| 1,3,5-Tris[(3,3,3-trifluoropropyl)methyl] cyclotrisiloxane FD-1000 | Zhejiang Feidian Chemical Co., Ltd. | FD-1000 is a 1,3,5-Trimethyl-1,3,5-tris(3,3,3-trifluoropropyl)cyclotrisiloxane. It is supplied in white crystal form. | |
| 2,4,7,9-Tetramethyl-decyne-5-diol-4,7, TMDD | BASF SE, Intermediates Division | 水性涂料和油墨的防沫劑和潤濕劑。TMDD適用於所有水性涂料（ED涂料、水性烤漆、水性家用和牆面漆)和油墨 | |
| (3,3,3 Tri FluoroPropyl) Methyl Di-Methoxy Silane FD-1001 | Zhejiang Feidian Chemical Co., Ltd. | FD-1001 is a (3,3,3 tri fluoro propyl) methyl di-methoxy silane. It is supplied as a colorless liquid. | |
| 4-Amino-2,2,6,6-Tetramethylpiperidine (TAD) | North Wanxing Chemical Co., Ltd. | 4-Amino-2,2,6,6-Tetramethylpiperidine (TAD) is a hindered-amine light stabilizer intermediate that is a clear or yellowish liquid in appearance. This product is used to provide UV protection and stabilization in printing, paints and coatings. 4-Amino-2,2,...展開 4-Amino-2,2,6,6-Tetramethylpiperidine (TAD) is a hindered-amine light stabilizer intermediate that is a clear or yellowish liquid in appearance. This product is used to provide UV protection and stabilization in printing, paints and coatings. 4-Amino-2,2,6,6-Tetramethylpiperidine (TAD) has a boiling point of 188-189°C, gas chromatography content of 98% minimum, and a melting point of 16-18°C. 收起 | |
| 9,10-Dihydro-9-oxa-10-phosphaphenanthrene-10-oxide | Hainan Zhongxin Chemical Co., Ltd. | 9,10-Dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) is a white granule powder that is 99% pure. It is primarily used as an antibacterial agent, antioxidant, discoloration preventive and fireproofing agent. DOPO can also be used as a reactant for syn...展開 9,10-Dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) is a white granule powder that is 99% pure. It is primarily used as an antibacterial agent, antioxidant, discoloration preventive and fireproofing agent. DOPO can also be used as a reactant for synthesis of monomer and water-thinned ink compositions. 收起 | |
| 99.99% Conductive Shining Flake Silver Powder | Beijing Entrepreneur Science &Trading Co., Ltd. | 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展開 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起 | |
| 99.99% Conductive Silver Powder (Spherical) | Beijing Entrepreneur Science &Trading Co., Ltd. | 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications. | |
| A163 | Tianyi Chemical Engineering Material Co., Ltd. | A163, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 ...展開 A163, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 and 7.0. 收起 | |
| ACEMATT® 3300 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® 3300是一種氣相二氧化矽，是ACEMATT® 消光劑產品家族的一種，具有很多激動人心的優點。ACEMATT® 3300也具有附加的優點，可為柔感塗料提供一種雅致的消光表面，可提升質感，也就是眾所周知的柔軟觸感 | Request Sample |
| ACEMATT® 3400 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® 3400 is a matting agent exhibiting a multitude of exciting benefits. In solvent and waterborne coatings, the surface modification leads to an outstanding suspension behavior. In waterborne systems, there is only a minimum adsorption of associativ...展開 ACEMATT® 3400 is a matting agent exhibiting a multitude of exciting benefits. In solvent and waterborne coatings, the surface modification leads to an outstanding suspension behavior. In waterborne systems, there is only a minimum adsorption of associative thickeners resulting in improved rheology stability. Excellent transparency is obtained making it ideal for clear wood coatings, as observed by the depth of color when applied over colored substrates. 收起 | Request Sample |
| ACEMATT® 3600 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® 3600 is a high performance, very fine-grained polymer-treated precipitated silica. This product is especially developed for 100% radically curing UV-coatings obtaining films with very high surface smoothness. ACEMATT® 3600 provides a very low th...展開 ACEMATT® 3600 is a high performance, very fine-grained polymer-treated precipitated silica. This product is especially developed for 100% radically curing UV-coatings obtaining films with very high surface smoothness. ACEMATT® 3600 provides a very low thickening effect and high chemical resistance. It is particularly suitable for use in very thin or very thick UV-coating. 收起 | Request Sample |
| ACEMATT® 810 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® 810 is an untreated coarse-grained precipitated silica and is distinguished by high matting efficiency and particularly suitable for pigmented coatings systems. This product is suggested to be used in can and coil coatings, sheet coatings, and de...展開 ACEMATT® 810 is an untreated coarse-grained precipitated silica and is distinguished by high matting efficiency and particularly suitable for pigmented coatings systems. This product is suggested to be used in can and coil coatings, sheet coatings, and decorative and industrial coatings as well. ACEMATT® 810 is easily and evenly dispersed in coatings, and does not adversely affect the other application properties of coating systems. 收起 | Request Sample |
| ACEMATT® HK 125 | Evonik Operations GmbH, BL Coating Additives | ACEMATT®消光劑是高性能二氧化矽，適合各種油漆和塗料應用。ACEMATT® HK 125是一種經濟的未經處理的矽土，具有不同種類的粒徑分布，適合一般用途 | Request Sample |
| ACEMATT® HK 390 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® HK 390 is an untreated, finer grade matting agent based on precipitated silica. Providing very high compatibility it can be used in a large variety of coatings. The improved orientation in coating systems effectively prevents mottling. | Request Sample |
