| DAOTAN® TW 6495/35WA | Allnex | DAOTAN® TW 6495/35WA is a waterborne, aliphatic polyurethane dispersion, free of solvents and emulsifiers. Dried at elevated temperature it provides transparent, crack-free films. It is recommended for waterborne plastic primers and basecoats. | Request Sample |
| DAOTAN® TW 7000/40WA | Allnex | Daotan® TW 7000/40WA is a polyurethane dispersion with low viscosity, free of organic solvents and emulsifiers. It is specifically recommended for plastic coatings (primer, basecoats, monocoats) for automotive interior/exterior industry, utility vehicles,...weiterlesen Daotan® TW 7000/40WA is a polyurethane dispersion with low viscosity, free of organic solvents and emulsifiers. It is specifically recommended for plastic coatings (primer, basecoats, monocoats) for automotive interior/exterior industry, utility vehicles, for foil-coatings as well as for general industry (e.g. household articles). verkürzen | Request Sample |
| DAOTAN® TW 7010/36WA | Allnex | DAOTAN® TW 7010/36WA is a polyurethane dispersion with low viscosity, free of emulsifiers. It is specifically recommended for printing inks, plastic coatings (primer, basecoats, monocoats) for automotive interior/exterior industry, utility vehicles, for f...weiterlesen DAOTAN® TW 7010/36WA is a polyurethane dispersion with low viscosity, free of emulsifiers. It is specifically recommended for printing inks, plastic coatings (primer, basecoats, monocoats) for automotive interior/exterior industry, utility vehicles, for foil-coatings as well as for general industry (e.g. household articles). Highest water and chemical resistance, high Tg, verkürzen | Request Sample |
| DAOTAN® TW 7050/34WA | Allnex | DAOTAN® TW 7050/34WA is an acrylic modified high molecular weight polyurethane dispersion. The resin provides shear stability and is free of emulsifiers. Dried at ambient temperature Daotan TW 7050 yields clear and crack-free films without any previous ad...weiterlesen DAOTAN® TW 7050/34WA is an acrylic modified high molecular weight polyurethane dispersion. The resin provides shear stability and is free of emulsifiers. Dried at ambient temperature Daotan TW 7050 yields clear and crack-free films without any previous addition of solvents or paint additives. verkürzen | Request Sample |
| DAOTAN® TW 7061/35WA | Allnex | DAOTAN® TW 7061/35WA is a polyester-based, acrylic modified high molecular weight polyurethane dispersion. The resin provides shear stability and is free of solvents and emulsifiers. Dried at ambient temperature Daotan TW 7061 yields clear and crack-free ...weiterlesen DAOTAN® TW 7061/35WA is a polyester-based, acrylic modified high molecular weight polyurethane dispersion. The resin provides shear stability and is free of solvents and emulsifiers. Dried at ambient temperature Daotan TW 7061 yields clear and crack-free films without any previous addition of solvents or paint additives. verkürzen | Request Sample |
| DAOTAN® TW 7063/36WA | Allnex | DAOTAN® TW 7063/36WA is a polyester-based, acrylic modified high molecular weight polyurethane dispersion. The resin provides shear stability and is free of solvents and emulsifiers. Dried at ambient temperature Daotan TW 7063 yields clear and crack-free ...weiterlesen DAOTAN® TW 7063/36WA is a polyester-based, acrylic modified high molecular weight polyurethane dispersion. The resin provides shear stability and is free of solvents and emulsifiers. Dried at ambient temperature Daotan TW 7063 yields clear and crack-free films without any previous additions of solvents or paint additives. verkürzen | Request Sample |
| DAOTAN® TW 7064/36WA | Allnex | DAOTAN® TW 7064/36WA is a shear stable, solvent-free, self-crosslinking acrylated polyurethane dispersion providing quick drying and good wetting properties. Cured films are clear - transparent with good chemical- and abrasion resistance. | Request Sample |
| DAOTAN® TW 7065/36WA | Allnex | DAOTAN® TW 7065/36WA is a shear stable, solvent-free, self-crosslinking acrylated polyurethane dispersion providing quick drying and good wetting properties. Cured films are clear - transparent with good chemical and abrasion resistance. | Request Sample |
| DAOTAN® TW 7066/36WA | Allnex | DAOTAN® TW 7066/36WA is a polyester-based, acrylic modified, high molecular weight polyurethane dispersion. The resin provides shear stability and is free of solvents and emulsifiers. Dried at ambient temperature Daotan TW 7066 yields clear and crack-free...weiterlesen DAOTAN® TW 7066/36WA is a polyester-based, acrylic modified, high molecular weight polyurethane dispersion. The resin provides shear stability and is free of solvents and emulsifiers. Dried at ambient temperature Daotan TW 7066 yields clear and crack-free films without any previous addition of solvents or paint additives. verkürzen | Request Sample |
| DAOTAN® VTW 1225/40WA | Allnex | Daotan® VTW 1225/40WA is an aqueous, aliphatic polyurethane dispersion which contains hydroxy groups. It has highly flexible coating systems especially for primers and decorative top coats for plastics. | Request Sample |
| DAOTAN® VTW 1250/40WA | Allnex | Daotan® VTW 1250/40WA is an aromatic polyurethane-dispersion modified with drying fatty acids. It's used as a sole binder for corrosion protection systems. | Request Sample |
