| TEGO® Rad 2800 | Evonik Operations GmbH, BL Coating Additives | TEGO® Rad 2800 is a new release additive for printing inks and varnishes. It has the highest release effect in the Rad portfolio, and therefore takes a further step in completing the range of radiation-curing glide and release additives. This product has ...展開 TEGO® Rad 2800 is a new release additive for printing inks and varnishes. It has the highest release effect in the Rad portfolio, and therefore takes a further step in completing the range of radiation-curing glide and release additives. This product has a pronounced silicone character, combining strong hydrophobing properties with optimum system compatibility. 收起 | Request Sample |
| Dynoadd® F-706 | Dynoadd by Dynea | Dynoadd F-706是一種非硅樹脂聚合型防泡沫和脫氣添加劑。能夠有效防止泡沫的生成，且對脫氣特別有效，因而可以防爆裂。對涂料外觀沒有消極影響。 | |
| BYK®-A 501 FOR UP RESINS | BYK | 不含硅的脫氣劑，適用於不飽和聚酯、環氧和PUR體系。推薦應用於使用環氧樹脂和PUR的體系 | |
| Dynoadd® F-705 | Dynoadd by Dynea | Dynoadd F-705是一種高效的防泡沫非硅樹脂聚合濃縮物，用於溶劑型和UV配方。能夠有效防止泡沫的生成，且對脫氣特別有效，因而可以防爆裂。對涂料外觀沒有消極影響。 | |
| Dynoadd® F-707 | Dynoadd by Dynea | Dynoadd F-707是一種用於溶劑型涂料的非硅樹脂聚合型防泡沫添加劑。能夠有效防止泡沫的生成，且對脫氣特別有效，因而可以防爆裂。它可以控制溶劑型體系的表面張力。少量添加有助於提高流動性，減少縮孔和桔皮等表面缺陷。 | |
| Dynoadd® F-701B | Dynoadd by Dynea | DYNOADD® F -701B是一種高效聚合物添加劑，對空氣釋放和抗氣泡特別有效。它可控制溶劑型塗料的表面張力。少量添加即有助於提高流動性，減少表面缺陷，例如縮孔、桔皮和針孔。該產品與許多蠟乳液具有良好的相容性，用於高蠟含量塗料中具有良好的性能。DYNOADD® F -701B可以結合Dynoadd®流動添加劑，特別是Dynoadd ®F -101使用。 | |
| BYK®-354 FOR INKS | BYK | ||
| Airase® 8070 Deaerator | Evonik Operations GmbH, BL Coating Additives | Airase® 8070 Deaerator is a proprietary, formulated, modified-siloxane deaerator designed to eliminate foam, pinholing, and solvent-popping problems in water-based coatings applied by airless (or air-assisted) spray technologies without generating surface...展開 Airase® 8070 Deaerator is a proprietary, formulated, modified-siloxane deaerator designed to eliminate foam, pinholing, and solvent-popping problems in water-based coatings applied by airless (or air-assisted) spray technologies without generating surface defects. Airase® 8070 Deaerator can be especially effective against microfoam because it is designed to leave a defect-free surface, even when thick layers are applied or highly vicous coatings are sprayed. Airase® 8070 Deaerator contains no chemicals that are considered VOCs per the European Solvent Directive or the European Decorative Paint Directive; it contributes no VOCs nder EPA Method 24 testing conditions when evaluated at typical used levels (1% by weight) in a zero-VOC coating formulation. Additionally, Airase® 8070 Deaerator contains no added alkylphenol ethoxylates (APEs) or hazardous air pollutants (HAPs). 收起 | Request Sample |
| TEGO® Rad 2550 | Evonik Operations GmbH, BL Coating Additives | TEGO® Rad 2550 is a highly efficient cross-linkable slip additive and defoamer for radiation-curing inks and matte varnishes. Creates very low COF and hydrophobic surfaces with release effect. | Request Sample |
| Airase® 5355 Defoamer | Evonik Operations GmbH, BL Coating Additives | Airase® 5355 Defoamer is a relatively strong proprietary siloxane based defoamer designed to control and quickly eliminate foam without generating surface defects in waterbased pigment grinds, inks, overprint varnishes, adhesives and coatings. It does not...展開 Airase® 5355 Defoamer is a relatively strong proprietary siloxane based defoamer designed to control and quickly eliminate foam without generating surface defects in waterbased pigment grinds, inks, overprint varnishes, adhesives and coatings. It does not contain added mineral oils, hazardous air pollutants (HAPs) or alkyl phenol ethoxylates (APEs). Airase® 5355 Defoamer is especially suited for waterbased applications requiring broad food contact compliances. 收起 | Request Sample |
| Surfynol® DF-110BC Defoamer | Evonik Operations GmbH, BL Coating Additives | Surfynol® DF-110BC defoamer is a highly effective, nonionic, molecular defoamer and deaerator. This defoaming/deairentraining agent can be used for a wide variety of applications where foam prevention or foam elimination is necessary without causing surfa...展開 Surfynol® DF-110BC defoamer is a highly effective, nonionic, molecular defoamer and deaerator. This defoaming/deairentraining agent can be used for a wide variety of applications where foam prevention or foam elimination is necessary without causing surface defects. 收起 | Request Sample |
| Antifoam V12 | Basildon Chemical Company Ltd. | Antifoam V12 is a liquid 100% self emulsifying mineral oil based antifoam agent that is amber in color and translucent. It has good reliability properties and versatility properties. This product is easily dilutable when mixed with water, and is used in p...展開 Antifoam V12 is a liquid 100% self emulsifying mineral oil based antifoam agent that is amber in color and translucent. It has good reliability properties and versatility properties. This product is easily dilutable when mixed with water, and is used in printing inks, paints, glues, paint resins, and adhesives. 收起 | |