| ACEMATT® HK 400 | Evonik Operations GmbH, BL Coating Additives | ACEMATT®消光劑是高性能二氧化矽，適合各種油漆和塗料應用。ACEMATT® HK 400是一種通用型未經處理的消光劑。它適合所有不需要有機表面處理的應用 | Request Sample |
| ACEMATT® HK 440 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® HK 440是一種非常高效的未經處理的消光（無光）助劑。ACEMATT® HK 440設計用於需要低光澤的塗料應用例如卷鋼塗料、屋頂塗料、醇酸清漆 | Request Sample |
| ACEMATT® HK 520 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® HK 520 is an untreated, medium particle-sized precipitated silica. Providing very high compatibility it can be used in a large variety of coatings. The improved orientation in coating systems effectively prevents mottling. | Request Sample |
| ACEMATT® OK 390 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® OK 390 is a wax-treated, finer-grade matting agent based on precipitated silica. Providing very high compatibility it can be used in a large variety of coatings. | Request Sample |
| ACEMATT® OK 412 | Evonik Operations GmbH, BL Coating Additives | ACEMATT®消光劑是高性能二氧化矽，適合各種油漆和塗料應用。ACEMATT® OK 412是一種有機表面處理的易分散的消光劑，適合一般應用。該消光劑可獲取異常傑出的表面特性，以及出色的滑爽效果，也適合有色塗料。由於它具有傑出的懸浮效果，它特別適合用於透明塗料 | Request Sample |
| ACEMATT® OK 500 | Evonik Operations GmbH, BL Coating Additives | ACEMATT®消光劑是高性能二氧化矽，適合各種油漆和塗料應用。ACEMATT® OK 500是一種經有機表面處理的易分散的消光劑，適合一般應用。該消光劑具有異常傑出的表面特性以及出色的滑爽效果，也適合有色塗料。由於它具有傑出的懸浮特性，它尤其適合用於透明塗料 | Request Sample |
| ACEMATT® OK 520 | Evonik Operations GmbH, BL Coating Additives | ACEMATT®消光劑是高性能二氧化矽，適合各種油漆和塗料應用。ACEMATT® OK 520是一種易分散、經有機表面處理的消光劑，適合一般應用。該消光劑具有異常傑出的表面特性以及出色的滑爽效果，也適合有色塗料。由於它具有傑出的懸浮特性，它尤其適合用於透明塗料 | Request Sample |
| ACEMATT® OK 607 | Evonik Operations GmbH, BL Coating Additives | ACEMATT®消光劑是高性能二氧化矽，適合各種油漆和塗料應用。ACEMATT® OK 607是一種易分散、經有機表面處理的消光劑，具有非常低的平均粒徑。該消光劑具有異常傑出的表面特性以及出色的滑爽效果，也適合有色塗料。由於它具有傑出的懸浮特性，它尤其適合用於透明塗料 | Request Sample |
| ACEMATT® OK 607 LC | Evonik Operations GmbH, BL Coating Additives | ACEMATT® OK 607 LC is a very fine-grained wax after-treated precipitated silica. It is mainly used as a high-purity filler for e-coats due to its outstanding suspension behaviour and low electrical conductivity. | Request Sample |
| ACEMATT® OK 900 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® OK 900 is a highly efficient, medium particle-sized, wax-treated precipitated silica. It is especially recommended for coil coatings as well as general industrial coatings. | Request Sample |
| ACEMATT® TS 100 | Evonik Operations GmbH, BL Coating Additives | ACEMATT®消光劑是高性能二氧化矽，適合各種油漆和塗料應用。ACEMATT® TS 100是一種熱的未經處理的消光劑。ACEMATT® TS 100的特征是它的傑出的消光效率和透明度 | Request Sample |
| Acetine 51035 | Rhein Chemie Rheinau GmbH | Acetine 51035 is glycerol triacetate appearing as a clear liquid. This acetate ester functions as a solvent and plasticizer in inks and printing inks. | |
| Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
| Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展開 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起 | |
| ACURE™ 500 | Allnex | ACURE™ 500 is the first generation of blocked catalyst used in ACURE™ systems. ACURE™ 500 consists of a strong base which is blocked with di-ethyl carbonate. ACURE™ 500 unblocks with the release of alcohol and CO2 and is the key enabler to the provision o...展開 ACURE™ 500 is the first generation of blocked catalyst used in ACURE™ systems. ACURE™ 500 consists of a strong base which is blocked with di-ethyl carbonate. ACURE™ 500 unblocks with the release of alcohol and CO2 and is the key enabler to the provision of fast dry times with long pot lives in ACURE™ coatings. The rate at which ACURE™ 500 unblocks may be controlled by the addition of an alcohol (typically ethanol, n-propanol, or n-butanol) to the ACURE™ coating. 收起 | Request Sample |
| ADDAPT® Anticor™ A40 | ADDAPT Chemicals BV | ADDAPT® Anticor™ A40 is a proprietary blend of polyhydroxy amides. It is used as a water-soluble multi-metal anti-corrosion additive in coatings, printing inks, lubricants, textile fluids, and cleaners. This product is completely soluble in water, biodegr...展開 ADDAPT® Anticor™ A40 is a proprietary blend of polyhydroxy amides. It is used as a water-soluble multi-metal anti-corrosion additive in coatings, printing inks, lubricants, textile fluids, and cleaners. This product is completely soluble in water, biodegradable, and is not restricted by the hardness of the water. 收起 | |
| ADDAPT® Anticor™ A65N | ADDAPT Chemicals BV | ADDAPT® Anticor™ A65N is a proprietary blend of organic acids salts and silanes. It is used as a water-soluble multi-metal anti-corrosion additive in coatings, printing inks, lubricants, textile fluids, and cleaners. This product controls the amount of pi...展開 ADDAPT® Anticor™ A65N is a proprietary blend of organic acids salts and silanes. It is used as a water-soluble multi-metal anti-corrosion additive in coatings, printing inks, lubricants, textile fluids, and cleaners. This product controls the amount of pitting on the metal surface, is biodegradable, and is not restricted by the hardness of the water. 收起 | |
| ADDAPT® Anticor™ A84 | ADDAPT Chemicals BV | ADDAPT® Anticor™ A84is a proprietary blend of organic acid salts and silanes. It is used as a multi-metal anti-corrosion additive and helps control the pitting on the metal surface. This product is biodegradable, completely soluble in water, and not restr...展開 ADDAPT® Anticor™ A84is a proprietary blend of organic acid salts and silanes. It is used as a multi-metal anti-corrosion additive and helps control the pitting on the metal surface. This product is biodegradable, completely soluble in water, and not restricted by the hardness of the water. It is used in coatings, printing inks, lubricants, textile fluids, and cleaners. 收起 | |
