| CAB-O-SIL® PTG | Univar Solutions | CAB-O-SIL® PTG is a medium-surface area of untreated fumed silica that is suitable for use in the thickening of unsaturated polyester resins. It enables thickening, thixotropic (shear-thinning), and anti-settling behavior in unsaturated polyester resins. ...展開 CAB-O-SIL® PTG is a medium-surface area of untreated fumed silica that is suitable for use in the thickening of unsaturated polyester resins. It enables thickening, thixotropic (shear-thinning), and anti-settling behavior in unsaturated polyester resins. This thixotropic behavior enables good penetration of the resin into the matrix during application and prevents dripping. 收起 | Request Sample |
| RHEOBYK-7410 CA | BYK | RHEOBYK-7410 CA is a liquid rheology additive to produce a highly thixotropic flow behavior for medium-polar solvent-borne and solvent-free systems. | |
| CLAYTONE-VP V | BYK | CLAYTONE-VP V is a powdered rheology additive based on an organophilic phyllosilicate for non-polar to medium-polar systems to produce a thixotropic flow behavior. | |
| RHEOBYK-7420 CA | BYK | RHEOBYK-7420 CA is a liquid rheology additive to produce thixotropic flow behavior in aqueous and highly polar systems for improving anti-sagging and anti-settling properties. | |
| RHEOBYK-7420 ET | BYK | RHEOBYK-7420 ET is a liquid rheology additive to generate thixotropic flow behavior in aqueous and highly polar systems to improve the anti-sagging and anti-settling properties. | |
| Thixol™ 50 S | Arkema Rheology & Specialty Additives | Thixol™ 50 S is a liquid acrylic self-associative thickener providing a thixotropic rheological profile to water-based systems, preventing them from settling and sagging without affecting leveling properties. | Request Sample |
| LAPONITE B | BYK | LAPONITE B is a synthetic layered fluorosilicate. It is insoluble in water but hydrates and swells to give translucent, colorless colloidal dispersions. At 2 % concentration in water, highly thixotropic gels are obtained. | |
| RHEOBYK-7411 CA | BYK | RHEOBYK-7411 CA is a liquid rheology additive for low-polarity solvent-borne and solvent-free systems to produce a highly thixotropic flow behavior and to improve anti-sagging and anti-settling properties. | |
| Cimsil G50 | Tolsa, S.A. | Cimsil G50 is a thixotropic and shear thinning additive. It is developed as an anti-sagging agent in gypsum systems. It can be used for gypsum spray plasters, gypsum compounds, and gypsum based adhesives. | |
| CHS-Alkyd ST 551 N 50 | Spolchemie | CHS-Alkyd ST 551 N 50 is a binder for thixotropic solvent borne coatings that is medium length oil. This alkyd resin is an air-drying resin that is made from soybean oil and polyamide. 50% of the solution is delivered in de-aromatized white spirit. It has...展開 CHS-Alkyd ST 551 N 50 is a binder for thixotropic solvent borne coatings that is medium length oil. This alkyd resin is an air-drying resin that is made from soybean oil and polyamide. 50% of the solution is delivered in de-aromatized white spirit. It has as gel like structure, the aromatic content is less than 1 percent. This product is primarily used for air-drying thixotropic synthetic paints that are used for interiors and exteriors as penetrates and lacquers. It is used to prevent pigment and fillers from settling in synthetic paints. 收起 | |
| THIXATROL® P200A | Elementis | THIXATROL® P200A is a predispersed solventborne polyamide wax suitable for use under less than optimum dispersion conditions and as a post addable thixotropic rheological additive that is useful in a wide range of solvents. | |
| Cimsil A55G | Tolsa, S.A. | Cimsil A55G is a thixotropic powder additive. It can be used in cement and/or lime and gypsum systems. It is used as an additive for mortars and stuccos rendering, tile adhesive mortars, self-leveling mortars, and waterproofing mortars. | |
| CV-2502 | NuSil Silicone Technology 1 | CV-2502 is a thixotropic, translucent RTV silicone that is especially useful when environmental protection is needed for electronic and space applications. It stops condensation from harming sensitive devices. This product also can function as an embeddin...展開 CV-2502 is a thixotropic, translucent RTV silicone that is especially useful when environmental protection is needed for electronic and space applications. It stops condensation from harming sensitive devices. This product also can function as an embedding compound for electronic systems. 收起 | |
| HL-150 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HL-150 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control and improved free-flow & anti-caking characteristics. This product is designed for use in adhesives & sealants...展開 HL-150 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control and improved free-flow & anti-caking characteristics. This product is designed for use in adhesives & sealants and paints & coatings. 收起 | |
| Epoxies® 50-3186 NC | Epoxies, Etc. | Epoxies® 50-3186 NC is a two part thermally conductive epoxy adhesive. This thixotropic adhesive provides high temperature bonds to a variety of substrates. 50-3186 NC is a perfect choice for applications requiring high thermal conductivity, low thermal e...展開 Epoxies® 50-3186 NC is a two part thermally conductive epoxy adhesive. This thixotropic adhesive provides high temperature bonds to a variety of substrates. 50-3186 NC is a perfect choice for applications requiring high thermal conductivity, low thermal expansion, and high operating temperature performance. 收起 | |
