| Coronate® 2507 | Tosoh Corporation | Coronate® 2507, in the form of a pale yellow to brownish flakes, is an isocyanate that is masked with blocking agents (E-caprolactam and phenol). This blocked isocyanate can be applied as baking finishes for coil coatings, wire, rubber, plastics, metals, ...view more Coronate® 2507, in the form of a pale yellow to brownish flakes, is an isocyanate that is masked with blocking agents (E-caprolactam and phenol). This blocked isocyanate can be applied as baking finishes for coil coatings, wire, rubber, plastics, metals, and more. view less | |
| Coronate® 2513 | Tosoh Corporation | Coronate® 2513, in the form of a pale yellow to brownish flakes, is an isocyanate that is masked with blocking agents (E-caprolactam and phenol). This blocked isocyanate can be applied as baking finishes for coil coatings, wire, rubber, plastics, metals, ...view more Coronate® 2513, in the form of a pale yellow to brownish flakes, is an isocyanate that is masked with blocking agents (E-caprolactam and phenol). This blocked isocyanate can be applied as baking finishes for coil coatings, wire, rubber, plastics, metals, and more. view less | |
| Coronate® AP-M | Tosoh Corporation | Coronate® AP-M, in the form of a pale yellow to brownish flakes, is an isocyanate that is masked with blocking agents (E-caprolactam and phenol). This blocked isocyanate can be applied as baking finishes for coil coatings, wire, rubber, plastics, metals, ...view more Coronate® AP-M, in the form of a pale yellow to brownish flakes, is an isocyanate that is masked with blocking agents (E-caprolactam and phenol). This blocked isocyanate can be applied as baking finishes for coil coatings, wire, rubber, plastics, metals, and more. view less | |
| Coronate® BI-301 | Tosoh Corporation | Coronate® BI-301, in the form of a pale yellow to brownish flakes, is an isocyanate that is masked with blocking agents (E-caprolactam and phenol). This blocked isocyanate can be applied as baking finishes for coil coatings, wire, rubber, plastics, metals...view more Coronate® BI-301, in the form of a pale yellow to brownish flakes, is an isocyanate that is masked with blocking agents (E-caprolactam and phenol). This blocked isocyanate can be applied as baking finishes for coil coatings, wire, rubber, plastics, metals, and more. view less | |
| Polurene MBD 2 | S.A.P.I.C.I. SpA | Polurene MBD 2 is a blocked isocyanate. This product should be used in non-yellowing 1K stoving enamels. It can be used in traditional stoving enamels in order to increase flexibility and adhesion. | |
| Nourybond® 289 Adhesion Promoter | Evonik Operations GmbH, BL Crosslinkers | Nourybond® 289 Adhesion Promoter is a blocked isocyanate PVC plastisol adhesion promoter intended for use in automotive sealants applied to visible areas and anti-chip primers. It is designed to provide adhesion to electrodeposition primers used in the m...view more Nourybond® 289 Adhesion Promoter is a blocked isocyanate PVC plastisol adhesion promoter intended for use in automotive sealants applied to visible areas and anti-chip primers. It is designed to provide adhesion to electrodeposition primers used in the manufacture of automobiles, trucks and buses. view less | Request Sample |
| VESTAMIN® A 139 | Evonik Operations GmbH, BL Crosslinkers | VESTAMIN® A 139 is a liquid, blocked crosslinker for polyisocyanate resins based on a cycloaliphatic diamine. The crosslinking with polyisocyanate resins occurs under the influence of moisture by releasing the original diamine, which is spontaneously reac...view more VESTAMIN® A 139 is a liquid, blocked crosslinker for polyisocyanate resins based on a cycloaliphatic diamine. The crosslinking with polyisocyanate resins occurs under the influence of moisture by releasing the original diamine, which is spontaneously reacting with the isocyanate groups under formation of urea structures. VESTAMIN® grades are curing agents for epoxy resin systems, chain extenders for polyurethane systems, raw materials for polyamides and accelerators for moisture curing PUR systems. view less | Request Sample |
| VESTANAT® B 1358/100 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® B 1358/100 is a solvent-free, blocked polyisocyanate, based on isophorone diisocyanate (VESTANAT IPDI). It is supplied in flakes. This product is suitable for hydroxylated resins, like polyester, acrylic and alkyd resins. VESTANAT® grades are al...view more VESTANAT® B 1358/100 is a solvent-free, blocked polyisocyanate, based on isophorone diisocyanate (VESTANAT IPDI). It is supplied in flakes. This product is suitable for hydroxylated resins, like polyester, acrylic and alkyd resins. VESTANAT® grades are aliphatic diisocyanate monomers for light stable PUR systems and polyisocyanate crosslinkers for high performance PUR coatings. view less | Request Sample |
| VESTANAT® B 1358 A | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® B 1358 A is a blocked, cycloaliphatic polyisocyanate. It is supplied as a 63% solution in Solvesso 100. This product is a blocked polyisocyanate for crosslinking of suitable hydroxylated resins, like polyester, acrylic and alkyd resins. VESTANAT...view more VESTANAT® B 1358 A is a blocked, cycloaliphatic polyisocyanate. It is supplied as a 63% solution in Solvesso 100. This product is a blocked polyisocyanate for crosslinking of suitable hydroxylated resins, like polyester, acrylic and alkyd resins. VESTANAT® B 1358 A may be classified as an exceptionally light fast and weathering resistant hardener. It is characterized by an excellent balance of reactivity and storage stability of the formulated paint. VESTANAT® grades are aliphatic diisocyanate monomers for light stable PUR systems and polyisocyanate crosslinkers for high performance PUR coatings. view less | Request Sample |