| SURFYNOL® 118 | Evonik Operations GmbH, BL Coating Additives | SURFYNOL® 118 is a very compatible, formulated molecular defoamer/deaerator based on Gemini surfactant technology. It can be used for a wide variety of applications where pinhole elimination, macro-, and micro-foam control is needed without causing any fi...展開 SURFYNOL® 118 is a very compatible, formulated molecular defoamer/deaerator based on Gemini surfactant technology. It can be used for a wide variety of applications where pinhole elimination, macro-, and micro-foam control is needed without causing any film defects. 收起 | Request Sample |
| TEGO® Airex 923 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 923 is a silicone-free deaerator concentrate that provides outstanding compatibility. Fast and efficient foam breakdown. | Request Sample |
| TEGO® Airex 904 W N | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 904 W N is a very effective deaerator concentrate based on polyether siloxane technology. Very effective against micro-foam. Offers good compatibility. | Request Sample |
| TEGO® Airex 902 W N | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 902 W N is a highly effective and compatible deaerator emulsion based on polyether siloxane technology. Outstandingly effective against micro- and macro-foam. | Request Sample |
| TEGO® Airex 901 W N | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 901 W N is a highly effective deaerator concentrate based on polyether siloxane technology. Outstandingly effective against micro-foam in a variety of applications. | Request Sample |
| BC Antifoam 2226 | Basildon Chemical Company Ltd. | BC Antifoam 2226 is a clear, colorless, mobile, liquid, antifoam compound concentrate free from silicone polymers. It has good stability properties, and is used in paints, printing inks, and paint resins. This product has a non volatile percentage of 100,...展開 BC Antifoam 2226 is a clear, colorless, mobile, liquid, antifoam compound concentrate free from silicone polymers. It has good stability properties, and is used in paints, printing inks, and paint resins. This product has a non volatile percentage of 100, and a specific gravity of 1.0. 收起 | |
| TEGO® Airex 978 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 978 is a very strong deaerator concentrate that provides excellent effectiveness against micro- and macro-foam in solvent-borne, radiation-curing, and high-solids coatings and inks. Very suitable for high build and high viscosity applications. | Request Sample |
| TEGO® Foamex 8050 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 8050 is a highly effective defoamer concentrate based on polyether siloxane technology. Highly suitable as grinding defoamer. | Request Sample |
| PC-1344™ Defoamer | Allnex | PC-1344™ Defoamer is a highly viscous organic polymer. It enhances air release properties and prevents foam formation in acidic or neutral organic fluids at temperatures up to 400 °F. It also performs in some alkaline systems. It has demonstrated an abili...展開 PC-1344™ Defoamer is a highly viscous organic polymer. It enhances air release properties and prevents foam formation in acidic or neutral organic fluids at temperatures up to 400 °F. It also performs in some alkaline systems. It has demonstrated an ability to retain its defoaming capacity over extended periods of time. It works without materially affecting the surface tension of the media. PC-1344™ contains no silicone. PC-1344™ Defoamer applications include usage in gear oils, specialty lubricants, and hydraulic, turbine, or transmission oils. 收起 | Request Sample |
| PC-1244™ Defoamer | Allnex | PC-1244® Defoamer is a solution of organic polymer in a petroleum solvent. It enhances air release properties and prevents foam formation in acidic or neutral organic fluids at temperatures up to 400 °F. It also performs in some alkaline systems. It has d...展開 PC-1244® Defoamer is a solution of organic polymer in a petroleum solvent. It enhances air release properties and prevents foam formation in acidic or neutral organic fluids at temperatures up to 400 °F. It also performs in some alkaline systems. It has demonstrated an ability to retain its defoaming capacity over extended periods of time. It works without materially affecting the surface tension of the media. PC-1244® contains no silicone. PC-1244® Defoamer applications include usage in gear oils, specialty lubricants, and hydraulic, turbine and transmission oils. 收起 | Request Sample |
| AFCONA - 2524 | AFCONA Additives Sdn Bhd | AFCONA – 2524 is a silicone-containing defoamer in a water and hydrocarbon solvent. This white to slightly yellow emulsion functions as a defoamer in water-based polyurethane and acrylic-based emulsions. AFCONA – 2524 can be used as a levelling agent and ...展開 AFCONA – 2524 is a silicone-containing defoamer in a water and hydrocarbon solvent. This white to slightly yellow emulsion functions as a defoamer in water-based polyurethane and acrylic-based emulsions. AFCONA – 2524 can be used as a levelling agent and is easy to incorporate under low shear forces, finding application in coatings and printing inks. 收起 | |