| ADDAPT® Anticor™ L 4783 | ADDAPT Chemicals BV | ADDAPT® Anticor™ L 4783 is a proprietary blend of polyhydroxycarbonate and silanes. It is used as a multi-metal anti-corrosion additive in coatings, printing inks, lubricants, textile fluids, and cleaners. This product is non-foaming, biodegradable, solub...展開 ADDAPT® Anticor™ L 4783 is a proprietary blend of polyhydroxycarbonate and silanes. It is used as a multi-metal anti-corrosion additive in coatings, printing inks, lubricants, textile fluids, and cleaners. This product is non-foaming, biodegradable, soluble in water, and is not restricted by the hardness of water. 收起 | |
| ADDAPT® AS 400 | ADDAPT Chemicals BV | ADDAPT® AS 400 is an acrylic copolymer based emulsion in water. It is used as an emulsion rheology modifier in paints, adhesives, printing inks, and paper coatings. | |
| ADDAPT® BioWet™ 200R | ADDAPT Chemicals BV | ADDAPT® BioWet™ 200R is a polyhydroxy amide in water. It is used as a compatibilizer and pigment dispersant in coatings and printing inks. This product is solvent-free, biodegradable, non-foaming, and improves pigment grinding. | |
| ADDAPT® BioWet™ 25 | ADDAPT Chemicals BV | ADDAPT® BioWet™ is a polyhydroxy amide in water. It is used as a solvent-free wetting agent for paints, coatings, lacquers, adhesives, printing inks, and cleaning agents. This product is non-foaming, biodegradable, and it improves pigment grinding. | |
| ADDAPT® BioWet™ 35 | ADDAPT Chemicals BV | ADDAPT® BioWet™ 35 is a blend of polyalkylene glycols, dispersants, and polyhydroxy amide. It is used as a wetting/leveling agent in paints, coatings, lacquers, adhesives, printing inks, and cleaning agents. This product is biodegradable, solvent-free, no...展開 ADDAPT® BioWet™ 35 is a blend of polyalkylene glycols, dispersants, and polyhydroxy amide. It is used as a wetting/leveling agent in paints, coatings, lacquers, adhesives, printing inks, and cleaning agents. This product is biodegradable, solvent-free, non-foaming, and it improves pigment grinding. 收起 | |
| ADDAPT® BioWet™ 45 | ADDAPT Chemicals BV | ADDAPT® BioWet™ is a blend of polyalkylene glycols and polyhydroxy amide. It is used as a wetting/leveling agent for paints, coatings, lacquers, adhesives, printing inks, and cleaning agents. This product is solvent-free, biodegradable, and it improves pi...展開 ADDAPT® BioWet™ is a blend of polyalkylene glycols and polyhydroxy amide. It is used as a wetting/leveling agent for paints, coatings, lacquers, adhesives, printing inks, and cleaning agents. This product is solvent-free, biodegradable, and it improves pigment grinding. 收起 | |
| ADDAPT® BioWet™ 450C | ADDAPT Chemicals BV | ADDAPT® BioWet™ 450C is a proprietary blend of polyalkylene glycols in water and surface-active compounds. It is used as a VOC-free wetting agent in paints, coatings, adhesives, printing inks, and cleaning agents. This product is biodegradable, low-foamin...展開 ADDAPT® BioWet™ 450C is a proprietary blend of polyalkylene glycols in water and surface-active compounds. It is used as a VOC-free wetting agent in paints, coatings, adhesives, printing inks, and cleaning agents. This product is biodegradable, low-foaming, completely soluble in water, and improves pigment grinding. 收起 | |
| ADDAPT® BioWet™ 60G | ADDAPT Chemicals BV | ADDAPT® BioWet™ 60G is a proprietary blend of polyalkylene glycols and polyhydroxy amide. It is used as a solvent-free glass adhesion promoter and glass corrosion inhibitor. This product is used in coatings, printing inks, and cleaning agents. BioWet 60G ...展開 ADDAPT® BioWet™ 60G is a proprietary blend of polyalkylene glycols and polyhydroxy amide. It is used as a solvent-free glass adhesion promoter and glass corrosion inhibitor. This product is used in coatings, printing inks, and cleaning agents. BioWet 60G is non-foaming, biodegradable, and completely soluble in water. 收起 | |
| ADDAPT® BioWet™ 75 | ADDAPT Chemicals BV | ADDAPT® BioWet™ 75 is a polyhydroxy amide in water. It is used as a biodegradable wetting and leveling agent for coatings, lacquers, printing inks, adhesives, and cleaning agents. This product is non-foaming, improves pigment grinding, and has anti-corros...展開 ADDAPT® BioWet™ 75 is a polyhydroxy amide in water. It is used as a biodegradable wetting and leveling agent for coatings, lacquers, printing inks, adhesives, and cleaning agents. This product is non-foaming, improves pigment grinding, and has anti-corrosion properties. 收起 | |
| ADDAPT® CODIS™ 95 | ADDAPT Chemicals BV | ADDAPT® CODIS™ 95 is a proprietary blend of alkanol-amines in water. It is used as a co-dispersant for mineral pigments, fillers, colorants, and solvent based alkyd paints. This product contributes to pH stability and provides high gloss, water resistance...展開 ADDAPT® CODIS™ 95 is a proprietary blend of alkanol-amines in water. It is used as a co-dispersant for mineral pigments, fillers, colorants, and solvent based alkyd paints. This product contributes to pH stability and provides high gloss, water resistance, and anti-corrosion properties. 收起 | |