| Crelan® NI-2 | Covestro (formerly Bayer MaterialScience) 科思创 | Crelan® NI-2 has a hazen color value of maximum 100, a glass transition tempurature of 55-60, and a non-blocked NCO-content of maximum 1.0. It is a blocked cycloaliphatic polyisocyanate used as the hardener component with hydroxyl functional polyester or ...view more Crelan® NI-2 has a hazen color value of maximum 100, a glass transition tempurature of 55-60, and a non-blocked NCO-content of maximum 1.0. It is a blocked cycloaliphatic polyisocyanate used as the hardener component with hydroxyl functional polyester or acrylic resins. Coatings based on Crelan® NI-2 are characterized by their excellent flow properties and high gloss values. Depending on the polyester used, excellent gloss retention and chalking resistance in outdoor weathering can be obtained. view less | |
| Crelan® UI | Covestro (formerly Bayer MaterialScience) 科思创 | Crelan® UI has a hazen color value of maximum, and a non-blocked NCO-content of maximum 1.5%. This product is a blocked cycloaliphatic polyisocyanate that can be used as a hardener for polyurethane powder coatings. Coatings based on Crelan® NW-5 are chara...view more Crelan® UI has a hazen color value of maximum, and a non-blocked NCO-content of maximum 1.5%. This product is a blocked cycloaliphatic polyisocyanate that can be used as a hardener for polyurethane powder coatings. Coatings based on Crelan® NW-5 are characterized by their excellent flow properties and high gloss values. Depending on the polyester used, excellent gloss retention and chalking resistance in outdoor weathering can be obtained. view less | |
| Crelan® NW-5 | Covestro (formerly Bayer MaterialScience) 科思创 | Crelan® NW-5 has a hazen color value of maximum 100, a glass transition tempurature of 48-58, and a non-blocked NCO-content of maximum < 1.5. This product is a blocked cycloaliphatic polyisocyanate that can be used as a hardener for polyurethane powder co...view more Crelan® NW-5 has a hazen color value of maximum 100, a glass transition tempurature of 48-58, and a non-blocked NCO-content of maximum < 1.5. This product is a blocked cycloaliphatic polyisocyanate that can be used as a hardener for polyurethane powder coatings. Coatings based on Crelan® NW-5 are characterized by their excellent flow properties and high gloss values. Depending on the polyester used, excellent gloss retention and chalking resistance in outdoor weathering can be obtained. view less | |
| VESTANAT® B 1358 DINP | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® B 1358 DINP is a blocked polyisocyanate for liquid applications. It is recommended for heat-curing 1K PUR coatings. | Request Sample |
| VESTANAT® EP-B 1042 E | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-B 1042 E is a blocked polyisocyanate for liquid applications. It is recommended for heat-curing 1K PUR coatings. | Request Sample |
| VESTANAT® EP-B 1581 E | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-B 1581 E is a blocked polyisocyanate for liquid applications. It is recommended for heat-curing 1K PUR coatings. | Request Sample |
| VESTANAT® EP-B 1481 ND | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-B 1481 ND is a caprolactam-blocked polyisocyanate for liquid applications. It is flexible, and can be used for coil coatings. | Request Sample |
| Polurene LP 80 LV | S.A.P.I.C.I. SpA | Polurene LP 80 LV is a TDI-based branched polymer in DOA containing blocked and curable isocyanic groups. This product has very low viscosity and good rheology. It can be used to improve the flexibility of epoxy systems for adhesives, sealants, and memb...view more Polurene LP 80 LV is a TDI-based branched polymer in DOA containing blocked and curable isocyanic groups. This product has very low viscosity and good rheology. It can be used to improve the flexibility of epoxy systems for adhesives, sealants, and membranes. view less | |
| Desmodur® VL 9010 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® VL 9010 is an aromatic polyisocyanate based on diphenylmethane diisocyanate that can be used as a raw material for blocked isocyanates. It is a solvent-free, brown liquid with an equivalent weight of approx. 130, a density at 20°C of approx. 1.2...view more Desmodur® VL 9010 is an aromatic polyisocyanate based on diphenylmethane diisocyanate that can be used as a raw material for blocked isocyanates. It is a solvent-free, brown liquid with an equivalent weight of approx. 130, a density at 20°C of approx. 1.21g/ml, and a flash point of approx. 193°C. view less | |
| Desmodur® PL 340 BA/SN | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® PL 340 BA/SN is a blocked aliphatic polyisocyanate based on IPDI, and used in combination with polyol components for the formulation of lightfast one-component polyurethane stoving coatings. This product has a non-volatile content (0.2g/60 min./...view more Desmodur® PL 340 BA/SN is a blocked aliphatic polyisocyanate based on IPDI, and used in combination with polyol components for the formulation of lightfast one-component polyurethane stoving coatings. This product has a non-volatile content (0.2g/60 min./125°C) 60 ± 2%, a viscosity at 23°C 600 ± 50 mPa·s, an equivalent weight of approx. 575, and a blocked NCO content of approx. 7.3%. Desmodur® PL 340 BA/SN can be combined with suitable, preferably flexible, Desmophen® grades to formulate one-component polyurethane stoving coatings which are lightfast and resistant to weathering and chemicals and highly resistant to thermal yellowing. These coatings are used for original automotive topcoats. Compared with polyisocyanates blocked with butanone oxime, Desmodur® PL 340 allows a reduction in stoving temperature of approx. 10 °C, with no decrease in solvent and chemical resistance. view less | |