| DAOTAN® VTW 1262/35WA | Allnex | Daotan® VTW 1262/35WA is a polyurethane emulsion that needs no further film formers to give clear flexible films when dried at room temperature. | Request Sample |
| DAOTAN® VTW 1265/36WA | Allnex | Daotan® VTW 1265/36WA is an aqueous, solvent-free, self crosslinking polyurethane dispersion. It can be preferably used for plastic coatings. | Request Sample |
| DAOTAN® VTW 1686/40WA | Allnex | Daotan® VTW 1686/40WA is a polyester-modified acrylic dispersion containing epoxy groups used as sole binder or in combination with melamine resins and/or polyurethane dispersions for the production of waterdilutable industrial paints, e.g. base coats. | Request Sample |
| DAOTAN® VTW 2229/40WANMP | Allnex | Daotan® VTW 2229/40WANMP is a hydroxy functional polyurethane dispersion with shear stability, pigment compatibility giving highly flexible films when cured with isocyanates as well as melamine resins. It is suited for formulating aqueous primer surfacers...weiterlesen Daotan® VTW 2229/40WANMP is a hydroxy functional polyurethane dispersion with shear stability, pigment compatibility giving highly flexible films when cured with isocyanates as well as melamine resins. It is suited for formulating aqueous primer surfacers. verkürzen | Request Sample |
| DAOTAN® VTW 6421/42WA | Allnex | Daotan® VTW 6421/42WA is a waterborn, clear solution of polyurethane resin, and has excellent adhesion and flexibility properties. It can be used as additional binder in 1pack and 2pack coating formulations and adhesives. | Request Sample |
| DAOTAN® VTW 6460/35WA | Allnex | Daotan® VTW 6460/35WA is an aqueous polyurethane dispersion, solvent-free. It is suitable for the formulation of aqueous, ambient temperature or force dried industrial coatings - especially aqueous basecoats for the automotive industry. | Request Sample |
| DAOTAN® VTW 6462/36WA | Allnex | Daotan® VTW 6462/36WA is an aqueous dispersion of an aliphatic urethane-acryl-hybrid, self cross-linking, solvent and emulsifier free. This polyurethane emulsion was designed to formulate coating systems for various plastics such as ABS, PA, rigid PVC, fl...weiterlesen Daotan® VTW 6462/36WA is an aqueous dispersion of an aliphatic urethane-acryl-hybrid, self cross-linking, solvent and emulsifier free. This polyurethane emulsion was designed to formulate coating systems for various plastics such as ABS, PA, rigid PVC, flexible PVC and PMMA. Aqueous primers and base coats can be formulated. verkürzen | Request Sample |
| DAOTAN® VTW 6463/36WA | Allnex | Daotan® VTW 6463/36WA is an aqueous dispersion of an aliphatic urethane-acryl-hybrid, solvent and emulsifier free. It has very good wetting properties, and quick curing to give clear crack-free films. | Request Sample |
| Deco-Coat DC-2501R | Epoxies, Etc. | Deco-Coat DC-2501R is a two part, high gloss, epoxy resin that forms a hard enamel "bubble free" finish. It is solvent- and odor-free, produces a tough, durable coating, and displays excellent adhesion. This product is ideal for applications such as costu...weiterlesen Deco-Coat DC-2501R is a two part, high gloss, epoxy resin that forms a hard enamel "bubble free" finish. It is solvent- and odor-free, produces a tough, durable coating, and displays excellent adhesion. This product is ideal for applications such as costume and fashion jewelry, decals, labels, pins, emblems, and wooden floors and tables. verkürzen | |
| Deco-Coat DC-2510 | Epoxies, Etc. | Deco-Coat DC-2510 is an ultra clear, two part, rigid epoxy doming resin. It is a low viscosity formulation with UV stabilizers and other additives which helps prevent premature yellowing and degradation. It will cure at room temperature or may be accelera...weiterlesen Deco-Coat DC-2510 is an ultra clear, two part, rigid epoxy doming resin. It is a low viscosity formulation with UV stabilizers and other additives which helps prevent premature yellowing and degradation. It will cure at room temperature or may be accelerated with mild heat and contains a proprietary air release additive which allows for an air bubble free high gloss dome coating. verkürzen | |
| Deco-Coat DC-2550 | Epoxies, Etc. | Deco-Coat DC-2550 is a low viscosity, two part, flexible epoxy doming resin that cures at room temperature to form a “bubble free”, flexible coating, impervious to moisture and chemicals. Exhibiting excellent adhesion to a variety of substrates, this prod...weiterlesen Deco-Coat DC-2550 is a low viscosity, two part, flexible epoxy doming resin that cures at room temperature to form a “bubble free”, flexible coating, impervious to moisture and chemicals. Exhibiting excellent adhesion to a variety of substrates, this product is ideal for use in applications such as labels, plaques, emblems, badges, key & luggage tags, and wood trim kits. verkürzen | |
| Decotherm™ 260 E | Lawter | Decotherm™ 260 E is a polyester resin dissolved in tripropylene glycol that has the benefit of high pigment wetting, gloss, flow and transfer on high speed presses. It also has good adhesion to metals which is why it is considered ideal for use in metal d...weiterlesen Decotherm™ 260 E is a polyester resin dissolved in tripropylene glycol that has the benefit of high pigment wetting, gloss, flow and transfer on high speed presses. It also has good adhesion to metals which is why it is considered ideal for use in metal deco inks. Such inks use the spindle printing or dry offset system of printing on 2-piece cans. verkürzen | |