| ADDAPT® DISP™ 400 | ADDAPT Chemicals BV | ADDAPT® DISP™ 400 is a low molecular weight polyacrylate dispersant with a sodium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows high pigment loading at a low viscosity. This product has applications in pai...展開 ADDAPT® DISP™ 400 is a low molecular weight polyacrylate dispersant with a sodium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows high pigment loading at a low viscosity. This product has applications in paint, printing ink, adhesives, paper coatings, and concrete. 收起 | |
| ADDAPT® DISP™ 500 | ADDAPT Chemicals BV | ADDAPT® DISP™ 500 is a low molecular weight polyacrylate dispersant with an ammonium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows for high pigment loading at a low viscosity. This product has applications...展開 ADDAPT® DISP™ 500 is a low molecular weight polyacrylate dispersant with an ammonium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows for high pigment loading at a low viscosity. This product has applications in paint, printing ink, adhesives, paper coatings, and concrete. 收起 | |
| ADDAPT® DISP™ 600 | ADDAPT Chemicals BV | ADDAPT® DISP™ 600 is a low molecular weight polyacrylate dispersant with a sodium cation. It is used as a solvent-free dispersant for titanium dioxide, mineral pigments, fillers, colorants, and reactive pigments. This product is used in paint, printing in...展開 ADDAPT® DISP™ 600 is a low molecular weight polyacrylate dispersant with a sodium cation. It is used as a solvent-free dispersant for titanium dioxide, mineral pigments, fillers, colorants, and reactive pigments. This product is used in paint, printing ink, adhesives, paper coatings, and concrete. 收起 | |
| ADDAPT® DISP™ 800 | ADDAPT Chemicals BV | ADDAPT® DISP™ 800 is a low molecular weight polyacrylate dispersant with a sodium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows for high pigment loading at a low viscosity. This product has applications in...展開 ADDAPT® DISP™ 800 is a low molecular weight polyacrylate dispersant with a sodium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows for high pigment loading at a low viscosity. This product has applications in paint, printing ink, adhesives, textiles, and concrete. 收起 | |
| ADDAPT® DISP™ 900 | ADDAPT Chemicals BV | ADDAPT® DISP™ 900 is a low molecular weight polyacrylate dispersant with an ammonium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows for high pigment loading at a low viscosity. This product has applications...展開 ADDAPT® DISP™ 900 is a low molecular weight polyacrylate dispersant with an ammonium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows for high pigment loading at a low viscosity. This product has applications in paint, printing ink, adhesives, textiles, and concrete. 收起 | |
| ADDAPT® Foamstop™ 100N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ 100N is a proprietary blend of polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is a light yellow liquid and is completely soluble in water, usab...展開 ADDAPT® Foamstop™ 100N is a proprietary blend of polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is a light yellow liquid and is completely soluble in water, usable over a wide pH range, biodegradable, and it does not contain mineral oil, amines, nitrates, or fluorides. 收起 | |
| ADDAPT® Foamstop™ 150N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ 150N is a proprietary blend of polyacrylates, PAGs, and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is biodegradable, completely soluble in water, and is effective ...展開 ADDAPT® Foamstop™ 150N is a proprietary blend of polyacrylates, PAGs, and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is biodegradable, completely soluble in water, and is effective over a wide pH range. 收起 | |
| ADDAPT® Foamstop™ 200N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ 200N is a proprietary blend of esters and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely soluble in water, effective over a wide pH range, and biodegrada...展開 ADDAPT® Foamstop™ 200N is a proprietary blend of esters and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely soluble in water, effective over a wide pH range, and biodegradable. 收起 | |
| ADDAPT® Foamstop™ 400F | ADDAPT Chemicals BV | ADDAPT® Foamstop™ 400F is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely water soluble, biodegradable, and is effective over...展開 ADDAPT® Foamstop™ 400F is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely water soluble, biodegradable, and is effective over a wide pH range, including extreme pH values (less than 3 or greater than 10). 收起 | |
| ADDAPT® Foamstop™ 400N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ 400N is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely water soluble, biodegradable, and is effective over...展開 ADDAPT® Foamstop™ 400N is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely water soluble, biodegradable, and is effective over a wide pH range, including formulations with extreme pH values (less than 3 or greater than 10). 收起 | |
| ADDAPT® Foamstop™ 600N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ 600N is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely soluble in water, biodegradable, effective over a w...展開 ADDAPT® Foamstop™ 600N is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely soluble in water, biodegradable, effective over a wide pH range, and it does not contain mineral oil, amines, nitrates, or fluorides. 收起 | |
| ADDAPT® Foamstop™ 666K | ADDAPT Chemicals BV | ADDAPT® Foamstop™ 666K is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely soluble in water, biodegradable, and is effective o...展開 ADDAPT® Foamstop™ 666K is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely soluble in water, biodegradable, and is effective over a wide pH range and a high temperature range. 收起 | |
