate VOC content in products. ESTISOL 170 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. 收起
ESTISOL 180 Esti Chem A/S ESTISOL 180 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 175 to 195 °C and can reduce or eliminate VOC content in products. ESTISOL 180 can act as...展開 ESTISOL 180 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 175 to 195 °C and can reduce or eliminate VOC content in products. ESTISOL 180 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. 收起
ESTISOL 240 Esti Chem A/S ESTISOL 240 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 255 to 320 °C and can reduce or eliminate VOC content in products. ESTISOL 240 can act as...展開 ESTISOL 240 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 255 to 320 °C and can reduce or eliminate VOC content in products. ESTISOL 240 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. 收起
ESTISOL 242 Esti Chem A/S ESTISOL 242 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 270 to 280 °C and can reduce or eliminate VOC content in products. ESTISOL 242 can act as...展開 ESTISOL 242 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 270 to 280 °C and can reduce or eliminate VOC content in products. ESTISOL 242 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. 收起
ESTISOL 260 Esti Chem A/S ESTISOL 260 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 260 to 320 °C and can reduce or eliminate VOC content in products. ESTISOL 260 can act as...展開 ESTISOL 260 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 260 to 320 °C and can reduce or eliminate VOC content in products. ESTISOL 260 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. 收起
ESTISOL 295 Esti Chem A/S ESTISOL 295 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 300 to 360 °C and can reduce or eliminate VOC content in products. ESTISOL 295 can act as...展開 ESTISOL 295 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 300 to 360 °C and can reduce or eliminate VOC content in products. ESTISOL 295 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. 收起
ESTISOL 300 Esti Chem A/S ESTISOL 300 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 320 to 355 °C and can reduce or eliminate VOC content in products. ESTISOL 300 can act as...展開 ESTISOL 300 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 320 to 355 °C and can reduce or eliminate VOC content in products. ESTISOL 300 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. 收起
ESTISOL 305 Esti Chem A/S ESTISOL 305 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 300 to 360 °C and can reduce or eliminate VOC content in products. ESTISOL 305 can act as...展開 ESTISOL 305 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 300 to 360 °C and can reduce or eliminate VOC content in products. ESTISOL 305 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. 收起
ESTISOL 312 Esti Chem A/S ESTISOL 312 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 320 to 340 °C and can reduce or eliminate VOC content in products. ESTISOL 312 can act as...展開 ESTISOL 312 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 320 to 340 °C and can reduce or eliminate VOC content in products. ESTISOL 312 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. 收起
ESTISOL 390 Esti Chem A/S ESTISOL 390 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of >350 °C and can reduce or eliminate VOC content in products. ESTISOL 390 can act as a VOC...展開 ESTISOL 390 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of >350 °C and can reduce or eliminate VOC content in products. ESTISOL 390 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. 收起
Epoxy Resin SM828 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 SM828 is an undiluted, clear difunctional bisphenol A/epichlorohydrin derived liquid epoxy resin. It is a widely-used, general purpose liquid epoxy resin. This product is recognized as the standard from which many variations have been developed. It is rec...展開 SM828 is an undiluted, clear difunctional bisphenol A/epichlorohydrin derived liquid epoxy resin. It is a widely-used, general purpose liquid epoxy resin. This product is recognized as the standard from which many variations have been developed. It is recommended for adhesives, marine and protective coatings, can and coil coatings, automotive coatings, and more. 收起