| Decotherm™ 290 E | Lawter | Decotherm™ 290 E is a structured polyester resin that has low tack and misting properties, shows good transfer on high speed presses and displays adhesion to metals. It is used in metal deco inks using the spindle printing or dry offset method for 2-piece...weiterlesen Decotherm™ 290 E is a structured polyester resin that has low tack and misting properties, shows good transfer on high speed presses and displays adhesion to metals. It is used in metal deco inks using the spindle printing or dry offset method for 2-piece cans. It shows good color retention and is also used in white and colored ink applications. verkürzen | |
| DEGACRYL® HS 4150 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4150 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyeth...weiterlesen DEGACRYL® HS 4150 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4150 E will give good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. verkürzen | Request Sample |
| DEGACRYL® HS 4151 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4151 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyre...weiterlesen DEGACRYL® HS 4151 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primered with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. verkürzen | Request Sample |
| DEGACRYL® HS 4174 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4174 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4174 E achieves direct adhesion on aluminium and PET. Usage as an universal binder in PVC-free heat seal lacquers for sealing alum...weiterlesen DEGACRYL® HS 4174 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4174 E achieves direct adhesion on aluminium and PET. Usage as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). verkürzen | Request Sample |
| DEGACRYL® HS 4220 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4220 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyet...weiterlesen DEGACRYL® HS 4220 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4220 E will achieve good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. verkürzen | Request Sample |
| DEGACRYL® HS 4221 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4221 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyre...weiterlesen DEGACRYL® HS 4221 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. verkürzen | Request Sample |
| DEGACRYL® HS 4240 D | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4240 D is an aqueous emulsion of a thermoplastic, pure acrylic resin. Major application is binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4240 D achieves direct adhesion ...weiterlesen DEGACRYL® HS 4240 D is an aqueous emulsion of a thermoplastic, pure acrylic resin. Major application is binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4240 D achieves direct adhesion to aluminum, no primer is required. verkürzen | Request Sample |
| DEGACRYL® HS 4250 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4250 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyeth...weiterlesen DEGACRYL® HS 4250 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4250 E will achieve good adhesion to aluminium in formulation with PVC-copolymer. Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® VP 4250 E has a higher solid content compared to the equivalent grade DEGACRYL® 4150 E. verkürzen | Request Sample |
| DEGACRYL® HS 4251 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4251 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. DEGACRYL® HS 4251 E is applied as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), poly...weiterlesen DEGACRYL® HS 4251 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. DEGACRYL® HS 4251 E is applied as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® HS 4251 E has a higher solid content compared to the equivalent grade DEGACRYL® HS 4151 E. verkürzen | Request Sample |
| DEGACRYL® HS 4294 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4294 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. It is suitable as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polysty...weiterlesen DEGACRYL® HS 4294 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. It is suitable as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET), polylactic acid (PLA) or vinyl (PVC). Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® HS 4294 E has a high solid content of 52%. verkürzen | Request Sample |
| DEGACRYL® HS 4322 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4322 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4322 E achieves direct adhesion on aluminium and PET. Due to its low haze properties when dry coated, it is ideally suited for tra...weiterlesen DEGACRYL® HS 4322 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4322 E achieves direct adhesion on aluminium and PET. Due to its low haze properties when dry coated, it is ideally suited for transparent applications. General usage is as a binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polystyrene (PS), polyethylene terephthalate (PET), poly lactic acid (PLA) and polyvinyl chloride (PVC). verkürzen | Request Sample |