| Polurene BK 50 AE | S.A.P.I.C.I. SpA | Polurene BK 50 AE is a TDI-based polymer containing blocked and curable isocyanic groups. This product can be used as an adhesive in non-woven fabrics, PVC, and fabric laminations, among other uses. It contains 50% non-volatiles. | |
| Crelan® VP LS 2256 | Covestro (formerly Bayer MaterialScience) 科思创 | Crelan® VP LS 2256 is a blocked cycloaliphatic polyisocyanate used as the hardener component for hydroxyl-bearing polyesters in the manufacture of polyurethane powder coatings for electrostatic spray application. It has a hazen color value of maximum 100,...view more Crelan® VP LS 2256 is a blocked cycloaliphatic polyisocyanate used as the hardener component for hydroxyl-bearing polyesters in the manufacture of polyurethane powder coatings for electrostatic spray application. It has a hazen color value of maximum 100, a glass transition tempurature of 46-58, and a non-blocked NCO-content of maximum 1.0. Crelan® VP LS 2256 is used to harden hydroxyl-bearing polyesters. An OH : NCO ratio of 1 is recommended to produce optimum film properties. Coatings based on Crelan® VP LS 2256 are characterized by their excellent flow properties and high gloss. Depending on the suitability of the polyester chosen, excellent gloss retention and chalking resistance can be achieved on outdoor weathering. view less | |
| VESTANAT® B 1186 A | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® B 1186 A is a caprolactam-blocked polyisocyanate. It offers low yellowing even at high curing temperatures, and is approved for direct food contact in interior can applications. This product is also recommended for heat-curing 1K PUR coatings. | Request Sample |
| Bayhydur® BL XP 2706 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydur® BL XP 2706 is a reactive, blocked aliphatic polyisocyanate used in combination with Bayhydrol® polyols for the formulation of water-reducible, lightfast one-component polyurethane baking coatings and as an additive in waterborne baking systems t...view more Bayhydur® BL XP 2706 is a reactive, blocked aliphatic polyisocyanate used in combination with Bayhydrol® polyols for the formulation of water-reducible, lightfast one-component polyurethane baking coatings and as an additive in waterborne baking systems to improve hardness, impact strength, chemical resistance and adhesion. view less | |
| VESTANAT® EP-IPMS | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-IPMS is an isocyanate building block for the preparation of silane modified urethane resins. These resins may be used for the production of isocyanate-free, moisture curing adhesives, sealants and weatherable, UV- and ...view more VESTANAT® EP-IPMS is an isocyanate building block for the preparation of silane modified urethane resins. These resins may be used for the production of isocyanate-free, moisture curing adhesives, sealants and weatherable, UV- and scratch-resistant coatings. view less | Request Sample |
| Bayhydur® BL 5335 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydur® BL 5335 is a hydrophilized, blocked aliphatic polyisocyanate based on Desmodur® W, in combination with Bayhydrol® grade OH-functional polymers for the formulation of lightfast, single-component polyurethane baking coatings. This product has a no...view more Bayhydur® BL 5335 is a hydrophilized, blocked aliphatic polyisocyanate based on Desmodur® W, in combination with Bayhydrol® grade OH-functional polymers for the formulation of lightfast, single-component polyurethane baking coatings. This product has a non-volatile content (1g / 1h / 105°C) of 34-36, a flow time at 23°C, (4mmcup) of 10-30, a pH at 20°C of 4.4-6.0. Bayhydur® BL 5335 is a blocked polyisocyanate and was developed for industrial use. It is used as a hardener for the formulation of lightfast one-component polyurethane baking coatings suitable for spray, dip or roller application. The product is preferably used in glass coating applications. It can be used in combination with Bayhydrol® U XP 2239 for the formulation of hydrolytically stable coatings with good glass adhesion and outstanding resistance to solvents and chemicals, in particular sodium hydroxide. Baking parameters are 30 minutes at 170°C. view less | |
| Desmodur® PL 350 MPA/SN | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® PL 350 MPA/SN is a blocked aliphatic polyisocyanate based on HDI used in combination with polyol components for the formulation of lightfast one-component polyurethane stoving coatings. This product has a non-volatile content (0.2g/60 min./80°C)...view more Desmodur® PL 350 MPA/SN is a blocked aliphatic polyisocyanate based on HDI used in combination with polyol components for the formulation of lightfast one-component polyurethane stoving coatings. This product has a non-volatile content (0.2g/60 min./80°C) 75 ± 2%, a viscosity at 23°C 4,300 ± 1,500 mPa·s, and an equivalent weight of approx. 400. Combined with suitable Desmophen® products, Desmodur® PL 350 MPA/SN can be used in the formulation of weather-stable, lightfast, chemically resistant and highly heat-stable one-component polyurethane stoving coatings for use in automotive finishing. Compared with polyisocyanates blocked with butanone oxime, Desmodur® PL 350 MPA/SN allows a reduction in the stoving temperature of approx. 10°C, with no decrease in solvent and chemical resistance. view less | |
| Crelan® EF 403 | Covestro (formerly Bayer MaterialScience) 科思创 | Crelan® EF 403 has a hazen color value of maximum 100, a glass transition tempurature of 40-55, and a non-blocked NCO-content of maximum 2.0. It is a cycloaliphatic polyuretdione without blocking agent that can be used as the hardener component in polyure...view more Crelan® EF 403 has a hazen color value of maximum 100, a glass transition tempurature of 40-55, and a non-blocked NCO-content of maximum 2.0. It is a cycloaliphatic polyuretdione without blocking agent that can be used as the hardener component in polyurethane powder coatings. Crelan® EF 403 was developed as a hardener for outdoor resistant polyurethane powder coatings. The films are characterized by their excellent impact resistance, good weather stability and good flow and gloss properties. view less | |