MB-10 Pioneer Chemicals Co., Ltd. MB-10, in the form of a bead, is the homopolymer of BMA that offers good adhesion and flexibility and is easily soluble in various organic solvents such as aromatic hydrocarbons, esters, ketones, and long-chain fatty alcohol. It has good compatibility wit...展開 MB-10, in the form of a bead, is the homopolymer of BMA that offers good adhesion and flexibility and is easily soluble in various organic solvents such as aromatic hydrocarbons, esters, ketones, and long-chain fatty alcohol. It has good compatibility with other film forming resins such as vinyl resin, NC, and chlorinated rubber. MB-10 is mainly used in containers and packaging, functional coatings and inks, inks for PET coated films and papers, especially suitable for aluminum substrate coatings and inks for lithographic heat transfers. It has a molecular weight of 180,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 9.0 mgKOH/g, and an inherent viscosity of 0.47 to 0.56. 收起
MB-2 Pioneer Chemicals Co., Ltd. MB-2, in the form of a bead, is a copolymer of Methacrylates and Styrene with enough hardness, offers high gloss, good gasoline resistance, abrasion resistance, humidity and heat resistance, and good solvent release ability. It is easily soluble in sever...展開 MB-2, in the form of a bead, is a copolymer of Methacrylates and Styrene with enough hardness, offers high gloss, good gasoline resistance, abrasion resistance, humidity and heat resistance, and good solvent release ability. It is easily soluble in several organic solvents including esters, chlorinated solvents ketones, aromatic hydrocarbons, and it has good compatibility with other film forming resins such as plasticizers, vinyl resin and NC. MB-2 is broadly used in PVC printing inks, masonry coatings, PVC processing, upholstery, floor coatings, gravure inks, PVC top coatings, and road marking. It has a molecular weight of 140,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.62 to 0.68. 收起
MB-311 Pioneer Chemicals Co., Ltd. MB-311, in the form of a bead, is a copolymer of butyl methacrylate that offers good durability and weather-ability, and it also offers good flexibility, pigment dispersion, better flow-ability, and high gloss due to its low molecular weight of 30,000 g/m...展開 MB-311, in the form of a bead, is a copolymer of butyl methacrylate that offers good durability and weather-ability, and it also offers good flexibility, pigment dispersion, better flow-ability, and high gloss due to its low molecular weight of 30,000 g/mol. It is easily soluble in long-chain alcohol, esters, ketones, aromatic hydrocarbons, and chlorinated solvent. MB-311 is normally used in varnish coatings, ceramic inks, and top coatings. It has a moisture content of equal to or less than 1.0%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.13 to 0.17. 收起
MB-6 Pioneer Chemicals Co., Ltd. MB-6, in the form of a bead, is a copolymer of methyl methacrylate and butyl methacrylate, as a multi-usage acrylic resin, it offers excellent performance on chemical resistance, weather ability, and durability. It is easily soluble in several organic sol...展開 MB-6, in the form of a bead, is a copolymer of methyl methacrylate and butyl methacrylate, as a multi-usage acrylic resin, it offers excellent performance on chemical resistance, weather ability, and durability. It is easily soluble in several organic solvents including chlorinated solvents, ketones, aromatic hydrocarbons, esters, and it can solely be dissolved by high alcohols. With good solvent release ability, it also has excellent compatibility with other film forming resins, for instance chlorinated rubber, plasticizer, vinyl resins, and NC. MB-6 is broadly used in screen printing inks, container coatings, marine paints, masonry coatings, general purpose coatings, concrete coatings, external wall coatings, general purpose printing inks, concrete sealants, and road marker paints. It has a molecular weight of 50,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 3.5 mgKOH/g, and an inherent viscosity of 0.23 to 0.30. 收起
MB-8 Pioneer Chemicals Co., Ltd. MB-8, in the form of a bead, is a copolymer of methyl methacrylate that has good performance on durability, alcohol resistance, chemical resistance, arrangement of aluminum powders, and plasticizer migration resistance. It is easily soluble in several org...展開 MB-8, in the form of a bead, is a copolymer of methyl methacrylate that has good performance on durability, alcohol resistance, chemical resistance, arrangement of aluminum powders, and plasticizer migration resistance. It is easily soluble in several organic solvents including ketones, aromatic hydrocarbons, esters, and has good compatibility with plasticizers, NC, CAB, and vinyl resin. MB-8 is broadly applied in leather treating agent, gilding material coatings, plastic coatings, printing inks, and PVC printing inks and coatings. It has a molecular weight of 90,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 7.0 mgKOH/g, and an inherent viscosity of 0.37 to 0.43. 收起