| HL-200 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HL-200 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides high transparency, good rheological & thixotropic control, and improved free-flow & anti-caking characteristics. This product is designed for use in ...展開 HL-200 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides high transparency, good rheological & thixotropic control, and improved free-flow & anti-caking characteristics. This product is designed for use in paints & coatings, adhesives & sealants, and printing inks. 收起 | |
| HL-300 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HL-300 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for us...展開 HL-300 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for use in paints & coatings, adhesives & sealants, and printing inks. 收起 | |
| HL-380 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HL-380 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for us...展開 HL-380 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for use in paints & coatings, adhesives & sealants, and printing inks. 收起 | |
| THIXATROL® P200X | Elementis | THIXATROL® P200X is a predispersed solventborne polyamide wax designed to provide excellent thixotropy, anti- sag and anti-settling properties. It is suitable for use under less than optimum dispersion conditions and as a post addable thixotropic rheologi...展開 THIXATROL® P200X is a predispersed solventborne polyamide wax designed to provide excellent thixotropy, anti- sag and anti-settling properties. It is suitable for use under less than optimum dispersion conditions and as a post addable thixotropic rheological additive that is useful in a wide range of solvents. 收起 | |
| HB-620 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HB-620 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use i...展開 HB-620 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use in paints & coatings, inks, and adhesives & sealants. 收起 | |
| HB-615 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HB-615 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use i...展開 HB-615 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use in coatings, inks, negative toners, and adhesives & sealants. 收起 | |
| THIXATROL® AS 8024 | Elementis | THIXATROL® AS 8024 is a finely micronized polyamide rheological additive. This product is recommended for the use in solvent-borne and solvent-free medium to higher polar liquid organic systems. The product is suitable as a thickener, thixotropic or anti-...展開 THIXATROL® AS 8024 is a finely micronized polyamide rheological additive. This product is recommended for the use in solvent-borne and solvent-free medium to higher polar liquid organic systems. The product is suitable as a thickener, thixotropic or anti-settling agent in paints and coatings, adhesives, sealants and putties, and other formulations. 收起 | |
| CV-2189-2 | NuSil Silicone Technology 1 | CV-2189-2 is a one-part, black, platinum catalyzed silicone glop-top that has a thixotropic consistency and a low modulus. The function of this product is to ensure microchip reliability by providing protection against vibration, shock, dust, chemicals an...展開 CV-2189-2 is a one-part, black, platinum catalyzed silicone glop-top that has a thixotropic consistency and a low modulus. The function of this product is to ensure microchip reliability by providing protection against vibration, shock, dust, chemicals and other hazards. It is also ideal for applications that require precise delivery configurations. 收起 | |
| VINNAPAS® 5021 T | Wacker Chemical Corporation | VINNAPAS® 5021 T是一種觸變性產品，具有良好的附著力和耐水性 | Request Sample |
| CV4-2289-1 | NuSil Silicone Technology 1 | CV4-2289-1 is a thixotropic silicone elastomer that can be used as an adhesive that offers superior tear strength. This silicone also demonstrates flexibility at extremely low temperatures with a stiffening temperature of approximately -115°C. It can be u...展開 CV4-2289-1 is a thixotropic silicone elastomer that can be used as an adhesive that offers superior tear strength. This silicone also demonstrates flexibility at extremely low temperatures with a stiffening temperature of approximately -115°C. It can be used to protect electronic components, cable harness breakouts, seals, and gaskets from harsh environmental conditions. 收起 | |
| KMP 15000M | Vink Chemicals GmbH & Co. KG | KMP 15000M is a modified type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties...展開 KMP 15000M is a modified type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties. This product is well suited for use in cement-based tile adhesives, mortars, stuccos, fillers, and white render finishes. 收起 | |
| KMP 6000M | Vink Chemicals GmbH & Co. KG | KMP 6000M is a modified type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties....展開 KMP 6000M is a modified type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties. This product is well suited for use in cement-based tile adhesives, mortars, stuccos, fillers, and white render finishes. 收起 | |
| CV-2568 | NuSil Silicone Technology 1 | CV-2568 is a thixotropic RTV silicone that has a low density and has controlled volatility. This product act as a bonding or sealant in space applications. It has a broad operating temperature range and can provide radiation resistance, oxidation and ther...展開 CV-2568 is a thixotropic RTV silicone that has a low density and has controlled volatility. This product act as a bonding or sealant in space applications. It has a broad operating temperature range and can provide radiation resistance, oxidation and thermal stability. It can also be utilized in applications that require low outgassing under extreme operating conditions. 收起 | |