| TEGO® Airex 991 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 991 deaerator for solvent-free and solventborne coating formulation based on deaerating organic polymers, with tip of silicone. It is recommended for industrial coatings and 2-pack coatings based on epoxies and polyurethanes. TEGO® Airex 991 h...展開 TEGO® Airex 991 deaerator for solvent-free and solventborne coating formulation based on deaerating organic polymers, with tip of silicone. It is recommended for industrial coatings and 2-pack coatings based on epoxies and polyurethanes. TEGO® Airex 991 has good recoatability, is highly effective, prevents micro- and macro-foam, and is used particularly for pigmented formulations. 收起 | Request Sample |
| TEGO® Foamex 27 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 27 is an effective defoamer concentrate based on polyether siloxane technology. Universal grinding stage defoamer. Can be used in the let-down with sufficient shear. Prevents macro-and micro-foam. | Request Sample |
| TEGO® Foamex 811 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 811 is an effective defoamer concentrate based on polyether siloxane technology. Universal grinding stage defoamer. Can be used in the let-down with sufficient shear. Prevents macro-and micro-foam. | Request Sample |
| TEGO® Foamex 812 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 812 is an effective defoamer concentrate based on polyether siloxane technology. Universal grinding stage defoamer. Can be used in the let-down with sufficient shear. Prevents macro-and micro-foam. | Request Sample |
| TEGO® Foamex 26 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 26 is a defoamer concentrate. It is suitable for ecolabel compliant formulations. This product is a universal defoamer for the mill base, and it prevents micro- and macro-foam. | Request Sample |
| TEGO® Airex 960 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 960 is a deaerator for solvent-free and solvent-borne coating formulations based on deaerating organic polymers. It is used particularly for pigmented formulations. It is highly effective at preventing micro- and macro-foam. TEGO® Airex 960 ca...展開 TEGO® Airex 960 is a deaerator for solvent-free and solvent-borne coating formulations based on deaerating organic polymers. It is used particularly for pigmented formulations. It is highly effective at preventing micro- and macro-foam. TEGO® Airex 960 can be applied for wood and furniture coatings and floor coatings based on 2-pack polyurethane formulations and based on amine/amide-curing epoxides. 收起 | Request Sample |
| TEGO® Airex 990 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 990 is a deaerator for solventborne coating formulations. It is used for industrial coatings, wood and furniture coatings, coatings for plastics, and leather top coats. TEGO® Airex 990 is highly suitable for high solids coatings formulations a...展開 TEGO® Airex 990 is a deaerator for solventborne coating formulations. It is used for industrial coatings, wood and furniture coatings, coatings for plastics, and leather top coats. TEGO® Airex 990 is highly suitable for high solids coatings formulations as well as for solventborne and solvent-free formulations. It helps prevent pinholes and popping, is highly compatible, has good recoatability, and is highly suitable for clears. It is also suitable for alkyd and UV systems. 收起 | Request Sample |
| MODAFLOW® Resin | Allnex | Modaflow® Resin is an acrylic flow modifier without silicone addition. It is used in non-aqueous industrial coatings and powder coatings to improve flow and leveling, reduce pinholes, fisheyes, craters, and orange peel; and to improve substrate wetting. This product also helps maintain or improve substrate adhesion, to defoam and aid in air release...展開 Modaflow® Resin is an acrylic flow modifier without silicone addition. It is used in non-aqueous industrial coatings and powder coatings to improve flow and leveling, reduce pinholes, fisheyes, craters, and orange peel; and to improve substrate wetting. This product also helps maintain or improve substrate adhesion, to defoam and aid in air release, and to facilitate pigment dispersion. 收起 | Request Sample |
| Dynoadd® F-201ND | Dynoadd by Dynea | Dynoadd® F-201ND is a solution of a polyester-modified acrylic polymer that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-201ND improves air release and reduces foam formation. Small additions contribute to improved flo...展開 Dynoadd® F-201ND is a solution of a polyester-modified acrylic polymer that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-201ND improves air release and reduces foam formation. Small additions contribute to improved flow, and a reduction in surface imperfections like craters, orange peel, and pinholes. 收起 | |
| AIRASE® 5100 | Evonik Operations GmbH, BL Coating Additives | AIRASE® 5100 is a highly effective defoamer concentrate based on polyether siloxane technology. Excellent defoaming ability. | Request Sample |
| SURFYNOL® 104 | Evonik Operations GmbH, BL Coating Additives | A nonionic surfactant that has multifunctional benefits, including wetting and foam control, in aqueous systems. 100% active solid. | Request Sample |
| TEGO® Rad 2700 | Evonik Operations GmbH, BL Coating Additives | 釋放添加劑。 | Request Sample |