MB-9 Pioneer Chemicals Co., Ltd. MB-9, in the form of a bead, is a homopolymer of i-butyl methacrylate and is easily soluble in chlorinated solution, aromatics, ketones, and esters. It is very compatible with chlorinated rubber, cellulose resin, and vinyl resin. MB-9 is an acrylic resin ...展開 MB-9, in the form of a bead, is a homopolymer of i-butyl methacrylate and is easily soluble in chlorinated solution, aromatics, ketones, and esters. It is very compatible with chlorinated rubber, cellulose resin, and vinyl resin. MB-9 is an acrylic resin with admirable durability, gloss, hardness, and heat resistance for use in adhesives, road marking, construction coatings, road coatings, miscellaneous ink, aerosol lacquers, plastic coating, ceramic coating, metal coatings, printing inks, and wood finishes. It has a molecular weight of 200,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 7.0 mgKOH/g, and an inherent viscosity of 0.53 to 0.59. 收起
PChem® BM11 Pioneer Chemicals Co., Ltd. PChem® BM11, in the form of a powder, is a copolymer of acrylate and methacrylate that offers good durability, heat resistance, good chemical resistances to gasoline, alcohol, and blocks the migration of plasticizer contained in the vinyl resins. PChem® B...展開 PChem® BM11, in the form of a powder, is a copolymer of acrylate and methacrylate that offers good durability, heat resistance, good chemical resistances to gasoline, alcohol, and blocks the migration of plasticizer contained in the vinyl resins. PChem® BM11 is compatible with many nitrocellulose and solvents and is commonly used in applications of coating for toys, marine coating, plastic coating, gravure inks, silk screen printing inks, printing inks for soft PVC, and leather finishes. It has a molecular weight of 85,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 2.0 mgKOH/g, and an inherent viscosity of 0.36. 收起
PChem® BM111 Pioneer Chemicals Co., Ltd. PChem® BM111, in the form of a powder, is a copolymer of acrylate and methacrylate that offers good durability, heat resistance, gasoline, chemical resistances to alcohol, and blocks the migration of plasticizer contained in the vinyl resins. It can be di...展開 PChem® BM111, in the form of a powder, is a copolymer of acrylate and methacrylate that offers good durability, heat resistance, gasoline, chemical resistances to alcohol, and blocks the migration of plasticizer contained in the vinyl resins. It can be dissolved into methyl methacrylate monomer and other ingredients to form a prepolymer syrup for casting applications and is compatible with many nitrocellulose and solvents and commonly used in applications of silk screen printing inks, plastic coating, marine coating. PChem® BM111 has a molecular weight of 110,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 2.0 mgKOH/g, and an inherent viscosity of 0.48. 收起
PChem® BM112A Pioneer Chemicals Co., Ltd. PChem® BM112A, in the form of a pellet, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers high flexibility, adhesion, durability, and low shrinkage rate. It is compatible with numerous nitrocellulose and solvents and is generally ...展開 PChem® BM112A, in the form of a pellet, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers high flexibility, adhesion, durability, and low shrinkage rate. It is compatible with numerous nitrocellulose and solvents and is generally used in applications of aluminum sealer, paper printing, and UV curing technology. PChem® BM112A has a molecular weight of 70,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.24. 收起
PChem® BM131 Pioneer Chemicals Co., Ltd. PChem® BM131, in the form of a powder, is a copolymer of acrylate and methacrylate that offers good durability and heat resistance. It also offers good gasoline, chemical resistances to alcohol, and blocks the migration of plasticizer contained in the vin...展開 PChem® BM131, in the form of a powder, is a copolymer of acrylate and methacrylate that offers good durability and heat resistance. It also offers good gasoline, chemical resistances to alcohol, and blocks the migration of plasticizer contained in the vinyl resins. PChem® BM131 is compatible with many nitrocellulose and solvents and commonly used in applications of silk screen printing inks. marine coating, plastic coating, gravure inks, and good for flexographic inks. It has a molecular weight of 84,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.40. 收起