| Pangel B10 | Tolsa, S.A. | Pangel B10 is a powdered additive with high thickening and anti-settling capacity for medium-low polarity systems. It offers thixotropic, suspension, and sagging resistance properties based on White Spirit type solvents. It can be used in paints, coatin...展開 Pangel B10 is a powdered additive with high thickening and anti-settling capacity for medium-low polarity systems. It offers thixotropic, suspension, and sagging resistance properties based on White Spirit type solvents. It can be used in paints, coatings, printing inks, drilling mud, greases, sealants and joints, asphalt coatings, putties, rubber, gel-coat, and emulsions. 收起 | |
| Epoxies® 10-2055I | Epoxies, Etc. | Epoxies® 10-2055I is a light amber semi flexible polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2055I produces a consistency similar to honey with low viscosity handling characteristics and turns thixotrop...展開 Epoxies® 10-2055I is a light amber semi flexible polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2055I produces a consistency similar to honey with low viscosity handling characteristics and turns thixotropic upon mixing. 收起 | |
| Epoxies® 10-2055P | Epoxies, Etc. | Epoxies® 10-2055P is a light amber semi flexible polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2055P produces a consistency similar to honey with low viscosity handling characteristics and turns thixotrop...展開 Epoxies® 10-2055P is a light amber semi flexible polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2055P produces a consistency similar to honey with low viscosity handling characteristics and turns thixotropic upon mixing. 收起 | |
| Epoxies® 10-2055PHV | Epoxies, Etc. | Epoxies® 10-2055PHV is a light amber semi flexible polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2055PHV produces a consistency similar to grease with low viscosity handling characteristics and turns thixotrop...展開 Epoxies® 10-2055PHV is a light amber semi flexible polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2055PHV produces a consistency similar to grease with low viscosity handling characteristics and turns thixotropic upon mixing. 收起 | |
| Epoxies® 10-2080I | Epoxies, Etc. | Epoxies® 10-2080I is a light amber semi rigid polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2080I produces a consistency similar to honey with low viscosity handling characteristics and turns thixotrop...展開 Epoxies® 10-2080I is a light amber semi rigid polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2080I produces a consistency similar to honey with low viscosity handling characteristics and turns thixotropic upon mixing. 收起 | |
| Epoxies® 10-2080P | Epoxies, Etc. | Epoxies® 10-2080P is a light amber semi rigid polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2080P produces a consistency similar to honey with low viscosity handling characteristics and turns thixotrop...展開 Epoxies® 10-2080P is a light amber semi rigid polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2080P produces a consistency similar to honey with low viscosity handling characteristics and turns thixotropic upon mixing. 收起 | |
| Epoxies® 10-2080PHV | Epoxies, Etc. | Epoxies® 10-2080PHV is a light amber semi rigid polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2080PHV produces a consistency similar to honey with low viscosity handling characteristics and turns thixotrop...展開 Epoxies® 10-2080PHV is a light amber semi rigid polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2080PHV produces a consistency similar to honey with low viscosity handling characteristics and turns thixotropic upon mixing. 收起 | |
| Pangel OMD2 | Tolsa, S.A. | Pangel OMD2 is a rheological additive for medium to high polarity systems made from purified bentonite clay. It is recommended for providing solvent-borne systems with properties including thixotropic and pseudoplastic effects, sag control, levelling, an...展開 Pangel OMD2 is a rheological additive for medium to high polarity systems made from purified bentonite clay. It is recommended for providing solvent-borne systems with properties including thixotropic and pseudoplastic effects, sag control, levelling, and pigment settling prevention. It can be used in anti-corrosive paints, adhesives, industrial finishes, maintenance coatings, epoxy based coatings, and paint removers. 收起 | |
| Cimsil A35 | Tolsa, S.A. | Cimsil A35 is a powdered additive that modifies the rheology of mortar, gypsum plaster, and concrete. It is a thixotropic additive specifically developed to act as an anti-sagging, anti-slipping agent that improves the work ability and visual finish in ...展開 Cimsil A35 is a powdered additive that modifies the rheology of mortar, gypsum plaster, and concrete. It is a thixotropic additive specifically developed to act as an anti-sagging, anti-slipping agent that improves the work ability and visual finish in the systems to which it is incorporated. It can be used in ceramic adhesives, ready mixed adhesives, crack fillers, and pastes. 收起 | |
| KMP 150000M2 | Vink Chemicals GmbH & Co. KG | KMP 150000M2 is a modified type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properti...展開 KMP 150000M2 is a modified type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties. This product is well suited for use in cement-based tile adhesives, mortars, stuccos, fillers, and white render finishes. 收起 | |
| KMP 100000 | Vink Chemicals GmbH & Co. KG | KMP 100000 is a surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic pr...展開 KMP 100000 is a surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties. This product is well suited for use in cement-based tile adhesives, mortars, grouts, stuccos, fillers, and white render finishes. 收起 | |