| VESTAGON® B 1530 | Evonik Operations GmbH, BL Crosslinkers | VESTAGON® B 1530 is a polyisocyanate adduct used in combination with hydroxy functional resins. Due to the ε-Caprolactam blocked NCO-groups, t is stable during processing up to the unblocking temperature of more than 170°C. The crosslinker is delivered in...view more VESTAGON® B 1530 is a polyisocyanate adduct used in combination with hydroxy functional resins. Due to the ε-Caprolactam blocked NCO-groups, t is stable during processing up to the unblocking temperature of more than 170°C. The crosslinker is delivered in the form of pellets. This crosslinking agent is used for polyurethane powder coating applications such as: motor vehicle parts; fittings; bicycle frames; fork lift trucks; exterior furniture and lawn equipment; agricultural machinery; appliances; and telephone booths. view less | Request Sample |
| Desmodur® BL 5375 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® BL 5375 is a blocked aliphatic polyisocyanate based on H12MDI. It can be used in combination with hydroxyl-bearing polyols, especially Desmophen® grades, to formulate lightfast one-component polyurethane stoving coatings; as an additive in conve...view more Desmodur® BL 5375 is a blocked aliphatic polyisocyanate based on H12MDI. It can be used in combination with hydroxyl-bearing polyols, especially Desmophen® grades, to formulate lightfast one-component polyurethane stoving coatings; as an additive in conventional stoving systems to improve adhesion and flexibility. This product has a non-volatile content (0.5g/60 min/60°C) of 75 ± 2%, a viscosity of 4000 ± 1500 mPa·s, and a color value (hazen) of ≤ 150. view less | |
| Desmodur® BL 3575/1 MPA/SN | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® BL 3575/1 MPA/SN is a blocked aliphatic polyisocyanate based on HDI, that can be used in combination with Desmophen® grades to formulate lightfast, one-component stoving polyurethane coatings. This product has a non-volatile content (0.2g/60 min...view more Desmodur® BL 3575/1 MPA/SN is a blocked aliphatic polyisocyanate based on HDI, that can be used in combination with Desmophen® grades to formulate lightfast, one-component stoving polyurethane coatings. This product has a non-volatile content (0.2g/60 min/80°C) of 75 ± 2%, a viscosity at 23°C of 3,600 ± 1,000 mPa·s, and a color value (hazen) of ≤ 100. view less | |
| Desmodur® BL 1100/1 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® BL 1100/1 is a blocked aromatic polyisocyanate based on TDI and is solvent-free. It can be used in combination with cycloaliphatic diamines such as Laromin® C 260 (BASF) to formulate highly flexible, one-component stoving coatings. This product ...view more Desmodur® BL 1100/1 is a blocked aromatic polyisocyanate based on TDI and is solvent-free. It can be used in combination with cycloaliphatic diamines such as Laromin® C 260 (BASF) to formulate highly flexible, one-component stoving coatings. This product has a color value (hazen) of ≤ 150, a viscosity at 23°C of 43,000 ± 10,000 mPa·s, and a free NCO content of < 0.2% view less | |
| K-FLEX® XM-337 | King Industries, Inc. | K-FLEX® XM-337 is an aliphatic saturated polyester diol modifier resin created to implement increased toughness and chemical resistance for solvent borne and high solids systems. It is recommended for use in 1 and 2 component polyurethanes, and blocked is...view more K-FLEX® XM-337 is an aliphatic saturated polyester diol modifier resin created to implement increased toughness and chemical resistance for solvent borne and high solids systems. It is recommended for use in 1 and 2 component polyurethanes, and blocked isocyanate systems. This product offers low color, UV durability, high hardness, high impact resistance, abrasion resistance and overall increased toughness. It appears as a clear liquid and is soluble in a lot of polar organic solvents such as glycols, alcohols, esters, ketones, aromatics, glycol ethers, and is not soluble in water and aliphatics. view less | |
| CRYLCOAT® 2890-0 | Allnex | CRYLCOAT® 2890-0 is a hydroxylated polyester resin for use with blocked isocyanates in the production of powder coatings. Coatings based on CRYLCOAT® 2890-0 exhibit outstanding flow and good outdoor durability. | Request Sample |
| VESTANAT® B 1370 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® B 1370 is a blocked, cycloaliphatic polyisocyanate. It is supplied as a solution of 60% in n-butyl-acetate/xylene. This product is characterized by an excellent balance of reactivity and storage stability of the formulated paint. It is suitable ...view more VESTANAT® B 1370 is a blocked, cycloaliphatic polyisocyanate. It is supplied as a solution of 60% in n-butyl-acetate/xylene. This product is characterized by an excellent balance of reactivity and storage stability of the formulated paint. It is suitable for automotive OEM topcoats with improved acid etch resistance. VESTANAT® grades are aliphatic diisocyanate monomers for light stable PUR systems and polyisocyanate crosslinkers for high performance PUR coatings. view less | Request Sample |
| VESTAGON® B 1400 | Evonik Operations GmbH, BL Crosslinkers | VESTAGON® B 1400 is a crosslinking agent for polyurethane powder coatings. It is a polyisocyanate adduct used in combination with hydroxy functional resins. Due to the ε-Caprolactam blocked NCO-groups, it is stable during processing up to the unblocking t...view more VESTAGON® B 1400 is a crosslinking agent for polyurethane powder coatings. It is a polyisocyanate adduct used in combination with hydroxy functional resins. Due to the ε-Caprolactam blocked NCO-groups, it is stable during processing up to the unblocking temperature of more than 160°C. The crosslinker is delivered in the form of pellets. These polyols have a determining influence on the performance of the coating. PUR powder coatings have been successfully used in both exterior and interior applications such as: motor vehicle parts; fittings; bicycle frames; fork lift trucks; exterior furniture and lawn equipment; agricultural machinery; appliances; and telephone booths. view less | Request Sample |