PChem® BM164 Pioneer Chemicals Co., Ltd. PChem® BM164, in the form of a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers durability and hard heat resistance. It is compatible with numerous nitrocellulose and solvents and commonly used in applications of sealer, ...展開 PChem® BM164, in the form of a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers durability and hard heat resistance. It is compatible with numerous nitrocellulose and solvents and commonly used in applications of sealer, marine coating, plastic coating, concrete cure, and is suitable for dear coating of exterior and interior concrete floors and road surface. PChem® BM164 has a molecular weight of 92,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 3.0 mgKOH/g, and an inherent viscosity of 0.40. 收起
PChem® BM17 Pioneer Chemicals Co., Ltd. PChem® BM17, in the form of a powder, is a copolymer of acrylate and methacrylate that offers good durability, heat resistance, good chemical resistances to gasoline, alcohol, and blocks the migration of plasticizer contained in the vinyl resins. PChem® B...展開 PChem® BM17, in the form of a powder, is a copolymer of acrylate and methacrylate that offers good durability, heat resistance, good chemical resistances to gasoline, alcohol, and blocks the migration of plasticizer contained in the vinyl resins. PChem® BM17 is compatible with many nitrocellulose and solvents and is commonly used in applications of coating for toys, marine coating, plastic coating, gravure inks, silk screen printing inks, and inks for smoking materials. It has a molecular weight of 90,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.40. 收起
PChem® BM260 Pioneer Chemicals Co., Ltd. PChem® BM260, in the form of a powder, is a copolymer of butyl methacrylate and methyl methacrylate that can react with polyisocyanate resins and amino to form cross-linked structures, which makes it good for 2K system coatings and printing inks. It is so...展開 PChem® BM260, in the form of a powder, is a copolymer of butyl methacrylate and methyl methacrylate that can react with polyisocyanate resins and amino to form cross-linked structures, which makes it good for 2K system coatings and printing inks. It is soluble in chlorinated hydrocarbons, esters, glycol ether acetates, ketones, aromatic, glycol ethers, and is a binder for adhesion of polystyrene and aluminum, and that is good for applications of pigmented lacquer and compatible with alkyd resins. PChem® BM260 has a molecular weight of 24,000 g/mol, moisture content of equal to or less than 1.0%, acid value of 7 mgKOH/g, and an inherent viscosity of 0.40. 收起
PChem® BM270 Pioneer Chemicals Co., Ltd. PChem® BM270, in the form of a pellet, is a copolymer of methyl methacrylate that has a high acid number, medium molecular weight, and excellent pigment dispersion property. It is compatible with ketone solvents, designed for photoresist ink applications,...展開 PChem® BM270, in the form of a pellet, is a copolymer of methyl methacrylate that has a high acid number, medium molecular weight, and excellent pigment dispersion property. It is compatible with ketone solvents, designed for photoresist ink applications, and is generally used in applications of cover PVC substrates, pigment dispersion, hot process stamping, and more. PChem® BM270 has a molecular weight of 60,000 g/mol, moisture content of equal to or less than 0.5%, acid value of 124 mgKOH/g, and an inherent viscosity of 0.31. 收起
PChem® BM51 Pioneer Chemicals Co., Ltd. PChem® BM51, in the form of a powder, is a copolymer of methyl methacrylates with alcohol soluble characteristics that offers good pigment dispersion properties and weather-ability. It is soluble in glycol ether acetates, esters, ketones, glycol ethers, a...展開 PChem® BM51, in the form of a powder, is a copolymer of methyl methacrylates with alcohol soluble characteristics that offers good pigment dispersion properties and weather-ability. It is soluble in glycol ether acetates, esters, ketones, glycol ethers, aromatic, and is compatible with a wide selection of other resins including polyesters, acrylics, vinyl, and is applicable in coatings and inks with alcohol resistance. PChem® BM51 has a molecular weight of 60,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 6.0 mgKOH/g, and an inherent viscosity of 0.24. 收起