| KMP 200000 | Vink Chemicals GmbH & Co. KG | KMP 200000 is a surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic pr...展開 KMP 200000 is a surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties. This product is well suited for use in cement-based tile adhesives, mortars, grouts, stuccos, plasters, and white render finishes. 收起 | |
| KMP 30000M4 | Vink Chemicals GmbH & Co. KG | KMP 30000M4 is a modified type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic propertie...展開 KMP 30000M4 is a modified type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties. This product is well suited for use in cement-based tile adhesives, mortars, grouts, stuccos, fillers, and white render finishes. 收起 | |
| CV2-2566 | NuSil Silicone Technology 1 | CV2-2566 is a two-part, thixotropic red RTV silicone that can be used as a potting material, sealant, caulking, or adhesive in space and electronic applications where a high vacuum environment is encountered. This is a versatile product because in can fun...展開 CV2-2566 is a two-part, thixotropic red RTV silicone that can be used as a potting material, sealant, caulking, or adhesive in space and electronic applications where a high vacuum environment is encountered. This is a versatile product because in can function within a broad operating temperature range. It can also be used to bond solar cells to solar array panels. 收起 | |
| CAB-O-SIL® EH5 | Cabot Corporation - Additives | CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and ...展開 CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. This product is well suited for use in adhesives and sealants, coatings, and printing inks. 收起 | |
| KMP 100000N | Vink Chemicals GmbH & Co. KG | KMP 100000N is a non-surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotrop...展開 KMP 100000N is a non-surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties. This product is well suited for use in cement-based tile adhesives, mortars, grouts, stuccos, fillers, plasters, and white render finishes. 收起 | |
| KMP 150000N | Vink Chemicals GmbH & Co. KG | KMP 150000N is a non-surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotrop...展開 KMP 150000N is a non-surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties. This product is well suited for use in cement-based tile adhesives, mortars, grouts, stuccos, fillers, plasters, and white render finishes. 收起 | |
| KMP 75000 | Vink Chemicals GmbH & Co. KG | KMP 75000 is a surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic pro...展開 KMP 75000 is a surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties. This product is well suited for use in cement-based tile adhesives, mortars, grouts, stuccos, fillers, plasters, and white render finishes. 收起 | |
| SCV2-2599 | NuSil Silicone Technology 1 | SCV2-2599 is a thixotropic, thermally conductive silicone that is designed to allow bond line thicknesses of < or = 50 microns. This product cures with the addition of heat and provides heat transfer between electrical/electronic components and their heat...展開 SCV2-2599 is a thixotropic, thermally conductive silicone that is designed to allow bond line thicknesses of < or = 50 microns. This product cures with the addition of heat and provides heat transfer between electrical/electronic components and their heat sinks. It can also be used as an adhesive for base plates, integrated circuit substrates, heat sinks or where grooves require a non-flow material. 收起 | |
| CRAYVALLAC® PA3 X 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA3 X 20 is a pre-activated amide wax dispersed in a mixture of xylene and alcohols. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings and industrial wood finishes. The use of CRAYVALLAC® PA3 X 20 provides a very simple and direct means of introducing shear-thinning rheology with thixotrop...展開 CRAYVALLAC® PA3 X 20 is a pre-activated amide wax dispersed in a mixture of xylene and alcohols. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings and industrial wood finishes. The use of CRAYVALLAC® PA3 X 20 provides a very simple and direct means of introducing shear-thinning rheology with thixotropic viscosity recovery to coating formulations. 收起 | Request Sample |
| Pangel B20 | Tolsa, S.A. | Pangel B20 is a powdered additive with high thickening and anti-setting capacity for intermediate polarity systems. It provides thixotropic, suspension, and sagging resistance properties to systems based on aromatic and unsaturated polyester type solvent...展開 Pangel B20 is a powdered additive with high thickening and anti-setting capacity for intermediate polarity systems. It provides thixotropic, suspension, and sagging resistance properties to systems based on aromatic and unsaturated polyester type solvents. It can be used in paints, coatings, printing inks, unsaturated polyester putties, paint strippers, greases, asphalt coatings, sealants and joints, plastisol and rubber, emulsions, gel-coats, and nail varnish,. 收起 | |
| R31-2186 | NuSil Silicone Technology 1 | R31-2186 is a translucent, thixotropic, silicone adhesive that has a high tear strength and cures at room temperature, and rapidly with the addition of heat. The consistency of this product allows it to be supplied in easy-to-use, airless side-by-side kit...展開 R31-2186 is a translucent, thixotropic, silicone adhesive that has a high tear strength and cures at room temperature, and rapidly with the addition of heat. The consistency of this product allows it to be supplied in easy-to-use, airless side-by-side kits that remove the need to mix. It can be used as an adhesive for sealing and bonding silicones to each other and other substrates such as plastics and metals. 收起 | |