| ADDAPT® Foamstop™ CC 11 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ CC 11 is a proprietary blend of activated fatty acids and fatty alcohols. It is used as a foam control agent for emulsions based on PVAC, VA/VEOVA, Styrene/Acrylics or pure Acrylics. This product has applications in adhesives, paint, pri...展開 ADDAPT® Foamstop™ CC 11 is a proprietary blend of activated fatty acids and fatty alcohols. It is used as a foam control agent for emulsions based on PVAC, VA/VEOVA, Styrene/Acrylics or pure Acrylics. This product has applications in adhesives, paint, printing ink, floor polish, and waste-water treatment. 收起 | |
| ADDAPT® Foamstop™ EM 19 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ EM 19 is an emulsion of surface active components and mineral oil in water. It is used as a foam control agent for emulsion systems based on PVAC, VA/VEOVA, Styrene/Acrylics, or pure Acrylics. This product has applications in adhesives, ...展開 ADDAPT® Foamstop™ EM 19 is an emulsion of surface active components and mineral oil in water. It is used as a foam control agent for emulsion systems based on PVAC, VA/VEOVA, Styrene/Acrylics, or pure Acrylics. This product has applications in adhesives, paint, printing ink, floor polish, and waste-water treatment. 收起 | |
| ADDAPT® Foamstop™ MP 33 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ MP 33 is a proprietary blend of polyalkyleneglycols and siloxane based surface-active components. It is used as a foam control agent in paint, printing ink, PVC production, textiles, and lubricants. | |
| ADDAPT® Foamstop™ MP 51N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ MP 51N is a proprietary blend of activated white oils. It is used as a foam control agent in low VOC emulsions based on PVAC, Styrene/Acrylics, or pure Acrylics. This product has applications in paint, adhesives, printing ink, floor poli...展開 ADDAPT® Foamstop™ MP 51N is a proprietary blend of activated white oils. It is used as a foam control agent in low VOC emulsions based on PVAC, Styrene/Acrylics, or pure Acrylics. This product has applications in paint, adhesives, printing ink, floor polish, lubricants, and waste-water treatment. 收起 | |
| ADDAPT® Foamstop™ MP 55 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ MP 55 is a proprietary blend of siloxane based surface-active components. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is effective over a wide pH range an...展開 ADDAPT® Foamstop™ MP 55 is a proprietary blend of siloxane based surface-active components. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is effective over a wide pH range and is used in paint, printing ink, PVC production, textiles, and lubricants. 收起 | |
| ADDAPT® Foamstop™ MP 72 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ MP 72 is a proprietary blend of synthetic ester, biodegradable polyalkylene glycols and a small amount of aliphatic alcohols. It is used as a foam control agent in low-VOC emulsions based on PVAC, Styrene/Acrylics or pure Acrylics. This ...展開 ADDAPT® Foamstop™ MP 72 is a proprietary blend of synthetic ester, biodegradable polyalkylene glycols and a small amount of aliphatic alcohols. It is used as a foam control agent in low-VOC emulsions based on PVAC, Styrene/Acrylics or pure Acrylics. This product is used in paint, adhesives, printing inks, floor polish, lubricants, and waste-water treatment. 收起 | |
| ADDAPT® Foamstop™ MP 92 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ MP 92 is a proprietary blend of polyalkylene glycols and siloxane based surface-active components. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is effectiv...展開 ADDAPT® Foamstop™ MP 92 is a proprietary blend of polyalkylene glycols and siloxane based surface-active components. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is effective over a wide pH range and is used in paint, printing ink, PVC production, food processing, and lubricants. 收起 | |
| ADDAPT® Foamstop™ SL 10 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ SL 10 is a silicone emulsion containing minerals and fatty acid based emulsifiers. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is a milky white liquid tha...展開 ADDAPT® Foamstop™ SL 10 is a silicone emulsion containing minerals and fatty acid based emulsifiers. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is a milky white liquid that is easily emulsifiable and is used in paint, printing ink, adhesives, and sewage treatment, among other applications. 收起 | |
| ADDAPT® Foamstop™ SL 100 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ SL 100 is a silicone compound containing minerals. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product disperses easily and is used in paint, printing ink, cuttin...展開 ADDAPT® Foamstop™ SL 100 is a silicone compound containing minerals. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product disperses easily and is used in paint, printing ink, cutting oils, and epoxy resin systems. 收起 | |
| ADDAPT® Foamstop™ SL 30 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ SL 30 is a silicone emulsion containing minerals and fatty acid based emulsifiers. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is used in paint, printing ...展開 ADDAPT® Foamstop™ SL 30 is a silicone emulsion containing minerals and fatty acid based emulsifiers. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is used in paint, printing ink, adhesives, and sewage treatment, among other applications. 收起 | |
