| Acronal® 296 D ap | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® 296 D ap is an anionic emulsion polymer with a medium viscosity. It consists of small, finely divided particles. Its compatibility with pigments and extenders is excellent, and it has very high binding power for pigments. Unpigmented films of Acr...view more Acronal® 296 D ap is an anionic emulsion polymer with a medium viscosity. It consists of small, finely divided particles. Its compatibility with pigments and extenders is excellent, and it has very high binding power for pigments. Unpigmented films of Acronal® 296 D ap are tack free at room temperature. Films formed by Acronal® 296 D ap are clear, flexible and glossy, they have extremely high water resistance, and they are very resistant to saponification. It is a general purpose binder, mainly used for the following applications: exterior paints, interior paints, plastic paints for interior application, textured finishes, primers for mineral substrates, and modifying silicate paints and finishes. view less | |
| Acronal® JC 7043 X | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® JC 7043 X an anionic R-C emulsion with very fine particle size and low viscosity. It is a long chain acrylics and styrene copolymer that exhibits excellent penetration into chalky or powdery surface and excellent alkali resistance that is a suita...view more Acronal® JC 7043 X an anionic R-C emulsion with very fine particle size and low viscosity. It is a long chain acrylics and styrene copolymer that exhibits excellent penetration into chalky or powdery surface and excellent alkali resistance that is a suitable for water based penetrating and alkali primer as alternative technology for solvent based. The polymer also impacts very good adhesion to powdery masonry surfaces. Acronal® JC 7043 is suited to manufacture All-in one water based primer. Acronal® JC 7043 X is used mainly for water based penetrating and alkali primers. view less | |
| Adhesion Reinforcing Primer/B3325 | Tianjin Boyuan New Materials Co., Ltd. 天津博苑高新材料有限公司 | B3325 is a kind of water based primer which was especially for film/sheet adhesion reinforcing. It can improve surface performance and ensure excellent adhesion between the coating and the base material. | |
| AFCONA - 1101 | AFCONA Additives Sdn Bhd | AFCONA - 1101 is a modified acrylic polymer in a butyl acetate and methoxy propyl acetate solvent. This product has low concentrate viscosity, provides pigment stability, is widely compatible, and can cross-link in polyurethane systems and baking paints. ...view more AFCONA - 1101 is a modified acrylic polymer in a butyl acetate and methoxy propyl acetate solvent. This product has low concentrate viscosity, provides pigment stability, is widely compatible, and can cross-link in polyurethane systems and baking paints. AFCONA - 1101 functions as a universal dispersing resin for the preparation of universal pigment concentrates, finding application in primers, coatings, paints, and decorative paints. view less | |
| AFCONA - 1102 | AFCONA Additives Sdn Bhd | AFCONA - 1102 is a modified acrylic polymer in a butyl acetate and methoxy propyl acetate solvent. This product provides viscosity reduction, is economic, and is widely compatible, especially in thermoplastic resins and epoxy. AFCONA - 1102 functions as ...view more AFCONA - 1102 is a modified acrylic polymer in a butyl acetate and methoxy propyl acetate solvent. This product provides viscosity reduction, is economic, and is widely compatible, especially in thermoplastic resins and epoxy. AFCONA - 1102 functions as a universal dispersing resin for the preparation of universal pigment concentrates, finding application in primers, coatings, paints, and decorative paints. view less | |
| Anti-static Primer/B3320K | Tianjin Boyuan New Materials Co., Ltd. 天津博苑高新材料有限公司 | B3320K is a kind of water based primer which was research and developed especially for film/sheet anti-static. It can provide long lasting Dissipative function, effective prevention of electrostatic accumulation. | |