| DEGACRYL® HS 4792 L | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4792 L is an organic solution based on ethyl methacrylate. It is suitable as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4792 L is tailormade for applicati...weiterlesen DEGACRYL® HS 4792 L is an organic solution based on ethyl methacrylate. It is suitable as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4792 L is tailormade for applications where low temperature sealing and easy peel behavior are required. In formulations with PVC copolymer DEGACRYL® HS 4792 L will achieve good adhesion to aluminium. verkürzen | Request Sample |
| DEGACRYL® HS 555 | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 555 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethyle...weiterlesen DEGACRYL® HS 555 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 555 will give good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. verkürzen | Request Sample |
| DEGACRYL® HS 666 | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 666 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene ...weiterlesen DEGACRYL® HS 666 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primered with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. verkürzen | Request Sample |
| D.E.H.™ 20 | Univar Solutions | D.E.H.™ 20 is an economical diethylenetriamine (DETA) aliphatic polyamine hardener that provides a short pot-life and cures in minutes with standard unmodified liquid epoxy resins. It is used for civil engineering applications, maintenance paints, and in ...weiterlesen D.E.H.™ 20 is an economical diethylenetriamine (DETA) aliphatic polyamine hardener that provides a short pot-life and cures in minutes with standard unmodified liquid epoxy resins. It is used for civil engineering applications, maintenance paints, and in the manufacture of epoxy-amine adducts. It is also used in adhesives, epoxy composite applications and as an accelerator for polyamide curing agents. verkürzen | Request Sample |
| D.E.H.™ 24 | Univar Solutions | D.E.H.™ 24 is an economical aliphatic polyamine hardener, triethylenetetraamine (TETA), that offers a short pot-life and cures in minutes with standard unmodified liquid epoxy resins. It provides lower vapor hazard to workers due to its higher boiling poi...weiterlesen D.E.H.™ 24 is an economical aliphatic polyamine hardener, triethylenetetraamine (TETA), that offers a short pot-life and cures in minutes with standard unmodified liquid epoxy resins. It provides lower vapor hazard to workers due to its higher boiling point, and is used for maintenance paints, the manufacture of epoxyamine adducts, in adhesives, and civil engineering applications. It is also used as an accelerator for polyamide curing agents. verkürzen | Request Sample |
| D.E.H.™ 29 | Univar Solutions | D.E.H.™ 29 is an economical, complex mixture of linear, branched and cyclic ethylene amines, offering more flexibility versus DETA, TETA, and TEPA type materials. It is recommended for epoxy coal tar systems, patch kits, two-pack adhesives, and other appl...weiterlesen D.E.H.™ 29 is an economical, complex mixture of linear, branched and cyclic ethylene amines, offering more flexibility versus DETA, TETA, and TEPA type materials. It is recommended for epoxy coal tar systems, patch kits, two-pack adhesives, and other applications where color is not a limitation. In adhesives, it yields much higher peel strength than DETA or TETA at comparable gel times and lower cost. verkürzen | Request Sample |
| D.E.H.™ 39 | Univar Solutions | D.E.H.™ 39 is a low viscosity aliphatic polyamine based on aminoethylpiperazine (AEP), providing a short pot-life and cures in minutes with liquid epoxy resins. It is used for maintenance paints, the manufacture of epoxy-amine adducts, in adhesives, civil...weiterlesen D.E.H.™ 39 is a low viscosity aliphatic polyamine based on aminoethylpiperazine (AEP), providing a short pot-life and cures in minutes with liquid epoxy resins. It is used for maintenance paints, the manufacture of epoxy-amine adducts, in adhesives, civil engineering applications and as an accelerator for polyamide curing agents. In electrical applications, it is used for casting, potting and encapsulation. It is often used for epoxy composite materials. verkürzen | Request Sample |
| D.E.H.™ 4909 | Univar Solutions | D.E.H.™ 4909 is a modified polyamine fast curing in thin films, excellent wetting properties on concrete surface, excellent adhesion on concrete. It may be formulated with liquid Bisphenol A and/or Bisphenol F epoxy resins for low temperature applications...weiterlesen D.E.H.™ 4909 is a modified polyamine fast curing in thin films, excellent wetting properties on concrete surface, excellent adhesion on concrete. It may be formulated with liquid Bisphenol A and/or Bisphenol F epoxy resins for low temperature applications, and concrete primers. Manufactured without benzyl alcohol and nonylphenol. verkürzen | Request Sample |
| D.E.H.™ 52 | Univar Solutions | D.E.H.™ 52 is a viscous aliphatic polyamine epoxy adduct curing agent combines polyamine properties such as short pot life and rapid cure at room temperature with those of typical polyamide curing agents including easy handling, convenient viscosity and m...weiterlesen D.E.H.™ 52 is a viscous aliphatic polyamine epoxy adduct curing agent combines polyamine properties such as short pot life and rapid cure at room temperature with those of typical polyamide curing agents including easy handling, convenient viscosity and mixing rates with liquid epoxy resins, however it is much less hygroscopic than standard polyamines. Applications include maintenance paints, in two-pack adhesives, civil engineering, castings and hand lay-up laminates and particularly suitable for colorless systems. verkürzen | Request Sample |