| TEGO® Foamex 9 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 9 is an effective defoamer concentrate based on mineral oil technology. Silicone-free. Contains fumed silica. | Request Sample |
| AFCONA - 2020 | AFCONA Additives Sdn Bhd | AFCONA – 2020 is a silicone-free modified polyvinyl polymer in a SBP spirit solvent. This clear to slightly yellow liquid functions as a strong defoamer to prevent foam and blistering, and finds application in solvent-based coatings, printing inks, and th...展開 AFCONA – 2020 is a silicone-free modified polyvinyl polymer in a SBP spirit solvent. This clear to slightly yellow liquid functions as a strong defoamer to prevent foam and blistering, and finds application in solvent-based coatings, printing inks, and thermosetting resin systems. 收起 | |
| PC 1644™ Defoamer | Allnex | PC-1644™ Defoamer is a 40 % solution of an acrylic polymer in a petroleum solvent. It was developed to offer improved defoaming performance versus PC-1244® in non-aqueous organic fluids. PC-1644™ is a general purpose defoamer which offers superior foam co...展開 PC-1644™ Defoamer is a 40 % solution of an acrylic polymer in a petroleum solvent. It was developed to offer improved defoaming performance versus PC-1244® in non-aqueous organic fluids. PC-1644™ is a general purpose defoamer which offers superior foam control at low use levels, generally 10 to 20 % lower use level versus PC-1244®. PC-1644™ is silicone-free and exhibits very low odor. 收起 | Request Sample |
| TEGO® Foamex 852 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 852 is an effective defoamer concentrate based on polyether siloxane technology. Suitable for pigmented and clear formulations. | Request Sample |
| TEGO® Foamex 18 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 18 is a compatible defoamer concentrate based on organic polymer technology. Free of silicone, solvent, and mineral oil. | Request Sample |
| PC-4144-DEFOAMER | Allnex | PC-4144 is a highly efficient defoamer for metal working fluids and metal working fluid emulsions with very low VOC content ( Active substance approx. 100 % \r\n\r\n. | Request Sample |
| PC-2544™ Defoamer | Allnex | PC 2544™ Defoamer is a 40 % solution of an acrylic polymer in a hydrocarbon solvent. It was developed to improve the defoamer stability performance for formulated Group I and Group II lubricants. PC 2544™ is also suggested for evaluation in specialty appl...展開 PC 2544™ Defoamer is a 40 % solution of an acrylic polymer in a hydrocarbon solvent. It was developed to improve the defoamer stability performance for formulated Group I and Group II lubricants. PC 2544™ is also suggested for evaluation in specialty applications where efficient high temperature performance is required. 收起 | Request Sample |
| TEGO® Foamex 11 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 11 is a highly efficient, especially low-VOC defoamer emulsion based on polyether siloxane technology. Developed for architectural paints. | Request Sample |
| Surfynol® MD 20 | Evonik Operations GmbH, BL Coating Additives | Surfynol® MD 20 is a multifunctional defoamer it provides a combination of foam control and dynamic wetting, with the potential to reduce overall additive levels, while minimizing surface defects. Surfynol® MD 20 is exceptionally effective at eliminating ...展開 Surfynol® MD 20 is a multifunctional defoamer it provides a combination of foam control and dynamic wetting, with the potential to reduce overall additive levels, while minimizing surface defects. Surfynol® MD 20 is exceptionally effective at eliminating microfoam and other foam related defects in waterborne systems when used as a foam control agent. It is 100% active, solvent-free, clear liquid. It is free of silicone and hydrophobic silica. It is temperature and pH stable (pH 1-13). Applications include, coatings, graphic arts, adhesives, dye and pigment synthesis, pigment grinding, oil and gas processing, cleaning products, metalworking fluids, cements, mortars and grouts and personal care. 收起 | Request Sample |
| TEGO® Foamex 844 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 844 is an effective defoamer concentrate based on polyether siloxane technology. Contains no fumed silica. Suitable for pigmented and clear formulations. | Request Sample |
| TEGO® Foamex 6 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 6 is an efficient concentrate defoamer for water-based paints with good long-term stability. TEGO® Foamex 6 is silicone- and silica-free. | Request Sample |
| PC-3144® Defoamer | Allnex | PC-3144® Defoamer is a 40 % solution of a modified acrylic polymer in a hydrocarbon solvent. It was developed to improve the defoamer stability performance for formulated synthetic and mineral based lubricants. It is especially recommended for PAO and PIB...展開 PC-3144® Defoamer is a 40 % solution of a modified acrylic polymer in a hydrocarbon solvent. It was developed to improve the defoamer stability performance for formulated synthetic and mineral based lubricants. It is especially recommended for PAO and PIB based synthetic lubricants, as well as the formulations containing these components, where conventional polyacrylate based defoamers do not work or do not work well. 收起 | Request Sample |