| CLAYTONE-40 | BYK | TIXOGEL® VP是一個觸變、防沉降劑，可用於低到中等極性體系。為了達到最佳的效率，TIXOGEL® VP應使用高剪切力分散。 | |
| Pangel B40 | Tolsa, S.A. | Pangel B40 is a powdered additive with high thickening and anti-settling capacity for high polarity systems, particularly those based on alcohol, glycol, or ketone type solvents, or in mixtures of those with water. It is recommended to provide thixotropi...展開 Pangel B40 is a powdered additive with high thickening and anti-settling capacity for high polarity systems, particularly those based on alcohol, glycol, or ketone type solvents, or in mixtures of those with water. It is recommended to provide thixotropic, suspension, and sagging-resistance properties. It can be used in coatings, paints, printing inks, paint strippers, sealants and joints, vinyl plastisol, gel-coat, nail varnish, wash coat alcohols, glycols, and esters. 收起 | |
| Valida L,3% | Sappi Biotech | Valida is highly fibrillated cellulose manufactured by Sappi, 100% natural and VOC- free. It is a pre-hydrated multifunctional bio-based additive with unique rheology profile and thixotropic nature. In adhesive application, Valida improves dry-out time, e...展開 Valida is highly fibrillated cellulose manufactured by Sappi, 100% natural and VOC- free. It is a pre-hydrated multifunctional bio-based additive with unique rheology profile and thixotropic nature. In adhesive application, Valida improves dry-out time, enables recovery of viscosity, improves anti-settling of particles and in-can stability, as well as sagging & leveling balance. The highly shear thinning profile makes Valida easy to be processed and provide enhanced spray-ability. 收起 | |
| Valida S191C | Sappi Biotech | Valida is highly fibrillated cellulose manufactured by Sappi, 100% natural and VOC- free. It is a pre-hydrated multifunctional bio-based additive with unique rheology profile and thixotropic nature. In adhesive application, Valida improves dry-out time, e...展開 Valida is highly fibrillated cellulose manufactured by Sappi, 100% natural and VOC- free. It is a pre-hydrated multifunctional bio-based additive with unique rheology profile and thixotropic nature. In adhesive application, Valida improves dry-out time, enables recovery of viscosity, improves anti-settling of particles and in-can stability, as well as sagging & leveling balance. The highly shear thinning profile makes Valida easy to be processed and provide enhanced spray-ability. 收起 | |
| Valida S231C | Sappi Biotech | Valida is highly fibrillated cellulose manufactured by Sappi, 100% natural and VOC- free. It is a pre-hydrated multifunctional bio-based additive with unique rheology profile and thixotropic nature. In adhesive application, Valida improves dry-out time, e...展開 Valida is highly fibrillated cellulose manufactured by Sappi, 100% natural and VOC- free. It is a pre-hydrated multifunctional bio-based additive with unique rheology profile and thixotropic nature. In adhesive application, Valida improves dry-out time, enables recovery of viscosity, improves anti-settling of particles and in-can stability, as well as sagging & leveling balance. The highly shear thinning profile makes Valida easy to be processed and provide enhanced spray-ability. 收起 | |
| CLAYTONE 34 | BYK | CLAYTONE 34 is a modified montmorillonite designed for use in aliphatic systems containing aromatic solvent or aromatic-aliphatic solvent blends which display moderate polarity. It demonstrates high gelling efficiency, reproducible viscosity and thixotrop...展開 CLAYTONE 34 is a modified montmorillonite designed for use in aliphatic systems containing aromatic solvent or aromatic-aliphatic solvent blends which display moderate polarity. It demonstrates high gelling efficiency, reproducible viscosity and thixotropic development, a high degree of sag control and prevents hard settling of pigments and fillers. CLAYTONE 34 has proven to be a reliable and reproducible rheological additive for use in oil based paints, stains, alkyd enamels and primers, and epoxy systems. 收起 | |
| R32-2186 | NuSil Silicone Technology 1 | R32-2186 is a two-part, translucent, thixotropic, high tear strength silicone adhesive that cures rapidly with the application of heat in an oven, or by a heat gun or lamp. It does not require atmospheric moisture to cure. This adhesive can be used for bo...展開 R32-2186 is a two-part, translucent, thixotropic, high tear strength silicone adhesive that cures rapidly with the application of heat in an oven, or by a heat gun or lamp. It does not require atmospheric moisture to cure. This adhesive can be used for bonding and sealing silicones to each other and other substrates such as metals and plastics. This product is ready for rapid production or prototyping due to its rapid cure rate. 收起 | |
| Benox® B55 | UNITED INITIATORS GMBH & CO KG | Benox® B55 is a fine dispersion of dibenzoyl peroxide in a smooth, non-separating fire resistant creamy paste form with a white or red thixotropic cream appearance. It can freely be dissolved in monomers and resins and is primarily used as a curing agent ...展開 Benox® B55 is a fine dispersion of dibenzoyl peroxide in a smooth, non-separating fire resistant creamy paste form with a white or red thixotropic cream appearance. It can freely be dissolved in monomers and resins and is primarily used as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B55 can also be used in two-part adhesive systems based on methacylate or polyester resins. 收起 | |