PChem® BM60 Pioneer Chemicals Co., Ltd. PChem® BM60, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and wet adhesion to many plastic substrates such as polystyrene, acrylic,...展開 PChem® BM60, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and wet adhesion to many plastic substrates such as polystyrene, acrylic, PVC, and ABS. It is very compatible with numerous nitrocellulose and solvents and generally used in applications of metal coatings, marine coating, plastic coating, gravure printing inks, silk screen printing inks. PChem® BM60 has a molecular weight of 40,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 10.0 mgKOH/g, and an inherent viscosity of 0.18. 收起
PChem® BM60E Pioneer Chemicals Co., Ltd. PChem® BM60E, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and wet adhesion to many plastic substrates such as polystyrene, acrylic...展開 PChem® BM60E, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and wet adhesion to many plastic substrates such as polystyrene, acrylic, PVC, and ABS. It is very compatible with numerous nitrocellulose and solvents and generally used in applications of metal coatings, marine coating, plastic coating, gravure printing inks, silk screen printing inks. PChem® BM60 has a molecular weight of 35,000 g/mol, moisture content of equal to or less than 1.0%, acid value of 8.5 mgKOH/g, and an inherent viscosity of 0.17. 收起
PChem® BM66 Pioneer Chemicals Co., Ltd. PChem® BM66, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and wet adhesion to many plastic substrates such as polystyrene, acrylic,...展開 PChem® BM66, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and wet adhesion to many plastic substrates such as polystyrene, acrylic, PVC, and ABS. It is very compatible with numerous nitrocellulose and solvents and generally used in applications of metal coatings, concrete coatings, marine coating, plastic coating, gravure inks, silk screen printing inks. PChem® BM66 has a molecular weight of 50,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 6.5 mgKOH/g, and an inherent viscosity of 0.27. 收起
PChem® BM66D Pioneer Chemicals Co., Ltd. PChem® BM66D, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and wet adhesion to many plastic substrates such as polystyrene, acrylic...展開 PChem® BM66D, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and wet adhesion to many plastic substrates such as polystyrene, acrylic, PVC, and ABS. It is very compatible with numerous nitrocellulose and solvents and generally used in applications of road marking, marine coating, plastic coating, PVC printing inks, gravure inks, paints for wall, and silk screen printing inks. PChem® BM66D has a molecular weight of 45,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 6.5 mgKOH/g, and an inherent viscosity of 0.25. 收起
PChem® BM71 Pioneer Chemicals Co., Ltd. PChem® BM71, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and good adhesion to different substrates such as polystyrene, metals, ac...展開 PChem® BM71, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and good adhesion to different substrates such as polystyrene, metals, acrylic, PVC, and ABS. It is very compatible with numerous nitrocellulose and solvents and generally used in applications of heat sealer lacquer, concrete sealer, PVC replacement in automotive plastisol, road marking, plastic coating, gravure inks, and silk screen printing inks. PChem® BM71 has a molecular weight of 100,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 3.5 mgKOH/g, and an inherent viscosity of 0.54. 收起
PChem® BM72 Pioneer Chemicals Co., Ltd. PChem® BM72, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and good adhesion to different substrates such as polystyrene, metals, ac...展開 PChem® BM72, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and good adhesion to different substrates such as polystyrene, metals, acrylic, PVC, and ABS. It is very compatible with numerous nitrocellulose and solvents and generally used in applications of heat sealer lacquer, concrete sealer, road marking, plastic coating, gravure inks, and silk screen printing inks. PChem® BM72 has a molecular weight of 32,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 6.0 mgKOH/g, and an inherent viscosity of 0.15. 收起
PChem® BM76 Pioneer Chemicals Co., Ltd. PChem® BM76, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and good adhesion to different substrates such as polystyrene, acrylic, P...展開 PChem® BM76, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and good adhesion to different substrates such as polystyrene, acrylic, PVC, and ABS. It is very compatible with numerous nitrocellulose and solvents and generally used in applications of marine coating, concrete sealer, wood coating, plastic coating, seamless flooring, protective coatings, gravure inks, and silk screen printing inks. PChem® BM76 has a molecular weight of 105,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 8.0 mgKOH/g, and an inherent viscosity of 0.37. 收起