| ADDAPT® Foamstop™ VF 10N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ VF 10N is a proprietary blend of components based on renewable resources. It is used as a VOC-free foam control agent for low-VOC emulsions based on PVAC, Styrene/Acrylics and pure Acrylics. This product is used in paint, adhesives, prin...展開 ADDAPT® Foamstop™ VF 10N is a proprietary blend of components based on renewable resources. It is used as a VOC-free foam control agent for low-VOC emulsions based on PVAC, Styrene/Acrylics and pure Acrylics. This product is used in paint, adhesives, printing ink, floor polish, lubricants, and waste-water treatment. 收起 | |
| ADDAPT® Foamstop™ WS 17 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ WS 17 is a proprietary blend of polyalkylene glycols and surface-active components. It is a biodegradable foam control agent designed for formulations with extreme pH values. This product is completely water soluble and is used in paint,...展開 ADDAPT® Foamstop™ WS 17 is a proprietary blend of polyalkylene glycols and surface-active components. It is a biodegradable foam control agent designed for formulations with extreme pH values. This product is completely water soluble and is used in paint, printing ink, floor polish, and other applications. 收起 | |
| ADDAPT® PolySurF™ ACE | ADDAPT Chemicals BV | ADDAPT® PolySurF™ ACE is the acrylic acid adduct of the epoxy ester of versatic acid. It is used as a solvent free additive in paints, lacquers, printing inks, and adhesives to provide benefits such as acid resistance, high gloss, pigment wetting, and UV ...展開 ADDAPT® PolySurF™ ACE is the acrylic acid adduct of the epoxy ester of versatic acid. It is used as a solvent free additive in paints, lacquers, printing inks, and adhesives to provide benefits such as acid resistance, high gloss, pigment wetting, and UV stability. 收起 | |
| ADDAPT® PolySurF™ HP | ADDAPT Chemicals BV | ADDAPT® PolySurF™ HP is a proprietary mixture of methacrylated mono-phosphate and bi-phosphate esters. It is used as a solvent-free UV-curable additive, adhesion promoter, and flame retardant. This product has applications in paints, lacquers, printing in...展開 ADDAPT® PolySurF™ HP is a proprietary mixture of methacrylated mono-phosphate and bi-phosphate esters. It is used as a solvent-free UV-curable additive, adhesion promoter, and flame retardant. This product has applications in paints, lacquers, printing inks, and adhesives. 收起 | |
| ADDAPT® PolySurF™ HPH | ADDAPT Chemicals BV | ADDAPT® PolySurF™ HPH is a proprietary mixture of methacrylated mono-phosphate and di-phosphate esters. It is used as a solvent-free UV-curable additive in paints, lacquers, printing inks, and adhesives. This product also improves the adhesion to metal an...展開 ADDAPT® PolySurF™ HPH is a proprietary mixture of methacrylated mono-phosphate and di-phosphate esters. It is used as a solvent-free UV-curable additive in paints, lacquers, printing inks, and adhesives. This product also improves the adhesion to metal and has flame retardant properties. 收起 | |
| ADDAPT® PolySurF™ HPL | ADDAPT Chemicals BV | ADDAPT® PolySurF™ HPL is a proprietary mixture of methacrylated monophosphate and diphosphate esters. It is used as a solvent-free UV-curable additive, adds leveling and wetting properties, acts as a flame retardant, and improves adhesion to metal. This p...展開 ADDAPT® PolySurF™ HPL is a proprietary mixture of methacrylated monophosphate and diphosphate esters. It is used as a solvent-free UV-curable additive, adds leveling and wetting properties, acts as a flame retardant, and improves adhesion to metal. This product is used in paints, lacquers, printing inks, and adhesives. 收起 | |
| ADDAPT® PolySurF™ HPm | ADDAPT Chemicals BV | ADDAPT® PolySurF™ HPm is a proprietary mixture of methacrylated monophosphate and diphosphate esters. It is used as a solvent free UV-curable additive and acts as an effective flame retardant while also promoting adhesion to metal, glass, and concrete.Thi...展開 ADDAPT® PolySurF™ HPm is a proprietary mixture of methacrylated monophosphate and diphosphate esters. It is used as a solvent free UV-curable additive and acts as an effective flame retardant while also promoting adhesion to metal, glass, and concrete.This product is used in paints, lacquers, printing inks, and adhesives. 收起 | |
| ADDAPT® WaxMul™ C 125 | ADDAPT Chemicals BV | ADDAPT® WaxMul™ C 125 is an emulsion based on T1-type carnauba wax in water. It is used to improve scratch resistance, repel water, and improve the release and anti-block properties. This product is used in paints, floor, car, and leather polishes, and pr...展開 ADDAPT® WaxMul™ C 125 is an emulsion based on T1-type carnauba wax in water. It is used to improve scratch resistance, repel water, and improve the release and anti-block properties. This product is used in paints, floor, car, and leather polishes, and printing inks. 收起 | |
| ADDAPT® WaxMul™ C 325 | ADDAPT Chemicals BV | ADDAPT® WaxMul™ C 325 is an emulsion based on T3-type carnauba wax in water. It is used to improve scratch resistance, lubrication, as well as the release and anti-block properties. This product is used in floor, car, and leather polishes, paints, and pri...展開 ADDAPT® WaxMul™ C 325 is an emulsion based on T3-type carnauba wax in water. It is used to improve scratch resistance, lubrication, as well as the release and anti-block properties. This product is used in floor, car, and leather polishes, paints, and printing inks. 收起 | |
