| 2002A | GIMEL Technical Materials | 2002A is a difunctional special modified urethane acrylate used in UV inkjets, flexo inks, adhesives, nail gels, and high-solid coatings. With excellent toughness and a fast curing response, it provides good adhesion to glass, metal, and plastic with exce...view more 2002A is a difunctional special modified urethane acrylate used in UV inkjets, flexo inks, adhesives, nail gels, and high-solid coatings. With excellent toughness and a fast curing response, it provides good adhesion to glass, metal, and plastic with excellent pigment wetting and high gloss. It is suitable for use in UV inkjet, flexo ink, adhesive, nail gel, and high solid coating. view less | Request Sample |
| 6031 | GIMEL Technical Materials | 6031 is a trifunctional polyester acrylate used in inks and coatings for glass and metal. It has excellent adhesion to glass and metal with good pigment wetting and boiling water resistance. | Request Sample |
| Aluminum Primer/B3320 | Tianjin Boyuan New Materials Co., Ltd. | Aluminum Primer B3320 is a kind of waterbased primer which was applied for PET film Aluminum pretreatment. Consists of two components A and B, It can increase the surface tension of PET film, and the adhesion between Aluminum layer and PET film. | |
| CF1-141 | NuSil Silicone Technology 1 | CF1-141 is a high technology silicone primer that is specially formulated to be used with platinum-cured systems and is colored red to provide an easy visual determination of surface coverage. It is a lower Volatile Organic Component (VOC) product and air...view more CF1-141 is a high technology silicone primer that is specially formulated to be used with platinum-cured systems and is colored red to provide an easy visual determination of surface coverage. It is a lower Volatile Organic Component (VOC) product and air dries. This primer improves adhesion of addition-cured systems to various substrates such as glass, metals, plastics, ceramics and other silicone materials. view less | |
| CF2-135 | NuSil Silicone Technology 1 | CF2-135 is a silicone primer that is specifically designed to be used with platinum-cured systems where conventional primers will not be sufficient. This product will help to improve the adhesion of addition-cured systems to various substrates such as woo...view more CF2-135 is a silicone primer that is specifically designed to be used with platinum-cured systems where conventional primers will not be sufficient. This product will help to improve the adhesion of addition-cured systems to various substrates such as wood, metals, ceramics, plastics, and other silicone materials. For the best bonding results, be sure that the surface being primed is clean and degreased. view less | |
| CF6-135 | NuSil Silicone Technology 1 | CF6-135 is a one-component, high technology silicone primer that is translucent to preserve visibility with translucent products. It is specially designed to be used with platinum cured systems where conventional primers are insufficient. This product wil...view more CF6-135 is a one-component, high technology silicone primer that is translucent to preserve visibility with translucent products. It is specially designed to be used with platinum cured systems where conventional primers are insufficient. This product will improve the adhesion of addition-cured systems to many different substrates such as glass, metals, plastics, ceramics and other silicone material. view less | |
| EPOCROS™ WS-500 | NIPPON SHOKUBAI CO., LTD. | EPOCROS™ WS-500 acts as a water soluble crosslinker and adhesion promoter. It is a standard acrylic-based oxazoline functionalized reactive copolymer. It offers high reactivity with carboxyl groups and performance expression with even small addition. It e...view more EPOCROS™ WS-500 acts as a water soluble crosslinker and adhesion promoter. It is a standard acrylic-based oxazoline functionalized reactive copolymer. It offers high reactivity with carboxyl groups and performance expression with even small addition. It exhibits crosslinking reaction at low temperature (80-120°C) with no by-product. It provides film properties, low toxicity, fast drying and improved water- & heat resistance. It shows excellent adhesion to polyethylene terephthalate (PET), oriented polypropylene (OPP) and polyvinyl chloride (PVC). EPOCROS™ WS-500 is used in coatings (metals, films, paper, plastics, leather), primer (film, plastics, building materials, automobiles, PVB inks), paints, inks and pigment printing. view less | Request Sample |