| CRYLCOAT® E 04362 | Allnex | CRYLCOAT® E 04362 is a superdurable hydroxyl functional polyester resin for use with blocked isocyanates or uretdiones. Coatings based on this product exhibit outstanding outdoor resistance. | Request Sample |
| K-FLEX® XM-332 | King Industries, Inc. | K-FLEX® XM-332 is a low viscosity polyester polyol modifier resin that provides enhanced flexibility in solvent-borne, high solids, and solventless systems. It is recommended for use in air dry/force dry 2-component polyurethanes and blocked isocyanate sy...view more K-FLEX® XM-332 is a low viscosity polyester polyol modifier resin that provides enhanced flexibility in solvent-borne, high solids, and solventless systems. It is recommended for use in air dry/force dry 2-component polyurethanes and blocked isocyanate systems. It appears as a light colored liquid, is 100% active, and offers good flexibility and hydrolytic stability. This product is soluble in aromatics and polar organic solvents like ketones, alcohols, glycols, esters, and glycol ethers. Two things that it is not soluble in are aliphatics and water. K-FLEX® XM-332 can be applied in structural adhesives, thermoplastic urethanes, plastic coatings, cast elastomer prepolymers, and automotive topcoats and OEM coatings. view less | |
| SYNTHALAT A-TS 3371 | Synthopol Chemie Germany | SYNTHALAT A-TS 3371 is a powdered acrylic resin containing hydroxyl groups. It is recommended for curing with amino resins and/or blocked isocyanates. This product is also used for weathering- and chemical-resistant stoved coatings with stoving temperatur...view more SYNTHALAT A-TS 3371 is a powdered acrylic resin containing hydroxyl groups. It is recommended for curing with amino resins and/or blocked isocyanates. This product is also used for weathering- and chemical-resistant stoved coatings with stoving temperatures above 120°C. view less | |
| CRYLCOAT® E 04375 | Allnex | CRYLCOAT® E 04375 is a hydroxyl functional, superdurable polyester resin for use with blocked isocyanates or uretdiones, preferably in combination with higher functional counterparts for the production of matte one shot powder coatings. | Request Sample |
| Desmodur® VP LS 2257 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® VP LS 2257 is a blocked aliphatic polyisocyanate based on HDI. It can be used in combination with OH-functional polyols, preferably Desmophen® T-grade OH-functional polyesters, in the formulation of lightfast, one-component polyurethane baking c...view more Desmodur® VP LS 2257 is a blocked aliphatic polyisocyanate based on HDI. It can be used in combination with OH-functional polyols, preferably Desmophen® T-grade OH-functional polyesters, in the formulation of lightfast, one-component polyurethane baking coatings, especially in coil and can coating applications. This product has a non-volatile content (0.2g / 60min / 80°C) of approx. 70%, a viscosity at 23°C of approx. 2,300 mPa·s, and a color value (Hazen/APHA) of ≤ 100. Desmodur® VP LS 2257 was developed as the hardener for lightfast one-compnent polyurethane coatings whose stoving temperature can be reduced by the addition of a catalyst, e.g. 0.3 - 1.0% dibutyltin dilaurate (DBTL), without adversely affecting the storage stability of the ready-to-use coatings. view less | |
| CRYLCOAT® 2845-0 | Allnex | CRYLCOAT® 2845-0 is a hydroxyl functional polyester resin with for use with blocked polyisocyanates or uretdiones in the production of powder coatings. Systems based on CRYLCOAT® 2845-0 require less blocked polyisocyanate without affecting the good overal...view more CRYLCOAT® 2845-0 is a hydroxyl functional polyester resin with for use with blocked polyisocyanates or uretdiones in the production of powder coatings. Systems based on CRYLCOAT® 2845-0 require less blocked polyisocyanate without affecting the good overall properties. view less | Request Sample |
| CRYLCOAT® 2818-0 | Allnex | CRYLCOAT® 2818-0 is a hydroxyl functional polyester resin with for use with blocked aliphatic and aromatic isocyanates in the production of powder coatings. CRYLCOAT® 2818-0 is also suitable for use with polyanhydride hardeners like BECKOPOX® EH 694 to ob...view more CRYLCOAT® 2818-0 is a hydroxyl functional polyester resin with for use with blocked aliphatic and aromatic isocyanates in the production of powder coatings. CRYLCOAT® 2818-0 is also suitable for use with polyanhydride hardeners like BECKOPOX® EH 694 to obtain high Tg, thermal resistant coatings. view less | Request Sample |
| VESTAGON® BF 1320 | Evonik Operations GmbH, BL Crosslinkers | VESTAGON® BF 1320 is a polyisocyanate adduct used in combination with hydroxy functional resins. Because of an internal blocking mechanism, the product retains its processing stability up to the splitting temperature of approximately 160°C. The crosslinke...view more VESTAGON® BF 1320 is a polyisocyanate adduct used in combination with hydroxy functional resins. Because of an internal blocking mechanism, the product retains its processing stability up to the splitting temperature of approximately 160°C. The crosslinker is delivered in the form of fine granules. view less | Request Sample |