| ADDAPT® WaxMul™ WM 110 | ADDAPT Chemicals BV | ADDAPT® WaxMul™ WM 110 in paints, printing inks, leather polishes, and paper coatings to improve water resistance and surface smoothness. | |
| ADDAPT® WaxMul™ WM 25 | ADDAPT Chemicals BV | ADDAPT® WaxMul™ WM 25 is an emulsion of polyethylene wax in water. It is used in paints, printing inks, and paper coatings. This product provides high abrasion resistance, improves wet scrub resistance, helps retain gloss, improves dry rub, and is suitabl...展開 ADDAPT® WaxMul™ WM 25 is an emulsion of polyethylene wax in water. It is used in paints, printing inks, and paper coatings. This product provides high abrasion resistance, improves wet scrub resistance, helps retain gloss, improves dry rub, and is suitable as a slip agent for over print varnishes. 收起 | |
| ADDAPT® WaxMul™ WM 35 | ADDAPT Chemicals BV | ADDAPT® WaxMul™ WM 35 is an emulsion of polyethylene wax in water. It is used in paints, printing inks, floor polishes, and paper coatings. This product improves abrasion resistance and wet scrub resistance. | |
| ADDAPT® WaxMul™ WM 45 | ADDAPT Chemicals BV | ADDAPT® WaxMul™ WM 45 is an emulsion of polypropylene wax in water. It is used in floor polishes, printing inks, and paints. This product has a high melting point, and it improves abrasion resistance, wet scrub resistance, surface hardness, and blocking r...展開 ADDAPT® WaxMul™ WM 45 is an emulsion of polypropylene wax in water. It is used in floor polishes, printing inks, and paints. This product has a high melting point, and it improves abrasion resistance, wet scrub resistance, surface hardness, and blocking resistance. 收起 | |
| Addaptol™ DB | ADDAPT Chemicals BV | Addaptol™ DB is a proprietary mixture of branched esters of dibasic acids. It is a biodegradable, oxygenated solvent used in waterborne systems as a coalescing agent and in solvent borne systems as a tail solvent. When compared to 2,2,4-Trimethylpentanedi...展開 Addaptol™ DB is a proprietary mixture of branched esters of dibasic acids. It is a biodegradable, oxygenated solvent used in waterborne systems as a coalescing agent and in solvent borne systems as a tail solvent. When compared to 2,2,4-Trimethylpentanediol mono-isobutyrate, Addaptol™ DB has less odor, improved wet scrub resistance, and improved leveling and pinhole resistance. 收起 | |
| ADDID® 900 | Evonik Operations GmbH, BL Coating Additives | 二氨基官能三甲氧基硅烷增粘劑。 | Request Sample |
| ADDID® 911 | Evonik Operations GmbH, BL Coating Additives | ADDID® 911 is an adhesion promoter for solventborne and waterborneprimers and coating formulations. It is based on an epoxy-functional silane. | Request Sample |
| ADDITOL® AQ-1680 | Allnex | ADDITOL® AQ 1680 - rheology additive - is an associative acrylic thickener soluble alkali for use in aqueous type mass systems. It has high thickening power, is compatible with acrylic and cellulosic thickeners, enables the formation of thick bodies witho...展開 ADDITOL® AQ 1680 - rheology additive - is an associative acrylic thickener soluble alkali for use in aqueous type mass systems. It has high thickening power, is compatible with acrylic and cellulosic thickeners, enables the formation of thick bodies without syneresis, has great stability, and is a high-solids system. 收起 | Request Sample |
| ADDITOL® AQ-1681 | Allnex | ADDITOL® AQ 1681 - rheology additive - is an associative acrylic thickener, alkali-soluble, with medium thickening power for use in styrenated acrylic waterborne paints. It is recommended for use in paints, sealants, background preparers, varnishes and w...展開 ADDITOL® AQ 1681 - rheology additive - is an associative acrylic thickener, alkali-soluble, with medium thickening power for use in styrenated acrylic waterborne paints. It is recommended for use in paints, sealants, background preparers, varnishes and waterproofing. 收起 | Request Sample |
| ADDITOL® BDK | Allnex | ADDITOL® BDK is a general-purpose radical photoinitiator that can be used alone or in combination with other photoinitiators. It is used in formulations containing unsaturated materials such as acrylates, methacrylates, vinyls and unsaturated polyesters. ...展開 ADDITOL® BDK is a general-purpose radical photoinitiator that can be used alone or in combination with other photoinitiators. It is used in formulations containing unsaturated materials such as acrylates, methacrylates, vinyls and unsaturated polyesters. With exposure to UV light, ADDITOL® BDK undergoes a photochemical reaction that generates radicals. 收起 | Request Sample |
| ADDITOL® CPK | Allnex | ADDITOL® CPK is a radical photoinitiator that can be used alone or in combination with other photoinitiators. It is used in formulations containing unsaturated materials such as acrylates, methacrylates, vinyls and unsaturated polyesters. With exposure to...展開 ADDITOL® CPK is a radical photoinitiator that can be used alone or in combination with other photoinitiators. It is used in formulations containing unsaturated materials such as acrylates, methacrylates, vinyls and unsaturated polyesters. With exposure to UV light, ADDITOL® CPK undergoes a photochemical reaction that generates radicals. These radicals will initiate polymerization through the unsaturated groups present in the system. Suggested applications for ADDITOL® CPK include: paper upgrading, wood top-coats, hard-coats for plastics, overprint varnishes, vinyl flooring, metal coatings, exterior applications, general coating applications where low yellowing is critical, and inks and pigmented coatings (in combination with other photoinitiators). 收起 | Request Sample |