| UV Cure 60-7158 | Epoxies, Etc. | UV Cure 60-7158 is a UV curable epoxy adhesive formulated to bond rigid substrates. This adhesive bonds extremely well to aluminum while also providing good water and chemical resistance. UV Cure 60-7158 is a semi-rigid adhesive and it is well suited for bonding rigid substrates. It is thixotrop...展開 UV Cure 60-7158 is a UV curable epoxy adhesive formulated to bond rigid substrates. This adhesive bonds extremely well to aluminum while also providing good water and chemical resistance. UV Cure 60-7158 is a semi-rigid adhesive and it is well suited for bonding rigid substrates. It is thixotropic and will not run once applied to the substrate. UV Cure 60-7158 does not contain any solvents, has little shrinkage and provides a smooth non-sticky surface. 收起 | |
| Crestomer® 1152PA | Scott Bader | Crestomer® 1152PA is a two part pre-accelerated structural adhesive that is highly thixotropic and is based on unsaturated urethane acrylate in styrene monomer. It displays good adhesion to core materials, wood, FRP laminates and some metals and because o...展開 Crestomer® 1152PA is a two part pre-accelerated structural adhesive that is highly thixotropic and is based on unsaturated urethane acrylate in styrene monomer. It displays good adhesion to core materials, wood, FRP laminates and some metals and because of its good adhesion properties, Crestomer® 1152PA can be recommended for use as a general purpose adhesive. It can also be used to bond contour joints in FRP components, to bond diesel tanks as well as bonding damaged areas or "green" FRP. 收起 | |
| CAB-O-SIL® H5 | Cabot Corporation - Additives | CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and h...展開 CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. It is also used for building viscosity in non-polar to medium polarity systems. This product is well suited for use in adhesives, coatings, composites, cosmetics, food, pharmaceuticals, powder coatings, sealants, and silicone rubber systems. 收起 | |
| THIXCIN® R | Elementis | THIXCIN® R 為非吸濕性蓖麻油有機衍生物，能提供比 THIXCIN® E 更高的增稠效率。 | |
| CLAYTONE® 40 | BYK | Claytone® 40是一種親有機膨潤土衍生物，用作觸變增稠劑和抗沉降劑，用於低到中等極性溶劑型塗料。這是一個傳統的有機粘土，需要添加活化劑以獲取充分的效能。作為親有機的蒙脫石產品，它可以在有機介質中溶脹，並建立一種凝膠結構（紙房狀構造）。單蒙脫石片層之間的弱氫鍵是此觸變凝膠結構的原因。為了獲取最佳效率，片層的完全分離是必要的（附聚物解聚成初級粒子完全分散）。 | |
| Crestomer® 1150PA | Scott Bader | Crestomer® 1150PA is a highly thixotropic structural adhesive that is pre-accelerated and based on unsaturated urethane acrylate in styrene monomer. It displays good adhesion and high elongation at break, shows no sagging on vertical surfaces and has good...展開 Crestomer® 1150PA is a highly thixotropic structural adhesive that is pre-accelerated and based on unsaturated urethane acrylate in styrene monomer. It displays good adhesion and high elongation at break, shows no sagging on vertical surfaces and has good fatigue and impact resistance properties. Crestomer® 1150PA is mostly used in structural composite applications and has good adhesion to FRP laminates, wood and some metals as well as core materials. Crestomer® 1150PA can be used for bonding diesel tanks and contour joints in FRP components. 收起 | |
| CAB-O-SIL® H5 | Univar Solutions | CAB-O-SIL® H5 is a high surface area fumed silica that can impart a significant increase in the viscosity of liquid systems, and both reinforcement and viscosity of sealants and rubbers. It can be used to provide thickening, thixotropic (shear-thinning), ...展開 CAB-O-SIL® H5 is a high surface area fumed silica that can impart a significant increase in the viscosity of liquid systems, and both reinforcement and viscosity of sealants and rubbers. It can be used to provide thickening, thixotropic (shear-thinning), and anti-settling behavior in liquid systems. High shear dispersion equipment is required to realize the full benefits of H-5 fumed silica. For clear coatings and other systems, well-dispersed CAB-O-SIL® H5 fumed silica allows for good transparency. 收起 | Request Sample |
| Crestomer® 1153PA | Scott Bader | Crestomer® 1153PA is a structural adhesive that is highly thixotropic and derived from unsaturated urethane acrylate in styrene monomer. The adhesive has a long open time of 90 minutes and shows good adhesion to core materials, metals, wood and FRP lamina...展開 Crestomer® 1153PA is a structural adhesive that is highly thixotropic and derived from unsaturated urethane acrylate in styrene monomer. The adhesive has a long open time of 90 minutes and shows good adhesion to core materials, metals, wood and FRP laminates. Because of its good adhesion properties, Crestomer® 1153PA is ideal for use as a general purpose adhesive. The adhesive is also used to contour joints in FRP components, to bond "green" FRP and to build up damaged areas. Crestomer® 1153PA is mainly used in structural composite applications. 收起 | |
| OPTIBENT® 987 | BYK | OPTIBENT® 987是經仔細篩選活化的層狀矽酸鹽產品，已被開發用於幹燥預混合砂漿和乳液基體系。它具有出色的觸變效應，並使體系產生了屈服值。 | |
| Jaylink® 106E | Bomar, formerly Dymax Oligomers & Coatings | Jaylink® 106E polymerizable cellulosic is an acrylamidomethyl-substituted cellulose ester polymer. Due to its high degree of acrylamide substitution, formulations using JL-106E cure very rapidly in response to UV/EB. Resulting films have excellent abrasion, chemical, and impact resistance. The hydrophobic and hydrophilic segments of 106E make it an excellent compatibilizer for materials of differing polarity. JL-106E is used for its thixotrop...展開 Jaylink® 106E polymerizable cellulosic is an acrylamidomethyl-substituted cellulose ester polymer. Due to its high degree of acrylamide substitution, formulations using JL-106E cure very rapidly in response to UV/EB. Resulting films have excellent abrasion, chemical, and impact resistance. The hydrophobic and hydrophilic segments of 106E make it an excellent compatibilizer for materials of differing polarity. JL-106E is used for its thixotropic characteristics, which are particularly useful in improving UV ink holdout on porous substrates, without sacrificing cured properties. This material is INCI listed for use in the cosmetic industry. 收起 | |