| VESTAGON® BF 1321 | Evonik Operations GmbH, BL Crosslinkers | VESTAGON® BF 1321 is a polyisocyanate adduct used in combination with hydroxy functional resins. Because of an internal blocking mechanism, the product retains its processing stability up to the splitting temperature of approximately 160 °C. Th...view more VESTAGON® BF 1321 is a polyisocyanate adduct used in combination with hydroxy functional resins. Because of an internal blocking mechanism, the product retains its processing stability up to the splitting temperature of approximately 160 °C. The crosslinker is delivered in the form of fine granules. view less | Request Sample |
| Polurene LP 90 LV | S.A.P.I.C.I. SpA | Polurene LP 90 LV is a TDI-based branched polymer in DOA containing blocked and curable isocyanic groups. This product has very low viscosity and good rheology. It can be used to improve the flexibility of epoxy systems for adhesives, sealants, and memb...view more Polurene LP 90 LV is a TDI-based branched polymer in DOA containing blocked and curable isocyanic groups. This product has very low viscosity and good rheology. It can be used to improve the flexibility of epoxy systems for adhesives, sealants, and membranes. view less | |
| Italester 205 | Galstaff Multiresine S.p.A. | Italester 205 is a hydroxylated polyester for can coatings in combination with Itamin (M and BG) resins or with blocked isocyanates (Uronal BN 75). Italester 205 is more flexible than Italester 203 and has a good adhesion sterilization resistance on crude...view more Italester 205 is a hydroxylated polyester for can coatings in combination with Itamin (M and BG) resins or with blocked isocyanates (Uronal BN 75). Italester 205 is more flexible than Italester 203 and has a good adhesion sterilization resistance on crude steel, galvanized and on aluminum. It complies with European legislation for indirect food contract (Swiss Ordinance RS 817.023.21 Annexx 6, Part A or B). view less | |
| Ekosol ES 1500T | T&L Co., Ltd. Polymer Technology Centre | Ekosol ES 1500T is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring soft feel and high transparency. This product is ideal for use in direct screen printing ink applications. | |
| Ekosol ES 2500 | T&L Co., Ltd. Polymer Technology Centre | Ekosol ES 2500 is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring dry and slippery feel, compatibility with transfer release paper, and reduced tack. This product is ideal for use in heat transfer printing applicat...view more Ekosol ES 2500 is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring dry and slippery feel, compatibility with transfer release paper, and reduced tack. This product is ideal for use in heat transfer printing applications. view less | |
| Ekosol ES 2600 | T&L Co., Ltd. Polymer Technology Centre | Ekosol ES 2600 is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring soft feel, excellent elongation, and compatibility with transfer release paper. This product is ideal for use in heat transfer printing applications...view more Ekosol ES 2600 is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring soft feel, excellent elongation, and compatibility with transfer release paper. This product is ideal for use in heat transfer printing applications. view less | |
| Ekosol ES 3450A | T&L Co., Ltd. Polymer Technology Centre | Ekosol ES 3450A is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring soft feel and good adhesion to various substrates. This product is ideal for use as an adhesive in heat transfer printing, hot-peel transfer printi...view more Ekosol ES 3450A is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring soft feel and good adhesion to various substrates. This product is ideal for use as an adhesive in heat transfer printing, hot-peel transfer printing, and hot foil stamping applications. view less | |
| Ekosol ES 5300W | T&L Co., Ltd. Polymer Technology Centre | Ekosol ES 5300W is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - in the form of an adhesive ink containing white pigment. Benefits include shorter processing times and no need for an extra adhesive. This product is ideal f...view more Ekosol ES 5300W is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - in the form of an adhesive ink containing white pigment. Benefits include shorter processing times and no need for an extra adhesive. This product is ideal for use in hot-peel transfer printing and digitally printed white backing applications. view less | |
| Ekosol ES 1000 | T&L Co., Ltd. Polymer Technology Centre | Ekosol ES 1000 is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring hard feel, good non-tack properties, and excellent storage stability. This product is ideal for use in base coats for offset printing inks and synth...view more Ekosol ES 1000 is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring hard feel, good non-tack properties, and excellent storage stability. This product is ideal for use in base coats for offset printing inks and synthetic leather coatings. view less | |
| Desmophen® T 1775 SN | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen T 1775 SN is an oil free, hydroxyl-bearing polyester that is used in the formulation of lightfast one-component polyurethane baking coatings with blocked aliphatic polyisocyanates. It is binder certified for use in food-contact applications for...view more Desmophen T 1775 SN is an oil free, hydroxyl-bearing polyester that is used in the formulation of lightfast one-component polyurethane baking coatings with blocked aliphatic polyisocyanates. It is binder certified for use in food-contact applications for the formulation of can coatings for food packaging. This product has a non-volatile content (2g resin/2ml toluene/1h 125°C/convection oven) of 75 ± 2%, a density at 20°C of approx. 1.08g/ml, and a viscosity at 23°C of 3,700 ± 600 mPa·s. Desmophen T 1775 SN was developed specially as a co-reactant for blocked polyisocyanates in coil coating applications. When combined with preferably Desmodur BL 4265, it yields one-component polyurethane coil coatings with a balanced hardness/flexibility ratio, good resistance to scratching and abrasion as well as excellent QUV/B stability. Dibutyltin dilaurate has proved suitable as the catalyst. The addition should be 0.1–1 %, calculated on the solid binder. The product can be combined with other blocked isocyanates and HMMM-type amino resins. However, such formulations do not generally achieve the same high surface hardness as is achieved with Desmodur BL 4265. view less | |