| AFCONA - 2721 | AFCONA Additives Sdn Bhd | AFCONA – 2721 is a silicone-based defoamer in a 2-ethylhexylacrylate solvent. This clear to slightly yellow liquid functions as an anti-foam, de-aerating, cross-linking agent that does not provide haziness and has wide compatibility. AFCONA – 2721 finds a...展開 AFCONA – 2721 is a silicone-based defoamer in a 2-ethylhexylacrylate solvent. This clear to slightly yellow liquid functions as an anti-foam, de-aerating, cross-linking agent that does not provide haziness and has wide compatibility. AFCONA – 2721 finds application in ultraviolet coatings, in pigmented or non-pigmented resin systems, and in printing inks. 收起 | |
| TEGO® Foamex 2 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 2 is a cost-effective emulsion defoamer based on hydrocarbon compounds combining good defoaming and compatibility for water-based paints. TEGO® Foamex 2 is silicone-free and silica-free. | Request Sample |
| TEGO® Foamex 8820 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 8820 is an effective bio-based defoamer concentrate based on organic polymer technology. It has broad food contact compliances with green and renewable contents. Free of silicone, solvent, and mineral oil. | Request Sample |
| SILIKOFTAL® NON-STICK 60 | Evonik Operations GmbH, BL Coating Additives | SILIKOFTAL® NON-STICK 60 is an ethoxy-functional silicone polyester resin for release coatings. The product can be used in compliance with FDA 175.300 and BfR XV. | Request Sample |
| TEGO® Foamex 32 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 32 is a defoamer concentrate. It is suitable for ecolabel compliant formulations. This product offers strong defoaming in millbases and high viscosity formulations, particularly for pigmented formulations with a high filler content. | Request Sample |
| AFCONA - 2503 | AFCONA Additives Sdn Bhd | AFCONA – 2503 is an organically modified polysiloxane appeating as a transparent to slightly yellow liquid. This product functions as a water-based defoamer and anti-foaming agent which provides levelling and crater-resistant properties in water-based coa...展開 AFCONA – 2503 is an organically modified polysiloxane appeating as a transparent to slightly yellow liquid. This product functions as a water-based defoamer and anti-foaming agent which provides levelling and crater-resistant properties in water-based coatings and high shear applications such as pigment concentrate preparations. AFCONA – 2503 finds application in high speed flexo printing processes, polyurethane dispersions, acrylic-based decorative paints, and printing inks. 收起 | |
| TEGO® Foamex 20 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 20 is a defoamer emulsion. It is suitable for ecolabel compliant formulations. This product offers very strong defoaming with foam-inhibiting characteristics, universal applicability. It is recommended for clear and pigmented waterborne formu...展開 TEGO® Foamex 20 is a defoamer emulsion. It is suitable for ecolabel compliant formulations. This product offers very strong defoaming with foam-inhibiting characteristics, universal applicability. It is recommended for clear and pigmented waterborne formulations. 收起 | Request Sample |
| TEGO® Foamex 24 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 24 is a defoamer emulsion. It is suitable for ecolabel compliant formulations. This product offers very strong defoaming with foam-inhibiting characteristics, universal applicability. It can be used in clear and pigmented waterborne coatings. | Request Sample |
| TEGO® Foamex 8850 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 8850 is a compatible bio-based defoamer concentrate based on organic polymer technology. It has broad food contact compliances with green and renewable contents. Suitable for grind, let-down, as well as post-addition. | Request Sample |
| TEGO® Foamex 8880 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 8880 is an effective defoamer emulsion based on hybrid technology with high biobased content. It can be easily incorporated, shows good defoaming, and has excellent foam knock down properties. Free of solvents and mineral oil. | Request Sample |
| TEGO® Airex 922 | Evonik Operations GmbH, BL Coating Additives | TEGO®AIREX922 - 世界上最好的用於EP地坪塗料的不含有機矽無溶劑的脫泡劑。 | Request Sample |
| PC-1844™ Defoamer | Allnex | PC-1844® Defoamer is a 40 % solution of an acrylic polymer in a petroleum solvent. It provides improved high temperature performance, and improved efficiency. PC-1844® is recommended for high performance usage where PC-1244®, PC-1644®, or silicone defoame...展開 PC-1844® Defoamer is a 40 % solution of an acrylic polymer in a petroleum solvent. It provides improved high temperature performance, and improved efficiency. PC-1844® is recommended for high performance usage where PC-1244®, PC-1644®, or silicone defoamers do not give adequate performance. These usages include gear oils, specialty lubricants, shock absorber, hydraulic, turbine and transmission oils. 收起 | Request Sample |