| D.E.H.™ 530E32 | Univar Solutions | D.E.H.™ 530E32 is a cycloaliphatic amine cure agent for epoxy resin systems with low color, blush-free, especially designed for ambient and low temperature cure applications. | Request Sample |
| D.E.H.™ 545 | Univar Solutions | D.E.H.™ 545 is a low viscosity formulated polyamidoamine adduct specially designed for wet application areas. It may be formulated with liquid Bisphenol A and/or Bisphenol F epoxy resins for optimum adhesion on dry and wet concrete substrates. D.E.R™ 353 ...weiterlesen D.E.H.™ 545 is a low viscosity formulated polyamidoamine adduct specially designed for wet application areas. It may be formulated with liquid Bisphenol A and/or Bisphenol F epoxy resins for optimum adhesion on dry and wet concrete substrates. D.E.R™ 353 and D.E.R 324 are recommended epoxy resins for use with D.E.H 545 as a starting formulation of primer systems. verkürzen | Request Sample |
| D.E.H.™ 546 | Univar Solutions | D.E.H.™ 546 is a low viscosity modified cycloaliphatic amine intended for ambient curing of liquid epoxy resins, providing good corrosion protection. Applications include industrial flooring, primers and sealers. | Request Sample |
| D.E.H.™ 554 | Univar Solutions | D.E.H.™ 554 is a modified cycloaliphatic amine used as a curing for epoxy resins and specially designed for applications requiring self leveling. It offers a good low temperature cure and low viscosity, potential high gloss, good color stability, low visc...weiterlesen D.E.H.™ 554 is a modified cycloaliphatic amine used as a curing for epoxy resins and specially designed for applications requiring self leveling. It offers a good low temperature cure and low viscosity, potential high gloss, good color stability, low viscosity. Typical applications include self leveling flooring, concrete sealers and high solid coatings. verkürzen | Request Sample |
| D.E.H.™ 561 | Univar Solutions | D.E.H.™ 561 is a low viscosity, formulated, modified cycloaliphatic amine with low color and fast cure at low temperatures, is specially designed for use in high solids coatings, self leveling and screed floors. | Request Sample |
| D.E.H.™ 570 | Univar Solutions | D.E.H.™ 570 is a low viscosity modified cycloaliphatic amine hardener. DEH 570 imparts high strength and excellent chemical resistance. | Request Sample |
| D.E.H.™ 58 | Univar Solutions | D.E.H.™ 58 is extremely reactive with liquid epoxy resins at room temperature and is used in maintenance paints, 2-pack adhesives, civil engineering, castings and hand lay-up laminates. D.E.H.™ 58 Curing Agent is particularly suitable for colorless coatin...weiterlesen D.E.H.™ 58 is extremely reactive with liquid epoxy resins at room temperature and is used in maintenance paints, 2-pack adhesives, civil engineering, castings and hand lay-up laminates. D.E.H.™ 58 Curing Agent is particularly suitable for colorless coatings or adhesive systems. verkürzen | Request Sample |
| D.E.H.™ 582 | Univar Solutions | D.E.H.™ 582 is a cycloaliphatic amine hardener used as a curing agent for epoxy resins resulting in a non-blushing product with good water spot resistance and excellent chemical resistance. | Request Sample |
| D.E.H.™ 590 | Univar Solutions | D.E.H.™ 590 is a curing agent specifically designed for high chemical resistance. | Request Sample |
| D.E.H.™ 598B | Univar Solutions | D.E.H.™ 598B is a modified aliphatic amine hardener used as a curing agent for epoxy resins for rapid-set and low temperatures cure systems with high gloss and high strength. | Request Sample |
| D.E.H.™ 615 | Univar Solutions | D.E.H.™ 615 is a solvent free Mannich base curing agent suitable curing above 0°C. | Request Sample |
| D.E.H.™ 622 | Univar Solutions | D.E.H.™ 622 is a modified amine curing agent suitable to be formulated with liquid Bisphenol A and/or Bisphenol F epoxy resins. | Request Sample |
| D.E.H.™ 653 | Univar Solutions | D.E.H.™ 653 is a modified amine curing agent for epoxy resins. | Request Sample |
| D.E.H.™ 81 | Univar Solutions | D.E.H.™ 81 is a phenolic curing agent of intermediate reactivity containing curing catalyst as well as a polyacrylate flow modifier. The intermediate reactivity makes D.E.H.™ 81 particularly suitable as a starting base for product development. | Request Sample |
| D.E.H.™ 82 | Univar Solutions | D.E.H.™ 82 is a high reactivity phenolic curing agent containing curing catalyst as well as a polyacrylate flow modifier. Can be formulated in low temperature applications in combination with D.E.R.™ 6615 solid epoxy resin. | Request Sample |
| D.E.H.™ 84 | Univar Solutions | D.E.H.™ 84 is a curing agent based on an unmodified solid reaction product of liquid epoxy resin and bisphenol A containing about 2% of a curing accelerator. | Request Sample |
| D.E.H.™ 85 | Univar Solutions | D.E.H.™ 85 is a phenolic hardener based on an unmodified solid reaction product of liquid epoxy resin and bisphenol A. | Request Sample |