| VESTAGON® EP-BF 1350 | Evonik Operations GmbH, BL Crosslinkers | VESTAGON® EP-BF 1350 is a polyisocyanate adduct used in combination with hydroxy functional resins. Because of an internal blocking mechanism, the product retains its processing stability up to the splitting temperature of approximately 160°C. The crossli...view more VESTAGON® EP-BF 1350 is a polyisocyanate adduct used in combination with hydroxy functional resins. Because of an internal blocking mechanism, the product retains its processing stability up to the splitting temperature of approximately 160°C. The crosslinker is delivered in the form of fine granules. Numerous OH-terminated polyester and acrylics can be used to achieve weather-resistant decorative powder coatings with excellent physical properties. view less | Request Sample |
| Joncryl® 8300 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Joncryl® 8300 is a rheology controlled acrylic emulsion for thermoset water-based industrial metal, metallic and glass coatings. It can be used to produce interior or exterior coatings. This product provides excellent application properties particularly with spray and roller coat. The product is low on foaming, with excellent pigment dispersing properties, very high gloss, and adhesion to a great variety of substrates. Joncryl® 8300 is hydroxyl functional for crosslinking with melamines or with blocked...view more Joncryl® 8300 is a rheology controlled acrylic emulsion for thermoset water-based industrial metal, metallic and glass coatings. It can be used to produce interior or exterior coatings. This product provides excellent application properties particularly with spray and roller coat. The product is low on foaming, with excellent pigment dispersing properties, very high gloss, and adhesion to a great variety of substrates. Joncryl® 8300 is hydroxyl functional for crosslinking with melamines or with blocked isocyanates. view less | |
| VESTANAT® T 1890M | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® T 1890M is a cycloaliphatic polyisocyanate based on isophorone diisocyanate. It contains isocyanurate groups and has a NCO-functionality between 3 and 4. It is used as a crosslinker in paints based on suitable polyesters, acrylates, flexible medium-oil or short-oil alkyd resins and other resins...view more VESTANAT® T 1890M is a cycloaliphatic polyisocyanate based on isophorone diisocyanate. It contains isocyanurate groups and has a NCO-functionality between 3 and 4. It is used as a crosslinker in paints based on suitable polyesters, acrylates, flexible medium-oil or short-oil alkyd resins and other resins containing OH-groups. view less | Request Sample |
| VESTANAT® T 1890 L | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® T 1890 L is a cycloaliphatic polyisocyanate based on isophorone diisocyanate. It contains isocyanurate groups and has a NCO-functionality between 3 and 4. It is used as a crosslinker in paints based on suitable polyesters, acrylates, flexible medium-oil or short-oil alkyd resins and other resins...view more VESTANAT® T 1890 L is a cycloaliphatic polyisocyanate based on isophorone diisocyanate. It contains isocyanurate groups and has a NCO-functionality between 3 and 4. It is used as a crosslinker in paints based on suitable polyesters, acrylates, flexible medium-oil or short-oil alkyd resins and other resins containing OH-groups. VESTANAT® grades are aliphatic diisocyanate monomers for light stable PUR systems and polyisocyanate crosslinkers for high performance PUR coatings. view less | Request Sample |
| VESTAGON® BF 1540 | Evonik Operations GmbH, BL Crosslinkers | VESTAGON® BF 1540 is a crosslinking agent for polyurethane powder coatings. It is a polyisocyanate adduct used in combination with hydroxy functional resins. Because of an internal blocking mechanism, the product retains its processing stability up to the...view more VESTAGON® BF 1540 is a crosslinking agent for polyurethane powder coatings. It is a polyisocyanate adduct used in combination with hydroxy functional resins. Because of an internal blocking mechanism, the product retains its processing stability up to the splitting temperature of approximately 160°C. The crosslinker is delivered in the form of shaped flakes. Numerous OH-terminated polyester and acrylics can be used to achieve weather-resistant decorative powder coatings with excellent physical properties. These polyols have a determining influence on the performance of the coating. PUR powder coatings have been successfully used in both exterior and interior applications such as: motor vehicle parts; fittings; bicycle frames; fork lift trucks; exterior furniture and lawn equipment; agricultural machinery; appliances; and telephone booths. view less | Request Sample |
| VESTANAT® TMDI | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® TMDI is an aliphatic diisocyanate, methyl group branched. It is used for the manufacturing of light and weather resistant polyurethanes with good light and weather resistance. It is a low viscosity, colourless liquid with a weak but specific odour. This product is also used for the manufacturing of urethane resins...view more VESTANAT® TMDI is an aliphatic diisocyanate, methyl group branched. It is used for the manufacturing of light and weather resistant polyurethanes with good light and weather resistance. It is a low viscosity, colourless liquid with a weak but specific odour. This product is also used for the manufacturing of urethane resins for coatings. view less | Request Sample |