PChem® BM81 Pioneer Chemicals Co., Ltd. PChem® BM81, in the form or a pellet, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, hard heat resistance, good dry and wet adhesion to many plastic substrates such as polystyrene, acrylic, PVC, and AB...展開 PChem® BM81, in the form or a pellet, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, hard heat resistance, good dry and wet adhesion to many plastic substrates such as polystyrene, acrylic, PVC, and ABS. It is very compatible with numerous nitrocellulose and solvents and generally used in applications of silk screen printing inks, marine coating, inks, gravure inks, and plastic coating. PChem® BM81 has a molecular weight of 30,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 2.0 mgKOH/g, and an inherent viscosity of 0.12. 收起
PChem® BM82 Pioneer Chemicals Co., Ltd. PChem® BM82, in the form of a pellet, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers high flexibility, adhesion, low shrinkage rate, and durability. It is compatible with numerous nitrocellulose and solvents, can be used as a b...展開 PChem® BM82, in the form of a pellet, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers high flexibility, adhesion, low shrinkage rate, and durability. It is compatible with numerous nitrocellulose and solvents, can be used as a base resin for UV curing of BOPP and OPP systems, and is generally used in applications of aluminum sealer, paper printing, leather finish, metal coating, and stamping ink (adhesive layer). PChem® BM82 has a molecular weight of 90,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 3.0 mgKOH/g, and an inherent viscosity of 0.37. 收起
PChem® BM99 Pioneer Chemicals Co., Ltd. PChem® BM99, in the form of a pellet, is a copolymer of methyl methacrylate that has a high heat resistance and good pigment dispersion property. It is compatible with ketone solvents and commonly used in application of inks for packaging materials and ho...展開 PChem® BM99, in the form of a pellet, is a copolymer of methyl methacrylate that has a high heat resistance and good pigment dispersion property. It is compatible with ketone solvents and commonly used in application of inks for packaging materials and hot process stamping. PChem® BM99 has a molecular weight of 20,000 g/mol, moisture content of equal to or less than 0.5%, acid value of 78 mgKOH/g. 收起
PChem® MB-10-B Pioneer Chemicals Co., Ltd. PChem® MB-10-B, in the form of a bead, is a copolymer of methyl methacrylate and n-butyl methacrylate that offers hard durability and heat resistance. It has good compatibility with numerous nitrocellulose and solvents and good adhesion to aluminum substr...展開 PChem® MB-10-B, in the form of a bead, is a copolymer of methyl methacrylate and n-butyl methacrylate that offers hard durability and heat resistance. It has good compatibility with numerous nitrocellulose and solvents and good adhesion to aluminum substrates. PChem® MB-10-B is commonly used in applications of inks for lithographic heat transfers, inks for PET coated films and papers, ceramic transfer printing inks, containers and packaging, aerosol paints, adhesives, coatings on aluminum foils, and packaging inks. It has a molecular weight of 160,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.45. 收起
PChem® MB-11 Pioneer Chemicals Co., Ltd. PChem® MB-11, in the form of a bead, is a copolymer of ethyl methacrylate and butyl methacrylate and is soluble in glycol ether acetates and glycol ethers, alcohols, aromatic, esters, and ketones. It is a binder for applications of gravure inks, BOPP film...展開 PChem® MB-11, in the form of a bead, is a copolymer of ethyl methacrylate and butyl methacrylate and is soluble in glycol ether acetates and glycol ethers, alcohols, aromatic, esters, and ketones. It is a binder for applications of gravure inks, BOPP film adhesions, wood finishes lacquers, plastic coating, flexographic inks, and resin for printing ink. PChem® MB-11 has a molecular weight of 50,000 g/mol, moisture content of equal to or less than 1.0%, acid value less than 6.0 mgKOH/g, and an inherent viscosity of 0.27. 收起