| D.E.H.™ 87 | Univar Solutions | D.E.H.™ 87 is a higher molecular weight curing agent based on an unmodified solid reaction product of liquid epoxy resin and bisphenol A. Designed primarily for functional powder coating applications requiring a high degree of flexibility and a good stora...weiterlesen D.E.H.™ 87 is a higher molecular weight curing agent based on an unmodified solid reaction product of liquid epoxy resin and bisphenol A. Designed primarily for functional powder coating applications requiring a high degree of flexibility and a good storage stability. verkürzen | Request Sample |
| D.E.H.™ 90 | Univar Solutions | D.E.H.™ 90 is a solid reaction product of liquid epoxy resin and polyphenols containing polyacrylate flow modifier and 2% curing accelerator. Designed for powder coating applications that require fast cure capability and low curing temperature, combined w...weiterlesen D.E.H.™ 90 is a solid reaction product of liquid epoxy resin and polyphenols containing polyacrylate flow modifier and 2% curing accelerator. Designed for powder coating applications that require fast cure capability and low curing temperature, combined with superior adhesion property to metal substrates. Fully compatible with other D.E.H.™ 80 series epoxy curing agents. verkürzen | Request Sample |
| D.E.N.™ 425 | Univar Solutions | D.E.N.™ 425 is an approximately 2.5 functional liquid epoxy novolac resin bridging between standard liquid epoxy resin and semi-solid epoxy novolac resins. Offers excellent mechanical properties and solvent resistance properties when used in combination w...weiterlesen D.E.N.™ 425 is an approximately 2.5 functional liquid epoxy novolac resin bridging between standard liquid epoxy resin and semi-solid epoxy novolac resins. Offers excellent mechanical properties and solvent resistance properties when used in combination with a fast curing agent. D.E.N.™ 425 requires no post-cure. verkürzen | Request Sample |
| D.E.N.™ 426 | Univar Solutions | D.E.N.™ 426 is a liquid reaction product of epichlorohydrin and phenol-formaldehyde novolac. | Request Sample |
| D.E.N.™ 431 | Univar Solutions | D.E.N.™ 431 is a multi-functional (±2.8) epoxy novolac resin of lower molecular weight. Offers elevated temperature service and excellent chemical resistance. It can be used where solvents cannot be tolerated and application viscosity (temperature) needs ...weiterlesen D.E.N.™ 431 is a multi-functional (±2.8) epoxy novolac resin of lower molecular weight. Offers elevated temperature service and excellent chemical resistance. It can be used where solvents cannot be tolerated and application viscosity (temperature) needs to remain relatively low. D.E.N.™ 431 is used in adhesives, electrical and structural laminates and casting applications. verkürzen | Request Sample |
| D.E.N.™ 438 | Univar Solutions | D.E.N.™ 438 by Olin is a highly functional (±3.6) epoxy novolac resin. Offers good mechanical resistance, good temperature resistance, good chemical resistance performance and workable viscosity. D.E.N.™ 438 is recognized as a standard for high-temperatur...weiterlesen D.E.N.™ 438 by Olin is a highly functional (±3.6) epoxy novolac resin. Offers good mechanical resistance, good temperature resistance, good chemical resistance performance and workable viscosity. D.E.N.™ 438 is recognized as a standard for high-temperature applications. verkürzen | Request Sample |
| D.E.N.™ 438 EK85 | Univar Solutions | D.E.N.™ 438-EK85 by Olin is a highly functional (±3.6) epoxy novolac resin in methyl-ethyl ketone solution. Offers good mechanical resistance, good temperature resistance, good chemical resistance performance and workable viscosity. D.E.N.™ 438-EK85 is ma...weiterlesen D.E.N.™ 438-EK85 by Olin is a highly functional (±3.6) epoxy novolac resin in methyl-ethyl ketone solution. Offers good mechanical resistance, good temperature resistance, good chemical resistance performance and workable viscosity. D.E.N.™ 438-EK85 is mainly used for laminating or prepreg applications. verkürzen | Request Sample |
| D.E.N.™ 438-A85 | Univar Solutions | D.E.N.™ 438-A85 by Olin is a highly functional (±3.6) epoxy novolac resin in acetone solution. Offers good mechanical resistance, good temperature resistance, good chemical resistance performance and workable viscosity. D.E.N.™ 438-A85 is mainly used for ...weiterlesen D.E.N.™ 438-A85 by Olin is a highly functional (±3.6) epoxy novolac resin in acetone solution. Offers good mechanical resistance, good temperature resistance, good chemical resistance performance and workable viscosity. D.E.N.™ 438-A85 is mainly used for laminating or prepreg applications. verkürzen | Request Sample |
| D.E.N.™ 438L | Univar Solutions | D.E.N.™ 438L by Olin is a highly functional (±3.6) epoxy novolac resin. Offers good mechanical resistance, good temperature resistance, good chemical resistance performance and low viscosity. D.E.N.™ 438L is recognized as a standard for high-temperature a...weiterlesen D.E.N.™ 438L by Olin is a highly functional (±3.6) epoxy novolac resin. Offers good mechanical resistance, good temperature resistance, good chemical resistance performance and low viscosity. D.E.N.™ 438L is recognized as a standard for high-temperature applications and higher solid formulations. verkürzen | Request Sample |
| D.E.N.™ 439 | Univar Solutions | D.E.N.™ 439 by Olin is a highly functional (±3.8) epoxy novolac resin. Offers improved reactivity, high viscosity, good drape and limited tack. D.E.N.™ 439 is used prepreg formulations. | Request Sample |