| EPOCROS™ WS-700 | NIPPON SHOKUBAI CO., LTD. | EPOCROS™ WS-700 is a VOC-free adhesion promoter and a waterborne crosslinker based on acrylic, high oxazoline functionalized reactive copolymer. It provides film properties, low toxicity, fast drying and improved water- & heat resistance. It allows crossl...view more EPOCROS™ WS-700 is a VOC-free adhesion promoter and a waterborne crosslinker based on acrylic, high oxazoline functionalized reactive copolymer. It provides film properties, low toxicity, fast drying and improved water- & heat resistance. It allows crosslinking reaction at low temperature (80-120°C) and without any by-product. It exhibits high reactivity with carboxyl groups and performance expression with even small addition. It offers excellent adhesion to polyethylene terephthalate (PET), oriented polypropylene (OPP) and polyvinyl chloride (PVC). Recommended for coatings (metals, films, paper, plastics, leather), primer (film, plastics, building materials, automobiles, PVB inks), paints, inks and pigment printing. EPOCROS™ WS-700 has a long pot life for one packaging. view less | Request Sample |
| PAP-110 | FTC Korea Co.,Ltd | PAP-110 has excellent adhesion and weatherability (non-yellowing) properties. It also shows good chemical resistance and good solubility. It is suitable for use in metal adhesion for paint and lacquer, organic solvent-borne and water-borne paints, and tex...view more PAP-110 has excellent adhesion and weatherability (non-yellowing) properties. It also shows good chemical resistance and good solubility. It is suitable for use in metal adhesion for paint and lacquer, organic solvent-borne and water-borne paints, and textile fabrics. view less | Request Sample |
| SP-120 | NuSil Silicone Technology 1 | SP-120 is a silicone primer that is formulated for use with one and two-part RTV systems, and does not need mixing.The translucent color of SP-120 helps to preserve visibility with other translucent products. This primer will also improve the adhesion of ...view more SP-120 is a silicone primer that is formulated for use with one and two-part RTV systems, and does not need mixing.The translucent color of SP-120 helps to preserve visibility with other translucent products. This primer will also improve the adhesion of the RTV systems to other substrates such as metals, ceramics, glass, and wood. view less | |
| SP-121 | NuSil Silicone Technology 1 | SP-121 is a specially formulated silicone primer that is designed to be used with one and two-part RTV systems. This primer is red in color and provides an easy visual determination of surface coverage when using it. It will also improve the adhesion of t...view more SP-121 is a specially formulated silicone primer that is designed to be used with one and two-part RTV systems. This primer is red in color and provides an easy visual determination of surface coverage when using it. It will also improve the adhesion of the RTV systems to various substrates such as glass, metals, rigid plastics, and ceramics. view less | |
| SP-124 | NuSil Silicone Technology 1 | SP-124 is a silicone primer that is designed for use with condensation cured systems where conventional silicone primers are ineffective. This product will help to improve the adhesion of one and two-part condensation cured systems to various substrates s...view more SP-124 is a silicone primer that is designed for use with condensation cured systems where conventional silicone primers are ineffective. This product will help to improve the adhesion of one and two-part condensation cured systems to various substrates such as glass, ceramics, metal, rigid plastics, wood and some composites. It can be applied by wiping, brushing or dipping a uniform thin film onto the substrates. view less | |
| SP-270 | NuSil Silicone Technology 1 | SP-270 is a silicone primer that was specifically designed for use with platinum-cured systems where other conventional primers are insufficient. It is a one-component primer supplied in VM&P Naphtha so it requires no mixing at all. When applied to additi...view more SP-270 is a silicone primer that was specifically designed for use with platinum-cured systems where other conventional primers are insufficient. It is a one-component primer supplied in VM&P Naphtha so it requires no mixing at all. When applied to addition-cured systems with iridite coated materials, it will improve the adhesion. This also holds true with other substrates including glass, metals, some plastics and other silicone materials. view less | |
| SP1-204 | NuSil Silicone Technology 1 | SP1-204 is a specially formulated translucent primer that is designed for use with one and two-part RTV systemts. This primer requires no mixing and air dries. It is an ideal product to help improve the adhesion of one and two-part systems to various subs...view more SP1-204 is a specially formulated translucent primer that is designed for use with one and two-part RTV systemts. This primer requires no mixing and air dries. It is an ideal product to help improve the adhesion of one and two-part systems to various substrates such as glass, metals, plastics, ceramics and wood. view less |