| BYD3064 | Tianyi Chemical Engineering Material Co., Ltd. | BYD3064, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in sealer primers for construction applications. This product is waterproof and alkali-resistant. It is compatible with color pastes and cemen...view more BYD3064, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in sealer primers for construction applications. This product is waterproof and alkali-resistant. It is compatible with color pastes and cements. view less | |
| Neboplast® VV 2182 | NECARBO B.V. | Neboplast® VV 2182 is a vinyl acetate and vinyl versatate copolymer dispersion that provides very good alkali resistance, excellent pigment binding properties, and good thixotropic structure. This product was developed for use in thick layer applications ...view more Neboplast® VV 2182 is a vinyl acetate and vinyl versatate copolymer dispersion that provides very good alkali resistance, excellent pigment binding properties, and good thixotropic structure. This product was developed for use in thick layer applications such as plasters, spackles, wall paints, primers, sealers, and mortars. view less | |
| Printing primer/B3320Y | Tianjin Boyuan New Materials Co., Ltd. 天津博苑高新材料有限公司 | B3320Y is a kind of water based primer which was used for increasing printing performance of film/sheet. It can provide long lasting dissipative function, effective prevention of electrostatic accumulation. Consists of two components A and B, It can impro...view more B3320Y is a kind of water based primer which was used for increasing printing performance of film/sheet. It can provide long lasting dissipative function, effective prevention of electrostatic accumulation. Consists of two components A and B, It can improve surface tension and provide good UV printability. view less | |
| Unithane IC-901 | Union Specialties, Inc. | Unithane IC-901 is a NMP containing, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion with good adhesion, flexibility, and automotive grade properties. This product has a gloss at 60º of 75 and a viscosity at 25°C of 10-200cps. It...view more Unithane IC-901 is a NMP containing, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion with good adhesion, flexibility, and automotive grade properties. This product has a gloss at 60º of 75 and a viscosity at 25°C of 10-200cps. It is suitable for use in a formulated primer coat for concrete, graphic arts, adhesives, and exterior coatings. view less | |
| WorléeDur D 46 | Worlée-Chemie G.m.b.H. | WorléeDur D 46 is a short oil epoxy ester based on conjugated drying fatty acids. It is used in air-drying and stoving finishes with outstanding adhesion, rapid drying and good chemical resistance. W´Dur D 46 is compatible with unplasticized urea and mela...view more WorléeDur D 46 is a short oil epoxy ester based on conjugated drying fatty acids. It is used in air-drying and stoving finishes with outstanding adhesion, rapid drying and good chemical resistance. W´Dur D 46 is compatible with unplasticized urea and melamine formaldehyde resins. W´Dur D 46 is an excellent binder for quick-drying primers and top-coats with very good adhesion and chemical resistance. Zinc-rich primers based on W´Dur D 46 have very good stability and anticorrosive properties. view less | |
| WorléeDur D 6311 (60% In Dearomatized HC 140-165) | Worlée-Chemie G.m.b.H. | WorléeDur D 6311 (60% In Dearomatized HC 140-165) is an air drying long oil, modified epoxy ester used for the manufacture of special anticorrosion and adhesion primers. W´Dur D 6311 should not be combined with other binders. Adhesion properties could bec...view more WorléeDur D 6311 (60% In Dearomatized HC 140-165) is an air drying long oil, modified epoxy ester used for the manufacture of special anticorrosion and adhesion primers. W´Dur D 6311 should not be combined with other binders. Adhesion properties could become worse. Primers based on W´Dur D 6311 show good application properties (brush application), good flow and good adhesion properties. view less | |
| WorléeDur D 6311 (60% In Dearomatized HC 160-200) | Worlée-Chemie G.m.b.H. | WorléeDur D 6311 (60% In Dearomatized HC 160-200) is an air drying long oil, modified epoxy ester for the manufacture of special anticorrosion and adhesion primers. W´Dur D 6311 should not be combined with other binders. Adhesion properties could become w...view more WorléeDur D 6311 (60% In Dearomatized HC 160-200) is an air drying long oil, modified epoxy ester for the manufacture of special anticorrosion and adhesion primers. W´Dur D 6311 should not be combined with other binders. Adhesion properties could become worse. Primers based on W´Dur D 6311 show good application properties (brush application), good flow and good adhesion properties. view less | |