| TEGO® Airex 910 | Evonik Operations GmbH, BL Coating Additives | 無溶劑型和溶劑型涂料的脫氣劑。 | Request Sample |
| TEGO® Airex 900 | Evonik Operations GmbH, BL Coating Additives | 溶劑型、無溶劑型和輻射固化型涂料的脫氣劑。 | Request Sample |
| TEGO® Airex 901 W | Evonik Operations GmbH, BL Coating Additives | 水性涂料的脫氣劑。 | Request Sample |
| Hydro-Rez™ 5614 A | Lawter | Hydro-Rez™ 5614 A is a fumarated modified rosin ester that can be dispersed in water with amines, ammonia or morpholine and is also soluble in alcohol. It displays fast water release in aqueous inks, exhibits good flexibility and low viscosity and its hig...展開 Hydro-Rez™ 5614 A is a fumarated modified rosin ester that can be dispersed in water with amines, ammonia or morpholine and is also soluble in alcohol. It displays fast water release in aqueous inks, exhibits good flexibility and low viscosity and its high melting point ensures good leveling and fast solvent release. The product is particularly recommended for use in flexographic inks, while also finding uses in gravure, carton and specialty inks and spirit varnishes. 收起 | |
| ADDITOL® VXL 4992 | Allnex | ADDITOL® VXL 4992 serves as wetting and dispersing agent in high-body UP knifing fillers and glass fibre reinforced pigmented polyesters. It improves the pigment wetting, shortens the dispersion time, reduces the viscosity, enables the increase of the pigment and filler concentration, improves the air release...展開 ADDITOL® VXL 4992 serves as wetting and dispersing agent in high-body UP knifing fillers and glass fibre reinforced pigmented polyesters. It improves the pigment wetting, shortens the dispersion time, reduces the viscosity, enables the increase of the pigment and filler concentration, improves the air release, and has better levelling and flow properties of the ready product. 收起 | Request Sample |
| TEGO® Airex 920 | Evonik Operations GmbH, BL Coating Additives | 輻射固化涂料的脫氣劑。 | Request Sample |
| TEGO® Airex 944 | Evonik Operations GmbH, BL Coating Additives | 用於不含溶劑或溶劑基的地板和木器涂料配方的消泡劑。 對大小氣泡都有抑制作用，非常高效。 | Request Sample |
| TEGO® Airex 902 W | Evonik Operations GmbH, BL Coating Additives | 水性涂料的脫氣劑。 | Request Sample |
| AFCONA - 2040 | AFCONA Additives Sdn Bhd | AFCONA – 2040 is a silicone-containing defoamer with fluorocarbon in a diisobutyl ketone solvent. This clear liquid is compatible with most resin systems and prevents the formation of foam and blisters during manufacture and application with minimal side ...展開 AFCONA – 2040 is a silicone-containing defoamer with fluorocarbon in a diisobutyl ketone solvent. This clear liquid is compatible with most resin systems and prevents the formation of foam and blisters during manufacture and application with minimal side effects. AFCONA – 2040 finds application in low to high polar paint systems, physical drying systems based on acrylic, vinyl, or chlorinated polymers, in polyurethane wood, plastic, and car refinishes, in airless spraying coats, in NC lacquers and acid curing wood and general industrial coatings, in stoving paints, in solvent-based epoxy systems, and in printing inks. 收起 | |
| Siltech® C-4405 | Siltech Corp. | Siltech® C-4405 is an 80% active dispersion of a very high molecular weight polydimethylsiloxane. It is an additive for both water-based as well as solvent-based paints and inks, providing slip, mar resistance, gloss, anti-blocking and release effects. | |
| TEGO® Foamex 883 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 883是一種混濁液體配方，基於疏水性有機活性物和分散的固體顆粒。該消泡劑濃縮液不含有機矽和礦物油，基於可再生原材料，用於研磨料或調色印刷油墨和建築塗料的調漆階段。此產品也適用於食品接觸。 | Request Sample |
| Dynoadd® F-200 | Dynoadd by Dynea | Dynoadd® F-200 is a high molecular-weight acrylic polymer that effectively controls surface tension in solvent-based coating systems. F-200 is contributing to improved flow, and a reduction in surface imperfections like craters, orange peel, and pinholes. Dynoadd® F-200 improves air release...展開 Dynoadd® F-200 is a high molecular-weight acrylic polymer that effectively controls surface tension in solvent-based coating systems. F-200 is contributing to improved flow, and a reduction in surface imperfections like craters, orange peel, and pinholes. Dynoadd® F-200 improves air release and reduces foam formation. 收起 | |
| TEGO® Foamex 10 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 10 is a defoamer emulsion for waterborne formulations. It is suitable for ecolabel compliant formulations. This product offers very strong defoaming, especially for pigmented high-viscosity formulations. It is an alternative to mineral oil de...展開 TEGO® Foamex 10 is a defoamer emulsion for waterborne formulations. It is suitable for ecolabel compliant formulations. This product offers very strong defoaming, especially for pigmented high-viscosity formulations. It is an alternative to mineral oil defoamers, and can be used for paints of medium to high PVC and for stuccos. 收起 | Request Sample |
| TEGO® Rad 2650 | Evonik Operations GmbH, BL Coating Additives | 釋放添加劑。 | Request Sample |
| TEGO® Airex 904 W | Evonik Operations GmbH, BL Coating Additives | TEGO® AIREX 904 W是一種聚醚矽氧烷共聚物，含有氣相二氧化矽。本產品是一種有效的脫氣濃縮物，可消除微泡。 TEGO® AIREX 904 W具有相容性和有效性的良好平衡。它非常適合無氣噴塗應用。它也適用於壓縮空氣噴塗和刷塗/輥塗應用。由於低溫引起的混濁是可逆的，並且不會影響TEGO® AIREX 904 W的性能 | Request Sample |