| ARBOCEL® P 4000 X | J. Rettenmaier & Söhne GmbH & Co. KG | ARBOCEL® P 4000 X is a cellulose gel, co-processed with cellulose gum and xanthan in form of a dispersable powder. By using shear energy (dissolver, kneader) it is possible to convert ARBOCEL® P 4000 X into a (thermo-)stable, thixotropic gel, with anti-se...展開 ARBOCEL® P 4000 X is a cellulose gel, co-processed with cellulose gum and xanthan in form of a dispersable powder. By using shear energy (dissolver, kneader) it is possible to convert ARBOCEL® P 4000 X into a (thermo-)stable, thixotropic gel, with anti-setting properties, which improves the rheology of water-based systems. JRS products are based on natural materials. We strive to maximize the value of plant based sidestreams via extracting biodegradable additives for manifold applications. With our regrowing fibers and polymers, sustainability and functionality are introduced in composites, adhesives and many more products. 收起 | |
| RHEOBYK-411 | BYK | 用於溶劑型和無溶劑型涂料的液態流變添加劑。使用后可在體系內形成一種假塑性，其觸變型流動特性可以防止沉澱和流挂。由於產品呈液態，因而使用簡便。 | |
| RHEOBYK-420 | BYK | 用於水性涂料和顏料濃縮漿的液體流變助劑，加入后能形成三維網絡，這樣形成的觸變流動性防止沉降和改善流挂性，應加入到研磨基料中。 | |
| Crystic® Scottbond 102PA White | Scott Bader | Crystic® Scottbond 102PA White is a white-colored pourable adhesive paste that is from a specially selected unsaturated polyester resin that is pre-accelerated to offer a convenient working time. The resin-based adhesive has a thixotropic polyester and is...展開 Crystic® Scottbond 102PA White is a white-colored pourable adhesive paste that is from a specially selected unsaturated polyester resin that is pre-accelerated to offer a convenient working time. The resin-based adhesive has a thixotropic polyester and is meant for bonding GRP to rigid polyurethane foam in sandwich panel systems. Crystic® Scottbond 102PA is also used to bond GRP to plywood and plywood to polyurethane foam. It is designed to ensure ease of application and spreads easily under pressure, presenting a smoother surface in the finished product. However, it should not soak or drain too much into the polyurethane foam. Some penetration is necessary to ensure adhesion. 收起 | |
| Fumed Silica | Beijing Entrepreneur Science &Trading Co., Ltd. | Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotrop...展開 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 收起 | |
| OPTIBENT® 1056 | BYK | OPTIBENT®1056是一種高品質，精心選擇和激活的層狀矽酸鹽產品，並已開發了水泥基瓷磚粘合劑和中塗層（底塗）。由於其優異的觸變性，配方的抗流掛性和可加工性特性可以得到改善。本產品可用於幹混砂漿和膠粘劑 | |
| CLAYTONE® APA | BYK | Claytone® APA是一種改性蒙脫石，用於含中等到高極性的芳香族溶劑或芳香族氧化物溶劑混合物的體系。Claytone® APA具有高凝膠效率、可重複的黏度和觸變控制，高程度流掛控制，並防止顏料和填料沉降。 | |
| OPTIGEL® WA | BYK | OPTIGEL® WA，特選並經過活化的蒙脫石產品，在水中具有高溶脹能力，具有顯著的觸變增稠效果。它具有中性pH值，用於中性和堿性體系特別有效。本產品可以防止重顏料或填料的沉降，抑制流掛，並允許厚膜施工。 | |
| HDK® N20 | Wacker Chemical Corporation | 合成的親水的無定形矽土，通過火焰水解法制備 | Request Sample |
| HDK® H18 | Wacker Chemical Corporation | 合成的憎水的無定形矽土，通過火焰水解法制備 | Request Sample |
| OPTIGEL® LX | BYK | OPTIGEL® LX是改性膨潤土，專門開發作為增稠劑用於水性體系。它是一種有效的觸變增稠劑。本產品設計專為在乳液體系中使用，不應用在水可稀釋（助溶劑）系統。它可以單獨使用或與纖維素材料結合使用，以改善顏料懸浮液和賦予防滴的施工性能。 | |
| VIVAPUR® MCG 500 F | J. Rettenmaier & Söhne GmbH & Co. KG | VIVAPUR® MCG 500 F is a cellulose gel, co-processed with cellulose gum in form of a dispersable powder. By using shear energy (dissolver, kneader) it is possible to convert VIVAPUR® MCG 500 F into a (thermo-)stable, thixotropic gel, with anti-setting prop...展開 VIVAPUR® MCG 500 F is a cellulose gel, co-processed with cellulose gum in form of a dispersable powder. By using shear energy (dissolver, kneader) it is possible to convert VIVAPUR® MCG 500 F into a (thermo-)stable, thixotropic gel, with anti-setting properties, which improves the rheology of water-based systems. VIVAPUR® MCG 500 F is a compound of EU approved food additives which comply with the specifications according to Reg. (EU) No. 231/2012 and Food Chemical Codex. JRS products are based on natural materials. We strive to maximize the value of plant based sidestreams via extracting biodegradable additives for manifold applications. With our regrowing fibers and polymers, sustainability and functionality are introduced in composites, adhesives and many more products. 收起 | |
| VIVAPUR® MCG 611 FS | J. Rettenmaier & Söhne GmbH & Co. KG | VIVAPUR® MCG 611 FS is a cellulose gel, co-processed with cellulose gum in form of a dispersable powder. By using shear energy (dissolver, kneader) it is possible to convert VIVAPUR® MCG 611 FS into a (thermo-)stable, thixotropic gel, with anti-setting pr...展開 VIVAPUR® MCG 611 FS is a cellulose gel, co-processed with cellulose gum in form of a dispersable powder. By using shear energy (dissolver, kneader) it is possible to convert VIVAPUR® MCG 611 FS into a (thermo-)stable, thixotropic gel, with anti-setting properties, which improves the rheology of water-based systems. VIVAPUR® MCG 611 FS is a compound of EU approved food additives which comply with the specifications according to Reg. (EU) No. 231/2012 and Food Chemical Codex. JRS products are based on natural materials. We strive to maximize the value of plant based sidestreams via extracting biodegradable additives for manifold applications. With our regrowing fibers and polymers, sustainability and functionality are introduced in composites, adhesives and many more products. 收起 | |