| WorléeDur D 6311 (60% In White Spirit 145-195) | Worlée-Chemie G.m.b.H. | WorléeDur D 6311 (60% In White Spirit 145-195) is an air drying long oil, modified epoxy ester for the manufacture of special anticorrosion and adhesion primers. W´Dur D 6311 should not be combined with other binders. Adhesion properties could become wors...view more WorléeDur D 6311 (60% In White Spirit 145-195) is an air drying long oil, modified epoxy ester for the manufacture of special anticorrosion and adhesion primers. W´Dur D 6311 should not be combined with other binders. Adhesion properties could become worse. Primers based on W´Dur D 6311 show good application properties (brush application), good flow and good adhesion properties. view less | |
| WorléeKyd S 351 (60% In Dearomatized HC 180-220) | Worlée-Chemie G.m.b.H. | WorléeKyd S 351 (60% In Dearomatized HC 180-220) is a medium oil, air drying alkyd resin used for the manufacture of fillers with structural viscosity for brushing, primer surfacers, and semi-gloss and flat wall paints. W´Kyd S 351 is completely compatibl...view more WorléeKyd S 351 (60% In Dearomatized HC 180-220) is a medium oil, air drying alkyd resin used for the manufacture of fillers with structural viscosity for brushing, primer surfacers, and semi-gloss and flat wall paints. W´Kyd S 351 is completely compatible with most airdrying medium and long oil alkyd resins, with maleic resins and phenolic modified rosins, with raw oils and chlorinated rubber. W´Kyd S 351 is partially compatible with low viscous stand oils. view less | |
| WorléeKyd S 351(50% In Isoparaffin HC 170-200) | Worlée-Chemie G.m.b.H. | WorléeKyd S 351(50% In Isoparaffin HC 170-200) is a medium oil, air drying alkyd resin used for the manufacture of fillers with structural viscosity for brushing, primer surfacers, and semi-gloss and flat wall paints. It has an oil content of approx. 51%....view more WorléeKyd S 351(50% In Isoparaffin HC 170-200) is a medium oil, air drying alkyd resin used for the manufacture of fillers with structural viscosity for brushing, primer surfacers, and semi-gloss and flat wall paints. It has an oil content of approx. 51%. W´Kyd S 351 is completely compatible with most airdrying medium and long oil alkyd resins, with maleic resins and phenolic modified rosins, with raw oils and chlorinated rubber. W´Kyd S 351 is partially compatible with low viscous stand oils. view less | |
| WorléeKyd S 351(50% In White Spirit 180-210) | Worlée-Chemie G.m.b.H. | WorléeKyd S 351(50% In White Spirit 180-210) is a medium oil, air drying alkyd resin used for the manufacture of fillers with structural viscosity for brushing, primer surfacers, and semi-gloss and flat wall paints. W´Kyd S 351 is completely compatible wi...view more WorléeKyd S 351(50% In White Spirit 180-210) is a medium oil, air drying alkyd resin used for the manufacture of fillers with structural viscosity for brushing, primer surfacers, and semi-gloss and flat wall paints. W´Kyd S 351 is completely compatible with most airdrying medium and long oil alkyd resins, with maleic resins and phenolic modified rosins, with raw oils and chlorinated rubber. W´Kyd S 351 is partially compatible with low viscous stand oils. view less | |
| WorléeKyd S 5101 | Worlée-Chemie G.m.b.H. | WorléeKyd S 5101 is a medium oil, airdrying alkyd resin used for the manufacture of fillers with structural viscosity for brushing, primer surfacers, and semi-gloss and flat wall paints. W´Kyd S 5101 is completely compatible with most airdrying medium and...view more WorléeKyd S 5101 is a medium oil, airdrying alkyd resin used for the manufacture of fillers with structural viscosity for brushing, primer surfacers, and semi-gloss and flat wall paints. W´Kyd S 5101 is completely compatible with most airdrying medium and long oil alkyd resins, with maleic resins and phenolic modified rosins, with raw oils and chlorinated rubber. W´Kyd S 5101 is partially compatible with low viscous stand oils. view less |