| Flex-Rez™ 1074 CS C | Lawter | Flex-Rez™ 1074 CS C is a co-solvent soluble polyamide resin that provides good adhesion to treated film like aluminum, nylon, glassine and other aluminum-coated films. It is also a good film former, shows low viscosity, fast solvent release, resistance to...展開 Flex-Rez™ 1074 CS C is a co-solvent soluble polyamide resin that provides good adhesion to treated film like aluminum, nylon, glassine and other aluminum-coated films. It is also a good film former, shows low viscosity, fast solvent release, resistance to oils, alkalis, grease and water and is compatible with high acid-value rosins, phenolic and other rosin offshoots. Flex-Rez™ 1074 CS C is suitable for use in flexographic and gravure inks, heat and seal coatings, cold seal release lacquers and in overprint varnishes. 收起 | |
| ADDAPT® WaxMul™ C 325 | ADDAPT Chemicals BV | ADDAPT® WaxMul™ C 325 is an emulsion based on T3-type carnauba wax in water. It is used to improve scratch resistance, lubrication, as well as the release and anti-block properties. This product is used in floor, car, and leather polishes, paints, and pri...展開 ADDAPT® WaxMul™ C 325 is an emulsion based on T3-type carnauba wax in water. It is used to improve scratch resistance, lubrication, as well as the release and anti-block properties. This product is used in floor, car, and leather polishes, paints, and printing inks. 收起 | |
| ADDAPT® WaxMul™ C 125 | ADDAPT Chemicals BV | ADDAPT® WaxMul™ C 125 is an emulsion based on T1-type carnauba wax in water. It is used to improve scratch resistance, repel water, and improve the release and anti-block properties. This product is used in paints, floor, car, and leather polishes, and pr...展開 ADDAPT® WaxMul™ C 125 is an emulsion based on T1-type carnauba wax in water. It is used to improve scratch resistance, repel water, and improve the release and anti-block properties. This product is used in paints, floor, car, and leather polishes, and printing inks. 收起 | |
| Luminex™ 70 A | Lawter | Luminex™ 70 A is a heatset gel vehicle that displays good solubility, gloss, transfer and lithographic performance. It also has good water balance, solvent release and a sharp dot structure. The product is suitable for use in heatset offset prints. | |
| LUBA-print 164/G | Munzing Chemie | LUBA-print 164/G is a white amide wax dispersion additive for paints and printing inks. It finds application as a aqueous lubricant and release agent. In water-based lacquers, it is used to improve slip and scratch resistance.It is also a pelletizing aid ...展開 LUBA-print 164/G is a white amide wax dispersion additive for paints and printing inks. It finds application as a aqueous lubricant and release agent. In water-based lacquers, it is used to improve slip and scratch resistance.It is also a pelletizing aid for granule-technique to improve the anti-blocking effect. 收起 | |
| SURFYNOL® SE-F | Evonik Operations GmbH, BL Coating Additives | 自乳化、非離子型潤濕劑，基於炔基二醇物質 | Request Sample |
| TEGO® Foamex 800 | Evonik Operations GmbH, BL Coating Additives | 消泡劑乳液。 | Request Sample |
| Erkazit™ 4905 E | Lawter | Erkazit™ 4905 E is a phenolic modified rosin-based resinate designed for pigment grinding in the manufacture of blue, yellow and red inks. It offers good pigment wetting, fast drying and quick solvent release features in various applications including pub...展開 Erkazit™ 4905 E is a phenolic modified rosin-based resinate designed for pigment grinding in the manufacture of blue, yellow and red inks. It offers good pigment wetting, fast drying and quick solvent release features in various applications including publication gravure and grinding varnishes. 收起 | |
| ADDITOL® WT 101 DF-S | Allnex | ADDITOL® WT 101 DF-S is a water and waste water treatment defoamer. Modified silicone defoamer emulsion (20% active). Emulsifier free technology. | Request Sample |
| TEGO® Foamex 805 N | Evonik Operations GmbH, BL Coating Additives | 消泡劑乳液。 | Request Sample |
| TEGO® Foamex 810 | Evonik Operations GmbH, BL Coating Additives | 消泡劑濃縮物。 | Request Sample |
| TEGO® Foamex 823 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 823 is a white, thixotropic liquid defoamer emulsion. It is used for waterborne architectural coatings, decorative coatings, industrial coatings, and pigmented coatings based on elastic polymer emulsions, e.g. roof tile coatings. Some special...展開 TEGO® Foamex 823 is a white, thixotropic liquid defoamer emulsion. It is used for waterborne architectural coatings, decorative coatings, industrial coatings, and pigmented coatings based on elastic polymer emulsions, e.g. roof tile coatings. Some special features of TEGO® Foamex 823 are that it can be used universally in clear and pigmented formulations, and it is highly effective, particularly for waterborne formulations. The long-term effectiveness of this product is dependent on the formulation and should be tested in the individual formulation. 收起 | Request Sample |