PChem® MB-11-A Pioneer Chemicals Co., Ltd. PChem® MB-11-A, in the form of a bead, is a poly (ethyl methacrylate) polymer and is soluble in aliphatic hydrocarbon solvents, alcohols, and esters. It is a binder for applications of flexographic inks, silk screen inks, and resin for printing ink. PChem...展開 PChem® MB-11-A, in the form of a bead, is a poly (ethyl methacrylate) polymer and is soluble in aliphatic hydrocarbon solvents, alcohols, and esters. It is a binder for applications of flexographic inks, silk screen inks, and resin for printing ink. PChem® MB-11-A has a molecular weight of 50,000 g/mol, moisture content of equal to or less than 1.0%, acid value less than 9.0 mgKOH/g, and an inherent viscosity of 0.27. 收起
PChem® MB-17 Pioneer Chemicals Co., Ltd. PChem® MB-17, in the form of a bead, is a copolymer of acrylate and methacrylate that offers good durability and heat resistance. It also offers good chemical resistances to gasoline, alcohol, and blocks the migration of plasticizer contained in the vinyl...展開 PChem® MB-17, in the form of a bead, is a copolymer of acrylate and methacrylate that offers good durability and heat resistance. It also offers good chemical resistances to gasoline, alcohol, and blocks the migration of plasticizer contained in the vinyl resins. PChem® MB-17 is very compatible with many nitrocellulose and solvents, and commonly used in applications of silk screen printing inks, marine coating, gravure inks, plastic coating, multi-usage ink, and tobacco packaging ink. It has a molecular weight of 90,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.41. 收起
PChem® MB-313 Pioneer Chemicals Co., Ltd. PChem® MB-313, in the form of a bead, is an acrylic resin that is soluble in glycol ether acetates, esters, ketones, glycol ethers, aromatic, and is very compatible with wide variety of other resins including nitrocellulose, acrylics, and vinyl. It provid...展開 PChem® MB-313, in the form of a bead, is an acrylic resin that is soluble in glycol ether acetates, esters, ketones, glycol ethers, aromatic, and is very compatible with wide variety of other resins including nitrocellulose, acrylics, and vinyl. It provides admirable fast drying characteristics and solvent release ability and it has good pigment wetting properties when used in coating and ink formulations. PChem® MB-313 is for universal applications of exterior paints and metal coatings. It has a molecular weight of 60,000 g/mol, moisture content of equal to or less than 1.0%, acid value of 9 mgKOH/g, and an inherent viscosity of 0.23. 收起
PChem® MB-38 Pioneer Chemicals Co., Ltd. PChem® MB-38, in the form of a bead, is an iso-butyl methacrylate polymer that is soluble in chlorinated hydrocarbons, glycol ethers, esters, ketones, aromatic, and glycol ether acetates. It is very compatible with wide selection of other resins including...展開 PChem® MB-38, in the form of a bead, is an iso-butyl methacrylate polymer that is soluble in chlorinated hydrocarbons, glycol ethers, esters, ketones, aromatic, and glycol ether acetates. It is very compatible with wide selection of other resins including chlorinated rubber resins, nitrocellulose, acrylics, vinyl, and is a good binder for manufacturer of alkyd resins additive, printing inks, heat sealing lacquers for adhesives and aluminum foils, ceramic transfer lacquers, and primers. PChem® MB-38 has a molecular weight of 84,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.31. 收起
PChem® MB-4 Pioneer Chemicals Co., Ltd. PChem® MB-4, in the form of a bead, is a copolymer of methyl methacrylate and n-butyl methacrylate that offers hard durability and heat resistance. It also offers very good wet and dry adhesion to many plastic substrates such as PVC, polystyrene, ABS, and...展開 PChem® MB-4, in the form of a bead, is a copolymer of methyl methacrylate and n-butyl methacrylate that offers hard durability and heat resistance. It also offers very good wet and dry adhesion to many plastic substrates such as PVC, polystyrene, ABS, and acrylic. PChem® MB-4 is very compatible with various nitrocellulose and solvents, and is generally used in applications of metal coatings, marine coating, silk screen printing inks, plastic coating, and gravure inks. It has a molecular weight of 40,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 6.0 mgKOH/g, and an inherent viscosity of 0.18. 收起
PChem® MB-6-A Pioneer Chemicals Co., Ltd. PChem® MB-6-A, in the form of a bead, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers hard durability and heat resistance. It also offers very good wet and dry adhesion to many plastic substrates such as PVC, polystyrene, ABS, a...展開 PChem® MB-6-A, in the form of a bead, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers hard durability and heat resistance. It also offers very good wet and dry adhesion to many plastic substrates such as PVC, polystyrene, ABS, and acrylic. PChem® MB-6-A is very compatible with various nitrocellulose and solvents, and is generally used in applications of metal coatings, marine coating, silk screen printing inks, plastic coating, and gravure inks. It has a molecular weight of 50,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 7.0 mgKOH/g, and an inherent viscosity of 0.24. 收起