| D.E.N.™ 439 EK85 | Univar Solutions | D.E.N.™ 439 EK85 is a highly functional (±3.8) epoxy novolac resin in methyl-ethyl ketone solution. Offers improved reactivity, high viscosity, good drape and limited tack. D.E.N.™ 439-EK85 is mainly for laminating or prepreg applications. | Request Sample |
| D.E.N.™ 439H | Univar Solutions | D.E.N.™ 439-H by Olin is a highly functional epoxy novolac resin. Offers lower processing variability. | Request Sample |
| DENSURF HR 700A | DKSH | DENSURF HR 700A is ambient curing silicon resin used in heat and corrosion resistant coatings. Thermal stability up to 600-650 °C and corrosion protection are achieved in combination with the suitable formulations. This product is available for North Ame...weiterlesen DENSURF HR 700A is ambient curing silicon resin used in heat and corrosion resistant coatings. Thermal stability up to 600-650 °C and corrosion protection are achieved in combination with the suitable formulations. This product is available for North America and for Japan, India, South Korea, Taiwan and China in Asia (all other countries are excluded). verkürzen | Request Sample |
| DENSURF HR 800 | DKSH | DENSURF HR 800 is an air-drying silicon resin used in heat resistant coatings. It is compatible with organic resins such as alkyd resin. It gives thermal stability up to 650°C when formulated with suitable thermally stable pigments and fillers such as alu...weiterlesen DENSURF HR 800 is an air-drying silicon resin used in heat resistant coatings. It is compatible with organic resins such as alkyd resin. It gives thermal stability up to 650°C when formulated with suitable thermally stable pigments and fillers such as aluminum and iron oxide pigments. This product is available for North America and for Japan, India, South Korea, Taiwan and China in Asia (all other countries are excluded). verkürzen | Request Sample |
| DENSURF HR 900 | DKSH | DENSURF HR 900 is an air-drying silicon resin used in heat resistant coatings. It is compatible with organic resins such as alkyd resin. It gives thermal stability up to 650°C when formulated with suitable thermally stable pigments and fillers such as alu...weiterlesen DENSURF HR 900 is an air-drying silicon resin used in heat resistant coatings. It is compatible with organic resins such as alkyd resin. It gives thermal stability up to 650°C when formulated with suitable thermally stable pigments and fillers such as aluminum and iron oxide pigments. This product is available for North America and for Japan, India, South Korea, Taiwan and China in Asia (all other countries are excluded). verkürzen | Request Sample |
| D.E.R.™ 317 | Univar Solutions | D.E.R.™ 317 is a high viscosity, fast reacting (20% faster than D.E.R.™ 331™) liquid epoxy resin designed for adhesive applications requiring quick gelling with amine curing agents. | Request Sample |
| D.E.R.™ 324 | Univar Solutions | D.E.R.™ 324 offers low viscosity and low surface tension to wet the surface better, giving better adhesion and slightly lower viscosity at any given filler loading. The diluent increases pot life, flexibility (impact resistance) and acid resistance, but l...weiterlesen D.E.R.™ 324 offers low viscosity and low surface tension to wet the surface better, giving better adhesion and slightly lower viscosity at any given filler loading. The diluent increases pot life, flexibility (impact resistance) and acid resistance, but limits the solvent resistance. Prone to crystallization. verkürzen | Request Sample |
| D.E.R.™ 325 | Univar Solutions | D.E.R.™ 325 is a low viscosity liquid epoxy resin with reduced surface tension. Offers excellent wetting and flow. The low diluent content results in the improved mechanical properties over D.E.R.™ 323 and D.E.R.™ 324 epoxy resin. | Request Sample |
| D.E.R.™ 327 | Univar Solutions | D.E.R.™ 327 is a mono-functional reactive diluent modified liquid epoxy resin that has excellent resistance to crystallization. | Request Sample |
| D.E.R.™ 330 | Univar Solutions | D.E.R.™ 330 is a lower viscosity bisphenol A epoxy resin allowing the use of fewer diluents or more fillers in the formulation. Offers longer pot life versus the standard resin and slightly improved resistance properties when used in heat curing (composit...weiterlesen D.E.R.™ 330 is a lower viscosity bisphenol A epoxy resin allowing the use of fewer diluents or more fillers in the formulation. Offers longer pot life versus the standard resin and slightly improved resistance properties when used in heat curing (composite) applications. verkürzen | Request Sample |
| D.E.R.™ 331 | Univar Solutions | D.E.R.™ 331 is an industry standard bisphenol A-based liquid epoxy resin. Offers excellent mechanical, thermal and chemical resistance properties in multiple applications. Shows improved reactivity versus competitive alternatives. | Request Sample |
| D.E.R.™ 332 | Univar Solutions | D.E.R.™ 332 is a high purity diglycidyl ether of bisphenol A. Its high purity and low oligomer content assure uniform performance, exceptionally low viscosity and improved elevated temperature properties over standard epoxy resins. This resin grade is mai...weiterlesen D.E.R.™ 332 is a high purity diglycidyl ether of bisphenol A. Its high purity and low oligomer content assure uniform performance, exceptionally low viscosity and improved elevated temperature properties over standard epoxy resins. This resin grade is mainly used in electrical encapsulation applications. verkürzen | Request Sample |