| Surfadol® 520 | ACME | Surfadol® 520 is a 20% active liquid nonionic molecular defoamer (Polyethylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-...展開 Surfadol® 520 is a 20% active liquid nonionic molecular defoamer (Polyethylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, and good dynamic wetting. This product is APE-free. 收起 | |
| Surfadol® 532 | ACME | Surfadol® 532 is a 32% active liquid nonionic molecular defoamer (Dipropylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-f...展開 Surfadol® 532 is a 32% active liquid nonionic molecular defoamer (Dipropylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, and good dynamic wetting. This product is APE-free. 收起 | |
| TEGO® Foamex 830 | Evonik Operations GmbH, BL Coating Additives | 消泡劑濃縮物。 | Request Sample |
| DEE FO® XRM-1537A | Munzing Chemie | DEE FO® XRM-1537A is a liquid opaque off-white defoamer that is a blend of special wax, hydrophobic silica, mineral oil and water. It is a defoamer for aqueous systems that has a unique and easily applied printing ink defoamer specifically designed for pr...展開 DEE FO® XRM-1537A is a liquid opaque off-white defoamer that is a blend of special wax, hydrophobic silica, mineral oil and water. It is a defoamer for aqueous systems that has a unique and easily applied printing ink defoamer specifically designed for press-side use. 收起 | |
| Surfadol® 550 | ACME | Surfadol® 550 is a 50% active liquid nonionic molecular defoamer (Butyl cellosolve solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-fre...展開 Surfadol® 550 is a 50% active liquid nonionic molecular defoamer (Butyl cellosolve solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, and good dynamic wetting. This product is APE-free. 收起 | |
| Surfadol® 532B | ACME | Surfadol® 532B is a 32% active liquid nonionic molecular defoamer (Butyl cellosolve solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-fr...展開 Surfadol® 532B is a 32% active liquid nonionic molecular defoamer (Butyl cellosolve solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, and good dynamic wetting. This product is APE-free. 收起 | |
| Surfadol® 550P | ACME | Surfadol® 550P is a 50% active liquid nonionic molecular defoamer (Propylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-fr...展開 Surfadol® 550P is a 50% active liquid nonionic molecular defoamer (Propylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, and good dynamic wetting. This product is APE-free. 收起 | |
| Surfadol® 518 | ACME | Surfadol® 518 is an 18% active liquid nonionic molecular defoamer (ethylene glycol and dipropylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting f...展開 Surfadol® 518 is an 18% active liquid nonionic molecular defoamer (ethylene glycol and dipropylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, and good dynamic wetting. This product is APE-free. 收起 | |
| BC 403 | Basildon Chemical Company Ltd. | BC 403 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin...展開 BC 403 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin systems, and provides lubrication and slip properties to a variety of substrates. It has a specific gravity of 1.03. 收起 | |
| Surfadol® DF-59 | ACME | Surfadol® DF-59 is a 100% active liquid nonionic molecular defoamer. It is a mixture of ethoxylated acetylenic diols that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, ...展開 Surfadol® DF-59 is a 100% active liquid nonionic molecular defoamer. It is a mixture of ethoxylated acetylenic diols that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, and good dynamic wetting. This product is solvent and APE-free. 收起 | |
| Dynoadd® F-113 | Dynoadd by Dynea | Dynoadd® F-113 is a silicone-free, flow, and leveling additive for solvent-based heat set topcoat formulations. By creating a surface layer with high cross-linking density, F-113 reduces dirt pickup and increases anti-blocking properties. Dynoadd® F-113 can improve protective film release...展開 Dynoadd® F-113 is a silicone-free, flow, and leveling additive for solvent-based heat set topcoat formulations. By creating a surface layer with high cross-linking density, F-113 reduces dirt pickup and increases anti-blocking properties. Dynoadd® F-113 can improve protective film release and, in some cases, anti-graffiti properties. Surface defects such as orange peel, craters, and popping are eliminated. 收起 | |
| TEGO® Foamex 842 | Evonik Operations GmbH, BL Coating Additives | 消泡劑 溶液. | Request Sample |
| LUBA-print 164/R | Munzing Chemie | LUBA-print 164/R is a white amide wax dispersion additive for paints and printing inks. It is used as a aqueous lubricant and release agent for water-based lacquers to improve the anti-blocking, slip and scratch resistance. Other applications include acti...展開 LUBA-print 164/R is a white amide wax dispersion additive for paints and printing inks. It is used as a aqueous lubricant and release agent for water-based lacquers to improve the anti-blocking, slip and scratch resistance. Other applications include acting as a pelletizing aid for granule technique to be used in underwater pelletizing and keeps the granules non-sticking and free-flowing. 收起 | |
| TEGO® Foamex 832 | Evonik Operations GmbH, BL Coating Additives | 不含硅樹脂的濃縮消泡劑。 | Request Sample |