PChem® MB-605 Pioneer Chemicals Co., Ltd. PChem® MB-605, in the form of clear solid beads, is an acrylic resin that provides good pigment dispersion characteristics and wetting and is soluble in glycol ether acetates, esters, glycol ethers, ketones, and aromatic. It is compatible with a wide vari...展開 PChem® MB-605, in the form of clear solid beads, is an acrylic resin that provides good pigment dispersion characteristics and wetting and is soluble in glycol ether acetates, esters, glycol ethers, ketones, and aromatic. It is compatible with a wide variety of other resins, such as nitrocellulose, acrylics, vinyl, and is for use in solvent-based inks. PChem® MB-605 has a molecular weight of 8,200 g/mol, moisture content of equal to or less than 1.0%, acid value of 53 mgKOH/g, and an inherent viscosity of 0.06. 收起
PChem® MB-9-B Pioneer Chemicals Co., Ltd. PChem® MB-9-B, in the form of a bead, is a polymer of iso-butyl methacrylate thacrylate that offers high durability, flexibility, heat resistance, and good gloss. It is easily soluble in several organic solvents such as high alcohol, ketones, esters, chlo...展開 PChem® MB-9-B, in the form of a bead, is a polymer of iso-butyl methacrylate thacrylate that offers high durability, flexibility, heat resistance, and good gloss. It is easily soluble in several organic solvents such as high alcohol, ketones, esters, chlorinated solvent, aromatic hydrocarbons, and white gasoline. PChem® MB-9-A can be used as its modifying agent, based on its good compatibility with middle/long oil alkyd resin. It is also compatible with chlorinated paraffin, PVC resin, and it offers admirable pigment wet-ability. PChem® MB-9-A is applied to plastic coatings, alkyd modified coatings, leather finishes, metal coatings, and gilding material coatings (adhesive layer), PVC printing inks and coatings. It has a molecular weight of 70,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.31. 收起
Pchem® BM24G Pioneer Chemicals Co., Ltd. Pchem® BM24G, in the form of pellets, is a copolymer of butyl methacrylate and methyl methacrylate that is soluble in chlorinated hydrocarbons, esters, glycol ethers, ketones, aromatic, and glycol ether acetates. It is compatible with a wide-ranging varie...展開 Pchem® BM24G, in the form of pellets, is a copolymer of butyl methacrylate and methyl methacrylate that is soluble in chlorinated hydrocarbons, esters, glycol ethers, ketones, aromatic, and glycol ether acetates. It is compatible with a wide-ranging variety of other resins including maleinate resins, acrylics, nitrocellulose, vinyl, and chlorinated rubber. Pchem® BM24G is a binder for manufacturer of printing inks, primers, ceramic transfer lacquers, heat sealing lacquers for aluminum foils and adhesives, and ceramic and glass transfer printing lacquers. It has a molecular weight of 180,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.46. 收起
Propylene Glycol Monomethyl Ether (PM) Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Propylene Glycol Monomethyl Ether (PM) is a solvent for nitrocellulose, alkyd resins, and anhydride-modified phenolic resins. It is also used as an additive for antifreeze and brake fluid. This product has excellent dissolving performance, and has appropr...展開 Propylene Glycol Monomethyl Ether (PM) is a solvent for nitrocellulose, alkyd resins, and anhydride-modified phenolic resins. It is also used as an additive for antifreeze and brake fluid. This product has excellent dissolving performance, and has appropriate volatility and reactivity characteristics for a wide range of applications. 收起
Propylene Glycol Monomethyl Ether Acetate (PMA) Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Propylene Glycol Monomethyl Ether Acetate (PMA) is a senior solvent. Because of its molecular structure, it is able to dissolve both polar and non-polar substance. This product is highly recommended for coatings and printing inks, and is also suitable for...展開 Propylene Glycol Monomethyl Ether Acetate (PMA) is a senior solvent. Because of its molecular structure, it is able to dissolve both polar and non-polar substance. This product is highly recommended for coatings and printing inks, and is also suitable for unsaturated polyester, epoxy resins, polyurethane resins, and acrylic resins. 收起