| D.E.R.™ 337 | Univar Solutions | D.E.R.™ 337 is a semi-solid reaction product of epichlorohydrin and bisphenol A. | Request Sample |
| D.E.R.™ 337-X90 | Univar Solutions | D.E.R.™ 337-X90 is a solution of D.E.R.™ 337 in xylene. Higher solids content than D.E.R.™ 337-X80 epoxy resin solution. | Request Sample |
| D.E.R.™ 353 | Univar Solutions | D.E.R.™ 353 is a low viscosity bisphenol A / bisphenol F epoxy resin blend with very low crystallization tendency. Offers low surface tension to wet the surface better, giving better adhesion. The diluent increases pot life, flexibility (impact resistance...weiterlesen D.E.R.™ 353 is a low viscosity bisphenol A / bisphenol F epoxy resin blend with very low crystallization tendency. Offers low surface tension to wet the surface better, giving better adhesion. The diluent increases pot life, flexibility (impact resistance) and acid resistance. verkürzen | Request Sample |
| D.E.R.™ 354 | Univar Solutions | D.E.R.™ 354 is an unmodified bisphenol F-based epoxy resin of low viscosity. Improves crystallization resistance of other epoxy resins and gives improvement in solvent resistance. Frequently used in solvent-free coatings, floor coverings, adhesives or com...weiterlesen D.E.R.™ 354 is an unmodified bisphenol F-based epoxy resin of low viscosity. Improves crystallization resistance of other epoxy resins and gives improvement in solvent resistance. Frequently used in solvent-free coatings, floor coverings, adhesives or composite applications. verkürzen | Request Sample |
| D.E.R.™ 362 | Univar Solutions | D.E.R.™ 362 is a chemically modified liquid epoxy resin without diluent with minimal crystallization tendency. Offers excellent flow and high gloss coatings/floorings. This resin is used in building applications above and below ground, on road and bridge ...weiterlesen D.E.R.™ 362 is a chemically modified liquid epoxy resin without diluent with minimal crystallization tendency. Offers excellent flow and high gloss coatings/floorings. This resin is used in building applications above and below ground, on road and bridge construction, as well as in underwater applications. verkürzen | Request Sample |
| D.E.R.™ 383 | Univar Solutions | D.E.R.™ 383 is a lower viscosity bisphenol A epoxy resin allowing the use of fewer diluents or more fillers in the formulation. Offers longer pot life versus the standard resin and slightly improved resistance properties when used in heat curing (composit...weiterlesen D.E.R.™ 383 is a lower viscosity bisphenol A epoxy resin allowing the use of fewer diluents or more fillers in the formulation. Offers longer pot life versus the standard resin and slightly improved resistance properties when used in heat curing (composite) applications. verkürzen | Request Sample |
| D.E.R.™ 538-A80 | Univar Solutions | D.E.R.™ 538-A80 is a brominated epoxy resin in acetone with about 20% bromine on solids. Offers less flow during lamination versus D.E.R.™ 530-A80 epoxy resin. | Request Sample |
| D.E.R.™ 642-U | Univar Solutions | D.E.R.™ 642-U is a novolac modified solid resin for functional powder coatings. In combination with other resins it provides excellent corrosion and chemical resistance along with good mechanical properties. | Request Sample |
| D.E.R.™ 660-B80 | Univar Solutions | D.E.R.™ 660-B80 is an intermediate epoxy equivalent weight epoxy resin dissolved in butanol, and is used mainly in adhesives and protective coatings, or as a modifier for other epoxy resins to improve impact strength, extensibility, and adhesion. | Request Sample |
| D.E.R.™ 660-PA80 | Univar Solutions | D.E.R.™ 660-PA80 is a solution of D.E.R.™ 660 epoxy resin in propyl acetate. The solvent choice makes it possible to formulate coatings without solvents listed as hazardous air pollutants. | Request Sample |
| D.E.R.™ 661 | Univar Solutions | D.E.R.™ 661 is an unmodified standard “1-type” solid epoxy resin. Excellent base for many high quality chemical-resistant coatings withstanding exposure to corrosive atmospheres. | Request Sample |
| D.E.R.™ 662 | Univar Solutions | D.E.R.™ 662 is a standard “2-type” epoxy resin with good flow. | Request Sample |
| D.E.R.™ 662-UH | Univar Solutions | D.E.R.™ 662-UH is a low molecular weight “2.5-type” epoxy resin for decorative powder coatings requiring excellent gloss and flow. | Request Sample |
| D.E.R.™ 664 | Univar Solutions | D.E.R.™ 664 is a medium molecular weight “4-type” epoxy resin containing an esterification catalyst. Esters prepared by reacting this resin with fatty acids have very consistent viscosities and acid values. | Request Sample |
| D.E.R.™ 664U | Univar Solutions | D.E.R.™ 664U is a medium molecular weight “4-type” epoxy resin to provide improved gloss and smoothness. | Request Sample |
| D.E.R.™ 664U-E | Univar Solutions | D.E.R.™ 664U-E is a medium molecular weight “4-type” epoxy resin for functional coatings to provide improved flexibility. | Request Sample |
| D.E.R.™ 667-E | Univar Solutions | D.E.R.™ 667-E is a high molecular weight “7-type” solid epoxy resin with improved solution stability. Suitable for metal decoration, interior and exterior can coatings, tube and drum linings, coil primers and many other industrial applications. | Request Sample |
| D.E.R.™ 671-MAK75 | Univar Solutions | D.E.R.™ 671-MAK75 is a solution of D.E.R.™ 671 in methyl n-amyl ketone for industrial protective coatings. | Request Sample |