| VIVAPUR® MCG 811 F | J. Rettenmaier & Söhne GmbH & Co. KG | VIVAPUR® MCG 811 F is a cellulose gel, co-processed with cellulose gum in form of a dispersable powder. By using shear energy (dissolver, kneader) it is possible to convert VIVAPUR® MCG 811 F into a (thermo-)stable, thixotropic gel, with anti-setting prop...展開 VIVAPUR® MCG 811 F is a cellulose gel, co-processed with cellulose gum in form of a dispersable powder. By using shear energy (dissolver, kneader) it is possible to convert VIVAPUR® MCG 811 F into a (thermo-)stable, thixotropic gel, with anti-setting properties, which improves the rheology of water-based systems. VIVAPUR® MCG 811 F is a compound of EU approved food additives which comply with the specifications according to Reg. (EU) No. 231/2012 and Food Chemical Codex. JRS products are based on natural materials. We strive to maximize the value of plant based sidestreams via extracting biodegradable additives for manifold applications. With our regrowing fibers and polymers, sustainability and functionality are introduced in composites, adhesives and many more products. 收起 | |
| CN2273 | Sartomer Americas | ||
| Pyrogenic Silica RS-50 | Glassfillers.com (A unit of Vitrominerals Inc.) | Pyrogenic Silica RS-50 is a hydrophilic, 100% recycled synthetic, fully X-ray amorphous silica, produced by flame hydrolysis. It is a white, submicron-sized powder of great purity and a surface area of 20 to 50 m2/g. RS-50 is effective as a thixotropic r...展開 Pyrogenic Silica RS-50 is a hydrophilic, 100% recycled synthetic, fully X-ray amorphous silica, produced by flame hydrolysis. It is a white, submicron-sized powder of great purity and a surface area of 20 to 50 m2/g. RS-50 is effective as a thixotropic rheology control and thickening agent in many polymer systems, such as unsaturated polyesters, adhesives, sealants, coatings, printing inks, etc. It can be used as active strengthening filler in silicone-elastomers and elastomers. Pyrogenic Silica RS-50 has a specific gravity of 2.2, a bulk density of 23 to 25 lb/ft3 vibrated, oil absorption of 65 g/100g, a pH of 6.0 (4% dispersion in water), a refractive index of 1.46, and a softening temperature of ~1600 °C. 收起 | |
| CN2271E | Sartomer Americas | 具備比CN2270更高的UV固化率。該低聚物與環氧和聚氨酯丙烯酸酯配合用於油墨時表現為觸變性。用於稀釋環氧丙烯酸酯最佳，提高附著力和固化率。用於高二氧化鈦分散體最為理想。 | |
| LAPONITE® RD | BYK | Laponite® RD是一種人工合成的層狀矽酸鹽。它不溶於水，但水合物和膨脹後成為清澈無色的膠體分散體。在水中2％或更高濃度時，會產生高觸變性凝膠。本產品用於各種水性配方，為其賦予剪切敏感特性。這些包括家用和工業表面塗料，清潔劑，陶瓷釉料，農用化學品，油田和園藝產品。 | |
| LAPONITE® RD | Univar Solutions | Laponite® RD是一種人工合成的層狀矽酸鹽。它不溶於水，但水合物和膨脹後成為清澈無色的膠體分散體。在水中2％或更高濃度時，會產生高觸變性凝膠。本產品用於各種水性配方，為其賦予剪切敏感特性。這些包括家用和工業表面塗料，清潔劑，陶瓷釉料，農用化學品，油田和園藝產品。 | Request Sample |
| CLAYTONE® AF | BYK | Claytone® AF是一種改性蒙脫石，用於含低到中等極性的脂肪族溶劑和脂肪族 - 芳香族溶劑混合物的體系。Claytone®產生可重複的黏度和觸變控制，高程度流掛控制，並防止顏料沉降。Claytone® AF是自分散的，不需要極性活化劑。Claytone® AF無需高剪切力或預凝膠。 | |
| OPTIGEL® WX | BYK | Optigel® WX，是特選並經過活化的蒙脫石產品，在水中具有高溶脹能力，具有顯著的觸變增稠效果。本產品對稀釋的酸和堿穩定，用於酸性、中性和堿性系統特別有效。本產品適用於乳膠漆、離型塗料、矽酸鹽塗料、脫漆劑、水稀釋性塗料、液體清潔劑、油墨、研磨膏和研磨料，以及汽車底塗應用。 | |
| OPTIGEL® WX | Univar Solutions | Optigel® WX，是特選並經過活化的蒙脫石產品，在水中具有高溶脹能力，具有顯著的觸變增稠效果。本產品對稀釋的酸和堿穩定，用於酸性、中性和堿性系統特別有效。本產品適用於乳膠漆、離型塗料、矽酸鹽塗料、脫漆劑、水稀釋性塗料、液體清潔劑、油墨、研磨膏和研磨料，以及汽車底塗應用。 | Request Sample |
| CLAYTONE® HT | BYK | Claytone® HT是一種改性蒙脫石，用於含低到中等極性的芳香族溶劑和脂肪族溶劑的體系。Claytone® HT具有高凝膠效率、可重複的黏度和觸變控制，高程度流掛控制，並防止顏料和填料沉降。本產品是一種高性能的流變助劑，用於在高性能的油性塗料，特別適合於工業、船舶和防護塗料。 | |
| OPTIGEL® CK | BYK | OPTIGEL® CK是一種精心挑選並活化的膨潤土產品。它可在水中溶脹，並具有顯著的觸變增稠效果。它可以防止重顏料/填料的沉降，並為體系引入了屈服值。本產品的應用領域，如乳膠漆和灰泥、浸塗塗料、底漆、密封劑和膩子、陶瓷熔塊及化合物、焊條、鑄造清洗、清潔劑和拋光劑、膠粘劑、瀝青乳液、水可稀釋性系統和水包油乳液。 | |
| OPTIGEL® CK | Univar Solutions | OPTIGEL® CK是一種精心挑選並活化的膨潤土產品。它可在水中溶脹，並具有顯著的觸變增稠效果。它可以防止重顏料/填料的沉降，並為體系引入了屈服值。本產品的應用領域，如乳膠漆和灰泥、浸塗塗料、底漆、密封劑和膩子、陶瓷熔塊及化合物、焊條、鑄造清洗、清潔劑和拋光劑、膠粘劑、瀝青乳液、水可稀釋性系統和水包油乳液。 | Request Sample |
| HDK® H15 | Wacker Chemical Corporation | 合成的憎水的無定形矽土，通過火焰水解法制備 | Request Sample |
| LAPONITE® RDS | BYK | Laponite® RDS是一種人工合成的層狀矽酸鹽，含無機聚磷酸鹽膠溶劑。它在水裏水合和膨脹後成為清澈無色的膠體分散體，具有低粘度，稱為溶膠。在水中10％濃度時，將保持自由流動24小時。添加少量電解質後，會快速形成高觸變性凝膠。本產品用於各種水性配方，為其賦予剪切敏感特性，包括家用和工業表面塗料，清潔劑，農藥和園藝產品。 | |
| LAPONITE® SL25 | BYK | Laponite® SL25是專利分散劑改性的合成層狀矽酸鹽可現用的液體乳液。供應形式為水中25％固體含量，Laponite® SL25是一種半透明的無色低粘度的液體分散體。在配方中加入，例如樹脂，表面活性劑或顏料，會迅速形成高觸變性凝膠。它用於各種水性配方，為其賦予剪切敏感特性，包括DIY和工業表面塗料，家用清潔劑，陶瓷和農業化學產品。 | |
| LAPONITE® S482 | BYK | Laponite® S482是專利分散劑改性的合成層狀矽酸鹽。它在水裏水合和膨脹後成為半透明無色的膠體分散體，稱為溶膠。在水中25％的固體濃度時，將保持自由流動長達1年。添加少量的電解液後，或在配方中加入，例如樹脂，表面活性劑或顏料，會迅速形成高觸變性凝膠。它用於各種水性配方，為其賦予剪切敏感特性，包括DIY和工業表面塗料，家用清潔劑，陶瓷和農業化學產品。 | |
| CLAYTONE-MPZ | BYK | TIXOGEL® MPZ是最高性能有機粘土系列產品。它是一種高效觸變增稠劑、抗沉降劑，用於中等到高極性的的系統。高極性體系中沒必要添加活化劑是一種規則，但對於中等極性體系有益。 | |
| GARAMITE® 7303 | BYK | GARAMITE®7303i采用了專利的混合礦物觸變膠（MMT）的技術開發。MMT技術提供的性能優勢是傳統的有機粘土添加劑不可能提供的。傳統的有機粘土是非常難以分散，通常要求非常高的剪切混合，以及一個極性活化劑以幫助剝離粘土片層的聚集。由於本產品的多粒子形貌，粉末很容易分散到油或溶劑中，只需中等剪切力。 相比於其他的增稠添加劑GARAMITE®7303i表現出非常獨特的流變曲線。可以通過將本品放入配方中獲得非常高的低剪切粘度，從而導致傑出的防沉降和抗脫水收縮性。然而，當施加剪切力時，粘度迅速降低，...展開 GARAMITE®7303i采用了專利的混合礦物觸變膠（MMT）的技術開發。MMT技術提供的性能優勢是傳統的有機粘土添加劑不可能提供的。傳統的有機粘土是非常難以分散，通常要求非常高的剪切混合，以及一個極性活化劑以幫助剝離粘土片層的聚集。由於本產品的多粒子形貌，粉末很容易分散到油或溶劑中，只需中等剪切力。 相比於其他的增稠添加劑GARAMITE®7303i表現出非常獨特的流變曲線。可以通過將本品放入配方中獲得非常高的低剪切粘度，從而導致傑出的防沉降和抗脫水收縮性。然而，當施加剪切力時，粘度迅速降低，該特性使其具有良好的施工性能。 收起 | |
| GARAMITE® 7305 | BYK | GARAMITE® 7305采用了專利的混合礦物觸變膠（MMT）的技術開發。MMT技術提供的性能優勢是傳統的有機粘土添加劑不可能提供的。傳統的有機粘土是非常難以分散，通常要求非常高的剪切混合，以及一個極性活化劑以幫助剝離粘土片層的聚集。由於本產品的多粒子形貌，粉末很容易分散到油或溶劑中，只需中等剪切力。 相比於其他的增稠添加劑GARAMITE®7305表現出非常獨特的流變曲線。可以通過將本品放入配方中獲得非常高的低剪切粘度，從而導致傑出的防沉降和抗脫水收縮性。然而，當施加剪切力時，粘度迅速降低，該...展開 GARAMITE® 7305采用了專利的混合礦物觸變膠（MMT）的技術開發。MMT技術提供的性能優勢是傳統的有機粘土添加劑不可能提供的。傳統的有機粘土是非常難以分散，通常要求非常高的剪切混合，以及一個極性活化劑以幫助剝離粘土片層的聚集。由於本產品的多粒子形貌，粉末很容易分散到油或溶劑中，只需中等剪切力。 相比於其他的增稠添加劑GARAMITE®7305表現出非常獨特的流變曲線。可以通過將本品放入配方中獲得非常高的低剪切粘度，從而導致傑出的防沉降和抗脫水收縮性。然而，當施加剪切力時，粘度迅速降低，該特性使其具有良好的施工性能。它最適合用於中等到高極性體系。 收起 |