| ADDITOL® dry CF100 | Allnex | ADDITOL® dry CF100 - drier/dryer/siccative - is a ready to use, universal Cobalt replacement drier designed to have excellent compatibility and fast incorporation in all solvent borne and waterborne alkyd paints. It is based on twin accelerated Manganese. | Request Sample |
| ADDITOL® dry CF103 | Allnex | ADDITOL® Dry CF103 is a cobalt free (Co-free) accelerated primary drier based on Manganese (Mn). High performance set and through drying in alkyd paints, stains, natural oils and printing inks. Universal compatible in solvent borne (SB) and water based (W...展開 ADDITOL® Dry CF103 is a cobalt free (Co-free) accelerated primary drier based on Manganese (Mn). High performance set and through drying in alkyd paints, stains, natural oils and printing inks. Universal compatible in solvent borne (SB) and water based (WB) oxidative drying systems. Allows leveling without strong wrinkling tendency. Solvent free, ultra low VOC, high flash point (FP) for high handling safety. Long lasting drying performance with strongly reduces loss of dry effect. 收起 | Request Sample |
| ADDITOL® dry CF200 | Allnex | ADDITOL® Dry CF200 contains a balanced auxiliary drier metal combination which optimizes oxidative drying in waterborne alkyd formulations. It is recommended to be used together with Cobalt free primary driers ADDITOL® Dry CF 100 or ADDITOL® Dry CF 101 fo...展開 ADDITOL® Dry CF200 contains a balanced auxiliary drier metal combination which optimizes oxidative drying in waterborne alkyd formulations. It is recommended to be used together with Cobalt free primary driers ADDITOL® Dry CF 100 or ADDITOL® Dry CF 101 for all oxidative drying waterborne alkyd resin paints. 收起 | Request Sample |
| ADDITOL® dry CF300 | Allnex | ADDITOL® Dry CF300 contains a balanced auxiliary drier metal combination which optimizes oxidative drying in waterborne and solventborne alkyd formulations.. It is recommended to be used together with Cobalt free primary driers ADDITOL® Dry CF 100 for all...展開 ADDITOL® Dry CF300 contains a balanced auxiliary drier metal combination which optimizes oxidative drying in waterborne and solventborne alkyd formulations.. It is recommended to be used together with Cobalt free primary driers ADDITOL® Dry CF 100 for all oxidative drying waterborne alkyd resin paints. 收起 | Request Sample |
| ADDITOL® P 791 | Allnex | 固體脂肪族聚酸酐固化劑，結合含縮水甘油基的固體丙烯酸樹脂制備粉末涂料。基料比例與所採用縮水甘油基樹脂的當量有關。適合丙烯酸應用 | Request Sample |
| ADDITOL® P 824 | Allnex | 流平促進母料，用於粉末涂料。在戶外耐候羥基聚酯基體中含有15％的活性劑。用於要求光澤和流平的應用場合 | Request Sample |
| ADDITOL® P 891 | Allnex | ADDITOL® P 891 is a flow promoter masterbatch suitable for use in clear powder coatings. ADDITOL® P 891 contains approximately 5% active substance in an outdoor resistant carboxylated polyester matrix.The addition of 7-10% on binder is suggested for the m...展開 ADDITOL® P 891 is a flow promoter masterbatch suitable for use in clear powder coatings. ADDITOL® P 891 contains approximately 5% active substance in an outdoor resistant carboxylated polyester matrix.The addition of 7-10% on binder is suggested for the manufacture of haze-free clear coatings with very good flow. 收起 | Request Sample |
| ADDITOL® P 896 | Allnex | 流平促進母料，適用於有色粉末涂料。 | Request Sample |
| ADDITOL® P 920 | Allnex | 催化劑母料，設計用於制造皺紋效果。在羥基聚酯基體中含有5％的活性物質。適合需要皺紋表面效果的應用 | Request Sample |
| ADDITOL® P 932 | Allnex | ADDITOL® P 932 is an aliphatic urethane pre-polymer crosslinking agent for use with hydroxyl terminated polyester resins for the manufacture of polyurethane powder coatings. | Request Sample |
| ADDITOL® P 950 | Allnex | 具有摩擦帶電活性的母料，用於混合型，TGIC型，聚氨酯型和TGIC替換體系。戶內戶外均可使用 | Request Sample |
| ADDITOL® P 963 | Allnex | ADDITOL® P 963 is a catalyst masterbatch to be used in hybrid, TGIC or ARALDITE® PT-910 systems. ADDITOL® P 963 contains 5 % active substance and has been designed for indoor and outdoor use. ADDITOL® P 963 is easily handled and greatly improves dispersio...展開 ADDITOL® P 963 is a catalyst masterbatch to be used in hybrid, TGIC or ARALDITE® PT-910 systems. ADDITOL® P 963 contains 5 % active substance and has been designed for indoor and outdoor use. ADDITOL® P 963 is easily handled and greatly improves dispersion of the catalyst in powder coating formulations. 收起 | Request Sample |
| ADDITOL® P 964 | Allnex | 催化劑母料，設計用於混合型、TGIC或Araldite PT-910體系 | Request Sample |
| ADDITOL® P 965 | Allnex | 一種芳香族氨基甲酸酯加合物，用作羥基聚酯樹脂交聯劑，用於制備聚氨酯粉末塗料 | Request Sample |
| ADDITOL® P 966 | Allnex | ADDITOL® P 966 is a catalyst masterbatch for use in TGIC or ARALDITE® PT-910 systems. This resin contains 5% active ingredient in a superdurable polyester resin matrix. ADDITOL® P 966 is easily handled and greatly improves dispersion of the catalyst in po...展開 ADDITOL® P 966 is a catalyst masterbatch for use in TGIC or ARALDITE® PT-910 systems. This resin contains 5% active ingredient in a superdurable polyester resin matrix. ADDITOL® P 966 is easily handled and greatly improves dispersion of the catalyst in powder coating formulations when mixed with superdurable resins. This material can also be used with CRYLCOAT® 4420-0 and CRYLCOAT® 4430-0 at varying levels in dry-blend systems to achieve adjustable low gloss values. 收起 | Request Sample |
| ADDITOL® TPO | Allnex | ADDITOL TPO是一種自由基光引發劑，可單獨使用或結合其它光引發劑使用。它可用於引發含不飽和基團的材料，例如丙烯酸酯、甲基丙烯酸酯、乙烯基和不飽和聚酯。接觸到紫外線，ADDITOL TPO會進行光化學反應產生自由基。這些自由基會引發體系中存在的不飽和基團進行聚合 | Request Sample |