| AS-500 | Chan Sieh Enterprises Co, Ltd. | AS-500 is an isocyanate ester polymer adhesive. This product appears as a white emulsion. It can be used in the construction of solid wood parquet flooring, artificial laminate strip blocking, the assembly of laminate plank floors, the construction of p...view more AS-500 is an isocyanate ester polymer adhesive. This product appears as a white emulsion. It can be used in the construction of solid wood parquet flooring, artificial laminate strip blocking, the assembly of laminate plank floors, the construction of plywood, and the construction of furniture. This product in particular is a two-component adhesive. If one mixes it with cross-linking agent CA-30, it will cure at low temperatures. AS-500 provides strong adhesion and is resistant to boiling water. This product contains no toxic or harmful ingredients like formalin or formaldehyde. view less | |
| VESTANAT® IPDI | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® IPDI is a cycloaliphatic diisocyanate and as such a prefered raw material for the synthesis of lightstable and weather-resistant polyurethanes. It is a low-viscosity liquid with a weak but specific odour. VESTANAT® grades are aliphatic diisocyan...view more VESTANAT® IPDI is a cycloaliphatic diisocyanate and as such a prefered raw material for the synthesis of lightstable and weather-resistant polyurethanes. It is a low-viscosity liquid with a weak but specific odour. VESTANAT® grades are aliphatic diisocyanate monomers for light stable PUR systems and polyisocyanate crosslinkers for high performance PUR coatings. view less | Request Sample |
| VESTANAT® T 1890 E | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® T 1890 E is a cycloaliphatic polyisocyanate based on isophorone diisocyanate. It contains isocyanurate groups and has a NCO-functionality between 3 and 4. It is available in n-butyl acetate and is a low viscosity liquid. VESTANAT® grades are ali...view more VESTANAT® T 1890 E is a cycloaliphatic polyisocyanate based on isophorone diisocyanate. It contains isocyanurate groups and has a NCO-functionality between 3 and 4. It is available in n-butyl acetate and is a low viscosity liquid. VESTANAT® grades are aliphatic diisocyanate monomers for light stable PUR systems and polyisocyanate crosslinkers for high performance PUR coatings. view less | Request Sample |
| VESTANAT® T 1890/100 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® T 1890/100 is a cycloaliphatic polyisocyanate based on isophorone diisocyanate. The basic structure is the isocyanurate ring, and its NCO-functionality is between 3 and 4. It is a solvent-free material, supplied as pellets. | Request Sample |
| Baybond® XL 7270 | Covestro (formerly Bayer MaterialScience) 科思创 | Baybond® XL 7270 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product has a non-volatile content (0.9 - 1.1g / 1h / 125°C, convection oven) of 30 ± 1, a flow time at 23°C, (4mmcup)...view more Baybond® XL 7270 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product has a non-volatile content (0.9 - 1.1g / 1h / 125°C, convection oven) of 30 ± 1, a flow time at 23°C, (4mmcup) of 10-14, and a pH value at 20°C (supply form) of 7-8. Baybond® XL 7270 was developed as crosslinker for the sizing of glass fibers used in combination with Baybond binders to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® XL 7270 are characterized by their good colorfastness, even at elevated temperatures. The mechanical film properties of sizings based on Baybond® XL 7270 are developed fully by postcrosslinking at temperatures from 170°C for a duration of 20 minutes. The product is compatible with the additives normally used in the formulation of glass sizes, e.g. adhesion promoters, lubricants, antistatic agents and plasticizers. view less | |
| Baybond® XL 825 | Covestro (formerly Bayer MaterialScience) 科思创 | Baybond® XL 825 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product non-volatile content (0.9 - 1.1g / 1h / 125°C,convection oven) 30 ± 1, a flow time at 23°C, (4mmcup) of 10 - 5...view more Baybond® XL 825 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product non-volatile content (0.9 - 1.1g / 1h / 125°C,convection oven) 30 ± 1, a flow time at 23°C, (4mmcup) of 10 - 55 , and a pH value at 20°C (supply form) of 7-8. Baybond® XL 825 was developed as crosslinker for the sizing of glass fibers used in combination with Baybond binders to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® XL 825 are characterized by their good colorfastness, even at elevated temperatures. The mechanical film properties of sizings based on Baybond® XL 825 are developed fully by postcrosslinking at temperatures from 170°C for a duration of 20 minutes. The product is compatible with the additives normally used in the formulation of glass sizes, e.g. adhesion promoters, lubricants, antistatic agents and plasticizers. view less | |
| VESTANAT® H12MDI | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® H12MDI is a cycloaliphatic diisocyanate. It is a low-viscosity liquid with a characteristic odor. Due to its cycloaliphatic structure, this product is a suitable raw material for the manufacture of polyurethanes exhibiting light stability, weath...view more VESTANAT® H12MDI is a cycloaliphatic diisocyanate. It is a low-viscosity liquid with a characteristic odor. Due to its cycloaliphatic structure, this product is a suitable raw material for the manufacture of polyurethanes exhibiting light stability, weatherability and mechanical properties. VESTANAT® grades are aliphatic diisocyanate monomers for light stable PUR systems and polyisocyanate crosslinkers for high performance PUR coatings. view less | Request Sample |
